Adding custom build step after each compilation

Using Freescale's Kinetis Design Studio, based on Luna 4.4.2, with CDT 8.6.0.201502131403.
I have GCC configured to spit out an assembly listing, e.g., foo.o.lst, but since it is 99% crud, I wrote a program to clean it up, leaving just the disassembly. Is there a way to get this program executed right after every compile? The project "Build Steps" only seem to apply to the entire build, not the individual compilations.

http://help.eclipse.org/mars/index.jsp?topic=%2Forg.eclipse.cdt.doc.user%2Freference%2Fcdt_u_fileprop_steps.htm
RTFM + FAQ:

Similar Messages

  • Reload source file after custom build step

    Hello,
    I use a source code generator that creates c-code (i.e. hello.c) from some kind of definition file.
    I want the generator to create hello.c on each build, so i have decided to put a batch (that calls the generator) into the "custom build step" of my project.
    This way the generator is called before each build.
    Unfortunatly CVI does not reload the changed hello.c after it has been modified/overwritten by the batch... the build is done with the previous version of hello.c. Not until the build is finished CVI recognizes that hello.c has been modified and prompts "Update Window from Disk", then I have to run a second build in order to get the changes of hello.c applied.
    How can I accomplish to have only build process that first calls the generator and then compiles the project (with modified hello.c)?
    Thanks

    The problem happens because you have the file open in CVI. If a file is opened in CVI, then CVI uses the contents that are available in the opened window and not the contents on disk. Also, once CVI starts a build it does not monitor changes to the file on disk - consider what should happen if the file on disk changes while it is being compiled. So while the custom build step does overwrite the file on disk, CVI uses the contents that are in the source window for the compilation. To avoid this problem, make sure the file is not opened in CVI when you build - this will make CVI load and compile the file from disk after the custom build step overwrites it.

  • "Performing Custom Build Step"-Reg.

    Dear All,
    I am the new person in Plug-In creation, now i start the "Basic-Dialog" program and compile in VC++ software, but they shows the below error:
    'odfrc' is not recognized as an internal or external command,
    operable program or batch file.
    Project : error PRJ0019: A tool returned an error code from "Performing Custom Build Step"
    So please any one can help me!....
    Regards
    T.R.Harihara SudhaN

    Dear Charles Anderson
    Many Thanks for the informations and useful guide,
    and please help me!
    I added the below as you told paths:
    "Tools | Options. Go to Projects, then VC++ Directories. In the "Show Directories for" dropdown list, select "Executable Files". Add the directory containing odfrc"...
    First I clarify to you... I am using the MicroSoft Visual Studio. NET 2003, using the VC++ compiler...
    I am adding the ODFRC file in the executable files, But same error shown in the Output Window. So please give me the solutions.
    I am waiting for your solutions.
    Thanks & Regards
    T.R.Harihara SudhaN

  • Error during Custom Build - error PRJ0019: A tool returned an error code from "Performing Custom Build Step"

    Hi All,
    I was trying to develop C++ web service using GShop with Visual Studio 2005.I refered a tutorial :-
    http://guruce.com/blogpost/hosting-webservices-on-windows-embedded-compact-windows-ce-using-gsoap .
    AS per the tutorial i proceeded. But, i stuck-up when making a custom build with Helloworld.wsdl.Here is the output :
    1>------ Rebuild All started: Project: HelloWorldWebService, Configuration: Debug Pocket PC 2003 (ARMV4) ------
    1>Deleting intermediate and output files for project 'HelloWorldWebService', configuration 'Debug|Pocket PC 2003 (ARMV4)'
    1>Performing Custom Build Step
    1>'D:\Test' is not recognized as an internal or external command,
    1>operable program or batch file.
    1>Project : error PRJ0019: A tool returned an error code from "Performing Custom Build Step"
    1>Build log was saved at "file://d:\Test Code\HelloWorldWebService\HelloWorldWebService\Pocket PC 2003 (ARMV4)\Debug\BuildLog.htm"
    1>HelloWorldWebService - 1 error(s), 0 warning(s)
    ========== Rebuild All: 0 succeeded, 1 failed, 0 skipped ==========
    As given in the tutorial i kept my custom build command line as : -
    $(SolutionDir)\gsoap-2.8\gsoap\bin\win32\wsdl2h.exe -s $(InputPath) -o $(ProjectDir)$(InputName).h
    and outpouts : $(InputName).h
    I kept GSHOP in the project filder :- D:\Test Code\HelloWorldWebService
    Kindly help.
    Jyotiranjan

