Animated symbol as a preloader ?

I need some urgent help... there is any simple way to use an animated symbol as a preloader ?
Thanks in advance

Currently you are limited to using the built-in preloader options, or you can use an animated gif.

Similar Messages

  • How to trigger based play a text, video and animated symbol

    Hello
    I have an animated text followed by a video followed by animated symbol. I have a next button with the following commands
    sym.getSymbol("slide").play();
    sym.play();
    The problem:
    I can go next from the text to the video but have to wait till the video finishes playing then the symbol comes in automatically. if i click next while the video is playing. The animation progresses in the symbol and it misses the starting animation.
    What i want is while the video is playing and i click next the video stops and the slide starts to play.
    Project file here: https://www.mediafire.com/?0zv067hgt6g0l7x
    Can anyone help ?
    Thanks

    Hi
    I was facing another issue.
    As you can see in the test project. There is a video. It has a simple opacity at the end. When i enable controls for the video and pause and play in the browser to see specific parts. but what happens is that the video fades out when the playhead reaches that point and other slides fade in.
    What i want to do is when the pause button is pressed in the video, the playhead stops and only when the video has ended or the next button clicked, the next slide appears.
    Can you please tell me how to achieve this ?
    Thanks

  • Can armatures be made into nested animation (symbol/movies)?

    1) Can armatures be made into nested animation (symbol/movies)?
    I made a dragon character and animated the body with the amature(bone tool) in flash cs5.  I was having trouble trying get it to become a nested animation and make it into a symbol/movie.  I heard you are suppose to select all the animated frames using EDIT> TIMELINE>COPY FRAMES, then pasting the animated frames into new symbol/movie. I have no luck with that, the menu becomes dimmed out from copying the frame...I'm not sure if nesting animations with amatures is possible?  Any ideas?  Thanks.
    I was planning to get the body into nested animation, then attached seperate movie with flagging wings along a guide path.
    2) Second question.  I don't know why flash cs5 is exporting it's animation a lot differently from gif to swf.  In the gif format it doesn't show the nest animation.  Here's an example.  The wings on the dragon animate fine in swf format but when converted to gif.  The wings don't move.

    It's very interesting -- there's some bug in the file -- even if some layers are not visible, when I double-click the text layer you are supposed to edit (the Symbol), other layers with text start to appear...
    Not sure what's causing this. I would suggest to log a bug here:
    https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
    ...explain the steps and attache the PNG.
    And if you break the Symbol apart (select it > Modify > Symbol > Break apart) and then try to edit the text, all works normally as expected. Use this as a workaround -- I don't have a better suggestion for now...
    I have made the tests with Fw CS5...

  • Exporting animated symbol to image sequence

    Hi guys!
    I'm unable to export an animated symbol to image sequence properly because the symbol does not animate.
    I created the tweens in multiple layers, then cut-pasted all layers to a new symbol. I did this so I could then just do some tween motions on the symbol.
    The tweening is perfect, but when I export the image sequence, the images do not animate the way it does on the Flash player. All I get is an image sequence with the tweened symbol, but the symbol itself does not animate.
    I'd really appreciate if you guys could give me a tip on how to get the symbol to animate when exporting the image sequence.
    Alternatively, is there a way to motion-tween multiple layers simoultaneously? (Layers which are themselves tweened)
    Thank you guys!
    Any additional info, I'll be checking regularly so I can provide as much description as possible to get this to work.

    Ok, I figured it out!
    I changed the symbol type to "Graphic," and I was able to see the animation in the timeline. Easy!
    Now I just exported the movie to png sequence, and bam! Magic!
    If anyone has this problem, don't hesitate to ask me and I'll ellaborate on what I did.
    Thanks!

  • Can I use an animated symbol acting like a mouse cursor?

