Adobe Flash Builder pureMVC_As3 2.0.4 login works in Flash Builder when developing and testing but does not when deployed.
I have Adobe Flash Builder 4.7 with air 15. I am using as3 PureMVC swc. The application works and logins to my server during development and testing. But the issue comes when I deploy the application in IOS 8. The login does not work. Can anyone help. Thanks in advance.
Just as an add on note. What we can't determine is when the SWF file is run either in a a flash player 9 or with IE
it does not work. (i.e. no email and variable that is sent back is undefined) In flash player 10, it warns about some
security settings.
but in FLASH CS4 authoring environment, using the test movie, ctrl+enter, it runs like a champ, sends the email, gets
the variable back.
The server its being run on is a LAN based IIS server for Intranet use. So the local PC is connecting to it fine in "Test movie" mode.
but if you run that swf any other way, its does not work for love nor money! How do you debug for that! The asp code was even cut down
to a simple HELLO WOLD example and that still did not work. Of course it did work in Test Movie mode!
Similar Messages
-
MacBook Pro is not starting up. It just stays on a white screen with a flashing folder icon. Have tried restarting while holding the Option key, and the cursor becomes visible and movable, but it does not go to the desktop.
Hello Sonya_Rose,
I found this article when researching the issue you describe here named A flashing question mark appears when you start your Mac found http://support.apple.com/kb/ts1440.
Check the mouse and keyboard
This issue might occur if a mouse or trackpad button is pressed during startup. Make sure the button isn't pressed.
If the issue persists, shut down your Mac with its power button, disconnect any external mouse and keyboard, then turn on your Mac with its power button. If the flashing question mark issue persists, reconnect the keyboard and mouse.
Additional steps
If your Mac still starts to a flashing question mark, follow the steps below. If any step resolves the issue, you don't need to continue to the next one.
Select your Mac OS X startup disk with Startup Manager by restarting and holding the Option key. After your Mac starts up, restart again to verify that the flashing question mark does not appear.
If the issue persists, insert your Mac OS X installation disc. Be sure to either use the disc that came with your Mac, or, if you installed a later Mac OS X version from disc, use the newer disc.
MacBook Air note: On a MacBook Air, there are two options for starting up from Mac OS X media: Either connect a MacBook Air SuperDrive to the MacBook Air via the USB port and restart the computer, holding down the C key during startup, or use Remote Install Mac OS X to startup from a system software DVD that's located on a partner computer. Once started up from Mac OS X media, skip to step 3.
Restart the computer, then hold the C key during startup.
From the Utilities menu, choose Disk Utility. Don't click Continue.
Select your Mac OS X disk (named "Macintosh HD" by default) in the left side of the Disk Utility window.
Click the First Aid tab.
Click Repair Disk to verify and repair any issues with your Mac OS X startup disk.
After repairing the disk, try to start up normally.
Important: If Disk Utility finds issues it cannot repair, you may need to back up as much of your data as possible (or use Time Machine to back up to a different disk), then erase the disk and reinstall Mac OS X. You should back up important files and data before erasing a drive. Erasing deletes everything on the hard disk (including things on your desktop). Also, you can install Mac OS X onto an external disk, start from the external disk, and use Migration Assistant to transfer items from your usual internal Mac OS X startup disk to the external disk, then erase the internal disk and reinstall Mac OS X.
If the issue persists, and Disk Utility didn't find any irreparable issues, quit Disk Utility, quit the Installer, select your disk when prompted, and restart.
If the issue continues, reset PRAM. Note: After resetting PRAM, if the computer starts up normally, reselect the startup disk in the Startup Disk preferences.
If none of these steps resolve the issue, start up from the Mac OS X Installation disc and reinstall Mac OS X.
Regards,
Sterling -
I've tried charging it overnight and it still will not turn on, when connected to the charger the apple sign just goes on and off but does not do anything, i've tried resetting it and this also does not work, but then once taken off the charger it doesn't even say the sign for charging it just does nothing
Turn your phone off and connect your cable to the computer, but not the device just yet. Start up iTunes. Now, hold down the home button on your phone and plug it in to the cable - don't let go of the button until iTunes tells you it's detected a phone in recovery mode. Now you can restore to factory settings.
-
Adobe flash player downloads but does not work
Hi,
When I download the flash player is says to click on active x and I do and allow and then it downloads and says complete but does not work when I try to watch you tube videos. It says download flash player which I have already done. Please help.cheri wrote:
I can see the description box at the top but there is another white box with an x in the corner in about the middle of the screen
You should see a flash animation if the Flash player was installed properly. That you aren't seeing it means that it hasn't been.