    Hi Jyotiranjan,
    I’m glad to hear that you got it working.
    Thank you for sharing your solutions
    experience here. It will be very beneficial for other community members who
    have similar questions.
    Best regards,
    Lucy
    Lucy Liu [MSFT]
    MSDN Community Support | Feedback to us
    Get or Request Code Sample from Microsoft
    Please remember to mark the replies as answers if they help and unmark them if they provide no help.

  • MSVC V5.0 IDE and CINs - custom build ??

    Hi everyone,
    does anyone know how to solve the "custom build" problem under NT?
    When I try to build the LVS-file Visual stops at "performing custom
    build step" with an error.
    I've read the CIN reference manual, NI's knowledge base article
    1F3ARTNV, MS's knowledge base article Q191495 and I've tried copying
    various files to directories without long file names (just think about
    it... Windows NT can't handle long filenames...).
    I'd like to avoid postprocessing the DLL manually (so sad, so sad)!
    TIA
    Bernhard
    Sent via Deja.com http://www.deja.com/
    Share what you know. Learn what you don't.

    Ray;
    For some strange reason sometimes the custom step cause a lot of troubles when implemented in VC++. I created a small VI just to implement the custom step. You can downloaded from here:
    http://www.visecurity.com/tools.shtml
    Look for the VI called CIN Custom Step
    I hope this helps.
    Regards;
    Enrique
    www.vartortech.com

  • Reading the output values after each step executes in LabVIEW User Interface

    Hello all,
    Development environment: TestStand 2010 SP1 and LabVIEW 2010 SP1
    Problem: is there a way to execute the subsequent steps programatically and get the output values from each of them?
    I have already extended a little bit a Full OI interface for TestStand to load up any sequence, choose some of the steps and run them step by step (something like option to Run Selected steps). What I am trying to do is to add some actions between each step and do that in User Interface (I can't modify the sequence!), so I am starting the NewExecution with some previously configured InteractiveArgsParam and set an option breakAtFirstStep to True. Afterwards I am just doing something like Step Over when debugging the sequence and this works good, but I didn't fine a way yet to read the output values from the steps...
    Then, if I wait until the execution finishes I can read my Results by processing the ResultObject, but this works only after finalizing of the test sequence. Since I wanted to stop after each step, read the values, do some actions and continue to the next step I tried to register an event callback for Trace of Execution View Manager. I can see that after each executed step this event is triggered, but when I try to read a ResultObject returned in Event Data it is not filled with values (ResultList seems to be empty?). Is it a proper behaviour or maybe I am doing the readout in wrong way? (It is the same VI as for reading ResultObjects after sequence finishes and there it works fine for arrays, containers and other data types).
    Like I mentioned I can't modify the Test sequences, I can't add a UImessages.
    What are my options? Should the trace event returns all output values from each steps or is it just used for status checking? Or maybe there is completely different approach to that matter?
    Thanks in advance for any suggestions,
    Best Regards.
    CLA, CTD, CLED @ Test & Measurements Solutions Poland
    Solved!
    Go to Solution.