    Hi,
    I'd like to use an EDGE animated symbol ( a blinking magic wand) as my mouse cursor (hiding the original cursor) that stays on the stage all the time at a certain point in the timeline and when clicked on a hotspot, goes to another point in timeline where the symbol no longer act as a mouse cursor. I used the following code suggested in the following thread by YOSHIOKA Ume
    Re: How to I have an animated symbol follow the coordinates of the cursor when clicked?
    1:create a symbol named "Symbol_1"
    2:add this code on Symbol_1-Timeline.complete.
    //delete this instance when timeline complete. sym.deleteSymbol();
    3:add this code on document.compositionReady.
    //on/off mousemove event handler method
    sym.$("Stage")  
    .mouseover(function(){    
    sym.$("Stage").on("mousemove",draw);  
    //create instance of Symbol_1 on stage.
    function draw(evt){  
    var instance = sym.createChildSymbol("Symbol_1", "Stage");  
    instance.getSymbolElement().css({    
    position:"absolute",    
    top:evt.clientY,    
    left:evt.clientX   });
    But the problem is, the symbol is being repeated/drawn one after another according to the above code, which I don't want. Changing the cursor using CSS requires a URL of a image file, not a symbol inside EDGE as it seems. How can I get back the normal mouse cursor in another point in the timeline (and go back to the animated symbol mode again if needed?). If I click on another hotspot element on the stage, do I actually click on the attached symbol as a cursor? Or the hotspot?
    Also, how can I put a constraint on the cursor so that it stays within a certain rectangular area smaller than the stage?
    A suggestion is much appreciated.

    Here is a example I had to move a symbol around as a mouse cursor and play different part of the symbol timeline based on user action.
    mouseCursor.zip - Google Drive
    To constraint the symbol to stage area,check for the x and y values in the event callback function before moving the symbol.
    To get back the normal cursor set the css back to default
    ex: sym.getSymbol('Stage').getSymbolElement().css({ 'cursor' : 'default'});

  • Animation symbols not running smoothly in interactive pdf

    I created an animated symbol on flash and placing it on the interactive pdf has been quite successful, except it does not animate as smoothly as I hoped it would.
    Instead of looping a smooth animation on its own it requires the mouse to be hovered over the element area in a kind of sweeping motion in order for it to play keyframes, and sometimes with relatively smooth success and other times not. I've tried running the pdf in adobe reader in different computers and achieve the same results.
    It was made for the NavCardSelected instance and the symbol itself is a relatively simple 'growing vine' animation, if that helps elaborate any more. Anyone have some kind of workaround to this?

    I would check the Flash/SWF code to see if it requires any special events to be sent.
    From: Adobe Forums <[email protected]<mailto:[email protected]>>
    Reply-To: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>>
    Date: Thu, 26 Jan 2012 22:26:58 -0800
    To: Leonard Rosenthol <[email protected]<mailto:[email protected]>>
    Subject: animation symbols not running smoothly in interactive pdf
    animation symbols not running smoothly in interactive pdf
    created by michpan<http://forums.adobe.com/people/michpan> in Acrobat SDK - View the full discussion<http://forums.adobe.com/message/4168230#4168230

  • How to alter instances of animated symbols

    I am stumped as to how to use an animated symbol repeatedly in a timeline while being able to alter its visual qualities without breaking the animation motion.
    I make a simple 3-layer animation of a body with two legs doing a walk cycle in place.
    I convert the completed animation as a new graphic symbol in the library.
    I can then drag copies of that animated symbol to different timeline layers and alter their overall scales or give them each additional motions with a motion tween so various versions of it can move across the stage independently with tweens while keeping the walk cycle movements of the symbol.
    So far so good, but...
    I can change the colour properties of the added symbols but this only affects the whole image, so if the object had a body and legs in different colours, altering the properties changes all of the body parts to the same colour. Doing this does preserve the walk cycle motion, but the new object looks crude because it has become all one colour.
    If I break the symbol apart, I can then alter the visual properties of the components individually, but then it loses its animation motion.
    Whether I just group it again or convert it to a new symbol, it has lost the animation motion (the walk cycle of the legs) of the original.
    I can't figure out how to make such an animated symbol so that I can reuse it in the timeline while changing its visual properties (so it looks like a different character in the story) and yet keep its original animation motion.
    I have tried to duplicate the symbol and to copy and paste the motion but nothing seems to work.
    Can anyone please advise on what I may be doing wrong or if this even possible in Flash CS3?
    Thanks for any advice.

