AddOn disconnected after installation
I have a problem using my latest AddOn.
I created all Files (AddOn, Installer, ard-File) and installed it with SBO.
The AddOn is running fine in debugging mode.
After restarting SBO everything is fine, SBO has connected the AddOn, but if i try to use it, an error message appears: "AddOn is disconnected blablabla".
Can anybody explain this behaviour?
With an old version of this AddOn i simply changed the version number from 1.11 to 1.2 and it worked after that.
Frank
Did you report this problem already via SAP Service Marketplace (SMP)?
As version 2004 is now in a status of "General Availability" (since Friday), you should be able to do so + do it (please).
Please note, that bugs and shortcomings have been collected in the Ramp-Up phase + will be certainly fixed soon (But I cannot tell you when exactly that will happen; sorry!).
Nevertheless, bugs reported via SMP will usually be fixed earlier than shortcomings will be corrected...
So, again, please report your issues on SMP!
Thanks,
Frank
Similar Messages
-
10gOAS RepCA into db disconnects after TS creation
Hi,
Trying to use RepCA to install into my existing database. Have confirmed all the options, parameters, etc per install instructions.
Looking at Log, installer disconnects after successful tablespace creation. GUI indicates breakdown when it tries to connect as WKSYS.
Can't work around, since the RepCA drops the WK users and tablespaces before doing anything.
NonRAC, NonRaw install on Win2K.
Please advise.
Thanks,
Scott Rappoport, OCP
Log excerpt follows. (NOTE: hostname XXXX'd out).
The tablespace OLTS_DEFAULT was created successfully
The tablespace OLTS_SVRMGSTORE was created successfully
Repository Loader actionFinished
Repository Loader ActionQueueFinished
Repository Loader actionStarting
Repository Loader actionFinished
Repository Loader ActionQueueFinished
Loading Repository for AutoExtend Tablespaces using the specification file E:\Disk4\repCA\repca\xml\autoextend.xml
Repository Loader actionStarting
[SQLPlusAction] Oracle Home: D:\oracle\product\9204
[SQLPlusAction] SQLPlus options:
[SQLPlusAction] User name: SYS
[SQLPlusAction] Connect string: (DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=XXXX)(PORT=1521)))(CONNECT_DATA=(SERVICE_NAME=dwh8)))
[SQLPlusAction] DB role: SYSDBA
[SQLPlusAction] SQL script file: E:\Disk4\repCA\repca\sql\autoExtend.sql
[SQLPlusAction] Output :
SQL*Plus: Release 9.2.0.4.0 - Production on Wed Aug 4 13:20:05 2004
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
SQL> SP2-0640: Not connected
[SQLPlusAction] Error :
<None>
Repository Loader actionFinished
Repository Loader ActionQueueFinished
Loading Repository for Grant permissions using the specification file E:\Disk4\repCA\rdbms\xml\permissions.xml
Repository Loader actionStarting
[SQLPlusAction] Oracle Home: D:\oracle\product\9204
[SQLPlusAction] SQLPlus options:
[SQLPlusAction] User name: SYS
[SQLPlusAction] Connect string: (DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=XXXx)(PORT=1521)))(CONNECT_DATA=(SERVICE_NAME=dwh8)))
[SQLPlusAction] DB role: SYSDBA
[SQLPlusAction] SQL script file: E:\Disk4\repCA\rdbms\admin\dbmsiasu.sql
[SQLPlusAction] Output :
SQL*Plus: Release 9.2.0.4.0 - Production on Wed Aug 4 13:20:06 2004
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
SQL> SP2-0640: Not connected
SQL>
[SQLPlusAction] Error :
<None>
Repository Loader actionFinished
Repository Loader actionStarting
[SQLPlusAction] Oracle Home: D:\oracle\product\9204
[SQLPlusAction] SQLPlus options:
[SQLPlusAction] User name: SYS
[SQLPlusAction] Connect string: (DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=XXXX)(PORT=1521)))(CONNECT_DATA=(SERVICE_NAME=dwh8)))
[SQLPlusAction] DB role: SYSDBA
[SQLPlusAction] SQL script file: E:\Disk4\repCA\rdbms\admin\prvtiasu.plb
[SQLPlusAction] Output :
SQL*Plus: Release 9.2.0.4.0 - Production on Wed Aug 4 13:20:07 2004
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
SQL> SP2-0640: Not connected
SQL>
[SQLPlusAction] Error :
<None>
Repository Loader actionFinished
Repository Loader ActionQueueFinished
Loading Repository for OracleAS Ultrasearch using the specification file E:\Disk4\repCA\ultrasearch\install\us_repca.xml
Repository Loader actionStarting
[SQLPlusAction] Oracle Home: D:\oracle\product\9204
[SQLPlusAction] SQLPlus options:
[SQLPlusAction] User name: SYS
[SQLPlusAction] Connect string: (DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=XXXX)(PORT=1521)))(CONNECT_DATA=(SERVICE_NAME=dwh8)))
[SQLPlusAction] DB role: SYSDBA
[SQLPlusAction] SQL script file: E:\Disk4\repCA\ultrasearch\admin\wk0deinst.sql
[SQLPlusAction] Output :
SQL*Plus: Release 9.2.0.4.0 - Production on Wed Aug 4 13:20:09 2004
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
SQL> ============== Ultra Search Deinstallation ==============
Connected.
