Advance to Next Stage with "Enter" keystroke

I have a project in Flash CS3 that has numerous Stages. At
the end of each Stage, I have the stop(); actionscript. I need to
also implement an advance to nextStage actionscript by just hitting
the "Enter" button on the keyboard. Can this be done, and if so
how? Thanks in advance.

Just a quick recall:
The sentence was
If I enter the SU in the confirmation stage all works fine. Instead if I enter SU in TO creation stage, system moves SU total quantity (instead of just required quantiy as in the MM movement that triggered TO) in the final storage type and no remaining quantity in the pick point storage type.
Any clue to enter storage unit in the TO creation stage?
Thanks in advance

Similar Messages

HT1655 I have a 3rd generation shuffle. It has stopped working with the earphones it came w/pinch buttons on the cord. It will no longer advance to next song/change the volume. Even with a new set of Apple earbuds, it does same thing. How do i factory

I have a 3rd generation shuffle. It has stopped working with the earphones it came w/pinch buttons on the cord. It will no longer advance to next song/change the volume. Even with a new set of Apple earbuds, it does same thing. How do i factory reset or fix the problem?

Hello there, RufusChloe.
The following iPod Troubleshooting Assistant should help with troubleshooting your issue:
Apple - Support - iPod - iPod shuffle (3rd generation) Troubleshooting
http://www.apple.com/support/ipod/five_rs/shuffle3gen/
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

HT4400 how do you advance to the next page with focus 40 blue

how do you advance to the next page with focus 40 blue

Hello,
To place your own images for previous and next button you need to use the fill feature. Please check the steps below:
1. Go SlideShow options and Uncheck Edit Together.
2. Select the next button and click on Fill to open Fill panel.
3. Click On Add Image and select the image you want to use. Also select the fitting type as "Scale to Fill" or "scale to Fit "and Position as "Center".
4. Do the same for previous button.
Regards
Vivek

Since updating my phone 4s with 6.1.1 I tunes still sees my phone as a new phone despite having successfully restored it with my old stored data; means I cannot progress to the next stage i.e. I cannot synch to my Mac

Since updating my phone 4s with 6.1.1 I tunes still sees my phone as a new phone despite having successfully restored it with my old stored data; ( I have done this twice) -means I cannot progress to the next stage i.e. I cannot synch to my Mac. My phone memory of 13GB was almost full before I updated and I get an error message when I try to restore with my original back up that there is insufficient memory for t his;it does restore ok with other back ups it offers which leave 1.5GB free on the phone but then I get the problem as above-I Tunes cannot get out of seeing my phone as a new phone and wanting me to restore again ie a loop and I cannot progress to the synch page
Any help/advice gratefully received!

You need to transfer Old iTunes library from Windows to new iMac
Migration from Windows to Mac

Clear stage and execute next action with btn?

Hey,
If you know, can you pls tell where to find out how to clear the stage of everything I have loaded it with. This would be done upon click of one of the buttons I have on the stage. That button also needs to execute a different class I have programmed. You can even just tell me what to search under to find out this data.
Explanation: I have 2 different classes. Buttons class and Videos class. Buttons class loads the stage with 9 different buttons. Each button is supposed to lead to its own video. (I have the buttons ready with programming to load the video and all of the programming works).
The Video class loads the video onto the stage and has the controls for it to play, pause, stop etc (works pretty much..).
Now, I am not sure what code to put under each of the buttons to clear the stage and load the Video class. If you need me to explain more/differently pls let me know.
Thanks for any help!!!

You can clear a container with numChildren and removeChild - something like:
while(myContainer.numChildren){
myContainer.removeChildAt(0);
If you're just doing addChild(someChild) then you are loading to the MainTimeline object, and you can just omit the myContainer part.
HTH

Need Help for a simple Keypress to advance to next frame

Hi all,
I am pretty weak at Action script. I need to create a simple presentation that displays a bunch of photos. I want to be able to hit the space bar to advance to next picture. I am able to stop the playhead at the picture, but i want to advance to next labelled frame by hitting the space bar. Some help would be great.
Thanks
Anthony

