After L&S and then CalcAll, values goes #Missing - Need help

Hi,
I am facing an issue with my outline. I have a 'stored type' member (P) with consolidation as (+); and it further has 3 children (C1, C2, C3) - All three as stored type and NO UDA. Out of three children, two members (C1, C2) are getting values from some calculations after running some specific Calc scripts. But for third one (C3), I do L&S and confirm by retreiving it again.
Now when all children have their values stored, I run CalcAll. This results as below:
P = C1 + C2
C1 = C1
C2 = C2
C3 = #Missing
There's no refrence to C3 in any calc script, so I am confused it gets #Missing and it doesn't adds to P.
Any help would be appreciated.
Thanks,
Ashish

Loading at non lev0 members and aggregating with SET AGGMISSIG OFF may protect the data at non lev0 combinatioons that time.
It will not protect the data permanantly as future calc operations has always a chance to overwrite that data.
Follow the below prctices
1) Load high at the non lev0 combination
2) Run the push down calculation to allocate this data to lev0 combinations.
3) Aggregate the data.
Second approch is
If you dont like to tie this data to the any available lev0 members for any reasons.Consider the below hierarchy
---PG
-------PG1
-------PG2
-------PG3
You want to load data at PG member level and dont like to tie for any of the members PG1, PG2 and PG3.
Then add a place holder member PG_I as a sibling to PG3 and load the data to that PG_I.
Then you can see the expected data at PG with out loading high and applying conditions.

Similar Messages

  • Delete row option doesn't work and then becomes greyed out. Need help troubleshooting.

    Hello!
    I'm hoping that someone can please help me troubleshoot an issue I'm having with a table in my form. It has a menu associated with each row that allows you to add, delete, reset, etc. rows. The name of the table on the form is the Purchase Items table. It's the first table on the form.
    Here are the steps to recreate the issue:
    1. Create 3 rows in the table
    2. Click the menu ("X") button associated with the first row.
    3. Select "Delete this row". Nothing happens.
    4. Click the menu ("X") button associated with the first row.
    5. Select "Delete this row" again. Nothing happens.
    6. Click the menu ("X") button associated with the first row. You'll notice that the "Delete this row" option is greyed out.
    My best guess that the rows are being deleted in the background which would explain that if I have 3 rows, and "delete" 2, that my delete option is then greyed out because I believe there is logic in there such that if there is only 1 row then grey out the option to delete rows. I was planning to attach the file as I have seen others do but don't see the option. I'm happy to provide the file via email if that's easier. Thank you in advance!
    Saskia

    I've posted the solution here:
    http://www.fieldeffecttechnologies.com/AdobeForums/PCard.pdf
    The instance manager methods were being given the wrong index of the row to work with. They need to be passed the index for the row that the button you are pressing is in (of course). Instead they were given some v8b index, which I honestly cannot decipher as to what that number possibly means. (Math.round((v3-v4)*v6........)???
    Anyways, I fixed it up and also changed some of the logic in the sub menu to determine what's greyed out.
    I like that feature! Might even show it to a client!
    Kyle

  • My contacts suddenly disappeared from my iphone 6,i dont have a backup on icloud i think,but i have a backup on my computer ,so i made the backup i saw the contacts and then they disappeared again .i need help?

    i cant restore my contacts from computer or icloud ?they disappear when i restore

    HI
    I contacted Apple & did as below as advised & I got my contacts back.
    Before I started I made sure that I had  a Icloud backup for my IPhone ( which was before the problem started ).[ Settings > ICloud > Backup. ]
    IPhone reset - by 'Erase all contents & settings...
    after the phone starts, choose to restore from Icloud backup.. & choose the Backup you think is without the issue.
    VERY IMPORTANT.. Once the phone restores from the backup & the Home screen comes, put the phone in Airplane mode Immediately.
    Now go to settings > Icloud > put the contacts OFF. ( Keep the contacts )
    Now OFF the Airplane mode & go to settings > Icloud > put the contacts ON & select Merge.
    I got all my contacts back which was there until that Backup.
    Thanks again  - Apple support.

  • When I tap a photo in my iPhone photo gallery, the photo appears but there is always a "this movie format not supported" alert and then the alert goes away and the photo appears. These are photos I've taken with the iPhone and aren't even movies.

    It's very odd. I take photos with my iPhone and then later go to view the photos in the Photo Gallery on my iPhone. The photos to appear, but I keep getting "this movie format not supported" alerts, even though I am looking at photos taken by my iPhone. The alert appears briefly just after the photo appears and then the alert goes away and I can see the photo. They are just still photos and not movies. Why wouldn't the iPhone recognize the format of photos it is taking?

