Another 10.4.9 issue
Since installing the 10.4.9 update my macbook has been running abonormaly slow; its taking a good 30-40 seconds for a page to load, and ive checked my bandwidth on about 10 differnt sites now and its at 4500k. ichat is also giving me some problems when starting up. Im fairly new to osx, so any help would be greatly appreciated.
Note: i tried clearing my history and cache with safari and its still slower than my granny running a 10k race.
-thanks
Mac OS X (10.4.9) Black MacBook Core Duo 2.0Ghz
Also repair permissions and verify disk (use Disk
Utility in the Applications/Utilities folder). Does
Firefox have the same performance problems as Safari?
after repairing the disk permissions, it seems to be working much better.
thanks
Similar Messages
-
I can't eject ("files in use by another application") Windows/Vista Issue?
OK... so in the grand scheme of things, this really is NOT the end of the world... but it sure is super-annoying!! This is my first every Apple product (took a while to get on the bandwagon) and I was hoping for more stability and ease of use... I've called AppleCare several times and they can't help me figure this out... according to them it's a Windows/Vista issue (which DOES seem likely). I'm running Windows Vista Home Premium on a Dell Dimension E521.
Here's how it goes... I plug my iPod in, which opens up iTunes and it syncs fine. I wait until the top of iTunes says "sync complete" and the face of the iPod simply says "Connected". Then I click on the "eject" button next to the iPod listing in iTunes. It pauses for a moment, then I look down and the iPod suddenly has those syncing, circular arrows, moving again and it says "Synchronizing- do not disconnect". And then a few moments later, iTunes gives me a pop-up that says " XXXX ipod cannot be ejected because it contains files that are in use by another application"
So obviously, something else is connecting to the iPod and preventing me from ejecting it using iTunes, but I have not been able to figure out what it is!
Since it's something on my machine, I have tried the following:
- shut down AntiVirus (TrendMicro Internet Security 2008)
- turned off Windows Firewall
- went through all the programs running in the task bar and turned them off
- opened up Task Manager and turned EVERYTHING else I could see off
None of the above have made any difference. The workaround that Apple gave me was to go into Computer and then right click on the listed drive and select "Safely Remove" which usually works (the times it doesn't work, it gives a similar message saying the device was being used by another application and can't be removed, try again later). But 90% of the time it works.
I use that or the Eject option when I right click on that drive (not sure the difference, they seem to do the same thing). The workaround works, but I'd sure LOVE to get iTunes to be able to eject my iPod!!
Here's what I've done regarding this iPod and iTunes:
- reset the iPod
- restored the iPod
- uninstalled and re-installed iTunes
- selected and unselected the various things I'm syncing (currently: Music, TV Shows, Podcasts, Photos) to see if it was one of them causing the issue
NONE of the above has made any difference (and I've done each about 2-3 times, ZERO exaggeration).
I've called into AppleCare about half a dozen times now, hoping to get that one brilliant tech that knows more than the others... but no luck yet... so I thought I'd try this forum to see if one of the brilliant posters here can help me sort this out.
PLEASE- ANY help you can provide (or even just point me in the "right" direction of how to determine this) would be GREATLY appreciated!!
Thanks so much in advance,
SCI am using windows Vista and having this problem also (not exactly, but iTunes gives pop-up that "files are in use"). Acting a suggestion from another answer in this thread, I clicked on Computer and selected eject...windows did warn me that the device was in use, but also gave me a CONTINUE button, which I clicked and it was ejected...had to go back to iTunes and eject the iPod there also, but it did eject
-
Error while activating DSO after loading from another DSO..Production issue
Hello Gurus,
I got an error while activating DSO2 after loading from another DSO1.
DSO1 load and activation was sucessful but while loading from DSO1 to DSO2 load was fine but got error while activating...
>Error when assigning SID: Action VAL_SID_CONVERT table ZWEEK_NUM
>Value u201809u2019 of characteristic ZWEEK_NUM is not a number with 000004 spaces
this theard was posted after searching for related post in SDN.
and i tried Function Module RSODS_CHECK_RSODSACTUPDTYPE but it is not available .. but I used this in BW 3.10u2026..
is their any similar Function Module in BI 7.0 please advice.
We are using SAP NetWeaver BI 7.0
Release- 700 Service level- 017
Thanks in advance
Sandysloved the issue......
it was due to wrong data for the related field...
it must be "0009 "
Thanks for ur support. closing the ticket
Regards
Sandy -
Collapsible Panel within another Collapsible Panel HEIGHT ISSUE
Having an issue with the height of a collapsible panel that has another collapsible panel within it not adjusting. I am using Dreamweaver CS5.
