Alltel plan coverage area

I am currently on the "FAM FRIENDS & FAMILY10 G/F1200" plan carried over from Alltel. GF stands for Greater Freedom which was a plan with a regional coverage area with roaming outside of a specified area. When I recently stopped in a Verizon store to inquire about upgrading my phones, I was told that my coverage area was now the Verizon Nationwide calling area with no roaming at all. This didn't seem right to me, so I called customer service, but I was again told the same thing (the rep seemed confused though). All I am trying to do now is figure out what my calling area is and if I ever have to be aware of roaming charges. I live in Wisconsin, so I think it used to be all of Wisconsin, the lower half of Minnesota, and all of Michigan (possibly the upper half of Illinois). Anyone have any input on this or know of how to find some solid information?
Thanks!

I just upgraded two of my lines to iPhone and am also an old Alltel customer with the FRIENDS & FAMILY10 S/P 1200 plan. Mine is a nationwide plan with unlimited everything. we have 3 smartphones and pay I $40 eaach for the two additional lines. The ONLY change to my plan is an increase in the insurance for the new phones. I find it best to do everything with Verizon online. If I am upgrading or whatever. you can always back out and not hit the final "submit" button but will know if anything such as an upgrade, etc. with change your plan. Stick with it! Our plans are the bomb compared to others I know... BTW S/P stands for special promotion where I have unlimited text messages and something called National Access Roaming PAYU. I can even go to Mexico and text for free. It's awesome!

Similar Messages

No Data Plan for you if you are not in AT&T coverage area

We have great iPhone coverage here at home, but it is AT&T partner coverage. When I tried to sign up for a data plan on my new iPad 3g, AT&T would not accept the billing address that I have used with AT&T for years. When I called AT&T, they said "We're sorry, you should have known that and not bought a 3g iPad." Although you may use the data service all over the United States, if your home is not in the AT&T coverage area, no data plan for you! Apple has been no help so far either. The only solution I see in the short term is to get a credit card at a relative's address who is in a coverage area.
If anyone knows a work around, I would appreciate some advice...
Thanks, R.W. Simms

dartagnan64 wrote:
Will this work if you live out of the US. Just supply a US address (my parent's condo in Palm Desert for instance) then update to my Canadian Billing address later. Or does the Billing address always have to be American? Kind of pointless if you consider the iPad the ultimate travel device as was envisioned by Apple.
1. Most credit cards do not allow you to change your address to one outside of your country. Again, most, but not all. (The reason isn't nefarious or anything, it's just that it's credit laws vary by country, and your Canadian Bank might not be able to sue you in the US if you decide to quit paying your bills.)
2. AT&T Wireless is a US company (thought it probably has businesses in some other countries). Again, for credit reasons and probably Apple restricting markets as they should, it's probably not going to work.
3. The iPad is the ultimate travel device. It's a US product for US users, so not being able to get a data plan from a US company because you're Canadian, does not lessen it's usefulness. I'm sure it will be launched in Canada soon, and you'll be able to use it with Rogers or whatever network you have up there. Maybe it will be cheaper.
Go watch some hockey for 3 or 4 weeks, and I'm sure it will be in Canada officially! And I'm not being snarky, because I'm loving the Canadiens right now.

Will my data be in roaming in the florida panhandle? i am on an alltel plan from north louisiana

i was with alltel when verizon bought it and though i tried to change to verizon plans twice at contract renewal i am still on my original alltel plan and coverage area which results in roaming charges when i leave north louisiana or south arkansas and sometimes through system glitches when i don't go out of area

BUT, you are a Verizon customer on an old Nationwide Plan from Alltel? If this is correct, then as a Verizon customer you are pretty much good all over the panhandle and based on the coverage map, good as well. I was Alltel till ATT bought out half the state and Verizon bought the other half of the state as far as Alltel goes. The point is, are you a Verizon customer? I don't get why you couldn't change plans if you are a Verizon customer.

IPhone on Alltel plan

I have 4 phones on an Alltel plan. 2 are Verizon phones, 2 are out of contract Alltel phones. Will I have to update both of those phones to Verizon phones. I'd like to take one of the Verizon phones, move it to one of the out of contract spots and then upgrade my main line (currently under contract) to an iPhone and keep my Alltel plan. I've had a terrible transition from Alltel to Verizon spending hours of time trying to get my Verizon service to be as good as my Alltel service was (coverage), but eventually it ends in no returned call. Still Verizon is better than AT&T in my area, so I guess I'm sticking with them. I really had hoped to be out of all contracts, but Verizon sales told me that the best way to solve my coverage issues was going to be to upgrade my phones. I did that a year ago. Should have done one year contracts I guess, although the updates haven't helped at all.

You cannot get an iPhone on the Alltel plan. I had recently received an email from my work that would give me a 22% discount off a Verizon plan. I spoke to our company verizon rep and he stated you can't get iPhone with Alltel plan. Switched over today and will actually be saving money in comparison to my Alltel plan.

Coverage area and perimeter

Hello,
I don´t understand very well the difference between coverage area and perimeter in the WCS Map Editor.
I only want that APs coverage offer service inside the building and then avoid that a person can connects when he is outside the building.
To do it, What I have to do? I have to draw a coverage area inside the building or perimeter, or both?
Regards,

Hi, thx for your reply. I played with the Planner, defining one large Perimeter and 4 Coverage Areas inside, excluding one Inner Area. The Planner dont worry about that, he plans for the full Area. Regards, Michael

Too late to go back to alltel plan??

I'm a little irritated with this new data plan deal with Verizon. Mostly because I found out I had to get a smartphone before July 7th to keep my unlimited data plan I already have on my EnvTouch. This isn't what really irriatates me though.
I had an alltel plan till about two weeks ago. It was called local B 400 minutes for 30.00 a month. I also had the unlimited data 29.99 which was a verizon data plan. I work for the government so I get an employee discount 18 percent on voice, 20% on data. Well I figured out that if I switched to a Verizon plan I can get the discount on voice and the discount on data and the total bill will actually come out cheaper then my alltel plan and unlimited data. Now this new data plan comes out and I will lose my discount on data and my bill will now be more expensive then had I just left it the way it was with the alltel plan.
Since I just did this two weeks ago Verizon sold me on the idea that I would save money (which I am, but not for long when they take away my data discount) and now they are changing it do you think there is anyway they would let me go back?

tkuligowski wrote:
I'm a little irritated with this new data plan deal with Verizon. Mostly because I found out I had to get a smartphone before July 7th to keep my unlimited data plan I already have on my EnvTouch. This isn't what really irriatates me though.
I had an alltel plan till about two weeks ago. It was called local B 400 minutes for 30.00 a month. I also had the unlimited data 29.99 which was a verizon data plan. I work for the government so I get an employee discount 18 percent on voice, 20% on data. Well I figured out that if I switched to a Verizon plan I can get the discount on voice and the discount on data and the total bill will actually come out cheaper then my alltel plan and unlimited data. Now this new data plan comes out and I will lose my discount on data and my bill will now be more expensive then had I just left it the way it was with the alltel plan.
Since I just did this two weeks ago Verizon sold me on the idea that I would save money (which I am, but not for long when they take away my data discount) and now they are changing it do you think there is anyway they would let me go back?
Uhm... what?
What new data plan? You are completely getting a lot of misinformation here. You are not a new customer and you get to KEEP your data plan. Any discount you have will stay there UNLESS the company you work for changed their agreement with Verizon.

