Activity BD-Maintain obj. in non-OwnerSys

Hi All,
Please explain me briefly regarding Activity BD-Maintain obj. in non-OwnerSys under authorization object S_TABU_DIS.
Thanks in advance,
Barada

Hi,
I am also trying to find out what activity BD allows users to do. I went in SUIM and found a bit more information:
Possible activity values under S_TABU_DIS:
02 - create, change or delete table entries
03 - Display table entries only
BD: Skip change lock for Customizing distribution
Can anyone please explain and provide example of what this activity allow users to perform?
Renée

Similar Messages

Active substitute maintained for a user is not getting workitems for approv

Hi,
Active substitute maintained for a user is not getting workitems for approval.Earlier he was getting
but now a days he is not getting.
Roles wise also , i checked, it is proper.
Please advise me on this.
Regards,
Niti

Hi Check Table HRUS_D2 for the user id and cross check it with the users pa record and IT 105.
Also check the email address maintained in su01. And further you can check with the org attrib forward??? is maintained.
I hope this helps.
Saj

Activity prices maintained manually..Is KSII/MFN1 possible?

Hi Experts,
We have this scenario:
1. Activity prices are entered manually in KP26.
2. All Costs are maintained as Activity independent costs.
3. For Production Cost centers, some costs (primary costs) are Activity relevant and others not relevant at all for Activity.
4. No Splitting structure maintained so far.
Now, we are considering calculating Actual Activity prices through KSII and then MFN1 for revaluating Process orders.
I tried KSII in our test system, where I got the following error message # KP211. I even tried by maintaining the Actual Activity type category '01' and Actual price indicator '05' in AT master, but no luck.
Short Text
All activity prices are manually entered
Diagnosis
All activity prices in controlling area , fiscal year , and version were determined and set as manually entered prices.
In actual price calculation, all plan activity prices, meaning those calculated automatically (activity price indicator 1 and 2) and those set manually (activity price indicator 3), are treated as if they have been set manually.
System Response
The SAP System cannot calculate activity prices automatically.
Processing is cancelled.
Procedure
Check your activity type planning. To calculate the activity price automatically, you must set the activity price indicator accordingly.
Proceed
Questions:
1.Given our case, is it possible to do KSII/MFN1? If yes, what configuration and master setup is required?
2. What accounting/CO entry posted MFN1. Especially, want to know if value also posted to CO-PA?
Thanks much for your time.
SC

Hi SC, 
 
sorry for my delay. 
 
Yes, you can process KSII even if you maintained planned activity prices manually. For this, the Activity type master should be activity price indicator "5" for Actual, hoever it's defalt value for planning (KP26). 
Could you check activity planning value in your period as follows; 
 
1. Go to transaction KP26 
2. Selection screen; 
 Set your version and year/period and also cost center/activity types in problem. 
 Push Next Layout button (Ctrl + F8) and set layout 1-204 (named "Control indicators"). 
3. Push "Overview screen" (F5) 
 
You can see plan price indicator and also ACTUAL price indicator, so you have to check if actual price indicator is not "7" or "Blank". If not, please set it with value "5" or "6". 
Hope you can understand what I wrote above, but if you have any queries, please feel free to ask me. 
 
Additonaly about your question regarding "activity independent" cost planning 
In F1 help document for field "Equivalence Numbers", there're useful description how activity-independent costs allocates activity type and activity prices calculates. If you do not use cost split or activity-depend planning, you can process activity price calculation by "Equivalence Numbers". it's easy-way to allocate cost to each activity type. you can see this field also in KP26 with layout 1-201 (sample) 
the following passage from field "Equivalence Numbers" F1 document. 
 
- Equivalence Numbers 
Weighting factor for distribution of activity-independent plan costs of a cost center onto the available activity types. 
- Use 
This field group serves to weight the activity types created in a cost center. After weighting, the activity-independent plan costs of a cost center are distributed onto the available activity types. 
-Procedure 
If you want to change or create equivalence numbers in planning, this field must be defined in the planning layout. If this field is not defined, any existing equivalence numbers will be displayed, but they cannot be changed. 
Examples 
You have planned the following activity types for cost center 4420: 
Activ. type Plan quantity Equiv. nr. 
 
