Agent Desktop Issue

I've been having some users get logged out of CAD for no reason. Here is the jtapi log of when this happens. Any ideas on what might be causing this???
929: Dec 03 14:42:36.306 CST %JTAPI-PROTOCOL-7-UNK:(P7-10.130.0.12) received Response: com.cisco.cti.protocol.GetLineInfoFetchResponse {
sequenceNumber = 37
info           = 2@[
com.cisco.cti.protocol.LineInfo {
    name             = 4799
    displayName      = Emily *********
    permanentLineID = 1234577583
    maxNumberOfCalls = 4
    lineInstance     = 1
    busyTrigger      = 2
com.cisco.cti.protocol.LineInfo {
    name             = 8799
    displayName      =
    permanentLineID = 1846486595
    maxNumberOfCalls = 2
    lineInstance     = 2
    busyTrigger      = 1
more           = false
2930: Dec 03 14:42:36.306 CST %JTAPI-PROTOCOL-7-UNK:(P7-10.130.0.12) [(P7-10.130.0.12) DeviceLineUpdateThread] sending: com.cisco.cti.protocol.GetLineInfoCloseRequest {
sequenceNumber    = 38
enumerationHandle = 71832
2931: Dec 03 14:42:36.316 CST %JTAPI-PROTOCOL-7-UNK:(P7-10.130.0.12) received Response: com.cisco.cti.protocol.GetLineInfoCloseResponse {
sequenceNumber = 38
2932: Dec 03 14:42:36.316 CST %JTAPI-CTI-7-UNK:(P7-3352) SEP001759C48420(0,0) refreshing lines: previous=2 current=2 created=0 removed=0
2933: Dec 03 14:42:37.943 CST %JTAPI-JTAPI-7-UNK:(P7-3352)[(P7-sa-ccm1) EventThread](P7-3352) Request: removeObserver
2934: Dec 03 14:42:37.943 CST %JTAPI-JTAPI-7-UNK:ProvObservationEndedEv event to com.spanlink.jtapiclient.splkJtapiObj@21d1f4
2935: Dec 03 14:42:37.943 CST %JTAPI-JTAPI-7-UNK:ProvObservationEndedEv [#68]
2936: Dec 03 14:42:37.943 CST %JTAPI-JTAPIIMPL-7-UNK:[com.spanlink.jtapiclient.splkJtapiObj@21d1f4]ObserverProxy.queueEvents: dispatching synchronously
2937: Dec 03 14:42:37.943 CST %JTAPI-JTAPIIMPL-7-UNK:[com.spanlink.jtapiclient.splkJtapiObj@21d1f4]ObserverProxy.deliverEvents()
2938: Dec 03 14:42:37.953 CST %JTAPI-JTAPIIMPL-7-UNK:[com.spanlink.jtapiclient.splkJtapiObj@21d1f4]delivering to providerChangedEvent
2939: Dec 03 14:42:37.953 CST %JTAPI-JTAPIIMPL-7-UNK:[com.spanlink.jtapiclient.splkJtapiObj@21d1f4]ObserverProxy.deliverEvents() completed
2940: Dec 03 14:42:37.953 CST %JTAPI-JTAPI-7-UNK:(P7-3352)[(P7-sa-ccm1) EventThread](P7-3352) Request: shutdown
2941: Dec 03 14:42:37.953 CST %JTAPI-MISC-7-UNK:Provider "(P7-3352)" changing state to SHUTDOWN
2942: Dec 03 14:42:37.953 CST %JTAPI-JTAPI-7-UNK:(P7-3352)[(P7-sa-ccm1) EventThread](P7-3352) Request: getObservers
2943: Dec 03 14:42:37.953 CST %JTAPI-PROTOCOL-7-UNK:(P7-10.130.0.12) [(P7-sa-ccm1) EventThread] sending: com.cisco.cti.protocol.ProviderCloseRequest {