drop context wk$context
ERROR at line 1:
ORA-04043: object WK$CONTEXT does not exist
drop context wk$ctx_ldap
ERROR at line 1:
ORA-04043: object WK$CTX_LDAP does not exist
drop user wksys cascade
ERROR at line 1:
ORA-01918: user 'WKSYS' does not exist
drop role wkuser
ERROR at line 1:
ORA-01919: role 'WKUSER' does not exist
drop user wkproxy cascade
ERROR at line 1:
ORA-01918: user 'WKPROXY' does not exist
drop user wk_test cascade
ERROR at line 1:
ORA-01918: user 'WK_TEST' does not exist
Clean up interMedia Text dictionary
PL/SQL procedure successfully completed.
Drop public synonyms
PL/SQL procedure successfully completed.
Removing all XDB resources (ACLs and folders)
PL/SQL procedure successfully completed.
SQL> Disconnected from Oracle9i Enterprise Edition Release 9.2.0.4.0 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.4.0 - Production
[SQLPlusAction] Error :
<None>
Repository Loader actionFinished
Repository Loader actionStarting
[SQLPlusAction] Oracle Home: D:\oracle\product\9204
[SQLPlusAction] SQLPlus options:
[SQLPlusAction] User name: SYS
[SQLPlusAction] Connect string: (DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=XXXX)(PORT=1521)))(CONNECT_DATA=(SERVICE_NAME=dwh8)))
[SQLPlusAction] DB role: SYSDBA
[SQLPlusAction] SQL script file: E:\Disk4\repCA\ultrasearch\admin\wk0csys.sql
[SQLPlusAction] Output :
SQL*Plus: Release 9.2.0.4.0 - Production on Wed Aug 4 13:20:11 2004
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
SQL> ... creating user WKSYS
SP2-0640: Not connected
... creating user WKPROXY
SP2-0640: Not connected
... creating role WKUSER
SP2-0640: Not connected
... granting privileges to WKSYS user
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
... granting privileges to WKPROXY user
SP2-0640: Not connected
... revoking all the privileges and roles from WKUSER role
SP2-0640: Not connected
... granting privileges to WKUSER role
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
... creating the default user WK_TEST
SP2-0640: Not connected
... granting WKUSER role to WK_TEST
SP2-0640: Not connected
SQL>
[SQLPlusAction] Error :
<None>
Repository Loader actionFinished
Repository Loader actionStarting
ERROR -
arguments: '-thin' '-u' 'wksys/wksys@(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=XXXX)(PORT=1521)))(CONNECT_DATA=(SERVICE_NAME=dwh8)))' '-f' '-s' '-g' 'PUBLIC' '-v' '-r' 'E:\Disk4\repCA\ultrasearch\lib\ultrasearch_db.jar'
creating : resource META-INF/MANIFEST.MF
SQL Error while connecting with thin driver to (DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=rappoports2)(PORT=1521)))(CONNECT_DATA=(SERVICE_NAME=dwh8))): ORA-01017: invalid username/password; logon denied
exiting : could not open connection
oracle.ifs.utils.action.ActionFailedException:
arguments: '-thin' '-u' 'wksys/wksys@(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=XXXX)(PORT=1521)))(CONNECT_DATA=(SERVICE_NAME=dwh8)))' '-f' '-s' '-g' 'PUBLIC' '-v' '-r' 'E:\Disk4\repCA\ultrasearch\lib\ultrasearch_db.jar'
creating : resource META-INF/MANIFEST.MF
SQL Error while connecting with thin driver to (DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=rappoports2)(PORT=1521)))(CONNECT_DATA=(SERVICE_NAME=dwh8))): ORA-01017: invalid username/password; logon denied
exiting : could not open connection
at oracle.ifs.admin.actions.LoadJavaAction.processFinished(LoadJavaAction.java:107)
at oracle.ifs.admin.actions.ForkProcessAction.perform(ForkProcessAction.java:186)
at oracle.ifs.utils.action.ActionQueue.performActions(ActionQueue.java:303)
at oracle.ifs.utils.action.ActionQueue.run(ActionQueue.java:229)
at java.lang.Thread.run(Thread.java:534)Will some one from Product Management please respond to this problem?
