Adobe 9 will not use the default voice, only Microsoft Sam?

hi have adobe reader 9 installed AT&T Crystal voice. set as default. BUT adobe 9 only recognizes, Microsoft Sam. how to change? thanks

hi have adobe reader 9 installed AT&T Crystal voice. set as default. BUT adobe 9 only recognizes, Microsoft Sam. how to change? thanks

Similar Messages

  • HT3986 I have a pc that is one year old and the hard drive is crashing we use it only for quick books to run our small business I would like to buy amac and install the OS  forom the pc to the apple product i will not use the pc after can i use the OS off

    I have a pc that is one year old and the hard drive is crashing we use it only for quick books to run our small business I would like to buy a macmini and install the OS  from the pc to the apple product i will not use the pc after, can i use the OS off the pc or do I have to purchase another?

    I think you can get Windows 7 for around $99. Install the 64bit version as the 32bit version will not be able to use all your new computer's ram if you have more than about 3.5gb.
    Back up your quick books data now before the old hard drive dies. You can copy your data over to your new installation of Windows and quick books.
    By the way, there is quick books for Mac http://quickbooks.intuit.com/mac/?sc=BNR-000-COR-quickbooks&priorityCode=4902000 000&cid=ppc_google_QB-Intuit-Core-Brand-Mac_quick-books-for-mac_exact&site=&ad_i d=9347918288&raw_keyword=quick%20books%20for%20mac
    So you may not need to install Windows at all.

  • I have a new laptop and want to keepon using  Adobe Pro X. I have downloaded the programe but adobe will not accept the serial number although I am a registered user .

    I have a new laptop and want to keepon using  Adobe Pro X. I have downloaded the programe but adobe will not accept the serial number although I am a registered user .

    Hi tapanb34358563,
    Could you please let me know what error prompts on your screen when you are trying to enter the serial number.
    Have you bought subscription for Acrobat, if yes then you might need to sign in at "adobe.com" using your Adobe ID credentials to activate subscription.
    Let me know.
    Regards,
    Anubha

  • My iPhone will not use the 3G network.

    My iPhone will not use the 3G network. I have to turn it off in the settings. Then my phone will connect to the E network. This is the only way I can make calls. Does anyone know why?

    I am in Utah and with AT&T. I was able use 3G for about 6 months and then it just stopped. I took it to the apple store and they said it was an AT&T issue. I went to AT&T and they said it was an Apple issue. I had the SIM card replaced ands that still didn't work. It wasn't until I turn off the 3G that I was able to make calls again. Now I'm just on the E permanently.

  • HT201209 iTunes will not use the redeemed gift cards on my account, I have a $30 credit and when I try to purchase a song it goes right to my credit card on file. Why does this keep happening

    iTunes will not use the redeemed gift cards on my account, I have a $30 credit and when I try to purchase a song it goes right to my credit card on file. Why does this keep happening???

    Any time you've changed anything in your billing, it does this once to very things.

  • Excel 2010 not using the default print settings

    Currently got an issue with Excel 2010 not using the default print settings for a couple of users on our network,
    basically when pressing cntrl P or selecting the print option from the file menu the printer settings are different to the print settings selected in the devices and printers menu, we have checked the print drivers etc but this has still not resolved the
    issue, all other office programs are fine and also other users are reporting this issue more and more with different printers,
    tried restarting print spooler service and re-installing office but this has come to no avail,
    any ideas would be much appreciated!

    Hi,
    This issue occurs because the Page Setup settings that you specify in your file override the settings that you specify in the printer driver properties.
    To work around this issue, do not specify the paper size, page orientation, or page margins in the printer driver properties. Instead, specify these settings in your workbook.
    To specify these settings, follow these steps:
    1.Start Excel, and then open the workbook you want to change.
    2.In Microsoft Office Excel 2010, click the sheet that you want to print, and then click the Page Layout tab. In the Page Setup group, click Page Setup to open the Page Setup dialog box.
    3.Click the Page tab.
    4.Under Paper size, click the paper size that you want.
    5. Click Options button and in Printing Shortcuts tab, in the Paper source area, perform one of the following steps:  ◦If the printer can automatically select the correct paper tray to use, click Default tray in the First page list, and then click Default
    tray in the Other pages list.
    Default tray is the default setting in both of these lists.
    ◦If the printer cannot automatically select the correct paper tray to use, you may have to select the paper tray that contains the paper size that you selected in step 4.
    To do this, click the appropriate paper tray in the First page list and in the Other pages list.
    6.If you want to change the page orientation or its page margins, click the Finishing tab.
    7.Select the options that you want.
    8.Click OK.
    9.Repeat steps 2 to 8 for each sheet of your workbook for which you want to specify settings.
    Jaynet Zhang
    TechNet Community Support