Thanks for the quick response, I have a 4 pictures on 4 seperate layers. The starting keyframe for each picture is labeled "Slide 01"," Slide 02" etc. When i test movie, it automatically plays the first picture labeled "Slide 01". At the end that slides frames I have a stop action. When I hit the space bar, i want the playhead to jump to the next slide which it's start keyframe is labeled "Slide 02". It has a few frames to allow for fadeing in, and then a stop action on the last keyframe. And so on.
I entered your code and placed the goto and play event handler to jump to the next slide's keyframe which i labeled "Slide 02". I did get the following error:
Location: Scene 1, layer 'Scripts', Frame 1, Line 3
Description: 1046: Type was not found or was not compile-time constant: KeyBoardEvnt.
Source: function next(event:keyboardEvent):void
stage.addEventListener(KeyboardEvent.KEY_UP,next);
function next(event:KeyBoardEvent):void
if(event.keyCode==Keyboard.SPACE){
gotoAndPlay("Slide 02");
Thanks
Anthony

ENTER keystroke on text input entry not always submitting

I have run into a problem where once a user has completed the
text input entry and has clicked the ENTER button to "submit" this
entry, the ENTER keystroke event is not always "submitting" the
input entry. Sometimes it requires hitting the ENTER key two or
three times before the slide moves on.
We are loading the captivate files into a custom flash
interface (but there are no key events in this interface that could
conflict with the captivate's ENTER keystroke) and I have the
maximum number of attempts set to 1.
I did some debugging from the custom flash interface, and in
the captivate .swf, the proper input field has focus and the ENTER
keystroke is being captured
Has anyone else experienced this problem? Does anyone know a
possible solution?

I’ll try to explain the problem more clearly.
I want the name that is loaded from the textfile into the combobox to be selected from the list.
Once an item is selected everything works just fine. But I don't want the user to select the item, when the name is loaded into the combobox. The user will expect that the item will be selected automatically. Is that possible?
The function I want is the opposite of combobox.selectedItem. Instead of having a selected item and getting the name, I have a name and I want to select the item.
The name is a correct name, because the name is saved from the combobox.

Resizing and positioning a stage with a background image

Hey guys,
I'm trying to get some specific behaviour on a stage as I think it'll work out best for the application I am doing. The module I am working on right now consists of a stage with an imageview bound to the width and height and an image inside. I'm eventually looking to setup some animations and such which will overlay on the image but I want the window to be resizable in various ways.
Right now, when the stage is created I manually set the width and height so the image fits perfectly in the stage. For resizing, I want the user to be able to drag either the height or width or diagonal sliders but have the original aspect ratio of the stage retained. I have the preserveRatio variable set to true in the ImageView which makes the image not become distorted, but the stage can be extended horizontally/vertically/diagonally to any ratio which I'd rather not have. In terms of fullscreening, I'd like to allow it and have the image centred.
I've tried to see if the LayoutInfo class can help me out, but it doesn't seem to have any implementations which are too useful for what I am trying to do. So does anyone know how I can accomplish the above? I'm very new to JavaFX so if anyone can make any other suggestions in terms of the objects I am using and what's best practices for what I am trying to do, it would be much appreciated. I've looked into using PathAnimation and PathTransition for the animations I am using and while they'd do most of the job well, I need to be able to place objects, modify speeds, locations etc. so I'll probably just end up making some custom drawing methods.
Thanks in advance,

Similar request in [JavaFX rezising-scaling scene & elements|http://forums.sun.com/thread.jspa?threadID=5437642]...
Mmm, I made various experiments. The difficulty is to watch both dimensions, because when one change, the other must be changed as well, but the watch is then triggered, making a cascade of changes... I solved it (partly) with a boolean disabling the secondary change.
def image = Image
    url: "file:///D:/images/forest_0003_1024.jpg";
    preserveRatio: true
def startSize = image.width / 3;
var bResizingWidth: Boolean;
var bResizingHeight: Boolean;
var stw = bind scene.width on replace
println("Width -> {stw}");
    ResizeStage(true);
var sth = bind scene.height on replace
println("Height -> {sth}");
    ResizeStage(false);
var scene: Scene;
var iv: ImageView;
def stage = Stage
    title: "Proportional Stage"
    scene: scene = Scene
        content: iv = ImageView
            image: image
            preserveRatio: true
            fitWidth: startSize
def frames: java.awt.Frame[] = java.awt.Frame.getFrames();
//~ println(frames[0]);
def insets = frames[0].getInsets();
//~ println("T={insets.top} L={insets.left} B={insets.bottom} R={insets.right} ");
def insetX = insets.left + insets.right;
def insetY = insets.top + insets.bottom;
function ResizeStage(bIsWidth: Boolean): Void
    if (stage.width == 0) return; // Init, nothing to do
    if (bResizingHeight and bIsWidth) // One dim is changed, don't react on setting of other dim
        bResizingHeight = false;
        return; // Just ignore secondary change
    if (bResizingWidth and not bIsWidth) // Idem
        bResizingWidth = false;
        return; // Just ignore secondary change
    if (bIsWidth)
        bResizingWidth = true;
    else
        bResizingHeight = true;
    println("Stage: {stage.width} x {stage.height}");
    def ratio = image.width / image.height;
    if (bIsWidth)
        stage.height = scene.width / ratio + insetY;
        println("H {scene.width} -> {stage.height}");
    else
        stage.width = scene.height * ratio + insetX;
        println("W {scene.height} -> {stage.width}");
    iv.fitWidth = scene.width;
}There are still some glitches, but it roughly works...
[EDIT] Changed to avoid resizing the dimension that the user is changing. Result is more logical but slightly worse... (?)
Edited by: PhiLho on 29 mai 2010 13:24