When is the 9041 patch due?
Thanks,
Scott Rappoport, OCP -
Addon disconnected while retrieving huge data using orecordset on client
Hi,
My addon is using orecordset to retrieve about 11000 records on client pc and the addon disconnected while processing half way. When I trace the error, it seems like when the server fetches the records back to client pc, the addon disconnected. However, it's run perfectly on the server.
This addon has another function that fetches a small records using orecordset and it's working fine on the client pc.
Is there a limitation of using orecordset to fetch huge volume of data?
Appreciate if anyone could help.
Regards,
CherineHi,
My sdk is used to do GL Consolidation. What it does is to extract journal entries from other company and do some calculation and store the data in UDT. This sdk is installed on the holding company. I use ocompany.connect to connect to other company and once it is connected I will execute a query to extract the journal entries from this company back to my holding company and store the data in UDT.
The addon stop half way while retrieving journal entries due to large volume of data.
The connection to other company is as below:-
With oSubCompany
.Server = oCompany.Server
.CompanyDB = DbName
.UseTrusted = False
.UserName = Login
.Password = Password
.DbUserName = DBLogin
.DbPassword = DBPwd
If SQLVer = "MSSQL2005" Then
.DbServerType = SAPbobsCOM.BoDataServerTypes.dst_MSSQL2005
Else
.DbServerType = SAPbobsCOM.BoDataServerTypes.dst_MSSQL
End If
If .Connect <> 0 Then
.GetLastError(ErrCode, ErrMsg)
Throw New ApplicationException("Failed to connect to Source Company: " )
End If
End With
The query is as below:-
select j.transid, j.transtype, j1.baseref, j.memo, j.refdate, j.number, n1.seriesname, j1.line_id, j1.account, j1.debit, j1.credit, j1.profitcode, a.acctname, a.formatcode, a.u_acquisition,
Replace((Case When a.U_ConsolAcct = '*' Then a.FormatCode Else a.U_ConsolAcct End),'-','') As 'ConsolAcct', (Case When a.groupmask < 4 Then 'BS' Else 'PL' End) As 'AcctTyp'
from OJDT j left join JDT1 j1 on j.transid = j1.transid
left join nnm1 n1 on n1.objectcode = 30 and n1.series = j.series
left join oact a on a.acctcode = j1.account
where j.refdate >= oSubRecordset1.Fields.Item("f_refdate").Value
and j.refdate <= oSubRecordset1.Fields.Item("t_refdate").Value
and isnull(a.u_acquisition,'') <> 'Y'"
oSubRecordset.DoQuery(sQuery)
I just wander whether is it disconnected due to the connection to other company got disconnected or oRecordset disconnected after sometimes.
For 2005A SP20, do we still use com object? How and where to set the time out value?
Regards,
Cherine -
Hi Guys,
After installation of Power Manager 1.43, the following errors were immediate shown at event viewer: COM+ Event System failed to fire the StartShell and Logon method on subscription {F6FE5592-FCBC-44AD-A836-D37F5085ED5B}-{00000000-0000-0000-0000-000000000000}-{00000000-0000-0000-0000-000000000000}. The subscriber returned HRESULT 80004001.
Please advice if this is a known issue? Thanks!Hello,
this is a known problem. See this thread
Follow @LenovoForums on Twitter! Try the forum search, before first posting: Forum Search Option
Please insert your type, model (not S/N) number and used OS in your posts.
I´m a volunteer here using New X1 Carbon, ThinkPad Yoga, Yoga 11s, Yoga 13, T430s,T510, X220t, IdeaCentre B540.
TIP: If your computer runs satisfactorily now, it may not be necessary to update the system.
