Alignment error!

<font size=+1><b>Cinema:</b>
<%
String desc=request.getParameter("desc");
ProductDB db = BookUtil.getProductDB(application);
Product p = db.getBySKU(sku);
if(p!=null){
if(p.getDescription()!=null && p.getDescription().equals(desc))
{out.println(desc);
out.println("Screening Time:" + p.getTime());}
May I know how to leave a line from cinema and screening time.
The output i get is -> Cinema:xxxScreening Time:xxx
What i want is-> Cinema:xxx
Screening time:xxx
Thanx for helping

A small change, out.print(desc+"<br>");

Similar Messages

DVD burner (UJ-825) does not recognize blank media - alignment error

Hello,
when inserting (tried several) blank DVD into my iMac DVD burner, it spits it out after a few seconds ...
error message in the logs
Jul 4 04:43:46 Bazounga kernel[0]: disk2: alignment error.
is there anyway I could re-calibrate the head of the DVD burner or is could the problem be coming from somewhere else.
N.B.: home burned DVDs cannot be read anymore (same behaviour)
When inserting a blank CD it recognises it but trying to burn a "burnable folder" is fails with error message 0x8002006E)
Finder: Write (10), block: 4294967146, count: 32 -> 3/0C/00 Medium Error, Write error
Finder: Burn failed, Wed Jul 4 05:33:38 2007
Finder: Burn sense: 3/0C/00 Medium Error, Write error
Finder: Burn error: 0x8002006E La gravure a √©chou√© √† cause d'une erreur d'√©criture sur le m√
same kind of error appeared previously with DVD's
But commercial CD's and DVD can be read after some "hesitation noise"
Is my burner dead ?

Normally this error message is caused by incorrect Format or some of the cheaper incompatible Brands of Media. I suggest you use this.
http://www.digitalfaq.com/media/dvdmedia.htm
I also suggest you use DVD-R Media.
it is the most recognized all around.
Be sure when you buy that your optical drive will burn at the speed it was designed to use.
Many of the higher speed media like 16X will not work on older computers.
They will give you error messages
Here is another good link that explains it.
http://www.videohelp.com/dvd
I suggest you find Maxell 16X DVD-R media in the individual Jewel Cases and read the packaging and you will see that it will burn at 1X,2X,4X,8X,and 16X this media will work with just about anything in the way of computers.
Don

Officejet 8500A 909n Wireless, color alignment error

My printer gives me an alignment failure error every time I print in color. The quality prin test looks good also

Hi @199dog ,
I see by your post that every time you try to print, you are getting a alignment error. I would like to help you out with
this issue.
I have provided a document for the alignment error, to go through the steps to see if that will resolve this issue.
An 'Alignment failed' Error Message Displays on the Printer Control Panel.
Here is a document to check the cartridges. I would clean the contacts on the them also.
An 'Ink Cartridge Appears to Be Missing or Damaged' Error Message Displays on the Printer Control Pa...
I have provided this document for manually cleaning the printheads.
'The Following Printhead Appears to be Missing or Damaged' or 'The Following Printhead has a Problem...
Are you using Genuine HP Cartridges?
What are the ink levels?
If you need further assistance, just let me know.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Superdrive not mounting "disk1: alignment error."

Howdy,
I've got a bit of a delima. I tried to pop a cd rom into my computer yesterday
and I got the following error:
"The disk you inserted was not readable by this computer"
Ignore or Eject.
now it seems when I put any disc into the drive the computer refuses to
mount it. If I look in the system log I have the following message for each
time I stick in a cd:
disk1: alignment error.
This message is repeated q few times.. I can see the disc in the "Disk
Utility", and the size reported corresponds to what the disc should contain,
the other information is there as well (such as the other informaiton like the
manufacturer). However I cannot mount the disc. I've tried discs I know are
good that I've used in this computer before, and I get the same result. Keep
in mind that the drive doe not eject the disc, it just sits there. Does
anyone have any thoughts on this? I did a secuirty update recently, though
that is about it interms of installing software.

My quess is that the CD Media you are using may be to high a speed or the Fromat you used and then there is CHEAP CD's all 3 of these can affect the performance.
Check your System Profiler and the Optical Drive in your computer and make sure you are using Good High Quality Media and of the correct Format. Remember Apple Optical Drives have a tendency to be much picker than PC's
Don

What does disk2s2: alignment error mean?

I just got a Western Digital My Book. It was a warranty exchange. Its 4TB and came PC formatted. I reformatted for Mac.... In disk utility, selected partition, 1 partition, guild format, and applied. In console though, it gave me a disk2s2: alignment error. What does this mean?

