Additional cost of land

How to post the addtional cost of land?
The accounting entries is : Dr. Cost-Land Property Development
Cr. Amount Payable-To Related Company
I'm not so sure on the execution i.e what T-Code to use and what T-type to use.
It is really approppriate to record it as external asset acquisition?
What is the impact on the reporting for acquisition?
Please advice further on the impact of using t-code n t-type.
Thank You.

Hi Z,
If we use T-code ABZON, the accounting entries will be:
Dr. 43010000 (Land Held for Development)
Cr. 91050100 (Asset Acq. Contra)
The accounting entries that we want is :
Dr. 43010000 (Land Held for Development)
Cr. 21020301 (Amount Payable to Related Companies).
What happen if we use T-code=FB01 and T-type=100?
Can you explain detail about the impact of using this t-code and t-type .
Thank You.

Similar Messages

Additional costs while the product is at your warehouse...how to link?

Hello experts,
I was wondering if SAP lets you add costs to lots after they have been recieved to a particular warehouse.
Example:
We recieved a shipment containing 2 lot numbers. Once is in our warehouse, we performed an additional lab test to one of the lot numbers. So how do you vinculate this additional costs to the lot? What options do I have to affect the inventory value with the correct information?
Kind regards

Hello Gordon,
I have tested but landed costs is a complex alternative.
If I want to base the new landed costs on the original Landed Cost Document, there is a problem with the warehouse allocation. At the inital Landed cost document the warehouse was "In transit" but at the 2nd Landed Cost document it will be " General". however, if I copy from initial document I cannot change the warehouse.........
I tried as weel the inventory revaluation and think it wil probably be the best alternative. Is there any way to include the batch information on this document. Would you suggest a UDF?
Thanks

If I wanted to exchange my iPhone 5 for the new iPhone 6 (no additional cost after $199 gift card from selling iPhone 5) do I have to pre-order online or do I just have to show up at a Verizon store Sept 19th?

If I wanted to exchange my iPhone 5 for the new iPhone 6 (no additional cost after $199 gift card from selling iPhone 5) can I pre-order online now or do I just have to show up at a Verizon store Sept 19th?

scodaddy, that is a wonderful question. We are super excited about the new iPhone. You can always pre-order your new iPhone online and then start the mail in rebate by following this link: http://bit.ly/GGnDDC Or you can always go into the store location and do it all in store on the 19th when the phone is launched. That would depend on if the store has them in stock when you go in. I hope that this was able to address your concern.
KevinR_VZW
Follow us on Twitter @VZWSupport

Use of template using CPT1 for charging an additional cost to the product

Hello,
I'm trying to charge an additional cost burden to the cost of my product for every base unit produced. (cost estimate)
I have created a template using transaction CPT1 with sender as Cost Center / Activity Type in environment 001
The activity type is measured in EA (Eaches) while we make our product in boxes (Product base unit of measure is 'Boxes') with say 20 Eaches going into a Box
I have maintained an activity price using transaction KP26 at say $0.55 per Each
I have assigned this template to my costing sheet , valuation area and overhead key using transaction KTPF
When I now cost the material for costing lot size of a 1000 boxes, it still charges the product with the activity price per Each ($0.55) instead of multiplying $0.55*20*1000 = $11,000 for a 1000 boxes
The formula I have chosen in the template against 'Plan quantity ' is in the attachment enclosed:
I need help with doing the right thing within the template to make it give a cost burden of $11000 for every 1000 boxes costed (costing lot size)

Didn't realize that you have to use transaction CPTD to charge template overhead to production orders. That's why it was not working. Now it is posting by reading the confirmed yield. But it is still not converting eaches to boxes using the conversion factor in the material master.
The formula I'm currently using in the template for actual quantity is as under:
OrderYieldConfirmed / AltQtyFactorFromMaterial( AlternativeQuantityUnit
= 'BX', Material = OrderMaterialNumber )
Please tell me what I need to do to the above formula to make it convert boxes to eaches using conversion factor in the material master?
A similar formula has worked beautifully for 'cost estimate'
OrderTotalQuantity / AltQtyFactorFromMaterial( AlternativeQuantityUnit =
'BX', Material = OrderMaterialNumber )

