AFS : Add new size grid to the production order

Hi,
My companies requirement is, add new size grid for the partially confirmed production order. This production order is created without BOM and components are attached at the point of creation and based on the routings the component allocation also done.
Can anyone help me to solve the issue. Coz for the new size the component requirement is not changed accordingly. Even PP master data read also not possible coz order has been partially confirmed.

Hi VIshal,
In my case there is no master data. Operations and components are manintained in order creation. I have two requirements.
1. Change the order size & qty before the execution of order.
2. Add new size grid after some operations are confirmed in the order.
In the both cases, the component requirement is not changed accordingly.
But in 1st case if only qty change, component requirement is adjusted accordingly.
Edited by: Jayakody Arachchige Hansika Kamangi on Nov 3, 2009 1:24 PM
Edited by: Jayakody Arachchige Hansika Kamangi on Nov 3, 2009 1:25 PM

Similar Messages

To add new row to record the stability sample.

dear all
There is new requirement to add new row to record the stabilty sample in the inspection lot stock tabpage of QA11 usage decision. As we have configured sample usage row to record the sample which we take for testing purpose
and we use to reserves row to record the control samples of the batches which we sell in the domestic and export market.
I require the solution in this context.
thanks
with regards
Harish Ramachandran

Thanks for all your help. My problem was that I was using 2 lists to update the table. The problem solve!!!!
int modelIndex = listWhenScrollStop.size () - 1 - aRow;
if (modelIndex >= 0) {
return listWhenScrollStop.get (listWhenScrollStop.size () - 1 - aRow);

How to add new marketing attribute to the existing marketing attribute set?

Hi all,
I searched for existing forums but I didn't find the required one. I found some using Tcodes ,which is not my requirement. My requirement is to add new marketing attribute to the already existing marketing attribute set. This attribute set is created by my team lead with 4 attributes but now i have to add new attribute to this set so total will become 5 attributes for this attribute set. This has to be done through marketing professional business role. If this is not done through marketing attribute set, then I will go for the transaction where I can add marketing attribute for attribute set.
Please send the details of both marketing professional business role and transaction code.
Your help is highly appreciated.
Thanks,
Baasanthi.

Hi,
SAP CRM Marketing Attributes explained
Path to create Marketing attributes from webui: log in with Marketing Pro role->Marketing->Create->Marketing Attribute
Regards,Sumeet

Is it possible to add new screen fields to the transaction /dsd/sl_cockpit

HI experts,
Would like to know if it is possible to add new screen fields to the cloned version of /dsd/sl_cockpit.
I cloned the original transaction /dsd/sl_cockpit into a diff. name, now I want to know how I can include/ add those new fields to this transaction. It looks like the screen is dynamically built using Standard ABAP classes. Need help.
Thanks in advance

it is not possible to add new fields via badi on /dsd/sl_cockpit.

PP scenario to complete the production order without GR and No stock update

Hi Experts,
I have a very typical PP scenario here. Let me explain,
I want to create a production order (CO01) add operations to it and do the confirmation. As set, the cost will get updated against the production order. This is perfect.
Now the trick is, i actually DONT want to update the stock of the material. That is, the goods reciept should not happen. But at the same time, I need to have the count of how much is delivered in the production order.
I was thinking of having new movement type created (that would statiscally do the goods reciept without updating the actual stock of the material). Would this suffice, or do you guys have any other way of getting the count in the production order without having the goods reciept done.
Thanks for your early reply.
Beatle

Dear ,
If you want to avoid inventory issues as well as cost issue , i think you can bring the Confirmation -Yeild field as Delevered quianity in a Z-report .You can also utilise COOIS-Select Confirmation -Standrad Profile -Enter Order Type and Plant Code .Here you can select the change lay out option and bring the confirm yeild qty field from Hidden column to diplay colmn for all these orders .
You can use following tabel for your custom report or utlise coois for the same
1.AFRU -Confiramtion
2.GMNGA-Yeild Confirmed
3.LMNGA-Yeild to confirm .
Regards
JH

