AIR 3.7 - Debug version not working on test device

Hi there,
yesterday we updated the AIR version to 3.7.
If the app isn't connected to the PC , the debug version of the app won't start on the test device (Samsung Galaxy SII).
Is this intended?
Best
omi

Thanks for the reply. Basically, because of a bug it's showing up a black screen instead of the dialog. If you want to launch the debug app and you're not doing debugging, then please use the following workarounds.
1. Select wifi debugging option (when packaging from Flash Builder, even if you don’t have a wifi, because anyway you don’t want to debug it, you just want to install/launch it on the device)
2. Export a Release APK from Flash Builder.
and if you're on command line.
1. Package apk/apk-captive-runtime
2. Package apk-debug without –listen switch
Thanks once again for reporting, we have an internal already logged for this, which is under investigation at the moment.
-Pahup

Similar Messages

Air Traffic Control Widget Does Not Work With OS 10.6.8

Air Traffic Control Widget Does Not Work With OS 10.6.8.
Any suggestions?
SR

No I have not. I have thought about just downloading another version...
Thanks for your reply.
SR

Debugging is not working in R/3 from WebDynpro-ABAP developed webpage input

Dear Friends,
We are facing a serious problem for debugging. Expecting valuable input for the same.
Debugging is not working in R/3 from WebDynpro-ABAP developed webpage input in Production Server.
The debugging (for WebDynpro-ABAP application) is working in Dev. Server for
1st ] Within R/3
Ex. debug for bapi within R/3. i.e. value enter as input in R/3 only.
2nd ] From webpage to R/3
Ex. Some input given on the internet web page developed through WebDynpro and external breakpoint set in R/3 it works. It directs to R/3 code through debugging.
In Prod. Server the 1st case above is working but the 2nd case is not working.
In Prod. Server the WebDynpro developed applications are running successfully through internet explorer webpage inputs. So running the application is not a problem in prod. Server but debugging of the same is the problem.
The setting which are done in Prod. server are,
1] RZ10 in parameters are set for port and host name.
2.1] In SMICM check for ICM.
2.2] Host file updated in Windows-System 32.
3] In SICF following services are active,
3.1] default_host/sap/bc/webdynpro
3.2] default_host/sap/public/bc
3.3] default_host/sap/public/bc/webdynpro/viewdesigner
3.4] default_host/sap/bc/wdvd
3.5] default_host/sap/public/icman
3.6] default_host/sap/bc/gui/sap/its/webgui
3.7] default_host/sap/public/ping
3.8] default_host/sap/bc/error
3.9] default_host/sap/bc/echo
4] In SE80
4.1] Internet services-System-are published
4.2] Internet services-WEBGUI-are published
4.3] Utilities-Setting-ABAP Editor-Debugging-Username & New Debugger set.
4.4] Utilities-Setting-ABAP Editor-Editor-Front-End Editor(New) set.
5] In Su01 for user profiles sap_all & sap_new is assigned and role SAP_BC_WEBSERVICE_DEBUGGER is assigned.
6] The support packages are also updated to latest level.
7] Gone through following links but not getting any clues.
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/48/74d50bd1431b5ae10000000a42189c/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/EN/77/3545415ea6f523e10000000a155106/frameset.htm
Thanks in Advance.
Best Regards,
Abhijit.

No cross posting
Read the "Rules of Engagament"
Regards
Juan

Mark debug 'sometimes' not working

I find mark debug sometimes not working.In my new project ,I add mark debug = true, then set up the debug nets.I can't find them in the assigned nets ,but from the netlists I find some of them.The missing nets are wire type,notregister type.Does the command not work on wire type nets?
Because my project is very large, searching for the nets requires a very long time.So I hope Xilinx can fix this bug.

Rather than open another thread, I'll extend this one since I'm having what I think is the same problem.
I'm using Vivado 2014.4. "Flatten" is set to "None". The nets are set in the elaborated design with MARK_DEBUG and DONT_TOUCH. But when synthesis gets done with them, the names are completely different.
I don't care if the "equivalent" nets are still there. I need the names. Every time synthesis runs, it's a crapshoot whether the names will change. Particularly bad are 500+ bit buses that get exploded into individual signals. I don't have the time to regather them into the proper buses every time.
In general, I've been pleased with the changes in Viviado. But I can't believe how badly a wonderful tool like ChipScope has been screwed up.