    Thanks for your replay, I have tried to build it in my LabView Block Diagramm, es seems like this image.
    But the variable GetNumSubProperties ist always 0. Why?
    PS: I need only the variable "Step.Result.PassFail" from the last step, do you know, how can I get it? I think, it is maybe easier than read all the "Result".
    Attachments:
    ReadStepResultInLabview.JPG ‏39 KB

  • "500 internal server error" after adding custom fields to Address page

    I need to display custom fields on the "Addresses" and the "Personal Data" pages. For that, we added custom CI_INCLUDE fields in both PA0006 and PA0002 tables as per instructions below
    https://www.sdn.sap.com/irj/scn/wiki?path=/display/profile/essPersonalInformationUIenhancementwithoutmodification&focusedCommentId=28278867
    we also extended the Badi HRPAD00INFTYUI
    custom fields show up OK in page "Personal Data". However when trying to browse to page "Addresses"
    we get the following error:
    "500 internal server error - com.sap.tc.webdynpro.progmodel.context.ContextException: MappedNodeInfo(DetailView.SelectedInfotype): unknown child node Area8 ".
    "Area8" is one of the custom fields we added in PA0006 (Address infotype).
    any idea what is wrong?  maybe Badi HRPAD00INFTYUI cannot handle 2 infotypes in the same time?
    T.

    Hi Sasu,
    Its clearly saying contect binding error. Have you mapped  correctly from FcComponent to VcComponents.
    FcCompoenets for Model logic.
    Check the mappings correctly.
    If it is complete custom or new field then there will be could of steps.
    1) Reimport the model
    2) map new field to FcComponent
    3) Bind new Fields from Fc to Vc
    Rgds
    -SS

  • When paste to vim xterm, blanks lines are added after each line

    Need expert's help:
    When I copy from windows Firefox to my vnc's vim xterm, somehow after each line, several blank lines are added after every single line/paragraph. This is really annoying!
    I don't know how to solve it. I changed a my .vimrc to a very simple one, still not working.
    thanks!
    Qian

    You may have a fileformat problem.  I'm pretty sure this will work but I only did one small test.
    To display the current vim fileformat – this should return either 'dos' or 'unix'.
    :set ff
    Vim usually correctly sets the fileformat automatically upon opening a file but will default to using 'unix' if the format can't be determined.  After pasting the text, try the command,
    :update
    'update' will save the file only if changes to the buffer have occurred.  This command may change the fileformat and all the line endings are now CR-LFs (CR=carriage return; LF=line feed).  Check the fileformat again with
    :set ff
    If ':update' didn't change the line endings, or the file is now a mix of CR-LFs and LF-only line endings, try this,
    :e! ++ff=dos
    This should force rereading the buffer as a dos (Windows) format and properly display the lines. All line endings should now be CR-LF.  You can then manually set the fileformat to 'unix' with
    :set ff=unix
    and finally, save the file with
    :w

  • Deploying manually CC PKG file built with CC Packager. Not using any third party deployment tool. However after each 5 installations, the PKG files corrupt and cannot be use for a 6th installation. I have to build a new PKG file using CC packager.  Why ?

    Deploying manually CC PKG file built with CC Packager. Not using any third party deployment tool. However after each 5 installations, the PKG files corrupt and cannot be use for a 6th installation. I have to build a new PKG file using CC packager.  Why ?

    http://helpx.adobe.com/creative-cloud/packager.html
    http://forums.adobe.com/community/download_install_setup/creative_suite_enterprise_deploym ent

  • Adding Custom Labels Missing for Contact Numbers After Upgrading to iOS 8.0 and issue still exists on iOS 8.1

    I noticed that after upgrading to iOS 8.0 on my iPhone 5s, adding custom labels for contact numbers got removed. It still exists on iOS 8.1 as well. Is there someone who is facing a similar issue or can someone help me how to get that back. Any suggestions would be greatly appreciated.
    Thank you.

    Hi Yugendra,
    Thanks for visiting Apple Support Communities.
    I have good news. You can still choose a custom label in Contacts on iOS 8. The option should be below "Other" in the list of labels when editing a contact. This information is found in the iOS 8 user guide:
    Contacts at a glance - iPhone
    Change a label. If a field has the wrong label, such as Home instead of Work, tap Edit. Then tap the label and choose one from the list, or tap Add Custom Label to create one of your own.
    Best Regards,
    Jeremy

  • Spooling a file adding spaces after each line

    Hi
    I am spooling a result of an sql in a csv file in linux os. But the file generates lot of blank lines after each row. How this can be eliminated while spooling
    Thanks in advance
    Sas

    Thanks a lot for your reply. Is there any way to supress the display of query result. I dont want to see the result. I want just the output file.
    Thanks
    Sas
    Edited by: SasDutta on Mar 24, 2010 4:20 PM

  • Old operating systems allowed you to click on recipients when sending emails without adding a comma after each address. Now with the new and improved system, I have to stop and add a comma after each name. How can I avoid this?