    That thread helped for a time.  But now it seems as though my computer is back to slow again.  But, some of the jargon is over my head as well.  Not sure I knew quoite everything they were talking about.  But thanks a lot for that, it helped I probably just need to reread it and follow the instructions again.  Thanks so much.

  • My itouch won't turn on. All that shows is the apple icon and then the screen goes blue to white. Is there a way to fix this or is my itouch unfixable? HELP ME!!!

    My itouch won't turn on. All that shows is the apple icon and then the screen goes blue to white. Is there a way to fix this or is my itouch unfixable? HELP ME!!!

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar

  • I am running Mac OS X Lion on a brand new Mini.  Every now and then, my keyboard goes "dead."  The mouse still works but can't type.  If I restart, everything is fine again.  Is there anything that will fix this problem?

    I am running Mac OS X Lion on a brand new Mini.  Every now and then, my keyboard goes "dead."  The mouse still works but I can't type.  If I restart, everything is fine again.  Is there anything that will fix this problem?
    Also, I am trying to connect my Mini from the mini-Displayport to the Displayport of my Dell U2410 monitor.  The image is very grainy,even though it is set to the correct resolution: 1920 X 1200 at 60Hz.  If I use HDMI to VGA input, the image is much clearer.  Is there a way to get the Displayport to work?

    I'm having exactly the same keyboard issue.  Certainly nothing has ever enhanced my concentration while coding like suddenly becoming unable to type.
    I'm seeing a great many devicemgr and rake errors in my system log.  I don't know if they're related.  How 'bout you?
    If you're unfamiliar with the system log…
    Open /Applications/Utilities/Console.
    If necessary, choose View > Show Log List.
    system.log is at the top of the FILES section.
    Try searching it for hot words like DEBUG, FATAL, and aborted.
    I've found some discussions that would tend to indicate my errors are postGres related – I'm running OS X server.
    -Bryan

  • When I click on my Messages app I can see it for a brief moment and then the screen goes blank

    When I click on my Messages app I can see it for a brief moment and then the screen goes blank.  This happened to me last week and I Reset All Settings, which worked-but it has just happened again so that's not a long-term solution.

    Hello linslaf,
    It may help to force close the Messages app, then restart the device.
    iOS: Understanding multitasking
    http://support.apple.com/kb/HT4211
    iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
    http://support.apple.com/kb/HT1430
    If the issue persists, the next step would be to restore your iiPhone.
    iOS: Back up and restore your iOS device with iCloud or iTunes
    http://support.apple.com/kb/HT1766
    Cheers,
    Allen

  • When I click on itunes store it displays it for a few seconds and then the screen goes blank?

    When I click on the itunes store the info appears for a couple of seconds and then the screen goes blank.  I never had this problem before any ideas?

    same thing with me have you found an answer? the only thing i cant think of is to download the new itues but when i try they are haveing problems with the site or something and i cant dowload it.

  • Work is lost after illustrator freezes and then crashes when copying over to photoshop

    work is lost after illustrator freezes and then crashes when copying items over to photoshop, then when re-opening the illustrator file it gets to the end of reading the file to open then quits again? this keeps happening!

    afrill,
    It seems that you file has become corrupted.
    One thing often tried first is to create a new document and File>Place the corrupted one to see how much may be rescued that way.
    Here is a website where you can see whether it can rescue the file, and if it can, you may pay for a subscription to have it done,
    http://www.recoverytoolbox.com/buy_illustrator.html
    and another similar website,
    http://markzware.com/adobe-software/fix-illustrator-file-unknown-error -occurred-pdf2dtp-file-recovery/
    As far as I remember, the former is for Win and the latter for Mac.
    Here are a few pages about struggling with it yourself:
    http://daxxter.wordpress.com/2009/04/16/how-to-recover-a-corrupted-ill ustrator-ai-file/
    http://helpx.adobe.com/illustrator/kb/troubleshoot-damaged-illustrator -files.html
    http://kb2.adobe.com/cps/500/cpsid_50032.html
    http://kb2.adobe.com/cps/500/cpsid_50031.html

  • Users cannot access removable devices after you enable and then disable a Group Policy setting in Windows 7 64 Bit

    Users cannot access removable devices after you enable and then disable a Group Policy setting on Windows 7 64 bit machines.
    on the 32 bit machines I was able to apply this hotfix
    http://support2.microsoft.com/kb/2738898
    But it will not install on 64 bit machines. 
    Is there a hotfix for 64 bit?  If not, what is the work around?
    Thanks!
    Robert

    Select "Show hotfixes for all platforms and languages", then download x64 hotfix:
    Please take a moment to Vote as Helpful and/or Mark as Answer where applicable. Thanks.

  • My pinned App Tabs do not reappear after I close and then reopen Firefox 4. Why is this happening? What can I do about it?