Navigate previous record,next record by entering key-up and key-down

Hi ,
JDeveloper11g_
I am trying to solve of how to navigate previous record,next record by entering key-up and key-down in ADF Table.
If any of you have this solution by JScript of Backing Bean please help me.
Thanks
zakir
===

Hi zakir,
I hope I understood your requirements correctly. You have an editable ADF table. You would like to use the up/down arrow keys to move from one row to the next/prev row of the same column. Since the Tab key moves the cursor to the right and Shift+Tab moves it to the left, now you want to implement the same thing but just up and down, correct? If so, try this.
/** Javascript **/
function detectKey(evt) {
    var inputText = evt.getSource();
    var id = inputText.getClientId();
    var start2 = id.indexOf(":") + 1;
    var end2 = id.lastIndexOf(":");
    var numValue = parseInt(id.substring(start2, end2));
    var evt2 = evt.getNativeEvent();
    arrows=((evt2.which)||(evt2.keyCode));
    switch(arrows) {
        // Up arrow
        case 38:
        numValue = numValue - 1;
        break;
        // Down arrow
        case 40:
        numValue = numValue + 1;
        break;
    var newStr = id.replace(/:\d:/, ':' + numValue + ':');
    var comp = AdfPage.PAGE.findComponent(newStr);
    if (comp != undefined) {
        comp.focus();
/** Jspx. (Place a client listener on each inputText in the ADF table) **/
<af:column .....>
<af:inputText value="#{row.bindings.price.inputValue}" .....>
    <af:clientListener type="keyDown" method="detectKey"/>
</af:inputText>
</af:column>With this, you get to move Up/Right/Down/Left in the editable ADF table without using the mouse.
References:
http://thepeninsulasedge.com/blog/?cat=29
af:clientListener attributes and methodes of event object in java script
Regards,
Chan Kelwin

How to resolve this IOS 8.3 update/restore error : RamrodErrorDomain error 1004 - update_baseband: failed to perform next stage

