Add java system on another SLD

Hi,
I would like to add a sap portal (JAVA) System to solution manager sld. I did add abap system correcet on sld, But when I go to sld -> Home-> Technical Systems -> New Technical System -> And choos Web As Java. . I can just choos Abap and not Java.
Any help.
Regards

Hi Sunny,
Thanks for reply.
My Sap portal (Java) already points on my PI SLD.
Is it posible to add a sap portal or a SAP java applican server to solman SLD on Technical Systems part as we do for abap applican server?
Thanks

Similar Messages

In SLD WEB AS JAVA systems

hi,
I had a small query that for WEB AS ABAP we use application systems like APO,SCM etc
but for WEB AS JAVA . which application systems are used ?
regards
guna

Hello Guna,
WEB AS JAVA . which application systems are used ?
Web AS Java systems) automatically report information to the SLD about the elements that they contain by using the SLD data supplier programs. You need to manually register the following types of system only:
· Standalone Java systems
· Third-party systems
To manually register these systems and if you want to maintain additional data about automatically registered systems you use the technical system browser.
WEB AS JAVA . which application systems are used ?
Database Only as Data Source
Description: All user, user account, role, and group data is stored in the database of the SAP Web Application Server Java.
Use case: You can use this scenario if UME is only used by dedicated Java applications that do not need to connect to ABAP systems or third-party systems. An example is a Web Application Server Java that is used as a developer workplace for small desktop development
Configuration file: dataSourceConfiguration_database_only.xml
Thanks,
Satya

SLD Communication between Remote ABAP & JAVA system through WebDispatcher

Hi All,
We are having the listed requirement at one of my Client.
We want to register Remote ABAP system into Remote SLD of JAVA system. Both SAP systems are located in different regions.The SLD is local to the remote JAVA system. The ultimate objective is to create JCO Destinations in Remote JAVA system using the Entries of its Local SLD and to run some WebDynpro Application to access Data from Remote ABAP system.
We have already setup the above mentioned same scenario between Remote ABAP Dev and Remote Poratl DEV systems with the help of their Direct Live IP communciation. The setup is working fine, as both systems are accessing each other using Direct Live IPs in both directions on ports 3200, 3300, 50000....
But in Portal PRD scenario, the Cleint's Enterprise Portal is accessed through SAP Webdispatcher. The User Access Request of PRD Portal is first captured at SAP Webdispatcher and then the requrest is redirected to the J2ee Application Servers based on Load balancing. So in this PRD scenario, how we can establish such SLD communication setup between Remote ABAP and JAVA systems in both directions via SAP WebDispatcher.
One of the option may be to use SAP Gateway of Portal Development, whcih is accessed through Live IP and register Remote ABAP system to Poral PRD system (by maintaining SLD entriy in SLDAPICUST T-code). I don't know weather such communication will work or not ..as it may require SLD Bridge configuration from Portal DEV to Portal PRD... may be... and may be to enable some portal communcaitons on Ports 3300, 50000 (Java Side), 3200, (ABAP side) ...
Or
at SAP Webdispather host (which is accessed first for Portal PRD requests..), the Standalone gateway needs to be setup to establish such SLD communication ?
I am confused abt the final setup of the above mentioned SLD setup. So requesting you to provide possible options/suggestions for the same.
Regards,
Bhavik G. Shroff

Hi,
I would suggest you to install standalone gateway between portal and your PRD system. Register portal host and gateway in the SLD and same enter in RZ70 on your PRD system. As a result both will be able to communicate with each other.
Thanks
Sunny

Unable to add SAP system to SLD

Hi all,
I am trying to add a new SAP WEB AS 640 system to my SLD.
But the SLD only shows latest available Product version as 620.
I downloaded the latest cimsap,CR_Content,CR_Delta zip files from the marketplace.
On applying note 669669, import of cimsap.zip file is successful, but import of latest CR_Content file gives following error: <b>"The content version 2.0 of the full import does not fit to the current content of the target namespace."</b>
I am unable to add the SAP system. What should I do?
Regards,
Puloma.

Hi Puloma,
Follow the steps specified in this link.
http://help.sap.com/saphelp_nw04/helpdata/en/2c/5f7ecd8ddc454ca86ff6e53919b0d1/content.htm
Please reward appropriate points.
Bala
Message was edited by: Bala Krishnan

How to add node in Java system NW 7.3 ehp1

Hi Everyone,
Hoe to add node in JAva System in Nw 7.3 ehp1.
Whats are point which need to keep in mind before adding node?
Regards
Adil

Hi Adil,
Follow the below steps
1.Start the Config Tool by double-clicking the configtool script file in <SAP_install_dir>/<system_name>/<instance_name>/j2ee/configtool directory.
2.choose the Java instance according to the level you want to make configurations.
3.Choose the Servers tab.
4.In the Custom Number of Server Processes field, enter the number of server processes you want to have. Click on set and save the configuration
Choose Check Value to verify that your server is capable of handling the number of server processes you entered. Correct the value if necessary.
Restart the java engine.
You need adjust the heap memory accordingly
SAP Note 723909 - Java VM settings for J2EE 6.40/7.0
Checked the sapnote if java don't come up
1658950 - J2EE System fails with "exitcode = -2"
http://scn.sap.com/community/performance-scalability/blog/2013/08/29/java-memory-sizing-procedure-pragmatic-approach
With Regards
Ashutosh Chaturvedi