When I try the fix of changing line 431 in .js (where you change "px" to "auto" where it says this.content.style.height = this.toHeight + "auto";) it does not work in IE7 or Firefox. If I change the height inferences in the .js on lines 392, 431, and 439--it worksperfect in Firefox, however it throws an error in IE7. Anyone have a clue???
Here is my page: http://www.l-3choosewisely.com/dev/
username: owl
password: l3ae2011
Help would be greatly appreciated. PLEASE PLEASE PLEASE help me!For right now I have "semi-fixed" the issue, by adding a min-height to my second collapsible panel set, but really am NOT HAPPY
with it... please help me, it has to be something with the auto-height... I know I am looking right at it and just not seeing it. -
Another Dual Layer Break Issue
Encore CS5.1
After about 12 hours, I am no further forward... Having trawled through a number of posts on this and similar subjects I am really up against the buffers.
The requirement is simple - getting Abobe Encore CS5.1 to "see" my request to use a Chapter Marker it gives me as one of three in the Manual Option section during the build process.
I had no issues with DL authoring in CS4, but CS5 is giving me a lot of grief.
The outline:
I have a timeline of 67 minutes with 6 Chapter Markers. The first two are within the first 10 minutes, CH3 at 36 minutes, CH4 at 38 minutes, CH5 at 41 minutes and CH6 at 61 minutes.
I am using Verbatum DL +R DVDs (I have used no other these last three years) with a write speed of x4 or x2.4.
Once I have built the NEW project, imported the video and placed the Chapters as above (all except CH3 at fade-to-black points) I select 8.54 GB dual layer, Side one, Manual and proceed.
At the invitation to select the manual point Encore offers me CH3, CH4 and CH5. No matter what I select, it places the break point at about 33 minutes (about half way) and in doing so screws up my own Chapters by placing it's own (invisible in the timeline) chapter thereby shuffling all mine. As a result I lose sections or get repeated sections.
I tried building to Folders and using ImgBurn. This confirms the insistance on using a halfway point - same too building to an Image the chapter and cell are never my selected, always a cell at about the halway point.
Adobe Encore is not recognising my selection (at its own invitation).
I have deleted the project and cache - rebooted and built the project from scratch importing the video - creating the timeline and adding the Chapters - always the same.
I have followed some of the points given using Folders in ImgBurn - it simply is not working for me. It's almost like Encore is screwing the build and the build is the same as though the settings are held in cache.
As mentioned, I have cleared all previous builds and their files and deleted the media cache with no joy.
I'm getting to the point whereby the only choice left to me is to split the project timeline and build the project as two separate DVDs (as the timeline is only just over the capacity for a single sided DVD (3 minutes).
As for PCG Edit - doesn't seem to want to run on my workstation (PC i7 24GB RAM - 3 separate drives in RAID combo and separate OS SSD).
Can someone help me find out what has happened to Encore as it does appear that after every "upgrade" somthing gets a little worse judging by my CS4 experience.
Many ThanksHi Stan,
Many thanks...
Yes, running "as admin"
Not quite with you "...too much material for a layer."
I often run to about 65 mins to just fit a single layer - perfect, but this project ran over - and I can't take anything out.
I am loath to change the sample rate as my SD quality (from a combo of AVCHD and MPEG2) Sony NX5 and Z5 really hit the spot for max res in SD (9.4 Mb/s). The Encoded spec for Encore is legal (or so it would seem) for Encore in a single layer (no issues or errored DVDs), and as I said in the OP I had no issues like this in CS4 (yes, apart from the known buggy stuff).
But why would Encore offer me a number of break points in placed chapters only to ignore them consistantly?
Another point:
My first build went through and honoured the chapters, but put the layer change halfway - but didn't screw the build. There was a production reason I had to change the timeline content - one shot change of the same duration. I would certainly settle for that at this stage. Interestingly, I built to Image and did an IMGBurn (as I do do for all DLs). But as you say, IMGBurn is choking on what's been passed to it from Encore. I am trying to replicate that first build.
By the way, all my Chapters in the timeline preview perfectly in Encore - it's just when I ask for the build it all goes wrong (seemingly).
Many thanks again Stan. Appreciate your reply. -
Yet another (different?) battery issue
I have two batteries for my Powerbook, one I keep as a spare and which has only been used about half a dozen times.