Versioning not working system-wide: How do i fix this?

Versioning not working system-wide.
I am currently unable to restore previous versions in all apps that support versioning (pages, textedit, preview...etc).
I'm running Lion 10.7.5 with all updates installed on a brand new 15in MacBook Pro.
Pls help! I am open to all helpful ideas.

Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

MacBook Air wifi internet shared network not working on tethered android phone GT B5122

MacBook Air wifi internet shared network not working on tethered android phone GT B5122
I have created a password protected wifi internet network on my Macbook air. I tethered by Andriod phone onto this network, but the internet connection works intermittently on the phone, and when it stops working the network continues to show as connected to the shared network mostly(other times it keeps renewing the wifi IP address on the Andriod phone).
Also the network the MBA is connected to, is a hardwired one using a SSH login account in a student accomadations.
I am not sure, but all the restarting and refreshing of system, phone and wifi sharing and re-enabling wifi is not reparing the internet connecting on the wifi network for the phone
Really puzzled, if this is one of the Apple, Andriod compatability issues.
Cheers,
Vivek

Spanners91 wrote:
Hi.
I'm having trouble with the wireless connection on my new home hub 3. Most devices will connect easily, but there are three devices that have trouble connecting. These are an Android Phone (Samsung Galaxy Mini), an android tablet (Sony Tablet S) and an iPod. All of these devices work perfectly on other network connections, and other devices in the house are quite happy connecting to the network.
The Androids can see the network, and will try to connect to it, but when they do they just go through a loop of "connecting">>"acquiring IP address">>"disconnected". I have tried resetting the Home Hub with a pin, and that lets the devices connect for about 24 hours, but after that time they stop connecting again.
I'm really not sure what to do to fix the problem, so I will very much appreciate some help.
Many Thanks.
My lads SGMini connects perfectly to our hub3
Have you installed the BTFon app to these devices?
If so, you could delete it and then see what hapens.....
-+-No longer a forum member-+-

SCCM 2012: F8 debug widow not working (At-least not visible) after entering into the "Currently installed Windows 7 Image": F8 works in winPE

F8 debug widow not working (At-least not visible) after entering into the "Currently installed Windows 7 Image"
F8 option turned on in the boot image.
F8 debug window works in Windows PE.
F8 debug window does not show-up on F8 key-press after entering the 'Currently installed Windows 7 Image" all the way to the end of the task sequence.
But after a 'Restart Step' (and if F8 was pressed) the Task Sequence tends to pause indefinitely as if the
F8 debug screen is open in the background.
I am using SCCM 2012 SP1 (CU 1 is
not an option at the moment).
Any ideas as to how I could get the debug F8 option back?

There have been a couple reported occurrences of this (or something similar) to my knowledge with no resolution in the forums. Your best bet may be to open a case with CSS.
Also note that if you were going to do a CU, why would you pick CU1 instead of CU4? And, can I ask why it's not an option out of curiosity?
Jason | http://blog.configmgrftw.com

I have a macbook air 13 inch, facetime is not working. i receive calls but its dosent connect. can someone please help?

i have a macbook air 13 inch, facetime is not working. i receive calls but its dosen't connect. i have already tried resetting it.i am running on 10.7.5.can someone please help?

I've checked this page over and over - I'm completely updated and I can answer the call on my ipad and iphone, just not my macbook air - any other suggestions? thanks in advance

Air Stream 1200 USB modem not work in yosemite

my Air Stream 1200 USB modem not work in yosemite but it work in Windows pc.

May be there is an update available. Contact Air Stream.

HTML5 output is not working on mobile devices, including iPads and iPhones

Hello,
I posted a question about this last week but had no reply. So I'm posting it again as it presents a serious problem for anyone wanting to publish content to mobile devices from Captivate 6.
The problem is that HTML5 quiz content runs incrediably slowly (it at all) and crashes the brower on mobile devices. I have tested this on an iPhone and 2 iPads in 2 different locations.
This is a demo that shows the problems: http://sshls-dev.port.ac.uk/captivate_problems/
(Running this demo on a standard laptop / PC will be fine and it will work perfectly. The problem only appears when the content is viewed on a mobile device).
The problem is more extreem in the 'shorthand' demo. The quiz loads up the first question and then when I press submit it either freezes or closes the browser (Safari) completly. Occasionally it will progress to questions 2 or 3 but then the same happens.
I am keen on finding an answer / workaround becuase at the moment it effectively means that Captivate cannot be used to display quizes on phones / iPads.
I would be very grateful if anyone knows how to solve this problem to let me know.
thanks,
Emily

