After system copy new system size is leeer than old system

Hii,
Our client system is upgrading now. So Production BW system copy is done to new system.
New system size is lesser than the Production system.
Could any one let me know why this was happen. All the available in production BW is availalable in New system then also the new system size is less.
Regards,
sharma.

Usually when you delete data from a table , the table space will not get released- you will have to run a reorg on the database so that the additional space gets released.... if you do the same on the production system then the spaces should get aligned. Also run BRCONNECT on the copy as well so that everything is in line.
Arun

Similar Messages

System Copy -- database PRR conains user object belongs to system user dbo

Hi all,
I am having an issue while performing the system copy for the sql server.
Actions taken so far.
1.Detached the database.
2.Installed central instance in the target system .
3.Attached the database using attach as option.
4.Then used STM coll for the conversion.
5.Bought sap in Up condition.
Before detaching the database made export for java addin abap in source system
Then I am trying to import the java add in abap using sapinst(system copy option)..In the half of the way i am getting the below message as ..
DATABASE QAS containus user object belongs to system user dbo.
I have performed the 551915 , 151603 but the still the same message is dispalying.
In log files. inserting
TRACE [iaxxejsexp.cpp:208]
EJS_Installer::writeTraceToLogBook()
- Database XIA contains user objects belonging to system user dbo
TRACE [iaxxbjsmod.cpp:301]
CJSlibModule::showMessageBox_impl()
<html> <head></head> <body> <b>Problems were found after checking configuration of database server b><br>- Database XIA contains user objects belonging to system user dbo<br><br>SOLUTION: Fix these problems to continue the installation. </body> </html>
TRACE [iaxxgenimp.cpp:845]
showDialog()
waiting for an answer from gui
TRACE [iaxxdlghnd.cpp:180]
CDialogHandler::doHandleDoc()
ACTION_OK received
ERROR 2009-01-09 12:52:31 [iaxxinscbk.cpp:289]
abortInstallation
MDB-05919 Errors were found when checking connection to or configuration of database server (listed above in the log file).
TRACE [iaxxejsbas.hpp:270]
EJS_Base::dispatchFunctionCall()
JS Callback has thrown std::ESAPinstException: ESAPinstException: error text undefined
TRACE [syxxcfsmgt.cpp:430]
CSyFileSystemMgtImpl::getFile(iastring,bool)
lib=iamodmssql module=CIaNtMssDmo
WARNING: THE FUNCTIONALITY YOU ARE USING IS DEPRECATED: getFile(const iastring & sFullName, bool bCaseSensitive) const. Use getFile(const PSyFSPath &) const instead.
TRACE [syxxcfsmgt.cpp:195]
CSyFileSystemMgtImpl::getNode(iastring,bool)
lib=iamodmssql module=CIaNtMssDmo
WARNING: THE FUNCTIONALITY YOU ARE USING IS DEPRECATED: getNode(const iastring & sFullName, bool bCaseSensitive) const. Use getNode(const PSyFSPath &) const instead.
TRACE [syxxcfsmgt.cpp:921]
CSyFileSystemMgtImpl::isExisting(iastring,bool)
lib=iamodmssql module=CIaNtMssDmo
WARNING: THE FUNCTIONALITY YOU ARE USING IS DEPRECATED: CSyFileSystemMgtImpl::isExisting(const iastring & , bool , ISyNode::eNodeType ) const. Use CSyFileSystemMgtImpl::isExisting(const CSyPath & , ISyNode::eNodeType ) const instead.
WARNING 2009-01-09 12:52:31 [iaxxccntrl.cpp:477]
CController::stepExecuted()
The step dSetActionUnattended with step key J2EE_EngineEnterprise_Addin_OneHost|ind|ind|ind|WebAS|630|0|J2EE_EngineEnterpriseDialogs|ind|ind|ind|WebAS|630|0|J2EE_Engine|ind|ind|ind|J2EE_Engine|630|0|MssJ2eeDBSetup|ind|ind|ind|ind|ind|0|MssDatabaseInfo|ind|ind|ind|ind|ind|0|dSetActionUnattended was executed with status ERROR.
TRACE [iaxxcsihlp.hpp:301]
main()
An error occurred during the installation of component SAP NetWeaver '04 SR1> SAP System Installation> Java Add-In for ABAP> MS SQL Server> Central / Distributed System> Java System Finalization. Press the log view button to get extended error information or press OK to terminate the installation. Log files are written to SAP NetWeaver '04 SR1> SAP System Installation> Java Add-In for ABAP> MS SQL Server> Central / Distributed System> Java System Finalization.
TRACE [iaxxgenimp.cpp:845]
showDialog()
waiting for an answer from gui
TRACE [iaxxdlghnd.cpp:180]
CDialogHandler::doHandleDoc()
ACTION_OK received
WARNING 2009-01-09 12:52:33 [iaxxcsihlp.hpp:250]
main()
An error occurred during the installation.
Regadrs
Vijay