Over recent months I have noticed that the original battery (and the unused one) seemed to take an increasingly long amount of time to recharge, but in the past few days it won't seem to recharge at all. The percentage of remaining charge on both batteries will only go down, with one currently at 25% and the other at 37% and no matter which battery I have installed, whenever I click on the battery menu, in the first line it says "10:00 until full"
I've tried all the suggestions that I've seen in responses to other battery issues, including resetting the PRAM both with the four key shortcut and using open firmware and reset-nvram and reset-all. I've also tried resetting the PMU by holding down the power key, until the long bleep and I've just tried the Powerbook G4 Battery Updater, but with both batteries I get the following message "Your battery was not updated. Make sure you have a battery properly installed and then try to update your battery again. Be sure to complete the update process for this battery before starting the update of another battery"
The information in the system profiler for each battery is as follows:
Original battery -
Charge Information:
Charge remaining (mAh): 861
Charging: Yes
Full charge capacity (mAh): 3508
Health Information:
Cycle count: 110
Battery Installed: Yes
Amperage (mA): 10
Voltage (mV): 11320
Relatively new battery -
Charge Information:
Charge remaining (mAh): 1621
Charging: Yes
Full charge capacity (mAh): 4381
Health Information:
Cycle count: 3
Battery Installed: Yes
Amperage (mA): 10
Voltage (mV): 11331
I notice there is a massive difference in the "Cycle Count" for the two batteries (110 and 3) although I haven't got a clue what this means.
Any advice or suggestions would be most welcome, as at present I am worried that eventually I will have run both batteries down and there will be no point in me purchasing a new one if my laptop cannot charge it for some reason.
As ever my utmost thanks in advance to anyone who takes the trouble to get back to me
Kind Regards
Bernard
PS. the charger info in System Profiler is as follows
AC Charger Information:
AC Charger (Watts): 50
Connected: Yes
Charging: Yes
Message was edited by: tdogbThanks a million for getting back to me Louie
The ring on the power socket is orange, suggesting that it is charging. However I didn't noticed the 50watts in my System Profiler details for the AC Charger. My Power Supply says that it is a 65w one with the correct model no. for this Powerbook (I think it says A1021 on it but I don't trust my eyesight at this time of night)
Both batteries do appear to be charging but incredibly slowly. For example I have been trying to charge up the battery all week and I had it up to 33% at one stage, before I neglected to plug the power chord in when I turned it on and it slipped back down to 22%. Three days later with it plugged into the power constantly (with me using the computer only during the day and putting it to sleep at night - should it charge when in sleep mode?), it's only crept back up to 30% again.
This battery could be knackered but I hardly have used my spare battery and even that won't seem to charge any quicker
I am also pretty certain that this incredibly slow charging is a recent problem, as I've had that power supply for some time (a year maybe) and I am sure that in the past the batteries have charged up at a more normal rate.
My power supply socket got a little knock recently when I tripped over the cable (as seems to be a common problem on the old non-magnetic sockets) and since then, with the connection not being nearly so snug, it happens quite frequently that I wake the computer from sleep and only realise that the plug is slightly out of the socket when the warning comes up that the laptop will put itself to sleep because the battery is low.
As a result, where previously I was always using the power supply with the battery fully charged and the light on the ring usually green, these days it seems to be permanently orange because I keep running the battery down and in recent weeks it will not seem to charge up because it takes so much time
I am guessing that I must've bought a moody power supply (I guess cheap is cheap, as they say) but I don't think it's the source of my problem because the issue has only manifested itself recently
Many thanks as always for taking the trouble to get back to me
Best Regards
Bernard -
Yet another post about speed issues !
So had my infinity for more than 10wks now. Have been told time n time again by customer service, sales and technical help that I should get between 67 and 80 meg but after countless phone calls and apparent 'tweaks' at the exchange I'm still only getting 46 at best. Openreach engineer I spoke to in the street said it leaves the box in the street ( 2 short streets away ) at 80 so surely the problem is been m between the box and my house! Why don't they send someone to check this. One of the tech help dept even told me my line can only support 40meg and that I have been miss led over the speed! ! Though others have said I can get the higher speed. Another call back promised for today did not receive any call!
Think I'll be joining virgin when this year's contact is up, 10 months to go and counting, unless I can get out sooner for miss selling.mushka wrote:
similar prob as me,, yet john46 keeps copying/pasting same stuff week in week out im sure he works for bt as every one has issues with speed etc and he posts same thing over and over
If it's a similar problem would you not expect a similar answer! The reason you are asked to perform speed tests etc is to try and establish where the problem may be.
As most people can not be bothered or do not search the forum before posting and perhaps finding the answer it is necessary for those people who give up their own time to try and help, to post the same thing time and time again.
I just hope that if you do have a problem it is not the same as somebody else may have had since you don't seem to want a cut and paste answer. -
Yet another 3G battery charge issue/question
All...
Lately my iPhone 3G is draining it's battery much quicker than it had previously. It will not last a full day. Even with no Safari, games, music, etc. Also, when I charge it, it gets hot, more than usual.
