Activity pricing (KSPI)

Hi,
I am facing some problem in price calculation (T-code KSPI). As per my understanding price calculated in KSPI is the division of Plan fixed cost entered in KP06 by Plan activity entered in KP26.
(i.e KP06 value /KP26 Value.)
In our case, the value entered in KP06 ( Plan fixed cost )----
Rs 720000
Plan activity entered in KP26 is ......................................................72000
The value showing in KSPI is .......................................................RS. 110
Actual value as per my understanding should be ..........................Rs 10. (720,000 / 72000).
Please explain the Calculation process.
Thanks and Regds
Sridhara K N

You understanding is Ok.
Also check whether the KP06 values is same as the value in report S_ALR_87013611. And also the plan Qty in KP26 is correct.
Activity Price calculation = value in report S_ALR_87013611 / plan Qty in KP26.
Mind it, this KSPI calculation is iterative one. Hence if you had already run the KSPI earlier, it will have its effect.
regards
Kamlesh

Similar Messages

Collective Order Actual Activity Pricing

Hi Gurus
We are using collective orders for production orders. As you know collective processes are used for costing shared processes.
Let me explain the problem with an example: Say, we have product A and B to be produced. These two have shared operations and costs will be collected via collective orders by Tcode mill_oc.
The process is as below:
Production order 1 for product A. - Normal production order - CO01
Production order 2 for product B. - Normal production order - CO01
Production order 3 for product A - Collective production order - mill_oc
Confirmations are done for Order 3 during period. At the end of the period Order 3 is settled to Order 1 and Order 2 with certain proportions.
Actual activity price is calculated via Tcode:KSII. During CKMLCP the system valuates activities (posting price differences) for Order 3 product, Product A only. It must be the case that Product A and Product B have to be revaluated.
NOTE: Actual activity price is valuated in material ledger, rather in orders (not with CON2)
Is there any OSS notes or solution for this problem? If there is huge activity price differences, all the value is posted to just one product, which is collective orders product, rather than both lower level orders' products.
Thanks in advance for your replies.
Ahmet

Hi Ahmet,
This is rather a problem of material ledger multi-level settlement than of activity pricing. Material ledger will pick up the actual activity price correctly and will use the difference against the former activvity price as multi-level price difference on the production process. The problem is, if there are multiple outputs coming out of the process, as is resulting of the order combination process, material ledger will by default search for a apportionment structure (for joint production) in the material master of the main (or original) output material. As nothing will be maintained there, all the differences will go to this material.
You can overcome the situation by a BADI implementation of BADI cost_split. There should be an example implementation in your system (if you have the Mill Products add-on active, as is indicated because you use Mill_oc) that enables to distribute the price differences by quantity of the outputs of a process. If you don't find the example implementation I could provide it to you.
best regards,
Udo

Actual activity pricing - KSII

why do the actual activity pricing is required using Tcode KSII ?

it totally depends on business requirement,
Normally you valuate/absorb overhead on product with plan activity rate and using same rate inventory is valuated.Though for same activity may incurr more actual cost which is not getting reflected in planned rate.
This kind of requirements are handled through actual pricing.In this case using SAP splitting calculate actual rate and revaluate inventories.This will adjust you p/l with this amount.
regards,
ashok

Activating Pricing for Sales Order in Retail

Hi All/Vijay/KK,
Please tell me how activate the pricing for sales order, actually in SD we do Pricing Determination, what has to be done for Retail pricing