FST 400 hrs 3 
REP 50 hrs 1 
RST 20 hrs 1 
 
 Total: 5 
This cost center has planned activity-independent costs worth $20,000 . These costs are distributed according to activity price calculation onto the iteratively calculated activity prices (cost rates) of the activity types: 
ATyp Fixed costs Fixed portion of activ. price 
 
FST 20,000 X 3/5 = 12,000 $12,000 / 400 hrs = 30 $/hr 
REP 20,000 X 1/5 = 4,000 $4,000 / 50 hrs = 80 $/hr 
RST 20,000 X 1/5 = 4,000 $4,000 / 20 hrs = 200 $/hr 
Edited by: Takashi Kotani on Feb 9, 2010 7:55 PM

Print activity in Maintain Activity: Which is the SAPSCRIPT o SMARTFORM

Hi to all,
to day a friend of mine have a problem with a print.
In the "Maintain Activity" (CRMD_BUS2000126 transaction) there is the possibility of printing the activity.
There is no immediate output but a spool.
We have to change the output, bue we don't now which is, the sapscript (and if the output is a sapscript)?
Do Anyone know about this?
Regards
Enzo

Enzo,
This is actually quite simple to manage for business transactions. You can control the customizing for actions by using the transaction SPPFCADM. In here you have the customizing for all the actions related to the business transaction. You can alternately get to the parts of this screen via the IMG
CRM->Basic Functions->Actions->Actions in Transaction.
For activitiy it appears that the system is using the standard smartform CRM_ACTIVITY_BUSACT01. I believe you can either redefine the form being used or create a new print action if needed. I personally would recommend that you might want to create a specific action profile for what your users will be needing and assign that to your document type for activities. However I assuming you have copied the standard activity transaction type to a Z-document type for customizing.
Action processing is very flexible and can be used to do almost anything in the background upon request in the business transaction. Another benefit is that action processing works the same in the PCUI or SAP GUI so no need to worry about which one to use.
If you have any more questions reply back, but take a look at the IMG documentation and the wizard and it should be relatively easy to configure.
Good Luck,
Stephen

Can I use a buisness version of Adobe Acrobat Pro on a computer that has already an active adobe ID with personal (non buisness versions) programms?

I have an Abode ID with Photoshop for private use.
For work I need an updated version of Adobe acrobat pro.
But how can I get it to work on the same computer?
Can I add a buisness version to the Adobe (private) ID?
Or can I use 2 adobe ID's at the same time?

I don't think there are such things as business and non-business versions of software as far as Adobe is concerned. How you manage the installations of the software you purchase from them is your call. If there is some protocol for doing this that is defined by your workplace then you should inquire with whomever manages that protocol.

HT1420 i just activated a new computer and none of my songs will play and i dont know why

I just activated a new computer and noneof my songs will play

There's a couple of ways to get through to the authorisation controls in the 11.0.x versions.
The control is still in the Store menu, but first (if you're using iTunes versions 11.0.x) you might need to bring up the menu bar to see the Store menu.
If you're using 11.0.x, click on the wee boxy icon up in the top-left corner of your iTunes to see the "Show Menu Bar" control, as per the following screenshot:
Then you'll find the control in the Store menu:
Alternatively, if you don't want to bring up the menu bar, it's still possible to get into the authorise controls via nested menus accessible from the wee boxy icon. Here's a screenshot of where to find them:

Activation of standars workflow for Non PO based Invoices

Hi All,
Please advise me with the following at earliest.
I have activated the standard workflow for the transaction FV60, so that the work item will be generated in the approver inbox for the release amount. I have done the settings, but iam stuck up at the transaction OBWF, it says to assign the users to the position or the organizational unit. I have created the Posistion in transaction code PO13 (Posistion in Business work flow), could you please let me know how to assign users to this position.

Hi,
For setting the organization object for each level using OBWF transaction, you have to select the entry in transaction OBWF (in which the WF Variant + Approval Path + Level+Amount will decide which agent to pick) and choose button "Details (OrgObject)".
Then in new window
1. choose button "Org object" of create (2nd button on tool bar) if already the org object is created and you just want to link. Then select JOB/Position/Organizational unit for which you want a linking. Then choose the org element by using the Search Term window. This will create the link for the level for which you wanted the user/user-group.
2. Choose button "Create org. unit" to create new org unit like Job or Position and then complete linking as specified in point -1.
You can test this by executing the function moudule "PRELIMINARY_POSTING_ACTOR1_DET" which is in the standard agent rule '00000139' which is linked to the standard task TS00007914.
Hope this will help you, but aswer for this is very late.
Regards,
Manju

