Admin node in Multi node Configuration

Hi,
Admin used to apply patches / run ad utilities and to run the upgrade tools.
If we only one MT then that will be the Admin node.
In my Case i am having the 2 middle tier nodes and 1 DMZ node and all all nodes having the
s_isAdmin variable ' YES ' in Context file.
In this case from where i need to run the .patches / run ad utilities and to run the upgrade tools ?
EBS version: 11.5.10
--Thanks
Vijay
Edited by: Vijay.Cherukuri on Aug 10, 2012 4:05 PM

Thanks for your reply Husein,
I have checked the mount points on all application nodes.
The APPL_TOP mount point is comming from (/test/applmgr) from same mount point (same filer )across all the nodes.
My other Question is
In case of non shared APPL_TOP , Admin should come from all nodes right ?
Means we need to apply patches or need to do upgrade on all nodes separately ?
Please correct me if I am wrong.
--Vijay..                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   

Similar Messages

  • R12 Single node to Multi-node Configuration

    Hi All!
    We have a single node setup (Applications and Database are on the same server). Now, our management decided to setup a Multi-node configuration and i'm the one who will do this.
    The plan is to use Oracle ASM and RAC for the database and for the Application is to have a multiple application servers. For the database, we will be using a minimum of 3 servers and another 3 servers for the application. Is this possible? How can this be done. Can someone point or give some link or infos on how to do this. We're going to use the existing data on the single node server.
    Thanks and Regards,
    cmadiam82

    Hi,
    We have a single node setup (Applications and Database are on the same server). Now, our management decided to setup a Multi-node configuration and i'm the one who will do this.Contratulations. This is a good oppurtunity.
    The plan is to use Oracle ASM and RAC for the database and for the Application is to have a multiple application servers. For the database, we will be using a minimum of 3 servers and another 3 servers for the application. Is this possible? How can this be done. Can someone point or give some link or infos on how to do this. We're going to use the existing data on the single node server.For a start you can read
    http://gjilevski.wordpress.com/2009/12/13/rac-enabling-ebs-12-1-1/
    http://www.appsdba.info/index.php?module=pagemaster&PAGE_user_op=view_page&PAGE_id=52&MMN_position=44:44
    http://www.appsdba.info/index.php?module=pagemaster&PAGE_user_op=view_page&PAGE_id=61&MMN_position=57:57
    Thanks

  • Doubt Regading Admin Node

    Hi,
    One of my friend was saying that, In Multi Node Installations, wherever CM Services are running, Admin Node better to be there on that machine. we can have DB, CM on one machine and other ADMIN, FORMS and web services on another machine. In what perspectice he told, i id not understand. is it might be Performance perspective?
    what do you say friends?
    Edited by: oraDBA2 on Jan 1, 2009 1:37 PM

    It really does not matter anymore on which node (of a multi-node install) the admin server resides on. The concept of admin server is becoming obsolete since all of the ad utilities (adadmin, adpatch etc) can be run on all nodes. Pl see page 1-23 of the R12 Concepts manual at http://download.oracle.com/docs/cd/B40089_10/current/acrobat/120oacg.pdf.
    HTH
    Srini

  • Log files under the admin node are getting filled up

    I installed Sun One Web Server 7.o u3 in the following way:
    a. Installed admin server on MC1
    b. installed admin node on MC2.
    c. When I started MC1 and MC2, the access log file (C:\Program Files\Sun\WebServer7\admin-server\logs) under the admin node MC2 is getting filled up with these messages for every 2 minutes:
    MC1 IP ADDRESS - CN=admin-client-cert [24/Mar/2010:18:03:46 -0400] "POST /jmxconnector/remotejmx HTTP/1.1" 200 291
    I checked for errors file under the admin server, and I did not see any errors, as such. Please help me to fix the problem. I installed node and server, as per guidelines
    I have not installed any web app or deployed any config.
    Thanks,
    Phani

