Airport Printing fails after one job

There seems to be a lot of printing issues with Airport but I can't find a solution for my problem.
I have an Airport Extreme attached to a USB printer.
It will print fine from my Powerbooks running Tiger or Leopard but when I try to print from the new iMac running Snow Leopard it will only print one job and then fail to continue unless I reset the Airport.
All printers work fine via USB.
Any help appreciated

I've got an Airport Extreme Base station.
I've plugged in an USB concentrator on which I have
connected my usb Canon S750 printer and an USB2
HardDrive.
As I don't need this drive all the time, I only power
it when needed.
Everything goes well until I disconnect this Hard
drive.
Eventhough I properly eject it from my iMac desktop
first, whenever I power it off and/or unplug it from
the usb concentrator, the connection to the Airport
Shared printer is lost....
I can't print anymore on it unless I power off then
on the Airport Base Station (or Reset it from Airport
utility).
Has anyone been confronted to this same behavior?
Anyway to solve it?
What USB Hub are you using? Is it a powered Hub?

Similar Messages

  • Can't print more than one job at a time.

    I am trying to print to either a HP DesignJet 1055cm plotter or a HP LaserJet 5000N. I can't send more than one file at a time. If i don't wait until the current job starts printing, the next one won't print. For example if I sent five files one right after the other, I might get 1, 4 and 5. I don't think it's a printer problem because it happens on two different printers, and it doesn't happen when I print from my PC. Any idea what could cause this?

    My work around is to put all the jobs "on hold" in the print settings or just "stop jobs" on the printer window.
    Then I click on each print job in the que and let them print one at a time. This way I can at least quit the program and move onto the next thing.

