Additional field layout for O7Z4

Hello my fellow colleagues,
My client requests fields which exist in the structure RFOPS (Open Item Data for Clearing Transactions) such as (WRBTR - Amount in doc curr).
My problem is that I do not have the field available in transaction O7Z4, do you have any idea ? Is it possible to add fields which are not proposed in standard ?
Thank you for your answer.

Hi,
You can add the fields for which the data type is C and N (Example: Document header text). For data type P (WRBTR) you need enter manually in screen, for this take help from ABAPer.
We have done for BKTXT (Document header text).
For this added in 3 tables T021K (with str. RFOPS), BSIS and RFOPS.
After adding above tables you need to ensure that field is added/visible mode in the administrator settings of F-03. This you can see a "configuration" button left side of open item processing screen of F-03.
Please refer below notes.
647773/1228601/493238/300929/209774/48814.
Regards
SM

Similar Messages

  • Can 'Available section' in Field layout for account page layout renamed ?

    I have created custom page layout for 'Account ' where in I have added some custom fields for capturing more specific data of account.
    I would like create 'Account installed data' simillar headers available as 'Key Account Information:','Account Sales Information' in account page layout.Is there any possibility of renaming 'Available section'?

    santoshpatil, click on Account Layout, then just to the right of Edit you see a down arrow click on it then choose "Edit Sections".

  • Additional fields required for CUA to IDM IDOC

    Hi,
    I am deploying the Remote Loader for Novell IDM 3.5on my SAP system. (not using the HR driver.)
    But I need to add additional fields to allow the logic within the Driver to differentiate between external users and internal users.
    How can I amend the IDOC produced by the CUA framework within SAP to add the additional fields, my developer has already created a BADI to grab the additional information to populate into the IDOC.
    I just need a way to add it to the IDOC for processing into the Remote Loader.
    TIA
    Chris

    Chris,
    you simply have to extend the schema mapping rule inside your driver configuration.
    At the mapping rule, you can map your new infotypes to Novell eDirectory attributes manually without changing your HRMDA_xx.meta file.
    To make the mapping more handy, you can edit your HRMDA_xx.meta file and re-read it during the schema mapping process. Afterwards you can use the GUI wizard to process the mapping definition.
    - Holger

  • Input Field Layout - Documementation For Various Address Cleanse Engine

    Hi All,
    Where I can get a documentation for input field layout for various address cleanse engine available in Global Address Cleanse transformation:
    1. Australia
    2. Canada
    3. EMEA
    4. Global Address
    5. Japan
    6.USA
    Thnaks,
    Amit

    Hi,
    Thanks for the reply.
    I meant that both usa and germany address has only street and country information and without other information.
    And of cos without sufficient information, global address cleanse would not be able to correct it.
    The difference i am having is that, after global address cleanse, the PRIMARY_NAME1 field of the output field of the germany record is filled up as what we gave for the input However, the PRIMARY_NAME1 field of the output field of the USA record is blank.
    Both records are of status info code 2000 (Unable to identify locality, region, and/or postcode information on input. )
    So the question is that, if the USA engine is not able to cleanse the data, would it map the input street field onto the output PRIMARY_NAME1 field? Or would it give a blank PRIMARY_NAME1 field?

  • File Layout for ICR Tool (Process 003)

    Does anybody know how to obtain the correct field layout for manually uploading data to the SAP Inter-company Reconciliation tool?

    Ralph Stadter can you please advice with above question.
    Thanks

  • Additional Field needed!

    Hi,
    We have a situation where we need to add an additional field "reason for water usage"  as an optional field with drop down choices in MAM/MAU
    I am new to Mobile.
    Kindly let me know how to progress on this.
    Regards,
    Sanjay

    We appreciate your feedback.  Please submit you idea in IdeaScale, which can also be accessed directly from within your SAP Cloud for Travel and Expense system > Help Center > Make SAP Cloud for Travel and Expense better.  By entering new feature requests in IdeaScale, other users can vote on them.  This helps the SAP Development team prioritize new feature requests.