    Joe,
    That worked. Thanks a lot. 1 more thing. I made a new configuration, while migrating 6.1(SP2) instances.After deploying on MC1/MC2, and when I am trying to start the configuration on the instances, it is giving the following errors for both nodes MC1 & MC2:
    ADMIN3584: Error while starting the server. Please check the server logs.
    I ran the log mode with 'finest' level and it is showing following exceptions:
    25/Mar/2010:17:55:28] fine ( 6044): for host 10.248.131.38 trying to POST /admingui/admingui/startInstances, service-j2ee reports:
    com.sun.web.admin.exceptions.AdminException: ADMIN3584: Error while starting the server. Please check the server logs.
         at com.sun.web.admin.mbeans.AgentMBean.startServer(AgentMBean.java:212)
         at com.sun.web.admin.mbeans.AgentMBean.startServer(AgentMBean.java:198)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:585)
    [25/Mar/2010:17:55:28] info ( 6044): for host 10.248.131.38 trying to POST /admingui/admingui/startInstances, service-j2ee reports: Exception : ADMIN3011: The operation failed with errors on the following nodes:
    Node 'MC1.test.com':
    ADMIN3584: Error while starting the server. Please check the server logs.
    [25/Mar/2010:17:55:28] fine ( 6044): for host 10.248.131.38 trying to POST /admingui/admingui/startInstances, service-j2ee reports:
    com.sun.web.admin.exceptions.MultiNodeException: ADMIN3011: The operation failed with errors on the following nodes:
    Node ''MC1'
    ADMIN3584: Error while starting the server. Please check the server logs.
         at com.sun.web.admin.mbeans.NodeMBean.doLifecycleAction(NodeMBean.java:84)
         at com.sun.web.admin.mbeans.NodeMBean.startServer(NodeMBean.java:299)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:585)
         at com.sun.web.admin.mbeans.BaseAdminMBean.invoke(BaseAdminMBean.java:49)
         at
    Any help on this issue is appreciated.
    Thanks,
    Phani

  • Changing heap memory paramter  and Additonal Java node configuration

    Hi All,
    Kindly provide me the procedure to change the heap memory parameter and location (in Visual admin). How to install/configure 2nd Java server node in PI system.
    Thanks in advance.

    Hi Ramesh,
    You would have posted this question in Netweaver Administrator forum...
    Well here are the answers.
    Login to Configtool.
    Expand Cluster-Data->instance<xx>->dispatcher. On the right hand side you can change the heap size for the dispatcher
    Follow the same procedure to increase the server heap memory.
    To add the server node click on instance<xx>. Then click Server->Add server.
    Cheers....
    Raghu

  • Admin Node Hanging when Monitoring Cluster in Console

              I'm running into a very unusual situation with my cluster. The administrative node
              is failing. I'm running all of my nodes as background services. The admin node
              usually fails after about an hour. That's usually after all of the nodes are completely
              up.
              The only application deployed to the admin is the console.war. I typically will
              log into the console and monitor the progress of all of my managed nodes starting.
              I typically go to the server tab a watch all of my nodes change from Red to Green.
              I do this by clicking the refresh icon. It refreshes every ten seconds. Once I
              close my browser and reattempt to log back into the console, it ends up hanging.
              I log onto the server and notice that there are no errors in my log files, and
              that the beasvc.exe is still running for the admin. All indications are that it
              is running. The only way to resolve the issue is to kill the service and restart
              it. I've tried to replicate this in the foreground, but I get a similar error.
              The admin node fails and in the dos command window, I get the following error
              at the bottom of my thread dump:
              "# An unknown exception code exception has been detected in native code outside
              the VM. # Program counter=0x77fb16cc"
              