Exporting Java Add in and Importing to Standalone Java system

Hi,
I have a requirement to export Java system which is ABAP+JAVA and build a new standalone Java system through import. Is it possible, if so please provide any documents or links.
Thanks
Shiv

Hi Shiv,
I've never heard that it's possible, but you could install a new Java system and import the self devloped components of your java software there (e.g. in SLD you can export a software component and then import it somewhere else). For database tables you might use an export- import function of your database, but I'm not sure about that.
Regards
Cornelia

When I define my R/3 system in XI SLD,I got CIM_ERR_ALREADY_EXISTS message

<b>CIM_ERR_ALREADY_EXISTS: Instance already exists: SAP_BCSystem.CreationClassName="SAP_BCSystem",Name="BRP.SystemNumber.0020270914.SystemHome.sapprddb"</b>
Before I defined R/3 system in XI SLD wrongly, after that I delete from Business and technical , after that I start new definition.And It gave me error above.
I think some data must be deleted related with the previous definition.
How can I correct this error?
Thanks

There was a BRP system in Class: BC System. I removed it.
And I tryed to add BRP system (technical landscape). It gave me error belowe:
<b>500 Internal Server Error</b>
Web Dynpro Container/SAP J2EE Engine/6.40
Failed to process request. Please contact your system administrator.
Error Summary
While processing the current request, an exception occured which could not be handled by the application or the framework.
If the information contained on this page doesn't help you to find and correct the cause of the problem, please contact your system administrator. To facilitate analysis of the problem, keep a copy of this error page. Hint: Most browsers allow to select all content, copy it and then paste it into an empty document (e.g. email or simple text file).
Root Cause
The initial exception that caused the request to fail, was:
<b>java.lang.IllegalArgumentException: The node, node element, and attribute info MUST NOT be null</b>