    Hi Luis
    I suggest you could create each part of the body and legs as separate MovieClips (which converting to a symbol choose "Movie Clip" instead of "Grpahic0 and then form the whole body with these pieces.
    Now you could group all of the separate pieces in to a single MovieClip by choosing all of them and converting to a "Movie Clip" symbol.
    This way you could change the properties of each of the parts.
    Hope this helps.
    Karthik

  • Animation/Symbol problem

    Hi,
    Im new so please forgive me, Im having a problem with
    creating a cyclic animation for a comedy horse. I want to create
    the animation, with its own timeline and import that to the stage,
    where i can then animate the self contained clip across the stage.
    So, ive got a blank stage, inserted an empty symbol (movie
    clip), then in symbol editing mode ive created my animation
    completely from movie clip symbols... breath...
    So when i return to the empty stage, i import my animated
    symbol and if i double click it, i can see my animated frames. Back
    to stage, insert frames on my timeline and motion tween between
    them, and...... nothing. My animation simply '' tweens'' across the
    stage, but without the original moving body parts.
    Ive also tried another method, where I created the animation
    using lyers of symbols for the seperate elements, and then tried to
    create an animated symbol from those layers and prserve the
    animated features when i put it onto a new stage.
    Im obviously going about this the wrong way, can anyone help?
    Thanks in advance

    The animation of the horse moving its legs should be a
    movieclip symbol. This symbol can contain a series of frames where
    each frame shows the body parts slightly different from the next
    frame, like a film strip or a book where you doodle in the corner
    of each page and then flip thru them to see movement. The pieces
    within each frame can be symbols or simply drawn elements. You
    should be able to place this on the stage, select Control ->
    Test Movie and see it animating in place.
    The animation of that movieclip symbol moving across the
    stage could be a tweened animation, where you place the symbol at
    one end of the stage in the first frame, and then another instance
    of it at the other end of the stage for a frame somewhere down the
    timeline and add a motion tween to the first frame.
    As long as you are then selecting Control -> Test Movie,
    you should see the horse galloping across the stage.
    If that's what you think you have, then something got missed,
    so what you might try is to make something much simpler and get
    that working first, such as a square spinning. You don't need to
    use a symbol for the individual frames, you can just draw a square
    and for each frame have it rotated 45 degrees.

  • Animation symbol keeps looping

    I am not sure if i am doing this even the way but here is what i did
    i created 3 animation symbols from scratch meaning (edit--insert--symbol--animation)
    i called them animi1, animi2, animi3
    each of them has graphic symbols within them
    animi1 has 53 frames
    animi2 has 46 frames
    animi3 has 17 frames
    animi4 has 55 frames
    now i went back to the main canvas where i had 1 frame and added animi1 from my library.. it automatically added the frames (53)
    now i went to frame 43 and added animi2 from my libraryand it asked me to add frames and i said yes
    etc.. for animi3 and animi4
    my problem is i want when animi1 finishes it stops at its last frame (no looping) when i try to set it to no looping (on editing the symbol) is accepts it but when i press done and go back and edit it again to make sure it automatically sets it back to forever loop
    same thing to animi2 and animi3 and animi4
    Am i doing something wrong?? please help.
    layth

    That's a lot of frames!
    It would be more helpful if you could share the file, but one quick question: Are you previewing the animation in a browser? Does the looping occur there?
    OK that was two questions.
    I do not believe you can set independent looping scenarios for different animations when they are combined as one single animation. The main animation used in this new file should be what controls the entire animation.
    Jim Babbage

  • Swap a animated symbol by another animated symbol ?

    Hi can we swap a animated symbol by another animated symbol in Edge Animate ? (like what we can do in Flash ?)

    I totally agree. I think we asked for it a long time ago!

  • Issues animating symbol from another nested symbol instance

    Got quite the weird issue here regarding animating a symbol when mousing over and/or out of a symbol nested inside a symbol. You can see the example here. Rollover the word VISION. What happens is another symbol animates downward using JQuery's animate feature. Mousing out brings it back up.
    What's actually happening? The symbol at times animates up and down uncontrolably. It eventually stops, but not necessarily in the correct spot. Is it because of all the nesting? I'm trying to keep this as clean as possible which is why I'm nesting symbols. Much like I would a Flash comp way back when.
    Here's the mouseover code for btnVision:
    var myBtnVision = sym.getSymbol("btnVision");
    myBtnVision.play();
    try {
        var stage = sym.getComposition().getStage()
        stage.$("secVision").animate({top: 100}, { duration: 1000 });
    } catch (error) {
        if (console && console.error) console.error("An error occured: "+error.toString(), error);
    and here's the mouseout:
    var myBtnVision = sym.getSymbol("btnVision");
    myBtnVision.playReverse(500, false);
    try {
        var stage = sym.getComposition().getStage()
        stage.$("secVision").animate({top: 70}, { duration: 1000 });
    } catch (error) {
        if (console && console.error) console.error("An error occured: "+error.toString(), error);
    I have a dropbox file with the examples at the following:
    https://www.dropbox.com/s/ccgapo20p233h7z/rollover.zip