Not sure, but I think this all started when I let the battery completely drain. I partially charged then the battery completely drained again.
I've reset shut the phone off then back on with no improvement. I've had the phone for less than a year. Apple replaced my 1st 3G with this phone due to another issue.
I'm going to let the battery completely drain then will completely charge to see if that helps. Otherwise, any ideas?
Message was edited by: Greg BegayI am having the same problem. It barely makes it through 12 hours now, when previously I was used to about 36 hours. It has only started doing it recently, but I'm not entirely sure what I've done to provoke it.
Have seen similar issues in other threads, with people suggesting restoring/updating etc. I am yet to try this so will give it a go, but not convinced it will help.
Message was edited by: bigtom182 -
Another Mavericks Random Restart issue...
I've seen lots of discussions about these issues, but nothing definitive that will simply fix our problems. For the last month I've been trying the various suggestions offered on these forums: turning off the Energy Saver stuff, auto logging in, etc, but still having intermittent random restart issues.
I called Apple this morning and went through these trouble shooting steps with their tech:
1) Reboot to Recovery Mode (cmd-r)
2) Disk First Aid to repair (success)
3) Disk First Aid to Verify Disk (no trouble found. Verified)
30 minutes after hanging up the phone, BAM. Random restart again. Seems like I'm always pressing a keyboard key or mouse clicking when this happens. No matter if it's the trackpad, the wireless Apple Mouse, a USB mouse, the built in keyboard, or my external Matias keyboard.
My next step is to appeal to the gear heads here for any assistance they can offer. Thanks in advance for any input you can provide. Here's my EtreCheck report and latest panic report:
Fri Mar 14 13:47:54 2014
panic(cpu 1 caller 0xffffff7f8626ffb0): "GPU Panic: [<None>] 5 3 7f 0 0 0 0 3 : NVRM[0/1:0:0]: Read Error 0x00000100: CFG 0xffffffff 0xffffffff 0xffffffff, BAR0 0xd2000000 0xffffff80fc329000 0x0a5480a2, D0, P3/4\n"@/SourceCache/AppleGraphicsControl/AppleGraphicsControl-3.4.35/src/Apple MuxControl/kext/GPUPanic.cpp:127
Backtrace (CPU 1), Frame : Return Address
0xffffff80f42b2d50 : 0xffffff8003e22fa9
0xffffff80f42b2dd0 : 0xffffff7f8626ffb0
0xffffff80f42b2ea0 : 0xffffff7f84aadeab
0xffffff80f42b2f60 : 0xffffff7f84b7749a
0xffffff80f42b2fa0 : 0xffffff7f84b7750a
0xffffff80f42b3010 : 0xffffff7f84df6056
0xffffff80f42b3140 : 0xffffff7f84b9ab39
0xffffff80f42b3160 : 0xffffff7f84ab48fd
0xffffff80f42b3210 : 0xffffff7f84ab2408
0xffffff80f42b3410 : 0xffffff7f84ab3d57
0xffffff80f42b34e0 : 0xffffff7f85903e1d
0xffffff80f42b3660 : 0xffffff7f85903823
0xffffff80f42b3670 : 0xffffff7f858c8af0
0xffffff80f42b3680 : 0xffffff7f858c8b65
0xffffff80f42b3690 : 0xffffff7f858aa931
0xffffff80f42b36d0 : 0xffffff7f858acea5
0xffffff80f42b3700 : 0xffffff7f858fd970
0xffffff80f42b3780 : 0xffffff7f858e5ae0
0xffffff80f42b37e0 : 0xffffff7f858e63da
0xffffff80f42b3830 : 0xffffff7f858e68c0
0xffffff80f42b38a0 : 0xffffff7f858e6fc8
0xffffff80f42b38e0 : 0xffffff7f858b3fea
0xffffff80f42b3a60 : 0xffffff7f858e3940
0xffffff80f42b3b20 : 0xffffff7f858b2ad9
0xffffff80f42b3b70 : 0xffffff80042cc7b6
0xffffff80f42b3b90 : 0xffffff80042cddb1
0xffffff80f42b3bf0 : 0xffffff80042cb81f
0xffffff80f42b3d40 : 0xffffff8003eb6558
0xffffff80f42b3e50 : 0xffffff8003e26bf1
0xffffff80f42b3e80 : 0xffffff8003e139f5
0xffffff80f42b3ef0 : 0xffffff8003e1e043