  • Samsung printer fails after update to CUPS 1.7.5

    On July 31 I updated my system and cups-1.7.4-1-x86_64, cups-filters-1.0.54-1-x86_64 and libcups-1.7.4-1-x86_64 got updated to cups-1.7.5-1-x86_64, cups-filters-1.0.55-1-x86_64 and libcups-1.7.5-1-x86_64, respectively. I just tried to print something, but instead of the page that should be printed, my printer, a Samsung ML-2165, printed:
    INTERNAL ERROR - Incomplete Session by time out
    POSITION: 0x9eee (40686)
    SYSTEM: h6fw_5.53/os_hook
    LINE: 1353
    VERSION: SPL 5.53 07-22-2011
    I'm using the Samsung ML-2160 printer driver, which worked flawlessly until recently (note that in the beginning I had problems printing more than 1 job without resetting the printer, as stated in the comments, but this issue magically went away).
    I decided to set LogLevel to 'debug' and now my /var/log/cups/error_log reads:
    D [04/Aug/2014:17:56:20 +0200] [Job 73] The following messages were recorded from 17:44:25 to 17:56:20
    D [04/Aug/2014:17:56:20 +0200] [Job 73] Unloading...
    D [04/Aug/2014:17:56:20 +0200] [Job 73] Loading attributes...
    D [04/Aug/2014:17:56:20 +0200] [Job 73] Unloading...
    D [04/Aug/2014:17:56:20 +0200] [Job 73] Loading attributes...
    D [04/Aug/2014:17:56:20 +0200] [Job 73] Unloading...
    D [04/Aug/2014:17:56:20 +0200] [Job 73] Loading attributes...
    D [04/Aug/2014:17:56:20 +0200] [Job 73] Job restarted by user.
    D [04/Aug/2014:17:56:20 +0200] [Job 73] time-at-processing=1407167771
    D [04/Aug/2014:17:56:20 +0200] [Job 73] 3 filters for job:
    D [04/Aug/2014:17:56:20 +0200] [Job 73] pdftopdf (application/pdf to application/vnd.cups-pdf, cost 66)
    D [04/Aug/2014:17:56:20 +0200] [Job 73] pdftops (application/vnd.cups-pdf to application/vnd.cups-postscript, cost 100)
    D [04/Aug/2014:17:56:20 +0200] [Job 73] rastertosamsungspl (application/vnd.cups-postscript to printer/Samsung_ML-2160_Series, cost 0)
    D [04/Aug/2014:17:56:20 +0200] [Job 73] job-sheets=none,none
    D [04/Aug/2014:17:56:20 +0200] [Job 73] argv[0]="Samsung_ML-2160_Series"
    D [04/Aug/2014:17:56:20 +0200] [Job 73] argv[1]="73"
    D [04/Aug/2014:17:56:20 +0200] [Job 73] argv[2]="****"
    D [04/Aug/2014:17:56:20 +0200] [Job 73] argv[3]="****straat 4 - Google Maps"
    D [04/Aug/2014:17:56:20 +0200] [Job 73] argv[4]="1"
    D [04/Aug/2014:17:56:20 +0200] [Job 73] argv[5]="EdgeControl=Fine number-up=1 JCLDarkness=NORMAL PageSize=A4 Resolution=600dpi noJCLSkipBlankPages InputSlot=Auto TonerSaveMode=Save MediaType=None job-uuid=urn:uuid:124f4d31-4e75-303a-5dd2-9da2273f0de5 job-originating-host-name=localhost time-at-creation=1407167054 time-at-processing=1407167771"
    D [04/Aug/2014:17:56:20 +0200] [Job 73] argv[6]="/var/spool/cups/d00073-001"
    D [04/Aug/2014:17:56:20 +0200] [Job 73] envp[0]="CUPS_CACHEDIR=/var/cache/cups"
    D [04/Aug/2014:17:56:20 +0200] [Job 73] envp[1]="CUPS_DATADIR=/usr/share/cups"
    D [04/Aug/2014:17:56:20 +0200] [Job 73] envp[2]="CUPS_DOCROOT=/usr/share/cups/doc"
    D [04/Aug/2014:17:56:20 +0200] [Job 73] envp[3]="CUPS_FONTPATH=/usr/share/cups/fonts"
    D [04/Aug/2014:17:56:20 +0200] [Job 73] envp[4]="CUPS_REQUESTROOT=/var/spool/cups"
    D [04/Aug/2014:17:56:20 +0200] [Job 73] envp[5]="CUPS_SERVERBIN=/usr/lib/cups"
    D [04/Aug/2014:17:56:20 +0200] [Job 73] envp[6]="CUPS_SERVERROOT=/etc/cups"
    D [04/Aug/2014:17:56:20 +0200] [Job 73] envp[7]="CUPS_STATEDIR=/run/cups"
    D [04/Aug/2014:17:56:20 +0200] [Job 73] envp[8]="HOME=/var/spool/cups/tmp"
    D [04/Aug/2014:17:56:20 +0200] [Job 73] envp[9]="PATH=/usr/lib/cups/filter:/usr/bin:/usr/bin:/bin:/usr/bin"
    D [04/Aug/2014:17:56:20 +0200] [Job 73] envp[10]="SERVER_ADMIN=root@dc7800"
    D [04/Aug/2014:17:56:20 +0200] [Job 73] envp[11]="SOFTWARE=CUPS/1.7.5"
    D [04/Aug/2014:17:56:20 +0200] [Job 73] envp[12]="TMPDIR=/var/spool/cups/tmp"
    D [04/Aug/2014:17:56:20 +0200] [Job 73] envp[13]="USER=root"
    D [04/Aug/2014:17:56:20 +0200] [Job 73] envp[14]="CUPS_MAX_MESSAGE=2047"
    D [04/Aug/2014:17:56:20 +0200] [Job 73] envp[15]="CUPS_SERVER=/run/cups/cups.sock"
    D [04/Aug/2014:17:56:20 +0200] [Job 73] envp[16]="CUPS_ENCRYPTION=IfRequested"
    D [04/Aug/2014:17:56:20 +0200] [Job 73] envp[17]="IPP_PORT=631"
    D [04/Aug/2014:17:56:20 +0200] [Job 73] envp[18]="CHARSET=utf-8"
