Alternate share invite email link

Hello
I've been working on using HealthVault as a backend data store for patient data whereby the front end is a custom web interface, therefore I am making use of the Shell Redirect Interface. Currently I'm working on the scenario of initiating the share record
workflow using the SHARERECORD target. However I would like that the invite email that is sent redirects the user to my custom interface first rather than directly to HealthVault. The idea is that when the user arrives at my web application from the invite
link, my application would redirect to the shell interface where the user would continue as normal to create a HealthVault account and view the shared record.
Ideally I would like to provide a url to the SHARERECORD redirect which would be embedded in the invite email. Otherwise another option would be to allow my application to collect and provide the recipient information to the HealthVault SHARERECORD redirect
target.
Would either of these be possible? If not, what method would you recommend of achieving the same result?

Thanks for the reply Sean,
The Shell Redirect Interface allows me to retain the patient orientated nature of HealthVault, so I am not worried about that part.
I think I need to elaborate on the problem that I'm facing.
SCENARIO
When Tom goes to HealthVault and decides to share his record with Jane, Tom is presented with the HealthVault sharing screen where he will enter Jane's email address, an optional passcode, select which data types Jane will have access to etc. Currently when
Tom hits the 'Send Invitation' button, an email is triggered to Jane which contains a link to HealthVault to either accept or reject the invite. 
PROBLEM
The existing method (described above) would result in a HealthVault email being sent to Jane, which redirects her to HealthVault. However when the Shell Redirect (SHARERECORD target) returns to my application, it does not provide any details about to whom
the invite was sent to, therefore I cannot send my own email as suggested above (without prompting Tom to re-enter Jane's email address within my application, which wouldn't be a very good user experience).
POSSIBLE SOLUTIONS
It is at this point that one of the following would be an ideal solution:
The invitee's email address to be returned as the targetDetails when redirecting back to my application
Be able to provide a link which will be embedded in the email that HealthVault sends to the invitee as part of the SHARERECORD redirect target
Allow my application to collect some or all of the share information before providing it to the SHARERECORD redirect target
I hope this makes the issue clearer

Similar Messages

  • Change "Share" button email link default behavior of opening in Office Web App

    When staff use the "share" button to share documents. The URL link that get's emailed out defaults to opening in the browser Office Web App view. How can we change this so it defaults to opening in the client side application?
    The URL that is sent via the link is as such -  https:\\server\somelibrary\document.docx?web=1
    It's the "web=1" that is forcing the document to launch within the browser. If the URL us adjusted with the web=1 removed, it opens in the client side application as desired. How can we make this the default for any email links sent out via the
    "Share" button?
    Thanks,
    Blair

    you can customize the OOTB callout and add your custom check the below post
    http://www.learningsharepoint.com/2013/07/08/hideremovecustomize-callout-actions-in-sharepoint-2013/
    you can create your own share which sends url with no web=1 parameter
    Hope that helps|Amr Fouad|MCTS,MCPD sharePoint 2010

  • Share invitation emails

    Hello.
    I have SAP Mobile Documents SP3, rhel 6, unicode kernel, 7.4sr2.
    I have no problem with sending emails using Java Mail Service on English.
    But when I try to create invitation.html and invitation.properties on russian using utf-8 or unicode encoding for these files then I can't add members to the share.
    Also I read the documentation and found the posibility to set the charset property.
    I returned the encoding for invitation.properties and invitation.html to ANSI and tried to set property charset="text/html;charset=UTF-8" and also unable to add share members.
    I think that documentation contain mistake in the name of property "charset" - because generally it calls as "content".
    I renamed the "charset" name to "content" and tried to add members and it was succesfull. That's why I really think that documentation contain mistake.
    And finally I changed only invitation.html file - I put russian text there and set utf-8 encoding for these file.
    As a result - the server succesfully sent the email but all russian words were like ????????.
    So, my questions are:
    1. Does SAP Mobile Documents support unicode/utf-8 encoding for emails? If no - when? If yes - could you please send me all the details how to set it up?
    2. It seems to me that property "charset" in the documentation should be renamed to "content"? Is it true?
    Boris.