0xffffff80f42b3f70 : 0xffffff8003ec976d
0xffffff80f42b3fb0 : 0xffffff8003ef3b46
Kernel Extensions in backtrace:
com.apple.nvidia.classic.NVDAResmanTesla(8.2.4)[80472F2E-D31D-32C4-88BA-2EB3D63 C159F]@0xffffff7f84a5e000->0xffffff7f84cc6fff
dependency: com.apple.iokit.IOPCIFamily(2.9)[EDA75271-4E9D-34E7-A2C5-14F0C8817D37]@0xffffff 7f844bb000
dependency: com.apple.iokit.IONDRVSupport(2.4.1)[999E29DA-D513-3544-89D1-9885B728A098]@0xff ffff7f84a4e000
dependency: com.apple.iokit.IOGraphicsFamily(2.4.1)[4421462D-2B1F-3540-8EEA-9DFCB0565E39]@0 xffffff7f84a0b000
com.apple.driver.AppleMuxControl(3.4.35)[1BFF66C1-65E4-3BB3-9DEE-B61C3137019B]@ 0xffffff7f86262000->0xffffff7f86274fff
dependency: com.apple.driver.AppleGraphicsControl(3.4.35)[09897896-ACBD-36B5-B1D4-0CCC4000E 3B3]@0xffffff7f8625a000
dependency: com.apple.iokit.IOACPIFamily(1.4)[045D5D6F-AD1E-36DB-A249-A346E2B48E54]@0xfffff f7f84809000
dependency: com.apple.iokit.IOPCIFamily(2.9)[EDA75271-4E9D-34E7-A2C5-14F0C8817D37]@0xffffff 7f844bb000
dependency: com.apple.iokit.IOGraphicsFamily(2.4.1)[4421462D-2B1F-3540-8EEA-9DFCB0565E39]@0 xffffff7f84a0b000
dependency: com.apple.driver.AppleBacklightExpert(1.0.4)[E04639C5-D734-3AB3-A682-FE66694C66 53]@0xffffff7f8625d000
com.apple.nvidia.classic.NVDANV50HalTesla(8.2.4)[B0E6AAA7-E970-3D81-8B43-145D56 A3A4AC]@0xffffff7f84cd1000->0xffffff7f84f7afff
dependency: com.apple.nvidia.classic.NVDAResmanTesla(8.2.4)[80472F2E-D31D-32C4-88BA-2EB3D63 C159F]@0xffffff7f84a5e000
dependency: com.apple.iokit.IOPCIFamily(2.9)[EDA75271-4E9D-34E7-A2C5-14F0C8817D37]@0xffffff 7f844bb000
com.apple.GeForceTesla(8.2.4)[B6C71E9A-E304-354B-80AD-C69C9032D367]@0xffffff7f8 58a1000->0xffffff7f8596bfff
dependency: com.apple.iokit.IOPCIFamily(2.9)[EDA75271-4E9D-34E7-A2C5-14F0C8817D37]@0xffffff 7f844bb000
dependency: com.apple.iokit.IONDRVSupport(2.4.1)[999E29DA-D513-3544-89D1-9885B728A098]@0xff ffff7f84a4e000
dependency: com.apple.iokit.IOGraphicsFamily(2.4.1)[4421462D-2B1F-3540-8EEA-9DFCB0565E39]@0 xffffff7f84a0b000
dependency: com.apple.nvidia.classic.NVDAResmanTesla(8.2.4)[80472F2E-D31D-32C4-88BA-2EB3D63 C159F]@0xffffff7f84a5e000
BSD process name corresponding to current thread: WindowServer
Mac OS version:
13C64
Kernel version:
Darwin Kernel Version 13.1.0: Thu Jan 16 19:40:37 PST 2014; root:xnu-2422.90.20~2/RELEASE_X86_64
Kernel UUID: 9FEA8EDC-B629-3ED2-A1A3-6521A1885953
Kernel slide: 0x0000000003c00000
Kernel text base: 0xffffff8003e00000
System model name: MacBookPro6,2 (Mac-F22586C8)
System uptime in nanoseconds: 6346914490186
last loaded kext at 2093957006128: com.apple.driver.AppleIntelMCEReporter 104 (addr 0xffffff7f86379000, size 49152)
last unloaded kext at 2198032337307: com.apple.driver.AppleIntelMCEReporter 104 (addr 0xffffff7f86379000, size 32768)
loaded kexts:
com.quark.driver.Tether64 1.1.0d3
com.iospirit.driver.rbiokithelper 1.24
com.logmein.driver.LogMeInSoundDriver 1.0.3
com.honestech.htvad 1
com.squirrels.driver.AirParrotSpeakers 1.8
at.obdev.nke.LittleSnitch 4052
com.oxsemi.driver.OxsemiDeviceType00 1.28.13
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.driver.AppleBluetoothMultitouch 80.14
com.apple.driver.AGPM 100.14.15
com.apple.driver.AudioAUUC 1.60
com.apple.filesystems.autofs 3.0
com.apple.iokit.IOBluetoothSerialManager 4.2.3f10
com.apple.driver.AppleMikeyHIDDriver 124
com.apple.driver.AppleMikeyDriver 2.6.0f1
com.apple.driver.AppleHDA 2.6.0f1
com.apple.driver.AppleIRController 4000
com.apple.GeForceTesla 8.2.4
com.apple.driver.AppleSMCPDRC 1.0.0
com.apple.driver.AppleSMCLMU 2.0.4d1
com.apple.driver.AppleLPC 1.7.0
