An error was encountered performing the requested operation:
I frequently get this error while I initially open a connection and click on a table:
An error was encountered performing the requested operation:
Stream has already been closed
Vendor code 17027
I cannot see the columns information and have to refresh. After this error, if I switch to Data tab from the default Columns tab, I usually get another error that says:
Connection is currently busy. Try again?
[Try Again] [Abort]
I never had these errors using Toad for Oracle tool.
My environment:
Windows 7 64-bit with 16G RAM
Oracle Database 11g R2
Edited by: 恩承四季 on Jan 28, 2013 1:27 AM
Edited by: 恩承四季 on Jan 28, 2013 1:27 AM
Hi,
Vendor code 17027Searching the forum for that issue only yields hits for prior SQL Developer releases. Be aware that the release shipped with DB 11g is rather out-of-date so, if you haven't already downloaded and installed the latest release (3.2.20.09.87), I would recommend upgrading. Easiest is to select the 32-bit version with JDK included.
Regards,
Gary
Similar Messages
-
From sql developer I am trying to connect to database in my local machine. It shows the following below error. Any suggestions?
An error was encountered performing the requested operation:
Listener refused the connection with the following error:
ORA-12505, TNS:listener does not currently know of SID given in connect descriptor
Vendor code 12505lsnrctl results are as shown below
C:\Users\ndodd_000>lsnrctl status
LSNRCTL for 64-bit Windows: Version 11.2.0.1.0 - Production on 18-AUG-2013 17:40
:25
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1521)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 64-bit Windows: Version 11.2.0.1.0 - Produ
ction
Start Date 18-AUG-2013 15:29:41
Uptime 0 days 2 hr. 10 min. 50 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File C:\app\ndodd_000\product\11.2.0\dbhome_1\network\admin
\listener.ora
Listener Log File c:\app\ndodd_000\diag\tnslsnr\Vamsi\listener\alert\log
.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1521ipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1521)))
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "sysdba" has 1 instance(s).
Instance "sysdba", status READY, has 1 handler(s) for this service...
Service "sysdbaXDB" has 1 instance(s).
Instance "sysdba", status READY, has 1 handler(s) for this service...
The command completed successfully
lsnrctl service results
LSNRCTL for 64-bit Windows: Version 11.2.0.1.0 - Production on 18-AUG-2013 17:
:20
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1521)))
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0
LOCAL SERVER
Service "sysdba" has 1 instance(s).
Instance "sysdba", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:186 refused:0 state:ready
LOCAL SERVER
Service "sysdbaXDB" has 1 instance(s).
Instance "sysdba", status READY, has 1 handler(s) for this service...
Handler(s):
"D000" established:0 refused:0 current:0 max:1022 state:ready
DISPATCHER <machine: VAMSI, pid: 904>
(ADDRESS=(PROTOCOL=tcp)(HOST=Vamsi)(PORT=49237))
The command completed successfully -
Error 58 The specified server cannot perform the requested operation
Hello,
I will try to explain the situation as brief as possible. Next to our current existing MDT environment (MDT2010 on Windows 2008 R2) we are no building a new system (MDT2013 on WIndows 2012 R2). We have multiple sites and the MDT deployment share is setup
in DFRS share so every site is getting the same deployment information and replication is done automatically. This has been working firn for 3 years with the old system and also with the new environment it was working fine in our own subnet. But when after
i have setup the remote MDT and WDS servers it is not working in these remote sites. The images are loading fine but for some reason the win PE is not connecting to the shares on the windows 2012 server in our site. When i manuualy connect from a remote win
PE to our server i always get the error: system error 58 has occured. The specified server cannot perform the requested operation.
I have been doing some troubleshooting and it seems i only got this issue when i connect from win PE 5.0 to a windows 2012 R2 server in a remote subnet.
When i use win PE 5.0 and connect to a windows 2012 R2 share in the same subnet it connects fine.
When i use win PE 5.0 and connect to a windows 2008 R2 share in a remote subnet it connects fine
When i use an older win PE and i connect to a windows 2012 R2 share in a remote subnet it connects fine
When i use win PE 5.0 and connect to a windows 2012 R2 share in a remote subnet it does NOT connect and gives the above error
The problem is that this problem also does not occure in Windows 7, after the machine was build by MDT and get into the OS i can connect without a problem to the windows 2012 R2 shares.
Checking the event viewer on the 2012 R2 server that is hosting the shares i see that the following events are created:
4624: An account was successfully logged on.
Subject:
Security ID:
NULL SID
Account Name:
Account Domain:
Logon ID:
0x0
Logon Type: 3
Impersonation Level: Impersonation
New Logon:
Security ID:
domain\username
Account Name:
username
Account Domain: domain
Logon ID:
0x1F1FC0
Logon GUID:
{8e360e91-001b-c726-84a6-e7281a4bcac8}
Process Information:
Process ID:
0x0
Process Name:
Network Information:
Workstation Name:
Source Network Address:
x.x.x.x
Source Port:
60077
Detailed Authentication Information:
Logon Process:
Kerberos
Authentication Package:
Kerberos
Transited Services:
Package Name (NTLM only):
Key Length:
0
This event is generated when a logon session is created. It is generated on the computer that was accessed.
The subject fields indicate the account on the local system which requested the logon. This is most commonly a service such as the Server service, or a local process such as Winlogon.exe or Services.exe.
The logon type field indicates the kind of logon that occurred. The most common types are 2 (interactive) and 3 (network).
The New Logon fields indicate the account for whom the new logon was created, i.e. the account that was logged on.
The network fields indicate where a remote logon request originated. Workstation name is not always available and may be left blank in some cases.
The impersonation level field indicates the extent to which a process in the logon session can impersonate.
The authentication information fields provide detailed information about this specific logon request.
- Logon GUID is a unique identifier that can be used to correlate this event with a KDC event.
- Transited services indicate which intermediate services have participated in this logon request.
- Package name indicates which sub-protocol was used among the NTLM protocols.
- Key length indicates the length of the generated session key. This will be 0 if no session key was requested.
5140:
A network share object was accessed.
