AD new user not populated in OID

Hi,
When I create a new user in AD, it is not getting populated in OID. Though when I modify some attrubutes for the existing user, it gets sync with OID.
What am I missing?
ActiveChgImp is the only profile which is enabled.

1) Check that the new user created in AD is in the containers to be SYNC to OID, the mapping rules are defined in the session of DomainRules in ActiveChgImp.map file. This may be the cause, it happened to us two years ago.
2) check log file at $ORACLE_HOME/ldap/odi/log/ActiveChgImp.trc + ActiveChgImp.aud

Similar Messages

Users not populated into OID from 11i

Hi,
I set up bidirectional integration between OID and 11i. No error and successfully.
The user be created in OID automaticlly populated into 11i.
But, somehow, the user created in 11i is NOT in OID. No any error in oid debug.
The profile 'Applications SSO Enable OID Identity Add Event" is enable.
Anything I have to set it up? how I can trace the event?
Thanks
Paul

2.11 Users created in E-Business Suite not propagated to OID
* Is E-Business Suite set to propagate users to OID?
How To Verify profiles APPS_SSO_IDENTITY and APPS_LDAP_SYNC
If Not See profiles related to Synchronization
* Do the relevant WorkFlow events get created?
How To 5.3.5 Listing Workflow events
If Not 2.19 WF events are not created
* Do the events still exist in WF_ENTITY_CHANGES?
How To WF Pending Events
* Is OIDSRV running?
How To 5.7 ODISRV
If Not See 5.8.1 Start ODISRV
* Does the provisioning profile AppsToOID exist?
How To Look for the cn=AppsToOID in 6.12 List Provisioning Profiles
If Not Proceed to 4.2 Cannot add/remove provisioning profile template 6.14 Reregister the Instance in OID
* Is the provisioning profile AppsToOID enabled?
How To Look for orclstatus and orclsubscriberdisable attributes at 6.12 List Provisioning Profiles
6.12 List Provisioning Profiles
If Not 6.13 Enable/Disable Provisioning Profiles
* Is the last status Event Propagation Successful for the AppsToOID provisioning profile?
How To Follow the steps in 6.12 List Provisioning Profiles.
Check orclodipprofileprocessingstatus, orclodipprofilelastprocessingtime, and orclodipprofilelastappliedappeventid (Apps->OID).
If Not Verify the error shown in the orclODIPProfileProcessingErrors attribute. Most errors are self-explanatory
ODIException: ODI Exception in Filter Processing: ODIException: GUID Not Found in Directory..Fatal Error.. Missing entry at OID, check the AppDN, RealDB and user orclguid.
DIP_DB_ERROR_CONN ODIException: DIP_DB_ERROR_CONN Error trying to connect to database, review that hostname, sid and port are valid. Validate that hostname is valid from the OracleAS 10g host
As of today, no reports have been filed with successful status and failed provisioning from Apps to OID. If this is the case, provide Oracle Support with:
* ODISRV logs generated with debug=2047, see 5.7 ODISRV
* Listener logs, database logs or OID logs (see extensive logs), depending on the exact error.
extensive logs), depending on the exact error.

New Users Not Appearing On Login List - Help!

