AFTER TAKING 60 PHOTOS ON MY T3I I SHUT IT OF AND PUT IT ASIDE. WHEN I TURNED IT BACK ONI GOT A ERRO
AFTER TAKING 60 PHOTOS ON MY T31,I SHUT IT OF AND PUT IT ASIDE.WHEN I TURNED IT BACK ON I GOT AN ERROR MESSAGE THAT SAID IT COULD NOT READ THE CARD AND TO TRY TAKING THE CARD OUT AND PUTTING IT BACK IN .THAT DIDNT WORK AND DID NOT HAVE ANOTHER CARD YET SO I REFOMATTED IT CARD AND OF COURCE LOST ALL MY PHOTOS.I HAVE A 8 G CARD SO IT WASNT FULL.WHAT MIGHT HAVE HAPPENED?
LLATTARULO,
There was likely corrupted data or incomplete data on the card. There are a couple possible causes, but since it has been resolved, it is hard to speculate what caused it. It may have been that the card had not been formatted in a long time or the camera had not finished writing the data from earlier to the card.
This error does not always mean that the images on the card are lost. Formatting can fix this, but you may want to try downloading the images from the card directly using a card reader before you format the card if this happens again. This will ensure you do not lose your images again.
It is also good practice to regularly format the card after you have downloaded all of the images from it. This keeps the card fresh and the file system as free from corruption as possible, greatly reducing the chances of seeing this error again.
If this is a time sensitive-matter, additional support options are available at Contact Us.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.
Similar Messages
-
Camera problem: after taking a photo the camera turns itself off ...
After taking the photo the camera turns itself off and the screen goes blank. I guessed the camera roll was full so moved photos and deleted from the phone. Same problem continues ... can you offer any help? Thanks.
it seems to happen more when idle also if thats any help
-
Exception occurs after taking several photos
My application crashes after taking several photos ( always about 5-8 times), the output information in console listed here:
2008-10-07 20:04:09.999 Schmapper[1325:20b] * -[NSConcreteMutableData count]: unrecognized selector sent to instance 0x167cb0
2008-10-07 20:04:10.031 Schmapper[1325:20b] * Terminating app due to uncaught exception 'NSInvalidArgumentException', reason: '* -[NSConcreteMutableData count]: unrecognized selector sent to instance 0x167cb0'
2008-10-07 20:04:10.060 Schmapper[1325:20b] Stack: (
808163835,
806099672,
808167517,
807899933,
807794784,
33587,
817892368,
817893624,
816439824,
816461524,
816482588,
24311,
44341,
816680684,
43269,
816688420,
816674244,
816675100,
33253,
817958924,
821010112,
821004660,
820904572,
820999608,
807795273,
812083835,
807779567,
807777675,
829004012,
816177936,
816214500,
10589,
8244
terminate called after throwing an instance of 'NSException'
I use @try block in the 'didFinishPickingImage' delegate method, but it won't goes into the exception handler, instead crashing directly. does anybody meet the same problem? how should I do to fix it?thanks Rogalon,
yes it did receive memory warning , and only call the method of super class like
- (void)didReceiveMemoryWarning {
[super didReceiveMemoryWarning]; // Releases the view if it doesn't have a superview
// Release anything that's not essential, such as cached data
after picking the photo, I save the image data to a temporary file and release the UIImagePickerController object. and I did check memory allocation with instruments, there is no memory leaks.
today I found that because of the UIWebView, the problem won't appear so frequently if I disable the UIWebView in the application. If I enable the UIWebView in the application, it will cause the problem above and sometimes exit with status 101. And, there are some memory leaks after enable UIWebView -
After taking a pix with my iPhone, it shows up in my Album. But when I select it to look at it or forward it, it disappears and the screen is blank. This doesn't happen with all of my pictures. I have the camera set on photo, with HDR off. How do I keep this from happening?
Not sure if this helps you, but I had the same issue. I inadvertently must have chosen a filter instead of none. Once I went and fixed this, my pictures were in my roll and I could see them. Hope this helps. I think you should be able to pick a filter and take a picture, but it worked for my phone.
-
I have got two photos by mail from iPhoto. My friend has put descriptions in the description field. The I got the mail I saw the description below each photo. If I check the photos with Preview they have Exif and JFIF fields but no IPTC field.
Does you friend use any accented letters in the descriptions? That might cause it but I don't know for sure.
Has he run any repair operations on his library, i.e. repairing the database file? Another possible fixe that's easy to apply is the following:
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
Home/Library/ Preferences folder.
2 - delete iPhoto's cache folder(s):
Home/Library/Containers/com.apple.iPhoto
and, if there is one, the
Home/Library/Caches/com.apple.iPhoto folder
3 - reboot, launch iPhoto and try again.