Sun Java System Portal Server 6.0 FAQs

Sun Java System Portal Server 6.0 FAQs.
Author: Sanjeev Agarwal
Q. How to connect to external URLs from Sun ONE Portal Server? I want to use URL Scrapper for some of external sites/URLs.
Ans:
You can connect to external URLs if you have a Proxy Server running.
If you are using Web Server addition of Sun ONE the Portal Server then
go to /opt/SUNWam/servers/https-hostname.domainname/config/ dir
In the jvm12.conf file, enter the followings:
http.proxyHost=proxyservername.domainname
http.proxyPort=80 (or the appropriate proxy server port number)
https.proxyHost=proxyservername.domainname
https.proxyPort=80 (or the appropriate proxy server port number)
If you are using Sun ONE AppServer addition of Sun ONE Portal Server then
go to /var/opt/SUNWappserver/domains/domain1/<server-instance>/config dir
In the server.xml file, enter the followings:
<jvm-options>-Dhttp.proxyHost=proxyservername.domainname </jvm-options>
<jvm-options>-Dhttp.proxyPort=80 (or the appropriate proxy server port number) </jvm-options>
<jvm-options>-Dhttps.proxyHost=proxyservername.domainname </jvm-options>
<jvm-options>-Dhttps.proxyPort=80 (or the appropriate proxy server port number) </jvm-options>
After this modification restart the server.
Q. Explain all the processes (solaris 8 and S1 Portal Server 6.0) which runs when I start the Sun ONE Portal Server.
Ans.
These are the processes that a running Portal Server installation (Sun ONE WebServer addition, without SRAP) generally has by default.
1. Directory server processes:
- ns-slapd (LDAP server instance)
- uxwdog (admin server process) (parent process)
--- ns-httpd
----- ns-httpd
2. Auth Helper processes:
- doUnix
3. Web-Server/Identity-Server/Portal-Server processes:
As the Portal Server and Identity Server runs as web application on the Web Server, so they share the same JVM and processes.
- uxwdog (web server admin server process) (parent process)
--- ns-httpd
----- ns-httpd
(for each web server instance)
- uxwdog (parent process)
- ns-httpd
- ns-httpd
or (in case of MaxProc=n )
- uxwdog (parent process)
--- ns-httpd
----- ns-httpd
----- ns-httpd
----- n
Q. I have created a custom Provider but getting this error when I access the desktop, what do I do?
> error in the desktop.debug file:
> ERROR: DesktopServlet.handleException()
> java.util.MissingResourceException: Can't find bundle for base name CustomTabContainerProvider,
Ans:
It needs a resource bundle for the custom provider. You need to create a file CustomTabContainerProvider.properties (as mentioned in the error message) and put it into the /etc/opt/desktop/classes directory. If you are not using any properties defined in this resource file then it can be a empty file. Have a look on the properties files that bundled containerProviders uses in dir <portal-install-dir>/SUNWps/web-apps/https-<host.domain>/portal/WEB-INF/classes.
As you are extending JSPTabContainerProvider class, you can just copy the file JSPTabContainerProvider.properties from the above directory after renaming it to the <defined-provider-name>.properties (in your case CustomTabContainerProvider.properties) and move it into /etc/opt/desktop/classes directory.
Q. what is actually multiple instances of Portal Server means?
Ans:
Multiple instance of Portal Server means, you will have more http listeners for the same desktop contents and the same identity profiles stored in a single Directory Server which all the instances share.
In simple words you can have your Portal Server listening on different http ports, but uses same configuration, desktop and identities.
It can help you to share the load for Portal Server http requests. The alternate methods are to create more web server virtual server processes (maxProc=n, but in this case the listening port will be 1 only) or use some hardware load balancer.
You can achieve more from multiple instances if you have a multi level organization, you can change the look and feel of all the instances, images, services, components and can assign each instance to different organization or sub-organization.
Q. How do I check the availability of the Sun ONE Portal Server/Identity Server services.
Ans:
You can check the availability of Sun ONE Identity Server services from following urls.
http://<host.domainname>:<port>/amserver/sessionservice
http://<host.domainname>:<port>/amserver/loggingservice
To know the availability of components of Sun ONE Portal Server like Desktop/providers/Rewriter/Netmail you have to login into desktop. These are not services, but just the programming identities which will work if your Web Server and Identity Server is running.
Just go to URL http://<server>:<port>/portal/dt , if it shows up that means your portal server is fine, and these entities will work for sure.
Q. I am able to add the yahoo channels to existing users. But I am getting the weather for London not for local New Jersey. My language pref is to en|en_US and also the server is the default U.S server and not europe. How do I add the cities I want to see on weather channel?
Ans:
A Portal user himself (after login) can select what cities he want to see in weather channel.
Steps:
- click the edit button of weather channel
- click on the area you belong to from Available Sections
- select the cities from Available Cities select box and add them to Your Choices.
- click finished from select city page and then again click finished from select area page.
It will come back to the Portal Desktop and you will see all the cities you have selected in the weather channel.
Q. How to use getContent() method to use in custom jsp providers (developed by ourselves) so that it can be used to retrieve a jsp page. I have already placed the JSP file in the directory structure /etc/opt/SUNWps/desktop/default/channel_dir. But still the jsp is not being displayed.
Ans:
You don't have to do anything in the custom JSPProvider's getContent method except the call { return super.getContent(request,response); } . If all you want is just to show your jsp, then create a channel from the default JSPProvider, and edit the property contentPage of that channel from samplecontent.jsp to your jsp name, save the changes and login again. You should see your JSP.
Q. I want to remove all the buttons (help/edit etc.) from all the channels/one particular channel in my desktop?
Ans:
You can hide any buttons you want from any channel.
These steps show how to hide all the buttons.
1. Create a channel say "myNetlet" from netlet provider.
2. Set the channel title to "myNetlet"
3. Go to the dir /etc/opt/SUNWps/desktop/default/JSPTableContainerProvider and edit the file providerCommands.jsp, and modify the last line :
from :
<%=minMaximizeCommand%><%=helpCommand%><%=editCommand%><%=detachAtachCommand%><%=removeCommand%>
to:
<% if ( !(title.equals("myNetlet"))){ %><%=minMaximizeCommand%><%=helpCommand%><%=editCommand%><%=detachAtachCommand%><%=removeCommand%><% } %>
4. Clean the dir mentioned below which contains compiled JSPs. /var/opt/SUNWps/https-<host>.<domain>/portal/tmp/_jsps/_etc/_opt/_SUNWps/_desktop/_default_en/_JSPTableContainerProvider/_html and reload the page.
Relogin, and you would not see any buttons on "myNetlet" channel. You can customize this logic as per your needs.
Q. How to change the title of SampleJSP Channel. I tried to change the channel properties title value via iplanet directory Server Access Management GUI. But it is not getting reflected.
Ans:
Through Admin console you can change the channel property "title", and as soon as you refresh the page (Shift reload) of relogin in the portal it get's reflected.
The reason to this problem may be due to the channel property "title" is having "propagate" value as false and you are setting the channel title in the org level display profile not in the user level display profile.
So better you change the channel name in user's display profile also.
