ACE working with IronPort WSA server farm

We have an ACE load balancing a group of Ironport WSA. The WSA are working with the feature IP Spoofing, then the request to WWW has the source ip address of the WSA client and not the WSA itself.
We follow the documento behind, but it is not working. When the packet coming from Internet having the destination address the WSA client address, the ACE can not delivery the packet even with the mac-sticky configured.
I read in other forum that ACE needs to have in its arp table or route table the destination IP address for being able to deal with the packet by the encapid.
But we don't have this entry in the arp table.
When we configure the WSA with IP spoofing and the source ip address is the WSA itself the configuration works fine.
Some have this kind of problem in some ocasion?
Thank you,
Everaldo

Hi Jorge,
The behavior is when we have IP Spoofing configured in the WSAs, the connection is not established. The ACE establishes the connection with the client but the connection with Internet is not established. I captured the packets that arrive in the ACE coming from Internet and I see SYN packets with source address as a public IP (Google) and the destination address as the internal client IP address with no ACK just RST.
With no IP Spoofing, meaning that the ip source address is tha WSA the connection is established with no RST.
Follow the output the commands:
show service-policy WSA-VIPS class-map WSA_VIP_TCP_3128 detail
Status     : ACTIVE
Description: -----------------------------------------
Interface: vlan 304
  service-policy: WSA-VIPS
    class: WSA_VIP_TCP_3128
     VIP Address:                              Protocol:  Port:
     10.10.193.25                              tcp    eq   3128
      loadbalance:
        L7 loadbalance policy: WSA-POLICY
        VIP Route Metric     : 77
        VIP Route Advertise  : ENABLED-WHEN-ACTIVE
        VIP ICMP Reply       : ENABLED-WHEN-ACTIVE
        VIP State: INSERVICE
        VIP DWS state: DWS_DISABLED
        Persistence Rebalance: DISABLED
        curr conns       : 3         , hit count        : 1260
        dropped conns    : 4
        conns per second    : 0
        client pkt count : 19271     , client byte count: 2326106
        server pkt count : 26140     , server byte count: 16572023
        conn-rate-limit      : 0         , drop-count : 0
        bandwidth-rate-limit : 0         , drop-count : 0
        L7 Loadbalance policy : WSA-POLICY
          class/match : class-default
            LB action :
               primary serverfarm: WSA_FARM
                    state: UP
                backup serverfarm : -
            hit count        : 1260
            dropped conns    : 0
            compression      : off
      compression:
        bytes_in  : 0                          bytes_out : 0
        Compression ratio : 0.00%
                Gzip: 0               Deflate: 0
      compression errors:
        User-Agent  : 0               Accept-Encoding    : 0
        Content size: 0               Content type       : 0
        Not HTTP 1.1: 0               HTTP response error: 0
        Others      : 0
switch/WSA# show probe WSA_TCP_3128
probe       : WSA_TCP_3128
type        : TCP
state       : ACTIVE
   port      : 3128         address   : 0.0.0.0
   addr type : -            interval  : 5       pass intvl  : 10
   pass count: 3            fail count: 30      recv timeout: 10
                ------------------ probe results ------------------
   associations     ip-address         port porttype probes failed passed health
   ------------ ----------------------+----+--------+------+------+------+------
   serverfarm  : WSA_FARM
     real      : WSA-01[0]
     real      : WSA-02[0]
                          10.10.193.37 3128 PROBE   15076  72     15004  SUCCESS
     real      : WSA-03[0]
     real      : WSA-04[0]
     real      : WSA-05[0]
     real      : WSA-06[0]
     real      : WSA-07[0]
     real      : WSA-08[0]
     real      : WSA-09[0]
     real      : WSA-10[0]
switch/WSA# show probe WSA_TCP_3128 detail
probe       : WSA_TCP_3128
type        : TCP
state       : ACTIVE
description :
   port      : 3128         address   : 0.0.0.0
   addr type : -            interval  : 5       pass intvl  : 10
   pass count: 3            fail count: 30      recv timeout: 10
   conn termination : FORCED
   expect offset    : 0         , open timeout     : 3
   expect regex     : -
   send data        : -
                ------------------ probe results ------------------
   associations     ip-address         port porttype probes failed passed health
   ------------ ----------------------+----+--------+------+------+------+------
   serverfarm  : WSA_FARM
     real      : WSA-01[0]
     real      : WSA-02[0]
                          10.10.193.37 3128 PROBE   15088  72     15016  SUCCESS
   Socket state        : CLOSED
   No. Passed states   : 2         No. Failed states : 1
   No. Probes skipped  : 0         Last status code  : 0
   No. Out of Sockets  : 0         No. Internal error: 0
   Last disconnect err :  -
   Last probe time     : Mon Sep  3 21:06:47 2012
   Last fail time      : Mon Sep  3 20:45:05 2012
   Last active time    : Mon Sep  3 20:45:57 2012
     real      : WSA-03[0]
     real      : WSA-04[0]
     real      : WSA-05[0]
     real      : WSA-06[0]
     real      : WSA-07[0]
     real      : WSA-08[0]
     real      : WSA-09[0]
     real      : WSA-10[0]
Thank you,
Everaldo

Similar Messages

  • Replacing MS ISA proxy with IronPort WSA proxy - ISA firewall client?

