Accounting document not posted from billing document SD module

Dear Sir,
I am encounting a weird issue in SD module, that is when I am saving the billing document the system will generate accounting document automatically from my ID but when the same process will perform from the other ID having same rights and previligies then system prompt the folllowing message .
"Tax code C1 does not appear in any G/L account item"
It means the system allow a specific user to post accounting document with reference to billing document but not allowing to post from any other ID.
Apparently this issue related to basis module. we have checked in the basis area as well . still unable to get ane resolution for this issue.
Best Regards,
HASEEB KHAN
MM,PP,SD CONSULTANT

Hello Haseeb,
In that case, I would suggest you check Change Message Control for Taxes follow following path in SPRO:
IMG - Financial Accounting (New) - Tax on sales/purchases - Basic setting - Change Message Control for Taxes
Check corresponding doc to it and go through different Application Area, particularly, FF
Also refer SAP Note 495737 - Customizable messages in FI_TAX_SV_BSEG_BSET_GROSS
Hope this can assist you in understanding
Thanks & Regards
JP

Similar Messages

  • VAT accounting entry not created from Bill

    Hello,
    We are creating Bills but when we want to create the accounting entries there is no VAT line created although there was VAT on the Bill. Hence, the journal is unbalanced
    Any ideas how this is possible?
    I have an account assigned to my VAT Code...
    regards,
    Stijn

    Dear Mr. Bernhard
    In the Real depreciation Area ie Area 01 (Posting happens realtime), under "Value Maintenance" ---> Revaluation -
    > * All Values are allowed
    under "Entries for Derived Depreciation Area" , Depreciation sign field is blank
    regards
    Parag Bhargava

  • After I upgraded to OS x 10.7.5 my Mail account does not post mail, how come?

    After I upgraded to OS x 10.7.5 my Mail account does not post mail, how come?

    No. Tried all that. Server finally says they don't understand what's happening so better if I just delete accounts and set them up again from scratch. Haven't done that yet in hopes someone in the Apple world will have found a solution.

  • SD billing Accounting document Profit center not coming from billing doc

    Hi Expert,
        I have stuck with the accounting doc entries. Issue is that accounting document should have
        the same profit center as billing document. Actually i have created profit center for my each of
        my divisions and want the same profit center whenever that particular division  is selected. But it
       is not  working.
        I have tried with substitution  method also by t-codes 0KEL and 0KEM. It works correctly till
       billing document means division wise profit center is coming in order,delivery , and billing but
       when we check accounting document,Profit center doc. Controlling Document and Profitab.
       Analysis  in Delivery and Bill it is coming from what i have maintained in material master.
       But it should come from what is in the delivery and billing document.
        Please share your ideas.
       Thanks &  Regards

    Hi SAP Consultant
    I would not agree with the first reply above.
    When you define a substitution in 0KEL and 0KES, it is intended to overwrite the PC from Material Master. It is a wrong notion that this Substitution will only impact FI, and not CO / COPA
    1. Are you able to see the over-written PC in Sales Order? (I think YES)
    2. Are you able to see the over-written PC in Billing doc? (I think YES)
    3. If in FI doc you are not able to see that, then see where is the problem. Probable reasons would be a Substitution written in OBBH, You are having a CO Object in the line item, a user exit written in the exit SDVFX008
    Ask your ABAP to check on these lines, if 1 and 2 is YES
    Br, Ajay M

  • Why can I not post from my main account?

    I had to create a second account to post from - any idea why I get a "user xxxxx is not allowed to post"

    Hi,
    There is one forum that I know that might give you that response.
    That is the Users Tips Contribution Forum
    It is supposed to need Level 2 attainment before you can access it - but as the Discussions are becoming Apple Support Communities it may have been changed to Read only.
    Sometimes the Hosts do "Ban" someone from posting dues to too many infringements of the Terms of Use
    If this happens the person involved should get an email explaining this to the address the used to register the Account/ID.
    (It can get sent to any new Email that has been changed in the Posters Profile and sometimes it then gets sent to both).
    I must admit I had not thought, at all, about whether a banned Poster can actually still read the Discussions. (I had presumed their Login no longer worked.)
    8:28 PM Tuesday; February 15, 2011