Activation acrobat pro XI est non résolue

Hi,
j'ai vu que qqn prétendait avoir résolu l'activation or c'est faux : il ya des cas particuliers :
Ca ne fonctionne pas : j'ai installé mais je ne peux pas activer . Il ne reconnait pas mon numero de serie . Alors peut etre que ce que j'ai telechargé n'est pas le bon produit
Alors comment faire pour telecharger le bon produit ? Les descriptions qui s'affichent sont différentes de celle du certificat de licence .(cf capturebug2)
Il na pas bugué au début de l'installation quand j'ai saisi le numero de serie pourtant
"Clients CLP : vous avez accès aux téléchargements pour les licences achetées au moyen de votre identifiant de déploiement, à condition que le logiciel soit disponible sous forme de téléchargement"
De toute façon , ce n'est pas simple du tout dès le début :
1- on a une adresse mail ID Adobe , oui, mais pas de mot de passe
2- j'ai reinitialisé le mot de passe pour en avoir un
3- sur LWS j'ai saisi tout ce qui était demandé dans telechargement
4- j'ai installé le produit
5- première ouverture j'ai dit oui que je voulais enregistrer : il m'a fait modifier le compte (pub, profil)
5- aucune proposition d'activation ensuite
6- des heures passées dans l'aide pour trouver une réponse sans succès
7- j'ai compris qu'il fallait sélectionner le menu aide au lancement de l'application et trouver activer
8- or il n'ya aucun lien activer ou desactiver dans le menu aide : il ya juste "completer le profil d'adobe Id"
9- quand je vais sur le compte, cf les captures que je vous ai envoyées en pj,, j'ai essaye "d'enregistrer de nouveaux produits" vu qu'aucun n'était enregistré: J'ai écris le numero de serie avec les tirets et sans les tirets sans succes : pretend qu'il est invalide (cf capturebug)
Voilà mes manips , qu'ai-je fait de travers pour ne pas pouvoir activer ? je ne veux pas être bloquée dans 7 jours
Merci de bien vouloir m'aider

Hi Sara,
In fact, my acrobat pro XI is an educational one so we don't have to register or activate it
tha't why it doesn't appear in the help menu and on the site. It's a pity that adobe doesn't explain it anywhere in the beginning to avoid long time to search for nothing
If anyone has the same problem don't worry it's normal : install ok - no register and no activate for "licences en volume"
Thank you for your help
have a good day

Force local (Active Directory) Home directory on (non) startup disk

We're starting to experiment with binding our Macs into our corporate Active Directory domain and utilizing our network IDs and password to login (to the Mac). Our Macs are currently configured with three partitions; System (bootable), Restore (bootable) and Storage (empty) with local user accounts. We've worked on different setups utilizing the AD accounts either from the network home or pushed to the startup disk.
What I'd like to do is use the Storage partition as a landing spot for AD home directories that have been forced local. A new user would login with their network ID and password, their network home would be copied to the Storage partition and prefs inherited from the User Template.
Using the AD login should move us off of having to configure local user accounts (useful for freelance staff) and give our end users ONE account ID and password to remember.
Locating the home folder to a separate partition than the startup disk should allow us to perform OS updates (or installs) without worrying (too much) about wiping out the user's home folder. We also no longer have to reinforce directing our users to store files on the Storage partition instead of their Desktop, because the user's Desktop will actually be in the Storage partition.
If anyone has any advice or information to share, I'd greatly appreciate it... thanks!

Managed prefs - changed path of mobile home to second partition.

How is the active user maintained in the internal webserver

Hi,
Does anyone know how the Tomcat server tracks the user that is logged into the localhost web server with MAM?
Does it block other users from accessing its servlets on teh same machine or does it let multiple users access the servlets (i.e. synchronize) simultaneously?

Hello,
For this, I guess you will have to try. I am not sure, but I have the feeling that this will not work...
As for the load, it will not create a big load on the middleware because the MOBILE ID for the user will be the same so the requests will only stack up and be processed one after the other.
To have a real load performance test you would have to create more the one mobile id and to do this you need more than one MI running. You can have more than one instance of MI by playing with the ports in the config files. You can also use the setup package feature in MI 7.0 to create preconfigured and initialy synch MI folder for one or many users. This can be a lot more easy than installing many individual MI and syncing them.
Thank you,
Julien.

How to do authority for vkbur

Hi All,
 I have a request ,need to control the contract create(VA41) throuth sale office.I have done a authority object for vkbur.AND the code is written in MV45AFZZ --USEREXIT_MOVE_FIELD_TO_VBAK
AUTHORITY-CHECK OBJECT 'ZVKBUR'
 ID 'VKBUR' FIELD VBAK-VKBUR.
IF SY-SUBRC <> 0.
message 'You have'not authority to create contrace'.
ENDIF.
Why the code is invalid in contract create : initial screen? AND in the overview screen is valid?
Thanks in advance.

Sorry for confusing.
No need to assign auth object to authorization group .
F1 on authorization group says ...
Maintain table maintenance dialog authorization groups
 The authorization group makes authorization protection possible for the
 extended table maintenance. The authorization groups can be defined
 without constraint. The authorization group occurs always in the
 authorization object S_TABU_DIS in combination with the field activity.
Include S_TABU_DIS into auth profile ( Tcode PFCG) along with possible activity
02 Change
03 Display
BD Maintain obj. in non-OwnerSys.
so this auth group will prevent modification/display by unauthorized user.