    You can use the Sharing.DocumentSharingManager class with the method UpdateDocumentSharingInfo method in CSOM. The delay maybe the fact that when you assign a group to share the document with, then a timer job is queued to generate an email for each user
    in the group. These are then queued to send the email out via whatever smtp server you have set up for SharePoint. This can cause some delays.
    CSOM Link:https://msdn.microsoft.com/en-us/library/office/microsoft.sharepoint.client.sharing.documentsharingmanager.updatedocumentsharinginfo.aspx
    REST Link:
    http://sharepointfieldnotes.blogspot.com/2014/09/sharing-documents-with-sharepoint-rest.html
    Blog | SharePoint Field Notes Dev Tools |
    SPFastDeploy | SPRemoteAPIExplorer

  • How to easily add Facebook, Digg, Twitter, Share (for email links) to page...

    Hello,
    I would like to add a few of those Facebook "Like", Digg, Twitter, etc. buttons to a client's page.
    I looked at Facebook and I think I can get the code there for Facebook; but, do I have to do this for each site? Or, is there someplace where I can get the code to add several of these links at once? You know the type where you click on a "like" button and a pop-up window come up where you have to add your user name and password for the service you want to connect to...
    (Sorry, I'm an old graphic designer trying to offer web services. It seems that I have to learn things all over again. So, if you could, please be a little thorough. Thank you!)

    http://www.addthis.com/

  • Share site email invitation not getting sent

    I have the issue where if anyone goes to share a site the invitation email is not making it to the user its being shared with.  If you share a document or anything else it works fine.  This is just happening for if you share a site.  Any
    ideas of what it could be?

    Hi,
    According to your post, my understanding is that you have an issue about the share feature for sending email.
    Per the previous, the issue may be related to the relay restrictions.
    However, in your environment, the share documents work fine, the relay would be worked well, anyway, you can check it to make sure it works without any issue.
    http://sharepoint.stackexchange.com/questions/74675/share-with-e-mail-invitations-not-being-sent-even-though-all-other-e-mails-wor
    Did the issue occur for other users? You can switch to other users to check whether it works.
    What’s more, you can also use other sites to narrow down whether the issue is related to the site itself.
    Thanks,
    Jason
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Jason Guo
    TechNet Community Support

  • Just bot to conver to Word.  All I get is invite to purchase again.  email links DO NOT WORK!

    HOW DO I GET STARTED?  I JUST BOUGHT TO CONVERT PDF TO WORD.  ALL I GET IS INVITE TO PURCHASE AGAIN.  EMAIL LINKS DO NOT WORK!

    Reply from Keygames.
    Hi David,
    It is a problem with the website. We are working on a solution.
    Best is to go to http://spele.nl for the time being.
    Best regards,
    Lorenzo
    Date: Sun, 17 Nov 2013 01:43:55 -0800
    From: [email protected]
    To: [email protected]
    Subject: Unable to play flash games. All I get is a white box. Does anyone have a solution?
        Re: Unable to play flash games. All I get is a white box. Does anyone have a solution?
        created by Pat Willener in Installing Flash Player - View the full discussion

  • HT201363 Can u share my the link to send rescued email address for forgotten security questions.

    Can u share me the link to send rescued email address for my forgotten security questions.

    Go to https://expresslane.apple.com ; select 'More Products and Services', then 'Apple ID'. In the next page select 'Other Apple ID Topics' then 'Forgotten Apple ID security questions' and click 'Continue'.

  • "invitation emails couldn't be sent."