Subject:
Security ID:
domain\username
Account Name:
username
Account Domain: domain
Logon ID:
0x1F1FC0
Network Information:
Object Type:
File
Source Address:
x.x.x.x
Source Port:
60077
Share Information:
Share Name:
\\*\Captures
Share Path:
\??\D:\Captures
Access Request Information:
Access Mask:
0x1
Accesses:
ReadData (or ListDirectory)
4634:
An account was logged off.
Subject:
Security ID:
domain\username
Account Name:
username
Account Domain: domain
Logon ID:
0x1F1FC0
Logon Type: 3
This event is generated when a logon session is destroyed. It may be positively correlated with a logon event using the Logon ID value. Logon IDs are only unique between reboots on the same computer.
Anyone an idea why this is happening?Hi,
We can refer to the following blog for MDT troubleshooting:
http://blogs.technet.com/b/askcore/archive/2012/05/08/mdt-2010-amp-2012-my-deployment-failed-what-and-where-are-logs-i-should-review.aspx
Best Regards,
Vincent Wu
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. -
Windows Resource Protection could not perform the requested operation.
A close friend's machine was blue screening on boot so he had me take a look at it. The error in the BSOD indicated Windows was having trouble reading from the drive. Although the drive wasn't clicking, based on what I was seeing, it seemed pretty
clear the drive was on its way out. I ran chkdsk, several times, and it found plenty of bad sectors but wasn't able to really fix anything. Fortunately I was able to
clone the drive using gparted
run chkdsk
fix the master boot record, boot sector and boot configuration data store
run chkdsk again
Now all is well
Upon booting I noticed the system was dreadfully out of date: Firefox, Java, Reader, Flash - the works - so I updated all that. I also noticed it was missing something like 50-70 Windows updates so I had to straight that right away. It
managed to install 15-20 before failing with 80070057. This to me isn't too uncommon so I rebooted thinking it wouldn't choke next time. Much to my chagrin, any subsequent attempts fail with error 80070057. I even tried installing just a few updates
at a time, even just 1, and the error persists. My assumption is that one or more files are maybe damaged and need to be fixed.
I ran sfc /scannow and it gets to about 27%, then fails with "Windows Resource Protection could not perform the requested operation." I did the following:
backed up the existing CBS log
ran sfc /scannow again
watched the log in powershell via Get-Content C:\Windows\Logs\CBS\CBS.log -Wait
It started out strong
PS C:\Windows\Logs\CBS> Get-Content C:\Windows\Logs\CBS\CBS.log -Wait
2014-03-06 18:48:33, Info CBS Loaded Servicing Stack v6.0.6002.18005 with Core: C:\Windows\winsxs\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.0.6
002.18005_none_676975d87cc9b6e6\cbscore.dll
2014-03-06 18:48:33, Info CSI 00000001@2014/3/6:23:48:33.027 WcpInitialize (wcp.dll version 0.0.0.5) called (stack @0x7fef0cf8c85 @0x7feff3f53ae @0x7feff3c3ed1
@0xffa949a8 @0xffa930c9 @0xffa93578)
2014-03-06 18:48:33, Info CSI 00000002@2014/3/6:23:48:33.045 WcpInitialize (wcp.dll version 0.0.0.5) called (stack @0x7fef0cf8c85 @0x7feff4386cf @0x7feff4125d9
@0x7feff3c3feb @0xffa949a8 @0xffa930c9)
2014-03-06 18:48:33, Info CSI 00000003@2014/3/6:23:48:33.048 WcpInitialize (wcp.dll version 0.0.0.5) called (stack @0x7fef0cf8c85 @0x7feff21838d @0x7feff2184ba
@0xffa94207 @0xffa93125 @0xffa93578)
2014-03-06 18:48:33, Info CBS NonStart: Checking to ensure startup processing was not required.
2014-03-06 18:48:33, Info CSI 00000004 IAdvancedInstallerAwareStore_ResolvePendingTransactions (call 1) (flags = 00000004, progress = NULL, phase = 0, pdwDispo
sition = @0xb8fad0
2014-03-06 18:48:33, Info CBS NonStart: Success, startup processing not required as expected.
2014-03-06 18:48:33, Info CSI 00000005 CSI Store 4751600 (0x00000000004880f0) initialized
2014-03-06 18:48:38, Info CSI 00000006 [SR] Verifying 100 (0x0000000000000064) components
2014-03-06 18:48:38, Info CSI 00000007 [SR] Beginning Verify and Repair transaction
2014-03-06 18:48:39, Info CSI 00000008 Repair results created:
POQ 0 starts:
POQ 0 ends.
2014-03-06 18:48:39, Info CSI 00000009 [SR] Verify complete
2014-03-06 18:48:39, Info CSI 0000000a [SR] Verifying 100 (0x0000000000000064) components
2014-03-06 18:48:39, Info CSI 0000000b [SR] Beginning Verify and Repair transaction
2014-03-06 18:48:40, Info CSI 0000000c Repair results created:
POQ 1 starts:
POQ 1 ends.
2014-03-06 18:48:40, Info CSI 0000000d [SR] Verify complete
2014-03-06 18:48:40, Info CSI 0000000e [SR] Verifying 100 (0x0000000000000064) components
2014-03-06 18:48:40, Info CSI 0000000f [SR] Beginning Verify and Repair transaction
2014-03-06 18:48:41, Info CSI 00000010 Repair results created:
POQ 2 starts:
POQ 2 ends.
2014-03-06 18:48:41, Info CSI 00000011 [SR] Verify complete
2014-03-06 18:48:41, Info CSI 00000012 [SR] Verifying 100 (0x0000000000000064) components
2014-03-06 18:48:41, Info CSI 00000013 [SR] Beginning Verify and Repair transaction
2014-03-06 18:48:41, Info CSI 00000014 Repair results created:
POQ 3 starts:..... and so on
Until it hit a problem
POQ 34 ends.