Adobe has a link to a troubleshooting page:
http://kb2.adobe.com/cps/191/tn_19166.html
Work through the suggestions. -
Adobe Audition does not playback any audio file. He opens it but does not react on the play key.
Adobe Audition CC does not playback any audio file. He opens it but does not react on the play key. It is after use audio hardware usb wi-fi headphone and return to build-it out. The program don't react now.
I see problem:
I am unable to get playback at all in CS6 on Mac. The play button or spacebar will not move the playhead or make sound come out of the foamy things with the magnets. The play button toggles back and forth between green and white, but it isn't working. This is true in both multi track and waveform view.
Anyone have ideas on what the issue could be? Thanks!
Some Info:
MacBook Pro 2.2 i7, 16GB RAM, 512GB SSD
Mac OS 10.8.3
Audition CS6 5.0.2 Build 5
and reply:
Best bet would be to go into Preferences > Audio Hardware, verify your input and output devices are correct, and probably switch your Master Clock to the opposite setting. If that fails, we can continue troubleshooting.
I have the same problem as the author writes. But these actions do not helpUnfortunately I believe that requires purchasing the new version, and I do
not have budget approval for such a purchase.
On Tue, Jan 27, 2015 at 11:34 AM, Charles VW <[email protected]> -
Flash Player 10 ActiveX, installed perfectly on FireFox but does not want to install on IE8
I tried to install Flash Player 10 ActiveX but no luck
operating system VISTA 32bit
web browser and version IE8 32bit
Flash Player version WIN 10,1,82,76
is there anything in the security needs to be adjusted?
It was running perfect before I do the latest upgrade
It is running perfect on Fire Fox
It is just not working on IE8
Flash Player 10 ActiveX, installed perfectly on FireFox but does not want to install on IE8Hi, You might want to review the Troubleshooting Guide as it has been updated and a lot of new information is now included. If you prefer you can use the Manual Installer for IE which you'll see there. A lot of the questions that I would ask are listed also.
http://kb2.adobe.com/cps/191/tn_19166.html
Hope this is helpful for you.
Thanks,
eidnolb -
My adobe captivate6 installs but does not run on my windows7 dell inspiron
my adobe captivate6 installs but does not run on my windows7 dell inspiron with 4gb ram and 500gb hdsk, i downloaded the trial first 32bit and it installed fine and didnt run. so i thought that a full version with a 64bit installation will do the trick, but after that the captivate 6 did not still work on my system. i also tried it on an acer with duo core and the captivate software installed and did not still work. it only shows the captivate flash screen.
a friend installed his on an acer laptop 64bit, i3processor, and it works fine. please i will be glad if i can be helped on how to correct this
thanksHave you tried right clicking on the Cp icon and selecting Run as Administrator? This is something you MUST do in Win7 but was not necessary on Xp.
-
Dear All,
I am requesting help to resolve problem on my iPhone 4S. The Apple Icon is just flashing on connection to charging source or to the computer and the phone does not come on. Need help as this phone is driving me crazy.Welcome to the Apple Community.
In order to change your Apple ID or password for your iCloud account on your iOS device, you need to delete the account from your iOS device first, then add it back using your updated details. (Settings > iCloud, scroll down and hit "Delete Account")
Providing you are simply updating your existing details and not changing to another account, when you delete your account, all the data that is synced with iCloud will also be deleted from the device (but not from iCloud), but will be synced back to your device when you login again.
In order to change your Apple ID or password for your iCloud account on your computer, you need to sign out of the account from your computer first, then sign back in using your updated details. (System Preferences > iCloud, click the sign out button)
In order to change your Apple ID or password for your iTunes account on your iOS device, you need to sign out from your iOS device first, then sign back in using your updated details. (Settings > store, scroll down and tap your ID)
If you are using iMessages or FaceTime, you will also need to log out and into your ID there too. -
When logging in into yahoo mail after typing in password Firefox is adding something, probably remembered password and login fails all the time. At yahoo mail Notepad does not work because it is impossible to close the list of items and they cover information, so I have to go to IE.
Only when i go to a different browser (like IE) after i clear it , then all that shows up is the pages i visited in IE , that is what bugs me , why is IE browsing history sowing up in Firefox ??