  • After my hard drive crashed and had to be replaced, Adobe will not activate the copy of Photoshop on the same machine it was originally on.  I paid for it, why can't I use it?

    I have been buying and using Adobe Photoshop through numerous versions over the past several decades. and I used to recommend it whenever I had an opportunity. Now I wouldn't recommend it to my worst enemy.  I could say a lot more than that, using words my parents taught me to not use.
    Adobe now has their head in the clouds and doesn't care a whit about faithful customers.
    I had CS3 on one machine, CS4 on another, and CS6 on another one. The hard drive on the machine with CS3 and had to be replaced.  I am trying to install CS3 back on the same computer, but Adobe will not let me activate it, even though I am trying to put it on the computer it was originally on.  I paid for it, I have gone by the rules, and Adobe will not even talk to me.  And as far as I can determine, Adobe is so far out in the clouds that it has nothing but contempt for the people that kept them in business for decades!
    What I would really like to do is move CS4 onto the machine that originally had CS3 on it, and put CS3 onto the machine that now has CS4, but I assume nobody at Adobe cases what I would like, even though I paid for the software and have no intention of trying to have it installed on more than one machine at a time.
    An Unhappy FORMER Adobe customer.
    R.G. Dean

    Gene,
    Thanks for your input.  The first response was from Semaphoric, and the suggestion to go to Activation  <https://urldefense.proofpoint.com/v2/url?u=http-3A__helpx.adobe.com_x-2Dproductkb_policy-2 Dpricing_activation-2Ddeactivation-2Dproducts.html&d=AAMFaQ&c=2X_btuPRWkGwRX26NHIotw&r=SV2 7JiUdsqdd_EMOf-dq7w&m=ZZ3uTbq0aPS1gp4Hdc7Kfaq1cjXsUii7RKXoXvqBPGg&s=c6eaD33CSBrFAMNKsC0pPB qnQK4DfAG7wMSJ6E27pyU&e=> & Deactivation Help proved to be helpful.  I was never able to activate CS3 on the computer it was on originally, but I had been unaware that a license allowed installing on two computers if only one is in use at any time, so I uninstalled CS3 and installed CS4 on the old computer, so I am happy about that. 
    When I get time, I will try to install and activate CS3 on my laptop computer.  I thought about trying to install CS6 on the old computer, but CS6 is on my wife’s computer, and we are often both using Photoshop at the same time.  I will probably install it on her notebook computer – if they will let me.
    Thanks again,
    RG

  • List users of specific databases that are not using the default storage quotas

    I have an Exchange 2010 SP3 DAG with 4 databases. I am trying to use powershell to find out, per database, which mailboxes are
    not using the "mailbox database defaults", which is unlimited in this case (no quotas for Issue warning, Prohibit send, and Prohibit send and receive).
    Something like "get-mailbox | where  {$_.UseDatabaseQuotaDefaults -ne $true} will not work because I just want the data for specific databases".
    I have also tried "get-mailbox -database nameofdatabase | where {$_.UseDatabaseQuotaDefaults -ne $true} | out-file c:\temp\nameofdatabase.tx" but it lists some users that show unlimited for all categories and others some that have limits on certain
    other ones. In short, it is not correct.
    HDL

    Hi,
    From your description, I would like to clarify the following thing:
    Running the Get-Mailbox -Database MBX1 | Where-Object {$_.usedatabasequotadefaults -eq $false} cmdlet will list all mailboxes who have a custom storage quota. But it only displays the value of ProhibitSendQuota. You can check the values of other storage
    quotas via EMC.
    EMC -> Recipient Configuration -> Mailbox -> double click the mailbox -> Mailbox Settings -> Storage Quotas
    Hope my clarification can be helpful to you.
    Best regards,
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
    Amy Wang
    TechNet Community Support