    JDK 1.3.1_02 is certified for WLS 6.0 SP2 on Solaris only.
              Kumar Allamraju wrote:
              > what version of JDK?
              > I presume you are using the JDK s hipped with WLS.
              > If yes, we have seen JVM crashing at other customer sites.
              >
              > I would suggest you to try a new JDK (preferably 131_02) and see
              > if that makes any difference. Until we see thread dumps we cannot
              > really figure out the problem in WLS, so pls make sure that the JVM
              > is not crashing.
              >
              > --
              > Kumar
              >
              > Steve Feldman wrote:
              >
              > > I'm running into a very unusual situation with my cluster. The administrative node
              > > is failing. I'm running all of my nodes as background services. The admin node
              > > usually fails after about an hour. That's usually after all of the nodes are completely
              > > up.
              > >
              > > The only application deployed to the admin is the console.war. I typically will
              > > log into the console and monitor the progress of all of my managed nodes starting.
              > > I typically go to the server tab a watch all of my nodes change from Red to Green.
              > > I do this by clicking the refresh icon. It refreshes every ten seconds. Once I
              > > close my browser and reattempt to log back into the console, it ends up hanging.
              > >
              > >
              > > I log onto the server and notice that there are no errors in my log files, and
              > > that the beasvc.exe is still running for the admin. All indications are that it
              > > is running. The only way to resolve the issue is to kill the service and restart
              > > it. I've tried to replicate this in the foreground, but I get a similar error.
              > > The admin node fails and in the dos command window, I get the following error
              > > at the bottom of my thread dump:
              > >
              > > "# An unknown exception code exception has been detected in native code outside
              > > the VM. # Program counter=0x77fb16cc"
              > >
              Rajesh Mirchandani
              Developer Relations Engineer
              BEA Support
              

  • ISE Admin node Replication error

    Hello Everyone,
    I receive this alarm some times:
    Alarm
    Occurred At:
    Wed Mar 20 09:20:10 BRT 2013
    Cause:
    Replication Stopped
    Details:
    Replication Stopped for the host PANVMGP3301B(Secundary Admin node)
    Today i go to Administration -> System -> Deplyment and i can see my secundary Admin/Monitoring node with status "REPLICATION DISABLED" see the attach image.
    I can force the sync for the Primary and Secundary Admin Nodes? How i can fix this?
    Tks!

    Yes, something prevented your nodes from staying in sync and as a result, the nodes stopped trying to syncup. You will need to manually sync the nodes. Go to Administration > Deployment. Then select/check all of the nodes and click on the "Syncup" button above the personas.
    Thank you for rating!

  • Adding license to an ISE secondary admin node

    We have an ISE cluster with the license installed only on the primary admin node (generated on its UDI).
    If we later have to promote the secondary admin node to be the new primary admin node (for some reson), then we need to have a valid license on that node generated with its UDI, right?
    Is it possible to install the secondary admin UDI license from the primary admin node or do we have to deregister the secondary admin node from the cluster and then install the license on that node in standalone mode ?

    You could also re-host the license to the new (promoted) node.  The steps are detailed here:
    https://supportforums.cisco.com/discussion/12378756/cisco-ise-migration-vm-sns-3415-appliance
    Please Rate Helpful posts and mark this question as answered if, in fact, this does answer your question.  Otherwise, feel free to post follow-up questions.
    Charles Moreton

  • Nodes in RAC One Node configuration

    Dear all,
    11.2 on Windows 2008
    What is the maximum number of nodes we can have in RAC one node configuration ?
    Yoosuf

    Thanks Rafi and Sorry for not making it clear.
    The whole configuration will be rac one node (With 4 nodes) with out dataguard implementation.
    If the primary site goes down(s1,2 and storage) , can the secondary site wil be up automatically (s3,4 and storage). Please note storage is with ASM (normal redundancy ) primary storage at Head office and Secondary ASM storage at DR
    Thanks

  • What runs on admin node ??