com.apple.driver.AppleIntelHDGraphics 8.2.4
com.apple.driver.AppleIntelHDGraphicsFB 8.2.4
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleHWAccess 1
com.apple.driver.AppleMuxControl 3.4.35
com.apple.driver.AppleUpstreamUserClient 3.5.13
com.apple.driver.AppleMCCSControl 1.1.12
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.2.3f10
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.driver.SMCMotionSensor 3.0.4d1
com.apple.driver.AppleUSBTCButtons 240.2
com.apple.driver.AppleUSBTCKeyboard 240.2
com.apple.driver.AppleUSBCardReader 3.4.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 35
com.apple.iokit.SCSITaskUserClient 3.6.6
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.5.1
com.apple.driver.AppleUSBHub 666.4.0
com.apple.driver.AirPort.Brcm4331 700.20.22
com.apple.iokit.AppleBCM5701Ethernet 3.8.1b2
com.apple.driver.AppleAHCIPort 3.0.0
com.apple.driver.AppleFWOHCI 4.9.9
com.apple.driver.AppleUSBEHCI 660.4.0
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleACPIButtons 2.0
com.apple.driver.AppleRTC 2.0
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleSMBIOS 2.1
com.apple.driver.AppleACPIEC 2.0
com.apple.driver.AppleAPIC 1.7
com.apple.driver.AppleIntelCPUPowerManagementClient 216.0.0
com.apple.nke.applicationfirewall 153
com.apple.security.quarantine 3
com.apple.driver.AppleIntelCPUPowerManagement 216.0.0
com.apple.driver.IOBluetoothHIDDriver 4.2.3f10
com.apple.driver.AppleMultitouchDriver 245.13
com.apple.AppleGraphicsDeviceControl 3.4.35
com.apple.kext.triggers 1.0
com.apple.iokit.IOSerialFamily 10.0.7
com.apple.driver.DspFuncLib 2.6.0f1
com.apple.vecLib.kext 1.0.0
com.apple.nvidia.classic.NVDANV50HalTesla 8.2.4
com.apple.iokit.IOFireWireIP 2.2.6
com.apple.driver.AppleSMBusPCI 1.0.12d1
com.apple.iokit.IOSurface 91
com.apple.iokit.IOBluetoothFamily 4.2.3f10
com.apple.iokit.IOAudioFamily 1.9.5fc2
com.apple.kext.OSvKernDSPLib 1.14
com.apple.driver.AppleGraphicsControl 3.4.35
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.driver.AppleSMBusController 1.0.11d1
com.apple.nvidia.classic.NVDAResmanTesla 8.2.4
com.apple.iokit.IONDRVSupport 2.4.1
com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.2.3f10
com.apple.driver.AppleHDAController 2.6.0f1
com.apple.iokit.IOGraphicsFamily 2.4.1
com.apple.iokit.IOHDAFamily 2.6.0f1
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.driver.IOPlatformPluginFamily 5.7.0d10
com.apple.driver.AppleSMC 3.1.8
com.apple.driver.AppleUSBMultitouch 240.9
com.apple.iokit.IOUSBHIDDriver 660.4.0
com.apple.iokit.IOUSBMassStorageClass 3.6.0
com.apple.driver.AppleUSBMergeNub 650.4.0
com.apple.driver.AppleUSBComposite 656.4.1
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.6.6
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOSCSIBlockCommandsDevice 3.6.6
com.apple.iokit.IOAHCISerialATAPI 2.6.1
com.apple.iokit.IOSCSIArchitectureModelFamily 3.6.6
com.apple.iokit.IO80211Family 630.35
com.apple.iokit.IOUSBUserClient 660.4.2
com.apple.iokit.IOEthernetAVBController 1.0.3b4
com.apple.driver.mDNSOffloadUserClient 1.0.1b5
com.apple.iokit.IONetworkingFamily 3.2
com.apple.iokit.IOAHCIFamily 2.6.5
com.apple.iokit.IOFireWireFamily 4.5.5
com.apple.iokit.IOUSBFamily 675.4.0
com.apple.driver.AppleEFINVRAM 2.0
com.apple.driver.AppleEFIRuntime 2.0
com.apple.iokit.IOHIDFamily 2.0.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 278.11
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.AppleKeyStore 2
com.apple.driver.DiskImages 371.1
com.apple.iokit.IOStorageFamily 1.9
com.apple.iokit.IOReportFamily 23