  • Exit_saplv60b_008 / transfer additional field from vbrp to bseg (SD-FI)

    Hi together,
    I´ve populated an additional field 'ZXXX'for trx. va01 and adjusted the copying control in order to transfer this information into the billing document (e.g. trx, vf03). So far so good.
    But now I want to transfer this information to table bseg (field bseg-zxxx). I know that you can use 'exit_saplv60b_008' with this. But I don´t know how to proceed.
    Do I have to expand structure ACCIT?
    Thanks for any help

    Hi,
    Well, in my opinion it doesn´t really matter if I use sdvfx004 or sdvfx008.
    My problem is I don´t know how actualize the  transfer vbrp-zXXX to bseg-zXXX.
    I´m looking for a suitable piece of coding.
    Thanks for any help

  • Addition of New Column name "Qty" in user defined layout for CJR2

    Hi Friends,
    I am going thorugh variurs posts but could not a fetch correct answer. If that was available and missed, sorry about that.
    My requirement is, wanted to have new user defined layout which would be copied from 1-701 (CJR2). The layout should have new column which would be named as "Qty".
    Note that I tried to change name after pulling new fileds from left side to right hand side but these fields are grayed out in change layout.
    What is the work around solution to have new column and tthis wouold be named as "Qty". Let me ask one question is it possible to add new fields name to standard layout like 1-702 other than what it has been delivered by SAP????.
    Looking forward to hear from and thanks for your efforts.
    Regards,
    Sudhakar

    Have you tried MENU > Edit > Columns > Append additional fields?
    I think you can not choose any other characteristics other than SAP has provided which is mentioned in SAP Help.
    Regards,
    Mahendra

  • Additional Fields for Report FBL1

    Dear All
    I need to add User Name field (USNAM) and few other fields to the layout for report FBL1(Vendor open line items).
    I have added the field USNAM under "Define Additional Fields for Line Item Display". But the field is still not showing up for selection in the report FBL1.
    Pls advice.
    Rgds
    Nitika

    Hi Nikita,
    Once you have added special filed you have to run the below mentioned program to extend the new filed in FBLxN report.
    Run below program from SE38:
    RFPOSXEXTEND
    BALVBUFDEL
    The correct way to fix this is mentioned in SAP note 984305. Running report BALVBUFDEL resets the buffer.
    The special field is now available in the layout selection.
    Hope this helps.
    Pls assign points as way to say thanks

  • Additional fields for line item display for Vendor Accounts

    Hi,
    The additional fields for line item display have been defined for the vendor accounts. I am able to see the additional fields in SAP 4.7 system but not in ECC 6.0.
    Could you help me to know how the same will be displayed in ECC 6.0 system.
    Thanks

    In SPRO, Vendor Accounts -> Line Items -> Display Line Items -> Define Additional fields for Line item display, the fields for Check number from (PAYR-CHECF) and Tax Jurisdiction (BSEG-TXJCD) have been defined.
    When I am executing Vendor Line Item display (FBL1N), I am not able to select these fields for defining a layout. Could you please let me know, how I will get these fields in FBL1N.
    Thanks

  • Define Additional Fields for Line Item Display

    Dear gurus,
    I'd like to ask for your help again, please. I've just added the field BKPF-USNAM to the list of fields of FBL1N using IMG:" Financial Accounting-> Accounts Receivable and Accounts Payable->Vendor Accounts->Line Items-> Display Line Items->Define Additional Fields for Line Item Display". When I run the report the field is correctly displayed but if I save the current layout and set it into the selection screen, the column appears is blank. And if I open the change layout window and click OK the column gets filled.
    Is there another transaction that I must set new columns to FBL1N.
    Thank you very much.
    Paresh Jivani
    Edited by: Jivani Paresh on Jul 31, 2009 9:16 AM

    Hii,
    When you will execute FBL1N, it will come up in standard format. if you want to see any specific fields,then you have to go to Change Layout button and choose from available fields as per your requirement and then execute.
    For future reference, you can save this layout as a Variant and then you can directly execute that report using that variant.
    Dhara D.

  • Additional field(company code) in purchase order screen layout

    Hi All experts,
    I have a requirement to set the company code in Purchase order as display field during PO creation or change.
    I have checked in IMG under screen layout for purchase order but  there is no company code field available.
    How can I add the additional field into the screen layout.
    Any inout will be highly appreciated.
    Thank you in advance
    Lost.