    Hi...
    I've been thru concept doc and other resources, but, haven't been able to understand what services will run on an Admin server. say
    DB node - Database services
    Concurrent Proc'ng node - Concurrent mgr + FND Listener
    Now here is where confusion arises , pls calrify, if following services run on these nodes or not
    Admin node = ( as gud as Concurrent processing node, so concurrent mgr + FND Listener) ???
    Web Server = Pretty much Apache only
    Forms Node = Again Apace
    Report Server = RRA
    Many Thx..
    Romit

    The administration server contains the files and processes used to perform patching and other maintenance tasks. It is located on the node from which you maintain the data model and data in your Oracle Apps database. You can perform the following operations from this server:
    - Applying database patches to Oracle Applications (use adpatch)
    - Maintaining Oracle Applications data (use adadmin), examples of the tasks which should be run on the admin node only are:
    * Compile APPS schema
    * Compile menu information
    * Compile flexfield data in AOL tables
    * Reload JAR files to database
    - Upgrading Oracle Applications (use the AutoUpgrade utility (adaimgr) to upgrade Oracle Applications from 10.7/11.0.X to 11i).

  • ISE 1.2 AUP Multi-Portal Configuration

    Currently we have ISE 1.2 configured using a multi-portal configuration.  We use a guest portal for both Guest Access and for devices we consider non-compliant employee.  Guest users are authenticated against an inernal user database in ISE, and the company owned devices auth against AD.  If we login with a guest account that was created using the sponsor portal, we do not get the acceptable usage policy to check before getting access. If we login using the AD account, we do get the Acceptable Usage Policy to check before getting access.  It appears this is the same portal, so why do we not get it for both?

    for guest AUP configuration
    AUP for posture assesment config

  • How to create a multi-level configuration sales order?

    Hi,
        My client use configurable material to sell computers. And the production mode is MTO. One sales order item correspond with a production order
        Now my client also sell array which consist of two computers, two storage, one UPS power etc. That means I must realize multi-level configuration. First, choose the computer type. Second, based on the choosed computer in first step, choose the cpu, disk and so on. And then based on the sales order item, there must be several production order related to the same sales order item.
        Now I have semi-finished product B1,B2--computer. Class type is 300. Many characteristics is allocated to the class. B type material has the BOM which consist of cpu,disk etc.
        Then I created the finished product A--array. Class type is 300. Allocated characteristics is the B1,B2. A has the BOM which consist of B1,B2 etc.
        When I create sales order, I can only config the first level,choose computers for A, can not choose cpu,disk for computers.
        So, how can I find a solution for this scenario?
        Thanks in advance.

    Thanks, Waza
    1.  Does the Sales order BOM explode in the sales order?
    No. Just one top item would be ok for my client.
    2. Why do thy want this in the sales order?  They can explode the BOM in the production order, do they then need pricing at the component level?
    They do not need pricing at the component level. Exploding the BOM in the production order is acceptable. But how can I config the configurable material in components of production order?
    I tried collective order, but the second level of configurable material can not generate production order. I just make use of special procurement 52 in MRP2 of top finished product. Is there something I missed?
    Thanks again.

  • T430s - cannot get supported multi-monitor configuration to work

    Hi all,
    I just purchased a new T430s and, overall, I've been very happy with it.  However, I'm having trouble getting a particular multi-monitor configuration to work.  Very simply, I am trying to get the very first configuration as is described on this page...
    http://lnv.gy/15YWJnf
    It is simply a 3-monitor setup where one monitor is external and hooked up via VGA, another monitor is external and hooked up via DisplayPort, and the third monitor is the actual laptop monitor.  I simply cannot get this to work!  I can plug in a single external monitor, but when I try and plug in a second, it always disables my laptop monitor, so I end up with only a 2-monitor setup.  Can anyone please help?
    *Also, I should note, I've called Lenovo Support 3 times after encountering this problem, and, suffice it to say, it was an EXTREMELY frustrating and discouraiging experience.  All in all, I spent over 2 hours on the phone and each time, they essentially REFUSED to help me!  They kept citing that it was a "configuration" issue and that it's not their problem, and then they'd forward me to another department which would then forward me right back to them.  At one point, one rep said that I was essentially "**bleep** out of luck".  Furthermore, when I was getting frustrated with the lack of help, I asked a rep to escalate the issue and allow me to talk to a manager.  He said that he COULDN'T DO IT because the system wouldn't allow it, again, citing that it's a configuration issue and not their responsibility!  Does anyone from Lenovo ever read these forums?  Will someone PLEASE take ownership of this issue and help me out?  I'm not asking for much!  I just want to get a setup that you guys say is supported!
    Sorry for the rant, but my interactions with Lenovo support have really been frustrating.  Anyways, any help would be much appreciated.  Thanks in advance!
    Charles
    Solved!
    Go to Solution.