com.apple.driver.AppleFDEKeyStore 28.30
com.apple.driver.AppleACPIPlatform 2.0
com.apple.iokit.IOPCIFamily 2.9
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.pthread 1
com.apple.kec.corecrypto 1.0
=========================
Hardware Information:
MacBook Pro (15-inch, Mid 2010)
MacBook Pro - model: MacBookPro6,2
1 2.53 GHz Intel Core i5 CPU: 2 cores
8 GB RAM
Video Information:
Intel HD Graphics - VRAM: 288 MB
NVIDIA GeForce GT 330M - VRAM: 256 MB
System Software:
OS X 10.9.2 (13C64) - Uptime: 0 days 0:13:4
Disk Information:
Hitachi HTS541010A9E680 disk0 : (1 TB)
EFI (disk0s1) <not mounted>: 209.7 MB
1TBHD (disk0s2) / [Startup]: 999.35 GB (124.43 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
MATSHITADVD-R UJ-898
USB Information:
Apple Internal Memory Card Reader
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Apple Inc. Built-in iSight
FireWire Information:
Thunderbolt Information:
Configuration files:
/etc/hosts - Count: 60
Kernel Extensions:
com.oxsemi.driver.OxsemiDeviceType00 (1.28.13 - SDK 10.5)
at.obdev.nke.LittleSnitch (4052 - SDK 10.8)
com.iospirit.driver.rbiokithelper (1.24 - SDK 10.6)
com.squirrels.driver.AirParrotSpeakers (1.8 - SDK 10.8)
com.honestech.htvad (1 - SDK 10.6)
com.logmein.driver.LogMeInSoundDriver (1.0.3 - SDK 10.5)
com.quark.driver.Tether64 (1.1.0d3 - SDK 10.6)
Startup Items:
APCTrackerServer: Path: /Library/StartupItems/APCTrackerServer
DynDNSUpdater: Path: /Library/StartupItems/DynDNSUpdater
Squeezebox: Path: /Library/StartupItems/Squeezebox
Launch Daemons:
[System] at.obdev.littlesnitchd.plist 3rd-Party support link
[System] com.adobe.fpsaud.plist 3rd-Party support link
[System] com.adobe.SwitchBoard.plist 3rd-Party support link
[System] com.adobe.versioncueCS4.plist 3rd-Party support link
[System] com.barebones.bbedit.plist 3rd-Party support link
[System] com.bombich.ccc.plist 3rd-Party support link
[System] com.caphyon.awrserver.plist 3rd-Party support link
[invalid] com.dymo.pnpd.plist
[System] com.google.keystone.daemon.plist 3rd-Party support link
[System] com.hidden.daemon.plist 3rd-Party support link
[System] com.iospirit.candelair.daemon.plist 3rd-Party support link
[System] com.iospirit.candelair.sync.plist 3rd-Party support link
[System] com.lacie.desktopmanager.service.plist 3rd-Party support link
[System] com.logmein.logmeinblanker.plist 3rd-Party support link
[System] com.logmein.logmeinserver.plist 3rd-Party support link
[System] com.logmein.raupdate.plist 3rd-Party support link
[System] com.oracle.java.Helper-Tool.plist 3rd-Party support link
[System] com.rogueamoeba.hermes.plist 3rd-Party support link
[System] com.tether.plist 3rd-Party support link
Launch Agents:
[System] at.obdev.LittleSnitchUIAgent.plist 3rd-Party support link
[System] com.adobe.AAM.Updater-1.0.plist 3rd-Party support link
[System] com.adobe.AdobeCreativeCloud.plist 3rd-Party support link
[System] com.adobe.CS4ServiceManager.plist 3rd-Party support link
[System] com.adobe.CS5ServiceManager.plist 3rd-Party support link
[System] com.extensis.FMCore.plist 3rd-Party support link
[System] com.google.keystone.agent.plist 3rd-Party support link
[System] com.lacie.eventsactions.launcher.agent.plist 3rd-Party support link
[System] com.logmein.logmeingui.plist 3rd-Party support link
[System] com.logmein.logmeinguiagent.plist 3rd-Party support link
[System] com.logmein.logmeinguiagentatlogin.plist 3rd-Party support link
[System] com.oracle.java.Java-Updater.plist 3rd-Party support link
User Launch Agents:
[not loaded] com.adobe.AAM.Updater-1.0.plist 3rd-Party support link