LOADING ADDITIONAL COSTS (change matches revenue cost of goods in warehouse

Subject: LOADING ADDITIONAL COSTS (change matches revenue cost of goods in warehouse and not accounting for the year 2008)
Problem:
we must add the cost of goods of the raw material (for which was made a check invoice) of the costs, which are arising and charged by different suppliers (transport, freight, insurance, etc. ..). These are already included in FI with fb60.
The result should be:
- From the consignment of goods entering, add (only in Warehouse (STOCK), NOT IN ACCOUNTING ') cost accessory
- Do not change the quantity
- Having the total cost of stock
- Exploiting the average cost to FIFO must consider the total cost after additional adjustment
Example:                                                                                data
ME21N: purchaise order No. 321 = article 1000kg a price of u20AC / kg 2.30               01/07/2008
MIGO: goods receipt PO confirms price quantity x (u20AC 23,000) batch 298                      07/07/2008
MIRO(enter incoming invoice): Check invoice OK per (u20AC 23,000) batch 298           07/08/2008
Invoices received for costs Accessories:                                                                08/08/2008
FB60: transportation bill on all'purchaise order above cost u20AC / 0.11 kg
0.11 * 1000kg = 110 recorded in cost and accounting of stock.
In accounting, the cost has been reported, in warehouse I need to reverse (add) u20AC / kg to 0.11 initial cost of u20AC / 2.30 kg without adjustments in general accounting, but only in warehouse value and not in the quantity.
So in the end I should have:
batch n° 298 - kg 1000 at a cost of u20AC 2.41 (2.30 +0.11) for the year 2008. How should I do?
thanks

Thomas,
I presume that your client has activated 'Revenue Recognition' component in SAP.
If your client has already activated the RR component, they may be aware that the activation is unreversible.
Recognition of costs in a deferred revenue scenario requires some customization effort but definitely do-able. It is not falling within standard SAP.
I worked on scope of one such project but it did not happen unfortunately.
Can you please post your regular updates in this forum?
All the best.
Thanks
PS: I am not an employee of SAP AG and by answering questions, I am not getting any monetary benefits anywhere. I am answering questions here in my spare time for recognition and the points awarded, which gives me a sense of self-satisfaction. Awarding points is also a way of saying thanks and it will encourage me to answer more questions and share my knowledge and experience

Additional cost for finished goods

Hi all,
Here we are following fifo method valuation. we are using SAP B1 2007B PL 04.
I have a doubt how do we account the additional cost like Rent, Electricity etc.
and What G/L Account need to specify at determination level. Here we are determing G/L account with account groups.
I have a document for that but that doesnt give me clear picture of additional cost and
G/L accounts.
Kindly explain me in details with respectives to G/L Accounts
Regards
Shashi

Hi Shashi,
static costs should be included in a BOM as standard cost items. This will add to the item cost of the finished product.
Have a look at our Wiki here (Expert on Phone Newsletter April 2008):
[How to include labour cost in a BOM.|https://wiki.sdn.sap.com/wiki/display/B1/Howtoincludelabourcostina+BOM.]
You can substitute other costs for 'labour'.
All the best,
Kerstin

To add additional cost to specific cst component in cst component structure

Hi All,
We have an issue related to Product Costing.
The requirement is to add 5% additional cost to one specific cost component in cost component structure related to material handling (now coming as variable cost). The assigned cost elements to this cost component have cost element category as 41 (overhead rates). The requirement is to display this 5% additional cost on the single cost component only in cost component split.
If anyone has worked on similar requirement, could you please let me know how to proceed on this.
Thanks in advance for your valuable feedback.
Thanks & Regards,
Darshanjeet Singh Sachdeva

Hi
Use CK74N.. You can add the value you want and also the cost ele of your choice.. Save it in CK74N
Now when you run CK11N, the cost you added in CK74N would get added to CK11N's own cost
br, Ajay M

Display vendor name in the additional costs details for the PO

Hi,
I was wandering if there is any possibility to display vendor's name in the additional costs detail in the conditions tab in PO.
As for standard, only the vendor number is shown.
Regards.