Manually Updating my coverage area

Hi, I just updated my vzaccess successfully, but once I start running it, it reminds me that a area coverage update is available. Every time I tell it to update, it always comes back update failed. I notice that the connection constantly switches from 1x to Mobil Broadband (EV-Rev A). When it's on 1X, its slower than molasses in January. We have 3 Droid 2's and my DroidX and 95% of the time we pull in 3G, why wont the mifi update and stay connected to the high speed? It has been forever since I was able to successfully update the Area Coverage. I know for a while Verizon pushed through a hybrid PRL that I think made it connect to a Alltel tower or something. But 6 month later or so they said it was OK to go through the activation process that everything is hybrid. After several attempts, I was able to get it to update. But that was like a year ago. Is there someway I can manually update the PRL or coverage area manually. I live in Wyocena, WI if that will help me get the right PRL. Thanks, Jammindog

Nevermind! I got it!

Not connecting to 3G when leaving wifi coverage area

When I leave the home wifi coverage area, the 4S does not switch to 3G. I have to restart the device.

That's the difference, the Service Books.
I am assuming the working device was either activated in the US and got the Service Books in that way, and are still active. Is one of the Service Books a [provisoning] entry?
Either way, it is my experience that you will need activation on the device(s) for 3G service. That means having an active BIS account connected.
Besides, as pertains to 3G, without the BlackBerry Data Plan, there's really no need for the 3G service. You won't have any data services to the device, save some TCP/APN connection, without the proper data plan provisioned to the SIM in the device.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Upgrade to new iPhone with old Alltel plan?

I'm currently on an LG Banter using my plan that I had with Alltel before Verizon bought it out. Plan is as so:
1200 minutes
Unlimited M2M (voice and text)
Unlimited nights and weekends (voice)
1 F&F number (voice, text, pics)
400 messages
Basically what you need to get out of that is the F&F number for voice, text, and pics. For my purposes, that is just as good as unlimited texting, but a good deal cheaper. Is it possible to get the new iPhone while adding a data plan to my current plan, or will I have to make a new plan from scratch, thus losing my F&F?

shageman13 wrote:
I'm currently on an LG Banter using my plan that I had with Alltel before Verizon bought it out. Plan is as so:
1200 minutes
Unlimited M2M (voice and text)
Unlimited nights and weekends (voice)
1 F&F number (voice, text, pics)
400 messages
Basically what you need to get out of that is the F&F number for voice, text, and pics. For my purposes, that is just as good as unlimited texting, but a good deal cheaper. Is it possible to get the new iPhone while adding a data plan to my current plan, or will I have to make a new plan from scratch, thus losing my F&F?
I believe you will lose your current Alltel plan if you upgrade, as the plan is no longer offered.

Poor 3g reception issue does not come from being in a low coverage area.

For All of you who keep saying that "If youre in a low coverage area the 3g service wont work you must turn off 3g". That is not a solution. Yes it fixes the problem of not being able to talk on the phone but that is just a workaround that in my opinion is not acceptable. The name of the phone is iPhone 3g. The entire reason for buying this phone is the 3g network. If thats not there and frankly who cares about the GPS as its pretty much useless, then we could have kept our old phones. There are numerous reports of people using their old devices with 3g side by side and getting great reception on their other handset. In my opinion there is a problem with this phone and it should probably be returned until apple figures out what they did wrong. Its not the 3g network and its not a lack of coverage as other handsets are getting great reception. ITS THE PHONE!!!

I removed all of the interface methods and set those properties and it still
didn't work.
I also have a custom skin on this class. I removed that and tabbing started
to work again.
Is there any good advise on how to prevent my skin from having effect on the
group within the container? I've seen a good bit about focus and skins, but
nothing about skins on a container? all the skin has is replacements for the
header bar and the close button.
Thanks!

