After last upgrade my ipod isn't working correctly

My ipod had no problems until I took the upgraded program the other night when I attached my ipod to my computer.
After the upgrade, my ipod played about 1 song and then froze. it was a grayish screen that you could see the name of the song & stuff in the background. I checked to make sure the slide on the bottom wasn't on the orange side and I also tried holding the menu button & center button at the same time to reset it. Then for the heck of it I tried holding the center button and the bottom play button & nothing happened. I could see through the gray screen too that the pause button wasn't on. There was a buzzing sound coming through my earphones.
Anyway - I decided to hook it up to my macbook and see if that would help. It came back to life - gray screen with apple, then the connected screen. I let it charge for a couple of hours and came back and properly disconnected it. It played for about 30 min and then did the exact same thing as before.
any suggestions besides erasing/restoring everything from my ipod - i'd rather not but if it is the only way to fix it then i will.

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Similar Messages

After last update facebook messenger is not working correctly

It's happening to 3 different people I know. Once they updated their phone, their Facebook Messenger Service is not working Correctly. They have already deleted and reinstalled the app.
Any suggestions? Is this last update known to cause this?

razmee209 is correct.
If deleting the app doesnt help you could try a back up and restore as new to determine a software or hardware issue. But if the app doesnt work on the iOS it is not the iPhones fault it is the apps. Apps are meant to be compatible and run on iOS not the other way around. If the app fails to run on the iOS it is something that would need to be taken up with the app developers.

[SOLVED] Unable to boot after last upgrade [HP Smart Array]

Hello guys.
After last upgrade I'm unable to boot. I have fileserver with 2 discs in HP Smart Array RAID 1.
While booting, kernel is unable to find my raid (should be cciss) and therefore lvm2 hook fails to find root partition. While going into recovery, I can chroot without an issue, lsmod shows that cciss driver is properly loaded, disk exits in /dev/cciss/, logical group and volumes are detected properly.
No matter what I do, I just can't get cciss module into kernel. Putting in MODULES in mkinitcpio.conf's MODULES="" didn't help. I'm listing my initramfs images and there is no cciss.ko. I'm also searching for module in my filesystem and can not find it.
Any help will be appreciated.
Last edited by edke (2012-06-04 10:39:20)

Thank you for your quick reply.
DSpider wrote:First of all, have you tried the Fallback entry? Because initramfs-linux-fallback.img is supposed to have a full range of modules.
Of course, no change.
DSpider wrote:
Second, after editing /etc/mkinitcpio.conf you need to regenerate your initramfs.
# mkinitcpio -p linux
But the MODULES section needs to have something in there...
Here's mine:
MODULES="pata_amd sata_nv ehci-hcd ohci-hcd ext2 ext3 ext4 vfat snd-hda-intel"
You probably need "mdadm" or "mdadm_udev" in there too, I'm not sure... I don't use RAID, but maybe these will help:
https://wiki.archlinux.org/index.php/Mk … Using_RAID
https://wiki.archlinux.org/index.php/So … ID_and_LVM
HP Smart Array is hardware RAID, therefore I don't need mdadm. Right module should be cciss, but this is somehow not working. Adding this into MODULES does not add cciss module to image.
When I'm booting from Arch install for recovery and chroot, cciss is loaded and my HP Smart Array disk is visible.