    Solved! It was just a little extra JQuery code that did the trick. Basically inserting a stop action.
    try {
        var stage = sym.getComposition().getStage()
        stage.$("secVision").stop().animate({top: 100}, { duration: 1000 });
    } catch (error) {
        if (console && console.error) console.error("An error occured: "+error.toString(), error);

  • Embedded animated Symbols won't export as sequence

    FLASH CS5 using Windows XP. I have created an animation that I want to export to sequence of .png files. The file has Symbols that contain embedded animations.
    For instance, I have a flashing light in one Symbol. That is embedded in a bouncing police car Symbol. The police car Symbol (with the embedded flashing light) is brought onto a flat bed truck at the "scene" level which is driving down a road. It all looks nice if I render an internal swf file. However, when I export the individual frames, all that is rendered is the flat bed moving down the road. The bouncing car and the flashing light are there but without the animation of each.
    Does someone know how to export an animated sequence that include the animations embedded in its Symbols?
    Thanks,
    Klaaninka

    you cannot change a movie clip into a symbol, it will be converted into a still image.

  • CS5 animation symbol replacement question....

    Sooo, my company (FB games) has fired everyone who knew what they were doing leaving me, with no knowledge of flash, staring at my to-do list near tears, unable to complete basic tasks.
    I need to take an existing walk cycle animation and replace the character with another design. After breaking the new character body into symbols, I've tried to sub them in using swap symbol. The body parts do not line up with the previous symbols, and they also seem to go flying all over the place when I run the cycle. I can't figure out how to just update the symbols without disrupting the placement. What am I doing wrong? Help me keep the job I am completely unqualified for!

    To make sure you're starting with everything lining up right, try "duplicating" the symbol you want to swap out and then manually lining up your new elements over the top of the old ones on a new layer. When they're positioned, delete the layer with the old elements or set it to "guide", if you want to keep it for reference. Duplicate is an option inside of the swap symbol dialog options. Its to the left, I think. There are alot of attributes applied to symbols when they're being animated, sometimes the animator will move the pivot point of a symbol for rotating it against an elbow or something, and if you swap in something new those attributes are, I believe preserved - which can be confusing if they're not related to whats actually now contained in the symbol, visually. So, like Ned said, you need to make sure, since symbols have their own interior sets of coordinates, etc, that your new pieces are totally aligned with where the old ones were - INSIDE the symbol that is being animated. Hope that helps.

  • CS4 - Trying to make a simple walking animation symbol

    I've searched everywhere online, and can't find the help for this!
    I've found some videos, but they did not seem to offer any sort of help for me.
    I still cannot for the life of me figure out how to take 3 images, and make them into a simple walking animation and to convert that to one symbol.
    Can anyone offer their help to me please so I can get my project going?
    I'm using CS4, and all articles I can find are of the older versions of flash.

    I managed to figure out how to do it, and yes it was as you stated. I was trying to use motion before to make my images animate together, and now I realized that that is not how to do it.

  • Centering an animated symbol

    I have read just about everything I can find on the subject of centering a symbol on a fluid layout and can find no solution that works for me.
    http://www.avatarea.com/blocks/
    will show you where I am at. The floating symbol which contains some 17 animated images and is 2445px wide needs to sit in the center under the banner.
    I have used this code :
    // center symbol horizontally
    sym.$("blocks").css({
       width : '2445px',
       margin : '0 auto',
       position: 'relative'
    recommended on an earlier post and it just doesnt do it.
    any suggestions would be seriously helpful.

    You know what, just a few moments ago I did the same as you. Simplified
    it ala KISS
    Made a simple symbol and slowly complicated it once it was centered. I
    have no idea what was causing it to refuse to center but now, it does.
    What I did notice was that there seems to be something squirrely about
    the way symbols are named. For example in my library, a symbol is named
    Symbol_2 but, in the time line its called Symbol_22. There seems to be a
    hidden protocol that names symbols what the hell it likes I think I
    must now always keep an eye on what the symbol is called within the
    timeline and not refer to the symbol library. Probably an instance issue..
    I really appreciate your taking the time to reply. As soon as I get this
    page up in a close to finished test format Ill post again
    once again, many thanks.

Maybe you are looking for