Copy Inactive Version to Active Version in MC78

Hi PP Gurus,
I am not able to copy the inactive version (019) to Active Version (A00) in TCode MC78, it gives the message A00 already exists.
But when i want to transport the values to Demand Mangement (thru TCode MC75) it will ask for Active Version.
Please suggest where am i doing wrong?
Thanks in Advance,
Regards
Rehman
Points will be Rewarded for a Detail Answers.

Hello Rehman,
The message what you are getting is standard and warning message. It is not the error message.
While copying from inactive version to avtive version (A00), this will populate, you just have to enter omce again, then you will get one more pop-up saying "A00 will be reset", agaian you have to accept the message.
Now you check your version will be copied from MC88 transcation by clicking on active version.
If problem solves rewards your points.
Regards
TAJUDDIN

Similar Messages

Transactional Data Copy from In-Active version to Active version(APO)

Hi
I want to copy the Transactional Planning data from Inactive version to Active version, so that from Active version I can transfer that data to ECC.
Kindly give the valuable inputs for my Query.
Regards
Guru
Edited by: gurvarender singh on Jan 31, 2009 11:18 AM

try the transaction /SAPAPO/VERCOP - to Copy Planning Version
select if u want to copy the entire version (master as well as transaction data)
u can also trigger parallel processing and also restrict
Restriction via
Location Product
Location
Locatn Type
Production Plannr
SNP Plannr
Demnd Plannr
Transptn Plannr
Purch. Group

Inactive version to active version

Hi Gurus.
In this scenario I want to convert the PIR's that I am getting from APO in inactive version and I want to convert it into active version before running the MRP.Pls suggest how to do it?

Hello Dardo,
    Mostly you can do planning with different version numbers in planned independent requirent.Unless and until you active the version, it will not transfer the independent reqmt to stock requirement list.
     To active any version number, go to change mode (T.C MD62) and give the material number, plant and version number which you want to activate and press enter, it will go to next screen.There besides material name field there is check box for version.Just tick that.Now if you see in stock reqmt list (T.C MD04) you will see the indep reqmt got transfered.
      Hope this way you will resolve your problem.

DTR: How do I set an older version as active version

Hello,
Using the DTR I can sync to a specific Version of a File using "Sync to this version" from the context menu of the Version Graph.
Now I want to set the Version I synced to as the active version. Is there a possibility to do this?
Greets Johann

Hi
When I understand the question right, then the intension is to have an older version now as the current active version in the workspace on DTR.
Up to now DTR does not yet provide this functionality. But there is a workaround:
- please sync the file to the version that afterwards should get active (e.g. using context menu in version graph)
- and copy the synced file to a temporary location
- then sync the file again to the current active version
- and check-out for edit this version of the file
- then copy the older version from the temporary location over the checked-out version
- check-in
Please be aware that this changes the current active version in the workspace and that this change is visible to everyone accessing the workspace.
Regards, Uli

Revert from Revised,saved version to active version

Hi all,
I have a saved version of the workflow. I want to revert back to the active version.
Can this be done and how?
Regards,
Srikar

What version is this? If you have more versions you can go back to the active one in the workflow builder. If you have only one version, you couldn't go back.
You can select previous version on the left side of the builder, where you can find the version of the current one.
Regards,
Martin

Changing Datasource modified version to active version

Hi all,
Datasource 2LIS_02_ITM is in modified verison in BW production,After transporting the datasource in R/3 side and replicating in production ,the datasource is showing still in modified version.Any idea to solve this problem.
Thanks
Rabi

Hi,
First make sure your datasource is active in R/3 production. You can check this in transaction - LBWE and in RSA3 extraction. If the datasource is inactive, RSA3 extraction gives 0 records.
If everything is in place in R/3, try to replicate in BI using transaction - RSDS.
You can also try activating your datasource using the below programms
RSDS_DATASOURCE_ACTIVATE_ALL
RS_COMSTRU_ACTIVATE_ALL
RS_TRANSTRU_ACTIVATE_ALL

We need to copy planning..etc from simulation version 002 to version 000,

Hi experts,
Our simulation Version is 002 and Active Version is 000
We need to copy planning..etc from version 002 to version 000, how to do. Explain me elaborate
Regards,
moon