    Replacing MS ISA proxy with IronPort WSA proxy - what about the ISA firewall client?
    Does Cisco have an equivalent of the Microsoft ISA Firewall Client?
    How does WSA handle complex protocols (such as ftp) through the proxy server?

    We are replacing MS ISA proxy servers with IronPort WSA S370 proxy servers.
    We have several apps that make use the MS firewall client.
    The MS firewall client enables HTTP-tunneling of TCP & UDP through the ISA proxy servers instead of going through firewalls.
    These apps use various ports - and there are rules setup on the ISAs specifially for these apps and their ports.
    Also we have serveral uses of RPD, telnet, and SSH using the firewall client to HTTP-tunnel through the proxy servers -- and these have  specific ISA rules setup for them too.
    I can find HTTP-tunneling software - commercial and freeware - but can't find any that I think will work through the IronPort WSA S370 proxy servers.
    Would like to find someone who has implemented HTTP-tunneling using IronPort WSA 370 proxy servers.
    Thanks again for your input.

  • How can iWeb hit counter be made to work with non-Apple server?

    How can IWeb hit counter be made to work with non-Apple server?

    This tutorial describes how to add an alternative counter to an iWeb page: iW05 - Adding a Graphical StatCounter as an HTML Snippet to an iWeb Page
    OT

  • Does Mail (3.6) work with MS Exchange Server 2003?

    I'm struggling to get Mail to work with an exchange server.
    Apparently, from the company's FAQs, we can hook up an iPhone, but alas not Mail.
    With the iPhone directions, they talk about a "domain" field, which doesn't show up in Mail.
    Any tips or clues would be appreciated.

    I'm not entirely sure why this works now, but it does. Yay!
    My problem evolved such that I, when I sent out through a different outgoing server, a recipient would see the address of the outgoing address, e.g. if I was using the gmail servers it would look like [email protected], and not the [email protected]
    So as a work around I tested sending out messages with my [email protected] address in the Reply To field. That works.
    Strangely, a Sent mailbox with for my [email protected] has appeared. Even messages that I've sent out with nothing in the Reply To field indicate that they've come from my [email protected] address.
    Keys to making it work:
    • Set up the exchange address as an IMAP account (not an exchange account)
    • Use the above referenced source forge tool
    • Partner with the company's IT people for whatever assistance they can offer
    • Use a Reply To field with the exchange, if required

  • Does PI need a direct connection to third party or can work with a proxy server based connection to third party?

    does PI need a direct connection to third party or can work with a proxy server based connection to third party?

    Hi,
    It basically includes 3 systems, one is our ECC sender system, middle one is PI box and third one is the receiver system. Data is successfully reaching to PI system from our sender system.Now we want to forward this to our third party system from PI box.
                                                                    I want to know that such sending of data requires direct connection to third party or it can be done by proxy server based connection to third party.If it is possible then what are the steps to do this?
    Regards-
    Anuj Nogja