Hello Mac geniuses,
I run a 10.3.9 network in an elementary school, and I since returning from summer vacation I have had problems with many of my client eMacs not displaying the names of users I have added in WGM. These eMacs are also still displaying the names of accounts I have deleted.
If anyone is kind enough to help a stranger, I have copied below the transcripts of my email exchanges with an Apple tech, in my struggle to get my school functioning again. (I have placed them in the correct order so the 1st email is on top and the last on bottom. The tech's name is John and I am using "Jon" to make it slightly less confusing!).
My very grateful thanks in advance to anyone who can help me.
Jon
On Sep 5, 2006, at 3:28 PM, Jon T wrote:
Hi John,
After deleting and adding users in WGM, some login screens still show deleted users and do not display the new users.
I tried deleting the MCX cache via NetInfoManager on the clients, and even restarted the server, but it has not affected several machines.
Any advice?
Server: Dual 1Ghz G4 (Mirror Door) running Panther Server 10.3.9
Clients: eMacs running 10.3.9
Thanks in advance.
On Sep 5, 2006, at 3:47 PM, John G wrote:
Jon,
Go into the client as the admin account.
Delete /Library/Preferences/Directory Service
Restart and setup Directory Access in Utilities
Let me know if that works.
John
On Sep 6, 2006, at 9:08 AM, Jon T wrote:
Hi John,
Thanks for replying. unfortunately, that didn't work either . . .
Jon
On Sep 6, 2006, at 2:03 PM, John G wrote:
Jon,
Are you sure the machine is on the network and talking to your
server?
Go into Dir Access and uncheck LDAP and readd the server.
On Sep 6, 2006, at 4:07 PM, Jon T wrote:
Hi John,
Yeah, they're on the network, students can log in using the "Other" option, I can connect to the server and mount shared folders, etc.
I did as you said, rebooted, still no updated list.
Jon
On Sep 6, 2006, at 8:57 PM, John G wrote:
Jon,
Netinfo is probably corrupt.
Follow these directions to blow out Netinfo to create a new one.
Bind back to server.
<OS X frozen while booting.pdf>:
AFP548.com: Articles: NetInfo Recovery Techniques
NetInfo Recovery Techniques
Joel Rennich, [email protected]
4 June 2002
When working with NetInfo, which we are and hope to have some more articles on in the near future, it is important to know
how to back up to a previous version of your database.
1. First, the most brutal way of recovering from a nonfunctional database.
Boot into single user mode by holding down the "s" key while starting up. Follow the handy instructions Apple gives you at the end of the startup sequence and run fsck. Then mount the system root disk as read/write with:
mount -uw /
Now you can get on with recreating your database in a very brutal way. Remove your current database with:
rm -rf /var/db/netinfo/local.nidb
Now remove the file that prevents the Setup Assistant from running:
m /var/db/.AppleSetupDone
And now reboot to get things rolling.
reboot
This will cause the Setup Assistant to launch, complete with music and bouncing blue blobs. If you remember which account you set up first when you last saw this screen, set up that account now. Otherwise, go with whatever you want for your first
Administrator account. If you match it up with the original Administrator account, all of your permissions should be groovy.
Otherwise, get familiar with chown and chmod and you will be able to set things right.
The above method is rather draconian and isn't for times when you need to replace a complicated NetInfo setup, but should work perfectly well for an essentially single user machine. However that probably rules out most Servers.
On Sep 7, 2006, at 8:15 AM, Jon T wrote:
Hi John,
I performed that protocol, but even that didn't fix the problem!
I know I've heard someone once suggest (in a moment of resignation) that I just use the blank name and password fields at login, but this is not really an option in elementary school. I only have 478 users in WGM, so I can't believe that would be too taxing for OS X Server!
Thanks again for your thoughts on this.
Regards,
Jon
On Sep 7, 2006, at 9:53 PM, John G wrote:
Jon,
The last resort is to reimage.
Are you managing computers by Guest computers or
computer groups?
John, we're talking about 23 computers here - re-imaging is not an option for me alone unless I have some technical assistance (I don't know how to 'ghost' images across a network).
I was managing the users by Groups though I did have a list of the computers called "lab computers". I just noticed that when I try accessing the Computers tab in WGM (whether on my teacher's station or on the server itself) I get the same error message:
Got Unexpected Errror
Error of type -14136 on line 432 of
ComputerListPluginView.mm
Please advise!
Thank you again,
Jon

The list of users is a plist file and should be at at /Library/Preferences/com.apple.loginwindow.plist on the clients. See this thread for more information:
http://discussions.apple.com/thread.jspa?messageID=2368769&#2368769
If you've got a good plist from a client that sees the right users, you should be able to copy it over. If not, try backing up the file from one client and then deleting it and restarting.