Hi Moon,
There are two things in Copy Version Management.
1) Copy the master and transaction data from active to simulation version.
Transaction - /SAPAPO/VERCOP in this you can not copy from Simulation to Active.
2) Merge the Planning Versions.
Transaction - /SAPAPO/VERMER in which you can copy the planning area keyfigures from simulation version to Active Version.
Regards,
Saurabh

Active version LIS

Hi Gurus,
I have gone through the thread Re: LIS updation
Can you some please tell me how to delete Active version of LIS 000 and how to transfer from some other version to 000?
Thanks
Krishna

Hi,
Go to trnx OLIX, specify the info structure for which you want to delete or copy.
a. If you want to delete any version select "delete" and specify the version thereon.
b. If you want to copy then delete the active version, select "copy+delete" and specify the source version & target version (000).
Hope this will help you out in this.
Regards,
Vijay

Active version of BW Data Source Dev Appears inactive in Q

Hi All,
This is urgent..needs to move to prod today but I am stuck in D still!
Does anyone know why a particular BW data source which is active inn Dev might appear to be inactive in Q after the transport?
We tried manual replication, transporting replica and reapplying the transports, recollecting the data source in both r3 and BW
I also verified that I am collecting the active version in my transport
Thanks,
DB
Points will be assigned if I can get rid of this issue!
Edited by: Darshana on Jul 14, 2008 7:34 PM
Edited by: Darshana on Jul 14, 2008 7:34 PM

Hello Darshana,
Make sure the appropriate "Conversion of Source System names after transport" are maintained in target system QA and Prod.
RSA1 > Tools >...
Darshana,
Follow the above path...Go to Datawarehousing Workbench in QA tcode RSA1 and on the top you will see Tools > and follow from there...
Hope this helps....
Edited by: Chetanya Thanneer on Jul 14, 2008 10:15 PM

Copy Project to different CO Version down to activity level

We have tried to copy a project from one CO version to another using transaction CJ9B, but it only copies to the WBS element level. Is there a transaction that will copy a project to a different CO version that included components down to the activity level?
Thanks, Rae

In Cost Planning for CO version 0 (Plan version 0) in CJ40 you are planning costs at WBS level, not at activity level.
So where the question of copying activity cost come?
Activity costs come at activity level planning, not in plan version level.
Which as mentioned can be copied by simulation version, project version.
SSanjay

Active version and Inactive version in Product llocation plan

Hi Gurus,
We are using product allocation functionality, in which i would like to what is the importance of active and Inactive versions.
Which is the version in which we need to maintain the product allocation (MC94).
Regards,
Babs.

Hi dsk,
Thank you for the feedback on active version and inactive version.
My doubt is if you look in to transaction MC94 , we have two tabs one u201CActive versionu201D and other u201CInactive versionu201D.
When I maintained product allocation in Active version u201CA00u201D and executed the sales order product allocation is not happening. And then I tried to maintain the allocation under Inactive Version u201C000u201D then executed the sales order. Now the product allocation is happening and even the structure is getting updated after saving the sales order. So I need to under stand under which version we need to maintain the allocation so that allocation functionality will work during sales order creation.
Regards,
Babs

Error while Releasing a transport request - DSO 0SD_O03: Active version

Hi all,
I am getting below error when I am trying to release a transport request.
Object ODSO 0SD_O03: Active version differs from modified version.
I activated DSO again,but I was not successful to correct the error.Please help me correcting this error.
Regards,
Bob

check
match and copy while installing the business content
Match (X) or Copy
If the SAP delivery version and the active version can be matched, a checkbox is displayed in this column.With the most important object types, the active version and the SAP delivery version can be matched.
When a match is performed, particular properties of the object are compared in the A version and the D version. First it has to be decided whether these properties can be matched automatically or whether this has to be done manually.
A match can be performed automatically for properties if you can be sure that the object is to be used in the same way as before it was transferred from Business Content.
When performing matches manually you have to decide whether the characteristics of a property from the active version are to be retained, or whether the characteristics are to be transferred from the delivery version.
The Match indicator is set as default in order to prevent the customer version being unintentionally overwritten. If the Content of the SAP delivery version is to be matched to the active version, you have to set the Installindicator separately.
The active version is overwritten with the delivery version if
 the match indicator is not set and
 the install indicator is set.
check following thread
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/102906a4-f13d-2e10-7199-ce316ff254b8?QuickLink=index&overridelayout=true
Thanks and regards
Kiran