Hello graphicgirl44,
It sounds like you are getting an error from a partition on your replacement hard drive. There can be a few things that could cause that error, so I would use the Disk Utility to attempt to repair this external drive:
Repair disk formatting information
In the list at the left, select the disk you want to repair. (Be sure to select an item that’s at the far left, and not one indented to the right.)
Click First Aid.
Click Repair Disk.
Disk Utility examines your disk’s formatting information for errors and corrects any it finds.
If Disk Utility can’t repair the disk’s formatting information, back up as much of your data as possible, partition it, reinstall OS X, then restore your backed-up data.
Partition a disk
Thank you for using Apple Support Communities.
Cheers,
Sterling

Officejet 6500 - Alignment Error

My black ink was not printing so I cleaned the print head. Once I replaced the head with a full black ink I received an alignment error. I unplugged the printer to reset and I still received the error.
Can someone assist please Thank you

Hello there! Welcome to the forums @gmalone
I read about the "Alignment Failed" issue you're having with your Officejet 6500 after cleaning the printhead. My best suggestion to you, would be to try all of the steps in the guide below to hopefully get the alignment to pass successfully.
An 'Alignment failed' Error Message Displays on the Printer
If the troubleshooting does not help at all, I would lastly suggest technical support.
Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
All the best
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Printer 8200 prints mainly cyan,alignment error

PHOTOSMART PRINTER 8250 , HAS NEW PRINT CARTRIDGES INSTALLED,THE CYAN CARTRIDGE HAS EMPTIED VERY FAST , ALL PAGES PRINT WITH A BLUE TINT. ALIGNMENT ERROR CALL CUSTOMER CARE,ERROR MSG.

The document here has troubleshooting steps that may help resolve black not printing on your Photosmart c309a. Be sure to check the vents. If the above does not resolve the problem the post here may help.
[Edit - Alignment will fail if the black and cyan are not printing properly....]
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

X64 page alignment error

I installed a new HP black cartridge. The printer told me to insert white paper and hit OK to align the page. It starts to align then I get an error telling me the alignment failed and to refer to the device documentation. I can't find anything about that error messages. Anyone been able to solve this. It won't print anything until I get the alignment done.

Hi @bacompi
What printer model do you have? How Do I Find My Model Number or Product Number?
Please refer to the following link for information regarding alignment failure. I hope this is helpful.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Hp deskjet ink advantage 3545 printer alignment error

ON screen showing now printing alignment page
nothing process

Hello @OVTL
Welcome to the HP community,
I read your message about the alignment page not printing when the screen displays that it is. I would personally think that there could be an ink cartridge problem causing the alignment page not to print and I have a few suggestions for you to try.
1. Reset the Printer and try printing the alignment page again:
Press the Power button to turn on the product.
With the product turned on, disconnect the power cord from the rear of the product.
Unplug the power cord from the wall outlet.
Wait at least 15 seconds.
Plug the power cord back into the wall outlet.
Reconnect the power cord to the rear of the product.
If the product does not turn on by itself, press the Power button to turn it on.
2. Follow the steps shown in this guide for ink cartridge issues: A 'Cartridge Missing' or 'Incompatible Ink Cartridges' Error Message Displays for HP ENVY 4500 e-All...
If the alignment page will still not print, please give us a call to see what your printer options are:
Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
Have a wonderful day
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Muse Alignment error

Hi There,
This has been extremely frustrating and i cant seem to figure out why it does this, nor can i find a solution online.
So i design the site in adobe muse, it looks good, but when i export it to html, it has a bunch of alignment issues. Also when i export the html and upload it to an ftp, i might see it well, but then when i view the site on a different computer using the same browser the alignment is once again all off.
Help please!!
thanks!

I figured out my problem, I made a typo when entering my clients email address...
I guess that will teach me to not look more closely...
If anyone else ever comes up with that kind of an error, you know what causes it now...

Can Grow Vertical Alignment Error in Embedded Report View, but not in .PDF

Hello,
I have seen postings about this issue before, but have yet to find a solution.
I am using Visual Studio 2008 w/ the basic version of Crystal Reports that is included.
I have a simple report that displays results of a stored procedure as rows across the report. One field can be of variable length, anywhere from 0 to 100 characters. Usually it's something reasonable (less than 40 chars), and so I have only given it so much width in the report. For when it is longer than that, I turned the "Can Grow" property ON, and set the Maximum Number of Lines property to 0.
When the report displays embedded in my Web Form, and this field's data is wider than the space I have allowed, it breaks the data down into multiple lines of the same correct width, as you'd expect, but those lines end up displaced vertically upward several rows, and print directly on top of other data from the above rows, make the report unreadable in that area (and quite ugly overall!).
If I export this report to a .PDF, it displays perfectly, without the vertical displacement error.
Anyone know what the official work is on this? Is there a fix or is this a bug?
If there is no fix, does anyone know how to direct the report to the .PDF file viewer, so the embedded report remains invisible (and thus hides the ugly error), but the user has the .PDF version to see? My client ultimately wants to export the report to .PDF, which I have already coded, but it does not open the .PDF Viewer, just saves the report to disk. However, if I use the Crystal built-in Export button, it first displays a pop-up asking which format to export to, then if .PDF is chosen and okay is clicked, the pop-up switches to contain the .PDF Viewer, and opens the report. In my user-defined export code, the .PDF is correctly created, but I am missing the step on how to open the .PDF Viewer.
Any ideas?