Basically , i can clear the history in Firefox , and then for a example , go to Craigslist , using IE7 (launching it from a complete different Icon , in other words at that time i never open Firefox) , then after closing out , or even leaving open as it does not seem to matter , i go into Firefox , and hit History , and there is every place i visited in IE7 , on my History in Firefox -
Thumbnail preview works in adobe reader 9 but does not work in adobe 8.0
I have small issue. Thumbnail works in adobe reader 9 but but does not work in adobe acrobat 8.0 in win xp
Anyone going to tell me how to do this uninstalling and installing??????????
I don't want to mess things up even more! Geez--I'm almost 60 years old,
need to work and this might be costing me a job. I'm not 20 and text and
e-mail etc every day. I'm just asking for a little help that as I see it ,
is due to a "glitch" with Adobe's software. They can easily in their
technological minds put a warning on anything before someone downloads
anything such as "If you download this and you have already downloaded
that,, then it won't work." How tough would that be??? They, like most other
major corporations, are in it for the money. What has happened to customer
service???
I need a step by step with my hand held and so it won't screw up things even
MORE. Adobe...get your customer service and your software together...This is
draining. I may lose a job over it. I need to have my computer running well
at this point in time as there is no extra time to spend dealing with
software issue that are a result of Adobe's software incompatibility.
I was on the phone for TWO hours last night telling people exactly what was
going on. I even read the error message word for word. No one would help me
unless I coughed up the money that I don't have...and in addition I will
lose a job that might get me some money. This is why I am so upset. Why is
dealing with Adobe always so difficult??? Of course, I am upset. I'm
actually a lovely person. It is just that this stuff rattles my nerves.
Especially when there is a jobwith a raiseinvolved that I may lose as a
result.
Now I had better get dressed and ready for the job I have now before I am
late for work and lose that job, too..... -
I recently purchased a Canon 7D. I own Adobe Photoshop/Bridge CS5. I cannot open my raw images in Bridge. I have tried to download the plug in but does not seem to work. Please Help, I need to be able to open my raw images in Bridge ASAP. I do not want to upgrade to CS6 at this time.
If you had given us sensible information, I could look it up for you if your efforts fail.
Right now, I don't even know if you are on a Mac or on a Windows box.
BOILERPLATE TEXT:
If you give complete and detailed information about your setup and the issue at hand, such as your platform (Mac or Win), exact versions of your OS, of Photoshop and of Bridge, machine specs, what troubleshooting steps you have taken so far, what error message(s) you receive, if having issues opening raw files also the exact camera make and model that generated them, etc., someone may be able to help you.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks! -
I can not get my Adobe Photoshop Elements 8 organize to open. The edit option comes up with no problem, but will crash when I try to access organize. What should I do to fix this problem?
Hi,
Which operating system are you running on?
Try starting the organizer while holding down the shift key. Hopefully, it should load the Catalog Manager.
Select your current catalog and click on the Repair button. Once it has finished, click on the Open button to see if the catalog opens.
Good luck,
Brian -
My flash reads the xml, but does not understand the tag php....
my flash reads the xml, but does not understand the tag php. I want to read my xml dynamically, please help me.
code:
stop();
function randomOrder(targetArray)
var _loc2 = targetArray.length;
var _loc3 = [];
for (var _loc1 = 0; _loc1 < _loc2; ++_loc1)
_loc3[_loc1] = _loc1;
} // end of for
var _loc4 = [];
for (var _loc1 = 0; _loc1 < _loc2; ++_loc1)
_loc4[_loc1] = _loc3.splice(Math.floor(Math.random() * _loc3.length), 1);
} // end of for
var _loc5 = [];
for (var _loc1 = 0; _loc1 < _loc2; ++_loc1)
_loc5[_loc1] = targetArray[_loc4[_loc1]];
} // end of for
return (_loc5);
} // End of the function
var randomNUM = "?n=" + random(9999);
_root.lan = 1;
var homehead;
var homelink;
var homelinkwindow;
var homebg;
var homeflash;
var lamp = Array();
var promo = Array();
var promobottom = Array();
var headimg = Array();
f_xmlwork2 = new XML();
f_xmlwork2.ignoreWhite=true;
f_xmlwork2.load("banner.php");
f_xmlwork2.onLoad = function(sucess){
if (sucess){