    D [04/Aug/2014:17:56:20 +0200] [Job 73] envp[19]="LANG=en_US.UTF-8"
    D [04/Aug/2014:17:56:20 +0200] [Job 73] envp[20]="PPD=/etc/cups/ppd/Samsung_ML-2160_Series.ppd"
    D [04/Aug/2014:17:56:20 +0200] [Job 73] envp[21]="RIP_MAX_CACHE=128m"
    D [04/Aug/2014:17:56:20 +0200] [Job 73] envp[22]="CONTENT_TYPE=application/pdf"
    D [04/Aug/2014:17:56:20 +0200] [Job 73] envp[23]="DEVICE_URI=usb://Samsung/ML-2160%20Series?serial=Z7CYB8GCAA003YK"
    D [04/Aug/2014:17:56:20 +0200] [Job 73] envp[24]="PRINTER_INFO=Samsung ML-2160 Series"
    D [04/Aug/2014:17:56:20 +0200] [Job 73] envp[25]="PRINTER_LOCATION="
    D [04/Aug/2014:17:56:20 +0200] [Job 73] envp[26]="PRINTER=Samsung_ML-2160_Series"
    D [04/Aug/2014:17:56:20 +0200] [Job 73] envp[27]="PRINTER_STATE_REASONS=none"
    D [04/Aug/2014:17:56:20 +0200] [Job 73] envp[28]="CUPS_FILETYPE=document"
    D [04/Aug/2014:17:56:20 +0200] [Job 73] envp[29]="FINAL_CONTENT_TYPE=printer/Samsung_ML-2160_Series"
    D [04/Aug/2014:17:56:20 +0200] [Job 73] envp[30]="AUTH_I****"
    D [04/Aug/2014:17:56:20 +0200] [Job 73] Started filter /usr/lib/cups/filter/pdftopdf (PID 4266)
    D [04/Aug/2014:17:56:20 +0200] [Job 73] Started filter /usr/lib/cups/filter/pdftops (PID 4267)
    D [04/Aug/2014:17:56:20 +0200] [Job 73] Started filter /usr/lib/cups/filter/rastertosamsungspl (PID 4268)
    D [04/Aug/2014:17:56:20 +0200] [Job 73] Started backend /usr/lib/cups/backend/usb (PID 4269)
    D [04/Aug/2014:17:56:20 +0200] [Job 73] Restarted by "root".
    D [04/Aug/2014:17:56:20 +0200] [Job 73] pdftops - copying to temp print file "/var/spool/cups/tmp/010ab53e725fc"
    D [04/Aug/2014:17:56:20 +0200] [Job 73] Loading USB quirks from "/usr/share/cups/usb".
    D [04/Aug/2014:17:56:20 +0200] [Job 73] Loaded 68 quirks.
    D [04/Aug/2014:17:56:20 +0200] [Job 73] Printing on printer with URI: usb://Samsung/ML-2160%20Series?serial=Z7CYB8GCAA003YK
    D [04/Aug/2014:17:56:20 +0200] [Job 73] libusb_get_device_list=11
    D [04/Aug/2014:17:56:20 +0200] [Job 73] STATE: +connecting-to-device
    D [04/Aug/2014:17:56:20 +0200] [Job 73] STATE: -connecting-to-device
    D [04/Aug/2014:17:56:20 +0200] [Job 73] Printer found with device ID: MFG:Samsung;CMD:SPL,FWV,PIC,EXT;MDL:ML-2160 Series;CLS:PRINTER;MODE:SPL5,R0STATUS:BUSY; Device URI: usb://Samsung/ML-2160%20Series?serial=Z7CYB8GCAA003YK
    D [04/Aug/2014:17:56:20 +0200] [Job 73] Device protocol: 2
    D [04/Aug/2014:17:56:20 +0200] [Job 73] Sending data to printer.
    D [04/Aug/2014:17:56:20 +0200] [Job 73] Set job-printer-state-message to "Sending data to printer.", current level=INFO
    D [04/Aug/2014:17:56:20 +0200] [Job 73] Printer make and model: Samsung LaserPrinter
    D [04/Aug/2014:17:56:20 +0200] [Job 73] Running command line for pstops: pstops 73 mk '****straat 4 - Google Maps' 1 'EdgeControl=Fine JCLDarkness=NORMAL PageSize=A4 Resolution=600dpi noJCLSkipBlankPages InputSlot=Auto TonerSaveMode=Save MediaType=None job-uuid=urn:uuid:124f4d31-4e75-303a-5dd2-9da2273f0de5 job-originating-host-name=localhost time-at-creation=1407167054 time-at-processing=1407167771'
    D [04/Aug/2014:17:56:20 +0200] [Job 73] Using image rendering resolution 600 dpi
    D [04/Aug/2014:17:56:20 +0200] [Job 73] Running command line for gs: gs -q -dNOPAUSE -dBATCH -dSAFER -sDEVICE=ps2write -sOUTPUTFILE=%stdout -dLanguageLevel=3 -r600 -dCompressFonts=false -dNoT3CCITT -dNOINTERPOLATE -c 'save pop' -f /var/spool/cups/tmp/010ab53e725fc
    D [04/Aug/2014:17:56:20 +0200] [Job 73] Started filter gs (PID 4275)
    D [04/Aug/2014:17:56:20 +0200] [Job 73] Started filter pstops (PID 4276)
    D [04/Aug/2014:17:56:20 +0200] [Job 73] PID 4266 (/usr/lib/cups/filter/pdftopdf) exited with no errors.
    D [04/Aug/2014:17:56:20 +0200] [Job 73] Page = 595x842; 12,12 to 582,830
    D [04/Aug/2014:17:56:20 +0200] [Job 73] slow_collate=0, slow_duplex=0, slow_order=0
    D [04/Aug/2014:17:56:20 +0200] [Job 73] Before copy_comments - %!PS-Adobe-3.0
    D [04/Aug/2014:17:56:20 +0200] [Job 73] %!PS-Adobe-3.0
    D [04/Aug/2014:17:56:20 +0200] [Job 73] %%BoundingBox: 0 0 596 842
    D [04/Aug/2014:17:56:20 +0200] [Job 73] %%HiResBoundingBox: 0 0 596.00 842.00
    D [04/Aug/2014:17:56:20 +0200] [Job 73] %%Creator: GPL Ghostscript 914 (ps2write)
    D [04/Aug/2014:17:56:20 +0200] [Job 73] %%LanguageLevel: 2