Hi,
To do sales order pricing
Goto IMG>Sales & Distribution>Basic Functions>Pricing>Pricing Control
Either Follow Standard, condition type PR00
or in case of Custom
1. Use condition table 406 Site/article
2. Define Access Sequences ZPR0
Enter accesses:10 406 Site/article Exclusive x
3. Define Condition Types (ZPR0 assign newly defined access sequence)
4. Define And Assign Pricing Procedures (assign condition types ZPR0..etc. to it)
Then maintain condition record , go to VK11 --> Enter your Z condition type (eg. ZPR0)., enter the amounts.
Add the pricing procedure , to sales document type.
For Retail Sales Pricing
For Retail Sales Pricing based on Purchase pricing you can follow the following method:
The retail price is always based on the purchase net/net price. This purchase net price is built up from the purchasing pricing elements or condition types defined to be included in the purchase net price. A planned mark-up is applied to the purchase net/net to calculate the proposed retail price. The planned mark-up can be set by merchandise category and for exceptions, more specifically by article.
You can perform Two-step calculation for retail pricing, for example, for stores that are supplied by a distribution center (internal vendor). Calculating sales prices for the stores is based on the transfer price for distribution centers (preceding organizational unit).
1. Set up Master Data (WB02) - Relevant Fields should be maintained
2. Set up Article Master Data - Logistics DC and Store View (MM42)
Relevant Fields should be maintained
3. Maintain Mark up for DC(VK11) -Markup % at Distribution channel distribution chain level
Mark ups maintained at two levels:
For DC: At distribution chain level
Condition type used: AUFS
For Stores: At article level
New condition type ZUFS created.
4. Maintain Mark up for Stores (VK11) Markup % at Store distribution chain level
5 Create Pricing Procedures (IMG) -Pricing Procedures created
6. Carry out Price calculation for DC(VKP5) - Pricing Document created - DC Transfer price calculated
7. Carry out Price calculation for Stores (VKP5) - Pricing Document created - Final Retail Price Calculated
The final retail price that is calculated is stored in the condition type VKP0.
Hope it helps,
Regards,
Anirban Roy

Activity Pricing using DIP

Hi All,
Can someone give solution for the below mentioned scenario
Contract contains fixed billing rates for each activity performed,
I have three activities example
Activity I
Activity II
Activity III
The client wants all three activities to be linked to one service material but the rates should be calculated based on the contract rates for each activity and then summed up.
As for all the activities i have only one material how can i calculate the rates from condition records.
Iam able to link all the three activities to single material by material determination and using activity type as characteristic in DIP.
But iam not able to get the price as iam having single material and loosing the activity types in the process. If iam using different material for each activity type then iam able to get the rates from condition records based on materials.
anybody has solution for this as this is the scenario of construction project.
Thanks
Ishaq

Ishaq,
I see that RKE_WWCH4 (Network activity) is available for selection from KOMP. Is this the field you are looking for? Assuming it is, you could then add it as field for selection and take a shot at creating a condition table. Please advise if this is what you are looking for? If not, give further details and revert back.
Thanks,
Jay

Customer order actual activity report

Dear experts,
I am using make to order strategy and I have a multilevel BOM structure. I am following some semi-finished products individually for customer order and some for make to stock. I need a report to see the actual activity confirmations for a single customer order including all the activities of semi-finished products in BOM. For your help please.

Hi Ahmet,
This is rather a problem of material ledger multi-level settlement than of activity pricing. Material ledger will pick up the actual activity price correctly and will use the difference against the former activvity price as multi-level price difference on the production process. The problem is, if there are multiple outputs coming out of the process, as is resulting of the order combination process, material ledger will by default search for a apportionment structure (for joint production) in the material master of the main (or original) output material. As nothing will be maintained there, all the differences will go to this material.
You can overcome the situation by a BADI implementation of BADI cost_split. There should be an example implementation in your system (if you have the Mill Products add-on active, as is indicated because you use Mill_oc) that enables to distribute the price differences by quantity of the outputs of a process. If you don't find the example implementation I could provide it to you.
best regards,
Udo

Export Pricing Conditions - Excel

Hi,
How to export the active pricing conditions that have set up into Excel.
Thanks.

Hi
Go to V/LD
Choose the type of condition type you want, Ex: Material prices, discount, taxes
Next screen enter the inputs, sales org, material, customer related inputs > Execute
Display all condition types
from the mail menu choose list and select save > file > choose spread sheet
hopes its usefull
regards
Satish

Activity Type in SAP PM

Dear Masters,
We have a field in order screen "PMActivType" can anybody explain me what is it used for and what is it necessary to define PMactivity types in configuration?
Thanks in advance.

Hi,
Activity types are used to calculate the Internal Labor cost based on the Planned hours & Actual hours. In the Maintenance Order, Planned labor hours for Internal Operation will be maintained in Operation tab.
Activity Pricing will be done by FICO people in KP26, for the activity types against cost center. For example, there are electricians, mechanics & technicians.
For those people, based on their salary (in case of permanant employee of the company) or hour basis (in case of contract employee), these pricing will be done.
For Electricians, Per hour charge would be 10 INR.
For Mechanics, per hour charge would be 8 INR.
Work centers would have been created for these people. In the costing tab of work center, activity types & cost centers will be assigned. For these activity types & cost center combination, pricing will be done in KP26.
In Maintenance Order, based on operation type, work centers will be assigned.
For Example
In the order, first operation will be done by Mechanics. Second operation will be done by Electricians, again 3rd operation will be done by Maechanics.
Based on that work center selection in operations, activity types will be assigned. For the activity type & cost center in work center, we have defined the price in KP 26 already.
For first operation, work hour is 3 hrs. So planned cost would be 24 INR (3 hrs * 8 INR / hr)
For second operation, work hour is 5, so planned cost would be 50 INR.
For 3rd operation, same calculation based on the hours in operation & cost.
Once you do confirmation, actual cost will be calculated in the same way.
I hope this will be clear.
Regards,
Maheswaran.