2014-03-06 18:49:08, Info CSI 00000091 [SR] Verify complete
2014-03-06 18:49:08, Info CSI 00000092 [SR] Verifying 100 (0x0000000000000064) components
2014-03-06 18:49:08, Info CSI 00000093 [SR] Beginning Verify and Repair transaction
2014-03-06 18:49:09, Info CSI 00000094 Repair results created:
POQ 35 starts:
POQ 35 ends.
2014-03-06 18:49:09, Info CSI 00000095 [SR] Verify complete
2014-03-06 18:49:09, Info CSI 00000096 [SR] Verifying 100 (0x0000000000000064) components
2014-03-06 18:49:09, Info CSI 00000097 [SR] Beginning Verify and Repair transaction
2014-03-06 18:49:10, Info CSI 00000098 Repair results created:
POQ 36 starts:
POQ 36 ends.
2014-03-06 18:49:10, Info CSI 00000099 [SR] Verify complete
2014-03-06 18:49:11, Info CSI 0000009a [SR] Verifying 100 (0x0000000000000064) components
2014-03-06 18:49:11, Info CSI 0000009b [SR] Beginning Verify and Repair transaction
2014-03-06 18:49:12, Error CSI 0000009c@2014/3/6:23:49:12.802 (F) d:\longhorn\base\wcp\primitiveinstallers\filehierarchy.cpp(1939): Error STATUS_INVALID_PARAMETER originated in fun
ction FileInstaller::CFileInstallerHierarchy::PortFileInformationBetweenCdfs expression: TmpBlob.Length == sizeof(LUACDF_FILE_ENTRY)
[gle=0x80004005]
2014-03-06 18:49:16, Error CSI 0000009d (F) STATUS_INVALID_PARAMETER #2119209# from CFileInstaller::CommitChanges(...)[gle=0xd000000d]
2014-03-06 18:49:16, Error CSI 0000009e (F) STATUS_INVALID_PARAMETER #2119208# from PrimitiveInstaller::CCoordinator::FinalizeChanges(...)[gle=0xd000000d]
2014-03-06 18:58:33, Info CBS Scavenge: Package store indicates there is no component to scavenge, skipping.
I searched for "[SR]" but I didn't see anything of great interest
C:\Windows\system32>findstr /c:"[SR]" %windir%\logs\cbs\cbs.log
2014-03-06 18:48:38, Info CSI 00000006 [SR] Verifying 100 (0x0000000000000064) components
2014-03-06 18:48:38, Info CSI 00000007 [SR] Beginning Verify and Repair transaction
2014-03-06 18:48:39, Info CSI 00000009 [SR] Verify complete
2014-03-06 18:48:39, Info CSI 0000000a [SR] Verifying 100 (0x0000000000000064) components
2014-03-06 18:48:39, Info CSI 0000000b [SR] Beginning Verify and Repair transaction
2014-03-06 18:48:40, Info CSI 0000000d [SR] Verify complete
2014-03-06 18:48:40, Info CSI 0000000e [SR] Verifying 100 (0x0000000000000064) components
2014-03-06 18:48:40, Info CSI 0000000f [SR] Beginning Verify and Repair transaction
2014-03-06 18:48:41, Info CSI 00000011 [SR] Verify complete
2014-03-06 18:48:41, Info CSI 00000012 [SR] Verifying 100 (0x0000000000000064) components
2014-03-06 18:48:41, Info CSI 00000013 [SR] Beginning Verify and Repair transaction
2014-03-06 18:48:41, Info CSI 00000015 [SR] Verify complete
2014-03-06 18:48:42, Info CSI 00000016 [SR] Verifying 100 (0x0000000000000064) components
2014-03-06 18:48:42, Info CSI 00000017 [SR] Beginning Verify and Repair transaction
2014-03-06 18:48:42, Info CSI 00000019 [SR] Verify complete
2014-03-06 18:48:42, Info CSI 0000001a [SR] Verifying 100 (0x0000000000000064) components
2014-03-06 18:48:42, Info CSI 0000001b [SR] Beginning Verify and Repair transaction
2014-03-06 18:48:44, Info CSI 0000001d [SR] Verify complete
2014-03-06 18:48:44, Info CSI 0000001e [SR] Verifying 100 (0x0000000000000064) components
2014-03-06 18:48:44, Info CSI 0000001f [SR] Beginning Verify and Repair transaction
2014-03-06 18:48:45, Info CSI 00000021 [SR] Verify complete
2014-03-06 18:48:45, Info CSI 00000022 [SR] Verifying 100 (0x0000000000000064) components
2014-03-06 18:48:45, Info CSI 00000023 [SR] Beginning Verify and Repair transaction
2014-03-06 18:48:45, Info CSI 00000025 [SR] Verify complete
2014-03-06 18:48:46, Info CSI 00000026 [SR] Verifying 100 (0x0000000000000064) components
2014-03-06 18:48:46, Info CSI 00000027 [SR] Beginning Verify and Repair transaction
2014-03-06 18:48:46, Info CSI 00000029 [SR] Verify complete
2014-03-06 18:48:47, Info CSI 0000002a [SR] Verifying 100 (0x0000000000000064) components
2014-03-06 18:48:47, Info CSI 0000002b [SR] Beginning Verify and Repair transaction
2014-03-06 18:48:47, Info CSI 0000002d [SR] Verify complete
2014-03-06 18:48:48, Info CSI 0000002e [SR] Verifying 100 (0x0000000000000064) components
2014-03-06 18:48:48, Info CSI 0000002f [SR] Beginning Verify and Repair transaction
2014-03-06 18:48:48, Info CSI 00000031 [SR] Verify complete
2014-03-06 18:48:48, Info CSI 00000032 [SR] Verifying 100 (0x0000000000000064) components
2014-03-06 18:48:48, Info CSI 00000033 [SR] Beginning Verify and Repair transaction
2014-03-06 18:48:49, Info CSI 00000035 [SR] Verify complete
2014-03-06 18:48:49, Info CSI 00000036 [SR] Verifying 100 (0x0000000000000064) components
2014-03-06 18:48:49, Info CSI 00000037 [SR] Beginning Verify and Repair transaction
2014-03-06 18:48:50, Info CSI 00000039 [SR] Verify complete
2014-03-06 18:48:50, Info CSI 0000003a [SR] Verifying 100 (0x0000000000000064) components
2014-03-06 18:48:50, Info CSI 0000003b [SR] Beginning Verify and Repair transaction
2014-03-06 18:48:50, Info CSI 0000003d [SR] Verify complete
2014-03-06 18:48:51, Info CSI 0000003e [SR] Verifying 100 (0x0000000000000064) components
2014-03-06 18:48:51, Info CSI 0000003f [SR] Beginning Verify and Repair transaction
2014-03-06 18:48:51, Info CSI 00000041 [SR] Verify complete
2014-03-06 18:48:51, Info CSI 00000042 [SR] Verifying 100 (0x0000000000000064) components
2014-03-06 18:48:51, Info CSI 00000043 [SR] Beginning Verify and Repair transaction
