Add routine for line output in ME55 via OMGK

Dear all,
i successfully added a routine for line output in ME55 via OMGK. output works fine in me55.
I added a text-element in report SAPFM06B in order to use it as header for my output.
i also defined the header in view V_T16LD, but it doesnt work.
can anybody give advice?
Regards
REA

FYI, in case anyone else is having this issue, I solved it by using a tag and adding in the stylesheet:
br {mso-data-placement:same-cell;}

Similar Messages

Authorization Object for specific Output types maintained via MN11 & MN12

Hello,
I was looking to see if we could limit the access of users so that they can change only specific output types (see T-code NACE) when using transaction code MN12. specifically only LPH1 (standard SA output type). I'm not seeing anything within the system, and I can't seem to find anything via SNC which describes this, so I am wondering if this there is nothing like this/
Is anyone aware of something for this or a potential solution if an authorization object doesnt exist?

duplicate.. please close.

Need a CS2 workaround - Add space for line at top of text box

I need a way to add space before a line of text (it's a subheading kind of thing) which is the fist line in the text box, since "space before" in paragraph styles doesn't work for this. I'm stuck using CS2 at work, but I made the layout on CS4 at home that uses a workaround involving 0pt rules offset and the Keep in Frame option. This feature is not in CS2 (ugh).
Any help is appreciated.

A yucky way of pulling this off without CS3's (and later) "Keep Above Rule in Frame" could be to set the leading extra large. The default Baseline options for text frames is to ignore leading, but you can change it to use the leading. A drawback is that also impacts your regular text ...
How about an even yuckier trick?
1. Make the font extra extra large. InDesign ignores super-extra-big leading by default, but it does honor text size. To be precise: the text size that's in the character panel size box (this is important!). If you make the font extra extra large, this is the size that's going to be used.
2. Now you have large text ... so scale it back down using the Horizontal and Vertical scale in the Advanced Character Formats. If you made the text twice as large, use 50% / 50% to scale it back.
3. Done.
I said it would be yuckie.

PS report S_ALR_87013558 - add layout for alv output

Hi Friends
In Standard report of PS S_ALR_87013558 I hav to add a selection screen field for selecting layout and accordingly the ALV layout will be displayed. Can it be achieved by enhancing, or we need to copy the report and modify and configure or is there any other way to do it.
Thanks
Moumita

Hi,
I think that can be achived through the dynamic selections to add fields to the dynamic selector you check the transaction CATS_SELVIEW press f4 on name of view and select standard then display you can see all functional groups, tables, table fields. Assign the respective according to your critaria.

[svn] 3203: Add support for inline two-way data binding (syntax is @{expr}) .

Revision: 3203 Author: [email protected] Date: 2008-09-14 05:11:47 -0700 (Sun, 14 Sep 2008) Log Message: ----------- Add support for inline two-way data binding (syntax is @{expr}). Also add support for two-way data binding via the <mx:Binding> tag and the new property twoWay=boolean (default is false). Code Reviewer: Paul QA: tests for this feature need to be added to the regression test suite Doc: new feature which needs to be documented Modified Paths: -------------- flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/InterfaceCompiler.java flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/analyzer/SyntaxAnalyzer.java flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/builder/AbstractBuilder.java flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/builder/AnonymousObjectGraph Builder.java flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/builder/DocumentBuilder.java flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/builder/ModelBuilder.java flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/builder/ServiceRequestBuilde r.java flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/builder/XMLBuilder.java flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/builder/XMLListBuilder.java flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/dom/BindingNode.java flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/lang/TextParser.java flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/rep/BindingExpression.java flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/rep/MxmlDocument.java flex/sdk/trunk/modules/compiler/src/java/flex2/compiler_en.properties

EvilDave UK wrote:
Surely there's a more practical way around this without having to reboot?
Before you go to the trouble of going through all those steps, be warned that attempting to use Dreamweaver CS4 with SVN could even cause Dreamweaver to crash after updating to SVN 1.6.2. I, too, have abandoned SVN integration with Dreamweaver until the problems are sorted out. I reported this problem to Adobe a couple of weeks ago, and spent a long time working with an Adobe engineer, who was able to reproduce the problem, but not offer a solution. Hopefully, the next version of Dreamweaver will have more robust support for Subversion.