For this login into admin console and go to :
- View: "User Management" -> click on organization -> Show: Users
- click on the blue arrow of that user
- click on Edit in section Desktop (this will open a window)
- then change the channel properties same way you do for Organization display profile.
Q. Login Problem with SunOne Portal 6.0.
I was able to download and install sun one portal 6 on Solaris 8. The sample portal page came up after installation. However whenever I try to login to the Login channel with "amadmin" and the passphrase I used during installation, it takes me to another page - iPlanet/LDAP authentication page. Here I tried using the same login, but fails every time (the same login page appears). The url that shows is "http://<hostname>/amserver/login?module=dproadmin&goto=/amconsole/base/AMAdminFrame"
I tried registering myself as a new user as well. This too fails.
Ans:
Make sure you are giving fully qualifying the hostname in the url which invoked the desktop. This in fact is documented in the administration documentation. If the hostname is not fully-qualified, the login page goes into an endless mode. Again, the correct url is "http://<fully-qualified-hostname>/portal". Once you get to the desktop, the login and the new user registration works.
Q. How to send variables/parameters from 1 app to another app deployed on Sun ONE Portal Server? It may be the apps or different JSPs of JSP provider channel.
How to achieve inter channel communication in Sun ONE Portal Server?
Ans:
You can use servlet context object or session, or may be the request object itself to store the information from one channel and use that in another channel. The use of either of these 3 approaches may depend on your requirements. Using session, the information will be available to that user's channels only, using request, the information will be available for that user and that request only and by using ServletContext you can share the information across users and sessions. You can obtain DesktopServlet's ServletContext object inside JSP/JSPProvider.
Q. I am trying to modify the default desktop JSPs in TableContainerProvider and TabCotntainerProvider dirs, but it is not picking my modified JSPs ? what do I do?
Ans:
One easiest way to 100% ensure that it updates all your new jsp pages is to remove all the compiled jsps so that with next request the Sun ONE Portal Server compiles all the jsps and will make sure that your modification will be taken care of in next request.
Go to /var/opt/SUNWps/https-<instance_name>/portal/tmp/_jsp/_etc/_opt/_SUNWps/_desktop/_default_<locale>/ and remove everything. and access the Portal server, it will be little slow as it has to compile all the JSPs again. Here you will find directories in the name of Containers and Channels, so if you are modifying any particular Container/Channel you can just delete that only. This approach can help a lot during development time.
Q. What is the location of compiled JSPs in Sun ONE portal Server and what servlet spec does it supports?
Ans: The Portal server 6.0 runs on Sun ONE Web Server 6.0 sp2, which supports only jdk 1.3 and servlet spec 2.2 only. The Sun ONE Portal Server keeps the compiled jsps of desktop and channels in : /var/opt/SUNWps/https-<instance_name>/portal/tmp/_jsp/_etc/_opt/_SUNWps/_desktop/_default_<locale>/ dir as per the channels/container names.
Servlet 2.3 is supported if you run the Portal Server edition that runs on Sun ONE Application Server 7.0.
Q. How do I change jdk for Sun ONE Portal Server to another jdk? I want to change the JDK of only one of my Portal Server instances, is it possible? how?
Ans:
Yes you can achieve both.
A. To change the JDK for all the server instances:
Open <portal-install-dir>/SUNWam/servers/https-admserv/start-jvm file and modify the first line
NSES_JDK=/usr/java_1.3.1_04; export NSES_JDK
to
NSES_JDK=<your-jdk-location> ; export NSES_JDK
then open <portal-install-dir>/SUNWam/servers/https-<instance-name>/config/jvm12.conf file of all the server instances and add a line
jvm.option=-server after the first line
B. To change the JDK for a particular server instances:
Make a another copy of the start-jvm file rename it and modify the jdk location in it as mentioned above.
Open the start script from <portal-install-dir>/SUNWam/servers/https-<instance-name> dir and modify these lines :
if test -r {SERVER_ROOT}/https-admserv/start-*
then
for STARTSCRIPT in {SERVER_ROOT}/https-admserv/start-*
modify this to
if test -r {SERVER_ROOT}/https-admserv/<changed_name_of_start-jvm-file>
then
for STARTSCRIPT in {SERVER_ROOT}/https-admserv/<changed_name_of_start-jvm-file>
Note: As Portal Server 6.0 uses Web server 6.0 sp2, jdk 1.4 is not supported.
Q. How do I create a custom login page or a link, which will just log me into the portal server.
Ans:
You can create a custom page in your jsp page, just add this portion of html into your web page :
<FORM action="http://<server>:<port>/amserver/login?module=<login-module>&page=1" method=post name=login_form2 target=_top>
Login page using <login-module><br>
<P>Enter UserId<BR><INPUT name=TOKEN0 size=22></P>
<P>Enter Password<BR><INPUT name=TOKEN1 size=22 type=password></P>
<P><INPUT name=Submit type=submit value=Submit> </P>
</FORM>
The <login-module> can be LDAP or Unix or Membership which ever you have enabled. Or instead of this you can create a link. For example for LDAP auth module :
"<a href="http://<server>:<port>/amserver/login?module=LDAP&page=1&TOKEN0=user&TOKEN1=password" target=_top> Login into Portal </a>"
where user and password are the user credential for the portal server.
Q. Can I install a portal server pointing to another Identity server? I want to install few postal servers (on different machines) pointing to same identity server, is it possible?
Ans:
No, right now the Sun ONE Portal Server is tightly integrated with Sun ONE Identity Server so you can't just install only Sun ONE Portal Server and point it to another Sun ONE Identity Server. You can have a common Directory server if you want.
Q. I have an application which takes input in from anonymous user and then to complete the request the user than has to login. I am having problem in passing the taken input from anonymous page to logged in user. all the request parameters are lost when I log in. How do i get the request parameters after I log in
Ans:
You can create a custom login page and submit the form to "/amserver/login" with a hidden parameter "goto" through which you basically specify which url to go after you log in. So you can use this mechanism to create a query string with all your request parameters you want to pass after login. For example:
You can create a jsp which take few inputs from user and to complete the request you have to login so it posts the input form to a login jsp and stores the parameters taken from user in a hidden field (goto) :
<FORM action="/amserver/login?module=LDAP&page=1" method=post name=login_form2 target=_top>
Login page using LDAP<br>
<P>Enter UserId<BR><INPUT name=TOKEN0 size=22></P>
<P>Enter Password<BR><INPUT name=TOKEN1 size=22 type=password></P>
<INPUT TYPE=HIDDEN NAME="goto" VALUE="/portal/dt?param1=<%=request.getParameter("param1")%>&param2=<%=request.getParameter("param2")%>">
<P><INPUT name=Submit type=submit value=Submit> </P>
</FORM>
After you login through this page both the param1 and param 2 will be available in the request object after you login and you can retrieve them in your application or jsp.
Q. I have few System.out.println in my jsp which i am using in my JSP provider channel, but when I look at the portal server's /var/opt/SUNWam/debug/desktop.debug file, none are there. I looked at the web server's access and error logs too, but it is not there also. Can somebody tell me how do it get those ? Do we have any other mechanism to put debug logs ?