English Community Deutsche Community Comunidad en Español -
Hi,
I have a specific problem on one notebook. It's a windows 2000 SP4. The installation log does not contain an obvious error message. But after installation, the database homepage doesn't start.
When looking in the alert file I find those ORA 7445 and ORA 472 errors. When starting up the database using sqlplus and stepping through nomount , mount, open, it seems that the database is running for a short period and then again ends up with the above errors.
Any ideas?Hi
ORA 7445 indicates that oracle has detected a core dump when attempting a particular operation. To identify a bug you need to look at the first argument after the 7445 error as this identifies the module where the exception was raised. Use this together with the stack produced to identify a bug if possible. The ORA-600/ORA-7445 Troubleshooter will help identify bugs known to core dump in the identified module. https://metalink.oracle.com/metalink/plsql/f?p=130:14:1905955764385093414::::p14_database_id,p14_docid,p14_show_header,p14_show_help,p14_black_frame,p14_font:NOT,153788.1,1,0,1,helvetica
Also look into the Customer Introduction to ORA-7445 Errors at https://metalink.oracle.com/metalink/plsql/f?p=130:14:1905955764385093414::::p14_database_id,p14_docid,p14_show_header,p14_show_help,p14_black_frame,p14_font:NOT,211909.1,1,0,1,helvetica
-Priya -
After installation of latest Bridge and Photoshop version (2014.2.2) *.CR2 files will not be displayed correctly anymore, neither in preview nor in Camera Raw dialogue.
Some pictures have white squares with blue and red diagonal stripes that cover almost the complete picture.
When opening those files I have the same problem in Camera Raw dailogue and even in Photoshop eventually.
I tried to open the same same pictures on another computer with the same version of Bridge and Photoshop but the problem remains the same.
It seems like the files itselves are still ok, because if you open an explorer window the previews of the pictures are all ok. And the pictures' sizes remain the same.
I tried to clear the cache in both programs but it didn't help.
Has anyone an idea????First see if a reboot of your PC helps. If not,
Resets may be in order:
Photoshop: Press and hold Control - Shift - Alt immediately upon cold-starting Photoshop. If you get the keys down quickly enough - and you have to be VERY quick - it will prompt you to confirm deletion of your established preferences, which will lead to them all being set to defaults.
Bridge: Start Adobe Bridge and immediately press Ctrl+Alt+Shift (Windows) or Command+Option+Shift (Mac OS) until the Reset Settings dialog box appears. Select all three options--Reset Preferences, Reset Standard Workspaces, and Purge Entire Thumbnail Cache--and then click OK.
Outdated graphics drivers can also cause display problems. Go to your GPU maker's website and be sure you have the latest drivers for your card model. -
SQL Developer on Linux hangs when disconnecting after VPN reconnect
Hello,
I have a problem with using connections after general link failure (Cisco VPN disconnect in my case, lost of route to Oracle DB).
When I reconnect to a VPN and I'll try to disconnect from a previously opened (before general link failure) connection, I need
to wait more than 10 minutes to complete this process. SQL Developer is completely unusable during this time.
Steps to reproduce:
1. Connect to VPN
2. Open connection in SQL Developer to host accessible only by this VPN
3. Restart VPN
4. Try to do anything with this connection (disconnect, execute sql in opened SQL Worksheet, view tables, etc.)
This bug is not new in recent versions, I'm using SQL Developer from over 2 years and this bug was always with me. But if I remember correctly in earlier versions (<3.0) I couldn't reuse the connection to execute sql (hanging SQL Developer for more than 10 minutes) but disconnecting would succeed without a problem.
Maybe SQL Developer should move connection management to separate thread to resolve this issue... or is there another solution?
I'm using SQL Developer 3.1.07.42 @ Linux 3.0.4
For VPN connectivity I use vpnc
When I restart VPN connection I'm loosing TUN interface and all routes.
I have tested this issue on a few versions of SQL Developer on Windows XP, including 3.1.07. There is no problem with disconnecting after vpn failure on Windows.
Maybe I should fill some bug report? When I can do such thing? Metalink?
Best regards,
Irek SloninaHi Irek,
Possibly you can resolve this issue by altering the type of the connection that becomes non-responsive upon a VPN reconnect. What type are you currently using: Basic, TNS, etc?
In this forum thread (for Windows, unfortunately, not Linux), although different from your case, the solution used Thick/OCI driver, not Thin/Basic:
Windows 7 VPN
I have no VPN client on Linux (much less vpnc), only Cisco AnyConnect on Win XP, so I cannot test your scenario.