  • Accounting entry not posted but MBEW table shows total stock and value

    Hi
    My R/3 version 4.7
    I have a material which is stockable and valuated of material type ERSA(Spare parts)
    This material was created in may 2007 and material ledger activated,i dont see master records in accounting view  in material price analysis tab for the month may 07 till aug 07,and i see master recordsfor the month sep 07 till jan 08
    For this particular material in the report MB51 for all the 3 material documents posted,there are no accounting entries in accounting document.
    Also in the report output the field amount in local currency is zero for all the 3 material documents.
    1.1st material document with mvt 202 for qty 1 posted in the month of may 07,no entries in acc.doc
    In this case,MSEG-DMBTR(amount in local currency) was not updated
    Also i dont see master records for this period in accounting view in material price analysis tab,in material master.
    2.2nd material document with mvt 261 posted for qty 1 in the month of nov,no entries in acc.doc
    In this case,MSEG-DMBTR(amount in local currency)was not updated.
    I see master records for this period in accounting view in material price analysis tab with stock 1 qty and value zero
    3.3rd material document with mvt 101 posted qty 1 in the month of dec,in this case once GR is done MSEG-DMBTR(amount in local currency) was not updated,but mbew has the entries for stock and value.  
    Can any one let me know why the system is not updating the mseg-dmbtr and as well affecting MB51 report
    Regards
    Ratha

    The settings in Customizing which define that no negative stocks are allowed for the storage type, have only an effect on the transfer orders. In addition, you must also set message L9040 as an error message. For this, call up the Customizing and branch to: 'Logistics Execution -> Warehouse Management -> Interfaces -> Inventory Management -> Allow negative Stocks in Interim Storage Types'. There, execute point 'Control of System Messages in Warehouse Management' and enter message type 'E' for message number L9040

  • Can TPM20 be used if not posting from TRM to FI ?

    Hello,
    I have (several) companies who's accounting system is not SAP.  However in SAP TRM:
    - posting rules, account assignment reference, position management procedures, etc... are all in place
    - all their treasury transaction are entered, settled in SAP TRM. We run TBB1, TMP44, TPM1 as for any SAP company because it generates useful information in TPM13.
    But, we are not really posting to FI, hence TPM20 gives nothing for such a non SAP FI company.
    Is there some smart and standard way to feed report TPM20 without posting documents in SAP FI?  Is it possible to "post" in the treasury ledger without interfacing to SAP FI.  The idea is to be able to generate a nice report for the external accountants what the ledger entries in their propriety accounting system should be.
    Thanks,
    Carl

    Hi,
    You cannot use TPM20 without posting to FI.  In fact in TPM13 reports also, you cannot view the posting journal because it has not posted to FI.  But my question is what is it you run in TBB1 or TPM44 without posting to FI?  Are the update types maintained as relevant for posting? If yes, what are the G/L accounts they are mapped to? 
    You can use TBB1_LC which is mainly used for legacy transfer and this will not post to accounting but will mark the treasury flows as posted.  This will be updated in Treasury TPM20 reports as well.
    I don't think there will be any standard report because the G/L accounts to which you post or manage accruals might differ for each valuation area i.e. for different accounting principles.  
    Regards,
    Ravi
    Edited by: Ravishankar Ramamurthy on Jan 19, 2011 11:38 AM

  • Lync 2013 client is deployed but user accounts are not migrated from OCS to Lync 2013 Server - how to open Lync meetings automatically in the Lync Web Plug-in

    We have in our enterprise the following scenario:
    1 - Lync 2013 client is installed
    2 - User accounts are not migrated to Lync 2013 Server, users are using Office Communicator as their main tool
    3 - Users receive Lync 2013 meeting requests but when try to access them, Lync 2013 client launches and shows error. Users will need to open the browser and paste the URL to the address bar but this still open
    4 - We cannot use the workaround of adding "?SL=1" to the Lync 2013 meeting URL as the user base is large and manual workaround is not accepted
    5 - Question: is there any automated way, via egistry key or GPO setting, so that users temporarily (until their accounts are migrated to Lync 2013 server) can bypass Lync 2013 client completely and automatically open all Lync 2013 meetings
    on the browser, using Lync Web Plug-in?

    Thanks for the response,
    First, I should have mentioned clearly that users have Office Communicator 2007 client and Lync 2013 client installed in their machines. Their accounts are not migrated yet to Lync 2013 server.
    Second, we are using IE9 and IE10. The issue is that users CAN join Lync 2013 meetings with their browsers but have to paste the URL manually to browser and add "?SL=1" otherwise, if they just click at the "Join Online Meeting" or "Join
    Lync Meeting" URL it launches Lync 2013 client which shows error because is not configured yet, as they are using OCS client and migrating slowly to Lync 2013 server.
    Is there a Group Policy setting or a registry key from Microsoft that can be turned on to these users machines and make will all Lync meeting requests to be opened in IE browser instead of Lync 2013 client. We need a way to ignore
    Lync 2013 client until user accounts are migrated to Lync 2013 Server. Manually typing URLs is not an option in a big organization, can't explain thousands of users of different levels what to do.
    We are regretting the decision not to separate Lync 2013 from Office 2013 package we deployed recently. If Lync 2013 is uninstalled then all Lync meeting requests are opened in browser without an issue.