Ans
By default the binary which web server runs is uxwdog which eats up System.out.println output. If you want to see the System.out.println then you need to change the product binary from the start script of the portal server instance.
- Go to <portal-install-dir>/SUNWam/servers/https-<instance-name> and open the start script
- Change the PRODUCT_BIN=uxwdog to PRODUCT_BIN=ns-httpd , save the file
- Run the script ./start to start the portal server
Note : with ns-httpd ON the server will not leave that shell, and in the same window/shell you will be able to see all your System.out.println statements. To close the server you have to kill the server process with "kill -9 pids" command
Alternate way is to use api inside your application or jsp:
<%@page import="com.sun.portal.providers.jsp.JSPProvider, com.sun.portal.providers.*, com.sun.portal.providers.containers.*, com.sun.portal.providers.context.*" %>
<% JSPProvider p=(JSPProvider)pageContext.getAttribute("JSPProvider");
ProviderContext pc = p.getProviderContext(); %>
<%-- after that you can use these lines any where in your jsp --%>
<%
pc.debugError("your error msg");
pc.debugMessage("your msg");
pc.debugWarning("your warning msg");
%>
The particular mgs will be shwon in /var/opt/SUNWam/debug/desktop.debug file as per your "debugLevel" parameter setting in /etc/opt/SUNWps/desktop/desktopconfig.properties file. By default the debugLevel is set to error so only pc.debugError("error msg") will be shown.
Q. Multipart form (file upload) processing in providers? Is it supported
Ans:
The Sun ONE Portal Server's DesktopServlet does not have the ability to process a request with the content encoding type of multipart/form-data. DesktopServlet does not pass the input stream for the request on to the Provider.
To accomplish handling of multipart/form-data type requests, it is necessary to create a companion servlet or JSP that process the multipart/form-data. This servlet can then pass control back to the Portal channel. The data from the file can be shared between the servlet and the provider by using static Java members or by storing the data in a back-end database and then passing a reference to the data over to the provider.
Q. After installing the Portal Server I am trying to login as admin, but it is failing and coming back to login page every time. How do I login?
Ans:
The Default Admin user is 'amadmin' and the password is the PASSPHRASE you give during Portal Server installation. Try login using these credentials.
Also in the browser give the complete URL for the Portal Server like : Http://<myhost>.<mydomain>:<port>/amserver/login or Http://<myhost>.<mydomain>:<port>/amconsole. You can't login into portal server's IDSAME console by giving IP Address or just the hostname, also your machine should be listed in the DNS server so that it can resolve the name.
Q. I installed Sun ONE Portal Server 6.0 some time back, and now I want to know all the installation parameters and user/passwords for whole portal installation. How do I do that?
Ans:
The Default Admin user is 'amadmin' and the password is the PASSPHRASE you give during Portal Server installation. Also in the browser give the complete URL for the Portal Server like : Http://<myhost>.<mydomain>:<port>/amserver/login or Http://<myhost>.<mydomain>:<port>/amconsole. You can't login into portal server's IDSAME console by giving IP Address or just the hostname, also your machine should be listed in the DNS server so that it can resolve the name.
In case you have forgotten the port numbers and PASSPHRASE that you give during installation, you still can see all the information for each component of your Portal Server Installation. The Portal server and it's components like Directory Server, Web Server and IDSAME are installed as Solaris package so the system has all the information for these packages.
Portal Server : See file /var/sadm/pkg/SUNWps/pkginfo
Directory Server : See files /var/sadm/pkg/SUNWamds/pkginfo and /var/sadm/pkg/SUNWamdsc/pkginfo
Web Server : See file /var/sadm/pkg/SUNWamws/pkginfo
Identity Server : See file /var/sadm/pkg/SUNWamsam/pkginfo
Note: In any case you should never edit/modify these files.
Q. Controlling the display of the help (?) button.
Where are the links/image elements defined for the help/edit/minimize buttons? the leafWrapper.jsp pulls the hashtable out of the HttpRequest, and that hashtable is being used by providerCommands.jsp:
Hashtable commands = (Hashtable)request.getAttribute("provider_cmds");
Any idea where this is being set?
Ans:
- You can remove the help/edit button of any channel by adding the line into the Channel's properties by editing the Xml of display profile in the admin console.
<String name="helpURL" value="" advanced="false" merge="replace" lock="false" propagate="true"/>
<Boolean name="isEditable" value="false" advanced="false" merge="replace" lock="false" propagate="true"/>
The Attribute 'provider_cmds' is set into /etc/opt/SUNWps/desktop/default/JSPTableContainerProvider/tablecolumn.jsp :
<dttable:getProviderCommand id="provider_cmds" scope="request" />, and after that only the leafwrapper.jsp is included, but the Hashtable is generated by a class com.sun.portal.providers.util.ProviderCommands.java and made available through taglib classes. So you can't change the generated contents/string in the Hashtable.
But you can change the default 'alt' text displayed and the images linked to the help/edit icons. As this modification is at Provider level, it will change the icons for all the channels in the desktop.
Please see the file:
/opt/SUNWps/web-apps/https-<host>.<domain>/portal/WEB-INF/classes/JSPTABLEContainerProvider.properties.
Here you will find the mapping. The image location are given from the context root of portal server which is by default : /opt/SUNWps/web-apps/https-<host>.<domain>/portal.
Q. I have a number of web applications needed to integrate to portal server. Any pointers or tips of what my option is?
Ans:
You can very well integrate all your web application with Portal server. Portal Server 6.0 has web container same as Sun ONE web server 6.0 Sp2, which runs on Jdk-1.3.
If your web applications are just Servlets/Jsps then you can very well port them on Portal server's webserver which supports war module deployment. (infect for Web server the Portal server and Identity server is like a war module.)
There can be two possibilities in this case, either you put the whole of your application on portal server and make the link available into the desktop via 'Application Provider Channels' or you can create a client to your web application into portal server.
If your web application is on Sun ONE Application server 7.0 and needs authentication, you can also have SSO. If you just want to show the link of your web application into desktop then you can either use URL Scrapper to show the first page of your web application or use Bookmark channel to provide just the url.
The easiest way to make a client of your web application is to use JSP Channel using JSPProvider and put your logic into the samplecontents.jsp file or you can create your own custom Provider extending JSPProvider. There can be a lot of different configurations, depending on the web application you want to integrate and your needs
Q. I removed few channels from the org level display profile but still they are coming to the desktop of users, I had accessed the desktop before. why?
Ans:
If you still see any channel after you remove it from the display profile at organization lever, that means you have to edit the user's display profile. So go to admin console and select User from Show: menu and click on the blue arrow near the user. In the right frame under the 'Desktop' category click on the Edit link (right side). This will open user's display profile in a window. Now edit it as per your requirements.