[NEARLY SOLVED] font rendering in gtk apps problem after last upgrade

Im' using KDE, cairo-lcd, libxft-lcd... my fonts looked beautifully, but now they look horrible...
After last upgrade my gtk apps (firefox, thunderbird) render fonts in an ugly way...
I've tried to revert to pango 1.16.5 with no lucky result (the same problem)...
here is the log:
[2007-08-19 14:56] upgraded bind (9.4.1_P1-2 -> 9.4.1_P1-3)
[2007-08-19 14:56] upgraded glib2 (2.14.0-2 -> 2.14.0-3)
[2007-08-19 14:56] upgraded gnupg2 (2.0.5-1 -> 2.0.6-1)
[2007-08-19 14:57] upgraded gtk2 (2.10.14-2 -> 2.10.14-3)
[2007-08-19 14:57] upgraded kernel26ck (2.6.22.2.ck1-1 -> 2.6.22.3.ck1-1)
[2007-08-19 14:57] upgraded libdownload (1.1-1 -> 1.1-2)
[2007-08-19 14:57] upgraded libevent (1.3b-1 -> 1.3d-1)
[2007-08-19 14:57] upgraded libxtst (1.0.2-1 -> 1.0.3-1)
[2007-08-19 14:57] upgraded nvidia-ck (100.14.11-2 -> 100.14.11-3)
[2007-08-19 14:57] upgraded sip (4.6-1 -> 4.7-1)
[2007-08-19 14:57] upgraded pyqt (3.17.2-1 -> 3.17.3-1)
[2007-08-19 14:57] upgraded xf86-input-joystick (1.2.2-1 -> 1.2.3-1)
[2007-08-19 14:57] upgraded xorg-server-utils (1.0.4-1 -> 1.0.4-2)
[2007-08-19 14:57] upgraded xorg-utils (1.0.2-2 -> 1.0.2-4)
[2007-08-19 14:57] upgraded xorg-xdm (1.1.5-1 -> 1.1.6-1)
[2007-08-19 14:57] upgraded xterm (225-1 -> 229-1)
[2007-08-21 00:16] upgraded cpio (2.8-1 -> 2.9-1)
[2007-08-21 00:16] upgraded ed (0.5-3 -> 0.8-1)
[2007-08-21 00:16] upgraded initscripts (2007.08-1 -> 2007.08-2)
[2007-08-21 00:16] upgraded intltool (0.36.0-1 -> 0.36.1-1)
[2007-08-21 00:16] upgraded libarchive (2.2.5-1 -> 2.2.6-1)
[2007-08-21 00:16] upgraded man-pages (2.60-1 -> 2.64-1)
[2007-08-21 00:16] upgraded pciutils (2.2.4-2 -> 2.2.6-1)
[2007-08-21 00:16] upgraded readline (5.2-2 -> 5.2-3)
[2007-08-22 00:16] upgraded gdbm (1.8.3-3 -> 1.8.3-4)
[2007-08-22 00:17] upgraded kernel26 (2.6.22.3-1 -> 2.6.22.4-2)
[2007-08-22 00:17] upgraded lcms (1.16-1 -> 1.17-1)
[2007-08-22 00:17] upgraded libice (1.0.2-1 -> 1.0.4-1)
[2007-08-22 00:17] upgraded libxrender (0.9.2-1 -> 0.9.3-1)
[2007-08-22 00:17] upgraded procinfo (18-3 -> 19-1)
[2007-08-22 00:17] upgraded xorg-apps (1.0.2-4 -> 1.0.3-1)
[2007-08-22 23:49] upgraded kernel26 (2.6.22.4-2 -> 2.6.22.4-2.1)
[2007-08-22 23:49] upgraded librsvg (2.18.0-1 -> 2.18.1-1)
[2007-08-22 23:49] upgraded libxpm (3.5.6-1 -> 3.5.7-1)
[2007-08-22 23:49] upgraded libxaw (1.0.3-1 -> 1.0.4-1)
[2007-08-22 23:49] upgraded makedev (3.8.3-1 -> 3.23-1)
[2007-08-22 23:49] upgraded mcpp (2.6-1 -> 2.6.4-1)
[2007-08-22 23:49] upgraded naim (0.11.8.2.1-1 -> 0.11.8.3.1-1)
[2007-08-22 23:49] upgraded nfs-utils (1.0.12-2 -> 1.0.12-3)
[2007-08-22 23:49] upgraded pam (0.81-4 -> 0.99.8.1-3.1)
[2007-08-22 23:49] upgraded pango (1.16.5-1 -> 1.18.0-1)
[2007-08-22 23:49] upgraded sox (13.0.0-1 -> 13.0.0-2)
[2007-08-22 23:49] upgraded xorg-apps (1.0.3-1 -> 1.0.3-2)
[2007-08-22 23:49] upgraded xtrans (1.0.3-1 -> 1.0.4-1)
[2007-08-25 15:25] upgraded glibc (2.6.1-1 -> 2.6.1-2)
[2007-08-25 15:25] upgraded bftpd (1.9-1 -> 2.0-1)
[2007-08-25 15:25] upgraded gcc (4.2.1-3 -> 4.2.1-3.1)
[2007-08-25 15:25] upgraded gtk-doc (1.8-2 -> 1.8-3)
[2007-08-25 15:25] upgraded hal-info (0.20070618-1 -> 0.20070725-1)
[2007-08-25 15:25] upgraded perl-xml-simple (2.16-2 -> 2.18-1)
[2007-08-25 15:25] upgraded icon-naming-utils (0.8.2-2 -> 0.8.5-1)
[2007-08-25 15:26] upgraded kernel26 (2.6.22.4-2.1 -> 2.6.22.5-1)
[2007-08-25 15:27] upgraded kernel26ck (2.6.22.3.ck1-1 -> 2.6.22.5.ck1-1)
[2007-08-25 15:27] upgraded libgnomeprint (2.18.0-1 -> 2.18.1-1)
[2007-08-25 22:41] removed libgnomeprintui (2.18.0-1)
[2007-08-25 22:41] removed libgnomeprint (2.18.1-1)
i dunno what happened...
plz, someone help me
regards
Last edited by saneone (2007-08-30 18:11:32)

Bogart wrote:
I think the spacing now is correct, while before it was wrong. The only "problem" is that you got used to a bad font rendering, and now that it has changed for better you feel like it's different and don't like it.
Really, *most* of the problems that people find in Linux's fonts are just because they are used to the awful default fonts from Windows XP. Yes, people can even get used to those fonts and believe they're good!!! And when they see correct fonts in Linux they think they're bad...
What I would do is remove the MS TTF fonts. They work bad in Windows and worse in Linux. You should use Bitstream Vera or DejaVu if you want good quality fonts (especially in web pages).
But, then again, you might think that they look wrong just because you're not used to it... Oh, well...
What does correct font / correct spacing mean ?
IMO, that doesn't make any sense, because that's a totally subjective matter, like many other things in this world.
BTW, I love how fonts look in Windows, and I think that must be the only thing MS got right. Thus, I'm using ms fonts in linux, and a rendering as close as possible (no autohinting or antialiasing or subpixel rendering).
Similarly, I could find a woman beautiful that you would find ugly or just average. We are all different, and it's better that way

Startdict crashes after last upgrade

Startdict crashes after last upgrade
$ stardict
XDXF data parsing plug-in loaded.
HTML data parsing plug-in loaded.
Dict.cn plug-in loaded.
Man plug-in loaded.
PowerWord data parsing plug-in loaded.
WordNet data parsing plug-in loaded.
Spelling plugin loaded.
Wiki data parsing plug-in loaded.
QQWry plug-in loaded.
WordNet dict rendering plug-in loaded.
bookname: slovnyk_en-pl, wordcount 15424
bookname: slovnyk_pl-en, wordcount 20087
bookname: StarDict dictionary, wordcount 9
[warning] Binding '<Ctrl><Alt>x' failed! Already assigned.
(Gdk) [critical] IA__gdk_window_set_cursor: assertion `GDK_IS_WINDOW (window)' failed
ERROR:compositelookup.cpp:34:void CompositeLookup::send_net_dict_request(const std::string&, const std::string&): assertion failed: (NetDictRequests.end() == std::find(NetDictRequests.begin(), NetDictRequests.end(), request))