Confirmation of the production order qty equal to sales order qty

Hi Experts,
I need to control the confirmation of the production order should be equal to sales order qty.
I'm having the scenario as follows
If sale order qty for X material = 3
while running the MRP, system will plan the order qty as 8 because of we maintained rounding profile in the Material master and enhancement we used for this.
Rounding Profile Qty=5
Total Production Order Qty=8.
But, finally they will do the GRN for sales order qty only, remaining will be used for testing purpose.
So, the confirmation also has to happen for only sales order qty. There, we need to control the qty based on the sales order.
Is there any exit or Enhancement is available for this.
Please help me.
Naren

Hi,
Exit for confirmation check is CONFPP04.
However, opening orders for quantities higher than demand and leaving pieces undelivered and unconfirmed in production orders does not make sense. I could not get the requirement of incresing production quantity by adding rounding value? Moreover, if rounding is to be used for test purposes, why not do you receive them into stock? Why don't you receive 8 pieces into stock, deliver 3 pieces to sales order and transfer 5 pieces to related department?
If it is because of MRP and you really do not want to produce extra 5 piece immediately, you may use material reservation or any other form of demand for 5 pieces, use EX for lot size calculation and have MRP create two planned orders for sales order and testing requirement, then you can convert planned order for sales order requirement into production order and continue processing.
Regards.

Serial number error while creating the production order

Hello frds,
I am getting the following error while creating the production order.
"Item 000000 requires exactly 100 serial numbers for the asset".
If i give 100 serial numbers in the order, the error is solved. But i do not want to assign 100 serial numbers, i want to assign only 2 numbers.
I have tried using the new serial number profile also, but it is giving same error.
Kindly guide.
Regards,
Narendra Bora

Dear Narendra
Select the serial number profile and go to serialization procedure and set the ser. usage status 02 - Optional as below.
Procd Procedure description Ser.Usage
PPRL PP order release 02
since the serail number creation is optional for order relase this will allow you to relase with out error and with serail number assigned in partial.
Regards
Soundar

Error While saving the Production Order

Dear Experts
Pls let me know why am getting the below error while saving the production order after release..
PSFC_STD_LAYOUT does not exist
Message no. SSFCOMPOSER004

Dear,
Please check have you assigned the scheduling profile in work scheduling view of materail master?
Then go to OPKP check the same scheduling profile where you have activited the On realese execute printing remove this tick mark and then try with new order.
Or you can do the configuration in Tocde :OPK8 here assign the PSFC_STD_LAYOUT in forum.
Regards,
R.Brahmankar

Change of planning plant in the production Order

Dear Sapians
Please suggest me how we can change the planning plant in the production order once it is saved and confirmed before taking goods receipt.
Thanks
GVRR

Hi Prasanna,
1. Order is with material
2. This order is created independently
3. yes there are dependent requirements
Scenario is we have created Production orders with X plant. Later after confirmation and before GRN planning plant is changed as per the business decission. Now client wants to receive the goods in new planning plant.
I want to know, How can business area and functional area help us to receive the goods in changed planning plant scenario. can we maintain the plant values in this fields.
Regards
GVRR

Doubt about the settlement rule of the Production ORder

The only default distribution rule allowed for a PP order is PP1 or PP2. We would need to change that to allow settlement to multiple receivers as a default. If that is the case, we may want to look into a user exit to update the settlement rule during production order creation instead so that the G/L account is correct from the beginning.
Currently when we create the production order, the settlement rule will default the below, I am not sure if a user exit is able to maintain the Source as 200 (Materials)?
If yes, we can then add the second rule for Source 100 (Labor and Mfg) via the user exit as well.
In this case, SAP will not prompt us error of settlement with 200%, as they are from difference Sources.
now anybody can explain me about the User EXit we have to correct this

any help on this.. please its very urgent
thanks in advance

In inprocess inspection lets say the production order qty is 20. i would want only 1 no. to be inspected while inprocess inspection is configured. kindly guide. Regards,Mathew

In inprocess inspection lets say the production order qty is 20. i would want only 1 no. out of the 20 to be inspected while inprocess inspection is configured. kindly guide.
Thanks in Advance
Regards,
Mat

Hi Mathew,
Create sampling procedure with fixed sample and give sample size = 1. Assign this sampling procedure for the characteristics of the in-process materials in Routing/Master Recipe etc. For sample size calculation at-least one characteristic should be required characteristic for the Material.
Thanks&Regards,
kumar

Additional tabs in the production order

Dear Friends,
I want to have some additional tabs in the production order (one tab in the header and one tab in the item details). Some customer specific details I am not able to maintain in the production order... Hence I am planning for this one.
Please let me know...if anybody has done this. If so please give me some idea and let me know...how can we do it. Thanks in advance.
Regards,
Surya.