  • How to get JDev 10.1.2/ADF working with MS SQL Server Identity Column

    Hello JDevTeam & JDevelopers,
    I want to use JDev/ADF with a MS SQL Server 2005 database that contains tables employing IDENTITY Columns.
    Using JDev/ADF and DBSequence with an Oracle database employing before triggers/sequences accomplishes what I am trying to do except I want to accomplish the same thing using a MSSQL Server 2005 database. Unfortunately I cannot change the database.
    I have been able to select records but I am unable to insert records (due to my lack of knowledge) when using MS/SQL Server Identity Columns with JDev/ADF.
    The following are the steps taken thus far.
    Step1: Create table named test in the 2005 MSSQL Server (see script below).
    Step2: Register 3rd Party JDBC Driver with JDeveloper; Using use Tools/Manage Libraries. Create a new entry in User Libraries with the following;
         Library Name     = Ms2005Jdbc
         Class Path     = C:\dev\Ms2005Jdbc\sqljdbc_1.0\enu\sqljdbc.jar
         (note: Latest TYPE 4 JDBC driver for Microsoft SQL Server 2005 - free at http://msdn.microsoft.com/data/ref/jdbc/)
    Step3:Create New Database Connection;
         Connection Name = testconn1
         Type = Third Party JDBC Driver
         Authentication Username = sa, Password = password, Check Deploy Password
         Connection
              Driver Class = com.microsoft.sqlserver.jdbc.SQLServerDriver     
              Library = Ms2005Jdbc     
              Classpath = C:\dev\Ms2005Jdbc\sqljdbc_1.0\enu
              URL = jdbc:sqlserver://192.168.1.151:1433;instanceName=sqlexpress;databaseName=test
         Test Connection = Success!
    Step5: Create a new application workspace using Web Application default template
    Step6: In Model project, Create new Business Components Diagram.
    Step7: Create new Entity Object. Goto to connections/testconn1, open tables and drag table test onto the diagram.
    Step8: Generate Default Data Model Components by right-clicking on Entity Object. Except all the defaults.
    When I test the Appmodule I select the view object and can scroll through all the records without error. If I try to insert a record, I get JBO-27014: Attribute testid in test is required.
    Going back to the EntityObject I deselect the Mandatory attribute and re-run the test. Now when I try to insert it accepts the value for testname but it does not update the PK testid like it would using an "JDev/ADF/DBSequence/Oracle database/before trigger/sequence" solution.
    Going back to the EntityObject and selecting refresh on insert does not solve this problem either. Changing the URL connection string and adding "SelectMethod=cursor" did not help and changing the SQl Flavor to SQLServer produced errors in the Business Components Browser. I've tried overriding isAttributeChanged() and other things as well.
    I am totally stuck! Can anyone provide a solution?
    Thanks for you help,
    BG...
    Create table named test
    use [testdb]
    go
    set ansi_nulls on
    go
    set quoted_identifier on
    go
    create table [test](
         [testid] [int] identity(0,1) not null,
         [testname] [nvarchar](50) collate sql_latin1_general_cp1_ci_as not null,
    constraint [pk_test] primary key nonclustered
         [testid] asc
    )with (pad_index = off, ignore_dup_key = off) on [primary]
    ) on [primary]

    Figured it out!
    When using the MS SQL Server 2000 Database with the MS JDBC 2000 Driver you specify the SQL Flavor to SQLServer. However setting the SQL Flavor to SQLServer with MS SQL Server 2005 Database and the MS JDBC 2005 Driver will *** fail ***.
    When working with the MS SQL Server 2005 Database and the MS JDBC 2005 Driver you set the SQL Flavor to SQL92 and the Type Map to Java.
    If using a named instance like I am you would specify the URL = jdbc:sqlserver://<db host ip address>:<listening port>;instanceName=<your instance name>;selectMethod=cursor;databaseName=<your database name> (note: leave out the < >)
    The 2005 Driver Class is different then the 2000 and is specified as com.microsoft.sqlserver.jdbc.SQLServerDriver
    Note: In a default MS SQL Server 2005 installation the listening port will change *** everytime *** the host is restarted! You can override this though.
    For the primary key you need to deselect the Mandatory attribute in the EntityObject editor.
    Set Refresh on insert/update = no.
    Set Updateable = never.
    Now my Primary Keys which get their values from the Identity Column are working with ADF in a predictable way.
    Simple enough but I have been away from this stuff for awhile.
    BG...

  • Applet does not work with a proxy server.URgent

    Hi,
    I have an asp page being hosted from a IIS server.
    The asp page has an applet which gets data from a server side component which is hosted as a service on the server side.For connection to the server I am using URLConnection object and trying to connect over a TCP connection.
    The problem occurs when I use an proxy in the middle.
    I have changed the browser settings to include the proxy.
    The following is the error I recieve:
    Full :http://172.25.11.63:4590/
    <-------------------------------->
    OPening input stream
    in Run ::::
    ERROR: Created data socket but can't open stream on
    it.172.25.11.63:4590//
    172.25.11.63:4590//
    java.io.FileNotFoundException: 172.25.11.63:4590//
         at com/ms/net/wininet/http/HttpInputStream.connect
         at com/ms/net/wininet/http/HttpInputStream.<init>
         at com/ms/net/wininet/http/HttpURLConnection.createInputStream
         at com/ms/net/wininet/WininetURLConnection.getInputStream
         at TalkClientApplet.rendezvous
         at TalkClientApplet.actionPerformed1
         at TalkClientApplet.start
         at com/ms/applet/AppletPanel.securedCall0
         at com/ms/applet/AppletPanel.securedCall
         at com/ms/applet/AppletPanel.processSentEvent
         at com/ms/applet/AppletPanel.run
         at java/lang/Thread.run
    ...Disconnecting.
    Following is my code.
    url = new URL("http://" + host +":"+i);
    urlconnection = url.openConnection();
    urlconnection.setDoOutput(true);
    urlconnection.setDoInput(true);
    System.out.println("Successfully opened the URL connection at " + "http://" + host + ":" + i );
              System.out.println ("Protocol: " + url.getProtocol());
              System.out.println ("Host :" + url.getHost());     
              System.out.println ("Port :" + url.getPort());
              System.out.println ("File :" + url.getFile() );
              System.out.println ("Full :" + url.toExternalForm());
              System.out.println ("<-------------------------------->");
    os = new BufferedWriter(new OutputStreamWriter(urlconnection.getOutputStream()));
    System.out.println("OPening input stream ");
    // is = new DataInputStream(urlconnection.getInputStream());
         System.out.println(urlconnection.getInputStream());
    is = new DataInputStream(urlconnection.getInputStream());
    The exact place where I get the error is whn i call URLConnection.openInputStream().
    Usually this error comes with a malformed URL.But the same code words without a proxy.Also I am not making any changes to my code in both scenarios that is with or without proxy.
    Please help.This is urgent and a showstopper