Unfortunately Web Server 6.0SP2 is no longer available for download.
If you must use Web Server 6.0, you should use the most current Service Pack. It is backward compatible and contains many performance and security fixes.

Creating a Business system in the SLD

I am receiving an error message when trying to create a business system in the SLD. The error is "The selected client has an associated logical system nae that is already used for another business system. Select a different client."
Here is my issue. The business system that I am creating is for our R/3 4.6C production system. I currently have a business system for our R/3 4.6C quality system. Our prodution and quality R/3 systems do have the same logical system name and client number. This is because we recreate our qaulity R/3 system from our production system.
So, the question is, How do I create a business system in the SLD for my production R/3 system when the logical system name is used assoicated with and business system.
I should add that all my R/3 systems have been created as technical systems without any problems.
Thanks,
Jim

It is recommended to have all ALE names unique.
If it is not possible the following workaround can be used.
Create one system in SLD (business system/technical system) which contains the ALE name. Proposal: The production system
Create the other systems(dev/QA) without the ALE name
During configuration the production system will be configured as usual.
For Dev/QA systems: Define in the receiver agreement the header mapping and use The Receiver service to reference the production system. Because you reference the production system the ALE name of the production system will be used to fill the idoc.

How to add a system into Solution Manager directory.

Hi!
Can anybody tell me how to add a system into Solution Manager directory before generating license key for ECC installation .
Also,
How to connect the XI in same box with SolMan and ECC in defferent server to SolMan 3.2 .
I am going to install SolMan and than XI in and box and after that ECC in a seperate box.
AM I right?
regards,
Pratip Bhattacharyya

Hi Bratip Bhattacharyya,
SolMan 3.2 needs SLD only for automatic data gathering of the sap landscape; you can choose between SLD and LIS in transaction SMSY_SETUP (which simply uses the TMS-domain controllers for information gathering).
XI needs SLD, but XI needs also a netweaver04 (s) system (Abap WAS 6.40). SolMan 3.2 isn't a netweaver04 system (Abap WAS 6.20). So you have to install XI as an own central instance (Abap + Java) on the same windows server, if you like. In this case you have to install for XI an own SLD. Different SLDs can create bridges between themselves. Please look at the SLD configuration guide (quicklink /netweaver -> installation guides).
But don't ask me how to install two sap systems on one server on windows (on Linux it's easy I have done so); basically it will have an own SID and own "service" numbers (which means own tcp port numbers).
If you can't dedicate to XI an own server, it's only a question of hardware sizing. For the different combinations of netweaver components you should study the master guide for netweawer.
Bye
Message was edited by: Riccardo Escher

System registered in SLD invisible in solution manager configuration

Hi
I have installed Solution Manager EHP1 / Oracle 10g / Win2003 on a VM. I ran into a issue in the Managed system configuration. The first step in the maanaged system configuration would help us select the satelllite systems which and configured in the SLD. Since systems were not yet added to SLD just the solution manager system shows up.
Here is the problem
I have added one system to the SLD using "Add Technical system" from http://localhost:50000/sld. This is a ABAP sysystem. The addition went through successfully however this does not reflect when I check the same in solution manager configuration "Managed system configuration"
As per the guide in the same page, I have checked on "Maintain Technical systems" Here too when I search for the system I created in SLD , I am not able to find it. Is there another way of manually maintaining the system in the SLD?
Any ideas as to why this might happen? Does one have to bounce the instance after adding systems to SLD/.... just wondering?
Ideas?
thanks
Ravi

Hi Rajeev
Thanks for your response however I fixed it. It looks like I had incorrectly mentioned the host in RZ70. Instead of mentioning the hostname of the solution manager I had mentioned the host name of the satellite system
The below link helped me fix the issue
http://help.sap.com/saphelp_nwpi71/helpdata/en/e7/01503ede925441e10000000a114084/content.htm
thanks
ravi