S_TABU_DIS; why some authorizations do not offer value 01 (create)?

Hi
I browsed couple of instances of S_TABU_DIS in some of our roles and realized that only few of them offer the value of 01 (create) for the field Activity and majority of them offer only values of 02 (change) and 03 (display) with 01 completely omitted from the list of choices.
I was wondering why.
Thanks
Reza

For a role in our organization I get these values for the Activity field of one of the S_TABU_DIS authorizations:
01 Create or Generate
02 Change
03 Display
BD Maintain obj. in non-OwnerSys.
Within the same role I get these for another S_TABU_DIS authorization:
02 Change
03 Display
BD Maintain obj. in non-OwnerSys.
These two instances have different values in the field of Authorization Group. So why 01 does not appear in the list of Activities in the second S_TABU_DIS instance? Does this depend on the values entered in the Authorization Group field?

How to maintain fields non-editable in MIGO

Hi all.
how to make fields as non editable in the transaction MIGO .
for ex: in MIGO screen there is field serial number. when we click this one it is displaying some serial numbers. For this field need maintain only display (non editable) mode.
if anybody know this pls..reply.
thanq.
sksk

Hi,
I have not come across any transaction as such. I think you need the field VBELN to be in display mode.
You may try the following code in the enhancements;
loop at screen.
if screen-name = 'VBELN'. (or the field of your requirement)
screen-input = 0.
endif.
Modify screen.
endloop.
Make necessary additions according to your requirement.
Regards,
Renjith Michael.

Document Split on Non Leading Ledger

Hi Friends,
Can we activate document split on Non leading Ledgers also?
Actually my client wants to maintain Leading ledger as per US GAAP and Non leading ledgers as per Schedule VI
So there is a requirement of activating document split on the non leading ledgers
Regards,
Ambuj Garg
+91-9739976912

Ok Think I should put my question differently
I have activated document split.....
Leading and Nonleading Ledgers are also in use
Now when i post a document it is split on the basis of Profit Center on the "OL" Leading Ledger view
While in the "NL" it is not split.
Is there a seperate setting for achieving document split in the Nonleading ledgers

Error in Starting Oracle BAM Active Data Cache

I am not able to start "Oracle BAM Active Data Cache" on my machine.
The other two components "Oracle BAM Event Engine" and "Oracle BAM Report Cache" are starting properly.
When I see the event log file of my Computer I could see the details as below:
Event Type: Error
Event Source: Oracle BAM Active Data Cache
Event Category: None
Event ID: 0
Date: 2/7/2007
Time: 3:51:25 PM
User: N/A
Computer: CHNANDA-WXP
Description:
ActiveDataCache: The Oracle BAM Active Data Cache service failed to start. Oracle.BAM.ActiveDataCache.Common.Exceptions.CacheException: ADC Server exception in Startup(). ---> Oracle.DataAccess.Client.OracleException ORA-12541: TNS:no listener at Oracle.DataAccess.Client.OracleException.HandleErrorHelper(Int32 errCode, OracleConnection conn, IntPtr opsErrCtx, OpoSqlValCtx* pOpoSqlValCtx, Object src, String procedure)
at Oracle.DataAccess.Client.OracleConnection.Open()
at Oracle.DataAccess.Client.OracleConnection.Open()
at Oracle.BAM.ActiveDataCache.Kernel.StorageEngine.Oracle.OracleStorageEngine.GetServerVersion()
at Oracle.BAM.ActiveDataCache.Kernel.StorageEngine.Oracle.OracleStorageEngine.Startup(IDictionary oParameters)
at Oracle.BAM.ActiveDataCache.Kernel.Server.DataStoreServer.Startup()
--- End of inner exception stack trace ---
at Oracle.BAM.ActiveDataCache.Kernel.Server.DataStoreServer.Startup()
at Oracle.BAM.ActiveDataCache.Kernel.Server.Server.Startup()
at Oracle.BAM.ActiveDataCache.Service.DataServer.Run()
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Could anyone pls help me?
Thanks and Regards,
Chinmaya Nanda

hi Chinmaya -can yoy tell us your companyname,project ? Your problem is very simple.BAM ADC is notable to reachoracle db.fromyour dos prompt- try tnsping <yrDB> [default is oraclebam or orcl ]/ Also see FAQ pages. there is a requirement on dos prompt setting, with <clientforBAM>as 1st parameter

Activity BD-Maintain obj. in non-OwnerSys

Similar Messages

Maybe you are looking for