Hi,
It is not possible to view the name of vendor there in "Addiitonal Data" screen for the condition type.

When i use function module to create additive costs using KKPI_BDC_ADD_ON_C

Hi,
When i use function module KKPI_BDC_ADD_ON_COSTS_CREATE to create additive costs it shows an error. The error is 'THE OBJECT IS LOCKED BY THE USER SARKARD' the transaction it uses is CK74 for creating.
I have also read about KKP4_ADD_ON_COSTS_CREATE. But i dont know the usage of it..
I think it will be helpful if u can clarify with first FM.
Kindly suggest.
Thank you.
Harsha

Hi Harsha,
I have a similar requirement, but the issue that I am facing is that I can not find any parameter in the FM - KKPI_BDC_ADD_ON_COSTS_CREATE for Valuation Date which is a mandatory field in CK74. How did you overcome that issue, can you please share ?

Additional Costs on a Purchase Order

Hi Guys,
I wonder if anyone can help with this. We have a scenario where we are buying product from one supplier at a certain price and then paying an amount to another supplier for the use of their logo on this product. The scenario is a little like delivery costs in that we would receive an invoice for the additional costs which we would then want to post against the PO in order to influence the MAP for the product. For example, we may buy @ £10 each and pay £1 each for the right to use the logo. What is the best way of implementing this requirement?

Hi,
If you have one price condition for freight costs, for example, just go to the IMG activity and create another one by copy.
On the PO, add that same new price condition, and on the loupe enter the price condition and change the vendor.
Then, on the incoming invoice, choose 3 - Goods receipt + planned costs, and Layout - 7_6310 All information.
Cheers.

Import Duty 10% & Additive Cost

Hi Guru,
Is there possibilty to create % in additive cost. Eg Import need to be incorporate into the costing run of the raw material.
If can, please advice how to do it and cannot advice how to bring this cost into the coting run.
Hope to hear from you soon.
Thanks.
Regards,
Kulasingam Balasingam

Hi
A material cost estimate in which you can enter costs manually in the form of a unit cost estimate, so that the manual costs can be added to an automatic cost estimate with quantity structure.
To ensure that the additive costs are included, set the indicator Incl. additive costs for each valuation strategy in the valuation variant in Customizing for Product Cost Planning.
Specify the following through the costing variant in Customizing for Product Cost Planning:
o Whether any existing additive costs are to be included in cost estimates that you create with this costing variant
o Whether the additive costs are to be included when calculating overhead
o Whether the additive costs are to be included when transferring stock to another plant.
http://help.sap.com/saphelp_di471/helpdata/EN/7e/cb81fa43a311d189ee0000e81ddfac/content.htm
Regards

Additive Cost and Variance Calcultion

We started using Tcode CK74N to enter additive costs for certian materials. I did the configuration needed in the costing variant and added a cost element for additive costs in the cost component structure.
Everything is working fine, when we run CK11n for a material that already have an additive cost estimate, the additive costs are being picked up and included in the cost estimate. if we mark and release the cost estimate the additive costs are being reflected in the new standard, so far so good.
My question is around the variance postings that happen once we enter a production order and settle the variance at period end.
lets look at this example
Assume the following:
Material X current standard = $100
Order X quantity produced =10 cases
Material X NEW standard after negative additive cost =$80
Scenario 1 (no additive costs) the total debits (Actual postings form material consumption and activity confirmation) to a the order = $900
The total credit was $1000 (standard*quantity produced) , a $100 in variance will occur, and the posting at settlement will be to Debit the price difference account and to credit the cost of sales account for $100. This is the normal case
Scenario 2 : We included a -$200 of additive costs for that material in the standard (new Standard is 80) , the credit to the order will be $800 instead of $1000 , which will make the variance -$200 and the posting currently is to DR cost of sales and credit price difference account for $200
The business and Based on scenario 2 wants to automatically generate a posting to the ACTUAL side of the production order equivalent to the additional variance caused by additive costs? which will put the variance back at 100.
They would like to see a credit to the cost element used in the cost component structure to book additive costs. and the reminder of the variance 100 in our example should continue to be booked to the same price different account .
If this is possible and right to do? what account should be used to offset this credit that being proposed to the additive cost element ? Because I assume that a new FI document should be created to record the credit?
Thanks for your help