    D [04/Aug/2014:17:56:20 +0200] [Job 73] %%CreationDate: D:20140804175611+02'00'
    D [04/Aug/2014:17:56:20 +0200] [Job 73] %%Pages: 1
    D [04/Aug/2014:17:56:20 +0200] [Job 73] %%EndComments
    D [04/Aug/2014:17:56:20 +0200] [Job 73] Before copy_prolog - %%BeginProlog
    D [04/Aug/2014:17:56:20 +0200] [Job 73] Before copy_setup - %%Page: 1 1
    D [04/Aug/2014:17:56:20 +0200] [Job 73] Before page loop - %%Page: 1 1
    D [04/Aug/2014:17:56:20 +0200] [Job 73] Copying page 1...
    D [04/Aug/2014:17:56:20 +0200] [Job 73] pagew = 570.0, pagel = 817.0
    D [04/Aug/2014:17:56:20 +0200] [Job 73] bboxx = 0, bboxy = 0, bboxw = 595, bboxl = 842
    D [04/Aug/2014:17:56:20 +0200] [Job 73] PageLeft = 12.5, PageRight = 582.5
    D [04/Aug/2014:17:56:20 +0200] [Job 73] PageTop = 829.5, PageBottom = 12.5
    D [04/Aug/2014:17:56:20 +0200] [Job 73] PageWidth = 595.0, PageLength = 842.0
    D [04/Aug/2014:17:56:20 +0200] [Job 73] Wrote 1 pages...
    D [04/Aug/2014:17:56:20 +0200] [Job 73] PID 4276 (pstops) exited with no errors.
    D [04/Aug/2014:17:56:20 +0200] [Job 73] PID 4275 (gs) exited with no errors.
    D [04/Aug/2014:17:56:20 +0200] [Job 73] PID 4267 (/usr/lib/cups/filter/pdftops) exited with no errors.
    D [04/Aug/2014:17:56:20 +0200] [Job 73] Read 158 bytes of print data...
    D [04/Aug/2014:17:56:20 +0200] [Job 73] Wrote 158 bytes of print data...
    D [04/Aug/2014:17:56:20 +0200] [Job 73] Read 519 bytes of print data...
    D [04/Aug/2014:17:56:20 +0200] [Job 73] Wrote 519 bytes of print data...
    D [04/Aug/2014:17:56:20 +0200] [Job 73] Read 519 bytes of print data...
    D [04/Aug/2014:17:56:20 +0200] [Job 73] Wrote 519 bytes of print data...
    D [04/Aug/2014:17:56:20 +0200] [Job 73] Read 8192 bytes of print data...
    D [04/Aug/2014:17:56:20 +0200] [Job 73] Wrote 8192 bytes of print data...
    D [04/Aug/2014:17:56:20 +0200] [Job 73] Read 7963 bytes of print data...
    D [04/Aug/2014:17:56:20 +0200] [Job 73] Wrote 7963 bytes of print data...
    D [04/Aug/2014:17:56:20 +0200] [Job 73] Read 4901 bytes of print data...
    D [04/Aug/2014:17:56:20 +0200] [Job 73] Wrote 4901 bytes of print data...
    D [04/Aug/2014:17:56:20 +0200] [Job 73] Read 4442 bytes of print data...
    D [04/Aug/2014:17:56:20 +0200] [Job 73] Wrote 4442 bytes of print data...
    D [04/Aug/2014:17:56:20 +0200] [Job 73] Read 8192 bytes of print data...
    D [04/Aug/2014:17:56:20 +0200] [Job 73] Wrote 8192 bytes of print data...
    D [04/Aug/2014:17:56:20 +0200] [Job 73] Read 1679 bytes of print data...
    D [04/Aug/2014:17:56:20 +0200] [Job 73] Wrote 1679 bytes of print data...
    D [04/Aug/2014:17:56:20 +0200] [Job 73] Read 7846 bytes of print data...
    D [04/Aug/2014:17:56:20 +0200] [Job 73] Wrote 7846 bytes of print data...
    D [04/Aug/2014:17:56:20 +0200] [Job 73] Samsung_ML-2160_Series: spl2.c:1322: RenderGDI: Assertion `ul_comp_size < ul_band_size' failed.
    D [04/Aug/2014:17:56:20 +0200] [Job 73] Sent 44411 bytes...
    D [04/Aug/2014:17:56:20 +0200] [Job 73] PID 4268 (/usr/lib/cups/filter/rastertosamsungspl) crashed on signal 6.
    D [04/Aug/2014:17:56:20 +0200] [Job 73] Hint: Try setting the LogLevel to "debug" to find out more.
    D [04/Aug/2014:17:56:20 +0200] [Job 73] Waiting for read thread to exit...
    D [04/Aug/2014:17:56:20 +0200] [Job 73] Read thread still active, aborting the pending read...
    D [04/Aug/2014:17:56:20 +0200] [Job 73] Resetting printer.
    D [04/Aug/2014:17:56:20 +0200] [Job 73] PID 4269 (/usr/lib/cups/backend/usb) exited with no errors.
    D [04/Aug/2014:17:56:20 +0200] [Job 73] End of messages
    D [04/Aug/2014:17:56:20 +0200] [Job 73] printer-state=3(idle)
    D [04/Aug/2014:17:56:20 +0200] [Job 73] printer-state-message="Filter failed"
    D [04/Aug/2014:17:56:20 +0200] [Job 73] printer-state-reasons=none
    (I wiped out some confidential information)
    Notice the failure of the RenderCGI assertion, likely causing the crash of rastertosamsungspl. I searched on the net, but didn't find a solution. However, I remembered that the CUPS packages were updated a few days ago and I manually downgraded to the previous releases. This solved the problem for now.
    Can someone see what's changed in the last release, especially regarding communication with a printer driver?