    I have a 50m Keynote '09 file and I'm trying to share it on iWork.com. Here are the steps to repeat:
    1) Edit the keynote file.
    2) From the menu bar, click Share > Share via iWork.com...
    3) Since this is an update - not a new file, choose the existing file from the "Copy to iWork.com as:"
    4) The "Viewers:" box populates with all the people you've previously shared with. Currently I have 15 people. *[Note: My guess is that this is the issue -- too many people]*
    5) Click the Share button. It generates the files and uploads it to iWork.com
    6) After the long wait, I get the following error message:
    *Invitation emails couldn't be sent.*
    Try sharing the document again.
    Note: It doesn't send the invitation email, but it does post the files on iWork.com. I have to visit the presentation on the web site, then copy/paste the unique link for each individual and then send separate emails to each person I'm sharing this file with.
    Any ideas/workarounds?
    Thanks!

    Delete them out of the outbox after it tries to send them and fails.
    As for unable to send, many places that host email don't like sending emails from off their network (doing so opens their servers up for others to spoof spam off their servers).

  • Error when trying to open, edit & save the document from email link

    Hi,
    The error occurs when user tries to open the document from the email link (after the document is "shared" with them.
    The recipient has been given edit rights.  When the document is opened it is opened in read only.  The recipient will click "Edit Document" and then they receive an error
    "The file or folder name http://servername/sites/documents/Shared Documents/IT/Test/TESTfile.xlsx?NoRedirect=true' contains characters that are not permitted. Enter a different name."
    Any suggestions please.
    Thanks.

    Hi Inderjeet,
    Thank you very much for you reply.
    I tried with the LAN options, it didn't help.
    I see that in the
    http://blog.ray1.net/2007/12/file-or-folder-name-contains-characters.html it's written as the error occurs while "Creating a new site based on a custom site definition, you get the above error", which is not my case.
    Mine happens when I click on the link from the email body. An exact thread I found :
    http://social.technet.microsoft.com/Forums/systemcenter/en-US/d724a882-66cf-4515-a088-afd7d088b103/email-link-to-share-documents?forum=sharepointgeneral&prof=required
    But no solution is mentioned there as well.
    I think this is an issue with SharePoint 2013. Do you agree? I would like to invite more experts for their opinion on this please.
    Many thanks & Regards

  • My husband and I share an email address. He now wishes to have an itunes ie Apple account, but it won't let him as there is already an account with that email address- yes, of course, it's ME. How can we resolve this?

    My husband and I share an email address. he now has a new phone which requires a link with itunes; he'd also like an itunes account. However, when he tries to set up an account, he repeatedly gets told the user name  - ie our email address, is already taken. And then his attempt fails. SO surely two people with the same email address can have seperate apple accounts?

    FaceTime, Game Center, Messages: Troubleshooting sign in issues
    If still problem contact iTunes
    Apple - Support - iTunes - Contact Us

  • Failed to send invitation emails to recipients. detailed error: an error occurred while sending mail.

    I tried to send a distributed form out to myself to check the system and received this error message: failed to send invitation emails to recipients. detailed error: an error occurred while sending mail. Any idea what I may have done wrong? I am using Microsoft Outlook 2010 with Windows 8.1 OS.

    I think century link did change some settings though.
    Help menu (Alt+H) > troubleshooting information. Copy to clipboard and paste into a reply here. Then I can see what setting your using with century link and compare them to what century link provide.

  • 'Link no longer active' message when I send an email link to a file in my cloud. New to cloud, can anyone please help...?

    Hello everyone,
    I am new to the cloud. Trying to send a client a link to a design file in my cloud. But when they click the link the get an error message saying the link is no longer active. Do t understand why, can anyone help me please.

    File Sync Links that may help
    -https://forums.adobe.com/community/creative_cloud/host_sync
    -http://helpx.adobe.com/creative-cloud/kb/arent-my-files-syncing.html
    -sync and email link http://forums.adobe.com/thread/1427516?tstart=0
    -http://helpx.adobe.com/creative-cloud/kb/cannot-share-certain-types-files.html
    -Size Limits https://forums.adobe.com/thread/1488242

  • How do I copy an email link and paste it into my email?

    Just got a hand-me-down MacBook Pro. I need to send an email to someone who's posted an ad on Craigslist. How do I, a) copy the link for their email; and, b) paste it into the address field of my Outlook mail?
    If I just click on the email link in CL, the computer wants to direct me to some default email client, which I'm not using. So I want to copy and paste the address.
    Thanks.