    whoischarles,
    Welcome to the forum!  Thanks for the question and  tweet about this thread.  Thanks Lead_Org for getting us started... I know you have tried out a number of multiple display configs, so you may have some follow up suggestions....
    As far as I know...
    The T430s supports external displays a little differently than the T420s did, and differently than the T430 and T530 do.  There are a number of different discussions on T430s multiple display configs in the forum - you might search a few and just browse them to see the combinations others have tried and their experiences.  Here is one example.  Here is another more recent.
    Here is another more recent.
    Here is an official tip with specific configs that Lenovo supports for the T430s.
    From our official tip, it appears that you cannot have both the LCD and external VGA and displayport.  I think you can have 2 external displayport displays and either a 3rd external via VGA port, or the built in LCD.   I remember trying out some of these a year or so ago, and I seem to recall that you needed a dock to get 3 external, or 2 external and the internal LCD to work on the T430s. 
    Best regards,
    Mark
    ThinkPads: S30, T43, X60t, X1, W700ds, IdeaPad Y710, IdeaCentre: A300, IdeaPad K1
    Mark Hopkins
    Program Manager, Lenovo Social Media (Services)
    twitter @lenovoforums
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • Using Basic or Multi-tier configuration for WLS Clusters...

    Ok,
              The scenario is: I'm using WLS6.1 (hopefully, version doesn't matter here)
              with three instances clustered. Each instance provides all Services:
              Servlets / JSPs/ EJBs / Database communication... I'm using the Basic
              configuration described on the BEA documentation....
              Now, I want to move forward to a Multi-tier configuration, where the first
              layer will serve Servlets and JSPs and the second layer will serve EJBs.
              The problem: On the first scenario, I was looking EJBs with the Default
              InitialContext() constructor without the environment, since everybody was on
              the same JVM...
              What do I have to do, so my Servlets start looking for EJBs on the second
              cluster now? Do I have to re-write every single lookup? Can I use a
              jndi.properties file on the first layer - on the presentation tier?
              Thanks in Advance,
              Marcelo.
              