New users not showing up while trying to set folder permission settings

Server 2012
This is a new virtual domain server and file server in a starwind cluster, I just started migrating users last week.
This last weekend (two days ago) the cluster crashed while doing windows updates on this server. I have been unable to get it to download any updates since without crashing, not sure if that is related to this issue somehow.
I added some new users today and got them all logged in and their data transferred over. good. But then I went to this shared folder that everyone has a mapped drive too and tried to add them in the security tab of a sub folder but their accounts will not show
up when I search for them. Any account I added previously to last weekend show up, students, mine, etc.
even if I select the exact OU the accounts are located in, even if I type their whole name and domain. In AD the accounts are there.
If I log into the backup domain controller Their accounts show up there while in a folder security settings tab. They are listed in active directory on both domain controllers.
I have exhausted myself on Google search.
What the heck did I break?
Maybe I should run
DISM.exe /Online /Cleanup-image /Restorehealth
Not sure if I will lose any data doing that or what the repercussions would be..

Hi Dustin,
If the DC is having USN rollback issue, we can resolve it by demote then re-promote or restore the DC using a supported method such as using System State backup to restore.
More information for you:
USN Rollback, Virtualized DCs and improvements on Windows Server 2012
http://blogs.technet.com/b/reference_point/archive/2012/12/10/usn-rollback-virtualized-dcs-and-improvements-on-windows-server-2012.aspx
Best Regards,
Amy
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

New user not authenticating, can't change/use root access

I have a two-fold problem.
First, I'm am unable to add any new users to my standalone server. Actually, I can add them but they won't authenticate. Am using File Services, AFP and SMB, and Web services for sharing iCals. No home directories, no NetBoot, no Open Directory Master, local users only. Pretty simple setup.
Second issue, which I'm thinking might be related, is that I have no System Admin (root) access to the server. I do have admin access to local directory. Tried to set root access starting up from OS DVD and it seemed to "take" but after restarting, Xserve does not recognize the newly set password (or the old one for that matter.)
Any ideas?

I have a two-fold problem.
First, I'm am unable to add any new users to my standalone server. Actually, I can add them but they won't authenticate. Am using File Services, AFP and SMB, and Web services for sharing iCals. No home directories, no NetBoot, no Open Directory Master, local users only. Pretty simple setup.
Second issue, which I'm thinking might be related, is that I have no System Admin (root) access to the server. I do have admin access to local directory. Tried to set root access starting up from OS DVD and it seemed to "take" but after restarting, Xserve does not recognize the newly set password (or the old one for that matter.)
Any ideas?

NSM 3.1.1, New users not managed.

When new users are added to a context with a User Home Folder policy the new users are unmanaged.
This is a new 3.1.1.15 install. If I right-click the user and select User Actions -> Manage it will create the storage and set the rights per the policy.
What am I missing?
Thanks,
David.

So it was a simple over-site ( read as a dumb mistake ) the Event Servers and Agent Servers on the Configure tab were not Authorized...
Thanks for your help,
David.
Originally Posted by dbenjamin
# ls /var/opt/novell/storagemanager/event/data/
.cacheindex
I then stop the engine.
Create a new user using iManager.
# ls /var/opt/novell/storagemanager/event/data/
.cacheindex event.dat
I start the engine.
Wait a little bit, a minute or less.
# ls /var/opt/novell/storagemanager/event/data/
.cacheindex
Log into Novell Storage Manager Admin 3.1.1.15
Select Storage Management
Select the container that has the new user
Click the check by Users to see the new user
Right click the user and select Object Properties
Properties tab:
-FDN CN=testuser,OU=Students,O=TreeName
-GUID {big long guid here}
-Type 1
-Create Time Friday, August 8, 2014 8:19:54 AM
Effective Policies tab:
-Effective Policy Students
-Policy Type User
-Managed Path Type Home Folder
-Managed Path <blank>
Associated Polices tab:
-Policy Students
-Policy Type User
-Managed Path Type Home Folder
Transactions tab:
-Eligible <blank>
-Deferred <blank>
-Active Error, Unable to service the request at this time.
History tab:
-FDN History, Name; Error Processing Results - 1792: The requested record could not be located in the Global Statistics Reporting database. Date / Time; Not available
I run the Consistency Check and the Management Status is Not Managed.