sequenceNumber = 39
2944: Dec 03 14:42:38.154 CST %JTAPI-PROTOCOL-7-UNK:(P7-10.130.0.12) received Response: com.cisco.cti.protocol.ProviderCloseResponse {
sequenceNumber = 39
2945: Dec 03 14:42:38.154 CST %JTAPI-MISC-7-UNK:(P7-10.130.0.12) shutting down
2946: Dec 03 14:42:38.154 CST %JTAPI-MISC-7-UNK:(P7-10.130.0.12) ProviderRetryThread shutting down
2947: Dec 03 14:42:38.154 CST %JTAPI-MISC-7-UNK:(P7-10.130.0.12) ProviderRetryThread exiting
2948: Dec 03 14:42:38.154 CST %JTAPI-MISC-7-UNK:(P7-10.130.0.12) ProviderRetryThread finished shutting down
2949: Dec 03 14:42:38.154 CST %JTAPI-MISC-7-UNK:(P7-10.130.0.12) ReceiveThread: shutting down
2950: Dec 03 14:42:38.154 CST %JTAPI-MISC-7-UNK:(P7-10.130.0.12) ReceiveThread: stream closed
2951: Dec 03 14:42:38.154 CST %JTAPI-MISC-7-UNK:(P7-10.130.0.12) ReceiveThread: exiting
2952: Dec 03 14:42:38.154 CST %JTAPI-MISC-7-UNK:(P7-10.130.0.12) ReceiveThread: notifying handler of demise
2953: Dec 03 14:42:38.154 CST %JTAPI-PROTOCOL-7-UNK:(P7-10.130.0.12) received Event: com.cisco.cti.protocol.ProviderOutOfServiceEvent {
eventSequence                 = 69
PROVIDER_OUT_OF_SERVICE_EVENT = 200
2954: Dec 03 14:42:38.154 CST %JTAPI-MISC-7-UNK:(P7-10.130.0.12) EventThread: queuing com.cisco.cti.protocol.ProviderOutOfServiceEvent
2955: Dec 03 14:42:38.154 CST %JTAPI-MISC-7-UNK:(P7-10.130.0.12) EventThread: shutting down
2956: Dec 03 14:42:38.154 CST %JTAPI-MISC-7-UNK:(P7-10.130.0.12) EventThread: waiting for exit
2957: Dec 03 14:42:38.154 CST %JTAPI-CTIIMPL-7-UNK:(P7-10.130.0.12) EventThread handling event com.cisco.cti.protocol.ProviderOutOfServiceEvent[69]
2958: Dec 03 14:42:38.154 CST %JTAPI-CTIIMPL-7-UNK:(P7-10.130.0.12) deviceMap is empty? -false
2959: Dec 03 14:42:38.154 CST %JTAPI-CTIIMPL-7-UNK:(P7-10.130.0.12) lineMap is empty? -true
2960: Dec 03 14:42:38.154 CST %JTAPI-CTIIMPL-7-UNK:(P7-10.130.0.12) callMap is empty? -true
2961: Dec 03 14:42:38.154 CST %JTAPI-CTIIMPL-7-UNK:(P7-10.130.0.12) clearing park DN map
2962: Dec 03 14:42:38.154 CST %JTAPI-JTAPI-7-UNK:(P7-3352)[(P7-10.130.0.12) EventThread](P7-3352) Request: getCalls
2963: Dec 03 14:42:38.154 CST %JTAPI-MISC-7-UNK:(P7-10.130.0.12) EventThread: exiting
2964: Dec 03 14:42:38.154 CST %JTAPI-MISC-7-UNK:(P7-10.130.0.12) EventThread: finished shutting down
2965: Dec 03 14:42:38.154 CST %JTAPI-MISC-7-UNK:(P7-10.130.0.12) HeartbeatSendThread shutting down
2966: Dec 03 14:42:38.154 CST %JTAPI-MISC-7-UNK:(P7-10.130.0.12) HeartbeatSendThread waiting for exit
2967: Dec 03 14:42:38.154 CST %JTAPI-MISC-7-UNK:(P7-10.130.0.12) HeartbeatSendThread exiting
2968: Dec 03 14:42:38.154 CST %JTAPI-MISC-7-UNK:(P7-10.130.0.12) HeartbeatSendThread finished shutting down
