Am using hp deskjet 1050 series...am not able to print text in black ,why?

hie....am using the hp deskjet 1050 printer and scanner ....ealier i was able to print all kind of text(black and color)....but now am unable to print text in black....why is it so?

Hi,
Please go to HP Printer Assistant (you can see this in Start Menu->HP->HP 3540 Series).Select 'Set Preferences'.Go to Layout tab and select Advanced tab. Go to Document Options and select 'Black Ink Only' (for black prints only).
Colour Only doesnot makes sense. If you want to print the colour,just reset the above option.
By default, HP printer prints black area with black and color with color.
Hope this helps.

Similar Messages

Hello - am using acrobat X pro - i am not able to edit text

hello - am using acrobat X pro - i am not able to edit text

So, what exactly do you do? What do you try, what exactly do you click, select etc. There are many things you might try, and we can't see over your shoulder so I'm afraid it has to be detailed this way.

My hp deskjet 1510 series does not print when connected to my hplap top (windows Vista),

My hp deskjet 1510 series does not print when connected to my hp lap top (windows Vista), it says the printer is not active, although it is default printer, connected and on. However, it does work when connected to the (also HP) lap top (windows 8) of my husband. I did everything the hp print and scan doctor advised and also what I could find at HP support (like switch of fire walls, reinstall everything, check printpooler ec etc)... it still does nothing except that I managed to print a diagnostic print which should give information about the condition, but it only gives numbers and letters like : 11. SN = [Edited for Personal Information] Yr 12 PER = 05YR etc, that does not really help me :-). It won't print any testpages. H E L P!!!

Hello Elisabeeth,
Welcome to the HP Forums!
I understand you're unable to print using the Deskjet 1510. I will do my best to assist you! When you reinstall the HP software, did the installation state it was complete?
I would start off by following this HP document on 'Printer is offline' Message Displays on the Computer and the Printer Will Not Print. From this document, please make sure you check the connection type and the ports.
Please post your results, as I will be looking forward to hearing from you.
I worked on behalf of HP.

HP deskjet D2300 series driver not working in windows 7

This procedure is much too complicated for an average user. You know that millions of Wondow XP users are switching to Windows 7. I' sure that most of them are facing similar problems. HP should come with a user friendly solution that solves the above issues. Don't you think?
My problem remains unsolved.

Hi dvh,
Welcome to the HP Forums!
I see that your HP Deskjet D2300 series driver not working in windows 7.
Do you see any error messages with the installer? Or does it just close out and doesn't install?
In the meantime, please try using our HP Printer Install Wizard for Windows.
Hope to hear back from you, and have a great day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Error message - The HP Deskjet 1510 Series was not found

I bought the Deskjet 1514 on 19/07/15 and installed it on my relatively new laptop. It worked ok, then I did the Windows 10 upgrade on 01/08/15. I installed the updated drivers from HP for this device. What ever I do, (have uninstalled software, reinstalled at least 4 times, used the scan doctor, swapped USB cables and ports, cleaned the disk...) I just get the message The HP Deskjet 1510 series was not found, yet when aligning the ink cartridges the scanner will work but I cannot do the test scan in the scan doctor or scan anything using the HP software (which you have to do as there is no proper control panel on the actual device). As bought the device primarily as a scanner, I am not happy and just want the thing to work but haven't a clue how to proceed except to take the thing back to Tesco and get a refund and buy a Canon instead... Please can anyone help as the HP support is useless? The printer part is working fine, which makes it ridiculous.

Hey , Welcome to the HP Support Forums!
I understand that your HP Deskjet 1514 All-in-One Printer is not being detected via the USB Cable connection on your Windows 10 computer. I would like to assist you today with resolving this installation and product detection issue. Thank you for including all of the troubleshooting steps that you have attempted prior to reaching out for support. At this time I am going to have you complete some additional troubleshooting steps. We will be repeating the uninstall process for troubleshooting today as it is crucial that we have a nice clean slate to work with. Please complete all of the steps below. Please disconnect the USB Cable from your printer and computer before proceeding. Step 1: Remove Driver: 1. Click on your Start button 2. Type Programs and Features in the 'Ask me Anything' box to the right of the Start button. If you just start typing when the Start screen is open it should automatically start typing in the 'Ask me Anything' section. 3. When Programs and Features opens scroll down the list of populated programs and look for your HP Deskjet. If you see your HP Deskjet listed please click on it and choose Uninstall. Follow the onscreen prompts to complete the uninstall. 4. Next, click on the Start button and type Devices in the 'Ask me Anything' box 5. Click Devices and Printers 6. Under the Devices and Printers window look for your HP Deskjet. If the HP Deskjet is listed, please right click on it and select 'Remvoe Device' or 'Delete' 7. Next, under the Printers section in the Devices and Printers window, click on any printer that shows once just to highlight it. Click on Print Server Properties at the top of the window. 8. Under Print Server Properties, click on the Drivers tab. 9. If you see your HP Deskjet listed under Drivers, click on it and choose Remove at the bottom. 10. Click Remove Driver Only 11. Select OK 12. Select Apply and OK under the Print Server Properties window 13. Close Devices and Printers. Please proceed to the next step. Step 2: Clear Temp Files: 1. Click on your Start button 2. Type Run. Click Run to launch the Run dialogue box. 3. In the Run box type %temp% and click OK 4. When the Temp folder opens, select Ctrl + A at the same time on your keyboard. Everything in this folder will now highlight. 5. Select the 'delete' button on your keyboard. The Temp folder contains temporary internet files. No actual files or folders on your computer will be affected by deleting the Temp files. Should a Temp file still be used than you will automatically get the pop up to 'skip' that item. 6. Close the Temp folder once it is emptied 7. Right click the Recycling Bin on your desktop and select Empty Recycling Bin. Please proceed to the last step. Step 3: Install Device: Please click here to download and run the HP Printer Install WizardOnce the download has completed please follow the steps under the PIW to install your devicePlug in the USB Cable only when prompted by the installerOnce the installation has completed successfully please test printing and scanning to confirm that your product is functioning as per normal. Please respond to this post with the result of your troubleshooting. Good luck!