    Care to share which OS you are using?
    From the OS Help menu:
    Copy from one document to another
    Open both documents, select the text, picture, or movie you want to copy, and then drag it to the other document.
    If you can’t drag an item from a document window, select the item and choose Edit > Copy. Then click in the other document window and choose Edit > Paste.

  • Live Meeting meeting invites contain links that are no longer accurate.

    I inherited an OCS 2007 R2 environment (yes, I know it needs to be updated) that is currently sending meeting invites with links that are no longer valid for the install portion.
    The meeting invite section says:
    Make sure the Office Live Meeting client is installed before the meeting:
    I am connecting from
    inside the Corporation network
    I am connecting from
    outside the Corporation network
    The links point to: 
    http://r.office.microsoft.com/r/rlidOCSR2?clid=1033&p1=livemeeting
    Which is no longer available.
    I have found a current site:
    https://support.office.com/en-us/article/Download-the-Microsoft-Office-Live-Meeting-2007-client-8a432d04-45ac-4762-8e7f-e715dcd0f167?ui=en-US&rs=en-US&ad=US
    How/where do I update the meeting invite information in my on-premise OCS 2007 R2 environment?
    Jason Meyer

    I Fixed mine..  This is how
    1.  Contact Blackberry Tech support and mention tis article
    http://btsc.webapps.blackberry.com/btsc/search.do?cmd=displayKC&docType=kc&externalId=KB17471
    2.  Then advise then of this solution
    Resolution: 
    Reintegrating email address to use POP instead of MSNMSP resolved issue
     Then all your issues are fixed.  Good luck

  • Email link to open oracle apex

    Hi all expert,
    Currently, my application is running in apex 4.1 oracle db 11g XE.
    How can i open oracle apex page from outside link?
    My program follow is in this way, DBMS_JOB will call a procedure to send email to user when there is a new records to user.
    The email contain a link (eg: "http://172.23.8.11:8080/apex/f?p=100:20101:::::P20101_TNO:5002001"). Once user click on the link, user should be able point to new result page.
    My current program issue is, the program will point to login page, once user click on email link. When user successfully login, the program will stay on home page instead on new result page.
    How can the program point to the new result page after successful login. [My program is use custom authentication scheme for login. And my home page is based on user login setting.]
    Anyone can give me some idea how to solve it?
    Or anyone have the example to share with me?
    Thank you in advance!
    Regards,
    monica

    Hello Monica,
    In your "Authentication scheme > Session Not Valid >", if you have specified "login page" or page 101, then try changing this to URL as
    f?p=&APP_ID.:101:&SESSION.Regards,
    Hari

Maybe you are looking for

  • Error during creation of new company

    hi     I am getting an error while trying to create new company. The error is "No matching record found (ODBC -2028)". I have created a company before but now i can't on bothe Server & Client system. thanks & regards Annu

  • How to give the application server file path in the module pool programming

    Hi,      Could somebody help me how to provide the application server file path in module pool programming once the logo is uploaded to sap system.   For eg I have imported a logo name ‘owens’ into sap system by using transaction ‘se78’; now I need t

  • Configuring Receiver mail adapter with dynamic email addresses

    Hi, I'm a newbie to XI and I have problems in configuring the Receiver mail adapter with the "Use Mail package" option selected. I am trying pickup a file (using file adapter on Sender side, picks up a simple XML file) and after mapping in XI, send t

  • How can I upgrade my iPod Touch 1st gen?

    I've found the purchase it to iOS 3.1 software thing, but I do not understand how it works. I already have the newest iTunes, but when I click on "find updates" it says that 1.1.5 is the newest available. What do I do wrong? Please do not add this li

  • Cannot enable adobe arcobat 9.4.0 please help

    While in email and want to forward or reply to an email I get this grey box in the body of the email the says this plug-in needs to be enabled. I click on it and click on enable and restart firefox and I still can't forward or reply to emails. I get