    Some older servers don't know what to do with unknown extensions. They are supposed to ignore them, but some actually close the connections with an error. By encapsulating, you are essentially stripping off any extensions because there is no such thing in the SSLv2 format. Suggest upgrading server if possible.

  • Printer fails after recent udev and kde updates

    after the very recent upgrades i made everything work again fine, all except my printer on lp0, i have another printer that still works on usb flawlessly but my other printer only works on parallel port.
    cups works and registers everything I try to print on jobs lists, but the printer light never blinks or prints as normal.
    cat asses.txt > /dev/lp0 makes the printer light print but it never prints
    anyone else having this problem?

    Sort of.
    I have a Canon Pixma iP5000 printer (USB), and after the last update it's still seen fine by the commercial CUPS backend (Turboprint) on /dev/usb/lp0 as ready and waiting jobs, but whenever I send it something to print it magically goes offline!
    The only way to print something after the upgrade is stopping the printer first, sending the print output and then starting the printer- THIS way it prints just fine!
    It looks to me like a major CUPS bug.

  • Canon MF4370 network printing fails after 10.6 upgrade

    Have been using a Canon MF4370dn printer for the past year with a desktop PC, notebook PC and two MacBook Pro. Printer was connected via Ethernet cable to our AT&T wireless router. MacBook Pro running 10.5.x was able to print via AirPort WiFi just fine. After upgrading to 10.6 and replacing the router with an Airport Express I discovered both MacBooks are no longer able to print via the network. I have tried several solutions posted on this board for various Canon UFRII printer problems, but nothing is working.
    Here are some relevant setup and diagnostic details:
    * Mac OS X 10.6.5
    * Firewall is turned off
    * Canon UFR II v2.20 driver (followed prior version uninstall procedure from manual multiple times)
    * Added printer first via Bonjour, then via IP address and LPD
    * Able to access printer management interface via web browser
    * Able to print from desktop PC via Ethernet cable and from laptop PC via WiFi
    * Able to print from MacBook Pro connected via USB. UFRII print monitor gives error "Cannot monitor this printer with the current connection."
    * Unable to print from two MacBook Pros connected either via Ethernet cable or Airport WiFi. Print command returns 10322 error "Cannot communicate with the printer" and UFRII print monitor gives error "Printer not responding."
    I would appreciate any additional ideas!
    Thanks in advance.

    Hello and welcome to Apple Discussions.
    First of all I would like to complement you on the work you have done so far. Under most situations I would have expected you to resolve your issue with all that you have done.
    The clue for getting this to work is the UFR2 Printmonitor. Once it can communicate with the MF then the driver will function.
    From your information I believe that the UFR2 Printmonitor could be still looking for the previous setup when the MF was connected via the AT&T router. When you manually delete the UFR2 driver including "UFR2.BG.plist" this does not work correctly when the service is still running. You will see the 'UFR II Backgrounder' service via Activity Monitor.
    So I suggest that you open the UFRII Printmonitor and then click on the Printer menu. You may see the MF4370dn with a USB icon next to it from the previous USB connection. And it should also show the MF4370dn with a network icon next to it. What you want to do is update this network 'link' to the current network connection and that can be done by pressing 'Search for Printer'. Nothing will be visible on the display when this completes so leave it a couple of seconds and then open the UFRII Printmonitor > Printer menu again. If you now select the MF4370dn entry shown with a network icon this should now show a connection to the printer rather than a not responding error. If this does work then you can exit Printmonitor and try printing.
    If it still fails to print then delete the MF printer queue and manually remove the UFR2 driver files again, this time adding the extra step of Force Quitting the UFRII Backgrounder service via Activity Monitor. Then restart the Mac and run the v2.20 UFR2 installer again and then add the printer via LPD.
    See how that goes and reply if needed.

