Action Profiles for Order Confirmation

Hello,
  I need to set up basic action Profile for sending emails upon order confirmation. So I set up 2 actions inside an action profile
1. One action to send  an email  based on partner function Sold to Party
2. Another action to send email based on partner function Bill -to Party
When I go to the order, I can see only the Action for Sold to Party but not the other action. I need both these actions to execute one after another/or simultaneously
Both these actions do not have a start condition.
Both these partner functions is different
*Email address have been maintained.
I tried changing the sort also to see if it would make a difference, It is just not picking up the second one action.
Can anyone help me out!!!
Thanks,
Karthik

Hi Karthik,
U have to check u r Action setting for u r action defination tick the below check boxes:
Schedule automatically
Changeble in Dialoug
Executable in Dialog
Also tick on Partner Dependent check box
Note : Check u r schedule condition for action condition b'cos without schedule condition fullfilled u r action condition will be appeared.
Hope it'll help u.
Regards,
Dipesh.

Similar Messages

  • To create varaibles in Mail Forms for Order Confirmation

    Hi All,
    I am having an requirement to send an email for order confirmation with some customer dependent data and some product data to be sent along in the mail, This has to be done through action.
    I want to use mail forms for this but in this I am not able to create variables in the mail form through which i can pass th value to the variables in the mail form.
    Please suggest what to do for variable creation in mail form.........
    Is there any standard oder confirmation template available as it is available for campaign??????
    Thanks and Reagrds
    Mayank

    Hi Mayank,
    I am not sure but u can try below standard smartforms :
    CRM_SERVICE_CONF_EXT
    CRM_ORDER_SERVICE
    Regards,
    Dipesh.

  • Output Control Routine for Order Confirmation

    Hi,
    I have a problem in sending out order confirmation when the customer have a credit block, no order confirmation is being sent.
    Checked on transaction NACE, the routine for Order Confirmation (Routine 2), returns a sy-subrc =4
    when  the credit block is set. What is the best way to correct this?
    Thanks,
    Catherine

    Create the new routine in VOFM->Requirement->Output Control. Make the required changes in routine source text and assign it to output procedure (NACE).
    Thank You,
    Ganesh

  • Standard print program for order confirmation

    Hi All,
    I have created smartform for sales order confirmation,now i want to attach it to output type i need standard print program for order confirmation.Do we have any standard program for the same ?
    Thanks in advance
    Shrila

    Hi Shrila,
       refer to the thread below:
    Order confirmation  smartform
    With luck,
    Pritam.

  • Smartform print program for order confirmation

    Hi experts.
    I am looking for a smartform print program for order confirmation.
    The order confirmation in standard is a script with the name RVADOR01 and I tried to copy and change but I don't know which to eliminate and whcih to keep it.
    If any body written the program already please provide me or provide the link to check.
    Thanks in advance
    Sai

    this is the processing form.
    form processing.
      data: lf_fm_name            type rs38l_fnam.
      data: ls_control_param      type ssfctrlop.
      data: ls_composer_param     type ssfcompop.
      data: ls_recipient          type swotobjid.
      data: ls_sender             type swotobjid.
      data: lf_formname           type tdsfname.
      data: ls_addr_key           like addr_key.
      data: document_output_info type  ssfcrespd,
            job_output_info type ssfcrescl,
            job_output_options type ssfcresop.
      perform get_data.
      check retcode = 0.
      perform set_print_param using      addr_key
                                changing ls_control_param
                                         ls_composer_param
                                         ls_recipient
                                         ls_sender
                                         retcode.
    *Get the Smart Form name.
      if not tnapr-sform is initial.
        lf_formname = tnapr-sform.
      else.
        message e001(/smb40/ssfcomposer).
      endif.
    determine smartform function module for invoice
      call function 'SSF_FUNCTION_MODULE_NAME'
        exporting
          formname           = lf_formname
        importing
          fm_name            = lf_fm_name
        exceptions
          no_form            = 1
          no_function_module = 2
          others             = 3.
      if sy-subrc <> 0.
      error handling
        retcode = sy-subrc.
        if sy-subrc = 1.
          message e001(/smb40/ssfcomposer).
        endif.
        if sy-subrc = 2.
          message e002(/smb40/ssfcomposer) with lf_formname.
        endif.
        perform protocol_update.
      endif.
      call function lf_fm_name
        exporting
          archive_index        = toa_dara
          archive_parameters   = arc_params
          control_parameters   = ls_control_param
          mail_recipient       = ls_recipient
          mail_sender          = ls_sender
          output_options       = ls_composer_param
          user_settings        = ' '
          is_nast              = nast
          is_vbdka             = vbdka
          is_addres            = addr_key
        importing
          document_output_info = document_output_info
          job_output_info      = job_output_info
          job_output_options   = job_output_options
        tables
          it_vbdpa             = tvbdpa    "Item information
          it_vbdpau            = tvbdpau   "Subitem numbers
          it_vedpa             = tkomservp  "Contract Item Validity
          it_vedka             = tkomservh  "Contract Header Validity
          it_vedpn             = tkomservpn "Contract Item Cancellation Data
          it_vedkn             = tkomservhn "Contract Header Cancellation DA
        exceptions
          formatting_error     = 1
          internal_error       = 2
          send_error           = 3
          user_canceled        = 4
          others               = 5.
      if sy-subrc <> 0.
        retcode = sy-subrc.
        perform protocol_update.
    get SmartForm protocoll and store it in the NAST protocoll
        perform add_smfrm_prot.
      endif.
    endform.                    "processing