    Hi Chee Wan Ng,
    <b>Where</b> exactly you want to set the Company Code field in the Purchase order? Actually this field is already available under <b>Org.data</b> tab in the Purchase Order Creation transaction (ME21N), so you may not require to set the Company Code again.
    Which version of SAP R/3 you are using?
    Hope this helps you, if not, then give us more details to help you better.
    Good luck.

  • FBL5N : Adding additional field PERNR  to layout

    Hi experts,
    I had added additional field PERNR - personnel number in FBL5N layout for displaying in output.
    I had added pernr- personnel number by following the path
    SPRO -> Financial accounting ( new ) -> accounts receivable and accounts payable-> customer accounts ->line items -> display line items -> define additional fields for line item dispaly
    here i added bseg - pernr
    after adding , in FBL5N layout the field is appearing , but it is displaying blank in output  .
    Is there any thing needs to be done to display additional field in output of FBL5N.
    kindly give me any suggestions.
    thanks & tregards,
    Raghul
    Edited by: Raghul Gandhi on Mar 23, 2010 9:30 AM

    Hi,
    FBL5N: customer line item display.
    BSEG-PERNR: personnel number.
    Under which circumstances should BSEG-PERNR contain a value if you create customer related postings?
    If there is no personnel number given during posting (why should it?)  the field added to the FBL5N-layout will be empty.
    Best regards, Christian

  • Additional fields not showing in FS10N layout

    Hi ,
    1) appended new fields into RFPOS and RFPOSX structures and run the program RFPOSXEXTEND
    2) created BTE to get values for additional fields added
       it was fine working in DEV , once it move to QAS additional fields are not showing in the FS10N layout
    same steps are processed as in QAS as i din in DEV, sturcture as got fields and BTE is fine
    Why the additional fields are not showing up ...
    Regards,
    Pradeep

    How come i would be posting here without checking the layout , new fields are not in the layout even though it shows in the structure RPOSXEXT.
    FS10N layout  - added new fields in dev using structure and run the program to extend the structure , new fields and data show in DEV , same process i did but it doesnt show in  QAS .
    Would be any configuration issue or any other i need to check ....
    Edited by: Pradeep Annaiah on Jul 20, 2011 10:35 PM

  • Modify field description for IN9030/Subtype 04 (additional Details)

    Hi,
    The field description for IN9030/Subtype 04 (additional Details) need to be modified from "Role" to "Role Title".
    Pls guide where the Field Text can be changed.
    Tx

    One doubt,
    do you want to change the subtype text like for IT 0006 we have subtype 1 = Permanent address, 2 = office address etc
    or do you want to change the description of the field that describes the subtype.
    If it is the second case then you will either have to change the name at the structure level in PM01 or on the screen on your custom infotype using SE51.
    Give your program name and screen number.
    Go to layout
    double click on the text field which you want to change
    change the text and save and activate
    hope this helps
    Ajay

Maybe you are looking for

  • How do i get to Type within a document

    All i am aakinf is How do i get to type within a document   what button do i hit to do this

  • Improve hierarchical query speed using 'start with' and 'conect by prior'

    Hi The query within the 'explain' runs about a second and I need to imporve it. There are indexes set for both the child_id and the parent_id. The total number of rows for the PRM_COMPONENTS table is 120000. I'm working on 'Oracle Database 10g Releas

  • How to sync iPhone albums

    How do I sync albums made on iPhone 4 with iPhoto on my MacBook?  Photo stream syncs fine.

  • Not open new IE window when clicks on a hyperlink

    Hello. I'm using Adobe Reader 7.0.8 and IE 6.0 I open a PDF file using the Adobe Reader, click web hyperlink on the document, it always launch in same IE window. How can I configure to launch a PDF hyperlink in separate window? Thanks.

  • In-depth DPS classroom course in Chicago

    Does anyone know where I can take a DPS course in Chicago I'm looking to take a in-depth DPS classroom course, something more than a couple hours or days. Does any know of a course like this in Chicago? Thanks in advance for your assistance.