Urgent:output for line item not working

hi
we are trying to get the output at item level in the sales order.we click on the line item and give a print out..but it is showing details of other line items as well. is there a ways we can get a printout for only the selected line items.
what we did.
1. maintained a output type for item category
2. assigned the output type tot he item category.
but still this is not working the way we want. do we need to use a different print program for the item level printing...
Pls reply soon we are goin live in 2 days with ur contact no....thanks...

Hi,
I think this is not possible through standard, but I can suggest if you can seek help from your technical guys asking if it is possible through output routines what we maintain in the output determination procedure....
Give him the requirement and ask him if he can create a custom routine for this.....
Hope this will help you........
Regards
Bageerath

Debugging routine for output type in purchase order

HI all,
I am unable to get breakpoint to stop at a custom requirement routine for a custom output type (ZSND) for purchase order.
I created routine 901 and explicitly add 'break userid' . In ME21N, it stops at the routine. In ME22N, it did not stop at the routine.
I like to it stop during ME22N. I tried adding the custom output in ME22N in Messages details, then save. It still did not stop at the custom routine. Can anyone pls shed lights how i can make it stop ? Or could it be that no output is generated during the ME22N changes, thus it would stop at that routine in ME22N ?
thanks
Joyce

Hello Joyce
The first output ZSND creates the ORDERS IDoc (ME21N). For this output type you obviously have assigned the VOFM condition (somewhere in the NACE transaction).
Changing the purchase order (ME22N) should create a different output type (-> ORDCHG IDoc). The first output ZSND must not be repeated (or it is defined to be set automatically only once).
Thus, there are two explanations for your observation:
(1) The output ZSND is not created a second time using ME22N
(2) The new output (-> ORDCHG) has not been assigned to the VOFM condition 901.
(1) you can test quite easily by adding the ZSND output manually in transaction ME22N.
(2) you need to check the output customizing.
Regards
Uwe

Add Line to Existing PO: via "BAPI_PO_CHANGE" or something else ????

Can I use "BAPI_PO_CHANGE" to add a line item to a PO?
In particular, if I call this BAPI with rows in "poitem" that don't correspond to line items already in the PO, will the BAPI add these new lines?
If not, what is the right way to do this via BAPI?
Thanks for any advice you can provide.