Creating a new user (not database) in an E Business Suite application

Hi
My company has an old test application that we cant get into at the minute as we dont have any credentials to do so.
Does anyone know how to create a new user?
also does anyone know how to change the password of an existing user?
Thanks in advance

Hi;
Please check admin guide for can see how you can create new user&change password.
For r12.1.1:
http://download.oracle.com/docs/cd/B53825_01/current/html/docset.html
For r12:
http://download.oracle.com/docs/cd/B40089_10/current/html/docset.html
For r11:
http://download.oracle.com/docs/cd/A60725_05/r11_doc.htm
Also see:
https://forums.oracle.com/forums/thread.jspa?forumID=39&threadID=894815&messageID=4019230
Regard
Helios

New User not creating properly.

Mac mini(mid 2010), running Mavericks 10.9.5. I am trying to create a new user, and have tried several times with out success . Once created I shut down and restart logging on as that user the initial set up screens run Apple ID then set up but when the desktop appears I am left with a non working user interface, No Ikons in the Dock, or sometimes no dock and a flashing screen changing from grey to desktop picture. I have deleted the User in system preferences with a secure erase and tired to recreate. Each time I get the same thing or a variant of it.
Any help would be greatly appreciated.

Do a backup. Boot to the Recovery Volume (command - R on a restart or hold down the option key during a restart and select Recovery Volume). Run Disk Utility Verify/Repair and Repair Permissions until you get no errors. Then re-install the OS.
OS X Recovery
OS X Recovery (2)

New user not logging in

I just tried to add my daughter as a user on my computer. It's not the first time I've done it, but on a different computer. I log out, log her in, and then I just get the little blue dot in the upper right corner and it won't go any further. Suggestions?
iMac G5 Mac OS X (10.4.4) also have a G4 eMac and a G3 Powerbook

Just letting you know that you are not alone. We have also had many times where the login account is ok and working fine and then we get the blue screen of death and the little spotlight magnifier showing in the upper right corner. Very frustrating. The main account never seems to be affected. To get around this, you can create multiple accounts. Eventually one of them will let you login. But be aware of the blue screen eventually.
G5 and many others Mac OS X (10.4.7)

How can i create a new user in OID DIT tree programmatically ?

Dear All,
How can i create a new user object in the OID DIT tree programmatically ?
any help will be appreciated.
Regards,
Mohammed Amin

Dear Eng. Jaime..
Thank you so much for replay...
Can yon explain
Do you want to create a contact in Jabber?
Do you want to enable Jabber for a user?
And what you meant last question..

New Users can't access mail, "Access" granted but still not working! Help!

I am running snow leopard 10.6.6 and I am having an issue where new users cannot log onto their mail accounts from programs nor the web. Though their mailboxes are set up and recieving email just fine. There logins work everywhere else (wiki, blogs, workstations), but when trying to login to mail they get that the username or password is incorrect.
This does not affect the admin. And we have enabled access in the services area of server admin as well as restarted the server. Any other help? I searched and saw that solution but no others. Any help?
It's running on a Mac mini server

Ok I always like to close out my posts. For my new users not being able to login for Mail. The issue with the IMAP with mail clients was resolved by a repair of disk permissions & a restart. Not sure what happened there 100%. But saw that tip in another thread.
Post that, I was still unable to log into webmail for users. They were getting an error:
ERROR Error connecting to IMAP server: localhost. 61 : Connection refused
This was caused by the fact that i set IMAP to REQUIRE SSL, but for some reason Squirrel Mail did not reconfigure itself to match those settings. So to do that, you have to use terminal to put up an admin for Squirrelmail.
Enter
sudo /usr/share/squirrelmail/config/conf.pl
this pulls up an easy config menu for Squirrel mail. I needed to change two things, under SERVER SETTINGS, then UPDATE IMAP SETTINGS, then you have to change both IMAP PORT to 993 and SECURE IMAP to YES. Save and Quit ad you are up and running.
Hope this helps the next person!