When I go to create a new project in imovie using the iPhone 5, I am not able to see any of my video clips or photos that are saved on the device.

When I go to create a new project in imovie using the iPhone 5, I am not able to see any of my video clips or photos that are saved on the device.

When you move or copy the compound clips with their events into an external drive all the events should be there. Not clear on why you want to move them into a single event. You can drag and drop from one event to another.
Why are you using compound clips? You can simply copy the project from each machine with used media onto the external drive and that should do it.

About 2 weeks ago, not able to print all pages in a .pdf document using internet explorer 11?

About 2 weeks ago, not able to print all pages in a .pdf document stored in a folder (I'm using Windows 7)?
It only prints 1 page then my Brother MFC-J4510DW Printer says "Please put another piece of paper in the feed slot"....the problem is the print setting is set to "manual mode" in Windows 7 rather than "general setting". If you try to change the setting to "general", it will not accept the change.

Hi.
I did try using the printParams feature and it worked, but since I need to be able to print sets of non-consecutive pages, I end up having to bring up the print dialogue multiple times and have the user set watermarks each time.
I decided to just create a new pdf in a temp directory containing the selected pages and open this document in a new window. This works well and allows them to use the print button on the window to print, bringing up the print dialogue just once. However, since I need to open the document in a way that shows the print button, I am using OpenInWindowEx, with AV_DOC_VIEW, and the option PDUseBookmarks or PDUseThumbs, rather than PDUseNone. This displays a toolbar which also includes icons for creating a new pdf, deleting pages, etc. I do not really want to include these icons on the toolbar. Is there a way to remove unwanted icons from the toolbar, or make them invisible?
Hope this makes sense. Thanks for your help.
Mary

I can only print the current page of downloaded pdf's. Not able to print "all". I'm using a Macbook air.

I can only print the current page of downloaded pdf's. Not able to print "all". I'm using a Macbook air.

it says "the document could not be printed". "There were no ages selected to print".
I selected "all". I always tried selecting pages "1-3".
The only choice that works is current page. Very strange.

I am not able to print in cannon ir series 2520 after Maverick update

I am not able to print in cannon ir series 2520 after Maverick update, printer is in pause and even after resuming it it dosent work. Pl help
Same case with the projector not able to connect it.

The driver link you have provided will work. But we have found that if the previous driver is installed on the Mac, the user selects this older driver PPD when adding the printer instead of the new driver PPD because it has UFR in the name, which the new v10.2 driver does not.
So as mentioned this new version UFR2 v10.2.1 includes an uninstaller to remove the old driver and PPDs, thus reducing the chance of the user making a mistake when adding the printer. The next issue is then getting them to select the correct protocol.
I expect that Canon USA will update their site over the weekend to provide this latest version of the driver. Canon Oz gets its drivers direct from Canon INC so that's why we are a little bit earlier with some updates.

I am not able to print double side using HP 2015dn printer using imac

I am not able to print double side using HP 2015dn printer using imac.

I found this information on HP site, but the article was quite old. May still be relevant:
1. Create a multi page document, or something that is more than one page.
2. Go to File/Page Setup.
3. Ensure the printer is listed in the Format for menu.
4. Click OK.
5. Go to File/Print but do not print yet.
6. Change the Copies and Pages menu to 'Layout'.
7. The Two-Sided option will be selectable only if the P2015 is listed in the Printer menu at the top of the print dialogue box.
8. Once you have chosen Long-edged binding, for example, click Print.