  • WET54G v3.1 Will not accept the default password for web setup

    The setup:
    1 2WIRE wireless router for AT&T DSL connection
    1 wireless laptop, online and good to go
    1 desktop, too far from router to connect with an ethernet cable, this computer does not have wi-fi
    1 new WET54G v3.1, trying to setup as a wireless-ethernet bridge to get the wired desktop on the network and online
    I have set up the desktop with static IP: 192.168.1.1; Subnet 255.255.255.0; Gateway 192.168.1.226.  The WET54G is directly connected to the desktop.  I open Internet Explorer and go to 192.168.1.226.  After entering the password "admin" and leaving the username blank, the login prompt simply reappears as if the password is incorrect.  I have reset the WET54G to factory defaults numerous times (held the reset button for over 30 seconds).  It simply will not accept the password.
    Any suggestions?  I tried live chat but the chat window was so slow and buggy that both times it seemed we were about to make progress the window would freeze up or refresh entirely and disconnect me.  Extremely frustrating to say the least.
    Thanks,
    Sean

    Hi brickmonkey, 
    Sorry for taking so long to get back on this.  We left for a long vacation and I got ridiculously busy when we got back.  ANyway I just spent some time working on this and wanted to report back.  Still didn't get it to work.
    Got into the 2Wire and wrote down it's settings:
    Router Address: 192.168.1.254
    Subnet Mask: 255.255.255.0
    Default Gateway: (???) I did not see this under the summary page, but it was on the internet connection details page., it's a 151.x.x.x number, which the WET54G was not happy to accept as the default gateway.  It gave me the error "DUT and Gateway cannot locate in different subnet."  Also, on that internet connection details page, an additional subnet mask of 255.255.255.255 was listed, but I'm guessing 255.255.255.0 is the correct one to use, right?
    Because it wouldn't accept that 151.x.x.x address, I can't get any farther.  I did notice when setting up the SSID and security to match that of the 2WIRE, the channel was fixed at 6 and the dropdown was disabled.  I changed the 2WIRE from 1 to 6 in case that was an issue.  The WET54G is in Infrastructure mode, as the guide you linked to indicated.
    Any thoughts with this new info?
    Thanks again for your help with this,
    Sean

  • ICal not using the default email application?!??

    Hello,
    I use Thunderbird as my default (and only) email application. In the preferences of Apple's Mail application, I selected Thunderbird as the default email reader.
    However, when sending email from iCal, it attempts to use Mail, not Thunderbird?!? This happens both when emailing an event and when sending an invite for a published calendar.
    How do I make iCal use Thunderbird for sending mail?
    Tried searching the forum and Apple Support site, but failed to find an answer.
    Thanks,

    I am also now having this issue. I didn't have this problem previously. Other apps (e.g. AddressBook) are using my default mail program, but iCal strongly prefers Mail.app? I am seeing this on my laptop that I don't use as often, but will confirm on my desktop machine tomorrow ...

  • Stagewebview is not using the default browser?

    Hello community,
    We encounter an issue regarding the userAgent we get with Javascript when our page is viewed from an Android App running Air and using the Stagewebview.
    We noticed that despite the default browser set as Google Chrome (Webkit v.537), we identify that app using Webkit v.534.
    After a lot of trouble shooting, it seems that there is a difference between "native" browser and "default" browser.
    Is that correct?
    If so, the question is: Is there a way to make Stagewebview use the user selected browser/engine ?
    Our website needs to display text vertically (japanese text) and the form elements are not well recognized in the 534 version browser, but work perfectly in the last version of Chrome we can get running on those devices.
    (We target Android 4.2+ users)
    Any input will be appreciated.
    Cedric Simon