2969: Dec 03 14:42:38.154 CST %JTAPI-MISC-7-UNK:(P7-10.130.0.12) HeartbeatReceiveThread shutting down
2970: Dec 03 14:42:38.154 CST %JTAPI-MISC-7-UNK:(P7-10.130.0.12) HeartbeatReceiveThread waiting for exit
2971: Dec 03 14:42:38.164 CST %JTAPI-MISC-7-UNK:(P7-10.130.0.12) HeartbeatReceiveThread server heartbeat or message not received for 60600 mili-second
2972: Dec 03 14:42:38.164 CST %JTAPI-MISC-7-UNK:(P7-10.130.0.12) HeartbeatReceiveThread exiting
2973: Dec 03 14:42:38.164 CST %JTAPI-MISC-7-UNK:(P7-10.130.0.12) HeartbeatReceiveThread finished shutting down
2974: Dec 03 14:42:38.164 CST %JTAPI-MISC-7-UNK:(P7-10.130.0.12) DeviceLineUpdateThread: shutting down
2975: Dec 03 14:42:38.164 CST %JTAPI-MISC-7-UNK:[com.cisco.cti.util.BlockingQueue@4e8cee]BlockingQueue:take() Threadname=(P7-10.130.0.12) DeviceLineUpdateThread Thread interrupted
2976: Dec 03 14:42:38.164 CST %JTAPI-MISC-7-UNK:(P7-10.130.0.12) DeviceLineUpdateThread: exiting
2977: Dec 03 14:42:38.164 CST %JTAPI-MISC-7-UNK:(P7-10.130.0.12) DeviceLineUpdateThread: waiting for exit
2978: Dec 03 14:42:38.164 CST %JTAPI-MISC-7-UNK:(P7-10.130.0.12) DeviceLineUpdateThread: finished shutting down
2979: Dec 03 14:42:38.164 CST %JTAPI-MISC-7-UNK:(P7-10.130.0.12) ReceiveThread: waiting for exit
2980: Dec 03 14:42:38.164 CST %JTAPI-MISC-7-UNK:(P7-10.130.0.12) ReceiveThread: finished shutting down
2981: Dec 03 14:42:38.164 CST %JTAPI-MISC-7-UNK:(P7-10.130.0.12) finished shutting down
2982: Dec 03 14:42:38.164 CST %JTAPI-JTAPI-7-UNK:(P7-3352)[(P7-sa-ccm1) EventThread][8799]Request: getCallObservers()
2983: Dec 03 14:42:38.164 CST %JTAPI-JTAPIIMPL-7-UNK:[com.spanlink.jtapiclient.splkJtapiObj@21d1f4]ObserverProxy.deliverEvents() completed
2984: Dec 03 14:42:38.164 CST %JTAPI-CTI-7-UNK:(P7-3352) DeviceMap: closing device "SEP001759C48420"
2985: Dec 03 14:42:38.164 CST %JTAPI-JTAPIIMPL-7-UNK:(P7-3352) Terminal "SEP001759C48420" out of service
2986: Dec 03 14:42:38.164 CST %JTAPI-JTAPI-7-UNK:(P7-3352) [SEP001759C48420] CiscoTermOutOfServiceEv [#69]
2987: Dec 03 14:42:38.164 CST %JTAPI-CTIIMPL-7-UNK:(P7-10.130.0.12) deviceMap is empty? -false
2988: Dec 03 14:42:38.164 CST %JTAPI-CTIIMPL-7-UNK:(P7-10.130.0.12) lineMap is empty? -true
2989: Dec 03 14:42:38.164 CST %JTAPI-CTIIMPL-7-UNK:(P7-10.130.0.12) callMap is empty? -true
2990: Dec 03 14:42:38.164 CST %JTAPI-CTIIMPL-7-UNK:(P7-10.130.0.12) clearing park DN map
2991: Dec 03 14:42:38.164 CST %JTAPI-JTAPI-7-UNK:(P7-3352)[(P7-sa-ccm1) EventThread](P7-3352) Request: getCalls
2992: Dec 03 14:42:38.164 CST %JTAPI-MISC-7-UNK:(P7-sa-ccm1) EventThread: exiting