trace ("XML loaded!");
f_xmlItemx2 = parseInt(this.firstChild.childNodes[0].firstChild);
f_totalx2 = f_xmlItemx2.length;
trace(f_totalx2);
var _loc12 =0;
// declarar a imagem de fundo
homebg = this.firstChild.childNodes[0].firstChild.nodeValue;
f_headimg = this.childNodes[1];
for (var _loc2 = 0; _loc2 < f_headimg.childNodes.length; ++_loc2) {
juju = f_headimg.childNodes[_loc2];
jj = headimg.push({headimg: f_headimg.childNodes[_loc2].attributes.headimg, bgimg: f_headimg.childNodes[_loc2].attributes.bgimg, msgimg: f_headimg.childNodes[_loc2].attributes.msgimg, leftthrow: f_headimg.childNodes[_loc2].attributes.leftthrow, rightthrow: f_headimg.childNodes[_loc2].attributes.rightthrow});
//end for
allpromo = this.childNodes[2];
jjpromo = allpromo.childNodes;
for (var _loc2 = 0; _loc2 < allpromo.childNodes.length; ++_loc2)
trace (jjpromo[_loc2].attributes.title);
jj = promo.push({img: jjpromo[_loc2].attributes.img, title: jjpromo[_loc2].attributes.title, url: jjpromo[_loc2].attributes.url, window: jjpromo[_loc2].attributes.window, info: jjpromo[_loc2].childNodes[0].nodeValue});
// end of for
allpromobottom = this.childNodes[3];
jjpromobottom = allpromobottom.childNodes;
for (var _loc2 = 0; _loc2 < allpromobottom.childNodes.length; ++_loc2)
trace (jjpromo[_loc2].attributes.title);
jj = promobottom.push({url: jjpromobottom[_loc2].attributes.url, window: jjpromobottom[_loc2].attributes.window, info: jjpromobottom[_loc2].childNodes[0].nodeValue});
} // end of for
if (f_xmlwork2.loaded == true)
headimg = randomOrder(headimg);
for (var _loc2 = 0; _loc2 < f_headimg.childNodes.length; ++_loc2)
trace (headimg[_loc2].headimg);
} // end of for
play ();
} // end if
trace(f_xmlwork2);
stop();
PHP code:
<?
$link= mysql_connect("localhost","rnpac_eco","123");
mysql_select_db("rnpac");
$dir="banner/";
$dir1="produtos/img_pro/";
$dir2="universo/actividades/";
$sql = 'SELECT tbl_produto.id_produto, tbl_produto.produto, tbl_produto.legenda, tbl_produto.detalhe, tbl_produto.preco, tbl_produto.produto_cat_id, tbl_detalhe_produto.proprietario, tbl_detalhe_produto.local, tbl_detalhe_produto.qualidade, tbl_detalhe_produto.alcool, tbl_detalhe_produto.acidez, tbl_detalhe_produto.ph, tbl_detalhe_produto.informacao, tbl_detalhe_produto.gestor, tbl_detalhe_produto.condicionamento, tbl_detalhe_produto.detalhe_t, tbl_detalhe_produto.interesse, tbl_detalhe_produto.transporte, tbl_detalhe_produto.produto_id, tbl_imagem_produto.id_imagem, tbl_imagem_produto.imagem1, tbl_imagem_produto.imagem2, tbl_imagem_produto.imagem3, tbl_imagem_produto.imagem4, tbl_imagem_produto.imagem5, tbl_imagem_produto.imagem6
FROM tbl_cat_produto, tbl_produto, tbl_detalhe_produto, tbl_imagem_produto WHERE tbl_produto.id_produto = tbl_detalhe_produto.produto_id AND tbl_produto.id_produto = tbl_imagem_produto.produto_id ORDER BY RAND()';
$resultado = mysql_query($sql)
or die ("Não foi possível realizar a consulta.");
$row1=mysql_fetch_array($resultado);
$sql = "SELECT tbl_sub_universo.id_subuniverso, tbl_sub_universo.subuniverso, tbl_sub_universo.universo_id, tbl_actividade.id_actividade, tbl_actividade.entidade, tbl_actividade.legenda, tbl_actividade.subuniverso_id, tbl_actividade.det, tbl_actividade.preco, tbl_actividade.data, tbl_detalhe_actividade.actividade_id, tbl_detalhe_actividade.periodo, tbl_detalhe_actividade.descricao, tbl_detalhe_actividade.programa, tbl_detalhe_actividade.informacoes, tbl_detalhe_actividade.actividades, tbl_detalhe_actividade.localizacao, tbl_detalhe_actividade.locais, tbl_detalhe_actividade.servicos, tbl_imagem_produto.id_imagem, tbl_imagem_produto.imagem1,tbl_imagem_produto.imagem2, tbl_imagem_produto.imagem3, tbl_imagem_produto.imagem4, tbl_imagem_produto.imagem5, tbl_imagem_produto.imagem6, tbl_imagem_produto.actividade_id FROM tbl_sub_universo, tbl_actividade, tbl_detalhe_actividade, tbl_imagem_produto WHERE tbl_actividade.id_actividade =tbl_imagem_produto.actividade_id AND tbl_actividade.id_actividade =tbl_detalhe_actividade.actividade_id ORDER BY RAND()";
$resultado = mysql_query($sql)
or die ("Não foi possível realizar a consulta.");
$row2=mysql_fetch_array($resultado);
$query='SELECT * FROM tbl_banner ORDER BY RAND()';
$resultado = mysql_query($query);
echo' <?xml version=\"1.0\"?>
<home_left_headline>
<bgimg>'.$dir2.''.$row1['imagem1'].'</bgimg>
</home_left_headline>
<home_flash>';
while($row = mysql_fetch_array($resultado)) {
echo'<swf headimg="" bgimg="" msgimg="" leftthrow="" rightthrow=""></swf>';
echo'</home_flash>';
echo'<promotop>
<promo img="" title="" url="" ><![CDATA[]]></promo>
<promo img="" title="" url="" ><![CDATA[]]></promo>
</promotop>';
mysql_close($link);i have two files banner.php, for testing my flash banner.