Regards,
Gary
SQL Developer Team -
"Build Application/settings/Advanced/Run after installation" is not working LV70
Hi !
Look at thread
http://forums.ni.com/ni/board/message?board.id=170&message.id=129269
Seems like "Run executable after installation" is not workin at all (LV70, W2K).
I' been try all,
- run directly *.BAT file
- i great exe file what' s runn *.BAT file.
If i run directly "CmdPrompt3.exe" (attachment , source) it's working but not
with when i run "setup.exe" ?
What is wrong ?
What means "wait until done" ?
BR
-HeVi-
Attachments:
CommandPromt3.vi 23 KBHi HeVi,
I'm not sure that I completely understand what your issue is. Are you
trying to launch a BAT-file after the installation of an application?
In that case, I will recommend you to refer to the following
KnowledgeBase:
Running a Batch File Automatically After an Installation to Access Installed Files
If the methods in this KB doesn't work, please let me know.
Have fun!
PS: I wish it was only 25 degrees celsius here - it's currently around the 40 degrees celsius in Austin...
Message Edited by Philip C. on 07-08-2005 02:42 AM
- Philip Courtois, Thinkbot Solutions -
Error while starting essbase after Installation: Cannot load $DM_APP$
Hi,
I have installed Essbase on solaris. After installation when I start Essbase it started successfully but with an error:
[Mon Sep 19 09:52:22 2009]Local/ESSBASE0///Error(1052003)
Timed out reading from server
[Mon Sep 19 09:52:22 2009]Local/ESSBASE0///Error(1054001)
Cannot load application $DM_APP$ with error number [1052003] - see server log file
[Mon Sep 19 09:52:22 2009]Local/ESSBASE0///Warning(1051221)
Creation of Datamining Object Management Application Fails with status [1054001]
I have verified all the evnironment variables they are set correctly same as one of our other environments.
I would really appreciate if some can help me troubleshoot this.
Thanks and Regards,
VamshiFinally Found that the JVM path is set inccoretly.This should be the path to be set: $HYPERION_HOME/common/JRE/Sun/1.5.0/lib/sparc/server
Thanks and Regards,
Vamshi -
Problems after installation with disp+work.exe
Hey guys,
i tried to find a solution, but didn't found one....after installation i had to find sapmmc. There was a error message after installation; after some adjustments in the service-file of windows now the message-server runs; but the disp+work still not....find the log attached:
Regards
Christian
trc file: "dev_disp", trc level: 1, release: "700"
sysno 00
sid NSP
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 95
intno 20050900
make: multithreaded, ASCII, optimized
pid 5276
Fri Feb 01 15:35:19 2008
kernel runs with dp version 224(ext=109) (@(#) DPLIB-INT-VERSION-224)
length of sys_adm_ext is 360 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 5276) [dpxxdisp.c 1239]
shared lib "dw_xml.dll" version 95 successfully loaded
shared lib "dw_xtc.dll" version 95 successfully loaded
shared lib "dw_stl.dll" version 95 successfully loaded
shared lib "dw_gui.dll" version 95 successfully loaded
shared lib "dw_mdm.dll" version 95 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Fri Feb 01 15:35:24 2008
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5355]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >christiank_NSP_00 <
DpShMCreate: sizeof(wp_adm) 6328 (904)
DpShMCreate: sizeof(tm_adm) 3605136 (17936)
DpShMCreate: sizeof(wp_ca_adm) 1200 (60)
DpShMCreate: sizeof(appc_ca_adm) 1200 (60)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528040/528048
DpShMCreate: sizeof(comm_adm) 528048 (1048)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (96)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1280)
DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 06330040, size: 4205552)
DpShMCreate: allocated sys_adm at 06330040
DpShMCreate: allocated wp_adm at 06331A28
DpShMCreate: allocated tm_adm_list at 063332E0
DpShMCreate: allocated tm_adm at 06333310
DpShMCreate: allocated wp_ca_adm at 066A35A0
DpShMCreate: allocated appc_ca_adm at 066A3A50
DpShMCreate: allocated comm_adm at 066A3F00
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 06724DB0
DpShMCreate: allocated gw_adm at 06724DF0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 06724E20
DpShMCreate: allocated wall_adm at 06724E28
MBUF state OFF
DpCommInitTable: init table for 500 entries
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation view
<EsNT> Memory Reset disabled as NT default
<ES> 127 blocks reserved for free list.