  • Charge Account Is Not Copied From PR to PO When Created From PR to RFQ to Quotation to PO

    Hi,
    We are using Autocreate functionality (Forms) for creating PO.
    Now when we create PO directly from PR, distribution account gets copied correctly from PR, but when when we create PR>>RFQ>>Quotation>>PO , it takes from Inventory org material account.
    I want to use the same account from PR to be copied into PO.
    Please Advise,
    Thanks Nikhil

    You may find the following links to be helpful
    Incorrect PO Accrual Account when PO is created from a Purchase Requisition (Doc ID 1136853.1)
    How to Set Up and Use Category-based Account Default in Purchasing (Doc ID 293046.1)
    How To Diagnose Issues In Autocreate (CREATEPO) Workflow (Doc ID 559009.1)

  • Reports not posting from one server

    We're on PT 8.48.10, HRMS 8.8. We have two web servers which are load balanced with a Cisco load balancer (don't have specifics on the load balancer model, but I can request it if need be. I know sticky sessions and source address NATing are enabled). We have two app servers and one process scheduler, all on AIX 5.3. ServerA has a web server, app server and process scheduler on it. ServerB has a web server and app server. The report repository is set up to use ServerA's web server. The report repository is on an NFS mount shared between the two servers. Both servers have read/write permissions to the share.
    We recently went to SSL terminating at the load balancer. We are using HTTP distribution, making the URL the VIP address (https://vip.intranet:8380/psreports/hrms), the URI is using http with the URI Host set to ServerA.intranet and URI port 8380 (the SSL port to the load balancer and the actual web server port are the same). The URI resource is SchedulerTransfer/hrms.
    The issue we're experiencing is that if the load balancer puts the user on ServerA, then there is no issue with reports posting. If they get put on ServerB, the reports go to Not Posted status. The message logs shows the following:
    +2:02:37PM PSUNX failed to post files to the report repository. Server scheduled to try again on 2012-02-06-12.02.51.000919. See log+
    +10 2:02:52PM Report Repository URL is: http ://ServerA.intranet:8380/Scheduler Transfer/hrms (63,68)+
    +10 2:02:52PM Error getting report repositor y location. (63,85)+
    +10 2:02:52PM SchedulerTransfer Servlet error.+
    +10 2:02:52PM Successful Http Reply Code: 20 0 - OK (63,57)+
    +2:02:52PM HTTP transfer error.+
    The space in "SchedulerTransfer" is not in the report node setup. The DSTAGNT log didn't give much more detail:
    PSDSTSRV.1167494 (9) [02/06/12 12:02:37 PostReport](3) HTTP transfer error.
    I was thinking that maybe there is something wrong or missing in the /etc/hosts file, but I'm not sure what. Also, I swtiched the report node to be on ServerB, and then ServerA could not post reports. Any ideas or suggestions?

    Hi,
    A few possible things you might want to check:
    1.
    Portal URI in the portal tab of the default local node, is this pointing to the correct webserver url and port
    2. Check firewall rules (ports) between processcheduler and webservers
    3.
    Is psreports on both webservers a valid directory as mentioned in configuration.properties and validate write access on psreports folder
    4.
    URI host and port on Proces Sheduler Report node, is is this pointing to the correct webserver url and port

  • Tax Code not copied from Billing to Accounting

    Hi,
    I have a case wherein the tax code is not being copied over from an intercompany Invoice to Accounting line items.
    The conditon record at Billing Header (MWST) has a tax code of B4. The Tax code at the Accouting Line Items is coming out as Blank. The VAT number however is correctly defined.
    What we did notice is that this would occur when the MWST is determined as 0%. For non-zero data, the tax code gets copied over.
    Does anyone have any idea why its happening this way.
    Thanks n Regards
    Dharmendra Rara

    Hi Dharmendra,
    Please note that the SD-FI interface changed
    from earlier releases. The note 400766 eplxains the checks made.
    So it is possible that now you get error message FF805, when in an
    earlier release you didn't get it, eventhough no customizing change.
    However please note =>
    In the vast majority of cases, error FF805 occurs because of an error
    in your pricing procedure. The previously attached note 112609 explains
    in detail how tax codes are transfered to conditions.
    The note 400766 explains the checks performed by the system on the Tax
    codes:
    1. system checks whether there is a revenue line for each tax line.
    2. in the reverse case, for each revenue line containing a certain
       tax indicator there must be a tax line with this indicator.
    If the tax condition has condition value zero and condition base
    value zero, then it is not transferred to FI.
    If you have revenue lines containing a tax indicator XX, but no
    tax line with tax indicator XX, then the error FF805 issues, and
    it is justified. => Please check these informations.
    I hope this is helpful.
    Regards,
    Alex

  • I followed Uverse's instructions and they canceled my account. Not Paying My Bill!