Hi,
You can create new tabs from SPRO-- Productionshop floor controlScreen controldefine user specific tab pagesdefine operation details screen.
There u can use the existing fiels available or use user defined fields.
For maintaining user defined fields, follow the path SPRO-- production -- basic data --routing -- operation data -- Define User defined fields.
Regards,
Santanu
Edited by: Santanu Paul on Jan 22, 2008 12:10 PM

Consumption during the processing time of the production order

Which adjustments must be made in the material master for the calculation of the lot size in the MRP run, that the consumption of the material during the processing time of the production order is considered for the calculation of the lot size.

Hi ,
You have to judiciously indicate the re order point in the material master( the re-order point is the sum of saftey stock and consumption during replenishment lead time).
How ever , this does not in any way influence the lot size , but only influence the no of lots i.e the procurement proposals. The lot size is determined by the lot sizing procedure selected by you , depending on various factors like agrrements with your vendor , optimum lot sizes to reduce the cost of procurment and storages etc.
You can refer to the following url for details on lot size :http://help.sap.com/saphelp_47x200/helpdata/en/fe/819b9f643b11d3b4e40004ac160649/frameset.htm
and for details about re order point :
http://help.sap.com/saphelp_47x200/helpdata/en/db/6f143ea7ec11d3a8330000e82a3c24/frameset.htm
Hope this information will be useful.
Regards
Raghuramam.

Assemble-to-order with spliting the Production Order

Hello,
I'm new to SAP and we just implemented the SAP System.
My Experince is from one year as Process Owner for PP in our Project.
I have a specific Question regarding the assemble to order process.
So far we did not implemet Capacity Planning in the System, but I would like to use it.
The Idea is the following:
1. There is a sales order coming for 1pc of Product. The scheduling is carried out, ATP-Check and so on. The production order is created and at least the capa is placed on the end of the chain (using quetimes). One Product needs 60min to assemble.
2. more orders are comeing in, all consuming 60min of capa on that day. If the capa is used, move to later date until capa is back again. this also should be now Problem to set as far as I understand what I have learned already
3. What i do not like... If I get orders with too many qty.... I would like to hav a maximum qty. where the order gets splited and moved forward to the next day... so... Customer orders 10, 5 are placed on Tuesday, 5 on wednesday and so on.
Each of those "Splits" should have one production order header.
Any idea how I can reach that?
Thanks, hope I will find a solution
BR Marian

Marian,
Standard ERP Sales order ATP cannot be made to confirm Sales orders based on capacity availability. All capacity related conflicts and resolutions are done during dispatching, which is a separate step.
If you need SO ATP to consider available capacity while confirming the Sales order, you could use functionality that exists in APO. Otherwise, in ERP, you are facing custom development.
Assemble to order in general is restrictive as to what types of scheduling can be permitted. There is no automatic production order splitting in standard SAP ATO. Some manual manipulation is permitted. Of course, with custom development, you are only limted by your imagination.
Best Regards,
DB49

Forth Closing the Production Order

Hi Experts
I am Using SAP 2007 B PL04.
I am having scenario in which client is making production order for a finished product for a quantity 10,000.Nos. he planned 10,000 nos. release the same in the mean time he issues 3000 nos for production.
Now the client gets the news that rest 7000nos is not required. so he forth close the production order.
now my question is if we do in the same scenario. the system is not showing the closed production order for 3000 nos which we issue earlier how to complete that 3000 nos.
early reply will be helpfull for me.
Ashish Gupte

Hi Ashish Gupte,
You have to wait until you receipt from production for the 3000 FG before you can close the order. If you can not wait, you may simply reduce the Production Order quantity to 3000 instead of closing it.
Thanks,
Gordon

AFS : Add new size grid to the production order

Similar Messages

Maybe you are looking for