KP26 activity type / price planning

Hi ,
After giving cost center , activity type , fiscal year and period ,
1) How system automatically proposes plan activity , capacity , Priced fixed etc values ? From where it gets data ?
2)How values entered in plan activity , capacity , fixed price , variable price , price unit , plan price indicator etc affect /calculate activity cost ?
I know SAP help is available , If some one can explain with examples it would be great help .
Let us say I have work center WKCN and I have maintained capacity , scheduling and costing tab . I have maintained plan activity as 102 , capacity as 108 , price fixed as 80 , price unit as 00001 ....Please explain how the next chain of events happen .
NP

In KP26, activity pricing will done for the combination of labor cost center & activity type assigned in work center. Here activity price will be maintained on hour basis or day basis.
In task list or order, work hours will be given for the internal activity. Here for the internal operations, work center & activity type will be defined.
If work hours is 15 hrs & fixed price is 80 INR (as per your example), the total activity cost will be 1200 INR for order (15 x 80).
Price Unit
The price unit is 10 for activity type "Drilling" with unit "Hours".
The price applies to 10 hours of drilling.
The price unit is 1 for activity type "Drilling" with unit "Hours".
The price applies to 1 hours of drilling.
Plan Price Indicator
001:
The price of the activity type is determined automatically based on the planned activity and the planned costs required for this plan activity quantity.
002:
The variable portion of the price is calculated based on the plan activity quantity. To determine the fixed portion, the system uses the capacity and not the plan activity quantity.

Store charges activation....

Local BestBuy store charging activation but when I click the Bestbuy add online there is no activation.
The local Bestbuy sales help tell me they cannot match Bestbuy online activation pricing.
I do not understand, the BestBuy add I click online is the same in store add?
BTW calling online order help is horrid due to the language barrier.
Questions like temp numbers and 30 day satisfaction guarantee seem to be unheard of.
Solved!
Go to Solution.

BoBinDE -
Welcome to the Forums!
I'm sorry to hear about the confusion regarding activation fees, but let me try to help out.
Best Buy, in general, actually does not charge activation fees at all. The carrier themselves (be it AT&T, T-Mobile, Verizon or Sprint) do charge activation fees ($35 or $36 depending on the carrier), but they would appear on your first bill from the carrier. The store agents do not have the authority to go in and alter the account to waive these fees
Now, if you opt to ordering the phone online or over the phone with a contract, bear in mind that the orders go through a partner company called Simplexity. They have completely different systems than the stores do. When it comes to the activation fee being waived, the carriers have contracts with Simplexity recognizing that these fees should be waived within certain promotional periods.
Hopefully this helps clarify the issue!
Miranda
Don't take what I say as being absolute. There's always room for improvement.

Activity Price-KP26

Hello,
Our business scenario is that activity rates for particular day(first 3 days ) is Rs500. & for next each day Rs.100.Is it possible to do activity pricing in such a way.
Than & regards

Hi
The simple solution is Create two different ativites. One with Price; 500 and anothrt with Price:100.
I am thinking about some auotomatic solution to this Problem. I will get back to you if somrthing strikes in my mind.
Thanks
Prasad

Issue in Free Goods - I.C(TANN)

Dear all,
I have an issue while creating Free Goods.
For the free goods item(TANN), the net price should not be there.when I create an order for Free Goods,net price is there.
What is the cause for this?
Thanks in Advance
Regards
Balaji

please check the item category (TANN) settings at VOV7, have u activated pricing . It should not be relevant for pricing. the setting must be set as B.
Also please check in the pricing procedure, the condition type R100 requirement is properly assigned and satisfied?
Please try and let me know. any further queries are welcomable
Do reward points if u find this as useful