    Thanks for your nice solution, but unfortunatelly it does not work with lines longer than 100 chars with Netscape. It works fine with IE and appletviewer too.
    Example:
    I use this code:
    try {
                URL url = new URL(protocol,hostName,portNumber,URLstring);
                InputStream in = url.openStream();
                BufferedInputStream bis = new BufferedInputStream(in);
                StringBuffer input = new StringBuffer(60);
                int c;
                while ((c = bis.read()) != -1){
                    System.out.print((char)c);
                    input.append((char)c);
                bis.close();
                dataFromServer = input.toString();
            catch(Exception ex) {
                ex.printStackTrace();
            }I use input file test.html with exactly 100 chars ('a')
    Netscape Java Console:
    aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaadataFromServer : aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaI use input file test.html with exactly 101 chars ('a')
    Netscape Java Console:
    ?JL?yyxk?cedataFromServer : ?

  • IPhone 2.0 doesn't work with my exchange server

    My tech support guys have been working on my iPhone for an entire day and couldn't get it to work with the server. They are telling me that the phone isn't compatible with the exchange server and it would require an entire overhaul of our server and reconfiguration to get it to work. I thought the new iPhone was supposed to be so easy to use. I am so ready to ditch my blackberry and so very disappointed that I can't get the iPhone to work with our server. Macintosh support was completely useless to help figure out this problem- as they said they don't offer support to third party software- yet this phone is supposed to work with the Microsoft Exchange Server?! Can anyone offer any help?
    Below is the explanation my tech support gave me:
    I wanted to reach out to you to update you with your iPhone working on the peacock exchange. After spending considerable time with both AT&T and Macintosh, getting the phone to operate with exchange as easy as Macintosh advertises, has ended in a failure. Your phone device itself, is properly updated and has all the correct settings. Where the problem lies for you is on the Microsoft server end. This is where the server will have to have additional software and updates installed which would effect and change the peacock network environment. This can be potentially accomplished, however it will need to be evaluated for the additional costs and potential risks to the server and environment. That’s why BlackBerry is so popular with business networks, because it does not affect the Microsoft Exchange mail services in any shape or form. Blackberry runs on its own server service which acts as the bridge to communicate with the Microsoft service.
    AT&T was very helpful and tried everything they could to aid us. Macintosh on the other hand, was not very helpful. After a few unsuccessful attempts, Macintosh just came out and said that they do not support 3rd party software (i.e Microsoft Products). You can give Macintosh a try, and see if you end with better results.

    wcadesign wrote:
    Below is the explanation my tech support gave me:
    I wanted to reach out to you to update you with your iPhone working on the peacock exchange. After spending considerable time with both AT&T and Macintosh, getting the phone to operate with exchange as easy as Macintosh advertises, has ended in a failure. Your phone device itself, is properly updated and has all the correct settings. Where the problem lies for you is on the Microsoft server end. This is where the server will have to have additional software and updates installed which would effect and change the peacock network environment. This can be potentially accomplished, however it will need to be evaluated for the additional costs and potential risks to the server and environment. That’s why BlackBerry is so popular with business networks, because it does not affect the Microsoft Exchange mail services in any shape or form. Blackberry runs on its own server service which acts as the bridge to communicate with the Microsoft service.
    Actually Blackberry has two options, one where they pull from your server and then push it to your phone as described. Alternatively you can install their software on your server to relay. Both require additional services, software and fees. Instead the iPhone uses the ActiveSync included in the Exchange server, which is the same protocol used to communicate with Windows Mobile based devices.
    AT&T was very helpful and tried everything they could to aid us. Macintosh on the other hand, was not very helpful. After a few unsuccessful attempts, Macintosh just came out and said that they do not support 3rd party software (i.e Microsoft Products). You can give Macintosh a try, and see if you end with better results.
    Essentially Apple does not configure Microsoft Exchange for your admins. We do provide a list of what versions of ActiveSync and which ActiveSync features we support. However, ActiveSync is part of the Microsoft Exchange server maintained and configured by your Exchange server admins.
    Hope this helps,
    Nathan C.

  • Macbook Pro won't work with HP print server n2101?