Active version in work center

Hi Gurus,
We have maintained various versions in SPRO under production-basic data-work center-capacity planning-active version of available capacity.
For a particular main work center we enter the active version in capacity header tab in the work center.
If I create a maintenance work order for that particular work center then
Do this active version gets copied to maintenance order ? ( currently it is not getting copied )
Do we have settings where in we can make this as a default value in maintenance order ? ( whatever set in work center will be copied to maintenance order )
My client have to enter version in every maintenance order created. The quantum is very large.
So client would like to have this active version copied from work center to maintenance order, like wise master data from an equipment gets copied to notification or order while being created.
Kindly reply at the earliest.
regards,
Maneesh

Hi ,
In standard SAP there is no field in maintenance order operation or order that captures Active version of Work Center capacity .., In which field ur currently entering manually ?
If u have defined any custom field in order operation to capture this data , then try to use user exit : IWO10016 PM Order: Cust. enhancement to check operation user fields to get this data automatically in Order operation from work center ..
regrds
pushpa

Copying transaction data between planning version - Not delete existing dat

Hello all.
I made copy from one version, like 000.
The result is Version A1 and A2. I copied everything(Master Data and Transaction Data).
For each version, i ran a MRP. But in differents periods. Like October and November.
After MRP, i have a lot Planning Orders in A1 and A2. But in differents months.
My question is: I want to merge A1 and A2 in another version(Merge only Planning Orders). How i can do this?
Using /SAPAPO/MVM or /SAPAPO/VERCOP i can copy all data from source to target. But always delete previous data.
Thanks
Best Regards.
Marcelo

This isn't the answer you WANT to hear. But there's no way to my knowledge to achieve your requirement using standard version copy functionality in APO.
One way to preserve the data for alternate / merged versions that I've found useful is to use the /SAPAPO/REL_TO_OLTP transaction to send volume data to the ECC client. If you are loading both inactive versions to BW, then you should be able to release that data from BW to ECC inactive/"long-term" simulation versions where it can be aggregated. That is to say, you could send A1 and A2 separately and they will simply add to one another, not overwrites (delete and re-create).
This being said, requirements using this transaction are sent as planned ind. requirements in ECC. This may not be the desired outcome that you're looking for, so you might have to be careful which key figure you send to represent volumes.

How to copy from one Version to Another version with single click

Hi Everone,
Users wants to copy from one version to another version with single click only. I.e Actuals to Planning etc.,
They don't want use standard COPY Data manager package to do this activity as this involves many steps.
Please let me know Is there any way to COPY with single click. Thanks in advance!!
Regards,
Viswanath

Hi Viswanath,
Use /CPMB/DEFAULT_FORMULAS
Then edit automatically created advanced script:
PROMPT(SELECTINPUT,,,,"%CATEGORY_DIM%,%CURRENCY_DIM%,%TIME_DIM%")
TASK(/CPMB/DEFAULT_FORMULAS_LOGIC,SUSER,%USER%)
TASK(/CPMB/DEFAULT_FORMULAS_LOGIC,SAPPSET,%APPSET%)
TASK(/CPMB/DEFAULT_FORMULAS_LOGIC,SAPP,%APP%)
TASK(/CPMB/DEFAULT_FORMULAS_LOGIC,SELECTION,%SELECTION%)
TASK(/CPMB/DEFAULT_FORMULAS_LOGIC,LOGICFILENAME,DEFAULT.LGF)
Remove bold lines and change the script name in line with your script name:
TASK(/CPMB/DEFAULT_FORMULAS_LOGIC,SUSER,%USER%)
TASK(/CPMB/DEFAULT_FORMULAS_LOGIC,SAPPSET,%APPSET%)
TASK(/CPMB/DEFAULT_FORMULAS_LOGIC,SAPP,%APP%)
TASK(/CPMB/DEFAULT_FORMULAS_LOGIC,LOGICFILENAME,YOURLOGICNAME.LGF)
Vadim

Copy Inactive Version to Active Version in MC78

Similar Messages

Maybe you are looking for