This one works:
-------------------------------| banner.php |---------------------------------------------
<?xml version="1.0"?>
<content>
<settings>
<menu X='160'/>
</settings>
<nav>
<main Name='HOME' Link='home.swf'/>
<main Name='EMPRESA' Link='home.swf' >
<sub Name='HISTORIA' Link='content.swf' toLoad='content/contentrosa.xml'/>
<sub Name='OBJECTIVO' Link='content.swf' toLoad='content/contentrosa2.xml'/>
</main></nav>
</content>
-------------------------------|end banner.php |---------------------------------------------
this other does not work:
-------------------------------| banner.php |---------------------------------------------
<?php
echo"<?xml version="1.0"?>
<content>
<settings>
<menu X='160'/>
</settings>
<nav>
<main Name='HOME' Link='home.swf'/>
<main Name='EMPRESA' Link='home.swf' >
<sub Name='HISTORIA' Link='content.swf' toLoad='content/contentrosa.xml'/>
<sub Name='OBJECTIVO' Link='content.swf' toLoad='content/contentrosa2.xml'/>
</main></nav>
</content>";
?>
-------------------------------|end banner.php |---------------------------------------------
Why? What is wrong? why does my flash does not understand the tag php
Message was edited by: armandix -
A problem has just started with my IPAD Air after 3 months of use.
If I try to open Safari by tapping on the icon the screen briefly flashes white but does not display the page.
Similarly if I try to open Settings page, Mail page, Calendar or Clock the screen just briefly flashes but the Apps do not run.
Some of the Apps do work on tapping the icon e.g. Maps, iBooks, Appstore, iTunes, Newstand etc.
I do have some website links which display when the icon is tapped e.g. John Lewis but some links do not work.
I have ensured that the ipad is fully charged, powered it off an on again, and cleaned the screen with a lint free cloth but the
same problem keeps occurring.I saume you used a second display at one time, otherwise the Display settings wouldn't be treating your primary display as a secondary.
IF you open your System Preferences>Displays (-System Preferences) and click "Gather Windows" it should pull everything to the display on which you clicked it. -
Hi. I'm a Mac user. After entering the redemption code from Adobe Photoshop CC, I keep getting an error saying "This card was purchased in a country that does not match your Adobe ID. You can try signing in with a different Adobe ID or get in touch with us if you need help." What should I do?
Did you purchase the software in another country than where you live?
Maybe you are looking for
-
Can no longer connect to my network - AirPort Extreme
Hi everyone. I have a small network in my home office and as of lately cannot connect on the wireless side for some reason. My setup: I have a linksys wrt54g router connected to my modem. I have an Intel MacMini connected to the router via ethernet.
-
I have $0.15 left in my account and I want to change to south african store but it says I must finish my balance before I change...help please.
-
Trigger Event in Process Chain
Hi ppl, i want to push the data into ODS and intocubes whenever the data has been placed in the Delta Queue. how can i do that? i heard that i need a abap program to trigger the event in process chain, is anyone here can help me with the abap program
-
Adding Proprietary Message on Report Output
Hi We are on Oracle Application R12.1.2. We have a requirement to add "Proprietary Message" on some of the report with sensitive data. Is there any way to do that without customizing the reports. Thanks in advance
-
Where can I buy White iPhone 4 in Singapore?
I need to buy White iPhone 4 Factory Unlocked in Singapore. Where can I get that?