New OID users not showing up in Outlook

Hello,
When I create a new user in OID the user does not show up in the Oracle-Global Address List on a particular machine. The user does show up in the web client and if I configure outlook on another machine with the same user info I can then see the new user. Does anyone know why machine 1 is not getting the new user info?
Thanks

Outlook caches the GAL entries, so you might need to download (refresh) your address book. In Outlook 2002, this is done by:
Tools -> Send/Recieve -> Download Address Book.
Depending on your settings, Outlook may get a new address book every time it starts up. This can be configured by:
Tools -> Options -> 0racle Connector -> Calendar:
check "Automatically refresh the GAL when working online".

Users not provisioned from OIM to OID groups

I've created an Access policy such that when i create a user with role as consultant he is automatically provisioned to OID resource and OID group( cn=group1,cn=groups,dc=ad,dc=company,dc=com ).
The user is provisioned to OID users(cn=users) but not to cn=group1,cn=group....
What could be wrong?
i have run the OID group lookup tasks to generate freshly added group lookups. Theses lookups are populated in process form when i create an access policy.
For ex the lookup generated is cn=group1,cn=group,dc=ad,dc=company,dc=com and the decode value is group1
The user profile and process form are not linked. That means changes in process form are not reflected to user profile. Can this be possible reason for the hassle defined above
please help me resolve this issue.
Edited by: Chhavi Saluja on Feb 15, 2010 1:30 AM

Hi,
Today I have also done the same thing of auto provisioning of OID through access policy. Only difference is that for selecting "Container DN" and "User group" we have created two user defined fields(lookup)in the user form which will refer to the lookups "Lookup.OID.Organization" and "Lookup.OID.Group" for inputs.These lookups are already reconciled once from OID.
As far as "container DN" iam successful but while selecting "user group" iam able to select and when i click on "create user" user is getting provisioned to OID into Container DN i specified.But user is not going into that particular group i specified.Iam assuming the reason is that as User Group is a mutivalued attribute and if we observe the process form of group selection we will see the add button. But on user form we dont have the option of child form to ADD/REMOVE the groups.
Someone pls suggest how to proceed further on this.How do i push the user into particular group/groups from the create user form itself?

New users are not updated in Outlook address book (Offline)

Hi All,
We are having an Exchange 2010 environment. from few weeks we are experiencing this issue. When we create new user or change the name of a existing user, it is not updated in outlook address book. Can anyone help me to sort this issue?.
Regs,
Sachitha.

What is the Outlook client you are using? Is it 2003 or 2007+
You are right, you don;t have to update the OAB manually, the kind of issue you are facing is very know (As far as I experienced). After you update the OAB manually, check the issue and it should be fine.
After that create a Test User and check in Outlook if you see it populated.
Cheers,
Gulab Prasad
Technology Consultant
Blog:
http://www.exchangeranger.com    Twitter:
  LinkedIn:
   Check out CodeTwo’s tools for Exchange admins
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

Value is not populated for new field in RSA7 from PI Interface

Hello Experts -
We have 3.5 bw and PI 7.x. we have a PI interface in bw working in production and now we enhanced the interface with a new added field. I mapped the new field in transfer rule/ modified update rules/ods and regenerated the soap datasource in bw. The user has uploaded the file in FTP with this new field added. PI picked the file processed and the value for new field got populated and pushed the data to BW. In RSA7, i dont see the data filled in for this new added field.
Not sure, if i missed any steps, in BW, so that I can populate the value for this field.
Thanks for any inputs/comments.

Hi ,
Replicate the Data source in BI and activate it using RS_DATASOURCE_ACTIVATE_ALL program.
Regards,
Ramnaresh.P.
Edited by: ramnaresh porana on Apr 26, 2011 9:43 PM

AD new user not populated in OID

Similar Messages

Maybe you are looking for