Values in "vendor batch" in the Goods-in-order and Goods-in-plan lists are

Vendor batch No. : Transaction ZJPMPU322
(Background)
There are "vendor batch" and "batch" fields in Goods-in-order and Goods-in-plan lists (transaction ZJPMPU322). Values for these fields are retrieved from inbound delivery document (transaction VL33N). After core 7.0 upgrade, "vendor batch" is not copied from "batch" in inbound delivery document any more so that nothing appears in the vendor batch field in the lists.
(Change request)
Values in "vendor batch" in the Goods-in-order and Goods-in-plan lists are retrieved from "batch" in inbound delivery document ONLY IF "vendor batch" is blank in the inbound delivery document.
(Current design)
Batch is retrieved from LIPS-CHARG
Vendor batch is retrieved from LIPS-LICHN
(If there is no record in LIPS, blank will be printed out for both fields)
(After change)
Batch is retrieved from LIPS-CHARG
Vendor batch is retrieved from LIPS-LICHN only if LIPS-LICHN is not blank.
If LIPS-LICHN is blank, vendor batch is retrieved from LIPS-CHARG.
(If there is no record in LIPS, blank will be printed out for both fields. If both LIPS-CHARG and LIPS-LICHN are blank, blank will be printed out for both fields),
Following is the program:
REPORT zjpmrpu322 MESSAGE-ID zjpm001
              NO STANDARD PAGE HEADING
                        LINE-COUNT 50
                        LINE-SIZE 255.
*&   Development ID: PU_DD_322_LJP                                     *
*&   Report        : ZJPMRPU322                                        *
*&   The Purpose of this program is to print the Goods-in-order list *
*&   and the Goods in plan list for raw materials, materials purchase *
*&   etc at the Sasayama plant, Japan.                                 *
*&   Change Log:                                                       *
*&   Init    Who              Date        Text                         *
*&   PV      P V R S Varma    07-May-2003 Initial Version             *
*&   DU      D.Usui           2004/02/26   CR No. 1432                 *
*&   DU      D.Usui           2004/03/08   CR No. 1447                 *
*&   DU      D.Usui           2004/05/06   CR No. 1591                 *
                        Constants
CONSTANTS:
c_werks   LIKE ekpo-werks VALUE 'JP01',    "Plant code - Sasayama plant
c_id      LIKE thead-tdid VALUE 'F02',     "Text ID for Info record
c_object LIKE thead-tdobject VALUE 'EKPO',"Object of text for info rec
*c_zzjp_r1 LIKE marc-zzjp_re1 VALUE 'GMP', "Goods in plan- Domestic
*c_zzjp_r2 LIKE marc-zzjp_re1 VALUE 'GMPI', "Import sales order document
c_plus    TYPE c VALUE '',                "Holding '' sign
c_spras   LIKE makt-spras VALUE 'J',       "Language key Japan
*c_device(7)    type c value 'PRINTER',    "Device type
c_form(16)     TYPE c VALUE 'ZJPMPU305', "Form name
c_ele_gmp(4)   TYPE c VALUE 'GMP',        "GMP Text element
c_ele_gmpi(4) TYPE c VALUE 'GMPI',       "GMPI Text element
add begin CR1432
c_ele_bgmp(4) TYPE c VALUE 'BGMP',       "BGMP
c_ele_bgmpi(5) TYPE c VALUE 'BGMPI',      "BGMPI
add end CR1432
c_function(3) TYPE c VALUE 'SET',        "Function
c_type(4)      TYPE c VALUE 'BODY',       "Window area in main window
c_win_head(7) TYPE c VALUE 'HEADING',    "Heading window
c_win_shead(7) TYPE c VALUE 'SUBHEAD',    "sub heading window
c_win_fot1(7) TYPE c VALUE 'FOOTER1',    "Footer 1 window
c_win_main(4) TYPE c VALUE 'MAIN',       "Main window
c_comd(8)      TYPE c VALUE 'NEW-PAGE',   "New-page command
c_zar TYPE ekko-bsart VALUE 'ZAR',
c_x            TYPE c VALUE 'X',          "Indicator for print options
c_f            TYPE c VALUE 'F',          "Indicator for Purchase Order
add begin CR1591
Deletion indicator in purchasing document
c_loekz(1)     TYPE c VALUE 'L',
For ranges tables
c_sign_i(1)    TYPE c VALUE 'I',          "Sign(include)
c_op_eq(2)     TYPE c VALUE 'EQ',         "Option(=)
Confirmation category
c_ebtyp_ab(2) TYPE c VALUE 'AB',         "Order acknowledgment
add end CR1591
c_la(2)        TYPE c VALUE 'LA'.         "Indicator for Inbound deliver
                      Database Tables
                    Vaiables / Internal tables                       *
Internal table to store PO information
Not used after CR1591
DATA: BEGIN OF t_purc OCCURS 0,
         ebeln LIKE eket-ebeln, "Purchasing Document Number
         ebelp LIKE eket-ebelp, "Item Number of Purchasing Document
         eindt LIKE eket-eindt, "Item delivery date
         menge LIKE eket-menge, "Scheduled quantity
         charg LIKE eket-charg, "Batch number
         matnr LIKE ekpo-matnr, "Material code
         werks LIKE ekpo-werks, "Plant
         meins LIKE ekpo-meins, "Unit of measure
         lifnr LIKE ekko-lifnr, "Vendor number
      END OF t_purc.
Internal table to store material description.
DATA: BEGIN OF t_makt OCCURS 0,
        matnr LIKE makt-matnr, "Material code
        maktx LIKE makt-maktx, "Material description
      END OF t_makt.
Internal table for storage of final EKET data
DATA: BEGIN OF t_eket OCCURS 0,
         ebeln LIKE eket-ebeln, "Purchasing Document Number
         ebelp LIKE eket-ebelp, "Item Number of Purchasing Document
         ebelp_ex(6) TYPE n,    "Extended ebelp with length 6
         eindt LIKE eket-eindt, "Item delivery date
         menge LIKE eket-menge, "Scheduled quantity
         dabmg LIKE ekes-dabmg, " Delivered Quantity
         charg LIKE eket-charg, "Batch number
         matnr LIKE ekpo-matnr, "Material code
         werks LIKE ekpo-werks, "Plant
         maktx LIKE makt-maktx, "Material Description-- jp check
         etens LIKE ekes-etens, "Sequence Number
         meins LIKE ekpo-meins, "Unit of measure
         lifnr LIKE ekko-lifnr, "Vendor number
         vbeln LIKE ekes-vbeln,
         vbelp LIKE ekes-vbelp,
         vpnam(40) TYPE c,      "Vendor product name
      END OF t_eket.
Internal table for extraction of data from EKES
Not used after CR1591
DATA: BEGIN OF t_ekes OCCURS 0,
         ebeln LIKE ekes-ebeln, "Purchasing Document Number
         ebelp LIKE ekes-ebelp, "Item Number of Purchasing Document
         etens LIKE ekes-etens, "Sequence No
         eindt LIKE ekes-eindt, "Item delivery date
         menge LIKE ekes-menge, "Scheduled Quantity
         dabmg LIKE ekes-dabmg, " delivered quantity
         vbeln LIKE ekes-vbeln,
         vbelp LIKE ekes-vbelp,
         mark TYPE c,
      END OF t_ekes.
Internal table for extraction of data from EKES
Not used after CR1591
DATA: BEGIN OF t_ekes_temp OCCURS 0,
         ebeln LIKE ekes-ebeln, "Purchasing Document Number
         ebelp LIKE ekes-ebelp, "Item Number of Purchasing Document
         etens LIKE ekes-etens, "Sequence No
         eindt LIKE ekes-eindt, "Item delivery date
         menge LIKE ekes-menge, "Scheduled Quantity
      END OF t_ekes_temp.
Internal table for storing data from MLGN table.
DATA: BEGIN OF t_mlgn OCCURS 0,
         matnr LIKE mlgn-matnr, "material code
         lhmg1 LIKE mlgn-lhmg1, "Standard pallet size
         lhme1 LIKE mlgn-lhme1, "Unit of measure
         lety1 LIKE mlgn-lety1, "tower
         ltkze LIKE mlgn-ltkze, "Storage location
      END OF t_mlgn.
Internal table for storing data from MARM table.
DATA: BEGIN OF t_marm OCCURS 0,
         matnr LIKE marm-matnr, "material code
         umrez LIKE marc-zzjp_cas_size, "Std package unit
         meins LIKE ekpo-meins, "alternate unit
      END OF t_marm.
Internal table for storing data from MARC table.
DATA: BEGIN OF t_marc OCCURS 0,
         matnr LIKE marc-matnr,               "Material code
         zzjp_nyu_sop LIKE marc-zzjp_nyu_sop, "Product Std number
         zzjp_dos_frm LIKE marc-zzjp_dos_frm, "Dosage form
         zzjp_aprn     LIKE marc-zzjp_aprn,   "Apperance
         zzjp_re1     LIKE marc-zzjp_re1,     "Heading
      END OF t_marc.
Internal table for storing data from lfa1 table.
DATA: BEGIN OF t_lfa1 OCCURS 0,
         lifnr LIKE lfa1-lifnr, "Vendor code
         name1 LIKE lfa1-name1, "Vendor name
      END OF t_lfa1.