    With the new OSX system, whenever I send an email with multiple recipients, I need to physically add a comma after each address. I never needed to do that with all the other older systems, it was done automatically. How can I fix this frustrating glitch?

    option discovered in preferences. Really this and any feature that moves deletes or edits a users data should as far as possible be OFF BY DEFAULT. It shouldn't by default and without the users specific say do this dangerous and unnecessary thing without even letting the user know what it's doing!!! And then cause me a few hours (as i'm new to mac) searching for the option so as to switch it off. If i hadn't noticed the status cage declaring that it was copying files then i might never have twigged that this insane thing was occurring. And if i hadn't of noticed i would have been left maintaining the contents of the folder i copied the files to, the folder which as far as i was informed and so believed was also the location of the music files i was playing. How does Apple justify this 'genius' piece of software non-design? Surely it will hurt no one if this was off by default for new users - overall at least i dare say it would cause a lot less distress in the future for the unsuspecting public at large. Thanks for the support.

  • [svn:fx-trunk] 10459: Change to ensure ScriptNodes are no longer part of the node tree after interface compilation stage in order to avoid the extra code that was necessary to avoid tripping over them during type checking , etc.

    Revision: 10459
    Author:   [email protected]
    Date:     2009-09-21 08:42:44 -0700 (Mon, 21 Sep 2009)
    Log Message:
    Change to ensure ScriptNodes are no longer part of the node tree after interface compilation stage in order to avoid the extra code that was necessary to avoid tripping over them during type checking, etc.
    Improving revision 10199 a bit, to allow for single line comments.
    QE notes: None
    Doc notes: None
    Bugs: SDK-22027
    Reviewer: Paul
    Tests run: Checking, Compiler cyclones
    Is noteworthy for integration: No
    Ticket Links:
        http://bugs.adobe.com/jira/browse/SDK-22027
    Modified Paths:
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/as3/AbstractSyntaxTreeUtil.java
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/InterfaceCompiler.java
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/builder/AbstractBuilder.java
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/builder/DocumentBuilder.java

    In general theory, one now has the Edit button for their posts, until someone/anyone Replies to it. I've had Edit available for weeks, as opposed to the old forum's ~ 30 mins.
    That, however, is in theory. I've posted, and immediately seen something that needed editing, only to find NO Replies, yet the Edit button is no longer available, only seconds later. Still, in that same thread, I'd have the Edit button from older posts, to which there had also been no Replies even after several days/weeks. Found one that had to be over a month old, and Edit was still there.
    Do not know the why/how of this behavior. At first, I thought that maybe there WAS a Reply, that "ate" my Edit button, but had not Refreshed on my screen. Refresh still showed no Replies, just no Edit either. In those cases, I just Reply and mention the [Edit].
    Also, it seems that the buttons get very scrambled at times, and Refresh does not always clear that up. I end up clicking where I "think" the right button should be and hope for the best. Seems that when the buttons do bunch up they can appear at random around the page, often three atop one another, and maybe one way the heck out in left-field.
    While I'm on a role, it would be nice to be able to switch between Flattened and Threaded Views on the fly. Each has a use, and having to go to Options and then come back down to the thread is a very slow process. Jive is probably incapable of this, but I can dream.
    Hunt

  • Added custom screen in PO using BADI ME_GUI_PO_CUST and ME_PROCESS_PO_CUST

    Hi All,
    I have added custom screen with two z fields at item level using BADI ME_GUI_PO_CUST and ME_PROCESS_PO_CUST i can see my screen in tcodes ME21N , ME22N , ME23N but I am not able to save data.
    and also screen is coming in change mode even in ME23N .
    thanks.