    Hello ArkadiuszOkoń,
    I downloaded the 4.4W sdk and replaced the file as proposed, but I don't notice any change.
    On Desktop, I can see that Air webkit 533 is used. did my compile really took the new file into configuration?
    I'm using FlashDevelop, are there settings to change in the bat fie or in the manifest?
    As you proposed about the <uses-sdk> settings, some are already setup and I didn' change them, should I higher the minSdkVersion for example?
    Here is the current section:
      <android>
        <manifestAdditions><![CDATA[<manifest android:installLocation="auto">
      <uses-sdk android:minSdkVersion="8" />
      <uses-permission android:name="android.permission.INTERNET" />
      <uses-feature android:required="true" android:name="android.hardware.touchscreen.multitouch" />
    </manifest>]]></manifestAdditions>
      </android>
    Also, Jan-F-W, thank you for your proposal,
    I should explain something else:
    The app is using "stagewebviewbridge" package that one can find here : stagewebviewbridge -  Extend Adobe AIR StageWebView ( Desktop, iOS, Android ) - Google Project Hosting
    We do not have access to the source code of that app, but we have to investigate the case and propose a solution otherwise the development company in charge will not make a single move.
    So I created a sample application that loads a page on my machine and that displays the userAgent to check what engine is running.
    (in that case, I can use a StageWebView directly if I want)
    I can see that depending on the useNative boolean parameter of StageWebView I get a different userAgent, which is great.
    BUT, I had a doubt on mobile, as stated by Adobe Documentation: This parameter is ignored on mobile.
    In doubt, I checked on the mobile device, and in both base, the device "native" browser is used, not the Chrome set as "default".
    Maybe my tests are not accurate enough? I'm not a flash developer, so I feel a bit lost there.
    Thank you for your guidance.

  • Cannot get MacPro to allow me to boot to an alternative boot disk. Can choose in control panel but will not use the disk to boot. Also won't boot using disk selected using option key

    My primary boot disk is encrypted as is a secondary boot disk (backup) but I cannot boot using any other disk. System 10.8.5, MacPro 4.1.
    All disks mount using primary boot disk. All disks check out as OK and I have repaired permissions.
    When I choose in the control panel the Mac boots but will always use my original boot disk.
    When I select the disk using the option key at startup, the boot process stalls with a grey screen and a spinning cursor.
    Thanks,
    Dave

    Still trying to figure this out. I erased the drive, did a format using disk util and then re-installed the system but I still cannot get the disk used as a startup drive. I also tried an external firewire drive and it won't allow me to boot from it either.
    I can choose it starting up with the option key but it just gives me a blue screen and the spinning cursor.
    If I select it in the startup pref pane it boots into my other startup drive only.
    DaveLon

  • Firefox loads but will not access the Internet, showing only a blank page with a single tab "Untitled," and "Done" in the progress indicator.

    When I load Firefox, I get a blank page. There is a single tab with "Untitled," and an indication "Done" at the bottom. The program does not respond to any of my bookmarks--it works but the end result is the blank page described above.

    A possible cause is security software (firewall) that blocks or restricts Firefox without informing you about that, possibly after detecting changes (update) to the Firefox program.<br />
    Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox.<br />
    See [[Server not found]] and [[Firewalls]] and http://kb.mozillazine.org/Firewalls<br />
    See also http://kb.mozillazine.org/Error_loading_websites
    Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    * Don't make any changes on the Safe mode start window.
    See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]

  • We have 20" screen firefox will not display the hole screen only 1/3 in the middle

    firefox only displays about 1/3 of the screen. it's all in the middle of the screen. we have to use internet explorer to be able use the whole screen

    You need to put Firefox in Full Screen Mode.
    To do this, click the Firefox button in the upper left corner. Then click the full screen button.
    To exit full screen, mvoe the mouse to the top of the screen, right-click on the tab strip, then click '''Exit Full Screen Mode'''.

  • Adobe will not update the Inspiration Browser, Download update does not work. What gives?

    Followed instructions for Inspiration update browser and it did not install. What gives?

      If you are using the welcome screen try updating directly from the Organizer but first open your web browser and make sure you are logged in to Photoshop.com on-line.
    Then launch Photoshop Elements Organizer
    On the menu bar click Help >> Elements Inspiration Browser
    Enter your ID and password
    In the installation dialog click Install
     

Maybe you are looking for