2014-03-06 18:48:52, Info CSI 00000045 [SR] Verify complete
2014-03-06 18:48:52, Info CSI 00000046 [SR] Verifying 100 (0x0000000000000064) components
2014-03-06 18:48:52, Info CSI 00000047 [SR] Beginning Verify and Repair transaction
2014-03-06 18:48:52, Info CSI 00000049 [SR] Verify complete
2014-03-06 18:48:53, Info CSI 0000004a [SR] Verifying 100 (0x0000000000000064) components
2014-03-06 18:48:53, Info CSI 0000004b [SR] Beginning Verify and Repair transaction
2014-03-06 18:48:53, Info CSI 0000004d [SR] Verify complete
2014-03-06 18:48:54, Info CSI 0000004e [SR] Verifying 100 (0x0000000000000064) components
2014-03-06 18:48:54, Info CSI 0000004f [SR] Beginning Verify and Repair transaction
2014-03-06 18:48:54, Info CSI 00000051 [SR] Verify complete
2014-03-06 18:48:54, Info CSI 00000052 [SR] Verifying 100 (0x0000000000000064) components
2014-03-06 18:48:54, Info CSI 00000053 [SR] Beginning Verify and Repair transaction
2014-03-06 18:48:55, Info CSI 00000055 [SR] Verify complete
2014-03-06 18:48:55, Info CSI 00000056 [SR] Verifying 100 (0x0000000000000064) components
2014-03-06 18:48:55, Info CSI 00000057 [SR] Beginning Verify and Repair transaction
2014-03-06 18:48:55, Info CSI 00000059 [SR] Verify complete
2014-03-06 18:48:56, Info CSI 0000005a [SR] Verifying 100 (0x0000000000000064) components
2014-03-06 18:48:56, Info CSI 0000005b [SR] Beginning Verify and Repair transaction
2014-03-06 18:48:56, Info CSI 0000005d [SR] Verify complete
2014-03-06 18:48:56, Info CSI 0000005e [SR] Verifying 100 (0x0000000000000064) components
2014-03-06 18:48:56, Info CSI 0000005f [SR] Beginning Verify and Repair transaction
2014-03-06 18:48:57, Info CSI 00000061 [SR] Verify complete
2014-03-06 18:48:57, Info CSI 00000062 [SR] Verifying 100 (0x0000000000000064) components
2014-03-06 18:48:57, Info CSI 00000063 [SR] Beginning Verify and Repair transaction
2014-03-06 18:48:58, Info CSI 00000065 [SR] Verify complete
2014-03-06 18:48:58, Info CSI 00000066 [SR] Verifying 100 (0x0000000000000064) components
2014-03-06 18:48:58, Info CSI 00000067 [SR] Beginning Verify and Repair transaction
2014-03-06 18:49:00, Info CSI 00000069 [SR] Verify complete
2014-03-06 18:49:00, Info CSI 0000006a [SR] Verifying 100 (0x0000000000000064) components
2014-03-06 18:49:00, Info CSI 0000006b [SR] Beginning Verify and Repair transaction
2014-03-06 18:49:00, Info CSI 0000006d [SR] Verify complete
2014-03-06 18:49:01, Info CSI 0000006e [SR] Verifying 100 (0x0000000000000064) components
2014-03-06 18:49:01, Info CSI 0000006f [SR] Beginning Verify and Repair transaction
2014-03-06 18:49:01, Info CSI 00000071 [SR] Verify complete
2014-03-06 18:49:02, Info CSI 00000072 [SR] Verifying 100 (0x0000000000000064) components
2014-03-06 18:49:02, Info CSI 00000073 [SR] Beginning Verify and Repair transaction
2014-03-06 18:49:02, Info CSI 00000075 [SR] Verify complete
2014-03-06 18:49:02, Info CSI 00000076 [SR] Verifying 100 (0x0000000000000064) components
2014-03-06 18:49:02, Info CSI 00000077 [SR] Beginning Verify and Repair transaction
2014-03-06 18:49:03, Info CSI 00000079 [SR] Verify complete
2014-03-06 18:49:03, Info CSI 0000007a [SR] Verifying 100 (0x0000000000000064) components
2014-03-06 18:49:03, Info CSI 0000007b [SR] Beginning Verify and Repair transaction
2014-03-06 18:49:04, Info CSI 0000007d [SR] Verify complete
2014-03-06 18:49:04, Info CSI 0000007e [SR] Verifying 100 (0x0000000000000064) components
2014-03-06 18:49:04, Info CSI 0000007f [SR] Beginning Verify and Repair transaction
2014-03-06 18:49:05, Info CSI 00000081 [SR] Verify complete
2014-03-06 18:49:05, Info CSI 00000082 [SR] Verifying 100 (0x0000000000000064) components
2014-03-06 18:49:05, Info CSI 00000083 [SR] Beginning Verify and Repair transaction
2014-03-06 18:49:06, Info CSI 00000085 [SR] Verify complete
2014-03-06 18:49:06, Info CSI 00000086 [SR] Verifying 100 (0x0000000000000064) components
2014-03-06 18:49:06, Info CSI 00000087 [SR] Beginning Verify and Repair transaction
2014-03-06 18:49:06, Info CSI 00000089 [SR] Verify complete
2014-03-06 18:49:07, Info CSI 0000008a [SR] Verifying 100 (0x0000000000000064) components
2014-03-06 18:49:07, Info CSI 0000008b [SR] Beginning Verify and Repair transaction
2014-03-06 18:49:07, Info CSI 0000008d [SR] Verify complete
2014-03-06 18:49:08, Info CSI 0000008e [SR] Verifying 100 (0x0000000000000064) components
2014-03-06 18:49:08, Info CSI 0000008f [SR] Beginning Verify and Repair transaction
2014-03-06 18:49:08, Info CSI 00000091 [SR] Verify complete
2014-03-06 18:49:08, Info CSI 00000092 [SR] Verifying 100 (0x0000000000000064) components
2014-03-06 18:49:08, Info CSI 00000093 [SR] Beginning Verify and Repair transaction
2014-03-06 18:49:09, Info CSI 00000095 [SR] Verify complete
2014-03-06 18:49:09, Info CSI 00000096 [SR] Verifying 100 (0x0000000000000064) components
2014-03-06 18:49:09, Info CSI 00000097 [SR] Beginning Verify and Repair transaction
2014-03-06 18:49:10, Info CSI 00000099 [SR] Verify complete
2014-03-06 18:49:11, Info CSI 0000009a [SR] Verifying 100 (0x0000000000000064) components
2014-03-06 18:49:11, Info CSI 0000009b [SR] Beginning Verify and Repair transaction
C:\Windows\system32>
I've run into sfc issues in the past, and in one instance, booting the OS install DVD, and running sfc /scannow /offbootdir=c:\ /offwindir=c:\windows did fix the issue. But I have to ask
Is there no way to do that while in Windows? Can't I mount some WIM and do it that way instead of booting the DVD?