    Using Firefox 4:
    I right-click on a tab to "pin as app tab."
    The new app tab appears as expected.
    But after I close and then reopen Firefox 4, my app tab(s) no longer appear. They go away. Repeated cycles of the above do not keep the app tabs present .
    Advise on this would be appreciated.
    Thank you.

    I have been having this problem on occasion for a while. (Most recently in firefox 7) I just discovered that I had a phantom firefox.exe process running for some reason. This has the same effect as closing your tabbed window before a non tabbed window. I killed the process and my app tabs magically work again.

  • Some fields value goes missing while hitting backspace

    While hitting backspace on a page the previous page that opens does not hold all the data that was filled in. Some of the field values goes missing. I think it is a browser cache problem. The browser should always rememeber the field values while reloading a page. In some of the cases it does not(specially when backspace is being pressed). Is there any suggestion? Please help me out.

    Hey.. I have encountered the same problem too. Actually if I have some text field elements and if we implement some kind of Javascript or Jquery validation on it and then after moving to next page when we press backspace we do not get previous input values in the previous page. Not only that some times if we do not implement any validation still the values lost while coming back to the previous page by pressing backspace or browser back button. Any suggestion please..

  • Iphoto told me to restore from back up due to corrupt file.  When I restore it, it gets all the way to the end and then it tells me it needs to be restored.  HELP!

    So my iPhoto told me to restore my library from a backup due to a problem with the file.  First, there wasn't enough space so I deleted all kinds of stuff.  I finally got it to restore and then it told me it needed to repair, thumbnmails, etc.  It gets almost all the way to the end and then it tells me the file is damaged and to restore from a backup.  It is like I am in an endless loop and I can't get to my photos.  HELP ME

    I restored it again last night.  After the restore I have 52 GB left of space.  The library is 71 GB.  I opened iphoto and it says there are inconsistencies and it needs to repair.  It is doing the repair now.  What usually happens is that it does the repair and then starts the rebuild thumbnail part and gets to the very end of that before failing

  • How to repair disc on second partition iMac 27? 10.6.8, but second is still 10.6.3.  Can I use the original 10.6.3 install disc to start, and then go to the side needing repair?

    Partitioned iMac 27, Sept. 2010.  Verify disc on HD2 says "corrupted,  needs repair," unspecified.  "Use install disc to repair."  HD2 is isolated from Internet since birth.  HD 10.6.8, but HD2 is still 10.6.3.  Can I use the original 10.6.3 install disc to start, and then go to the side needing repair, without a problem?
    Part 2:  After 4 years, suddenly when HD2 is revived from sleep, it makes an Internet connection, all settings are the same, Network shows Ethernet is unplugged, but the indicator from modem shows connection.  Maybe connected to first part of my question, but maybe not.
    Thank you.

    Graham Giles wrote:
    Have you seen this type of problem before? I think it could be a serious issue for anyone in a similar position.
    No; but then, I've not had occasion to use TDM. I've been using firerwire drives for over 10 years, both FW400 and FW800, with no issues except a bit of instability using a B&W G3 machine.
    TDM should be safe. Using cautious, manual copying of files from the Target machine to the Host machine should not result in unexpected loss of files or damage to the Target drive's directories. It should behave exactly the same as if it were an external (to the Host) firewire drive.
    •  I don't suppose there is anything I can do to 'put back' lost items from a separate Time Machine drive which has an up to date backup on it.
    There is probably a way to do that - seems to me that's one of the reasons for a Time Machine volume.
    On the other hand, if the Time Machine volume is rigidly linked to the now-absent OS on the original drive, there may be no way to effectively access the files in the TM archive.
    I know that using a cloned drive would work well in this instance.
    I have no experience with Time Machine, so perhaps someone who has will chime in with suggestions.
    With the machine in TDM with the other machine, have you tried running Disk Utility to see if you can effect repairs to the drive?

  • My iphone4 disconnecting calls after 3 rings and show these calls as "missed calls" while the person who calls me still hear a dial ring. this started to happend after i upgraded to ios 7.0.4 please advise

    my iphone4 disconnecting calls after 3 rings and show these calls as "missed calls" while the person who calls me still hear a dial ring. this started to happend after i upgraded to ios 7.0.4 please advise
    this is really frustrating since i cant pick up calls with only 3 rings and i always miss them
    i tried to restore like 3-4 times, didnt help
    even tried to set the iphone as a "new iphone" on itunes and it didnt help

    Generally, when going out of the country and using a foreign SIM, carrier files can be changed. Go to Settings>General>About>and look at Carrier? What does it say? You may have to perform a restore. You can try a restore from a backup, that would reinstall the iOS, and would provide the latest AT&T carrier file as well. See if this will fix the problem.

Maybe you are looking for