ES initialized.
rdisp/http_min_wait_dia_wp : 1 -> 1
Fri Feb 01 15:35:29 2008
ERROR => MsINiRead: NiBufReceive failed (NIETIMEOUT) [msxxi.c 2515]
ERROR => MsIAttachEx:MsINiRead (rc=NIETIMEOUT) [msxxi.c 762]
***LOG Q0L=> DpLoopInit, nomscon () [dpxxdisp.c 1708]
CCMS: alert/MONI_SEGM_SIZE = 0 monitoring and alerting switched off.
ERROR => DpRGetLogin: Data for alien client [dpxxdisp.c 11251]
Connect request from wrong client at address 10.10.0.10(christiank)
ERROR => DpRGetLogin: Data for alien client [dpxxdisp.c 11251]
Connect request from wrong client at address 127.0.0.1(christiank.hidomain)
Fri Feb 01 15:36:14 2008
ERROR => MsINiRead: NiBufReceive failed (NIETIMEOUT) [msxxi.c 2515]
ERROR => MsIAttachEx:MsINiRead (rc=NIETIMEOUT) [msxxi.c 762]
ERROR => W0 (pid 5280) died [dpxxdisp.c 14318]
ERROR => W1 (pid 4088) died [dpxxdisp.c 14318]
ERROR => W2 (pid 5020) died [dpxxdisp.c 14318]
my types changed after wp death/restart 0x9f --> 0x9e
ERROR => MsIModTypes: not_attached [msxxi.c 1834]
ERROR => W3 (pid 4644) died [dpxxdisp.c 14318]
my types changed after wp death/restart 0x9e --> 0x9c
ERROR => MsIModTypes: not_attached [msxxi.c 1834]
ERROR => W4 (pid 3080) died [dpxxdisp.c 14318]
my types changed after wp death/restart 0x9c --> 0x98
ERROR => MsIModTypes: not_attached [msxxi.c 1834]
ERROR => W5 (pid 5752) died [dpxxdisp.c 14318]
my types changed after wp death/restart 0x98 --> 0x90
ERROR => MsIModTypes: not_attached [msxxi.c 1834]
ERROR => W6 (pid 6040) died [dpxxdisp.c 14318]
my types changed after wp death/restart 0x90 --> 0x80
ERROR => MsIModTypes: not_attached [msxxi.c 1834]
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1593
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Feb 01 15:36:24 2008
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Fri Feb 01 14:36:24 2008
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 5280 Ended no 1 0 0
1 DIA 4088 Ended no 1 0 0
2 DIA 5020 Ended no 1 0 0
3 UPD 4644 Ended no 1 0 0
4 ENQ 3080 Ended no 1 0 0
5 BTC 5752 Ended no 1 0 0
6 SPO 6040 Ended no 1 0 0
Dispatcher Queue Statistics Fri Feb 01 14:36:24 2008
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
4
2000
5
5
--------++++--
+
DIA
3
3
2000
3
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 7
wake_evt_udp_now 0
wake events total 7, udp 2 ( 28%), shm 5 ( 71%)
since last update total 7, udp 2 ( 28%), shm 5 ( 71%)
Dump of tm_adm structure: Fri Feb 01 14:36:24 2008
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Fri Feb 01 14:36:24 2008
=============================
Slots: 20, Used: 0, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1593
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Feb 01 15:36:29 2008
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >christiank_NSP_00 < (normal)
DpJ2eeDisableRestart
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Stop gateway
killing process (3876) (SOFT_KILL)
Stop icman
killing process (3444) (SOFT_KILL)
Terminate gui connections
wait for end of work processes
wait for end of gateway
[DpProcDied] Process lives (PID:3876 HANDLE:1556)
waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1593
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Feb 01 15:36:30 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:3876 HANDLE:1556)
wait for end of icman
[DpProcDied] Process died (PID:3444 HANDLE:1572)
not attached to the message server
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 5276) [dpxxdisp.c 10333]
Good Bye .....
Edited by: C. Koch on Feb 1, 2008 3:35 PMDuring BW system copy, NW04S.