TYPES : BEGIN OF ty_ekko,
         ebeln TYPE ebeln,
         ekorg TYPE ekorg,
         ekgrp TYPE bkgrp,
       END OF ty_ekko.
DATA : it_flatfile TYPE TABLE OF ty_ekko ,
       wa_flatfile TYPE ty_ekko,
       it_ekko1 TYPE TABLE OF ty_ekko,
       wa_ekko1 TYPE ty_ekko.
DATA : v_file TYPE string.
DATA : wa_header TYPE bapimepoheader,
       wa_headerx TYPE bapimepoheaderx.
DATA: it_return TYPE TABLE OF bapiret2.
DATA: it_return1 TYPE TABLE OF bapiret2.
*DATA : BEGIN OF it_bapi_poheader OCCURS 0.
       INCLUDE STRUCTURE bapimepoheader.
*DATA : END OF it_bapi_poheader.
*DATA : BEGIN OF it_bapi_poheaderx OCCURS 0.
       INCLUDE STRUCTURE bapimepoheaderx.
*DATA : END OF it_bapi_poheaderx.
*DATA : BEGIN OF it_bapi_poitem OCCURS 0.
       INCLUDE STRUCTURE bapimepoitem.
*DATA : END OF it_bapi_poitem.
*DATA : BEGIN OF it_bapi_poitemx OCCURS 0.
       INCLUDE STRUCTURE bapimepoitemx.
*DATA : END OF it_bapi_poitemx.
*DATA : BEGIN OF it_bapireturn OCCURS 0.
       INCLUDE STRUCTURE bapiret2.
*DATA : END OF it_bapireturn.
PARAMETERS : p_file TYPE ibipparms-path.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
CALL FUNCTION 'F4_FILENAME'
    IMPORTING
      file_name = p_file.
START-OF-SELECTION.
MOVE p_file TO v_file.
CALL FUNCTION 'GUI_UPLOAD'
    EXPORTING
      filename            = v_file
      has_field_separator = 'X'
    TABLES
      data_tab            = it_flatfile.
IF NOT it_flatfile IS INITIAL.
    SELECT ebeln ekorg ekgrp
           FROM ekko
           INTO TABLE it_ekko1
           FOR ALL ENTRIES IN it_flatfile
          WHERE ebeln = it_flatfile-ebeln .
ENDIF.
LOOP AT it_flatfile INTO wa_flatfile.
    READ TABLE it_ekko1 INTO wa_ekko1 WITH KEY ebeln = wa_flatfile-ebeln.
    IF sy-subrc EQ 0.
      IF wa_flatfile-ekorg NE wa_ekko1-ekorg OR
         wa_flatfile-ekgrp NE wa_ekko1-ekgrp.
       wa_header-po_number = wa_flatfile-ebeln.
        wa_header-purch_org = wa_flatfile-ekorg.
        wa_header-pur_group = wa_flatfile-ekgrp.
       wa_headerx-po_number = wa_flatfile-ebeln.
        wa_headerx-purch_org = 'X'.
        wa_headerx-pur_group = 'X'.
      ENDIF.
    ENDIF.
    CALL FUNCTION 'BAPI_PO_CHANGE'
      EXPORTING
        purchaseorder                = wa_ekko1-ebeln
        poheader                     = wa_header
        poheaderx                    = wa_headerx
POADDRVENDOR                 =
TESTRUN                      =
MEMORY_UNCOMPLETE            =
MEMORY_COMPLETE              =
POEXPIMPHEADER               =
POEXPIMPHEADERX              =
VERSIONS                     =
NO_MESSAGING                 =
NO_MESSAGE_REQ               =
NO_AUTHORITY                 =
NO_PRICE_FROM_PO             =
IMPORTING
EXPHEADER                    =
EXPPOEXPIMPHEADER            =
TABLES
   return                       = it_return
POITEM                       =
POITEMX                      =
POADDRDELIVERY               =
POSCHEDULE                   =
POSCHEDULEX                  =
POACCOUNT                    =
POACCOUNTPROFITSEGMENT       =
POACCOUNTX                   =
POCONDHEADER                 =
POCONDHEADERX                =
POCOND                       =
POCONDX                      =
POLIMITS                     =
POCONTRACTLIMITS             =
POSERVICES                   =
POSRVACCESSVALUES            =
POSERVICESTEXT               =
EXTENSIONIN                  =
EXTENSIONOUT                 =
POEXPIMPITEM                 =
POEXPIMPITEMX                =
POTEXTHEADER                 =
POTEXTITEM                   =
ALLVERSIONS                  =
POPARTNER                    =
POCOMPONENTS                 =
POCOMPONENTSX                =
POSHIPPING                   =
POSHIPPINGX                  =
POSHIPPINGEXP                =
POHISTORY                    =
POHISTORY_TOTALS             =
POCONFIRMATION               =
    CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
ENDLOOP.
You can test it in your dev using my code . Pls check and let us know.

User exit to change vendor e-mail address used for PO output via e-mail...

We have two vendor e-mail addresses for a particular vendor. Ignoring output determination, it looks like I will need to control which of the two e-mail vendor addresses is used when the PO is output via e-mail.
The default is the first one e-mail address, but for PO's I would like to force the second vendor e-mail address.
There are tonnes of exits available for PO output by the looks of it so I am trying to discover which is relevant for what I am trying to achieve.
Jas
Edited by: Jason Stratham on Apr 30, 2009 5:53 PM

Thanks Martin,
I guess that's the same path that I took earlier when using SPRO and looking at the Purchasing->Messages. In my case it's ZMEDRUCK, but that does not help me in regards to controlling the vendors e-mail address being used. When sending the PO as an e-mail it uses (by default) the first e-mail address of the Vendor, whereas the vendor could have multiple ones. In my test case my vendor has two addresses but it always defaults to using the first. I know that I need to modify this behaviour somehow, but how I have no idea as I can find no Exit routine.
Jas

How can I add a new line item for production order?

HI all,
How can I add a new line item for production order through BAPI/FM? Thanks in advance.