Not able to print in duplex

On this windows 7 PC, Since I upgraded from Acrobate Reader 8 to Adober 9 and reader10, I am not able to print in duplex mode. I works fine from another computer Windows XP using Adobe Reader 6.0 using the same shared and WiFi printers.
Looking at the document file property in the advance tab, in the print dialog preset window, I am not able to change the duplex mode from grayed "Simplex" to Duplex.
How do I fix this problem?
See screen print picture

Hi,
The HP Deskjet 2520 does not support automatic print duplexing and therefore any checkbox will not apply for such.
You may perform manual duplexng on Mac OS using the Pages to Print option as following:
From the file used to print click the File menu and select Print.
NOTE: The Print window might be minimized. Press on Show Details to show any available print option.
From the main drop does menu select Paper Handaling.
The main menu will usually list the program name (e.g. TextEdit).
Will appear as Copies & Pages within Microsoft Office applications.
Set the Pages to Print option as Odd Only, as well set the Page Order as Automatic and click on Print.
After the odd-numbered pages have printed, reload the paper with the printed side facing up and repeat the process above by setting the Pages to Print as Even Only this time.
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Not able to print PDF report from Oracle APPS

adcmctl.sh version 115.17.
We have a network printer HP Laserjet 4250 which is configured on our concurrent manager server of RH Linux OS. We are using HP LASERJET 4250 Postscript driver. We are able to print PDF's directly however through CC manager we are not able to print reports in Proper PDF format. Has anyone faced such an issue with Oracle Apps?

user11996936 wrote:
Has anyone faced such an issue with Oracle Apps?Maybe. Maybe not. Ask to the proper forum. Here you are in Peoplesoft forum.
Nicolas.

Not able to Print the report

Hello All,I am not able to print the report. When i click on the icon a blank form opens up. Is there something i need to do to see the form with some details.Thanksram 

Hi Ram, Can you give me some more details around your issue? How exactly are you building the viewer? Are you using the JSP Page Wizard that comes with Crystal Reports for Eclipse? If so, then can you tell me what application server you are deploying to? All of these pieces may help narrow down the issue. Regards, Sean Johnson (CR4E Product Manager) <a href="http://www.eclipseplugincentral.com/Web_Links-index-req-ratelink-lid-639.html">Rate this plugin @ Eclipse Plugin Central</a>

Not able to view text while typing beyond the top edge of the keyboard

I have an iPad mini with updated iOS 8.1.3 ......
Honestly I was very happy with iOS 7 it was perfect. The iPad was working fast and effortlessly. Just like how any apple product should be.
Until iOS 8 spoiled the show. There are many problems I'm facing after the update, but I want a solution for my major problem.
Problem 1: (Major –Blinded by the Keyboard)
I'm not able to view the body text beyond the edges of the keyboard while I’m typing; may it be in Notes, Pages, Numbers, Keynotes, calendar or any other app, which requires typing. Earlier I could just swipe it up and so it got scrolled to the end of the document. I extensively use notes, Calendar, pages, numbers, and keynote on iPad but sad that I can't see anything, though it is typing beyond the edge of the new keyboard. It's just stuck. Presently I'm copy-pasting, by typing at the beginning of the document cause after it reaches the edge of the keyboard I'm blind can't see. Please fix it soon before people realise this.
Problem 2: (updating)
iOS 8.1.2 is slow for iPad mini 1. When the processor is not able to manage this update then why does Apple give the option of updating. iOS 7 was just perfect. I was forced to update it because my app updates wouldn't update. Soon as I click update it opens the app and there you have it 'nothing'.
Problem 3: (Siri)
what is the use of Siri when it is slow to react, (in 3G). It just opens up slow.
Problem 4: (Photos app)
Photos app response time is very slow on iPad.
Problem 5: (assertive touch)
The assertive touch button on screen just goes dud sometimes on iPad.

For your keyboard problem: Hold down the home & sleep/wake buttons simultaneously until the Apple Logo appears then let go & let the iPad boot up normally.
For your other issues, & if you do not wish to update to iOS 8.2, do a general reset:
Settings->General->Reset->Reset All Settings. You won't lose any data but will have to log back into your wifi networks.

Not able to print reader file

When I convert MS Word files to Adobe Reader files, some people are not able to print them. Some of the content prints for instance, but some is missing. The graphics may print, but the text is missing.
Any ideas?
Thanks,
Brian

Thanks for the response Michael,
Here is a file I converted from Word to a PDF that will only print the graphics.
I am using Word 2007 and Adobe Reader 9 Pro. I have the CS4 suite. When I save, I am using the following parameters:
Convert Document Information
Enable Accessibility and Reflow with tagged Adobe PDF
Create Bookmarks
Convert Word Headings to Bookmarks
I should add that changing and eliminating these parameters make no difference.
Thanks,
Brian

Am using hp deskjet 1050 series...am not able to print text in black ,why?

Similar Messages

Maybe you are looking for