TREX as an Technical System in the SLD

Via the sldreg my TREX instance is entering it's information into the SLD. But now I have to add my TREX instance to a technical system in the SLD.
Normally an ABAP or a Java system registers itself into the SLD with a technical system, but TREX doesn't do this
How do I add my TREX instance to a technical system in the SLD?

may be you can check whether the sld data supplier is updating the data or not
http://help.sap.com/saphelp_nw04s/helpdata/en/8a/361fb70681234fb7d3af841ec2383e/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/ea/cd2e807e0e45bf9da67354f452fc05/content.htm
and for ABAP, can be checked in RZ70
http://help.sap.com/saphelp_nw04/helpdata/en/ea/cd2e807e0e45bf9da67354f452fc05/frameset.htm
In system B's sld, check whether an sld is added towards the SLD server of C

Adding a JAVA system into Solman

Hi All,
I've recently added a standalone JAVA instance (No ABAP) into our Test setup. I can see the JAVA system (EDJ) in the SLD and I can see it in SMSY under System Components > Java-System, but this doesn't help me when I need to see it under Systems.
My main issue here is that I'd like to download Support Stacks for EDJ and when going via DSWP I can't select EDJ from the list because it's not listed under Systems in SMSY.
Hope this makes sense and someone can help me out :-p
Many Thanks in advance for any info

> Yes I could add it manually, but this doesn't really help when the rest of my systems are driven and updated by the SLD.
No - not ADD it but ASSIGN it.
> I can see the system under System Components > Java-System (which was added via the SLD), but I need to have it under Systems so that it will make downloading stack and packs easier.
- open the relevant ABAP system under SYSTEMS
- change to "change" mode
- select for the relevant Java system (e. g. Enterprise Portal core) "Relevant" and "System component assignment"
- select the system component
- select "Java"
Then you can download both SPs for ABAP + Java at the same time.
Markus