Hey,
It depends a little upon the settlement rule of your process/production order.
If you are settling to the material (MAT), the price difference will only be accounted for with one line, without separation between difference coming from additive costs and other differences.
If you are settling not via within CO, you maybe have the possibility the way you settle, but I can not see how you can use such a logic in a settlement process.
What I would do, is to create a custom reposting program, which reposts the additive cost difference separately, after which the normal settlement can take care of the remaining difference.
Regards,
Koen

Additive costs

Hi friends,
We have an issue related to Additive Cost. some costs which have been put live in the system since go-live have used additive costs to deliver the fixed ohd into the product cost instead of the purchase order condition type and
when conducting a cost roll up (CK40N), we were finding that we were getting 2 lots of additive cost because we have loaded new additive cost values from 1st may but we think the reason is that the we have loaded additive costs via the upload (CK74) but they are also pulling from the purchase order condition type so we are getting two lots of cost.
So we think the fix is that purchasing must update their condition types and we realised that the additive costs shouldn't have been loaded and we have deleted the additive costs because they never should have been loaded.
So advise me do we need to stop to upload or any other way to stop two times cost values.
Raju

Freight cost is added on to the basic standard cost of materials, which is fine. Basic cost of materials comes from regular cost estimate and the freight from additive. Now when a purchase order is raised, the vendor needs to be given a purchase order only for the basic price and not the freight. The material could be brought by own transport or the vendor charging separately for freight.
That being the assumption, the purchase order is loaded with a accrual type condition type for freight, which shall customized to create an accrual entry upon purchase. This could be meaningful to reduce/avoid the unwanted effect of distorted purchase price variance.

Updation of purchase info record during cost is released / additive costs

Hi Gurus,
Is there any enhancement available to to update the purchase info record with thecondition type
fild during release of materials using CK40N /CK24.
ie Whenever a cost is released , the object should populate the overhead condition type (ZUB1) on the INFO record
Another requirement is
Whenever there is adding/updating additive costs (ck74n and ck75n), the object should populate the corresponding condition types on the INFO records (ZFR2 for freight cost; ZOC2 for duty cost).
If you have any suggestions kindly replay.
Thank you very much.
Regards,
Jayaram.

Hi,
But my next question is how can I know how much cost centers will be for some document? If I need to define number of cost centers in advance, then this solution is not very flexible. The best solution would be if I could add values to classification flexibly (for example: one time 3 values and the other time 1 value).
:-Check box additional values in values tab of char. that will allow to enter flexible number of values any time
The other question is about values of parameters. For each cost center I need to enter two values (cost center number, and costs for that cost center). So, for each cost center I need to add 2 values. Is that possible using classification?
:-Create classification with chara. cost center, cost center value and check box additional values as above that will allow you to add values for cost center and cost center value.
Anirudh.

Additive cost in Std Cost estimate

Hi
I have a requirement to add extra cost in a material cost estimate for certain plants. Because of this I have two costing variants in our case. One is without this extra cost and another with extra cost. This cost is actually freight cost for certain materials.
For this purpose I am planning to use additive cost. I have created one item in the cost component structure and assigned the cost element for this additive cost.
I think that is all I require with regard to additive cost. Now when I try to enter additive cost, system showing some screen showing resources and all. I am not able to understand how can I enter it as a resource ?

Hi Nikita
I wont recommend allocation from cost center to prod orders....
You will have a toughtime entering the SKFs for the prod orders... You would agree that you would need tracing factor in the allocation cycle... which would be SKF... You need to identify the prod orders processed during the month, then enter SKF for them and then execute allocation cycle
Just think about it... May be you would realize the complicacy of it... I would suggest to use a costing sheet or a template allocation.. I dont know how the later works, I am nt an expert at it
Regards
Ajay M

Additional cost of land

Similar Messages

Maybe you are looking for