Hi Mil,
Unfortunetly SAP is not in front of me.
But if possible go to BAPI transaction , check for any production order's bapi for CHANGE purpose. Where you will be able to add your new line.
Reward if useful!

When I open up an e-mail attachment a box pops up PRINT TO FILE below that line OUTPUT FILE NAME with an empty line for the file name vs. simply going to my default printer?

when I open up an e-mail attachment a box pops up PRINT TO FILE below that line OUTPUT FILE NAME with an empty line for the file name vs. simply going to my default printer?

Make sure that '''''Print to File''''' isn't selected in the native print dialog box ''(see screenshot below)'' middle-right, and make sure your Printer is selected at the top of that dialog box.
''I'm a little confused why an email attachment would need to go directly to the printer, but that's what you asked about.''

Output Control Routine for Order Confirmation

Hi,
I have a problem in sending out order confirmation when the customer have a credit block, no order confirmation is being sent.
Checked on transaction NACE, the routine for Order Confirmation (Routine 2), returns a sy-subrc =4
when the credit block is set. What is the best way to correct this?
Thanks,
Catherine

Create the new routine in VOFM->Requirement->Output Control. Make the required changes in routine source text and assign it to output procedure (NACE).
Thank You,
Ganesh

Is there a REQ line on DAQCard DIO-24 for handshaked output?

Trying to use DAQCard DIO-24 for handshaked output using LabView 6.1 on Mac. I was looking at the signal diagrams and didn't see any line in Port C (the control port) that was specifically labeled as a REQ signal.

I figured it out. For those who might have a similar question:
1. If you're doing digital input, wire up your 'trigger' signal to the strobe pin for the appropriate port.
2. If you're doing digital output, wire up your 'trigger' signal to the ACK pin for the appropriate port.
Regards,
Jejo Koola

How to test VOFM routine for output cntrol-issue o/p when certain conds met

Hai,
I have created a vofm routine 903 for the output type 'ZSH1'.This is for sales order output.
The 903 routine changes the sy-subrc value to non zero if certain conditions met.
My doubt is how to test this vofm routine? where can we check the status of the output processed?
This output is to trigger a smartform.
In my case the output smart form got displayed when I click on print preview even if the condtions met (or) dont met.
Is this the correct way of testing?
Regards,
Bhaskar

Hai All,
Thanks for your replies.
here my question is,
how to test the VOFM (not manual )& where we can check the status of output issued or not issued?
see the step 1.
Step1: goto->va02->from the menu select 'issue output'->select the codition type in the displayed popup->click OK.
after this where can I check the status of the output issued?
or is the way I described in Step 1 is correct or not ?
other way Step 2:
goto VA02->enter order number->goto overview page->from Extras->output->header->edit
in this page maintain the output type & click Save.
after Save , is this the time to check whether the output issued or not? if yes where to check the status?
or again is this the right way to test the VOFM.
Regards,
Bhaskar
Edited by: Mbhaskar_comps on Dec 15, 2010 7:00 AM

Using `n how can i add two empty line (two carriage return), between these two lines in the output file?

hi friends
using `n how can i add two empty line (two carriage return), between these two lines in the output file?
PS C:\> $env:COMPUTERNAME | add-content c:\file.txt
PS C:\> $Env:USERDOMAIN | add-content c:\file.txt
i tested "$env:computername`n`n`n$env:userdomain" | add-content c:\file.txt but it results in
myPCMyDomain
but i wanted the contents of the output file be like this:
MyPC
#empty line here
#empty line here
MyDomain
i tested many other forms but didn't work.
thanks

I tried it, as well. The line breaks were respected in the PowerShell console, Programmer's Notepad, and Word; they weren't in Notepad.
You are using a Unicode file. Locale is what?
If you just want notepad compatible line breaks then do this:
del file.txt ; "$env:computername`r`n`r`n`r`n$env:userdomain" | add-content file.txt ;notepad file.txt
Look in hex to see that `n is ^L or 0xA and is only one character. CrLf is 0xD 0xA - two characters.
My programmers editors and VS all understand a single ^L as a line break so does PowerShell. Only DOS/Notepad and other utilitis don't understand this..
¯\_(ツ)_/¯

Add routine for line output in ME55 via OMGK

Similar Messages

Maybe you are looking for