  • Airport Express fails after 14 days

    My Airport Express will quit transmitting packets (both to the internet or my internal network) after 14 days and between 5 and 12 hours. Is anyone else experiencing this? It's been a problem since I've had it as I recall. It's not a big problem for me but, in a business environment this wouldn't fly. Has a solution been found? I don't mean power cycling the Airprot Express but, a REAL solution so it no longer happens.
    -Chris Wathan

    Hi Chris,
    Sorry to hear about your Airport Express quitting. My experience echoes
    b Alan's.
    My Airport Express has been up continuously since I bought it this Spring. I'd say report the problems as a potential bad sample.
    best of luck,
    ...ben
    PS. I will add to be fair, that my Airport Express replaced my
    b original
    Airport basestation, the Graphite that I used since it came out (2000?) until this past Spring. Now that one failed completely once with a capacitor problem experienced by others as well, and was replaced under AppleCare with an identical unit. But both my original Graphite basestation and its warranty replacement would, approximately weekly, hang, and would not function again until their AC power was recycled, at which point they would run just fine. Fortunately my Airport Express doesn't share that trait, and just stays up.

  • Printing to shared Windows printer fails after Yosemite upgrade

    Running Mountain Lion had a working shared printer from Windows 7 Pro - a Canon MX310.
    After upgrade the printer is still there but trying to use it results in "Support Code : 306 A communication error has occurred..."
    Tried deleting the printer then re-adding. The OS X printer app finds the printer in the windows workgroup, appears to have a little chat then says its added ok. Same Error.
    Tried a reset of the mac printing system - same.
    Printer is working on the host PC and from other network windows PC.
    Anyone else seen similar issue?

    I can't claim any experience with this printer. I am going on what the "specs" say should work.
    There are three software pieces needed to set up this printer. For the first two, you will need to download and install both the Foomatic-RIP software and the ESP Ghostscript software from <http://www.linuxprinting.org/macosx/foomatic/>.
    For the third item, you will need to download the PPD for this printer from <http://www.linuxprinting.org/show_printer.cgi?recnum=Canon-BJ-200>. Place the PPD in the following folder (make any folders that are not already on your system):
    /Library/Printers/PPDs/Contents/Resources/en.lproj
    This setup will use the bj200 device that is built into Ghostscript. The notes that I find in the device driver indicate that this is using the BJ-10 command set. The manual for the bj-200e shows that this is one of the languages it can use. There might be some DIP switches you need to set to make things compatible with this command set and/or the line spacing set forth in the device driver.
    Let us know how this goes.
    Matt
    Mac Mini G4; B&W G3/300    

  • Printing to AEX connected printer fails after printing from WinXP

    I have an HP Laserjet 1010 printer connected to my Airport Express Base Station. Setting up the printer on my iBook and my PC (WinXP and Linux) worked fine.
    But everytime I printed from WinXP I have to restart the Base Station because I cannot print anymore. After restarting it works again. This happens only after printing from WinXP.
    The firmware of the AEX is V6.2.

    Firmware Version:
    4.0.16.1.56.0.10.14.4
    Model Name:
    MI424-WR
    Hardware Version:
    D
    Again - it's a verizon router.   For the record, I kept the printer turned off all day - while I was at work.  I came home, I rebooted the router twice.  I looked in the table, I renamed the epson printer that was in there (marked inactive).  I renamed that to "notonet".  It was the *.8 ip address.  I then restored the printer to factory settings.  I set the printer back up on the net.  It retook the *.8 ip address - in the router table - the name was just "notonet".  So I renamed it back to Epson - it didn't really change anything.
    Now, all devices see the printer and can print.   But - soon - it will disappear!

  • Printer failed after update

    I have a Canon PIXMA MP610 printer which worked fine on Tiger,10.4. After upgrade to Leopard 10.5.5, all I can get is immaculate white paper. The MP610 is not among the printers listed for Leopard so I tried two other models but still producing lily-whiteness. I understand that the driver in most of the PIXMA range is the GUTENPRINT v5.1.3, so that cannot be the problem.
    I still have the installation disk. Should I try re-installing. Failing that what should I do? The Canon help-line seems to be closed for a few days.