IPhone 6 FAQ

This FAQ is dynamic and will be updated frequently as information becomes available
In order to subscribe to the RSS feed for this FAQ click on the Topic Options drop-down above
Which models of the Apple iPhone will Best Buy carry?
Best Buy will carry all models of Apple's new iPhone 6, and iPhone 6 Plus
On what carriers will the Apple iPhone 6 be available?
Best Buy offers customers choice in plans, whether it’s a two-year plan or new monthly installment billing options from AT&T, Sprint or Verizon Wireless.
When will I be able to purchase the iPhone 6 and iPhone 6 Plus from Best Buy?
The new iPhones will be available for purchase at Best Buy on Friday September 19, 2014. Initial availability may be limited to pre-orders.
Will all stores carry the new iPhones?
Yes, but keep in mind that not all stores will carry every model.
Are all stores receiving product for launch day?
Specific product model availability and quantities will vary by store.
Will the iPhones be available on BestBuy.com?
Yes. Keep in mind that availability of specific models can vary greatly on BestBuy.com
UPDATE 9/11: Not immediately, pre-orders will only be available in Best Buy and Best Buy Mobile stores.
UPDATE 9/24: We are now accepting orders on BestBuy.com for many of the iPhone 6 models.
What will the prices be for the iPhones?
Pricing at launch for the iPhone 6:
$199 for the iPhone 6 16GB with two-year activation
$299 for the iPhone 6 64GB with two-year activation
$399 for the iPhone 6 128GB with two-year activation
Pricing at launch for the iPhone 6 Plus:
$299 for the iPhone 6 Plus 16GB with two-year activation
$399 for the iPhone 6 Plus 64GB with two-year activation
$499 for the iPhone 6 Plus 128GB with two year activation
What time are Best Buy opening for iPhone launch?
Most stores will open at 8 a.m. local time on Friday, Sept. 19, 2014.
Can I Pre-order the iPhone 6?
You should be able to pre-order the iPhone 6 on Friday September 12, 2014 at Best Buy stores, Best Buy Mobile stores, and BestBuy.com. A $50 deposit is required for in-store pre-order, applicable to purchase price. Full purchase amount is required for online pre-order. Carriers, coverage and products may vary by store. Pre-orders are limited to one per customer.
UPDATE 9/11: Pre-orders will only be available in Best Buy and Best Buy Mobile stores.
UPDATE 9/11: Pre-orders are not available for the iPhone 6 Plus.
UPDATE 9/12: We are offering pre-orders on BestBuy.com for 3 select Sprint iPhone 6's found here.
UPDATE 9/23: Pre-orders for select iPhone 6 Plus phones can now be placed in our stores.
UPDATE 9/24: We are now accepting orders on BestBuy.com for many of the iPhone 6 models.
UPDATE 9/29: As of Sunday 9/28/2014 our stores are no longer taking pre-orders for the iPhone 6 Plus.
When can customers expect to receive a pre-ordered iPhone?
Pre-orders for the iPhone 6 will be fulfilled as inventory arrives in stores.
What new iPhone accessories will Best Buy have for purchase?
In addition to the phones, Best Buy will have one of the largest selections of iPhone accessories including cases, screen shields and power solutions available on launch day.
Can customers use the Best Buy Trade-In program to get a new iPhone?
Customers can take advantage of the Best Buy Trade-In program to get a Best Buy gift card instantly for their used mobile phone. Customers who Trade-In any working iPhone 5s will receive guaranteed minimum Trade-In value of $300 and customers trading in any working iPhone 4s will receive guaranteed minimum Trade-In value of $125. The guaranteed Trade-In offer will be available Sept. 19 – 27, 2014 with activation on a two-year or monthly installment billing plan.
UPDATE 9/11: The trade-in promotion is only available for iPhone 5s and 4s trade-ins. You can trade in your iPhone 5, but it will be for whatever trade-in value we offer at the time of trade-in.
Are there any other promotions?
Yes, a customer purchasing an iPhone can receive 20% off Beats Headphones or Speakers
When will Best Buy stores receive additional inventory?
Specific product model availability and quantities vary by store. Stores will continue to receive shipments of inventory on an ongoing basis. Customers can check with their local stores and BestBuy.com for updates on product availability.
Can I have the iPhone 6 I order on BestBuy.com shipped to my home?
No. Orders for the iPhone 6, placed on BestBuy.com, can only be picked up in a Best Buy store.
UPDATE 9/11: iPhone 6 pre-orders will only be available for pick-up in the Best Buy or Best Buy Mobile store where you placed your pre-order.
UPDATE 9/12: Pre-orders placed on BestBuy.com for the three Sprint iPhones available will be shipped directly to your home.
UPDATE 11/10: We are now accepting orders on BestBuy.com for a number of iPhone 6 plus models that can be shipped directly to a customer’s home.
Will my local store have live display units on launch day?
We will have live display iPhone 6 units in our stores on launch day. We will not have live display iPhone 6 Plus units in every store on launch day.
How will inventory, that is not being held for pre-orders, be handled on Friday September 19th?
Tickets will be given out to people in line the morning of the 19th on a first come, first serve basis. It will be one ticket per customer. (A customer cannot ask for four tickets to upgrade four phones, there MUST be four people there. If extra phones are available, then they can purchase, but they will receive only ONE ticket). A customer, with a ticket, has two hours from the time the store opens to purchase the phone.
I never received a notification that my iPhone 6 is ready to be picked up, even though I pre-ordered it?
If you haven't received notification that your iPhone 6 is ready to be picked up it means the store didn't receive enough of the model you pre-ordered to fulfill you pre-order at this time, or they haven't physically reserved your pre-order yet with the inventory they did receive.
When will the iPhone 6 Plus be back in stock?
We can't really say when we will have inventory of the iPhone 6 Plus, but you can now pre-order select iPhone 6 Plus phones in our stores.
UPDATE 9/29: As of Sunday 9/28/2014 we are no longer accepting pre-orders for the iPhone 6 Plus.
UPDATE 11/10: We are now accepting orders on BestBuy.com for a number of iPhone 6 plus models that can be shipped directly to a customer’s home.
This FAQ thread is intended for questions regarding the iPhone 6 release. Please do not post complaints.
For additional information as it becomes available, stay tuned to www.BestBuy.com/iPhone6.
Allan|Senior Social Media Specialist | Best Buy® Corporate
Private Message

