Adding wireless to the Network

Question

Hi All
I currently have a lab in place where I am using multiple Vlans with different Ip ranges using SVI's
I want to add a stand alone AP with the core switch a cting as the DHCP server.
i have 2 vlans 10.8.5.0/24 10.8.6.0/24 I have reserved the 1st 10 address in each ranges.
Gateways vlan 5 10.8.5.1/24
               vlan 6 10.8.6.1/24         
I want to configure a trunk port on the switch for the AP to connect to
ap(config)#Dot11 ssid HR
ap(config-ssid)#authentication open
ap(config-ssid)#guest-mode
ap(config-ssid)#exit
ap(config)#Dot11 ssid staff
ap(config-ssid)#authentication open
ap(config-ssid)#guest-mode
ap(config-ssid)#exit
Do I simply just need to configure sub interfaces on the radio's and the physical interface using
encapsulation dot1q 5
encapsulation dot1q 6
and adding the bridge groups in on both sets of interfaces.
add the BVI 1 interface 10.8.5.9
will this be enough to get me going ???
Thanks
Will this be

Answer 1

Hi Amjad
I have another dilema
I can connect to the Vlan 6 ID DE-BO no problem I get the correct IP address and I can get internet connection.
However the Vlan 5 UK-BO (native) I cannot get an address and no internet connection.
Is it possibly something to do with it being Native
I have allowed all vlans on the trunk port at the switch end. Please see the config below
version 12.4
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
logging rate-limit console 9
enable secret 5 $1$I5/V$FSTi6anwaUrW3CXUwlKUX/
no aaa new-model
dot11 mbssid
dot11 syslog
dot11 ssid DE-BO
   vlan 6
   authentication open
   mbssid guest-mode
dot11 ssid UK-BO
   vlan 5
   authentication open
   mbssid guest-mode
bridge irb
interface Dot11Radio0
no ip address
no ip route-cache
ssid DE-BO
ssid UK-BO
antenna gain 0
speed  basic-1.0 2.0 5.5 11.0 6.0 9.0 12.0 18.0 24.0 36.0 48.0 54.0 m0. m1. m2. m3. m4. m5. m6. m7. m8. m9. m10. m11. m12. m13. m14. m15.
channel 2437
station-role root
interface Dot11Radio0.1
encapsulation dot1Q 5 native
no ip route-cache
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
bridge-group 1 spanning-disabled
interface Dot11Radio0.2
encapsulation dot1Q 6
no ip route-cache
bridge-group 6
bridge-group 6 subscriber-loop-control
bridge-group 6 block-unknown-source
no bridge-group 6 source-learning
no bridge-group 6 unicast-flooding
bridge-group 6 spanning-disabled
interface Dot11Radio1
no ip address
no ip route-cache
shutdown
antenna gain 0
no dfs band block
channel dfs
station-role root
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
bridge-group 1 spanning-disabled
interface GigabitEthernet0
no ip address
no ip route-cache
duplex auto
speed auto
no keepalive
interface GigabitEthernet0.1
encapsulation dot1Q 5 native
no ip route-cache
bridge-group 1
no bridge-group 1 source-learning
bridge-group 1 spanning-disabled
interface GigabitEthernet0.2
encapsulation dot1Q 6
no ip route-cache
bridge-group 6
no bridge-group 6 source-learning
bridge-group 6 spanning-disabled
interface BVI1
ip address 10.11.0.15 255.255.255.0
no ip route-cache
ip http server
ip http authentication local
ip http secure-server
ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
bridge 1 route ip
line con 0
line vty 0 4
login local
end
sh ip int brief
Interface                  IP-Address      OK? Method Status                Protocol
BVI1                       10.11.0.15      YES manual up                    up     
Dot11Radio0                unassigned      YES NVRAM  up                    up     
Dot11Radio0.1              unassigned      YES unset  up                    up     
Dot11Radio0.2              unassigned      YES unset  up                    up     
Dot11Radio1                unassigned      YES NVRAM  administratively down down   
GigabitEthernet0           unassigned      YES NVRAM  up                    up     
GigabitEthernet0.1         unassigned      YES unset  up                    up     
GigabitEthernet0.2         unassigned      YES unset  up                    up