We do have simalr error message loosing our time to bring up the system:
[disp_dev]
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Fri May 2 19:35:54 2008
WARNING => DpNetCheck: NiHostToAddr(www.doesnotexist0088.qqq.nxst) took 6 se
conds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust t
he DNS settings [dpxxtool2.c 5371]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
Fri May 2 19:35:55 2008
WLM Tag 'BD2/DSP' successfully set for this process
rdisp/http_min_wait_dia_wp : 1 -> 1
Fri May 2 19:36:00 2008
ERROR => MsINiRead: NiBufReceive failed (NIETIMEOUT) [msxxi.c 2515]
ERROR => MsIAttachEx:MsINiRead (rc=NIETIMEOUT) [msxxi.c 762]
***LOG Q0L=> DpLoopInit, nomscon () [dpxxdisp.c 1716]
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
[sapinst_dev.log]
TRACE 2008-05-02 23:20:44.132 [iaxxgenimp.cpp:752]
CGuiEngineImp::showMessageBox
<html> <head> </head> <body> <p> An error occurred while processing service SAP NetWeaver 7.0 Support Release 3 > Softwar
e Life-Cycle Options > System Copy > Oracle > Target System Installation > Central System > Based on AS ABAP and AS Java
> Central System( Last error reported by the step :<html> <head> </head> <body> An exception occurred while connecting to
the message server instance BD2/DVEBMGS00 on host nvdbw40, port 3900.<br>DIAGNOSIS: The original exception was: wapsmod.
ms.MsAttachFailed:
Connect to message server (nvdbw40/3900) failed: NIETIMEOUT..<br>SOLUTION: Make sure that the message server is started.
</body></html>). You may now </p> <ul> <li> choose <i>Retry</i> to repeat the current step. </li> <li> choose <i>View Log
</i> to get more information about the error. </li> <li> stop the task and continue with it later. </li> </ul> <p> Log fi
les are written to /tmp/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS/. </p> </body></html>
TRACE 2008-05-02 23:20:44.132 [iaxxgenimp.cpp:1255]
CGuiEngineImp::acceptAnswerForBlockingRequest
Waiting for an answer from GUI
INFO 2008-05-02 23:54:49.854 [sixxcstepexecute.cpp:1004]
An error occured and the user decide to stop.\n Current step "|NW_Doublestack_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_Syst
em|ind|ind|ind|ind|2|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_Start|ind|ind|ind|ind|1|0|start".
[dev_w0]
Fri May 2 19:35:56 2008
Bind service sapgw00 (socket) to port 3300
GwPrintMyHostAddr: my host addresses are :
1 : [165.140.111.55] nvdbw40 (HOSTNAME)
2 : [127.0.0.1] loopback (LOCALHOST)
3 : [165.140.114.55] bnvdbw40 (NILIST)
Full qualified hostname = nvdbw40
DpSysAdmExtCreate: ABAP is active
DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
Fri May 2 19:41:30 2008
M *** ERROR => ThCheckReqInfo: message send/receive failed [thxxhead.c 17386]
M
- Need a help
Thank you -
Can't install Snow Leopard on Macbook Pro MC700 - 3 beeps after installer starts.
can't install Snow Leopard on Macbook Pro MC700 - 3 beeps after installer starts (10.6.3 retail). Lion installer starts normally. What's a problem?
I have the same trouble, I try installing rEFI but when I try start my Pro from DVD doesn't recognize.
Can I start from USB Memory? with files from SL DVD? or have some thing else?
I have original DVD of SL 10.6.3, if I buy the latest stable version, can I install? or the EFI firmware with Lion change again?
I try to use Lion, more than one week but I can't, and some app that I use for my profession, doesn't work, I really need downgrade to SL.
Really Thanks for any help.
Pablo -
I have 2 Apple ID"s, one for buying app's (since the first iPhone) in the store and another one for operating with iCloud things. Now, after installation/activation of my new iPhone 5s, the Touch ID is connected to the iCloud world. Conclusion, if I like to buy a new app. I still have to fill in the password for the other Apple ID. In the past I asked Apple to may join both, but that seems to be impossible.
Anyone a solution?I am logged into the same things on both my iPhone and my MacBook Pro, except for mail. I use a gmail IMAP account and everything there already works on both machines. The iCloud account on my iPhone uses one Apple ID and the one on the Mac uses the second Apple ID.
-
How can I perform a silent install of an application AND use "run executable after installation"
I am trying to do a silent install of a program I built using LabVIEW 8.5. I also need to call an exe after the installation, so I am using the "run executable after installation" option on the Advanced tab of the installer. I then pass the following command lines to the setup.exe:
/qb /acceptlicenses yes /r
This installs the LabVIEW program successfully, but does not then run the additional exe afterward. If I run the setup.exe normally (with no command line parameters), the additional exe gets run.