Hi,
what do you get executing this statement:
use <SID>
go
select * from sys.objects where schema_id =
(select schema_id from sys.schemas where name = 'dbo')
go
Sven

After archive and install, can you go back to old system?

After some trouble with permissions, I decided to do a clean archive and install from 10.2.8. Too late I realized that the install would be 10.2.
The permission trouble did not go away, and now I have additional trouble with upgrading everything, the combo upgrade to 10.2.8 does not work, error messages etc.
Is there a way I can undo this and use my old system 10.2.8 again which is saved in a folder?
Thanks.

Hiltraut:
As ali brown has already pointed out your iMac does, indeed, have 2 Firewire ports. Depending on which optical drive you have (the computer shipped with CD-RW, DVD/CD-RW, or SuperDrive) you can install Tiger directly.
Since you have an older version of Jaguar, and since it does not seem to be very co-operative, I suggest that you seriously consider upgrading to Panther or Tiger. To install Panther your computer will need to meet the minimum system requirements for Panther. You will need to purchase the Full Retail version of Panther.
To install Tiger your computer will need to meet the minimum system requirements for Tiger. You will need to purchase the Full Retail version of Tiger.
You can purchase universal installer versions of Panther, guaranteed to install, or Tiger on CDs, from applerescue. Please note that Computer specific or upgrade versions should be avoided since they are optimized for the computer to which they are specific and will therefore, very likely, cause problems during or after installation. On the legal side, it may be a violation of the Software License Agreement which statesThis License allows you to install and use one copy of the Apple Software on a single computer at a time. This License does not allow the Apple Software to exist on more than one computer at a time...
If you decide to go that route please post back for assistance with how to proceed.
Good luck.
cornelius

System copy of a ABAP+J2EE WAS 6.40 system - issue w. J2EE instance/Mapbox

Hi guys and girs!
I'm doing a system copy of a CRM 4 system based on Web AS 6.40 and with a dual stack system.
The J2EE instance is only used for Mapbox and nothing else.
I've done a system export of the J2EE instance on the source system, but when I import it, it gives me the following message "No SAP data found in database CRD"
Is this because Mapbox does not use the database or have I done something wrong?
I run sapinst.exe and choose SAP CRM 4 - System Copy - Target System - Java system - MS SQL Server - Migration-Target System Installation to import the exported data.
Maybe there is no data?!?! and I sould only install a Java central instance and then deploy the mapbox package with SDM?!
regards
rollo
Edited by: rollo on Dec 10, 2008 3:14 PM

Hi!
No, I haven't figured it out.
But since we are not going to use the groupware integration for some time, I might just skip it and install it during or after the upgrade.
rollo

New ECC system with new org structure into existing CRM 7 system

Hi,
We have a situation where we have a current ECC 6 system which distributes organisation structure to a CRM 7 system using ALE (org units, positions, personnel numbers).
We are implementing a new ECC 6 instance as a result of a merger which will have a new org structure, the CRM 7 system remains.
My question is has anyone dealt with a similar situation where a new org structure is distributed into an existing CRM or SRM system? Any lessons you could share? Or tips for how to approach this?
Thanks
Marc

You need to schedule program RHALENI in Insert mode to achieve the same
Thanks,
Sundeep

Newer drivers on Support website than on System Update?

Sorry if this is an obvious question but: am I right in feeling that there are newer drivers for my T440s on the Lenovo Support page than are being offered to me when I run System Update?
If so, how come?
Are these betas? Should I be watching the Support page as well as running Update?
Just want to stay sensibly up to date. Thanks for any help you guys can offer.