Yesterday, I encountered failed update from IOS 8.2 to IOS 8.3 on my ipad mini (model:A1455). Have tried several attempts but still getting below error on the time update/recover was almost done, thus, stucking my device on recovery mode
[18:12:45.0849] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 0
[18:12:45.0864] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 0
[18:12:45.0864] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 0
[18:12:45.0895] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 0
[18:12:45.0911] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 0
[18:12:45.0911] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 0
[18:12:45.0958] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 0
[18:12:45.0958] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 0
[18:12:45.0973] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 0
[18:12:46.0036] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 0
[18:12:46.0083] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 2
[18:12:46.0192] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 2
[18:12:46.0270] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 3
[18:12:46.0348] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 5
[18:12:46.0426] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 6
[18:12:46.0504] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 8
[18:12:46.0535] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 9
[18:12:46.0629] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 10
[18:12:46.0707] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 11
[18:12:46.0785] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 13
[18:12:46.0878] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 14
[18:12:46.0956] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 16
[18:12:47.0050] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 17
[18:12:47.0128] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 19
[18:12:47.0206] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 20
[18:12:47.0221] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 22
[18:12:47.0315] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 22
[18:12:47.0393] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 23
[18:12:47.0471] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 25
[18:12:47.0549] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 26
[18:12:47.0643] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 28
[18:12:47.0721] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 29
[18:12:47.0814] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 31
[18:12:47.0892] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 32
[18:12:47.0955] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 33
[18:12:48.0033] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 35
[18:12:48.0126] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 36
[18:12:48.0204] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 38
[18:12:48.0282] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 39
[18:12:48.0360] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 41
[18:12:48.0438] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 42
[18:12:48.0516] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 44
[18:12:48.0579] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 45
[18:12:48.0594] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 47
[18:12:48.0672] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 47
[18:12:48.0688] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 48
[18:12:48.0688] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 48
[18:12:48.0703] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 48
[18:12:48.0781] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 48
[18:12:48.0797] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 48
[18:12:48.0797] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 48
[18:12:48.0813] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 48
[18:12:48.0906] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 48
[18:12:48.0984] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 58
[18:12:49.0015] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 67
[18:12:49.0078] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 68
[18:12:49.0140] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 75
[18:12:49.0156] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 81
[18:12:49.0234] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 81
[18:12:49.0281] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 90
[18:12:49.0296] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 96
[18:12:49.0296] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 96
[18:12:49.0296] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 96
[18:12:49.0312] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 96
[18:12:49.0327] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 96
[18:12:49.0421] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 96
[18:12:49.0483] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 96
[18:12:49.0515] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 96
[18:12:49.0530] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 96
[18:12:49.0546] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 96
[18:12:49.0546] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 96
[18:12:49.0561] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 96
[18:12:49.0577] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 96
[18:12:49.0593] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 96
[18:12:49.0608] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 96
[18:12:49.0639] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 96
[18:12:49.0655] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 96
[18:12:49.0671] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 96
[18:12:49.0686] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 96
[18:12:49.0702] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 96
[18:12:49.0717] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 96
[18:12:49.0733] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 96
[18:12:49.0749] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 97
[18:12:49.0764] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 97
[18:12:49.0780] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 97
[18:12:49.0795] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 97
[18:12:49.0827] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 97
[18:12:49.0827] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 97
[18:12:49.0842] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 97
[18:12:49.0858] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 97
[18:12:49.0951] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 97
[18:12:49.0983] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 98
[18:12:50.0014] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 99
[18:12:50.0014] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 99
[18:12:50.0014] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 99
[18:12:50.0029] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 99
[18:12:50.0045] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 100
[18:13:07.0439] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 100
[18:13:07.0642] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 100
[18:13:07.0845] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 100
[18:13:08.0219] <Restore Device <<<<<IMEI>>>>>>0>: operation 19 progress 100
[18:13:08.0297] amai: AMAuthInstallBasebandHandleUpdaterStatus: commandAccepted: NO
[18:13:08.0359] device returned CFError with code -1
[18:13:08.0359] dumping CFError returned by restored:
[18:13:08.0375] CFError domainXXXXXXXXXXXXXXXXXXXin code:-1 description:failed to update device firmware
[18:13:08.0375] CFError domainXXXXXXXXXXXXXXXXXXXin code:-1 description:ramrod firmware update failed
[18:13:08.0375] CFError domainXXXXXXXXXrorDomain code:1004 description:update_baseband: failed to perform next stage
[18:13:08.0391] CFError domainXXXXXXXXXr code:48 description:Modem returned to download mode
[18:13:08.0391] Sending acknowledgement that final status was received
[18:13:11.0011] Restore completed, status:-1
[18:13:11.0011] Failure Description:
[18:13:11.0011] Depth:0 Error:AMRestorePerformRestoreModeRestoreWithError failed with error: -1
[18:13:11.0011]    Depth:1 Error:The operation couldnâ€™t be completed. (AMRestoreErrorDomain error -1 - Failed to handle message type StatusMsg)
[18:13:11.0011]       Depth:2 Error:The operation couldnâ€™t be completed. (AMRestoreErrorDomain error -1 - failed to update device firmware)
[18:13:11.0011]          Depth:3 Error:The operation couldnâ€™t be completed. (AMRestoreErrorDomain error -1 - ramrod firmware update failed)
[18:13:11.0011]             Depth:4 Error:The operation couldnâ€™t be completed. (RamrodErrorDomain error 1004 - update_baseband: failed to perform next stage)
[18:13:11.0011]                Depth:5 Error:The operation couldnâ€™t be completed. (BBUpdater error 48 - Modem returned to download mode)

If it has NEVER been jailbroke, here are some standard repair procedures:
First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow the on-screen directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore (or it doesn't help), go into Recovery Mode per the instructions here. You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again. Also, read this.