  • No condition maintained for Order Confirmation output type but still active

    Hi,
    I have NOT maintained any Condition record for Order confirmation Output(BAFX) but still it is generated and Fax instruction is being sent to the Sold to Party. Also i found that NO condition record for Order confirmation output(BA00) is also maintained but still Order confirmation is still being triggered.
    Actually i want that NO Fax instruction is to be sent for Order confirmation for some of the customers.
    Kindly advise.
    Thanks,

    Hi vk@sap,
               Check in the output analysis how the output was determined, so that you can know why they're still determined.
    Thanks,
    Mariano.

  • Why we create settlement profile. What master data must exist in sap before creating settlement profile for order.

    Why we create settlement profile. What master data must exist in sap before creating settlement profile for order.

    As mentioned above, settlement is to post the cost to cost centers or any possible receivers as per the settlement profile. PM / Service orders, WBS elements, etc., can be temporary cost bearers from which cost should be settled to some permanent receivers.
    Cost elements / Cost element groups should be available as Master data before configuring settlement profile.
    To answer your latest query, there are 2 type of cost centers.
    Sender Cost Center - Against this, labor / internal activity price will be maintained in KP26. This cost center will be maintained in PM / PP work centers. While creating PM / PP orders, one of the work centers & activity types will be mentioned. Based on the KP26 entry for the combination of Activity type & Sender cost center, price will be picked & calculated according to work hours / labor hours maintained in PM / PP orders.
    Receiver Cost Center - Receiver cost center is the department / location cost center to which cost should be settled. Only receiver cost center will be maintained in settlement profile. Sender cost centers will be picked up automatically from work center.

  • Create Action Profile for Service Complaint

    Hi All,
    How to create the action profile for service complaint. I am working in CRM Standalone server. I gone through that service complaint doc and found that for this transaction we have to define the actions like CREATE RETURN REQUEST, CREATE SPARE PART DELIVERY, CREATE QUALITY NOTIFICATION, CREATE CREDIT/DEBIT MEMO REQUEST AND CREATE TASK. Can Anybody guide me how can I achieve this ans assign to my transaction type ie Service Complaint.If any body has the doc to achieve this can send it to
    [email protected]
    Valuable answer will be appreciated.
    Thanx
    Saravana

    Hi saravana
    want actions in transactions then use this link
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/c87bb93d-0b01-0010-a0b4-b04d7fda745f
    regards
    Vinay

  • Standard smartforms for order confirmation

    Hi all
    i search the standard smartforms for order confirmation. What's the name for this form....
    i have only find for invoice LB_BIL_INVOICE and for Delivery LE_SHP_DELNOTE, but not for oder confirmation....
    thx abap_begin....

    Hi,
    For the printing of the order confirmation there is a standard script RVORDER01. You can find this in transaction NACE by choosing application as V1 then output type as BA00 and then Processing routines.
    Regards
    Dillip Sahoo

  • How to create an Action Profile for a Survey

    Hi
    Can you please help me with the steps to create an Action Profile for a Survey. Eg. If the user creates a like Lead / Service, Action profile assigned to the Transaction type has to trigger the Survey.
    Thx

    Hi Kalees,
                Survey is nothing but a Questioner that is Represent the Feedback for a Particular Transaction.
    Controlling Survey by a Action Profile is possible to some Extent indirectly.
    One way of Controlling the Survey Execution based on System Status
    Go To:Customer Relationship Management>Transactions>Settings for Activities>Questionnaires>Define Determination Criteria for Questionnaires Define a Criteria Set for a Particular Status,Here what ever Status Assigned are Responsible for the Survey Form to Appear in that Transaction Type at that Particular Status.
    In Define Determination for Questionnaires: Business Activity:assign the Criteria Set that you have Created to your Survey Form
    Go To:Customer Relationship Management>Transactions>Basic Settings>Status Management>Change Status Profile for User Status The Status Profile that you are using Ensure that the System Statuses are Assigned to a User Status on which you want the Survey Determination to Happen.
    Direct Action Trigger for Survy Form is not Possible
    This is one way to Control the Transaction Type Status and in mean you shall indirectly get Control over the Survey Form
    Hope it Answers your Queries..
    Thanks and Regards,
    RK.