Internal table for Storing data from LIPS table.
DATA: BEGIN OF t_lips OCCURS 0,
         vbeln LIKE lips-vbeln, "Delivery document no
         posnr LIKE lips-posnr, "Item number for Delivery document
         charg LIKE lips-charg, "Batch number
         lichn LIKE lips-lichn, "Vendor Batch number
      END OF t_lips.
Internal table for storing the final display data.
DATA: BEGIN OF t_display OCCURS 0,
        g_checkbox type c,      "check box for selection of records
         ebeln LIKE ekes-ebeln,      "Purchasing Document Number
         ebelp LIKE ekes-ebelp,      "Item Number of Purchasing Document
         etens LIKE ekes-etens,      "Sequence No
         eindt LIKE eket-eindt,      "Item delivery date
         menge LIKE eket-menge,      "Scheduled Quantity
         vpnam(40) TYPE c,          "Vendor product name
         lifnr LIKE ekko-lifnr,      "Vendor code
         name1 LIKE lfa1-name1,      "Vendor name
         meins LIKE ekpo-meins,      "Unit of measure
         matnr LIKE ekpo-matnr,      "Material Number
         maktx LIKE makt-maktx,     "Material Description-- jp check
         charg LIKE lips-charg,      "Batch number
         lichn LIKE lips-lichn,      "Vendor Batch number
         lhmg1 LIKE mlgn-lhmg1,     "standard pallet size
         lhme1 LIKE mlgn-lhme1,      "Unit of standard pallet
         lety1 LIKE mlgn-lety1,     "tower
         ltkze LIKE mlgn-ltkze,      "Storage location
         umrez LIKE marc-zzjp_cas_size,      "Std package unit
         meinh LIKE ekpo-meins,      "alternate unit
         zzjp_nyu_sop LIKE marc-zzjp_nyu_sop,      "Product Std number
         zzjp_dos_frm LIKE marc-zzjp_dos_frm,      "Dosage form
         zzjp_aprn     LIKE marc-zzjp_aprn,          "Apperance
         zzjp_re1     LIKE marc-zzjp_re1,           "Heading
         std_pac_no(13) TYPE n,            "Std receipt package no
         tot_std_pt(13) TYPE n,             "Total no of std pallets
add begin CR1447
Add new field 'Goods-in-order','Item' for goods in plan list
         vbeln like ekes-vbeln,     "Goods-in-order
         vbelp like ekes-vbelp,     "Item
add end CR1447
      END OF t_display.
Internal table for storing the final display data -Goods in order list
DATA: BEGIN OF t_display1 OCCURS 0,
         ebeln LIKE ekes-ebeln,      "Purchasing Document Number
         ebelp LIKE ekes-ebelp,      "Item Number of Purchasing Document
         etens LIKE ekes-etens,      "Sequence No
         eindt LIKE eket-eindt,      "Item delivery date
         menge LIKE eket-menge,      "Scheduled Quantity
         vpnam(40) TYPE c,          "Vendor product name
         lifnr LIKE ekko-lifnr,      "Vendor code
         name1 LIKE lfa1-name1,      "Vendor name
         meins LIKE ekpo-meins,      "Unit of measure
         matnr LIKE ekpo-matnr,      "Material Number
         maktx LIKE makt-maktx,     "Material Description-- jp check
         charg LIKE lips-charg,      "Batch number
         lichn LIKE lips-lichn,      "Vendor Batch number
         lhmg1 LIKE mlgn-lhmg1,     "standard pallet size
         lhme1 LIKE mlgn-lhme1,      "Unit of standard pallet
         lety1 LIKE mlgn-lety1,     "tower
         ltkze LIKE mlgn-ltkze,      "Storage location
         umrez LIKE marc-zzjp_cas_size,      "Std package unit
         meinh LIKE ekpo-meins,      "alternate unit
         zzjp_nyu_sop LIKE marc-zzjp_nyu_sop,      "Product Std number
         zzjp_dos_frm LIKE marc-zzjp_dos_frm,      "Dosage form
         zzjp_aprn     LIKE marc-zzjp_aprn,          "Apperance
         zzjp_re1     LIKE marc-zzjp_re1,           "Heading
         std_pac_no(13) TYPE n,            "Std receipt package no
         tot_std_pt(13) TYPE n,             "Total no of std pallets
      END OF t_display1.
Internal table for storing the final display data - Goods in plan list
DATA: BEGIN OF t_display2 OCCURS 0,
         ebeln LIKE ekes-ebeln,      "Purchasing Document Number
         ebelp LIKE ekes-ebelp,      "Item Number of Purchasing Document
         etens LIKE ekes-etens,      "Sequence No
         eindt LIKE eket-eindt,      "Item delivery date
         menge LIKE eket-menge,      "Scheduled Quantity
         name1 LIKE lfa1-name1,      "Vendor name
         meins LIKE ekpo-meins,      "Unit of measure
         matnr LIKE ekpo-matnr,      "Material Number
         maktx LIKE makt-maktx,     "Material Description-- jp check
         charg LIKE lips-charg,      "Batch number
         lichn LIKE lips-lichn,      "Vendor Batch number
         lhmg1 LIKE mlgn-lhmg1,     "standard pallet size
         lety1 LIKE mlgn-lety1,     "tower
         ltkze LIKE mlgn-ltkze,      "Storage location
         tot_std_pt(13) TYPE n,             "Total no of std pallets
add begin CR1447
Add new field 'Goods-in-order','Item' for goods in plan list
         vbeln like ekes-vbeln,     "Goods-in-order
         vbelp like ekes-vbelp,     "Item
add end CR1447
      END OF t_display2.
add begin CR1591
RANGES: r_matnr FOR mara-matnr,   "for p_matnr
        r_ebeln FOR ekpo-ebeln.   "for p_ebeln
add end CR1591
DATA: line TYPE i.            " line number
DATA: g_checkbox TYPE c.      "check box for selection of records
DATA: g_tab LIKE sy-index.    "variable to hold index
DATA g_tabix LIKE sy-tabix. "holder for table index
Printing Options.
DATA: lw_pr_options LIKE itcpo.
*lw_pr_options-tddest = 'SA03'.      " Print Device Name
lw_pr_options-tdpreview = 'X'.      " Print Preview
lw_pr_options-tdnewid = 'X'.        " New Request
lw_pr_options-tdlifetime = 2.       " Retention in Spool
                        Selection Screen                             *
SELECTION-SCREEN BEGIN OF BLOCK blk1 WITH FRAME.
SELECT-OPTIONS:
s_date FOR sy-datum DEFAULT sy-datum. " Search period.
PARAMETERS:
p_matnr LIKE mara-matnr,               " Material code
p_ebeln LIKE ekpo-ebeln.               " Purchase Document No
SELECTION-SCREEN END OF BLOCK blk1.
                   Selection Screen Checks                           *
AT SELECTION-SCREEN.
IF ( s_date-low IS INITIAL ) AND
     ( p_matnr IS INITIAL ) AND
     ( p_ebeln IS INITIAL ).
    MESSAGE e000 WITH 'Entry Must in atleast one of the Fields'(t00).
ENDIF.
IF ( NOT p_matnr IS INITIAL ) AND
     ( s_date IS INITIAL )      AND
     ( p_ebeln IS INITIAL ).
    MESSAGE e000 WITH 'Date should also be Entered'(t01).
ENDIF.
del begin CR1591
This check is not found in original FS
IF ( NOT p_matnr IS INITIAL ) AND
    ( s_date IS INITIAL ) AND
    ( NOT p_ebeln IS INITIAL ).
   MESSAGE e000 WITH 'Date should also be Entered'(t01).
ENDIF.
del end CR1591
               Validations for Data selection                        *
del begin CR1591
Waste check
IF ( NOT s_date IS INITIAL ) AND
    ( p_matnr IS INITIAL ) AND
    ( p_ebeln IS INITIAL ).
   PERFORM f_check_date_in_eket.
ENDIF.
IF ( NOT s_date IS INITIAL ) AND
    ( NOT p_matnr IS INITIAL ) AND
    ( p_ebeln IS INITIAL ).
   PERFORM f_check_matnr_in_plant.
   PERFORM f_check_matnr_in_ekpo.
   PERFORM f_check_date_in_eket.
   PERFORM f_check_matnr_in_plant.
   PERFORM f_check_matnr_in_ekpo.
ENDIF.
IF ( NOT s_date IS INITIAL ) AND
    ( NOT p_matnr IS INITIAL ) AND
    ( NOT p_ebeln IS INITIAL ).
   PERFORM f_check_matnr_in_plant.
   PERFORM f_check_matnr_in_ekpo.
   PERFORM f_check_date_in_eket.
   PERFORM f_check_ebeln_in_ekpo.
   PERFORM f_check_werks_in_ekpo.
ENDIF.
IF ( NOT p_ebeln IS INITIAL ) AND
    ( NOT s_date IS INITIAL ) AND
    ( p_matnr IS INITIAL ).
   PERFORM f_check_date_in_eket.
   PERFORM f_check_ebeln_in_ekpo.
   PERFORM f_check_werks_in_ekpo.
ENDIF.
IF ( NOT p_ebeln IS INITIAL ) AND
    ( s_date IS INITIAL ) AND
    ( p_matnr IS INITIAL ).
   PERFORM f_check_ebeln_in_ekpo.
   PERFORM f_check_werks_in_ekpo.
ENDIF.
del end CR1591
                     Data selection from Tables                      *
START-OF-SELECTION.
SET PF-STATUS 'SELECT'.
add begin CR1591
Set ranges tables
PERFORM set_ranges.
add end CR1591
mod begin CR1591