    Hi,
    I have added two xfields at item level.
    This is the code i have added in zimplementation ZME_GUI_PO_CUST .
    IN Zimplementation ME_PROCESS_PO_CUST I have added code only in method FIELDSELECTION_ITEM . after doing this I can see only screens in ME21N, ME22N, ME23N but when enter data in zfields and trying to save it is giving me message no data has changed.
    method IF_EX_ME_GUI_PO_CUST~SUBSCRIBE.
    DATA: ls_subscriber LIKE LINE OF re_subscribers.
    we want to add a customer subscreen on the item detail tab
      CHECK im_application = 'PO'.
      CHECK im_element     = 'ITEM'.
    each line in re_subscribers generates a subscreen. We add one subscreen in this example
      CLEAR re_subscribers[].
    the name is a unique identifier for the subscreen and defined in this class definition
      ls_subscriber-name = subscreen1.
    the dynpro number to use
      ls_subscriber-dynpro = '0001'.
    the program where the dynpro can be found
      ls_subscriber-program = 'SAPLYMEPOBADIEX'.
    each subscreen needs his own DDIC-Structure
      ls_subscriber-struct_name = 'MEPO_BADI_STRUCT'.
    a label can be defined
      ls_subscriber-label = text-001.
    the position within the tabstrib can be defined
      ls_subscriber-position = 4.
    the height of the screen can be defined here. Currently we suport two screen sizes:
    value <= 7 a sevel line subscreen
    value > 7  a 16 line subscreen
      ls_subscriber-height = 7.
      APPEND ls_subscriber TO re_subscribers.
      ENDIF.
    method IF_EX_ME_GUI_PO_CUST~TRANSPORT_FROM_MODEL.
      DATA: l_item       TYPE REF TO if_purchase_order_item_mm,
            ls_mepoitem  TYPE mepoitem,
            ls_customer  TYPE mepo_badi_exampl.
    system asks to transport data from the business logic into the view
      CASE im_name.
        WHEN subscreen1.
    is it an item? im_model can be header or item.
          mmpur_dynamic_cast l_item im_model.
          CHECK NOT l_item IS INITIAL.
    transport standard fields
          ls_mepoitem = l_item->get_data( ).
    transport customer fields
          CALL FUNCTION 'YMEPOBADIEX_GET_DATA'
            EXPORTING
              im_ebeln = ls_mepoitem-ebeln
              im_ebelp = ls_mepoitem-ebelp
            IMPORTING
              ex_data  = ls_customer.
    store info for later use
          MOVE-CORRESPONDING ls_mepoitem TO dynp_data_pbo.
          MOVE ls_customer-badi_bsgru TO dynp_data_pbo-badi_bsgru.
          MOVE ls_customer-badi_afnam TO dynp_data_pbo-badi_afnam.
        WHEN OTHERS.
      ENDCASE.
    endif.
    method IF_EX_ME_GUI_PO_CUST~TRANSPORT_TO_DYNP.
      CASE im_name.
        WHEN subscreen1.
          CALL FUNCTION 'YMEPOBADIEX_PUSH'
            EXPORTING
              im_dynp_data = dynp_data_pbo.
        WHEN OTHERS.
      ENDCASE.
    ENDIF.
    endmethod.
    method IF_EX_ME_GUI_PO_CUST~TRANSPORT_FROM_DYNP.
      CASE im_name.
        WHEN subscreen1.
          CALL FUNCTION 'YMEPOBADIEX_POP'
            IMPORTING
              ex_dynp_data = dynp_data_pai.
          IF dynp_data_pai NE dynp_data_pbo.
    something has changed therefor we have to notify the framework
    to transport data to the model
            re_changed = mmpur_yes.
          ENDIF.
        WHEN OTHERS.
      ENDCASE.
    ENDIF.
    endmethod.
    method IF_EX_ME_GUI_PO_CUST~TRANSPORT_TO_MODEL.
    DATA: l_item       TYPE REF TO if_purchase_order_item_mm,
            ls_mepoitem  TYPE mepoitem,
            ls_customer  TYPE mepo_badi_exampl.
    data have to be transported to business logic
      CASE im_name.
        WHEN subscreen1.
    is it an item? im_model can be header or item.
          mmpur_dynamic_cast l_item im_model.
          CHECK NOT l_item IS INITIAL.
          ls_mepoitem = l_item->get_data( ).
    standard fields changed?
         IF dynp_data_pbo-matkl NE dynp_data_pai-matkl OR
            dynp_data_pbo-plifz NE dynp_data_pai-plifz OR
            dynp_data_pbo-webaz NE dynp_data_pai-webaz.
    update standard fields
           ls_mepoitem-matkl = dynp_data_pai-matkl.
           ls_mepoitem-plifz = dynp_data_pai-plifz.
           ls_mepoitem-webaz = dynp_data_pai-webaz.
            CALL METHOD l_item->set_data( ls_mepoitem ).
         ENDIF.
            CALL FUNCTION 'YMEPOBADIEX_GET_DATA'
              EXPORTING
                im_ebeln = ls_mepoitem-ebeln
                im_ebelp = ls_mepoitem-ebelp
              IMPORTING
                ex_data  = ls_customer.
            ls_customer-badi_bsgru = dynp_data_pai-badi_bsgru.
            ls_customer-badi_afnam = dynp_data_pai-badi_afnam.
            CALL FUNCTION 'YMEPOBADIEX_SET_DATA'
              EXPORTING
                im_data = ls_customer.
         ENDIF.
        WHEN OTHERS.
      ENDCASE.
    ENDIF.
    method IF_EX_ME_PROCESS_PO_CUST~FIELDSELECTION_ITEM.
    DATA: l_persistent TYPE mmpur_bool.
    CONSTANTS:
    FIELD-SYMBOLS: <fs> LIKE LINE OF ch_fieldselection.
    l_persistent = im_item->is_persistent( ).
    *IF l_persistent EQ mmpur_yes.
    READ TABLE ch_fieldselection ASSIGNING <fs> WITH TABLE KEY
                         metafield = MMMFD_YYMAN_NUM."fd_cust_01.
    IF sy-subrc IS INITIAL.
    <fs>-fieldstatus = '*'. " Display <-- this one was as per the sample code given.
    <fs>-fieldstatus = '+'. " Input <-- this i added to make the field mandatory.
    ENDIF.
    READ TABLE ch_fieldselection ASSIGNING <fs> WITH TABLE KEY
                         metafield = MMMFD_YYMAN_DES."fd_cust_01.
    IF sy-subrc IS INITIAL.
    <fs>-fieldstatus = '*'. " Display <-- this one was as per the sample code given.
    <fs>-fieldstatus = '+'. " Input <-- this i added to make the field mandatory.
    ENDIF.
    *ENDIF.
    ENDIF.
    endmethod.