    Hi all, happy New Year.  I have a new Macbook Pro and I am trying to hook it up to my HP print server n2101 and my HP psc 2210 all-in-one printer.  The mac recognises the server (and vice versa), the mac prints when connected directly to the printer but the server refuses to connect with the mac (keeps showing 'idle')  Anyone have any ideas how to fix it?  Very disappointed as all things mac usually work with no probs!

    Hi, I used the Mac setup instructions, not the PC ones.  The printer was automatically recognised in print and scan when I connected it with a USB cable.  I accessed the server's web-based page and followed all the instructions, but still no joy.  Thanks for the tip about posting.  I have just posted in the section you suggested, so let's see what happens.  From a quick scan around the apple forums, lost of other people seem to having precisely the same problem (and not just with HP printers!), but unfortunately, no-one seems to be offering a solution!  And trying to get through to the apple online support is a complete waste of time.  They've been 'not available' for two days now.  Christmas/New Year shutdown, I suppose.  Thanks for all your help, though!

  • Does CR 2008 work with Crystal Reports Server 11.5

    I currently have CRS 11.5 and am using CRXI. I would like to upgrade CRXI to CR2008 (visual advantage), but not upgrade CRS at this time. Does CR2008 work with CRS11.5? Any known issues to be aware of?
    Thanks,
    Jsr

    Unfortunately, CR 2008 is compatible with CR Server 2008 only You could refer to the [CR Server 2008 Supported Platforms|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/90e0d1a4-ae34-2b10-198c-f309bfa21e91]
    Kindly refer to the [Crystal Reports Server XI Release 2 Info|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/20d9fe63-396c-2b10-e7a8-efddd1a910f6]
    Hope it helps !!

  • "Message Driven Bean" doesn't work with Sun App Server

    Hello all,
    i have a little bit problems, running a simple "Message Driven Bean" under the Sun App Server. The deployment of it works fine, but after starting the SUN App Server i get the following error message:
    An error occurred during the message-driven beancontainer initialization at runtime. The most common cause for this is that the physical resource(e.g. Queue) from which the message-driven bean is consuming either does not exist or has been configured incorrectly. Another common error is that the message-driven bean implementation class does not correctly implement the required javax.ejb.MessageBean or MessageListener interfaces.
    Has anybody a workaround for this problem?
    The queue seems to be correctly installed. A simple client programm from the Sun Tutorial (Consumer & Producer) works fine without any Errors or Exceptions.
    I am a little bit confused, because the queue seems to work with the client programms but not with a MDB running on the SUN App Server.
    Thanks for you help!
    Greetings
    Manuel

    Hello Mr Manuel!
    could you plz help me with the steps for creating a message driven bean using netbeans ver 5.0(with Sun Java� System Application Server Platform Edition 8.2 )
    I just know how to work with Session beans & Entity Bean, and am try to learn to work on Message Driven Beans too. there are no proper tutorials where i can find steps for creating these..
    I need the steps from the scratch.,like creating QueueConnection Factory & Destination etc..
    It will be gr8 if you can help me with this at the earliest .
    Thank you
    Bye