Next stage of the clean up has started.

sarah31 wrote:alot of posts have been placed in the wrong areas lately....
That's true.... old topics are now moved and the next stage of clean up will begin.
For everyone's information, all old topics obviously wrongly placed have been moved. Some of them were also removed with the help of the users. Thank you.
The remaining old topics will be moved whenever they appear. With the newly posted topics, to avoid confusion especially among the new users, wrongly posted topics will be tagged with [MVE] and moved later when the issue is resolved or no longer active.... appx. after one week.

and i assume you have removed some post lately as my post total dropped by about thirty or forty yesterday? (thats one thing post counts are good for to see if you mods are doing yer jobs )

CUP 5.3 SP9 Forwarded requests not moving to next stage

CUP 5.3 sp9 - The administrator forwarded a request (first stage mgr approval) to another person (the forward return box was checked). The person that the request was forwarded to got the message (no content in the email, just a link) and was able to approve. The original person also got an email with a link, and was able to see that the request was approved.
The request is stuck in the mgr approval stage, it did not move out of the original person's inbox. the audit trail is below:
1. Request 46 submitted by WZ8Y84 on 4/30/2010 <time>
2. Forwarded by Administrator on 04/30/2010 <time> on behalf of FZ62V1 to forward approver RZW8G8 with return
3. Request approved by RZW8G8 on behalf of FZ62V1 on 04/30/2010 <time>
When you look at the request, it is still in the original approver stage, was not moved to the next stage. Any ideas on why it works this way?

Jack,
The audit log clearly explains why.
2. Forwarded by Administrator on 04/30/2010 <time> on behalf of FZ62V1 to forward approver RZW8G8 with return
When you forward a request, you need to choose 'Forward with Return' and 'Forward with No Return'. In this case, the approver selected 'Forward with Return' so the request will get approved but will come back to the original approver who forwarded the request.
Regards,
Alpesh

Find and replace for multiple thin space with enter...

Hi,
Im new to the InDesign Scripting. I need to replace multiple thin space with enter to single enter. Dont know how to do. Pls someone help me.
Thanks in advance,
Sudha

Hi Sudha,
Use the Sample code,
app.findTextPreferences = null;
app.changeTextPreferences = null;
app.findChangeTextOptions.wholeWord = false;
app.findChangeTextOptions.caseSensitive = true;
app.findChangeTextOptions.includeMasterPages = false;
app.findTextPreferences.findWhat = "<2009>^p";
app.documents.item(0).findText();
app.changeTextPreferences.changeTo = "^p";
app.documents.item(0).changeText();
app.findTextPreferences = null;
app.changeTextPreferences = null;
Regards,
Nagaraj

Data moves to the next field with 'tab' or 'click' on writable pdf.

Anyone experience data moving to the next field with tab or click on writable pdf?

Thanks Frank. I might do that.
But I managed to find a temporary solution..yay!!!! :)
I added in the clientListener for the inputListOfValues' valueChange event
<af:clientListener method="launchPopUp" type="valueChange"/>
and in javascript I call the TAB action of AdfLovInternalEvent
<af:resource type="javascript">
function launchPopUp(evt) {
AdfLovInternalEvent.queue(evt.getSource(),AdfLovInternalEvent.ACTION_TAB,true);
</af:resource>
so it's forcing to perform the tab action when there is value change. doesn't matter tab or enter or mouse click on something else.
it seems to work for now..
I'll have to test it out a few more times to see if there is anything I missed.

How to clear the stage when entering a new frame

Dear all,
I am making my first website in flash based on frames. When you go to an other frame the Stage fades out. When you enter the frame you see nothing at all. So how can I clear the stage when entering the frame or even better it fades into the frame with clearing the objects & code of the previous frame.
Hope somebody can help me with this!
/*buttons naar frames*/ homehome.mouseChildren = false; homehome.buttonMode = true; homehome.addEventListener(MouseEvent.CLICK, actie5); homehome.addEventListener(MouseEvent.ROLL_OVER, actie5); homehome.addEventListener(MouseEvent.ROLL_OUT, actie5); var fadetimer:Timer; var st:MovieClip = new MovieClip(); function actie5(event:MouseEvent):void { //klikken if(event.type == "click"){ st.graphics.beginFill(0xFFFFFF); //Choose your color to fade. st.graphics.drawRect(0, 0, stage.stageWidth, stage.stageHeight); st.graphics.endFill(); st.alpha = 0; stage.addChild(st); fadetimer = new Timer(100); fadetimer.addEventListener(TimerEvent.TIMER, fadeStage); fadetimer.start(); } //roll over if(event.type == "rollOver"){ infohome.text = "je staat op de knop"; } //roll off if(event.type == "rollOut"){ infohome.text = ""; } } function fadeStage(te:TimerEvent):void { if (st.alpha < 1) { st.alpha += 0.05; } else { fadetimer.stop(); fadetimer.removeEventListener(TimerEvent.TIMER, fadeStage); gotoAndStop(7); } }
Thanks a lot for your time

sorry can't get the code working properly onwith the html code function. Sorry for that

Advance to Next Stage with "Enter" keystroke

Similar Messages

Maybe you are looking for