  • Ipod stops after each track ends in a playlist?

    I have a problem: Suddenly, my ipod stops after each track ends in a playlist.  This happens with every playlist and every track, all of which worked fine until this week.  All tracks' settings are "yes" on 1) part of a compilation; 2) remember playback position and; 3) skip when shuffling.  I have not updated any software or added any new content to my ipod.  I imagine that some setting has been switched on or off, but I am unable to identify which one.  Please help as these are my audio books!  Thanks!
    nano 6th gen

    Yilofall wrote:
    I have an iPod Classic (I am fairly new to the medium) and when playing music the Pod goes smoothly from one song to the next but, when listening to a book (brought in from a CD copied into iTunes) it plays one track and stops.
    See below for a link on how to copy a CD into iTunes if you want an Audibook.
    I have tried checking the gap less album box (what is that for by the way) but it makes no difference.
    If you've heard of Dark Side of The Moon by Pink Floyd then it's used there when you want no break between tracks. Or any DJ mixed continuos play CD. Or some classical music. Take your pick
    Third question, can I make a book copied into iTunes an Audiobook? How?
    [How to Import Audio CD audiobooks into iTunes|http://aldoblog.com/audiobooks/itunes/importing-audio-cds>
    Thank you!
    No problem, hang around and read a few posts, there's always plenty to learn in here.
    Regards,
    Colin R.

Maybe you are looking for