**Selection of PO data from EKET into internal table t_purc.
PERFORM f_select_eket.
**Selection of corresponding PO data for EKET from EKES into t_ekes.
PERFORM f_select_ekes.
**Selection of material desc from MAKT table into T_makt.
PERFORM f_select_makt.
**Copy the contents of t_purc and t_makt into t_eket table.
PERFORM f_move_eket.
**Replace the corresponding entries of t_eket with t_ekes.
PERFORM f_update_eket.
Selection of PO data from EKET into internal table T_EKET.
PERFORM f_select_eket2.
Selection of corresponding PO data from EKES appending to T_EKET.
PERFORM f_select_ekes2.
Selection of material desc from MAKT table into T_MAKT.
PERFORM f_select_makt2.
mod end CR1591
*Selection of vendor product name.
PERFORM f_select_vpnam.
del begin CR1591
No need
**copy t_eket-ebelp into temporary variable.
PERFORM f_copy_ebelp.
del end CR1591
*selection of data from MLGN table into t_mlgn internal table
PERFORM f_select_mlgn.
*selection of data from marm table into t_marm internal table
PERFORM f_select_marm.
*selection of data from marc table into t_marc internal table
PERFORM f_select_marc.
*selection of data from lfa1 table into t_lfa1 internal table
PERFORM f_select_lfa1.
*Selection of data from LIPS table into t_lips internal table
PERFORM f_select_lips.
del begin CR1591
Don't display list screen when no data exists
*END-OF-SELECTION.
del end CR1591
*lines = sy-linno - 1.
*Collection of data into the final display internal table t_Display
PERFORM f_collect_final.
*Display the contents of t_display as a simple List
PERFORM f_list_display.
AT USER-COMMAND.
PERFORM f_select_layout.
INCLUDE zjpmipu315.
INCLUDE zjpmipu316.
*&      Form f_check_MATNR_in_plant
     This Routine is to check if the the selected material code is
     available in the plant 'JP01'.
FORM f_check_matnr_in_plant.
DATA: l_matnr LIKE mara-matnr.
SELECT matnr UP TO 1 ROWS FROM marc
                   INTO l_matnr
                   WHERE
                   matnr = p_matnr AND
                   werks = c_werks.
ENDSELECT.
IF l_matnr IS INITIAL.
    MESSAGE e000 WITH
    'The material is not available in '(t02) c_werks 'plant'(t20).
ENDIF.
ENDFORM.                    " f_check_MATNR_in_plant
*&      Form f_check_EBELN_in_EKPO
      This Routine is to check if the Purchase order number selected
      is existing or not and if it exists, check if it is related to
      the plant 'JP01'.
FORM f_check_ebeln_in_ekpo.
DATA: l_ebeln LIKE ekpo-ebeln.
SELECT ebeln UP TO 1 ROWS FROM ekpo
                INTO l_ebeln
                WHERE
                ebeln = p_ebeln AND
                werks = c_werks.
ENDSELECT.
IF l_ebeln IS INITIAL.
    MESSAGE e000 WITH
    'PO not available or not related to '(t03) c_werks 'plant'(t21).
ENDIF.
ENDFORM.                    " f_check_EBELN_in_EKPO
*&      Form f_check_matnr_in_ekko
      This routine is to check if any PO exist for the selected
      Material code.
FORM f_check_matnr_in_ekpo.
DATA: l_matnr LIKE ekpo-matnr.
SELECT matnr UP TO 1 ROWS FROM ekpo
                   INTO l_matnr
                   WHERE
                   matnr = p_matnr.
ENDSELECT.
IF l_matnr IS INITIAL.
    MESSAGE e000 WITH
    'PO does not exist for the material no'(t04) p_matnr.
ENDIF.
ENDFORM.                    " f_check_matnr_in_ekpo
*&      Form f_check_date_in_eket
      This routine is to check if any purchase order exists
      with the selected
FORM f_check_date_in_eket.
DATA: l_eindt LIKE eket-eindt.
SELECT eindt UP TO 1 ROWS FROM eket
                   INTO l_eindt
                   WHERE
                   eindt IN s_date.
ENDSELECT.
IF l_eindt IS INITIAL.
    MESSAGE e000 WITH
   'No PO exist with the selected delivery date '(t05).
ENDIF.
ENDFORM.                    " f_check_date_in_eket
*&      Form f_check_werks_in_ekpo
      This Routine is to check if the selected purchase order
      is associated with the plant JP01
FORM f_check_werks_in_ekpo.
DATA: l_ebeln LIKE ekpo-ebeln.
SELECT ebeln UP TO 1 ROWS FROM ekpo
                   INTO l_ebeln
                   WHERE
                   werks = c_werks.
ENDSELECT.
IF l_ebeln IS INITIAL.
    MESSAGE e000 WITH
    'The selected P0 is not relevant to '(t06) c_werks 'plant'(t22).
ENDIF.
ENDFORM.                    " f_check_werks_in_ekpo
*&      Form f_select_eket
      Routine to collect data from EKET, EKPO, MAKT, EKKO tables
      using inner join and store the data into internal table
      t_PURC. The data selection is based on the selection screen's
      input.
FORM f_select_eket.
IF ( NOT s_date-low IS INITIAL ) AND
     ( p_matnr IS INITIAL ) AND
     ( p_ebeln IS INITIAL ).
    SELECT
            eket~ebeln
            eket~ebelp
            eket~eindt
            eket~menge
            eket~charg
            ekpo~matnr
            ekpo~werks
            ekpo~meins
            ekko~lifnr
     INTO TABLE t_purc
    FROM
             ( ( eket INNER JOIN ekko ON
              eketebeln = ekkoebeln )   INNER JOIN ekpo ON
              eketebelp = ekpoebelp AND
              ekpoebeln = ekkoebeln )
WHERE
            eket~eindt IN s_date AND
            ekpo~werks = c_werks AND
            ekpo~elikz NE c_x AND
            ekko~bstyp EQ c_f AND
            ekko~bsart NE c_zar.
ELSEIF ( NOT s_date-low IS INITIAL ) AND
     ( NOT p_matnr IS INITIAL ) AND
     ( p_ebeln IS INITIAL ).
    SELECT
            eket~ebeln
            eket~ebelp
            eket~eindt
            eket~menge
            eket~charg
            ekpo~matnr
            ekpo~werks
            ekpo~meins
            ekko~lifnr
     INTO TABLE t_purc
    FROM
             ( ( eket INNER JOIN ekko ON
              eketebeln = ekkoebeln )   INNER JOIN ekpo ON
              eketebelp = ekpoebelp AND
              ekpoebeln = ekkoebeln )
WHERE
            eket~eindt IN s_date AND
            ekpo~matnr = p_matnr AND
            ekpo~werks = c_werks AND
            ekpo~elikz NE c_x AND
            ekko~bstyp EQ c_f AND
            ekko~bsart NE c_zar.
ELSEIF ( NOT s_date-low IS INITIAL ) AND
     ( NOT p_matnr IS INITIAL ) AND
     ( NOT p_ebeln IS INITIAL ).
    SELECT
            eket~ebeln
            eket~ebelp
            eket~eindt
            eket~menge
            eket~charg
            ekpo~matnr
            ekpo~werks
            ekpo~meins
            ekko~lifnr
     INTO TABLE t_purc
    FROM
             ( ( eket INNER JOIN ekko ON
              eketebeln = ekkoebeln )   INNER JOIN ekpo ON
              eketebelp = ekpoebelp AND
              ekpoebeln = ekkoebeln )
WHERE
            eket~eindt IN s_date AND
            ekpo~matnr = p_matnr AND
            ekpo~ebeln = p_ebeln AND
            ekpo~werks = c_werks AND
            ekpo~elikz NE c_x AND
            ekko~bstyp EQ c_f AND
            ekko~bsart NE c_zar.
ELSEIF ( s_date-low IS INITIAL ) AND
     ( p_matnr IS INITIAL ) AND
     ( NOT p_ebeln IS INITIAL ).
    SELECT
            eket~ebeln
            eket~ebelp
            eket~eindt
            eket~menge
            eket~charg
            ekpo~matnr
            ekpo~werks
            ekpo~meins
            ekko~lifnr
     INTO TABLE t_purc
    FROM
             ( ( eket INNER JOIN ekko ON
              eketebeln = ekkoebeln )   INNER JOIN ekpo ON
              eketebelp = ekpoebelp AND
              ekpoebeln = ekkoebeln )
WHERE
            ekpo~ebeln = p_ebeln AND
            ekpo~werks = c_werks AND
            ekpo~elikz NE c_x AND
            ekko~bstyp EQ c_f AND
            ekko~bsart NE c_zar.
ELSEIF ( NOT s_date-low IS INITIAL ) AND
     ( p_matnr IS INITIAL ) AND
     ( NOT p_ebeln IS INITIAL ).
    SELECT
            eket~ebeln
            eket~ebelp
            eket~eindt
            eket~menge
            eket~charg
            ekpo~matnr
            ekpo~werks
            ekpo~meins
            ekko~lifnr
     INTO TABLE t_purc
    FROM
             ( ( eket INNER JOIN ekko ON
              eketebeln = ekkoebeln )   INNER JOIN ekpo ON
              eketebelp = ekpoebelp AND
              ekpoebeln = ekkoebeln )
WHERE
