Activating C&V Profile in Controlling Area Error URGENT

Hi Experts,
I'm having problems in activating C&V Profile. I have done all the set up in FI, CO, and PCA. They are all consistent but when i am activating it says the following errors:
Create a results analysis version for valuation view ID01
Version 0 in controlling area ID01 does not allow variance calculation
Actual data already posted in controlling area ID01
What should i do?
Please help me.

Hi
Please check if you have define the version in IMG
Controlling->General Controlling->Multiple Valuation Approaches/Transfer Prices->Basic Settings->Create Versions for Valuation Methods->
If yes
Then in transaction code OKG9 Check the same version if its not reflecting create the same for controlling area ID01 for (WIP)
If the answer if helpful kindly assign points
Thanks & Regards
Mahesh

Similar Messages

" Active Company Code check in Controlling Area"

Hi All
while assinging the Real Time Integration variant to company code. Getting the following error as
" Active company code check in controlling area."
any one can plz suggest me.
Moderator: Please, search before posting

Hi Ashok,
Thanks for the response.
Here in my case, when I insert the Tcodes related to conrolling like(KO01,KO02,KO03 etc) in a role, then I dont find any authorization objects(bukrs) which is related to the company code in the authorization genaration area in PFCG. So there is no way I can maintain values in them.
Please suggest any alternate solution.
Thanks and Regards,
Abdul Khyoom A

Controlling area currency - urgent

Hi,
In a project we are using Controlling Area Currency as INR. As our group company is europe based they want us to change to EUR. We are also using PCA where currency is INR. I want to know the pros and cons of changing the same to EUR from INR.
Bye,
Ramesh

Hello
Check this if it could help you
When you create a controlling area, you specify whether the controlling area currency may differ from the company code currency, and which particular currency is to be the controlling area currency.
You can use the company code currency or the currency of a different organizational unit recorded as a parallel currency in the company code. You can also use a separate controlling area currency not dependent on the company code currency.
Cross-company code cost accounting can therefore be performed for company codes that use values recorded in different currencies. SAP recommends that you specify a consistent parallel currency for the company codes, and use this as the controlling area currency. In this case, postings in Controlling are made that are relevant for Accounting.
The following currencies are valid in Controlling:
· Controlling area currency
The system uses this currency for cost accounting. This currency is set up when you create the controlling area. It is based on the assignment control indicator and the currency type.
(see: Specifying Controlling Area Currency )
· Object currency
Each object in Controlling, such as cost center or internal order, may use a separate currency specified in its master data. When you create an object in CO, the SAP system defaults the currency of the company code to which the object is assigned as the object currency. You can specify a different object currency only if the controlling area currency is the same as the company code currency. There is an object currency for the sender as well as one for the receiver.
· Transaction currency
Documents in Controlling are posted in the transaction currency. The transaction currency can differ from the controlling area currency and the object currency. The system automatically converts the values to the controlling area currency at the exchange rate specified.
The system always translates actual data with the average rate (exchange rate type M).
You store the exchange rate type for each currency. You can specify a different exchange rate type for planning data in the version.
All three currencies are saved in the totals records and the line items. This enables you to use the different currencies for evaluations in the information system. This is only possible if you specified that all currencies should be updated for the given controlling area (see: Maintain Controlling Area).
The transaction currency is USD, the controlling area currency is EUR, and the object currency is SFR (Swiss francs). The system converts the amounts as follows:
1.) From transaction currency to controlling area currency (USD ® EUR)
2.) From controlling area currency to object currency (EUR ® SFR)
The following additional currencies may also appear as controlling area currencies in Controlling if you use cross-company code cost controlling:
Local Currency:
Company code currency (country currency) used for local ledgers in external accounting.
For each company code you can specify one or two parallel currencies (= second and third local currencies) which are stored in the documents and updated parallel to the local currency in the general ledger.
Group Currency:
Currency in which the group balance sheet is displayed.
You can specify it as a parallel currency (additional local currency) for a company code.
Hard Currency:
Secondary currency for countries with high inflation. You can specify it as a parallel currency (additional local currency) for a company code. You need to specify the hard currency in the detail screen for the corresponding country.
Index-Based Currency:
Country-specific, fictitious currency stipulated in certain countries with high inflation for tax returns. You can specify it as a parallel currency (additional local currency) for a company code. You need to specify the index-based currency in the detail screen for the corresponding country.
Global Company Currency:
Currency used in a corporate group. In the CO application component you can create companies to represent divisions, regions, or product groups.
You can specify it as a parallel currency (additional local currency) for a company code. You need to store the global company currency in the detail screen for the corresponding company.
For more information on defining parallel currencies, see Customizing under Financial Accounting ® FI Global Settings ® Company Code ® Parallel Currencies ® Defining additional local currencies.
Reg
*Assign points if helpful