    Upgrade to the latest version (5.2.2) of Gutenprint from _http://gutenprint.sourceforge.net/MacOSX.php_. There is a driver for the Canon PIXMA MP610 in that version.

  • Sql Agent Job Failed after changing job name to sa Error(The job owner does not have access )

    I changed  job owner to sa and it worked well, But now it fails saying job owner does not have sever access and shows job owner as previous owner Name even after it changed to sa?
    Help......

    EXEC msdb.dbo.sp_update_job @job_id=N'7d4d4040-b79c-4022-9d19-e449497ab60e', 
    @owner_login_name=N'sa'
    Best Regards,Uri Dimant SQL Server MVP,
    http://sqlblog.com/blogs/uri_dimant/
    MS SQL optimization: MS SQL Development and Optimization
    MS SQL Consulting:
    Large scale of database and data cleansing
    Remote DBA Services:
    Improves MS SQL Database Performance
    SQL Server Integration Services:
    Business Intelligence

  • Printer stops after one document

    My Printer works for first document sent to print, but will not print a subsequent document sent to print.  The second one shows in the print queue.  I have to turn the printer off and then back on to get it to resume printing.  How do I fix this?
    Thanks so much for your help.

    @EllenB1,
    No, the PSDR is only supported on Windows Operatin systems.
    I would like you to continue with the steps listed below:
    Scrub/ Uninstall
    • Open the Applications folder > HP or Hewlett Packard folder > HP Uninstaller
    • Click continue, click on one of the printers in the list.
    • * Only do this step if you do not have any other HP Printers. Hold down Control, Option and Command, While holding the three buttons down,
    • Click uninstall.
    Reset Printing System
    1. Click the Apple icon (   ), and then click System Preferences.
    2. In the Hardware section, click Print & Fax/Scan. The Print & Fax/Scan  dialog box opens.
    3. Right-click (or  Ctrl  +click) in the left panel, and then click Reset printing system…
    4. Click OK to confirm the reset.
    5. Type the correct Name and Password.
    6. Click OK to reset the printing system. The Print & Fax dialog box shows no printer selected
    Note: This will remove all printers in the print and Fax/Scan, any printer removed can be re-added later by clicking the plus (+) symbol..
    Repair Disk Permissions
    1.On the Dock, click Applications, and then click Utilities.
    2.Double-click Disk Utility.
    3.Highlight your hard drive/partition on the left (by default this is "Macintosh HD").
    4.Click the Repair Disk Permissions button at the bottom of the window.
    5.Once the repair is complete, restart the computer.
    Restart the printer. Now you can download and install the printer software and install it. Click on the link below to begin the download and follow the on screen instructions:
    http://support.hp.com/us-en/drivers/selfservice/HP-Officejet-6700-e-All-in-One-Printer-series---H7/4...
    I hope this helps, please let me know the outcome!
    Thanks,
    HevnLgh
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • Connection to airport express fails after iTunes 10.1.1.4 upgrade !

    Hi,
    Before ugrading iTunes to V10.1.1.4, everything was OK and I was listening music from itunes through airTunes with my airport express V 6.3.
    Since I've upgraded iTunes, when à play a song, I've the error msg "cannot connect to [airport express name]. network connection failure"
    It's the second time, I've connection problems to airport express after an iTunes upgrade !
    First time was just after uorgrade from iTunes 9 to iTunes 10.
    I had to wait for a new iTunes upgrade to fix up the problem (nearly 1 month !)
    I'm a bit angry with iTunes and that kind of problems just before christmas !
    Thanks for your help !
    Message was edited by: Amalthee

    Yes, there's an exception for Bonjour in the firewall (Bonjour is allowed)
    I've try to re-add the "APAgent" which control Airports and restart the firewall but it didn't worked...
    The only solution I've found was to desactivate Windows firewall...
    (Firewall of my ADSL box is activated).
    Maybe I should try to repair iTunes Installation like WPLU...

  • "Load Report Failed" after one minute of inactivity

    Post Author: djsmitherman
    CA Forum: General
    Hi.
    I've got reports being accessed via an asp.net application using crystal report viewer. The reports come up and display just fine, but if the user is inactive for 60 seconds or longer, then clicking on any command on the crystal toolbar - next page, print report, etc - the report page blanks out and an error is displayed above the toolbar that reads "Load Report Failed."
    Is this some timeout feature that can be controlled via the web.config file, or any other way? The URL in the report page does include a date/time parameter.
    Thanks for the help.
    Danny

    Energy Saver: disable option to dim screen before sleep. Be sure to configure the computer to not sleep when on AC power. Be sure you haven't select Battery for your Energy Saver options. Set your sleep time higher.
    If you're running on battery you'll need to uncheck the option to dim display when on that power source.