            eket~eindt IN s_date AND
            ekpo~ebeln = p_ebeln AND
            ekpo~werks = c_werks AND
            ekpo~elikz NE c_x AND
            ekko~bstyp EQ c_f AND
            ekko~bsart NE c_zar.
ENDIF.
IF sy-subrc <> 0.
   MESSAGE s000 WITH 'Data not found'(t07).
   LEAVE LIST-PROCESSING.
ELSE.
SORT t_purc.
ENDIF.
ENDFORM.                    " f_select_eket
*&      Form f_select_makt
      Routine to select the material description for all the
      materials present in T_purc table
FORM f_select_makt.
DATA: l_t_makt(4) TYPE c VALUE 'MAKT'.
SELECT
      matnr
      maktx
FROM
      makt
INTO TABLE t_makt
      FOR ALL ENTRIES IN t_purc
WHERE
     matnr = t_purc-matnr AND
     spras = c_spras.
IF sy-subrc <> 0.
    MESSAGE s000 WITH
      'Relevant data not found in'(t09) l_t_makt 'table'(t23).
ELSE.
    SORT t_makt.
ENDIF.
ENDFORM.                    " f_select_makt
*&      Form f_move_eket
      Routine to join data in T_PURC and T_MAKT tables into
      internal table T_MAKT.
FORM f_move_eket.
LOOP AT t_purc.
    t_eket-ebeln = t_purc-ebeln.
    t_eket-ebelp = t_purc-ebelp.
    t_eket-eindt = t_purc-eindt.
    t_eket-menge = t_purc-menge.
    t_eket-charg = t_purc-charg.
    t_eket-matnr = t_purc-matnr.
    t_eket-werks = t_purc-werks.
    t_eket-meins = t_purc-meins.
    t_eket-lifnr = t_purc-lifnr.
    READ TABLE t_makt WITH KEY matnr = t_purc-matnr
                                     BINARY SEARCH.
    IF sy-subrc = 0.
      t_eket-maktx = t_makt-maktx.
    ENDIF.
    APPEND t_eket.
    CLEAR t_eket.
ENDLOOP.
ENDFORM.                    " f_move_eket
*&      Form f_select_ekes
      Routine to select EKES data for all corresponding entries
      of T_EKET.
FORM f_select_ekes.
DATA: l_tabix TYPE i.
IF NOT s_date IS INITIAL.
   SELECT
           ebeln
           ebelp
           etens
           eindt
           menge
    INTO   TABLE t_ekes
     FROM
           ekes
    WHERE
           eindt IN s_date.
ELSE.
DESCRIBE TABLE t_purc LINES l_tabix.
IF l_tabix GT 0.
    SELECT
            ebeln
            ebelp
            etens
            eindt
            menge
            dabmg
            vbeln
            vbelp
     FROM
            ekes
     INTO   TABLE t_ekes
           FOR ALL ENTRIES IN t_eket
            FOR ALL ENTRIES IN t_purc
     WHERE
            ebeln = t_purc-ebeln AND
            ebelp = t_purc-ebelp AND
            eindt IN s_date.
          AND ebeln eq p_ebeln.
       and matnr in p_matnr.
ENDIF.
CLEAR l_tabix.
IF NOT s_date IS INITIAL AND NOT p_ebeln IS INITIAL.
    SELECT
            ekes~ebeln
            ekes~ebelp
            ekes~etens
            ekes~eindt
            ekes~menge
            ekes~dabmg
   APPENDING TABLE t_ekes
      FROM ekes
     WHERE
            eindt IN s_date AND
            ebeln EQ p_ebeln AND
            ebtyp EQ c_la.
ELSEIF NOT s_date IS INITIAL AND p_ebeln IS INITIAL.
    SELECT
                ekes~ebeln
                ekes~ebelp
                ekes~etens
                ekes~eindt
                ekes~menge
                ekes~dabmg
       APPENDING TABLE t_ekes
          FROM ekes
         WHERE
                eindt IN s_date AND
           ebeln EQ p_ebeln AND
                ebtyp EQ c_la.
ELSEIF s_date IS INITIAL AND NOT p_ebeln IS INITIAL.
    SELECT
                ekes~ebeln
                ekes~ebelp
                ekes~etens
                ekes~eindt
                ekes~menge
                ekes~dabmg
       APPENDING TABLE t_ekes
          FROM ekes
         WHERE
           eindt IN s_date AND
                ebeln EQ p_ebeln AND
                ebtyp EQ c_la.
ENDIF.
IF sy-subrc = 0.
    SORT t_ekes.
ENDIF.
IF NOT t_ekes[] IS INITIAL.
    t_ekes_temp[] = t_ekes[].
    SORT t_ekes_temp BY ebeln ebelp.
    DELETE ADJACENT DUPLICATES FROM t_ekes_temp COMPARING ebeln ebelp.
    LOOP AT t_ekes_temp.
      READ TABLE t_purc WITH KEY ebeln = t_ekes_temp-ebeln
                                 ebelp = t_ekes_temp-ebelp.
      IF sy-subrc NE 0.
        CLEAR t_purc.
        SELECT SINGLE
              eket~ebeln
              eket~ebelp
              eket~eindt
              eket~menge
              eket~charg
              ekpo~matnr
              ekpo~werks
              ekpo~meins
              ekko~lifnr
       INTO CORRESPONDING FIELDS OF t_purc
      FROM
               ( ( eket INNER JOIN ekko ON
                eketebeln = ekkoebeln )   INNER JOIN ekpo ON
                eketebelp = ekpoebelp AND
                ekpoebeln = ekkoebeln )
    WHERE
             eket~ebeln = t_ekes_temp-ebeln
      AND    eket~ebelp = t_ekes_temp-ebelp
      AND    ekpo~elikz NE c_x
      AND    ekko~bstyp EQ c_f
      AND    ekko~bsart NE c_zar.
        IF sy-subrc EQ 0.
          APPEND t_purc.
          CLEAR t_purc.
        ENDIF.
      ENDIF.
    ENDLOOP.
ENDIF.
REFRESH: t_ekes_temp, t_ekes.
CLEAR: t_ekes_temp, t_ekes.
Once the header is filled up get the details from EKES
SELECT ebeln ebelp etens eindt menge dabmg vbeln vbelp
                     INTO TABLE t_ekes
                     FROM ekes
                     FOR ALL ENTRIES IN t_purc
               WHERE ebeln EQ t_purc-ebeln.
Mark the entries as 'X' which falls in the date range
LOOP AT t_ekes.
    IF t_ekes-eindt IN s_date.
      t_ekes-mark = 'X'.
      MODIFY t_ekes INDEX sy-tabix TRANSPORTING mark.
    ENDIF.
ENDLOOP.
SORT t_ekes BY ebeln ebelp ASCENDING mark DESCENDING.
Delete the entries from eket if no entries in EKES falls in the period
LOOP AT t_purc.
    l_tabix = sy-tabix.
    READ TABLE t_ekes WITH KEY ebeln = t_purc-ebeln
                               ebelp = t_purc-ebelp.
    IF sy-subrc EQ 0.
      IF t_ekes-mark NE 'X'.
        DELETE t_purc INDEX l_tabix.
      ENDIF.
    ENDIF.
ENDLOOP.
delete the entries from EKES which do not fall in the specified period
DELETE t_ekes WHERE mark NE 'X'.
ENDFORM.                    " f_select_ekes
*&      Form f_update_eket
      Routine to substitute relevant t_eket entries with that of
      t_ekes entries.It does not modify the remaining entries for
      for which the corresponding values in t_ekes doesnot exist.
FORM f_update_eket.
DATA: BEGIN OF lt_temp_eket OCCURS 0,
           ebeln LIKE eket-ebeln, "Purchasing Document Number
           ebelp LIKE eket-ebelp, "Item Number of Purchasing Document
           eindt LIKE eket-eindt, "Item delivery date
           menge LIKE eket-menge, "Scheduled quantity
           dabmg LIKE ekes-dabmg, " Delivered quantity
           matnr LIKE ekpo-matnr, "Material code
           maktx LIKE makt-maktx, "Material Description-- jp check
           etens LIKE ekes-etens, "Sequence Number
           meins LIKE ekpo-meins, "Unit of measure
           lifnr LIKE ekko-lifnr, "Vendor number
           charg LIKE eket-charg, " Batch number   Added by PD 08/08/03
           vbeln LIKE ekes-vbeln,
           vbelp LIKE ekes-vbelp,
        END OF lt_temp_eket,
        l_menge LIKE ekes-menge.
LOOP AT t_eket.
    LOOP AT t_ekes WHERE ebeln = t_eket-ebeln
                    AND ebelp = t_eket-ebelp.
Added by PD 08/08/03
      MOVE t_eket-charg TO lt_temp_eket-charg.
addition ends
      MOVE t_eket-ebeln TO lt_temp_eket-ebeln.
      MOVE t_eket-ebelp TO lt_temp_eket-ebelp.
      MOVE t_eket-meins TO lt_temp_eket-meins.
      CLEAR l_menge.
      l_menge = t_ekes-menge - t_ekes-dabmg.
      IF l_menge LE 0.
        CONTINUE.
      ELSE.
        MOVE l_menge TO lt_temp_eket-menge.
      ENDIF.
      MOVE t_ekes-eindt TO lt_temp_eket-eindt.
      MOVE t_ekes-etens TO lt_temp_eket-etens.
      MOVE t_eket-lifnr TO lt_temp_eket-lifnr.
      MOVE t_eket-maktx TO lt_temp_eket-maktx.
      MOVE t_eket-matnr TO lt_temp_eket-matnr.
      MOVE t_ekes-vbeln TO lt_temp_eket-vbeln.
      MOVE t_ekes-vbelp TO lt_temp_eket-vbelp.
      APPEND lt_temp_eket.
      CLEAR lt_temp_eket.
      CLEAR t_ekes.
    ENDLOOP.
    IF sy-subrc NE 0.
Added by PD 08/08/03
      MOVE t_eket-charg TO lt_temp_eket-charg.
addition ends
      MOVE t_eket-ebeln