              Thanks Patrick!
              But my actual problem starts here. The Servlets aren't mine. We have to support
              applications which run atop our product(which is a bunch of beans+RMI Objects
              running on the top of WLS) in a backward compatible way with a standalone.
              Will try and make a post if I can find a 'configurable' way out.
              Harish
              Robert Patrick <[email protected]> wrote:
              >Put the other server's PROVIDER_URL in a system property, property file,
              >whatever and
              >have the servlets explicitly use it when creating the InitialContext
              >to talk with the
              >other server...
              >
              >Harish Vajha wrote:
              >
              >> Hi Cameron,
              >>
              >> A -Djava.naming.provider.url nor jndi.properties would work. The problem
              >is like
              >> this:
              >> Say I have two WL servers hosting just EJBs: E1, E2. And I have a single
              >WL Server
              >> hosting just servlets: S1. Now I give the -Djava.naming.provider.url=E1(using
              >> http or t3) (or I provide the same thing using my own jndi.properties).
              >>
              >> The problem with this setup is that while starting up, the Server will
              >try binding
              >> every object(including the System bindings like wl.transaction.TransactionManager,
              >> wl.common.T3Services) to the other NS (in this case E1's naming service)
              >which
              >> is bound to fail, as they're already bound in that Server.
              >>
              >> The solution has to be a way to specify the java.naming.provider.url
              >only for
              >> the servlets (or the web app).
              >>
              >> Any ideas on how to provide a Webapp specific lookup address?
              >>
              >> Marcelo, if you've found a way out to separate, pl. make a post.. Thanks!
              >>
              >> Harish
              >>
              >> "Cameron Purdy" <[email protected]> wrote:
              >> >Hi Marcelo,
              >> >
              >> >With Weblogic, your performance will typically decrease if you go
              >the
              >> >route
              >> >that you are describing.
              >> >
              >> >Yes, you can do jndi.properties, however I believe you will find it
              >inside
              >> >one of the WL jars.
              >> >
              >> >Note that you can use java -D instead to define some of the JNDI properties
              >> >to point to the other cluster, but I can't remember them off-hand.
              >> >
              >> >Peace,
              >> >
              >> >--
              >> >Cameron Purdy
              >> >Tangosol Inc.
              >> ><< Tangosol Server: How Weblogic applications are customized >>
              >> ><< Download now from http://www.tangosol.com/download.jsp >>
              >> >
              >> >
              >> >"Marcelo Caldas" <[email protected]> wrote in message
              >> >news:[email protected]...
              >> >> Ok,
              >> >> The scenario is: I'm using WLS6.1 (hopefully, version doesn't matter
              >> >here)
              >> >> with three instances clustered. Each instance provides all Services:
              >> >> Servlets / JSPs/ EJBs / Database communication... I'm using the
              >Basic
              >> >> configuration described on the BEA documentation....
              >> >>
              >> >> Now, I want to move forward to a Multi-tier configuration, where
              >the
              >> >first
              >> >> layer will serve Servlets and JSPs and the second layer will serve
              >> >EJBs.
              >> >>
              >> >> The problem: On the first scenario, I was looking EJBs with the
              >Default
              >> >> InitialContext() constructor without the environment, since everybody
              >> >was
              >> >on
              >> >> the same JVM...
              >> >> What do I have to do, so my Servlets start looking for EJBs on the
              >> >second
              >> >> cluster now? Do I have to re-write every single lookup? Can I use
              >a
              >> >> jndi.properties file on the first layer - on the presentation tier?
              >> >>
              >> >> Thanks in Advance,
              >> >> Marcelo.
              >> >>
              >> >>
              >> >
              >> >
              >
              

  • Multi-machine configuration

    how do i configure the Master and other machines in a Multimachine configuration.
    i have 10 machines.
    In RESOURCES
    MASTER appsvr_1 appsvr_2
    MACHINES
    byspa01 LMID=appsvr_1
    byspa02 LMID=appsvr_2
    byspa02 LMID=appsvr_3
    Is this a right configuration?
    Or should LMID be same as Master? PLease advise.
    Thanks
    sushil.

    This is a very general question. I'd recommend the documentation section at
    http://e-docs.bea.com/tuxedo/tux81/ads/adfig.htm#1253022 for a good overview
    of how to set up a multi-machine configuration file.
    Also, you may want to work with some of the Tuxedo sample applications to
    get a feel for how to set up a Tuxedo configuration file. The bankapp
    sample application located in $TUXDIR/samples/atmi/bankapp has a 2-machine
    configuration and is a good application to gain familiarity with Tuxedo in a
    multiple machine environment.
    <Sushil More> wrote in message news:[email protected]..
    how do i configure the Master and other machines in a Multimachineconfiguration.
    >
    i have 10 machines.
    In RESOURCES
    MASTER appsvr_1 appsvr_2
    MACHINES
    byspa01 LMID=appsvr_1
    byspa02 LMID=appsvr_2
    byspa02 LMID=appsvr_3
    Is this a right configuration?
    Or should LMID be same as Master? PLease advise.
    Thanks
    sushil.

Maybe you are looking for