    I sold my house in late Feb '15.  I talked to the Transfer people and siad we were buying a new house and to confirm Uverse service was available, and it was.  i told them we are doing extensive renovations to the house and it could be a number of months before we could move in.  That was fine and they told me to pack my equipment and when we mo0ved in to call and they would hook us back up.  I had monthly, and sometime bi-weekly, calls from them checking on our progress.  They even sent a person out to look at the house to see if it was wired properly.  Then shortly after that, I found out ATT had terminated my account and demanded that I return their equipment.  It seems teh people that bought our house requested Uverse service, no doubt due to my recommendation, and they terminated mine, even thjough it was suspended while my new house was under contruction.  The woman I spoke with was rude, and wouldn't let me speak to a supervisor or someone that had any authority.  It sounds like some kind of screwed up ATT system that they can't suspend an account to a new address and still had my old address on the account, even though they knew all along I didn't live there.  They bill my phone top the new address.  I had changed my online address to the new one, but that didn't matter.  What's more rediculous is that ATT told me to store my equipment.  It's locked up in a warehouse in a couple of 20' pods.  I couldn't get it f I wanted to and I don't.  I follwed every step the ATT people told me to.  I told them everything I was doing and how long iot would take.  And out of the clear Blue the terminate my account and charge me like $700 for the equipment.  I'll be glad to return the equipment when i unpack those pods, and I'll be glad to get Comcast TV and Internet.  I'm sorry I bought an ATT cell phone, but those are easy to change.  This is so screwed up that it's almost sureal.  I do what they ask to the letter, and then they blindside me with this.  Valued Customer . . . Yea!  No they treat you like a criminal.  That's AT&T for you.  And, I will not pay that $700.  I'll go to court over it, if nothing more than the principal of the thing.  This is wrong on so many fronts I can't begin to understand it.  I wonder if others have had this same experience?  And, I recommended AT&T to my home buyer.  That makes me look stupid.  And, maybe I was to get involved with AT&T in the first place.  

    pedrochin wrote:
    You couldn't move in to the new house due to months long renovations, and your old house was sold? So where did you live in the meantime? You couldn't transfer your Uverse service and phone bill to where you were living? What's the upside on suspending your Uverse account for months? You should have cancelled service at the old house and started a new account at the new house with new equipment and new promos.
    The only "hold" that I know of is a vacation hold (minimum 2 months/maximum 9 months) with a $5 fee per month per service to maintain this hold.
     Voluntary suspension information

  • Now have iphone6 and signed for different type lower cost account. Not seen on billing service. to have started Oct 1,2014

    **after receiving iphone6 and signing 2 year contract, negotiated for a change in plan with lower cost and discount... not seen on october bill as promised..totally unable to obtain help on phone to verizon. thanks

    Thanks for the response. I had the 65 advantage plan for 2 years. Service rep at Verizon store assisted me when I activated my new iPhone 6. She noted that over the 2 years i had used only a few minutes of talk, one to 2 texts per month ( at a fee of $. 20 each ) and a minuscule amount of data... and that the phone was for emergency contact to me from my disabled invalid wife only. She searched and found a discount special plan for a savings of  $15.00 per month with a final monthly fee before taxes of $45 and not $59 per month to start on Oct 1st. It does not have a name to the plan just that it carries this special discount. That is all I can tell you. Thanks for the assistance. Await your reply. Thanks
    Bob Bonus
    [email protected] <mailto:[email protected]>  this is Incorrect email........... should be  [email protected]    Wednesday oct 8th, 2014... do not know if you received this response to your email a few days ago. Sorry for the mistake. Await your response. thanks
    bob bonus

  • Account assignment not copied from header to item level.

    Dear All
    I have entered WBS in sales order header level account assignment field. In development and in quality server it is getting copied to header to item level. But in production server it is not getting copied.
    What could be the reason. KIndly guide me.
    Shobana

    Please confirm your data transfer routine (copy control) in your production system. If its working fine in quality system then it should work in production as well.
    Regds
    Jess

  • IPhone and iPod on one account (issue not answered from archive search)

    I have searched previous forum posts for this topic, but I haven't found an appropriate answer to my specific query.
    A few weeks ago I bought an iPod nano 8G Gen5 and today I have picked up a 16G 3G iPhone (new). I am new to these products and have heard itunes doing weird things with erasing files etc.
    Before I do too much syncing and regret what I do and cause no end of hassles, I just want to get this clarified.
    So.... the music I have copied to the computer is synced and stored on my ipod. Can I sync that same music to the iPhone without it affecting the iPod?
    Basically, can you sync the same content on itunes to both an ipod and an iphone connected on the same account? (obviously iphone applications can't be synced on iPod, but music and photos can be played and viewed on both of course)
    I hope I've explained my issue well enough?
    Thanks

    Yes. I have multiple iPods on multiple computers all synced to the same account. Enjoy.

Maybe you are looking for