Dear
Problem No 1 : we are working in a process industries with three plants each of them have three order type. we have define MRP group in "OPPR" then assign each MRP group to Orde types in "OPPE". Now the problem is whn i convert plan order in process order for any material systme automaticaly pick the order type PIi01.
Answer :
1.Please check the OPPR -Plant and MRP group -Select Order Type Button -Check what Order Type you have assinged here ( PI01( May be the default Process Order Type )
2.If you are maintaing MRP group ( 0001 or 0002) , did you asisng the same in MRP1 view ?? because
3.Did you maintain the similar Order type in OPKP -Define Production Scheduling Profile ? -This has highest priority .
4.Did you maintain correct order type in OPJH-Maintain Order Type ??
Refer the expert comments on the same issue : Strategy group to define production order type
Problem No 2: 2nd Problem is system system is not creating plan order for prrevios dates. say i enter PIR for month of november from first november to 30th november and run MRP on 29th the sytem create plan order on 30th of november with exception message 30.
Answer : You can plan the order in back dated , if you maitain Satrt date in the Past optiuon in OPU3/OPU5-Define Scheduling parameters .Goto OPU3 -Select the Order Type -Double click -Maintain 90-60 days in the Start Date in the past in Scheduling Control and Details scheduling tab .
Hope it helps
regards
JH