Is that the right course of action, or is/are there some other options I should explore?
Thanks for your time & guidance.Hi,
In my opinion, if you want SFC to use a sourcepath to repair your system, you can just use in-place upgrade to do this:
How to Perform an In-Place Upgrade on Windows Vista, Windows 7, Windows Server 2008 & Windows Server 2008 R2
http://support.microsoft.com/kb/2255099
If you have any feedback on our support, please click
here
Alex Zhao
TechNet Community Support
Thanks for taking the time to reply and for this suggestion.
The in-place upgrade is a wonderful potential solution, but the process requires the source media. Most systems these days don't include the OS or recovery CD's because the manufacturers want you to pay for them. And most consumers aren't spending
the $50-$70 dollars to get the media, which complicates things in situations like this. So while they've purchased a machine and have a valid Microsoft COA sticker on the box, they can't do anything.
Also, to make matters worse, I posted this in the wrong forum as this is a Vista Home Premium PC. [My sincere apologies for that. Mods please feel free to move/reclassify] I do have a Vista Home Premium DVD, but its the 32-bit version, not 64-bit,
which is what this system is. So unless I can locate a Visa Home Premium 64-bit DVD, or they upgrade to Windows 7 or 8 (which they probably should do anyway), we're sunk. -
Deduplication: There is insufficient disk space to perform the requested operation
Hello,
on my Win2012R2 Fileserver is a 550GB disk with userdrives.
I startet Data Deplication but after 100 Optimized Files the job stopped and I cannot start it again.
If I check the Event Log I find:
Data Deplication could not initialize change log under \\?\Volume{ID}}.... The error code was 0x8056530a, There is unsufficient disk space to perform the requested operation. (Event ID 4119)
Then I tried to unoptimize the files with Start-DedupJob -type Unoptimization -volume "E:" but I got another error:
HRESULT 0x8056533a, This kon will not run at the scheduled time because it requires more memory than is currently available.
On the 550GB disk I have about 140GB free diskspace.
The server have 8GB RAM and use 2,3GB at the moment.
CPU is at 0-2%
SYSTEM have full access on the drive, there is no SWAP or boot file on it.
Any more ideas?
I already tried a reboot... ;)
Thanks.
bye ManuelHi Sophia,
KB3000850 is installed, the server restarted. But I'm sorry to say, same situation:
PS C:\Windows\system32> Enable-DedupVolume "E:"
Enabled UsageType SavedSpace SavingsRate
Volume
True Default 26.95 MB 0 %
E:
PS C:\Windows\system32> Start-DedupJob -type Optimization -volume "E:" -wait
Type ScheduleType StartTime Progress State
Volume
Optimization Manual
0 % Failed E:
Eventlog:
ID 4119
Data Deduplication could not initialize change log under \\?\Volume{7a4277ad-72ee-11e4-80bf-0050569d1d6b}\System Volume Information\Dedup\Logs. The error code was 0x8056530a, There is insufficient disk space to perform the requested operation.
ID 4106
Data Deduplication warning: Available memory (4095 MB) is less than minimum required (4392 MB)
Error: 0x00000000, The operation completed successfully.
Volume E: is 549 GB and have 186 GB free
Memory is 2,6/8,0 GB at the moment
Best regards,
Manuel -
"The specified server cannot perform the requested operation" when rpc from server 2003 to Windows 7
I am having problems where all my Windows 2003 servers cannot rpc to 2 of my Windows 7 workstations, error message is "The specified server cannot perform the requested operation".
All the machines are in workgroup environment.
Windows 7 workstations: desk1, desk2, desk3, desk4, desk5, desk6
Windows 2003 servers: server1, server2, server3, server4, server5
Windows 2008 server: server6
From any Windows 7 workstation I can rpc to any other machines,
\\desk1\d$, no problem
From any Windows 2003 server I can rpc to all the machines exception desk4 and desk5, they give the "The specified server cannot perform the requested operation". However, desk4 and desk5 can rpc to any other machines (including the Windows 2003
servers), no problem
From Windows 2008 rpc to desk4 and desk5 also no problem.
I also have no problem rpc between any of the Windows 2003 servers,
\\server2\d$ from server3, no problem.
I turned off the firewall at desk5 and desk4, just to try, but didn't help, same problem. This show firewall is not the cause of the problem.
Desk4 and Desk5 used to run Windows 2012 for 1 year and recently I downgraded them Windows 7 Professional x64. When they were running as Windows 2012, those Windows 2003 servers have no problem rpc to desk5 and desk4.