  • Problem : App works with Sun App server 8.0 but fails with 8.1

    Hi All
         I am experiencing some strange problem with executing my JSF application with Sun App Server.
         I have an EAR deployed on Sun Application Server 8.0 and 8.1.
         Strangely it works quite fine with 8.0 but fails with 8.1.
         In my JSP page ..I have a dummy component whose getter method is used as a "FormLoad" event of the page.
         <h:form id="imageForm" enctype="multipart/form-data">
         <h:messages showDetail="true" />
         <table width="980" border="1" cellpadding="0" cellspacing="0" bordercolor="#A9B8C2">
              <tr>
    <td>     
                   <h:inputHidden value="#{Screen1.initializeService}"/>
              <h:selectOneListbox styleClass="style2" id="cmbMiddleArea" immediate="true" value="#{Screen1.selectedMiddleArea}">
              <f:selectItems value="#{Screen1.middleAreaList}" />
         </h:selectOneListbox>
         In my backing bean i have ..
         public String getInitializeService() {
              ..... Retrieve all the data from DB to initialize all the components on the JSP page
              .......setMiddleAreaList......
              .......setSelectedMiddleArea.....
              ........set the values of the individal component...
         I am retrieving all the data from DB in this getter method and intializing the components on the JSP page.
         I have also checked the code generated for JSP by both the servers.I am posting the code here for reference although
         i did not find any significant difference between the two...
         For Server 8.0
         private boolean jspxmeth_h_inputHidden_0(javax.servlet.jsp.tagext.JspTag jspxth_h_form_0, PageContext jspxpage_context)
         throws Throwable {
         JspWriter out = jspxpage_context.getOut();
         // h:inputHidden
         com.sun.faces.taglib.html_basic.InputHiddenTag jspxth_h_inputHidden_0 = (com.sun.faces.taglib.html_basic.InputHiddenTag) jspxtagPool_h_inputHidden_value.get(com.sun.faces.taglib.html_basic.InputHiddenTag.class);
         jspxth_h_inputHidden_0.setPageContext(_jspx_page_context);
         jspxth_h_inputHidden_0.setParent((javax.servlet.jsp.tagext.Tag) jspxth_h_form_0);
         jspxth_h_inputHidden_0.setValue("#{searchBean.initializeService}");
         int jspxeval_h_inputHidden_0 = jspxth_h_inputHidden_0.doStartTag();
         if (_jspx_th_h_inputHidden_0.doEndTag() == javax.servlet.jsp.tagext.Tag.SKIP_PAGE)
         return true;
         jspxtagPool_h_inputHidden_value.reuse(_jspx_th_h_inputHidden_0);
         return false;
         For Server 8.1
         private boolean jspxmeth_h_inputHidden_0(javax.servlet.jsp.tagext.JspTag jspxth_h_form_0, PageContext jspxpage_context)
         throws Throwable {
         PageContext pageContext = jspxpage_context;
         JspWriter out = jspxpage_context.getOut();
         // h:inputHidden
         com.sun.faces.taglib.html_basic.InputHiddenTag jspxth_h_inputHidden_0 = (com.sun.faces.taglib.html_basic.InputHiddenTag) jspxtagPool_h_inputHidden_value_nobody.get(com.sun.faces.taglib.html_basic.InputHiddenTag.class);
         jspxth_h_inputHidden_0.setPageContext(_jspx_page_context);
         jspxth_h_inputHidden_0.setParent((javax.servlet.jsp.tagext.Tag) jspxth_h_form_0);
         jspxth_h_inputHidden_0.setValue("#{searchBean.initializeService}");
         int jspxeval_h_inputHidden_0 = jspxth_h_inputHidden_0.doStartTag();
         if (_jspx_th_h_inputHidden_0.doEndTag() == javax.servlet.jsp.tagext.Tag.SKIP_PAGE)
         return true;
         jspxtagPool_h_inputHidden_value_nobody.reuse(_jspx_th_h_inputHidden_0);
         return false;
         Now the actual problem is "getInitializeService" method never gets called when i deploy and run the application on Sun App Server8.1
         However with Sun App Server 8.0 it woeks perfectly fine.
         Can anybody help me in resolving these issues ?
         

    Actually generated JSP code can be referred as ...
    For Server 8.0
         private boolean jspxmeth_h_inputHidden_0(javax.servlet.jsp.tagext.JspTag jspxth_h_form_0, PageContext jspxpage_context)
         throws Throwable {
         JspWriter out = jspxpage_context.getOut();
         // h:inputHidden
         com.sun.faces.taglib.html_basic.InputHiddenTag jspxth_h_inputHidden_0 = (com.sun.faces.taglib.html_basic.InputHiddenTag) jspxtagPool_h_inputHidden_value.get(com.sun.faces.taglib.html_basic.InputHiddenTag.class);
         jspxth_h_inputHidden_0.setPageContext(_jspx_page_context);
         jspxth_h_inputHidden_0.setParent((javax.servlet.jsp.tagext.Tag) jspxth_h_form_0);
         jspxth_h_inputHidden_0.setValue("#{Screen1.initializeService}");
         int jspxeval_h_inputHidden_0 = jspxth_h_inputHidden_0.doStartTag();
         if (_jspx_th_h_inputHidden_0.doEndTag() == javax.servlet.jsp.tagext.Tag.SKIP_PAGE)
         return true;
         jspxtagPool_h_inputHidden_value.reuse(_jspx_th_h_inputHidden_0);
         return false;
         For Server 8.1
         private boolean jspxmeth_h_inputHidden_0(javax.servlet.jsp.tagext.JspTag jspxth_h_form_0, PageContext jspxpage_context)
         throws Throwable {
         PageContext pageContext = jspxpage_context;
         JspWriter out = jspxpage_context.getOut();
         // h:inputHidden
         com.sun.faces.taglib.html_basic.InputHiddenTag jspxth_h_inputHidden_0 = (com.sun.faces.taglib.html_basic.InputHiddenTag) jspxtagPool_h_inputHidden_value_nobody.get(com.sun.faces.taglib.html_basic.InputHiddenTag.class);
         jspxth_h_inputHidden_0.setPageContext(_jspx_page_context);
         jspxth_h_inputHidden_0.setParent((javax.servlet.jsp.tagext.Tag) jspxth_h_form_0);
         jspxth_h_inputHidden_0.setValue("#{Screen1.initializeService}");
         int jspxeval_h_inputHidden_0 = jspxth_h_inputHidden_0.doStartTag();
         if (_jspx_th_h_inputHidden_0.doEndTag() == javax.servlet.jsp.tagext.Tag.SKIP_PAGE)
         return true;
         jspxtagPool_h_inputHidden_value_nobody.reuse(_jspx_th_h_inputHidden_0);
         return false;
         }

  • IOS 6 AirPrint not working with 10.6 Server - FIX!!!