NOTE: In Lion and Mountain Lion the Home/Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and press the Return key - 10.7: Un-hide the User Library folder.
For Mavericks, 10.9, go to your Home folder and use the View ➙ Show View Options menu to bring the this window:
The demo version of GraphicConverter can be used to view/check/edit the ITPC fields in an image file after exporting. -
After changing my 1st cartridge Envy 5530 printer wants to realign and scan each time it's turned on
After changing my 1st cartridge Envy 5530 printer wants to realign and scan each time it's turned on. When I do this, it says "Scan not detcted." After a 2nd scan, it sets itself to default settings. Then I can use the printer. Is there a way to turn off alignment?
This question was solved.
View Solution.You might try resetting the printer. It could clear your issue.
Steps
Press the Power button () to turn on the product.
With the product turned on, disconnect the power cord from the rear of the product.
Unplug the power cord from the wall outlet.
Wait at least 15 seconds.
Plug the power cord back into the wall outlet.
Reconnect the power cord to the rear of the product.
If the product does not turn on by itself, press the Power button () to turn it on.
Hope that this helps.
---- If my answer was helpful please click the Kudos star.
If your problem is solved please click the Accept as Solution button so other forum users can use the solution.---->
(I am an HP employee) I am not a expert on all our products, but I'll do my best to help you. -
my ipod 5th gen crashed unexpectedly while i was using my facebook app and then i turned it off thinking it would restart and be alright but when i turned it on like ***?! some of the applications were gone and the setting and appstore and photos and camera are gone like everything that is on it already .. please help me
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
I have been working on an iMovie project. I turned off my computer and when I turned it back on to continue working and entire section of about 80 photos was gone. The music attached to these photos remains. Can I retrieve this work?
I am at Snow Leopard and have only played a bit in IMOVIE - so can't speak for Mavericks - but -
In general as I work a lot in Photoshop - when you are happy with something save it and continue on - If you have Time Machine Running and you want to try things next that may or may not work - force a time machine backup - that way the version you are happy with will be available for 24 hours (and wish this was a setting one could extend)
If you turn off your mac - or end a program without consciously saving something you may lose what you worked on.
If IMOVIE did not ask if you want to recover what you were doing your update may be gone - but try posting new question - asking about automatic backups in IMOVIE and how they work. -
Our Ipad type line for text disappears after taking a photo to send and only after a restart
Hello. We have two Ipads and two Iphones. Our newest Ipad has an issue with I message. If we take a photo to send by text the type screen and line disappears. The only way to get it back is to shut the device and then the type line returns. We have turned the message off on on with the same result. Our Ipad 2 and both our 4s and 5 phones don't seem to have the issue. Any thoughts? We are also did the icloud update and no change happened. Is this a bug or are we missing something? Messaging works fine until we take a picture then the type bar and keyboard disappear. The taken photo goes to photos.. The only way to get messages to work is to shut off the device and then it works until we try to add another new picture. It seems to work if we use an existing photo from the library.
This sounds like you may have the camera's "Image Review" option set to "hold".
When you take a photo, two things normally happen.
1) The camera should write the image to your memory card. You'll know when it's writing to your memeory card because there is a red LED ligth which is active when the camera is using the card. When the light goes out, the camera is finished.
2) The camera can be set to do "Image Review". By default, when you take an exposure, the camera will display the image on the rear screen for just a few seconds. But this behavior can be customized.
Your choices for image review are "Off", 2 seconds, 4 seconds, 8 seconds, or "Hold". If Off is selected you wont get any image review. If "Hold" is selected, the image you just took will appear on the rear LCD and will never go away until you manually clear it. You can just do a half-press of the shutter button to clear it (it wont get in the way of you taking more shots... just ignore it.)
You can find instructions on this on page 166 of your T3i Instruction Manual which describes how to change this setting.
Tim Campbell
5D II, 5D III, 60Da -
IOS 5.0.1 on 3GS Crashing-Restarting sometimes after taking a photo and verry slow
Hello,
My Iphone 3Gs is crashing and restarting sometimes after taking a picture. This is not always but verry often.
The Iphone is also verry slow since IOS 5 , a big fault from Apple is that they have not put a warning when update a 3GS to IOS 5 that is will be almost unusable.
When pressing on the small button on top of the iphone , it takes sometimes more than 10 seconds until the phone is locked. I hear the click when it is already in my pocket.
also the same when ending or stating a call it is so slow that sometime i am calling to somebody else in my list.
Is there a solution to put it back to the latest 4.3 version ?
Thanks
Best regards
DidierI had the same problem with my 3Gs - rebooting every two minutes or so, but only when plugged into the charger. Eventually, I remembered that I had taken a couple of photos with the phone.