'evening.
In my experience, System Update can lag behind a model's driver matrix. I routinely look at what TVSU is offering me and then go look at the matrix for comparison. If a TVSU-offered package for something I want matches the matrix, then I let it install it. Generally speaking, though, I'm pretty conservative about driver updates.
Lastly, I don't think I've ever seen a true beta driver in the matrices for my ThinkPads.
Hope this helps.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество
Community Resources: Participation Rules • Images in posts • Search (Advanced) • Private Messaging
PM requests for individual support are not answered. If a post solves your issue, please mark it so.
X1C3 Helix X220 X301 X200T T61p T60p Y3P • T520 T420 T510 T400 R400 T61 Y2P Y13
I am not a Lenovo employee.

After Client copy workflow is functionality is working as old Template

Hi Experts,
PO Workflow is working fine in Development and Quality servers,
Due to some requirement client copy is made from Quality to Development.
Once client copy is completed the PO workflow is not working as per the current functionality,
Its working as the Previous four Transports (i.e; ol d Template functionality)
In workflow Analysis log we are able to see the workflow template flow as the old template flow.
Recent Activity steps functionality is skipped.
In quality Server Workflow functionality is fine
Kindly advise me to solve this Problem
Thanks,
Ganesh

yes i am able to see the recent version in the WF Template by entering through SWDD.
PO WF worked good in Quality and Development servers till 3 days back
once the client copy is made, from Quality to Development.
In Development server it is working as previous 4 TRs functionality
able to see the current version template.
Thanks,
Ganesh
Edited by: ganesh yarramsetty on Dec 21, 2009 8:27 AM
Edited by: ganesh yarramsetty on Dec 21, 2009 8:30 AM