Hi alex,
Try it with any type of android system.
regards
ferry
Op 22 feb. 2013, om 09:56 heeft Alex Pavelescu <[email protected]> het volgende geschreven:
Re: BC menu not working on mobile devices
created by Alex Pavelescu in Content Management and Modules - View the full discussion
Hi Ferry,
Just tested on an iphone 4 and it works fine. Please provide details for all the devices on which you have the issue (model type/name, os version, browser version)
Kind Regards,
Alex.
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5093384#5093384
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5093384#5093384
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5093384#5093384. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Content Management and Modules by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

In app purchase is not working in testing environment in sandbox for the past 5 days. Please anyone know about this issue.

in app purchase is not working in testing environment in sandbox for the past 5 days. Please anyone know about this issue.
What i did
1 . Added three products more to the existing in-app
2 . Tested with sanbox
i am getting the error "cannot connect to itunes store" with error code "0" when trying to purchase product in sandbox.
Is sandbox is down?Please help guys..

Apple's sandbox has been down practically all month. You can check the status here:
http://sandbox.itunes.apple.com

HT4623 Why do my iPhone cords for my 5 say it is not certified and may not work with this device? It's the same cord that came with my phone. The only difference is the iOS7 update.

Why do my iPhone cords for my 5 say it is not certified and may not work with this device? It's the same cord that came with my phone. The only difference is the iOS7 update.
Maps took me to the completely wrong side of town for a long standing business in town.

Hello margmcarlson,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
Troubleshooting iPhone, iPad, and iPod touch accessories
http://support.apple.com/kb/TS2634
Restore iPhone, iPad, or iPod touch to its factory default state. You should rarely need to use this step with an accessory issue.
Best of luck,
Mario

SetTimeout() not working on mobile devices

setTimeout() does not work on mobile devices ie. Safari on iOS 7.1.2 and Android 2.2. What is the alternative that works on mobile devices? Thank you.

Hi Carlos,
MS mobile browsers are crippled. They don't support many features known from IE. I would suggest to check MSDN for Windows Mobile documentation:
http://msdn2.microsoft.com/en-us/library/bb158486.aspx
You might also check the blog of IEmobile Team:
http://blogs.msdn.com/iemobile/default.aspx
Best regards,
Klaus

Auto tab focus method is not working in iOS devices please share the ideas why its not working?

Auto tab focus method is not working in iOS devices. Please share the idear i am facing this issue while developing code for devices.

Hi there,
I can confirm this bug.
Not sure if this info is relevant, but this is my experience:
I am on the FIDO network, and so are two other people I know.
We all tried blocking numbers, and calls ring right through. Text messages are blocked successfully. (never tried facetime)
I also tried a ROGERS device running IOS7, and was successfully able to block my phone call from ringing through. HOWEVER, my call was forwarded to their voicemail, I was able to leave a voicemail for the person, and they did get an alert that they had a new voicemail.
I have not yet had a chance to test this on Bell, Telus, or any other carriers.
Spoke to Apple, and they advised me to do a hard reset (hold both buttons to shut off and reboot the phone), and if that fails to do an iOS restore.
I have yet to try this, but hopefully someone will have a better solution.

USB port Working for my Wireless mouse but not working for another Devices like Flash Memory ?, USB port Working for my Wireless mouse but not working for another Devices like Flash Memory ?

USB port Working for my Wireless mouse but not working for another Devices like Flash Memory ? Anyone can help me plz?

Hi, is this a question" Post?
or are you just offering an insight into your Mouse Issue?
Generally and at times we all have little idiosyncrasies appearing with the running of our Macs.
I use the same Logitech BT with my MBP. MB & iBook..(not at the same time) Only ever had one issue
and the cure was to completely Delete the mouse from BT -> Repair Permissions & Reboot then Re Install the BT mouse..Ihave just put a new set of batteries in the Logitech (only 2nd set ever)...L

AIR 3.7 - Debug version not working on test device

Similar Messages

Maybe you are looking for