What do you need to do to your account in you have a US plan but are going to Canada for a day or two?

If you have a US plan but are occasionally going into Canada for a day or two at a time, what do you need to do to make sure you are not paying for additional calling and texting activities?

Canada plan.

Does the network extender work in "extended coverage" areas?

We are going to be at a cabin in a rural area that is in "extended 3G" / "extended digital coverage" according to the verizon coverage map (a few miles east of Arnold, CA).
As the cabin has internet (we go there every summer), will the network extender work given that it's in an extended coverage area? I usually get 0 bars when I am at the cabin and it would be nice to be able to make/receive calls on the cell phone without having to drive into town several miles away.

Hello norm_!
I'd be happy to clarify the Network Extender functionality. I looked up your Arnold, CA location, and unfortunately, the network extender will not work in this area. I apologize for the inconvenence, and I do hope you have a wonderful trip!
Thank you,
MichelleH_VZW
Follow us on Twitter @VZWSupport

Planned orders are not taking into account the processing time

Hi,
Could you please tell me why planned orders quantities are not based on processing time from the material master.
Materials was set before with 1 day in house production , no matter of lot size.
Based on routings I updated material master with processing time depending on lot size.
What is bottering me now is that planned orders are not taking into account processing time. (e.g. based on my processing time 1000 pce are produced in 3 days, but planned orders show me that 1000 pce are still need in 1 day , but it can not be produced in 1 day ).
what did I miss?
Thanks a lot for any information!

Hello Simona
The in house production time from tab MRP 2 is lot size independent.
However, on tab work scheduling you can define a lot size dependent times.
Please observe that, if you have entered an in house production time, the processing time will not be considered. The F1 help of the field provides the following explanation:
You can define work scheduling times in the material master record in one of two ways:
Either you enter the in-house production time. If required, you can get the system to update this value from the routing.
Or you enter the setup, teardown, processing, and interoperation times. If you maintain these values, the system determines the in-house production time on the basis of lot size.
Therefore, if you want to consider the processing time, you should remove the in house processing time.
BR
Caetano

HT5192 I have iPhone 4Gs Although I am in a good coverage area I lose network connection and re-establish connection again

I have iPhone 4Gs
Although I am in a good coverage area
I lose network connection and re-establish connection again

Please post in the iPhone forume. This is the iPod touch forum.

Alltel plan coverage area

Similar Messages

Maybe you are looking for