Thanks for the responses.
Jonathan, moving the field in question to its own details section (details B) did not fix the issue. The field in question is moved slightly down as its in a new details section with sits slightly lower than details A, but when it has to be broken up into multiple lines, the same issue arises, the field text is displaced vertically upward and sits on top of other data.
Ludek, I wanted to send the report to a .PDF Viewer in a new browser, and keep the original browser intact. I'm using code very similar to yours. To launch the new broswer I added this code to the Page_Load of my main browser:
btnViewReport.Attributes.Add("onclick", "window.open(Page.aspx', """", """", 'height=200,width=400')")
When the button is clicked the report is exported, and the new browser opens Page.aspx.
I use this code in Page_Load of Page.aspx:
        Dim webClient As System.Net.WebClient = New System.Net.WebClient()
        Dim buffer As Byte() = webClient.DownloadData("C:\Reports\Report.pdf")
        If Not buffer.Length.Equals(0) Then
            Response.ContentType = "application/pdf"
            Response.AddHeader("content-length", buffer.Length.ToString())
            Response.BinaryWrite(buffer)
        End If
Any other ideas on the original vertical displacement issue when using Can Grow, I'd still appreciate it.
Thanks,
Scott
Edited by: Scott Deltorto on Sep 23, 2008 10:15 PM

TXT attachment alignment error

Hi,
creating an attachment in .txt format..
used CONCATENATE con_cret it_attach into it_attach.
        CONDENSE it_attach.
        APPEND it_attach.
to append the data to internal table...
If i Checkin SBWP---output is good but not in mail attachment...
in attachment file every other line is coming after 255 characters
aaaa...........................bb
cc............................dd
if i see in word wrap
aaaa
         bb
                cc
                         dd
Needed output is as below:
aaaa
bbb
ccc
ddd
Does my delimiter have any error?

Hi guys,
I got the solution with the following statement
CONCATENATE it_attach con_cret into it_attach.

Agentry - Field alignment errors in Windows client

I'm running WM6.1 on the 7.03.605 Windows client and I've been unable to find any solution to field values aligning on top while their labels are aligned to the base of the line. This is somewhat noticeable at the default window size and glaringly obvious if the window is maximized on a larger screen such as 1920x1080.
Is there any option other than rebuilding these screens so they have separate label entries floating above the field values?
The screenshot shows how bad this is. I've drawn a red box around two of the fields to show just how much higher they are than their corresponding label.
Tags edited by: Michael Appleby

Hi Chris,
if I remember correctly, the alignment is "correct" for object properties that do not have the "Word Wrap" option checked. A workaround for object properties with "Word Wrap" enabled is the following:
- change the fields object property to :>Main Object>"DummyNoWrap" Property where the DummyNoWrap Property is a String Property that has no "Word Wrap" enabled.
- add an update rule that updates the field with the property you want to display on that field
I do not think this will work on transaction screens, but maybe it covers your problem.
Regards, Daniel

3680 Alignment error

No matter how many times i run the print alignment function it still shows alignment fail. Any suggestions? I have never been happy with this product. It cost me approximately $25 per document if you include price of printer and ink cartridges after every 5 black documents. It cleans itself and the inktanks are gone. Never seen anything like it. They even replaced it once, I wish I would have bought something else.

Hi James
Try following the doc below, does this solve it?
Alignment failed message
Best Regards
Ciara
Although I am an HP employee, I am speaking for myself and not for HP.
Twitter: @Ciara_B_HP

Align Error with Clipping Group in Group

In CS4, if you make a clipping group by placing a large object inside a smaller object,
and then have that clipping group inside yet another group,
and you use the Align commands on that parent group ...
AI considers the contents of the clipping group and it's impossible to align things properly.
I know this was somewhat fixed for CS4, but, again, the problem is still there if the clipping group is in yet another group.
That would be great if that could be fixed.

Roar,
2 comments:
1. Query into PLSQL variables and not forms fileds. After a successful query, set the value in teh variables to teh forms fields
2. another problem with your implementation is that it breaks when many rows are retruned. You should use a cursor that loops trhough the query result sets. This way you are save.
Frank

Alignment error with printer HP4500

I have a new HP4500 wirelessly connected to my desktop using windows 7. Although it works perfectly it tends to print too high up on each sheet of paper and with some printing adds a line at the top and the bottom of the page showing about one third of each character. The cartridges are HP and the display on the Word screen is spaced correctly.

Hello @sideslip and welcome to the HP Forums
Which HP 4500 do you have?
Are you able to make a Copy on that 4500 without the same issue occurring?
Is the printer connected via USB or wireless?
Does it have that issue regardless of what program you print from?
Once I have this information I should be able to help you narrow down what's causing the issue!
Hope to hear from you soon
Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
**MissTeriLynn**
I work on behalf of HP

Alignment error!

Similar Messages

Maybe you are looking for