So, I deleted the photos from the phone and the problem vanished.
Must be something to do with incompatability with the older camera systems. -
My phone is running 6.0.1. I took one photo from the lock screen by sliding up the camera button. It was a little blurry so I tried again and the iphone 4ssaid it couldn't because the phone was out of space.
After shutting the phone off and turning it back, put in the passcode and checked my photos and they were all gone. my usage says I only have 150kb left on the 16gb phone it says zero photos and zero videos. I only have 10 applications and 606 songs. It seems the photos are still on the device as the space is being used but i cant access them. Any idea or suggestions will help. ThanksI i backup from current state would it not backup without the photos. Maybe I should just restore from the last backup posible and this should have all photos until then. But before i restore from backup I wish i could just access the photos. I don't understand in the first place how they all deleted, and secondly why iphone still recognizes the space being used. This is such a glitch, which is very frustrating. i wish someone at apple can give me more insight....
-
My phone is running 6.0.1. I took one photo from the lock screen by sliding up the camera button. It was a little blurry so I tried again and the iphone 4s said it couldn't because the phone was out of space.
After shutting the phone off and turning it back, put in the passcode and checked my photos and they were all gone. Usage says I only have 150mb left on the 16gb phone it says zero photos and zero videos. I only have 10 applications and 606 songs. It seems the photos are still on the device as the space is being used but i cant access them. Is very puzzleing...Where did they go and can I recover them? Any idea or suggestions will help. ThanksI i backup from current state would it not backup without the photos. Maybe I should just restore from the last backup posible and this should have all photos until then. But before i restore from backup I wish i could just access the photos. I don't understand in the first place how they all deleted, and secondly why iphone still recognizes the space being used. This is such a glitch, which is very frustrating. i wish someone at apple can give me more insight....
-
New iPad 3 locks up after taking a photo
1 week old new 3 is locking up after trying to take a photo with standard camera icon that comes with iPad? Any tips? Have turned it off a couple of times no difference. Have about ten photos in gallery but each time we take a photo now iPad locks up and doesn't retain last picture taken. Other photo apps same thing happens.
mThank you both for your swift replies. Had just turned back on again and backed up. I couldn't find restore only reset. Thought I would then try camera before resetting and seemed to be operating again.
Thanks again
m -
I uploaded two albums and put them on my boyfriends ipod it asked for me to upgrade his ipod and i did, them after when I checked to see if the albums had loaded they had, but all his other music had dissapeared, how do I get it back there were thousands of pounds worth of music on the ipod, he is not happy and neither am I, I am on windows 7. Please help............................................................
You can redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
For other music you need to get them from where you got them before. -
I am trying to save my pictures on my PC so I can get the iOS7 upgrade. I plugged it in to my computer to do so and my screen is black with the white rolling ball. I can reset after holdign home and off for 45 seconds btu when I turn it on the same thgin. I cannot shut it off. How do I get this tos top so i can move forward?
1) Connect to iTunes on the computer you usually Sync with and Restore
http://support.apple.com/kb/HT1414
2) If necessary Place the Device into Recovery mode...
http://support.apple.com/kb/HT1808
Note on Recovery Mode.
You may need to try this More than Once...
Be sure to Follow ALL the Steps...
Once you have Recovered your Device...
Re-Sync your Content or Restore from the most Recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766
Make sure you have the Latest Version of iTunes (v11) Installed on your computer
iTunes free download from www.itunes.com/download
Maybe you are looking for
-
With JDBC, calling a stored procedure with ARRAY as out parameter
Hi, I want to use the data type ARRAY as an out parameter in an Oracle stored procedure. I want to call the stored procedure from my java program using JDBC. The problem it's i use a 8.1.7 client to acces with oci to a 7.1.3 Database. With this confi
-
Cd rom not working. When I insert a disk the computer ejects it. Mid 2012 macbook pro.
When I insert a disk the computer ejects it. I have reset the smc and re installed mountain lion. Mid 2012 macbook pro
-
945P Neo 2 F Chipset installation CD
I lost my CD and can't install the chipset driver when i reformatted the system. No internet connection at home so can't update my window XP to SP2.... anyone can help? The drivers i tried downloaded from the MSI is for window SP2.....
-
I'm using the value selected in a dropdown list (20 separate values) as the where clause in a query to populate a table: dataElementsTableModel.setObject(1, xactionDropdown.getValue()); dataElementsTableModel.execute(); This works OK for most of the
-
Hello with Firebug it is possible to find the right CSS file and line. I use 'Click an element in the page to inspect' and it shows on the right side CSS and line. OK! What I can not find (until now) is which html file it is. E.g to inspect an image: