Accounting postings with ledger group - How to remove it?

Hi Guys...
The postings of the transactions TBB4 and TBB1 are recording the ledgers group (BKPF-LDGRP) = "0L" in the accounting postings. The client is requesting that this information is not recorded.
How do I remove it?
Thanks a lot.
Best regards.

Hi Rodrigo,
Please use the IMG path below to create a ledger group that contains just the ledger you want to accounting.
Financial Accounting (new)
Financial Accounting Global Settings
Ledgers
Ledger
Define Ledger Group
You must create and assign accounting principles to the ledger groups you created.
Financial Accounting (new)
Financial Accounting Global Settings
Ledgers
Ledger
Parallel Accounting
After all, you must assign your valuation area to the accounting principle
FSCM
TRM
TM
Accounting
Organization
Assign Accounting Codes and Valuation Area
Regards,
Itajaci Júnior

Similar Messages

Accounting Document Post with Ledger Group

Hi,
I am trying you post accounting document using 'BAPI_ACC_DOCUMENT_POST', But my requirement is to post the acc documents with 'Ledger Group', I couldn't find any parameter in the above mentioned BAPI. If anyone come accross same requirement please share your knowledge and suggest me how to proceed with this.
Before posting this thread I searched for the threads with same category, but i couldn't find sufficient information.
Regards,
Narayan

Hi Navitha,
I am doing migration as It's a one time activity, If I implement BADI it will be triggered whenever accounting document posting happens, Is there any other way to pass Ledger group like other BAPI / FM etc ?
Regards,
Narayan
Edited by: narayanasamy rajagopal on Sep 30, 2009 11:08 AM

BAPI to park G/L Account document with ledger

Hi Experts,
I have been looking for BAPI to park G/L account document with ledger (FV50L).
Can you please let me know, if you have know about it.
I have found the one for posting BAPI_ACC_DOCUMENT_POST, but It should not be used in our case.
It is park G/L account document without ledger.
Thank you in advance.
Kyongkeum Im.
Edited by: Kyoung Keun Im on Aug 13, 2010 1:11 PM
Edited by: Kyoung Keun Im on Aug 13, 2010 1:12 PM

Hi,
There is not function module for that. I am using BDC to park GL document. For BDC parking you can use Function module -
POSTING_INTERFACE_START and POSTING_INTERFACE_DOCUMENT.
Sample Logic:
Loop at header.
populate header.
loop at item.
populate item.
endloop.
call function POSTING_INTERFACE_START
call function POSTING_INTERFACE_DOCUMENT
call function POSTING_INTERFACE_END
BAPI COMMIT.
Endloop.

What is the best way to reconcile gl account postings with pay results ?

Hi experts
what is the best way to reconcile gl account postings with pay results ?
is it running wage type reporter ?
or is there any otehr way .. i have variances in wtr n gl posting for a few employees.
Regards

Hi,
Match Payroll Journal (PC00_M40_LJN - Payroll Journal ) with Wage type Report.(PC00_M99_CWTR - Wage Type Reporter )
Finally verify the Posting amount (PCP0) with Payroll Journal....(PC00_M40_LJN - Payroll Journal )
This should solve your issue...
Regards,
Veeram

FB50L - Enter G/L account document for ledger Group

Dear all,
Can anyone explain what is the use FB50L - Enter G/L account document for ledger Group?
Will award good points.
Thanks & Regards,
AR

if the company having parallel ledgers, posting of entries in one particular ledger using FB50L and FB0 , in parallel ledger concept if u post any entry all ledgers will be updated. this facility available in ECC 5.00 and 6.00 versions.
if u want further information relating to parallel accounting refer the link
http://help.sap.com/saphelp_erp2005vp/helpdata/EN/2d/830e405c538f5ce10000000a155106/frameset.htm
please assign the points if its useful

FB01N-posting reconciliation account to specific ledger group

Dear all,
I wwould like to adjust certain customer/vendor account via FB01N with specific ledger group, however, I got an error message 'FAGL_POST_SERVICE 034, Postings to ledger ZL not permitted with account type D'.
would anyone know how to solve this problem? thanks.
Rgds,
Ben

Hi Ben,
Current design is that the account type S and non-open item managed accounts are allowed for FB50L. FB50L is designed to make 'adjustment' postings depending on the requirement for period-end closing operations. Open item managed accounts (including vendor, customer..) will be processed for clearing but clearing must be done for the leading ledger and also it doesn't give an option to make clearing only for the non-leading ledger.
Kind regards, Kyoko

GL account linkage with activity group for AVC- Funds management

Hi,
I have activated (BCS) funds management in my system. My client wants that system will give error message for some expense GL accounts and for other expense GL accounts it will only give information message.
For that i have created new activity group for AVC but i have no idea how we can link GL accounts with activity group for AVC.
Request immediate help.
Thanks in advance.
Manisha

Hi,
The correct way to deal with this is not with activity groups, but with tolerance profiles. Create tolerance profiles with error and warning messages accordingly and then create a tolerance derivation strategy, which on the basis of commitment item, will derive the relevant profile.
Regards,
Eli

Account determination with valuation grouping code

We currently have 25 plants (valuation areas) setup using one chart of accounts and a common valuation grouping code for account determination. We now have a need to change one of the plants to use different accounts than the other 24 for the GBB transaction. I can see that transaction OMWD allows me to enter a different valuation group code by plant; so I've entered a different code for the plant we want to change. I then go into OBYC, double-click on GBB and I can see all the accounts set up. From here, if I press the 'rules' button I can see the options to base account determination on. Currently, the 'valuation modification' checkbox is unchecked - I believe this has to be checked in order to use the valuation grouping code.
I'm a little unclear on how to setup the different accounts for the valuation grouping code I've assigned to my one plant. When I checked the 'valuation modification' checkbox and save, I get a message 'the current account determination will be deleted if the rules are changed'. I've done this in a sandbox environment and it certainly does delete all the accounts setup for GBB! But it does then give me the option to enter the valuation grouping code, which is what I need to enter different accounts.
Am I doing this correctly and in the right sequence? Is there a way to save the current values in GBB so they don't go away when I choose 'valuation modification'?

Hi Leslie,
Based on your problem statement, if all the 25 plants are associated to a valuation grouping code, ideally your GBB key should have had the valuation modifier checked in the rules.
If it were not checked, then your current account determination for GBB key will get deleted when you add or delete a rule. Reason being the characteristics for account determination have now changes. Example, if you account determination is based on Valuation class as well, then earlier GBB had Valuation Classs/ Account but with the new rule it will have Valuation Mod./Valuation Class/ Account. SAP can't automatically map your previous account determination to the new account determination.
Best way to move forward is to take a screenshot or save your account determination from Table T030. Make changes to the rule. Then redo the account determination by refrecing the account determination that you saved before.
Regards

Accounting Principles and Ledger Groups

Dear All,
I have just discovered that for a previous project in my current Client that 3 of the ledger groups were never assigned an Accounting Principle.
Based on this SAP will post to these sub-ledgers based on the Accounting Principe assigned to the 0L Leading Ledger. Since all post via "GAAP" based principles will there be any impact on now creating new Accounting Principles for these ledgers/ledger groups?
The missing details relate to India GAAP and China GAAP. Assets posting seems to be OK based on the existing postings, but only the foreign currency valuation is missing as it was never done between the valuation area and the accounting principle were never assigned!!
Any opinions?
Regards
Waza

But by assigning the ledger group previously created to the new accounting principle will this then have any issues in our postings?
Obviously we will do the testing, especially for assets, etc.
Regards
Waza

Error when Parking G/L Account Document for Ledger Group

Dear Frds,
When my client try to park document for General ledger group (T-Code: FV50L), he is getting the error like CHECK_PLANTS_ABRO with the message No # FF804.
Can anybody guide me what is this regard..
Regards,
Laxma

Do one this items:
1. Refer Note. 904036
2. Check your configuration in terms of plants, company code, company name. Something might have been missing.