Airport Drives Me CRAZY! New 802.11n Network Slower Than Old 802.11g/b

I've been using Macs since 1988 and consider myself an advanced user. However, every time I setup a new Airport wireless network or re-configure an existing one, I feel like a helpless newbie trying to figure out how to open a folder on my desktop. No matter how many times I read the manual or the help files or these forums, I can never grasp what seems like it should be a simple path from A to B to C.
Anyway, here's my current situation: I've been successfully (I think) running a 6 year old AP Extreme Base Station [AE] (in my home office addition) and 2 Airport Expresses [AX] (one AX roughly 15 feet from the base station--through sheetrock, and the second AX roughly 30 feet from the first AX--through sheetrock and some wooden stairs. (so roughly 45 feet from AE to 2nd AX). It wasn't the speediest thing going but it did the trick with older Macs.
I recently bought a MacBook Pro which supports 802.11n. I most often use this laptop at the point in the house furthest away from the AE (Base Station) The AE (Base Station) is in my home office connected to my MacPro desktop (see #1 below). In addition, the family iMac is also in that room furthest from the AE. Using the new MacBook Pro with the old 802.11/g/b network turned out to be painfully slow. I was experiencing the same slow network connection my family has complained about for years with their older Macs and 802.11g/b.
I decided it was time to upgrade the whole network, if only to speed up my MacBook Pro connection. Bought new 802.11n Airport Extreme (MC340LL/A) and 2 new 802.11n Airport Expresses (MB321LL/A). Setup did not go smoothly. Again, my normally competent Mac persona was reduced to a babbling three-year-old. Had three different Apple techs on the phone trying to help me through it. Got different, contradictory instructions from the last two. Finally got all three units working, only to find that not only does my MacBook Pro seem even more sluggish than when connected to the old 802.11g/b network, but my wife tells me web pages are taking at least twice as long to load as with the old network.
As concisely as I can lay this out:
*1. Airport Extreme (Base Station)*
Connected via Ethernet from its WAN port to my Comcast cable modem. One Ethernet (LAN) port on that AE is then connected via Ethernet to my Netgear 8-port Ethernet switch. Ethernet from switch to Ethernet port 1 on my MacPro. (MacPro does NOT have an Airport card because I forgot to order one. Also I confirmed that this setup was functional by connecting to the AE wirelessly with my MacBook Pro showing the name I'd given the new network prior to adding the two AX's to the mix).
Some Airport Extreme settings of note (all accessed via "Manual Setup" button):
Airport Tab > Summary
Version 7.5.1
Wireless Mode: Create a wireless network
Channel: 149 (Automatic), 1 (Automatic)
Wireless Clients: 3
Airport Tab > Base Station:
Allow Setup over WAN: Unchecked
Airport Tab > Wireless:
Allow this network to be extended: Checked
Airport Tab > Guest Network:
Nothing checked
Airport Tab > Access Control:
MAC Address Access Control: Not Enabled
Internet Tab > Internet Connection:
Connect Using: Ethernet
Ethernet WAN Port: Automatic (Default)
Connection Sharing: Share a public IP address [Think this one is probably wrong]
Internet Tab > TCP/IP:
Configure IPv4: Using DHCP
Internet Tab > DHCP:
Shows Beginning & Ending Address
Internet Tab > NAT:
Enable default host at: Unchecked and blank field
Enable NAT Port Mapping Protocol: Checked
Internet Tab > Advanced
Didn't touch anything here, so all at defaults
*2. Airport Express #1: Living Room Express (Closest to AE (Base Station)*
Airport Tab > Summary
Version 7.4.2
Wireless Mode: Extend a wireless network
Connect using: Wireless Network
Channel: 1 (Automatic)
Wireless Clients: 1
Airport Tab > Base Station:
Allow Setup over the Internet using Bonjour: Unchecked
Airport Tab > Wireless:
Wireless Mode: Extend a wireless network
Allow wireless clients: checked
Airport Tab > Access Control:
MAC Address Access Control: Not Enabled
Internet Tab > Internet Connection:
Connect using: Greyed-out, not selectable
Connection sharing: Greyed-out, not selectable
Internet Tab > TCP/IP:
Configure IPv4: Using DHCP
Shows IP Address
Internet Tab > Advanced
Didn't touch anything here, so all at defaults
*3. Airport Express #2: Dining Room Express (Furthest from AE (Base Station)*
Airport Tab > Summary
Version 7.4.2
Wireless Mode: Extend a wireless network
Connect using: Wireless Network
Channel: 1 (Automatic)
Wireless Clients: 2
Airport Tab > Base Station:
Allow Setup over the Internet using Bonjour: Unchecked
Airport Tab > Wireless:
Wireless Mode: Extend a wireless network
Allow wireless clients: checked
Airport Tab > Access Control:
MAC Address Access Control: Not Enabled
Internet Tab > Internet Connection:
Connect using: Greyed-out, not selectable
Connection sharing: Greyed-out, not selectable
Internet Tab > TCP/IP:
Configure IPv4: Using DHCP
Shows IP Address
Internet Tab > Advanced
Didn't touch anything here, so all at defaults
SETUP/GOALS:
With Airport Extreme (Base Station) as the starting point, have the two Airport Express units with the strongest, fastest signal possible, provide Internet access (and file sharing, iTunes speakers capability) to three Macs (one older iMac, one older PowerBook and my new MacBookPro). Again, I believe my new MacBook Pro is the only one with 802.11n support, so I don't expect the other Macs to take advantage of the speed boost offered by the three new 802.11n devices.
+Any and all help with this will be greatly appreciated. Thanks!+

{quote}With the AirPort Extreme, in the AirPort panel, Wireless tab, click on the button for "Wireless Network Options", check the box for "5 GHz Network Name", and enter a different network name. (That can be trivially different, such as the name of the main network suffixed with an underscore and the digit 5.) Once configured that way, connect your "N" gear to each network in turn to see if one is any better than the other. (If you're wondering what effect this would have, it allows segregating your "N" gear from the older gear to prevent the older gear from slowing down your network. However, distance and interference from things like walls may negate any advantage.){quote}
William: I was gone most of yesterday, but had a chance to implement your recommendations today. I added the 5 GHz network as you suggested, but in order to connect to that at all with my 802.n11 MacBokk Pro, I need to be within a few feet of the AE (base station). If I try to access that network even from the next room (well within reach of both the AE and the livingroom AX, I get one bar and "failure to connect" messages just trying to logon to that network.
However, I did some experimenting that (as of right now, anyway) resulted in much faster network access, not only from my MacBook, but also from the older iMac which is the furthest Mac from the AE. According to my wife, that iMac is "loading web pages faster than I've ever seen them!"
Here's what I did:
1. Moved all three units to places where it seemed they would have the least amount of interference with the clearest path from unit to unit, also raising the height of both AXs from about 2-3 feet from the floor to about 5-6 feet from the floor.
2. Changed one setting on the AE (base station): Wireless Tab > Wireless Network Options > Multicast Rate ---> Changed this from Low to High.
I have a feeling the location shifts made the real difference, but I will try changing the multicast rate back to "Low" just to see what happens.
Paul