    Not sure if there are any bods out there that use 10.6.8 server for AirPrint but if you do - you will have noticed that iOS6 doesn't see shared printers where as iOS5 does. Below is the fix. You need to be reasonably proficient with Terminal but otherwise - straightforward. Hope this helps.....
    (Obviously you can stop the service and use Netputing's AiorPrint Activator but for a server based managed queueing system, this just allows it to works as it did before.)
    10.6.8v1.1 Server and iOS6 AirPrint not working… Fix below…
    Stop Print Services and as root from terminal using vi or equiv add the following:
    (you will need to chmod 744 to edit then 444 the mime file after. 'touch' the files when your done)
    It may work being left rwx but I don't know - I have just put the files back to their original state.
    Restart print services after and you are all good.
    usr/share/cups/mime/
    File: apple.types
    Add the following line in bold (I have shown a few lines either side so you know where to put them):
    image/pict                              pict pic PICT string(522, <001102FF0C00>)
    image/urf                               urf (0,UNIRAST)
    # Image formats supported by CGImageIO.
    image/imageio                   crw cr2 nef bay raw dcr dng orf srf fax
    File: mime.convs
    Add the following line in bold:
    text/css                              application/postscript                    33          texttops
    text/html                              application/postscript                    33          texttops
    image/urf                               application/vnd.cups-postscript 66           pdftops
    image/gif                              application/vnd.cups-postscript          66          imagetops
    image/png                              application/vnd.cups-postscript          66          imagetops
    image/jpeg                              application/vnd.cups-postscript          66          imagetops

    Arrr - your Printer is AirPrint capable. You are printing direct from an iOS device to the printer. Some printers need a firmware update - others will work with iOS 6 straight away.
    The issue above relates to Mac OS X Server 10.6.8 (not client) and in relation to Print Services. You can use 10.6 Server and AirPrint to Any printer you like - not just an AirPrint ones. This is what AirPrint Activator does for client -  the above fix mends for Server.
    Glad you got you problem solved anyway.
    Oli

  • Setup FB for PHP 4.5.1 to work with linux zend server ce edition

    Hi,
    I'm new to FB and hope that someone can help me.
    Using some tutorials I've found I have installed Zend Server CE on my windows pc and created a project which accesses a database. This is all working as I would expect in that I can introspect the services and everything works.
    As the next phase in my learning I am now trying to move the Zend Server CE onto a seperate RedHat linux server so that the services are not bound to my pc which has a dynamic ip address.
    I used the yum repository to install the zend server ce with php 5.3 support and this all went as expected.
    I've created a new remote project using SSH to access the remote server. When I did this i noticed that the "public" folder and the amf_config.ini and gateway.php files are not automatically created as they were when I used my local pc.
    Also when I create a php service and right click on it the "create php service for flex" option is not available.
    I was hoping that everything would remain the same as when I used the locally installed zend server ce but it seems there is more configuration required and I'm not able to find any current tutorials which cover how to get this working from both the zend server ce side as well as the local flash builder for php settings that need to be set for the project.
    Can someone point me to a tutorial on how to get flash builder for php working with a remote linux copy of zend server?
    There are plenty of tutorials which cover how to do this if you install zend server locally with FB and use localhost and a local webroot....
    Any help would be greatly appreciated... If I work out the steps to do this I would be more than happy to do up a youtube video of the process to help other new users.
    Thanks
    Steve

    What I would like to do is this.
    In Flash Builder 4.5.1 for PHP I want to create a "Flex and PHP Project"
    I want the PHP project to use the Zend server that I have configured on my linux server 192.168.214.212 ip address.
    In  the flash builder for php, php project I want to be able to create new  functions and classes and then as I do this have them uploaded to the  linux zend server via ssh.
    I also want to be able to "Introspect" the services and have them create the Value Objects in my flex project.
    Then when I debug or launch the project I want it to use the services on the linux server.
    If  you have zend server installed on the same windows pc (localhost) as  flash builder for php all of this works automatically, it creates a  public folder and also generates the gateway.php file automatically and  everything works with out any manual configuration.
    The problem I  have is that I cant figure out how to change it so that it uses the  linux server and I know it's not as easy as just changing the ipaddress  of the server and uploading the files to the linux server webroot as  I've already tried this and it doesn't work.
    I can ping the linux server and access the zend server admin page.
    I  can get the flash builder php project connected to the server  filesystem (via ssh) and have it upload the php as I change them.
    The two things that are not working are Introspect and also the gateway.php and amf_config.ini files are not working.

  • Does jsf components in wsad works with any application server ?