Forgot to mention that we have already tried that, as well as many other things on the user's end. Here is a list of everything we have done on the user's end.
Uninstall and reinstall Cisco Agent Desktop - Been done numerous time
A complete format of the hard drive and a reinstall of Windows and CAD - Been done 2 times
Swapped out hard drive and put into different laptop, no difference
Uninstalled all security software, made no difference
Upgraded all Windows drivers
Had user work on wireless connection instead of wired
Tried a couple different phones
After trying all this it is hard to believe that this problem stems from the user's end. Is there anything on the server end that might cause this? And if so where is the first place to look?

Similar Messages

Windows 7 64 bit Cisco agent desktop issue

Hello,
We are upgrading to Windows 7 64 bit, we have UCCE 8.0 as our call center. We done some testing and notice CTIOS agent desktop 8.0 doesnt work and then we tried CTIOS agent 8.5(4) which works to a certaion point the application opens but just says connecting to CTIOS server and says offline. Keep in mind we have Windows 7 32 bit and CTIOS agent desktop 8.0 works with that.
Please help
Thanks.

Senthil, Horacio,
I would not recommend using a 8.5(x) client against a 8.0(x) server (the OP suggests UCCE 8.0 is used). Even though they _should_ be compatible, they usually are not.
Upgrading the server side to 8.5 is the way to go IMHO.
G.

CTIOS agent desktop issue

Im trying to install an IPCC Lab. when i try to connect my ctios client (Windows 7) to ctios OS server.....it shows offline and disconnected state..
these messages are seen on the ctisvr process
Trace: CTIApplication::ProcessOpenRequest from sessionID 1 (CTIOSServer) - ACCEPTED (0 ms)
Trace: ProcessConfigRequestKeyEventMSG - sessionID 1
Trace: ProcessConfigRequestEventMSG - sessionID 1
Trace: CTIApplication::ProcessClientEventReportRequest - sessionID 1
Trace: CTIApplication::ProcessClientEventReportRequest - CTIOS_NUM_CLIENT:0
PG System Event: Peripheral Online (PeripheralID 5001), PG Status: NORMAL
Trace: CTIApplication::ProcessTimeNotificationEvent - Time=05:05:00 UTC NewHalfHour=FALSE
Trace: CTIApplication::ProcessClientEventReportRequest - sessionID 1
Trace: CTIApplication::ProcessClientEventReportRequest - CTIOS_NUM_CLIENT:1
Trace: CTIApplication::ProcessClientEventReportRequest - sessionID 1
Trace: CTIApplication::ProcessClientEventReportRequest - CTIOS_NUM_CLIENT:0
Trace: CTIApplication::ProcessClientEventReportRequest - sessionID 1
Trace: CTIApplication::ProcessClientEventReportRequest - CTIOS_NUM_CLIENT:1
Trace: CTIApplication::ProcessClientEventReportRequest - sessionID 1
Trace: CTIApplication::ProcessClientEventReportRequest - CTIOS_NUM_CLIENT:0
Trace: CTIApplication::ProcessClientEventReportRequest - sessionID 1
the underlined messages appear when i run my CTIOS Agent desktop
Can anyone help?
Hassan

What do the CTIOS Agent desktop logs show? Usually you'd need to fill in both CTIOS Server Side A and B host-names/ip-address and ports while installing the agent desktop (same hostnames/ports if it is Simplex) .
If it shows offline it usually means the desktop is unable to reach the server. You can also check to see if there is anything on the PC blocking the packets to the CTIOS server usually antivirus, firewall etc.

Cisco agent desktop - issue

hello, we have an issue with two agents.
when they open chat, all the time "Initializing" state, every 30 seconds, so active state every 30 seconds begins from 0, and new calls arrive to this agent
what is could be?
thank you

Hi,
When using CAD Chat window, I cannot see any other agent, although some are logged.
I tried the following "telnet" commands :
From agent to Chat server:         telnet 59000 ===> This works fine !
From Chat server to agent:         telnet 59020 ====> Doesn't work
From Agent to Agent :               telnet 127.0.0.1 59020                      ====> Doesn't work
From Agent to Agent :               telnet 59020 ====> Doesn't work
This seems like the listening port is not configured properly, but I don't where to check/define it ?
Do you have any idea on this ?
Thanks in advance,
Regards,
Romuald Grosse.