How to find if Reconciliation Ledger is Active or not for Controlling Area

Hi,
How to find if Reconciliation Ledger is Active or not for Controlling Area?
Thanks

Hi,
You can check using OKKP.
Further TCode KALA is useful in activating/deactivating etc., for the Controlling Area.
Rgds.

No tolerance limits maintained in controlling area 5555, profile 000001

Hi,
While Doing internal order budget i am getting the below error.Kindly help me in fixing that error.
No tolerance limits maintained in controlling area 5555, profile 000001
Thanks
Kishore

Hi Kishore FICO,
Menu path to maintain tolerance limit for internal order:
SPRO > Controlling > Internal Orders > Budgeting and Availability Control > Define Tolerance Limit for Availability Control...
regards,
ng chong chuan

Error while assigning Operating concer to Controlling Area

Hi...
while I am trying to assign operating concern to controlling area, the system is showing the following error message.
Diagnosis
Controlling area 7500 and operating concern 7500 have different fiscal year variants (01 and K4). However, for cost center assessment, settlement, and many other types of postings to Profitability Analysis, the controlling area and the operating concern must have identical fiscal year variants, otherwise error messages or serious data inconsistencies can occur.
But i already changed fiscal year variant from K4 to 01 in Operating concern and i run the generate operating concern environment also. still the system is showing the same error message.
Is there anything more i need to do after changing fiscal year variant in Operting concern.
Please help me.
Thank you,
Regards,
Santosh

I have got the solution.
Thank you,
Regards,
Santosh

MSS BW error: My Controlling Area (SAP Exit, CO Pers.) (*)

Hello,
We're starting to set up MSS My Budget. When I try to run a BW cost center report from within My Budget, I get an error indicating that the application can't determine a value for "My Controlling Area". Please advise how I can fix this. Authorization? User Exit?
Thanks in advance.
Regards,
Dennis

Hello,
This problem has occurred AGAIN! I am at a loss of how to resolve.
E.g.
Hours posted = 168 (@ 50 Eur/hr)
Eur = 8,517.60
GBP = 75,396.72
The object currency is Eur however the controlling area currency is GBP. When converting back to GBP it is completely incorrect. Any help would be much appreciated!
Many thanks,
NVSpace

Cost of Sales activation in Controlling area

Hi Friends,
Please let me know the IMG activity where we can check if 'Cost of sales accounting' is active in a controlling area or not.
Please help me navigate.
Thanks & regards,
Shilpi

Hi,
It's more accurate to say whether it's active for company code.
IMG - Financial Accounting - Financial Accounting Global Settings - Company Code - Cost of Sales Accounting - Activate Cost of Sales Accounting.
Regards,
Eli

CO down payment update is active in controlling area , How to Deactivate?

Q1) CO down payment update is active in controlling area , How to Deactivate the same?
I am trying to post,vendor Downpayment in F-48, it is aking for Maintain default cost element in controlling area .
Is that required?