Thanks,
Jasonjmburns wrote:
I am trying to do a silent install of a program I built using LabVIEW 8.5. I also need to call an exe after the installation, so I am using the "run executable after installation" option on the Advanced tab of the installer. I then pass the following command lines to the setup.exe:
/qb /acceptlicenses yes /r
This installs the LabVIEW program successfully, but does not then run the additional exe afterward. If I run the setup.exe normally (with no command line parameters), the additional exe gets run.
Thanks,
Jason
This problem is fixed in a future release of LabVIEW. Here's the CAR ID 67549 for tracking purposes.
Message Edited by Bob P on 07-10-2008 09:10 AM -
SharePoint Designer 2013 after installation getting error with runtime i.e. error writing to file Microsoft.SharePoint.Client.Runtime.Local.Resources.dll Verify that you have access to that directory
after retry..again SharePoint Designer requires the following component require to install Microsoft.NET framework version 4 i have downloaded and try to installed but fail not work please answer what to do?
Thanks and Regards, Rangnath MaliHi Rangnath,
For running SharePoint Designer 2013, you need to install Microsoft .NET 4.0 Framework or higher.
Please uninstall the Microsoft .NET 4.0 Framework, and install it again. After that, reboot your machine.
Best Regards,
Wendy
Wendy Li
TechNet Community Support -
Did anyone buy a MacBook Pro Retina 13" from Best Buy this Black Friday?
I'm having an issue where the WiFi disconnects after the MacBook wakes from sleep but only after a couple of minutes.
Once the WiFi disconnects, I can't reconnect to the same network and sometimes it won't find nearby networks.
I have to turn off the WiFi and wait for at least 5 seconds before turning it back on for it to auto-reconnect to my home network.
If I wait less than 5 seconds, it will continue to attempt connection to the home network but won't connect.
I've tried reformatting and deleting my network configurations as well as resetting my modem, power cycling it, etc.
I am using 2Wire Gateway modem/router from AT&T on b/g network.
I've tried connecting to a friend's network under Time Warner Cable and the same issue occurs.
I exchanged the MacBook at a Best Buy for a brand unopened one (I hope) and the same exact thing happens with this new one.
Really, I can't be the only one with this issue. Unless in a 0.00001% chance I received two defective units in a row?
Please.. does anyone have a clue why this is happening?You're definitely not the only one. I have the same issue. I spent 6 hours over multiple days on the phone with Apple support trying a variety of things (some of which are mentioned above), and none of them worked. They finally sent me a replacement laptop. I made sure to try it periodicaly as I was moving files and installing applications to see if I ran into it again and things seemed okay at first but now I am running into the same issue and it is terribly annoying. I've got 5 other devices that connect to the same router and I've never had this issue with any of them.
My router is a Linksys E2000. I haven't tried changing the router channel but I have tried to cnnecting to other networks in the building I live in and I have run into the same issue there.
Maybe you are looking for
-
Only Plays One Song at a Time ???
I'm trying to listen to albums in my library but iTunes will only play one song at a time, very annoying to have to down arrow and click play after every song. How can I make iTunes play through my library without stopping? I'm using iTunes 10.1 (54)
-
String operations on internal table text....
Original table is consists of 2 columns: E RFC error(SM_DHTCLNT010_READ): Error when opening connection E RFC error(SM_DHLCLNT010_READ): Error when opening connection E RFC error(SM_DHKCLNT010_READ): Error when opening connection E RFC error(
-
Customer/Vendor Down Payments (Raise & Post)
Hi Friends, Question: I am technical guy, now i want to know how to raise a vendor/customer down payments & how to clear those in FICO. I tried in F-47, F-54, F-32, F-53...... but i didn't get the correct way. Doing: My intention is, i am generating
-
Commons fileupload to delete a file
Has anyone used the jakarta commons fileupload package to delete a file? Is it possible? There is a delete() method in the package, but I can't get it to work. Does anyone have any ideas?
-
Digimarc watermarking as part of Lightroom Export
I would *love* to see Lightroom and Digimarc get together to create an "embed Digimarc watermark" in the Export dialog box. It would be incredibly powerful and would allow photographers to batch resize and embed the digimarc watermark in one step to