  • Rc-local.service keeps failing after one time success

    Actually it's quite weird, every time rc-local.service was enable successfully with boot but then it keeps failing. However, once I modify /etc/systemd /system/rc-local.service( even something that really doesn't matter ), it will be enabled successfully again. but only ONCE each time.
    [Unit]
    Description=/etc/rc.local compatibility
    [Service]
    Type=oneshot
    ExecStart=/etc/rc.local
    TimeoutSec=0
    RemainAfterExit=yes
    [Install]
    WantedBy=multi-user.target

    All of those things can be done with udev rules.  I had a Momentus XT, which I now no longer have in my system, but my old rule is still there.  It is as follows:
    ACTION=="add", SUBSYSTEM=="block", ATTRS{model}=="ST95005620AS", RUN+="/sbin/hdparm -B 247 /dev/$kernel"
    You could also do something like this to apply it to all rotational disks
    ACTION=="add", KERNEL=="sd[a-z]", ATTR{queue/rotational}=="0", RUN+="/sbin/hdparm -B 254 /dev/$kernel"
    As far as the stuff in /sys, use udevadm to get stuff to put in your rule to identify it.  So something like
    $ udevadm info -a -p /sys/kernel/debug/vgaswiteroo
    I have also used a rule for my backlight setting on boot.  To find stuff, once again use the udevadm
    $ udevadm info -a -p /sys/class/backlight/acpi_video0
    My resulting backlight rule is:
    ACTION=="add", KERNEL=="acpi_video0", SUBSYSTEM=="backlight", SUBSYSTEMS=="pci", DRIVERS=="i915", ATTR{brightness}="2"
    For more info on writing udev rules see http://www.reactivated.net/writing_udev_rules.html but when you get to the part about the udev commands, those no longer apply, as they have now been replaced by the udevadm commands listed above.  The commands are mostly correct, just instead of udevinfo, it is udevadm.
    I hope this helps!
    Last edited by WonderWoofy (2012-11-02 02:59:59)

  • Just installed the latest Canon printer software update (V 3.2) from the App store. Canon Pixma MX850 will not print. Dialog says job stopped at the server - no pages found. Utilities, print test page works. Printing via Airport.

    Just installed the latest Canon printer software update (V 3.2) suggested by the App store in effort to get printer working after OS update. Canon Pixma MX850 will not print. Dialog says job stopped at the server - no pages found. Utilities, print test page works. Attempting to print via Airport from a MacBook Pro. Also from a Mac Pro via ethernet. Both worked before updating to Yosemite. Canon Pro 9000 Mk 2 works via USB. Tried installing driver 10.84 from OS 10.9 as suggested by PAHU; no luck.

    The "stopped at server - no pages found" message would suggest an image with the print file that is created by the printer driver on the MacBook Pro. But if the Mac Pro is getting the same message then that is unusual.
    To rule out a couple of causes I would try connecting the MacBook Pro directly to the MX850 by USB cable. This action should result in a new printer for the USB connection being created automatically. If not then you may need to manually create it as you won't be able to use the existing printer that exists for the network connection. With the new printer created see if this will let you print without error.
    If this USB connected printer also fails with the same message then try a reset of the printing system. Note that this action will also remove the Pro 9000 from Printers & Scanners so you will have to add it and the MX850 again.

Maybe you are looking for

  • Negative sign display for CURR field in ALV grid report

    I have a field BETRG defined as CURR field of length 15, decimal places 2. The value may be negative or positive. In case of negative values I am using EDIT_MSK option in the field catalog to bring the negative sign to the left of the value as shown

  • How to use vertical scroll browser in Flex web app?

    Hi, I´m developing a web app with flex3. Web app has linkbar connected to a viewstack, that contain inside a canvas that change the height property depending on the option selected on the linkbar. My problem is that, when the viewstack resizes his ca

  • Re: Standby Problem Windows XP with Satellite L350-172

    Hello After waking up the system it works a few minutes proper but than i see bluescreen abd immediate reboot. Do you also have those problems? What can i do

  • Flex 4 Beta 2 spark: 'loadStyleDeclarations' has been deprecated since 4.0., IStyleManager2 ?

    Hi there, switching some code from Flex 4.0.0 Beta1 to Flex 4.0.0 Beta2 (build 12412), I need help to convert the following to the new syntax/approach:           var myCssModuleStyleEvent:IEventDispatcher = StyleManager.loadStyleDeclarations(        

  • Forms 6i and Forms 9i

    I am current obtaining my OCP (Developer) in about 3 weeks. 1 test to go. I was wondering. the certification is based on the 6i release, now that forms 9i is out, should this be a concern to me, as in should I start to learn forms 9i, or stick with 6