NullPointerException while trying to add "WebLogic System Lib." in a classp

I'm having an error while trying to add WL System Libs in a classpath of an Hibernate configuration.
// yes, required is Hibernate Tools Eclipse plugin, v3.2.0 GA
/// available through http://www.hibernate.org/255.html - click on any "download" link
I first thought it would certainly be an Hibernate Tools bug, but according to the Stack Trace, it might be BEA WLS Tools which is faulty (=> NullPointerException)
That's why I preferred posting here first, before even issuing a bug report on http://bugzilla.bea.com/
Steps to reproduce:
1. Open the "Hibernate" perspective
2. Create or edit an Hibernate configuration (through the "+" icon or by right-click then "Edit Configuration" on an existing
3. Go to the "Classpath" tab.
4. Click "Advanced..." button, then check "Add Library" radio button; select "WebLogic System Libraries" entry and then "Next >".
5. Error happens in the Eclipse "Error Log" tab and the WebLogic library is not added.
Details
Message: "Unhandled event loop exception"
Exception Stack Trace:
java.lang.NullPointerException
     at com.bea.workshop.wls.ui.internal.SystemLibrariesContainerPage.initialize(SystemLibrariesContainerPage.java:93)
     at org.eclipse.jdt.internal.ui.wizards.buildpaths.ClasspathContainerWizard.getContainerPage(ClasspathContainerWizard.java:155)
     at org.eclipse.jdt.internal.ui.wizards.buildpaths.ClasspathContainerWizard.getNextPage(ClasspathContainerWizard.java:170)
     at org.eclipse.jface.wizard.WizardPage.getNextPage(WizardPage.java:172)
     at org.eclipse.jface.wizard.WizardDialog.nextPressed(WizardDialog.java:813)
     at org.eclipse.jface.wizard.WizardDialog.buttonPressed(WizardDialog.java:369)
     at org.eclipse.jface.dialogs.Dialog$2.widgetSelected(Dialog.java:616)
     at org.eclipse.swt.widgets.TypedListener.handleEvent(TypedListener.java:227)
     at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:66)
     at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:938)
     at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:3682)
     at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3293)
     at org.eclipse.jface.window.Window.runEventLoop(Window.java:820)
     at org.eclipse.jface.window.Window.open(Window.java:796)
     at org.eclipse.jdt.internal.ui.wizards.buildpaths.ClasspathContainerWizard.openWizard(ClasspathContainerWizard.java:226)
     at org.eclipse.jdt.ui.wizards.BuildPathDialogAccess.chooseContainerEntries(BuildPathDialogAccess.java:272)
     at org.eclipse.jdt.internal.debug.ui.actions.AddLibraryAction.run(AddLibraryAction.java:39)
     at org.eclipse.jdt.internal.debug.ui.launcher.RuntimeClasspathAdvancedDialog.okPressed(RuntimeClasspathAdvancedDialog.java:156)
     at org.eclipse.jface.dialogs.Dialog.buttonPressed(Dialog.java:464)
     at org.eclipse.jface.dialogs.Dialog$2.widgetSelected(Dialog.java:616)
     at org.eclipse.swt.widgets.TypedListener.handleEvent(TypedListener.java:227)
     at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:66)
     at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:938)
     at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:3682)
     at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3293)
     at org.eclipse.jface.window.Window.runEventLoop(Window.java:820)
     at org.eclipse.jface.window.Window.open(Window.java:796)
     at org.eclipse.jdt.internal.debug.ui.actions.AddAdvancedAction.run(AddAdvancedAction.java:39)
     at org.eclipse.jdt.internal.debug.ui.actions.RuntimeClasspathAction$1.widgetSelected(RuntimeClasspathAction.java:137)
     at org.eclipse.swt.widgets.TypedListener.handleEvent(TypedListener.java:227)
     at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:66)
     at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:938)
     at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:3682)
     at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3293)
     at org.eclipse.jface.window.Window.runEventLoop(Window.java:820)
     at org.eclipse.jface.window.Window.open(Window.java:796)
     at org.eclipse.debug.internal.ui.launchConfigurations.LaunchConfigurationsDialog.open(LaunchConfigurationsDialog.java:1133)
     at org.eclipse.debug.internal.ui.launchConfigurations.LaunchConfigurationPropertiesDialog.open(LaunchConfigurationPropertiesDialog.java:230)
     at org.eclipse.debug.ui.DebugUITools.openLaunchConfigurationPropertiesDialog(DebugUITools.java:429)
     at org.eclipse.debug.ui.DebugUITools.openLaunchConfigurationPropertiesDialog(DebugUITools.java:408)
     at org.hibernate.eclipse.console.actions.EditConsoleConfiguration.edit(EditConsoleConfiguration.java:104)
     at org.hibernate.eclipse.console.actions.EditConsoleConfiguration.doRun(EditConsoleConfiguration.java:71)
     at org.hibernate.eclipse.console.actions.ConsoleConfigurationBasedAction.run(ConsoleConfigurationBasedAction.java:63)
     at org.eclipse.ui.actions.BaseSelectionListenerAction.runWithEvent(BaseSelectionListenerAction.java:168)
     at org.eclipse.jface.action.ActionContributionItem.handleWidgetSelection(ActionContributionItem.java:546)
     at org.eclipse.jface.action.ActionContributionItem.access$2(ActionContributionItem.java:490)
     at org.eclipse.jface.action.ActionContributionItem$5.handleEvent(ActionContributionItem.java:402)
     at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:66)
     at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:938)
     at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:3682)
     at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3293)
     at org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:2389)
     at org.eclipse.ui.internal.Workbench.runUI(Workbench.java:2353)
     at org.eclipse.ui.internal.Workbench.access$4(Workbench.java:2219)
     at org.eclipse.ui.internal.Workbench$4.run(Workbench.java:466)
     at org.eclipse.core.databinding.observable.Realm.runWithDefault(Realm.java:289)
     at org.eclipse.ui.internal.Workbench.createAndRunWorkbench(Workbench.java:461)
     at org.eclipse.ui.PlatformUI.createAndRunWorkbench(PlatformUI.java:149)
     at org.eclipse.ui.internal.ide.application.IDEApplication.start(IDEApplication.java:106)
     at org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:169)
     at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLauncher.java:106)
     at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.java:76)
     at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:363)
     at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:176)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:508)
     at org.eclipse.equinox.launcher.Main.basicRun(Main.java:447)
     at org.eclipse.equinox.launcher.Main.run(Main.java:1173)
Session data: (empty)
(copied from another unrelated error - provided for info)
eclipse.buildId=M20071023-1652
java.version=1.5.0_14
java.vendor=Sun Microsystems Inc.
BootLoader constants: OS=win32, ARCH=x86, WS=win32, NL=en
Command-line arguments: -os win32 -ws win32 -arch x86

Looks like a case that wasn't encountered before. Please go ahead and
open a bug at http://bugzilla.bea.com?
Thanks,
- Konstantin

OVD - Integration with Sun Java system Directory Server

Hi All,
I have the following iusse, i'm trying to configure OVD 11.1.1.3 with Sun Java System Directory Server adapter for enterprise user security but when I import Oracle ldif schema file (iPlanetSchema.ldif) I have the following error:
add attributetypes:
+( 1.3.6.1.4.1.42.2.27.8.1.5 NAME 'pwdCheckSyntax' EQUALITY integerMatch SYNTAX '1.3.6.1.4.1.1466.115.121.1.27' SINGLE-VALUE )+
modifying entry cn=schema
ldap_modify: Type or value exists
ldap_modify: additional info: attribute type pwdCheckSyntax: Does not match the OID "1.3.6.1.4.1.42.2.27.8.1.5". Another attribute type is already using the name or OID.
In the default Sun DS schema there is attribute with the same OID:
+../config/schema/00ds6pwp.ldif:+
attributeTypes: ( 1.3.6.1.4.1.42.2.27.8.1.5 NAME 'pwdCheckQuality' DESC 'Level of required quality' SYNTAX 1.3.6.1.4.1.1466.115.121.1.27 X-DS-USE 'internal' SINGLE-VALUE X-ORIGIN 'Password Policy for LDAP Directories Internet Draft' )
Is it possible?
I'm reading the following document:
http://download.oracle.com/docs/cd/E12839_01/oid.1111/e10046/adv_integrate.htm#CACIIIEG
Thanks in advance,
Zaic

Thank you very much. The name of the file is actually C:\WINDOWS\system32\productregistry.
I renamed that to productregistry BACKUP and I can now install the LDAP. Man, I should have posted this a week and a half ago when I first started having this issue. It would have prevented a few forehead dents from banging my head on the keyboard.
thanks again

Add java system on another SLD

Similar Messages

Maybe you are looking for