Cisco Agent Desktop / Supervisor Desktop Issue with Full Disk Encryption

Has anyone had any issues related to running Cisco Agent Desktop or Cisco Supervisor Desktop on a machine running full disk encryption? Our desktop team installed full disk encryption software from Check Point, and it seams to be causing some issues with call monitoring, screen pops via workflow and connectivity to the UCCX server. It's not effecting every machine (that we know of), but the fix for us right now is to provide a desktop without the encryption software. I'm just wondering if this is related to us, or if there is any supporting documentation out there?
Any help is apprecicated.

CAD for IPCCX v4 does not support windows 7. See compatibility matrix:
http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/crs/express_compatibility/matrix/crscomtx.pdf
In my experience if you already have CAD installed and you upgrade the OS (without a fresh rebuild) CAD will work - but it is NOT supported. You should test this though.
You will not be able to install the older version of CAD on windows 7, the installer will give you errors.
Brian
please rate helpful posts

CTI Toolkit Agent Desktop 7.5(1) has stopped working

Dear Support,
We have an IP Telephony setup with Call centre Enterprise.
The CTIOS crashes on the Windows 7 64bit OS.
CTIOS version : 7.5.1
Whenever we run the Agent desktop application, the below error message is displayed.
Also we have tried reinstalling the application and also tried running on compatibility mode as well, and it still did not solve the issue.
Thanks in advance
Nithin Louis.

Hi,
I found that the CTIOS 7.5.1 is not compactable with Windows 7 64 bit .
you can access the CTI OS Client on Windows 7 64-bit Starting with CTI OS Release 8.5(2).
For this you have to install the 8.0(1a) installer is required.
I am able to download the 8.5(2) from the Cisco site but 8.0(1a) is not available.
Could you please share the link for download the 8.0(1a).
Regards
Nithin Louis.

CTIOS AGENT DESKTOP ERROR

Hi,
We are receiving the error "calls has failed because resources not availble.Please wait a moment and
try again" in the agent desktop as CTI warnings.
How to solve this issue.
Regards
krishna.

Would you please be kind to share the solution, if it was found?
Got same trouble. The initial call is received, then when you try to transfer it to ICM script (sometimes it works), the source IP communicator hangs up and the destination agent receives this CAD message.
So, callflow is:
1. Customer from PSTN to ICM Script -> Agent 1
2. Agent 1 -> ICM Script -> Agent 2 (here we got a 80% chance to receive this message on Agent 2 screen, and a "zombie" softphone process on Agent 1)
3. Customer -> Agent 2 (if succeeded).
Happens only with two ICM scripts.

UCCX and agent desktop +E.164

Hello - we are running 10.0 UCCX and looking to see if +E.164 is supported. The issue we have with this is that with agent desktop it does not allow the + sign in the extension field. IS there a work around for this?

Hi Ed,
Use of E.164 DN on agent devices requires Finesse. E.164 is not supported with CAD / IPPA.
HTH
Manish

Passing "Caller Entered Digits" to CTIOS Agent Desktop through IVR.

Hi,
Please suggest me on the below issue-
I need to Customize CTIOS Agent Desktop for the Screen POP-UP, where is Customer ID and Customer Address etc should be populated in CTIOS Agent Desktop. I have created the tabs for these (i.e. Customer ID and Customer Address), Now I need to send values(Customer ID) from IVR to CTIOS Agent Desktop, so that it can populate on Agent Desktop.
Please let me know to achive this.
Thanks in advance.
Thanks,
Manish Gupta.

Use the Call.PeripheralVariableX (X could equal 1-10). The call leaves the IVR and you pass the CED to ICM, ICM looks at this CED and puts it in a peripheral variable (PV for short). These 10 PVs are past on to the desktop once a call is received, they are part of the call context and travel with the call.
david

Error Logging into Cisco Agent Desktop whilst using Cisco IP Communicator

Hi there,
I am having an issue whilst using Cisco Agent Desktop Version 7.0. If I use a cisco IP Communicator ( softphone) i get following message, "Login failed due to a configuration error. Please ask you system administrator to associate your phone with the RM JTAPI Provider user ID according to the instructions in the admin guide".
If user logs in to a normal Cisco phone then logs into agent there are no problems.
Bit of a novice so your help would be appreciated.