Maybe (because of occurrences of NetDictRequests) it is caused by internet modules which you don't have to need. I use just my local dictionaries and my ~/.stardict/stardict.cfg looks like:
[stardict-private]
version=1.0
[/apps/stardict/manage_dictionaries]
dict_order_list=/usr/share/stardict/dic/quick_italian-english.ifo/usr/share/stardict/dic/encz.ifo/usr/share/stardict/dic/czen.ifo/usr/share/stardict/dic/stardict-dict/stardict-dict.ifo
dict_config_xml=<dictgroup name="Default Group"><querydict><localdict enable="true" file="/usr/share/stardict/dic/quick_italian-english.ifo"/><localdict enable="true" file="/usr/share/stardict/dic/encz.ifo"/><localdict enable="true" file="/usr/share/stardict/dic/czen.ifo"/><localdict enable="true" file="/usr/share/stardict/dic/stardict-dict/stardict-dict.ifo"/></querydict><scandict><localdict enable="true" file="/usr/share/stardict/dic/quick_italian-english.ifo"/><localdict enable="true" file="/usr/share/stardict/dic/encz.ifo"/><localdict enable="true" file="/usr/share/stardict/dic/czen.ifo"/><localdict enable="true" file="/usr/share/stardict/dic/stardict-dict/stardict-dict.ifo"/></scandict></dictgroup>
dict_default_group=Default Group
[/apps/stardict/preferences/dictionary]
only_scan_while_modifier_key=true
use_scan_hotkey=false
enable_sound_event=false
[/apps/stardict/preferences/network]
enable_netdict=false
[/apps/stardict/preferences/main_window]
hide_on_startup=true
search_website_list=
window_width=680
window_height=359
hpaned_pos=114
(Well, there are some strange symbols after ".ifo"s on "dict_order_list=" line, they couldn't be pasted.)
Internet (mainly those Chinese) modules are really unusable for me, so the first thing I do when I install StarDict is I delete all occurrences of <virtualdict ... /> and <netdict ... /> in the configuration file. Maybe it will help you too if you keep just <localdict ... /> items.
There's other thing that bothers me now with StarDict - RealPeopleTTS works fine with the version 3.0.1-3 but hesitates to with the up-to-date version 3.0.2-2.
Last edited by nemamradfazole (2011-01-23 01:33:27)

I have an hp office jet 4500 and os maverick 10.9.4 and I can't get it to print after last upgrade, multiple malfunctions and error, help?

I have an hp office jet 4500 and os maverick 10.9.4 and I can’t get it to print after last upgrade, multiple malfunctions and error, help? I have tried deleting and resetting printer and re-installing update 6 times. Last update attempt showed none available??? I can’t load the software directly from HP because their only option is to use the software update option on the mac....frustrated!!! Help!!
I get blank pages that just run through the printer and a stats window that just 33% complete and goes no further.

I am going on the guess that an old driver is still installed...
Use Finder Go > go to folder, and go to /Library/Printers and delete the HP folder(s).
Reset the Printing System:
OS X Mavericks: Reset the printing system
Now, Add the printer in Print & Scan prefs.

My iPod touch isn't working correctly.it is displaying a white light and no matter what i try it isn't helping.tries holding the reset and power button together and tryed holding the power button in but it doesn't work. please can someone help?

my iPod touch isn't working correctly.it is displaying a white light and no matter what i try it isn't helping.tries holding the reset and power button together and tryed holding the power button in but it doesn't work. please can someone help?

Try the remaining items in the white-screen topic of.
iPod touch: Hardware troubleshooting
If not successful. let the battery fully drain and then charfe for an hour and try again.
Frequently a white scree nis due to a hardware problem.

After yosemite upgrade junk mail does not work - is this a known issue

after yosemite upgrade junk mail does not work - is this a known issue?

Yes, it is a problem.