The issue is thus lying between desk4 and desk5 with Windows 2003 only\
Any suggestions?
Valuable skills are not learned, learned skills aren't valuable.Hi,
I found a related thread and a hotfix for similar issue:
Problems Accessing Administrative Shares Remotely - Windows cannot access \\Servername\ShareName
http://social.technet.microsoft.com/Forums/windowsserver/en-US/9807a799-bea3-46ad-92a5-732779135f98/problems-accessing-administrative-shares-remotely-windows-cannot-access-servernamesharename?forum=winserver8gen
You cannot access an administrative share on a computer after you set the SrvsvcDefaultShareInfo registry entry to configure the default share permissions for a network share
https://support.microsoft.com/kb/971277/en-us
Also please check if it is caused by security program such as antivirus program.
If you have any feedback on our support, please send to [email protected] -
An error was encountered by the CAS Security Provider: Error Code: SVR_ER
Hi Everybody,
when i open dimension library that time i get a error
An error was encountered by the CAS Security Provider:
Error Code: SVR_ERR_SESSION_MGR_CAS_SECURITY_ERROR
How i can resolve i donot know ,pleas any body know help me.
Regards,
AshisI ran into the same problem. It appears to be an "undocumented feature"; however, there is a patch that is supposed to resolve the issue. The link to the patch is here:
https://updates.oracle.com/ARULink/PatchDetails/process_form?patch_num=9921096
See the following for more details:
Workspace: An error was encountered by the CAS Security Provider: Not SpecifiedError Code: SVR_ERR_SESSION_MGR_CAS_SECURITY_ERROR [ID 1265746.1]
Modified 22-NOV-2010 Type PROBLEM Status PUBLISHED
In this Document
Symptoms
Cause
Solution
References
Applies to:
Hyperion Planning - Version: 11.1.2.0.00 and later [Release: 11.1 and later ]
Information in this document applies to any platform.
Symptoms
When trying to access BPMA via the Workspace, Active Directory users get the following error:An error was encountered by the CAS Security Provider: Not SpecifiedError Code: SVR_ERR_SESSION_MGR_CAS_SECURITY_ERROR.
Cause
This behaviour is described in unpublished bug 9921096
When MSAD is configured as an external directory there is an option to enable or disable support for external groups. If Support Groups is disabled this triggers a code bug which leads to the observed behaviour on navigating to the Dimension Library.
Solution
As a workaround you can enable Support Groups.
If you want to be able to disable Support Groups you must apply patch 9921096.
References
Related
Products
•Middleware > Enterprise Performance Management > Planning > Hyperion Planning
Hope this resolves your problem!
Jennifer -
I am trying like **** to download itunes 10.6.3 (64 bit - Windows 7) and I keep getting "the installer was interrupted before the requested operations for iTunes could be completed. Your systems has not been modified." I NEED HELP, PLEASE!
I got it figured out myself... yaaaaay for me!
-
Hi everybody i'm nick from KL Malaysia, i having a problem with my Illustrator CS2 problem can't solved it, someone can help me?
My problem is when i open lllustrator after load finish the file thn will come out Error: "Could not complete the requested operation", i dunno y?
Have someone same problem with me anot? got any stion to solved it?Nick,
The first thing to try is to
a) Ctrl/Cmd+Alt/Option+Shift during startup,
or (if a) does not work)
b) Move the folder
a) is easy but irreversible, b) is more thorough and reversible, so if you like your settings and do not want to destroy them in vain, use b). -
...I get the following message, "Error starting game. The requested operation could not be completed because local player has not been authenticated".
Can anyone advise me how to resolve this please?You should contact the developer of the game for assistance.
-
An internal error was encountered in the extensible spatial index
HiAll,
Ran a query on
CREATE TABLE results1 NOLOGGING AS
SELECT a.rowid1 poly_rowid, a.rowid2 point_rowid
FROM TABLE (SDO_JOIN ('PARCEL', 'GEOMETRY', 'ND_TABLE', 'GEOMETRY')) a;
Thsi query ran for 20 hours! and came up with this error An internal error was encountered in the extensible spatial index.
But when you just run teh select statement the results come in seconds...
I am running on 11GR2 and this query was ran on Sql Developer.
Any help is much appreciated.
Edited by: CrackerJack on Mar 31, 2013 2:50 AMHow fast for the following queries?
insert into results1 SELECT a.rowid1 poly_rowid, a.rowid2 point_rowid
FROM TABLE (SDO_JOIN ('PARCEL', 'GEOMETRY', 'ND_TABLE', 'GEOMETRY')) a;
insert /*+ append */ into results1 SELECT a.rowid1 poly_rowid, a.rowid2 point_rowid
FROM TABLE (SDO_JOIN ('PARCEL', 'GEOMETRY', 'ND_TABLE', 'GEOMETRY')) a; -
I am running Windows 8.1 Pro.
I have been experiencing problems that lead me to believe the my component store is corrupted.
When I run sfc /scannow sfc immediately comes back with "Windows Resource Protection could not perform the required operation.
Here are the entries in the CBS file
TI: --- Initializing Trusted Installer ---
2014-01-21 10:45:59, Info CBS TI: Last boot time: 2014-01-21 10:28:05.492
2014-01-21 10:45:59, Info CBS Starting TrustedInstaller initialization.
2014-01-21 10:45:59, Info CBS Ending TrustedInstaller initialization.
2014-01-21 10:45:59, Info CBS Starting the TrustedInstaller main loop.
2014-01-21 10:45:59, Info CBS TrustedInstaller service starts successfully.
2014-01-21 10:45:59, Info CBS No startup processing required, TrustedInstaller service was not set as autostart
2014-01-21 10:45:59, Info CBS Startup processing thread terminated normally
2014-01-21 10:45:59, Info CBS Starting TiWorker initialization.
2014-01-21 10:45:59, Info CBS Ending TiWorker initialization.
2014-01-21 10:45:59, Info CBS Starting the TiWorker main loop.