A date column, with timestamp..how to remove timestamp

Hi,
I have a table name CATCH, with one of its fieldnamed DATE, using DATE datatype.
The date format incudes timestamp,can anyone help me how to remove the timestamp part.
I only want the date part only. I have tried this:
Update CATCH set DATE=to_char(date,'DD-MON-YYYY');
but the result of all the date inside the table still having timestamp.
then i use this:
Update CATCH set DATE=to_date(date,'DD-MON-YYYY');
and the result still the same.
Can anyone advice on this? pls.
Thanks

user9353110 wrote:
Thank you very much..if thats the case, can we remove the timestamp when creating view for this table?no, you can never remove the time component of a DATE.
If you don't want to show the time for a date (display purposes only!), use TO_CHAR to "transform" the DATE to a string with the appropriate format mask
SQL> alter session set nls_date_format = 'dd-mm-yyyy hh24:mi'
2 /
Session altered.
SQL> select sysdate
2    from dual
3 /
SYSDATE
17-03-2010 09:28
SQL> select to_char (sysdate, 'dd-Mon-yyyy')
2    from dual
3 /
TO_CHAR(SYSDATE,'
17-Mar-2010
SQL> select to_char (sysdate, 'yyyy-MON-dd')
2    from dual
3 /
TO_CHAR(SYSDATE,'
2010-MAR-17
SQL> NOTE: the last two example are not DATEs! They are STRING

CM01 with PP-PI, how to remove phases

We are using PP-PI module and in our master recipe we have 2 phases (Scheduling with capacity) for 1 operation. When we execute capacity evaluation CM01, it should displayed only the operation (sum of the phases) but instead it displays both phases.
I looked at the configuration without success. Can someone help us?
Also, we looked at transaction CM56. That one works fine but I don't know how to create a new profile or change it online. Can someone help?
Thanks,
Ghislain

Thanks Praveen, it works but unfortunately it doesn't remove the overprint on the actual group. I'll attach a screen shot to show you.
So, all of these paths and paths in the groups above have the overprint removed perfectly using the script you gave. However, it fails to find and remove the overprint that has snuck in on the group that I have underlined in red. All of the paths within that group are overprint-free.
I know we shouldn't have those useless groups to begin with and our new files don't; but when working with old files that we have we make do and go for speed rather than quality.
But hey I'm a designer and not production and if we have to ungroup them all then so be it! Production can just deal with it.

No Toolbar Group - How to remove buttons

Hi Everyone
I am working in CRM 4.0
In sales order application, detail area 2 from prices tab i have to remove buttons of "Add Entry", "Delete Entry", "Update Prices".
However BLueprint application builder and CRMC_PCUITOOLS transaction does not give any toolbar group for this tab
Could anyone suggest what the problem in this case might be and how do i go about solving it
TIA
Asad

Thanks
The issue is resolved
It seemed that there were two screen areas.
While one did not had toolbar group, the other one had.
Thanks
Asad

2 iPhones, 2 Apple IDs, 2 iTune accounts. With all this how do we sit up two iClould accounts? Web site won't let me download a 2nd version of iCloud to create a second account.

With 2 iPhones, 2 Apple IDs and 2 iTune accounts, how do we get separate iCloud accounts? I have mine set up and working fine. When I go in to download another version of iCloud, it acts like I need a repair and will not allow me to download a second version. Can this be done? Will all our photos now go into one Photo Stream folder?
Thanks. Susan

We have two windows accounts and it worked fine that way, when you log into the other account and go to the iCloud control panel, log in with the second apple ID there. Then you have two separate photo stream folders.

Create account document with AC_DOCUMENT_CREATE. How?

Hello,
I am trying to create an accountdocument with FM AC_DOCUMENT_CREATE and get as far as creating it and it shows up in the account document list (FB03). But there is a problem:
The value only shows up in field DMBTR (amount in own currency) instead of WRBTR (amount in document currency).
Entering the entries in fields ACCIT-KRBTR, ACCCR-WRBTR, ACCCR-WMWST or ACCCR-PYAMT either creates no document or a document as described above.
Does anybody have any idea in what field(s) I need to enter the amount that I want to be booked?
Best regard,
Tim van Steenbergen

Resolved to doing transfer to billing action into status tab

Accounting postings with ledger group - How to remove it?

Similar Messages

Maybe you are looking for