Wallaby animation isn't working correctly after app update

Hi DPS fellows,
This afternoon I've updated my Adobe Content Viewer and all my wallaby animations began to work in a different way.
It's just fades in instead of doing the animation.
Most of them are just animated letters for a headline. The animations consist in each letter appear at different time, sometimes coming form right, some form left or from the top of the page, but after the updated, they just appear in a fade in. Before tha worked pretty fine.
Does anybody here knows how to solve that?
Thanks a lot.

Hi!
I have a German manual with a step by step list. How you can use Path-Objects (Text and Frames) for an Wallaby HTML5 animation. And used in the Adobe DPS Folios.
If you want to have the manual in German, I can send you this e-mail tomorrow!
Bye!
Von: Felipe - dualpixel [email protected]
Gesendet: Mittwoch, 13. März 2013 22:10
An: D4c_Rene
Betreff: Wallaby animation isn't working correctly after app update
Re: Wallaby animation isn't working correctly after app update
created by Felipe - dualpixel <http://forums.adobe.com/people/Felipe-dualpixel> in Digital Publishing Suite - View the full discussion <http://forums.adobe.com/message/5146016#5146016

After downloading yosemite the sound isn't working for safari

I have a 13' Macbook Pro Retina and after downloading yosemite the sound isn't working for safari or google chrome, however, sound works for all other applications such as iTunes and notifications as far as I know. How do I get sound back for safari or chrome?

Reset PRAM. http://support.apple.com/kb/PH18761
Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".

I tunes is missing after last upgrade help! Please

After last upgrade I noticed ITunes App is not on iPad. How do I get it back? I tried to download it again but all I get is it comes loaded on iPad. Can anyone help me. Thank you

Home Screen: Missing App Store, FaceTime, iTunes or Other Icon

After last upgrade Apple TV 3 blue dots not disappearing after podcast is watched. How do I fix?

After last upgrade Apple TV 3 blue dots not disappearing after podcast is watched. How do I get them to disappear like they always have?

That crash appears to be casued by the Facebook plug-in.
Create a new account (systempreferences -> accounts or Users & Groups on 10.7 and 10.8), make a new Library in that account, import some shots and see if the problem is repeated there. If it is, then a re-install of the app might be indicated. If it's not, then it's likely the app is okay and the problem is something in the main account.

Please help! iPod isn't working... : (

*_My iPod isn't working and nothing responds to it, so I sent it into Apple. They said it was submerged in water (even though I only had it a week and it didn't get near water) so I need to try to get it fixed. I would like to know if there are any recommendations on where to get this fixed and if anyone has an estimate as to how much this may cost. Any information or comments are usefull-please and thank you._*

These people will give you an estimate: http://www.missionrepair.com/iPodTouch_Diagnostic_Servicep/222-1000.htm

In CS5, the font size in the type tool isn't working correctly. example: 30 point looks like 4 point

In CS 5, the font size in the type tool isn't working correctly.
Example: 30 point looks like 4 point
How can I correct it?

In case you have not fixed this, take a look at your Image Size (Ctrl Alt i). The default when you make a new document window is 72ppi which can result in smaller text than you sometimes expect. If you open Image size, turn off resample, and change the resolution to something like 300, you'll get much larger type for the same settings.
For this reason one of the first things I do after installing Photoshop, or resetting Preferences, is to open Preferences > Units & rulers, and set Type to mm. This way I know that if the document is set to A4, and orientated in landscape (297mm x 210mm) setting text to 21mm is going to result in type exactly one tenth the height of the document.
I believe people in America still use inches, but unfortunately inches are not an option for Type units in Preferences. It is easy enough to work it out in your head though. A 10x8 document with type set to 25mm will give you text one eighth the height of the document.
The bottom line is you can at least predict what is going to happen when setting text size.

How do you make sure the iPod touch is working correctly

Is there a place where we can do a check to see if iPod touch is working correctly?

An Apple Store or authorized Apple retailer.

After last upgrade my ipod isn't working correctly

Similar Messages

Maybe you are looking for