Exchanging ink - New printer uses different ink than old one

I just posted my issue and do not see it anywhere. Here it is again.
I was told by the gentleman at HP that I could exchange my ink that I can no longer use because I just upgraded to a different HP printer. My ink is new and very costly. How does this work?

Hi bodhi1. You should contact support for any details that may exist on exchanging ink.
Please call HP technical support at 800-474-6836. If you live outside the US/Canada Region please click the link below to get the support number for your region. http://www.hp.com/cgi-bin/hpsupport/index.pl
TwoPointOh
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Migration of old system with new version and 64bit hardware

HI Sapguru's,
Our req: Build New CRM system with all latest version of software & 64 bit hardware. Details mentioned below.
Old System:
CRM 4.0 ABAP System
win 2003
Oracle 9i
non-unicode
32 bit hardware
New System( which i want to build):
CRM 5.2 (rampup version) ABAP+JAVA
win 2003
Oracle 10g
Unicode
64 bit hardware
Above mentioned is an new requirement for us.
Our Plan:
1. Old system -Conversion from non-unicode to Unicode system
2. Old system - System copy export method for create exports
3. Build New system with new unicode version(5.2) with Old system exports
Questions to Sapguru's:
1. Our plan will work or not?
a. If Yes - give me the guidelines ,Notes ,documentation paths
b. If No - Please provide your opinions/advices
2. 32 bit exports will work on 64 bit hardware SAP system?
Thanks Advance.
Regards,
Ramu,

Hello Markus,
Thanks for your quick response!!!!
I understood - what you have mentioned for my question but i have one clarification on your answer and one new questions to you.
Clarification:
My oldsystem is non-unicode system. As you said i will do system copy export method on old system(non-unicode) then i will use that exports(non-unicode) to build new system.
Here my clarification is:
Will that exports(non-unicode) work while installing new system with unicode? or Will it give any problem?
Question:
1. will old system with oracle 9i exports work on new system with oracle 10g?
Thanks Advance,
Bhaskar Rapelli

Logical System Name after System Copy

Hello,
I have three questions about the logical system name after system copy.
Q1) When I change SID D22 to S11 during system copy,
do I have to change the logical system name of all clients in the target system? The target system is used for test, and the landscape has S11 and Virtial system. The target system S11 does not communicate with the source system D22.
Q2) If the answer for Q1 is YES, is it correct that the following procedure for changing logical system name?
1.Tr-CD:BD54
Add new logical system name for all clients in the target system.
2.Tr-CD:SCC4
As for all clients, select new logical system name with F4 help.
Q3) If the answer for Q1 is YES, do I have to add new RFC connection entries with SM59 for all clients in the target system?
I refer to the guide "Homogeneous and Heterogeneous
System Copy for SAP Systems Based
on SAP Web Application Server
ABAP 6.40 SR1".
thanks,
Keishi

Hi Keishi,
As a good and ideal practice the answer to your first question Q1 is yes. Infact I would say that in case you are using ALE then it is must
For Q2 there has to be an additional step which is most important one. Running BDLS transaction which would allow you to change logical systems in relevant tables from the one of source system to target system.
For Q3 the answer is agaain yes and you can have two approaches>
1. manually recreate all the RFC destinations after sys. copy.
2. Export all the RFC destination data relevant tables before system copy and then reimport them after sys. copy.
Regards.
Ruchit.