christ....they JUST unveiled the phone. at least wait until tomorrow to ask that question. you people are so impatient.
I am a member of leadership at a Best Buy store. I deal directly with the Customer Service aspect of the business. Customer satisfaction is my #1 priority. All posts are my own opinion and do not reflect the official views of Best Buy, unless otherwise stated.

Free Goods price

I copied item category TANN to ZTAN ... everything is the same in item category details.. But when I created invoice, price is required for ZTAN.. when i use TANN, pricing is not required in the invoice.
Let me know what else is missing in my configuration for ZTAN? It should not require pricing in invoice since these are free goods.
thank you

HI
Kindly check the below settings
In the item category configuration VOV7
Item Type                                        tick   Business Item
Completion Rule                               tick   Sched.Line Allowed
Special Stock                                            Item Relev.for Dlv
Billing Relevance    A                                Returns
Billing plan type                               tick    Wght/Vol.Relevant
Billing Block                                     tick   Credit active
Pricing                                             tick    Determine Cost
Statistical value
Revenue Recognition
Delimit. Start Date
IN Copy control configuration VTFL
                                                                                Target Bill. Type F2                    From Delivery Type LF
                    Invoice                                  Outbound Delivery
Item Category      ZTAN
                                                             Free of Charge Item
Copying requirements   004 Deliv-related item          Billing quantity     B
Data VBRK/VBRP         000                                        Pos./neg. quantity   +
Pricing type         G
PricingExchRate type
Cumulate cost
Price source
check the above settings in your system
REgards
Damu

Cost of QC sample on Process Order

When we are posting GR of our Finished or semi finished goods an inspection lot will be created. when we take the Usage Decision on this lot and took samples from the total and post the remaining quantity in unrestricted. the cost will be charged on Process order, which is wrong. we want that the cost should be charged on a QC cost center. when we take Usage Decision on raw and packing material the it always ask for the cost center and the cost is charged on that cost center. in case of finished and semi finished it is not asking. and if we forced it to a cost center it always charged it to a process order.
1. explain me that charging of qc cost or sample cost on process order is standard?
2. what could be the solution of this problem?
3. what could be the work around of this?
Do participate points are guaranteed on value added input.........

Hi Syed ,
In that case what I can think of is introduce a new operation as quality inspection in routing & then implemenent activity as activity cost for the same . Now confirm the operation & there you can capture the time spend in quality & translate that in amount through the activity pricing ......
But in this also it will have effect in the order cost but you can differrentaiate the amount spend in mfg & amount in quality seperately...........
Thanks
Kaushik

Activity pricing (KSPI)

Similar Messages

Maybe you are looking for