Hi
In your AppAdmin pages on UCCX, in the Unified CM Configuration screen, there is an 'RM' user defined.
This will be a user in CCMAdmin 'Application Users', which has all your CCX phones associated to it. UCCX uses this to CTI control the handsets... you need to associate the CIPC phone to that user.
Regards
Aaron
Please rate helpful posts...

Cisco Agent Desktop software running multiple times in Task Manager

Has anyone seen an issue with Cisco Agent Desktop v 6.6(1) where after closing the program completely it stays running in Windows Task Manager. We have the Agent software installed on 8 PCs and only one of them is having this happen to them. One time the PC had 15 instances of Agent.exe running in Task manager. A reboot of the PC corrected the issue, however when the issue does happen her chat box within the Agent software shows as Initializing and the agent's name appears and reappears on the Supervisor Desktop software.
If anyone needs any other info as to the versions we're using or anything else please let me know. I have searched all over the net for a solution and haven't found anything. My next step is to do a TAC case, but I wanted to post something here to see what responses I got.
Thanks,
Nick

Hi Nick,
Check this bug:
http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCtd75811
Multiple Agent.exe Instances Created Causing CAD Agent to Disappear.
Regards
Gurpreet

Agent Desktop Error when CCM1 server fails..

hi,
I have configured IPCCX in HA environment.. so there are two CCM servers (CCM1 and CCM2) and two IPCCX servers (IPCCX1 and IPCCX2)..i have configured extension mobility service in redundant mode...I also associated the phone with RM JTAPI provider.. every thing works fine when both ccm servers are up, means agent are able to login to both phone and the agent desktop.. but when i remove the network cable of CCM1. the phone successfully login (after some delay).. but agent desktop gives the following error..
"Login failed due to configuration error.. please ask your system administrator to associate your phone with the rmjtapi provider user id according to the instruction in the administrator guide"
Even though i have associated the RM CM Jtapi provider with the phone... this situation only occurs when i down the ccm1 server.. if both servers are up every thing works fine.... any idea about it...
Regards
Naresh Rathore

hi,
i added the ip addresses of the cucm server with the hostnames in ipccx servers on the following location and it resolved the issue.
c:\winnt\system32\drivers\etc
i entered the ip of ccm and ipccx with host names in the "host" and "lmhost" files...
Regards

Agent desktop changing dial number as entered

In the agent desktop there is a checkbox, "dial number as entered" that I want to be checked when the application is started. How do I do this?

3 years later I'm running UCCX 8.5(1)SU2 with CAD 8.5.1.214 and have the same issue. Did you ever get a solution or workaround?
Without putting a checkmark in "Dial Number as Entered" I enter a 5-digit extension I get in bottom left corner "Call Failed: Invalid Destination", if I put the checkmark in I can 5 digit dial.

CTIOS 7.5 Agent Desktop

If the agent desktop is minimized when a call is offered to an agent the ctios agent desktop pops up.
Is there a way to turn that feature off so it always stays minimized unless manually brought up?

Thanks that was helpful but will not solve my issue. Your recommendation changes it for every agent. I only want to affect individual agents.
Thanks for you suggestion though!
Del

UCCX numbers off on Agent desktop and CTIOS supervisor desktop

Hello,
We have a big problem with the numbers displaying on are agent desktops as well as as the CTIOS supervisor desktops the numbers are off, such as the number of call recieved at the end of the day, etc. It seems like at certain times of the day the numbers reset back to zero and the number of calls received by an agent through the whole day are smaller than they should. Can you please help us.
Thanks.

Thanks. So you are looking at real-time reports.
1. Is this an issue with all agents or only few ?
2. What OS they are running ?
3. Try installing CAD on Win XP or Win 7 32-bit to see if the behavior is same ? I wouldnt recommend reinstalling CAD on their existing boxes, as few registry settings might not be removed completely & will show the same behavior. Therefore, grab a new machine with above mentioned OS & do a fresh install on it to see if it helps.
4. Were there any OS patch upgrades taken place recently on agent machines ?
GP.

Agent Desktop Issue

Similar Messages

Maybe you are looking for