2014-01-21 10:45:59, Info CBS TiWorker starts successfully.
2014-01-21 10:45:59, Info CBS TiWorker: Client requests SFP repair object.
2014-01-21 10:45:59, Info CBS Universal Time is: 2014-01-21 16:45:59.014
2014-01-21 10:45:59, Info CBS Open of SC_BOOT_SERVICING_DONE event failed 2
2014-01-21 10:45:59, Info CBS Loaded Servicing Stack v6.3.9600.16470 with Core: C:\WINDOWS\winsxs\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.3.9600.16470_none_fa2491fd9b3cfcb2\cbscore.dll
2014-01-21 10:45:59, Info CSI
00000001@2014/1/21:16:45:59.016 WcpInitialize (wcp.dll version 0.0.0.6) called (stack @0x7ffa54fd5929 @0x7ffa55266bda @0x7ffa55269a06 @0x7ff74300d25f @0x7ff74300dc17 @0x7ffa800d2385)
2014-01-21 10:45:59, Info CBS SQM: Initializing online with Windows opt-in: False
2014-01-21 10:45:59, Info CBS SQM: Cleaning up report files older than 10 days.
2014-01-21 10:45:59, Info CBS SQM: Requesting upload of all unsent reports.
2014-01-21 10:45:59, Info CBS SQM: Failed to start upload with file pattern: C:\WINDOWS\servicing\sqm\*_std.sqm, flags: 0x2 [HRESULT = 0x80004005
- E_FAIL]
2014-01-21 10:45:59, Info CBS SQM: Failed to start standard sample upload. [HRESULT = 0x80004005 - E_FAIL]
2014-01-21 10:45:59, Info CBS SQM: Queued 0 file(s) for upload with pattern: C:\WINDOWS\servicing\sqm\*_all.sqm, flags: 0x6
2014-01-21 10:45:59, Info CBS SQM: Warning: Failed to upload all unsent reports. [HRESULT = 0x80004005 - E_FAIL]
2014-01-21 10:45:59, Info CBS NonStart: Set pending store consistency check.
2014-01-21 10:45:59, Info CSI
00000002@2014/1/21:16:45:59.020 WcpInitialize (wcp.dll version 0.0.0.6) called (stack @0x7ffa54fd5929 @0x7ffa652e7fc0 @0x7ffa652e80f2 @0x7ff74300c9a5 @0x7ff74300dc2e @0x7ffa800d2385)
2014-01-21 10:45:59, Info CSI 00000003 No store version format found; DLL store format 0.0.0.6
2014-01-21 10:45:59, Error CSI
00000004@2014/1/21:16:45:59.027 (F) base\wcp\componentstore\storelayout.cpp(3854): Error STATUS_SXS_COMPONENT_STORE_CORRUPT originated in function ComponentStore::CRawStoreLayout::OpenCanonicalDataKey expression:
(null)
[gle=0x80004005]
2014-01-21 10:45:59, Info CBS Added C:\WINDOWS\Logs\CBS\CBS.log to WER report.
2014-01-21 10:45:59, Info CBS Added C:\WINDOWS\Logs\CBS\CbsPersist_20140121102547.cab to WER report.
2014-01-21 10:45:59, Info CBS Added C:\WINDOWS\Logs\CBS\CbsPersist_20140114224141.cab to WER report.
2014-01-21 10:45:59, Info CBS Added C:\WINDOWS\Logs\CBS\CbsPersist_20140104132548.cab to WER report.
2014-01-21 10:45:59, Info CBS Added C:\WINDOWS\Logs\CBS\CbsPersist_20131220204514.cab to WER report.
2014-01-21 10:45:59, Info CBS Added C:\WINDOWS\Logs\CBS\CbsPersist_20131215075547.cab to WER report.
2014-01-21 10:45:59, Info CBS Could not get active session for current session file logging [HRESULT = 0x80004003 - E_POINTER]
2014-01-21 10:45:59, Info CBS Not able to add pending.xml to Windows Error Report. [HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]
2014-01-21 10:45:59, Info CBS Not able to add pending.xml.bad to Windows Error Report. [HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]
2014-01-21 10:45:59, Info CBS Failed to get CSI system store [HRESULT = 0x80073712 - ERROR_SXS_COMPONENT_STORE_CORRUPT]
2014-01-21 10:45:59, Info CBS CSI store consistency check fails. [HRESULT = 0x80073712 - ERROR_SXS_COMPONENT_STORE_CORRUPT]
2014-01-21 10:45:59, Info CBS Failed to load component store [HRESULT = 0x80073712 - ERROR_SXS_COMPONENT_STORE_CORRUPT]
2014-01-21 10:45:59, Info CSI 00000005 No store version format found; DLL store format 0.0.0.6
2014-01-21 10:45:59, Error CSI
00000006@2014/1/21:16:45:59.051 (F) base\wcp\componentstore\storelayout.cpp(3854): Error STATUS_SXS_COMPONENT_STORE_CORRUPT originated in function ComponentStore::CRawStoreLayout::OpenCanonicalDataKey expression:
(null)
[gle=0x80004005]
2014-01-21 10:45:59, Info CBS Added C:\WINDOWS\Logs\CBS\CBS.log to WER report.
2014-01-21 10:45:59, Info CBS Added C:\WINDOWS\Logs\CBS\CbsPersist_20140121102547.cab to WER report.
2014-01-21 10:45:59, Info CBS Added C:\WINDOWS\Logs\CBS\CbsPersist_20140114224141.cab to WER report.
2014-01-21 10:45:59, Info CBS Added C:\WINDOWS\Logs\CBS\CbsPersist_20140104132548.cab to WER report.
2014-01-21 10:45:59, Info CBS Added C:\WINDOWS\Logs\CBS\CbsPersist_20131220204514.cab to WER report.
2014-01-21 10:45:59, Info CBS Added C:\WINDOWS\Logs\CBS\CbsPersist_20131215075547.cab to WER report.