  • Action profile for send email to multiple partners

    Hi
    i need to send Smartforms mail using action profile to all partners assigned in the partners tab.
    Is there some standard way of doing it other than creating partner dependent  action profile for each partner?
    Thanks
    Itty

    hi Itty,
    based on my knowledge and experience, there is 2 ways for sending a smartforms via mail in action, ie :
    1. using smartforms mail
    2. using method.
    for option 1, only can be send to one target only. therefore usually i used the option 2.
    in option 2 basically you create an implementation class from defenition class EXEC_METHODCALL_PPF.
    the implementation class basically just a program, so in this implementation class you can get all the partners in the partners tab using function modul CRM_ORDER_READ and get all recipient mail, generate the smartforms and send it as attachment to all mail target.
    hopes it helps
    cheers

  • COMAC - COHV: manage object profile for order information system

    Hi,
    when you carry out an collective availability check from transaction COHV or COMAC, it is possible to select a layout or a profile. The layout can be defined within the transaction.
    What about the profile ? I can't find how to create a new profile in the  customizing for order information system.
    In standard the profiles are:
    000001 standard profile
    000002 pick list
    000003 collective availability check
    000004 documented goods movements
    Do you have any idea where the profiles can be maintained ?
    Many thanks
    Regards

    Hi,
    Go to SPRO > Production >Shop Floor Control > Information System>Define Profile for Order Information System.
    Hope this helps
    Regards
    Ali

  • Output Through FAX and Email for Order Confirmation

    We are yet to have this in our system and in requirements gather phase for my FS. I request you to help me in finishing this .
    so far i considered the following
    The following information is required :
    1. To all SD documents ? ( For eg : Order Confirmation,Delivery Note ,
    Legal invoice )
    2.Need to have a fax number/Email maintained for a customer
    3. Frequency of the ouput?
    4. Is duplication of output through email/Fax is required ?
    5. If sent by mail, in simple mail/ an attachment in pdf required and
    what shall the subject line contain?
    Please guide if i am Missed any requirement gathering . pls write me or send some kindaa FS

    Hi Yuvraj
    Kindly check the links for the output configuration and other inputs also
    [https://wiki.sdn.sap.com/wiki/display/ERPLO/OutputDeterminationOverview]
    [https://wiki.sdn.sap.com/wiki/display/ABAP/SendSpoollistofbackgroundjobtoSAPinbox]
    [https://wiki.sdn.sap.com/wiki/display/ABAP/PDFDownlaodByCreatingSpool+Request]
    Regards
    Srinath

  • Action profile for Business Partners

    Dear SAPers,
    Currently Action profile, can be easily set-up for Business transactions (Opp, Activity,etc.).
    Examle: When Opp status is changed (schedule condition, start condition), Business Parnter attribute is adapted (Execution).
    Does anyone know if Action profile can  be set-up for Business Partner?
    Examle: When BP is changed (schedule condition, start condition), Business transaction attribute is adapted (Execution).
    In standard, it does not look possible.
    Should it be possible from Business Parnter BADI (check_before_save) to generate the schedule condition of a set of Business transactions e.g Opp.
    Thanks for any help.

    Hi Marc,
    Yes. As of today you can customize the Action Profiles to trigger actions for Business Transactions only. This is not available for the Business Partners. So, your approach of Business Partner BADI sounds a very reasonable solution to achieve the functionality.
    And for the Business Partner BADI that you mentioned here I was unable to find any such BADI in SAP CRM 7.0 system. Can you let me know from which system you got that BADI name?
    I got a BADI of BP - COM_PARTNER_BADI. Can you have a look at the implementations of it so as to have a understanding of it's usage.
    Hope this helps.
    Thanks,
    Samantak.

  • SDQ segment for Order Confirmation

    hai all
             customer sends in purchase order with only one line item but has 10 ship to party with their respective quantity. this is done with help of ILN(international location no).we have custom segment below E1EDPA1, which has ILN, qualifier for ILN, quantity, UOM fields init.
    Individual sales order is created for every ship to party and order confirmation idoc is also created and collected. Now with custom program i have to create single idoc with custom idoc type ZORDERS05 with all
    the collected idocs, which should have only one line item and all ship to paty in ILN(custom segment). can any one help me in this matter. if you have any code for this scenario pls provide.
    thanks and regards
    vijay

    Hi,
    For the printing of the order confirmation there is a standard script RVORDER01. You can find this in transaction NACE by choosing application as V1 then output type as BA00 and then Processing routines.
    Regards
    Dillip Sahoo

Maybe you are looking for