SRMO - Cannot delete Index Category after System Copy

Hi,
I am trying to delete incorrect Index Categories using t-code SRMO after a system copy (restore db from backup) from our production system to our sandbox system.
When I select the Index Category and click on the "Delete Category" button I get this message:
Error during deletion of language 'EN'. Search
engine result '3147'
When I click on the Help button I get this:
Error during deletion of language 'EN'. Search engine result '3147'
Message no. SRET148
Diagnosis
When the index category is deleted, all languages, and consequently all physical indices on the search server (RFC server) are deleted.
If a physical index could not be deleted, the index category is not deleted or set to inactive either. This is to prevent the index from staying on the search server without R/3 inforamtion.
Procedure
Firstly clean up all languages / indexes for which this information appears.
Use the function to delete an index without R/3 information (if such an index exists) and / or the function to delete the language without an index from the R/3 System.
You can then call the function 'Delete index category' again.
Any ideas on what function they are talking about in the second to last paragraph: "function to delete an index without r/3 information"?
Thank you,
Neil

I have exactly the same problem, only that the index category still can't be deleted even after I deleted the languages first. I still get the error message '3147'. It says that there was an error deleting the languages. As procedure it is suggested (as before) to first delete the languages and then again the index category. But the languages are no longer displayed in the index category.
Does anybody know how I should proceed in order to delete the old invalid index and to create a new one for indexing with the new TREX?

BW connections in SAP Portals after system copy

Hello,
A system copy was made on BW and R/3 systems (production backups where copied into development environments).
After the copy, the BW reports in SAP Portals no longer execute, message "The requested resource does not exist" is shown. Does any body knows why? Is it possible that an RFC destination is missing?
Regards,
Sónia

Hi Peter
Did you get the solution for this problem?
If yes give the solution.
Regards
Niranjan

ECC6 EHP2 (ABAP+Java) system copy using file system copy

Hello Experts,
I have a question around system copy method for a dual stack ECC6 EHP2 system.
We are planning to take full file system backup of this entire ECC6 EHP2 dual stack system and throw it on a completely new hardware with new host name but same SID. We are also planning to do a host renaming in instance profiles and re-building the control files in target system after we finish the file system restore.
Is this method supported in SAP ? Or we strictly have to use SAPinst to do export and import method. In any case our source and target platform is not going to chance as per our scenario.
Any suggestions will be greatly appreciated.
Thanks,
Harshal

> Thanks for the quick response. Is their any document that says it is not supported ? Because of no proper document that says no to do it, client want's to try it out.
For the ABAP part this is certainly feasible.
The Java part has not only issues with the secure store but also with SID and hostname. The old values are stored in many places in the database and in, depending on the applications installed, many .properties files in the filesystem. So it would be not enough to somehow regenerate the secure store but also change hostname and SID in different places that are not really all documented.
What you are basically looking for is
Note 757692 - Changing the hostname for J2EE Engine 6.40/7.0 installation
with the significant sentence
This note should be applied only when the hostname of a machine
where the j2ee engine was already installed has changed.
It does not replace the SAP official system copy procedure and
MUST NOT be used for copying of an instance to another host and/or with different SID.
Markus

J2EE Cluster is not created during system copy.

Hi all,
Iu2019ve been trying to perform a system copy on our PI 7.0 sp14 test system & create a second system on the same server.
I used the standard Sapinst tools for this because it is a PI ABAP+JAVA system.
The copy process went smooth but after it finished I realized that the ABAP side has been installed correctly but when I tried running "SXMB_IFR" I saw that the system points me to the source system J2EE process.
Looking into the file system of the target system, I saw that under the path \usr\sap\<SID>\<Instance>\j2ee\cluster only the bootstrap folder exists. Of course that in the SAP MMC, you cannot see any J2EE process under the new system process list.
I tried using a newer sapinst but that didnu2019t help.
Anyone ever encounter anything like that?
Thanks for your help.
Regards,
Yoav Zilberman

He again,
Now i finally managed to make all the J2EE process work but i keep having issues with the "server0" process in both systems on the server.
the first system i starts works fine but the second one will get the error: [Thr 8944] JStartupICheckFrameworkPackage: can't find framework package E:\usr\sap\XIQ\DVEBMGS00\exe\jvmx.jar ; (SID changes according to which system started first).
Thanks,
Yoav

After system copy new system size is leeer than old system

Similar Messages

Maybe you are looking for