2014-01-21 10:45:59, Info CBS Could not get active session for current session file logging [HRESULT = 0x80004003 - E_POINTER]
2014-01-21 10:45:59, Info CBS Not able to add pending.xml to Windows Error Report. [HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]
2014-01-21 10:45:59, Info CBS Not able to add pending.xml.bad to Windows Error Report. [HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]
2014-01-21 10:47:59, Info CBS Trusted Installer is shutting down because: SHUTDOWN_REASON_AUTOSTOP
2014-01-21 10:47:59, Info CBS TiWorker signaled for shutdown, going to exit.
2014-01-21 10:47:59, Info CBS Ending the TiWorker main loop.
2014-01-21 10:47:59, Info CBS Ending the TrustedInstaller main loop.
2014-01-21 10:47:59, Info CBS Starting TiWorker finalization.
2014-01-21 10:47:59, Info CBS Starting TrustedInstaller finalization.
2014-01-21 10:47:59, Info CBS Ending TrustedInstaller finalization.
2014-01-21 10:47:59, Info CBS Ending TiWorker finalization.
Is there a way to rebuild the component store?
Thanks,
GlenHey Glen,
This log shows the exact same error that is mentioned in the comments of
this blog post, and the response is:
joscon [Microsoft]
joscon [Microsoft]
Thanks. Unfortunately, this isn't good news. The CanonicalData key is missing.
2013-08-05 11:08:32, Error CSI 00000004@2013/8/5:09:08:32.471 (F) base\wcp\componentstore\storelayout.cpp(3617): Error STATUS_SXS_COMPONENT_STORE_CORRUPT originated in function ComponentStore::CRawStoreLayout::OpenCanonicalDataKey
expression: (null)
[gle=0x80004005]
Unfortunately, its a small, but unrecreatable subset of data. If this is missing, servicing is broken on the machine and the system will need to be restored from backup or PBR.
So you will need to try a refresh or a re-install of Windows, unfortunately.
Hope this helps,
David
Windows Outreach Team - IT Pro
The Springboard Series on TechNet -
CS2 AI Error "Could Not Complete The Requested Operation" HELP!!
So I open AI this morning same as always and I get this error message "Could Not Complete The Requested Operation" Click OK and AI Crashes, reboot, restart - same thing. I did some digging around the web and found a few solutions..none worked, well sorta. If I delete all of the fonts on my machine I can get AI to open normally, as soon as I start putting fonts back in - errors start occuring again!
HELP!! I have reinstalled, also to no avail.The machine (PC WINXP) won't allow you to delete certain fonts.
I tried your idea, I have 1311 fonts currently installed, it will take hours and hours to test it out. I did some batches and AI continued to open till I got to the "C" fonts, then even 1 at a time I was never able to get AI open again. I would install a font, check AI, remove font, install a different font, check AI, same problem.
Any other suggestions?
I will try FAQ 2 -
An error was encountered performing this operation
A user with Full Control over their site is receiving this error when attempting to move a file between libraries that exist within the same site (using Content and Structure).
I am able to perform the same action with no issue (I am a site collection administrator).
I checked the logs and here is what I found:
ViewStateLog: Failed to write to the velocity cache... (EventID: ajb4s)
MoveItems: ReplaceLinksAndDelete could not find imported url for... (EventID: 7o9b)
Those are the only two errors that I get. Any help would be much appreciated.It works fine when I do it. I am a site collection administrator.
That's a good sign, it means that we can troubleshoot the permissions further. Can you verify that the user that has "Full Control" has the checkbox in the Permission Level to "Manage Site Structure"? Also, do they have Full Owner rights on both of the Document
Libraries?
One main difference is that a Site Collection Admin will always have full access to everything within the Site Collection regardless of permissions. However, a Site Owner can be blocked from accessing specific features / lists / files.
Dimitri Ayrapetov (MCSE: SharePoint) -
Please help me to delete the Dead domain (was a domain the in parent forest, but to child domain), which had trust with parent domain as well. It showing presence in Active Directory Domains & Trust also.
Please show me a path to remove dead domain.
Thank you.
-ShamilHi,
To remove a domain from a forest, we need to demote every Domain Controller in this domain or perform
metadata cleanup using ntdsutil.exe tool.
We can run Dcpromo.exe to demote a DC, please remember to select
This server is the last domain controller in the domain check
box when you are demoting the last DC in
the domain.
Please make sure that DCs in this domain don’t holder any forest-wide FSMO roles.
If all domain controllers have been taken offline without demotion process, we can
perform metadata cleanup to remove this domain.
You can use ntdsutil.exe tool to connect to the
Domain Naming Master role holder, then remove the specific domain from the forest.
For more information please refer to these articles below:
How to remove orphaned domains from Active Directory
http://support.microsoft.com/kb/230306
Remove a domain
http://technet.microsoft.com/en-us/library/cc786082(v=WS.10).aspx
I hope this helps.
Amy Wang
Maybe you are looking for
-
Help with multiple devices and one ID
I am sure this has been asked before but i apologize as I am new at all this. This is my issue... In April I bought my wife and iPad 2 signed up for an ID and started downloading apps..no problems at all so far. Within a month we had downloaded a bun
-
Anyone else seeing this? Possible bug deletes reply before posting?
I'll spend ten to twenty minutes writing a carefully researched post. No more Save function and I forget to copy it to the Clipboard and, poof, it's all gone. I don't know how. I'm using Firefox, but maybe it's happening to others using different bro
-
I'm trying to build a series of 14 different data charts in Keynote. I'm having problems creating two... Chart 1 (Line-format): This is for "Average Time" spent on a helpdesk call. For the Y-axis, I can't figure out a way to input data in a Minute:Se
-
CBO (10g): unable to estimate the good NL join cardinality
Hi all, In my 10.2.0.4 database, the CBO does not choose the good execution plan for the following query: SELECT A.CNACT, A.LCACT, I.CMECH, I.CAECH, I.CSOPT, T.COLAN, I.MTSNA FROM TPOOIN_TT T, IAVOPE I, NATACF A WHERE T.POTMP IN ('TABDJO_TT', 'TCLRJ
-
How to get previous row of result set in select query?
I want to access the previous row of an result set obtained yet, in the same selectquery . How can I do that?