Hi,
Generally, SAP makes that the down payments are always updated in CO. To maintain the default cost elements, you could use OKEP transaction. However, it's possible to deactivate this function by implementing note 388843.
Regards,
Eli

Extraction error "Target cost version in controlling area does not exists"

Hi Gurus,
I am trying to pull some data from a SAP OLTP system into SAP BW 710 system, using extractor "0CO_PC_02". The data load is failing with the below error message:
Target cost version in controlling area does not exist     KN     147
Target cost version 2 not defined. Check your entry     KV     35
Internal program error ( Order 000010510554 Version 002 )     RM     11
Errors in source system     RSM     340
The same error is thrown when I am trying to execute the extractor in RSA3 in the source system.
Please help me with the resolution of the same. It's a high priority job we are handling as of now in this.
Thanks & Regards,
Vikas Kr.

You are attempting to display data on a target cost version that does not exist in controlling area.
see this http://forums.sdn.sap.com/thread.jspa?threadID=1609418
http://www.consolut.com/en/s/sap-ides-access/d/s/doc/YV-KN147

Error message when maintaining number range for controlling area

hello everybody:
I am just creating a new controlling area in current system, it's ok for me to maintain (tcode KANK)the CO number range in Development system, but when comes to QAS, I want to maintain the number range groups (F6) manually, but not possible. A error message is throwed out by SAP saying:
No elements exist for the object/sub-object 0060.
Message no. NR004.
Can anyone give me any suggestion on what reason this message comes?
Regards.
Andy

Hello Andy,
Please apply the OSS note 4958. This will help you to solve the problem with error NR004 and to define the CO number range objects.
Kind regards,
Carmen

Error : profit center is locked for controlling area

Hi Experts
profit center is locked for controlling area. Like this error is comning while doing MIRO, excise invoice. Please let me know the solution. Profit center mentioned in material master is different.

Dear,
This profit center is locked in its master under Indicators tab. Use transaction KE52 to unlock it if you want.
Your concern to Profit Center being picked up is different then Material Master then use transaction OBBH and notice the substitution assigned to your compay code for call up point 2. Then use transaction GGB1 and check any profit center derivation is done.
Regards,
Chintan Joshi

Error - control indicators for control area do not exist

Hi All,
When I am trying to hire a person and entering his personal data, I am getting this error:
control indicators for control area XXXX do not exist
Please help

I'm guessing this error is out of the Coding Block check for Controlling.. ie the function call COBL_EX_CODINGBLOCK_CHECK.. put a break-point inside this function call & verify if any settings are missing..
~Suresh

I am running Mac OS 10.6.7 I cannot run a java based program from the net when parental controls are set the error is The error is Load: class installer.CheckVersion 13. class not found Help!

I am running Mac OS 10.6.7 I cannot run a java based program from the net when parental controls are set the error is The error is Load: class installer.CheckVersion 13. class not found

Then, talk to the person running the lab.

De activation of Controlling Area

Hi,
We have got a situation that we need to de activate the existing controlling area and create a new controlling area as per the mutual agreement between our co & the client.
and we have got 1:1 ratio between controlling area & company code
Now the system will not allow me to delete the company code assignment from the controlling area as the master data exists for this particular company code.
how do i proceed with this kind of situation.
My concerns are
1. How do I assign the company code to a new controlling area which has already been assigned to a particular controlling area.
2. Now if i go with the new controlling area which i have created then how does the system respond to the old open item data which has been entered for old cost centres,profit centres.
What will happen when i start clearing this transactions how does the system responsd to this kind of situations.
Kindly advise
Regards
Sunil

Hi Sridhar,
Thanks for your prompt response but I have 2 queries.
1. Will the system allow me delete the master datas when there is transaction data which exists in the masters for which we want to delete.
2. Secondly what will happen when i try to clear the open item which have been booked under a particular cost centre and profit centre which were assigned to my old controlling area and when i start clearing the old items with the new controlling area activate how does system respond to it.
Will it allow me to clear these transactions/allow processing of the old data which had been fed in the old controlling area.
Plz help me out in this.
Regards
Sunil

Activating C&V Profile in Controlling Area Error URGENT

Similar Messages

Maybe you are looking for