    I 'm working with wsad 5.1.2 and using JSFcomponents and testing on the WAS test.
    then i will deploy on jboss AS.
    are the custum wsad componenets depoyable on any AS ?
    thanx a lot

    i used a jsf with data caching on which i put a data grid (a wsad component)
    can you help me to solve the error ?
    type Exception report
    message
    description The server encountered an internal error () that prevented it from fulfilling this request.
    exception
    javax.servlet.ServletException: javax.servlet.jsp.JspException: com/ibm/etools/wdo/datagraph/DataGraph
         org.apache.jasper.runtime.PageContextImpl.doHandlePageException(PageContextImpl.java:821)
         org.apache.jasper.runtime.PageContextImpl.handlePageException(PageContextImpl.java:758)
         org.apache.jsp.dataGrid_jsp._jspService(dataGrid_jsp.java:103)
         org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:94)
         javax.servlet.http.HttpServlet.service(HttpServlet.java:810)
         org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:324)
         org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:292)
         org.apache.jasper.servlet.JspServlet.service(JspServlet.java:236)
         javax.servlet.http.HttpServlet.service(HttpServlet.java:810)
         com.ibm.faces.context.MultipartExternalContextImpl.dispatch(MultipartExternalContextImpl.java:320)
         com.sun.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:142)
         com.sun.faces.lifecycle.RenderResponsePhase.execute(RenderResponsePhase.java:87)
         com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:200)
         com.sun.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:117)
         javax.faces.webapp.FacesServlet.service(FacesServlet.java:198)
         org.jboss.web.tomcat.filters.ReplyHeaderFilter.doFilter(ReplyHeaderFilter.java:75)
    root cause
    java.lang.NoClassDefFoundError: com/ibm/etools/wdo/datagraph/DataGraph
         com.ibm.odcb.jrender.emitters.WDO4JSEmitter$Transformer.<init>(WDO4JSEmitter.java:116)
         com.ibm.odcb.jrender.emitters.WDO4JSEmitter.Init(WDO4JSEmitter.java:214)
         com.ibm.faces.bf.renderkit.ClientDataRenderer.encodeEnd(ClientDataRenderer.java:76)
         javax.faces.component.UIComponentBase.encodeEnd(UIComponentBase.java:712)
         javax.faces.webapp.UIComponentTag.encodeEnd(UIComponentTag.java:604)
         javax.faces.webapp.UIComponentTag.doEndTag(UIComponentTag.java:527)
         com.ibm.faces.bf.taglib.ClientDataTag.doEndTag(ClientDataTag.java:101)
         org.apache.jsp.dataGrid_jsp._jspx_meth_odc_clientData_0(dataGrid_jsp.java:185)
         org.apache.jsp.dataGrid_jsp._jspx_meth_hx_scriptCollector_0(dataGrid_jsp.java:157)
         org.apache.jsp.dataGrid_jsp._jspx_meth_f_view_0(dataGrid_jsp.java:128)
         org.apache.jsp.dataGrid_jsp._jspService(dataGrid_jsp.java:94)
         org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:94)
         javax.servlet.http.HttpServlet.service(HttpServlet.java:810)
         org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:324)
         org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:292)
         org.apache.jasper.servlet.JspServlet.service(JspServlet.java:236)
         javax.servlet.http.HttpServlet.service(HttpServlet.java:810)
         com.ibm.faces.context.MultipartExternalContextImpl.dispatch(MultipartExternalContextImpl.java:320)
         com.sun.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:142)
         com.sun.faces.lifecycle.RenderResponsePhase.execute(RenderResponsePhase.java:87)
         com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:200)
         com.sun.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:117)
         javax.faces.webapp.FacesServlet.service(FacesServlet.java:198)
         org.jboss.web.tomcat.filters.ReplyHeaderFilter.doFilter(ReplyHeaderFilter.java:75)

Maybe you are looking for

  • Exporting and importing applications/workspaces

    I am currently on a testing workspace and want to put the application/workspace to another workspace. I know the export and import commands but my concern is the application import. The application is linked to a sample table caled "Samp" and now I w

  • How to insert the summary symbol? (sigma, Σ)

    Hello SAP friends, can you please help me, how to enter the summary symbol (greek sigma, u03A3) into the smartform? We have non-unicode system with installed languages EN, DE and CS. Code pages 1100 and 1160. Thanks for help in advance. Cheers! - Ste

  • Cacao agent is not available

    I have installed dsee6.1 binary with agent running on default port 11162. I also installed dscc6.1 on the same server (host). When I was trying to create a ds instance through dscc, it occured a problem as following: Could not contact the DSCC agent

  • When & how to use default settings option in job scheduling with BO 4.1

    Hi, With BO 4.1 we got new features and one of them is "Default Settings" option in the job scheduling. While scheduling a report in CMC we are getting below attached screen. I want to know when and how to use this option? while scheduling job on que

  • Photoshop appears to save, but hasn't.

    I, as well as a couple other coworkers are having an issue. We're working with rather large files, notably due to many nested smart objects. We hit save and everything appears as though it is saving, only to find out after we've closed out the file t