[not loaded] com.adobe.ARM.[...].plist 3rd-Party support link
[not loaded] com.c-command.SpamSieve.LaunchAgent.plist 3rd-Party support link
[not loaded] com.cnet.ttengine.plist 3rd-Party support link
[not loaded] com.facebook.videochat.[redacted].plist 3rd-Party support link
[not loaded] com.spotify.webhelper.plist 3rd-Party support link
[not loaded] ws.agile.1PasswordAgent.plist 3rd-Party support link
User Login Items:
Default Folder X Helper
Dropbox
FastScripts
Fantastical
Creative Cloud
Internet Plug-ins:
JavaPlugin2_NPAPI: Version: 14.9.0 - SDK 10.7
AdobePDFViewerNPAPI: Version: 11.0.04 - SDK 10.6 3rd-Party support link
Flash Player: Version: 12.0.0.77 - SDK 10.6 3rd-Party support link
AdobePDFViewer: Version: 9.3.0 3rd-Party support link
LogMeInSafari32: Version: 1.0.961 - SDK 10.7 3rd-Party support link
Photo Center Plugin: Version: Photo Center Plugin 1.1.2.2 3rd-Party support link
googletalkbrowserplugin: Version: 5.1.7.17873 3rd-Party support link
iPhotoPhotocast: Version: 7.0
DYMO Safari Addin: Version: (null) - SDK 10.4 3rd-Party support link
DirectorShockwave: Version: 11.5.2r602 3rd-Party support link
Yahoo! Installer 3: Version: 1.0.128 3rd-Party support link
FlashPlayer-10.6: Version: 12.0.0.77 - SDK 10.6 3rd-Party support link
AdobeAAMDetect: Version: AdobeAAMDetect 2.0.0.0 - SDK 10.7 3rd-Party support link
AmazonMP3DownloaderPlugin: Version: AmazonMP3DownloaderPlugin 1.0.17 3rd-Party support link
QuickTime Plugin: Version: 7.7.3
AmazonMP3DownloaderPlugin1017277: Version: AmazonMP3DownloaderPlugin 1.0.17 3rd-Party support link
Silverlight: Version: 5.1.10411.0 - SDK 10.6 3rd-Party support link
npgtpo3dautoplugin: Version: 0.1.44.29 - SDK 10.5 3rd-Party support link
LogMeIn: Version: 1.0.961 - SDK 10.7 3rd-Party support link
Google Earth Web Plug-in: Version: 5.2 3rd-Party support link
Default Browser: Version: 537 - SDK 10.9
DYMO NPAPI Addin: Version: 1.0 - SDK 10.4 3rd-Party support link
Flip4Mac WMV Plugin: Version: 3.0.0.126 - SDK 10.8 3rd-Party support link
o1dbrowserplugin: Version: 5.1.7.17873 3rd-Party support link
JavaAppletPlugin: Version: Java 7 Update 45 Outdated! Update
OfficeLiveBrowserPlugin: Version: 12.3.2 3rd-Party support link
Safari Extensions:
FastestTube: Version: 2.2.1.4
Web Snapper: Version: 3.2
AddThis: Version: 1.7
Ultimate Status Bar: Version: 1.2.5
1Password: Version: 4.1.0
Make It Short: Version: 1.5
Twitter for Safari: Version: 1.02
Add To Amazon Wish List: Version: 1.4
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
InstantOn: Version: 7.1.2 - SDK 10.8 3rd-Party support link
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
User Internet Plug-ins:
CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 3rd-Party support link
3rd Party Preference Panes:
Adobe Version Cue CS4 3rd-Party support link
Aqueiss 3rd-Party support link
TechTracker 3rd-Party support link
Default Folder X 3rd-Party support link
Flash Player 3rd-Party support link
FlexCal 3rd-Party support link
Flip4Mac WMV 3rd-Party support link
Growl 3rd-Party support link
Java 3rd-Party support link
Logitech Control Center 3rd-Party support link
MacFUSE 3rd-Party support link
Perian 3rd-Party support link
RemoteTap 3rd-Party support link
Secrets 3rd-Party support link
SneakPeek Pro 3rd-Party support link
SynergyKM 3rd-Party support link
Old Applications:
Aimersoft DVD Ripper: Version: 2.6.1 - SDK 10.5 3rd-Party support link
RockMelt: Version: 0.9.50.549 - SDK 10.5 3rd-Party support link
Tether: Version: 2.1.0.3 - SDK 10.4 3rd-Party support link
Capster: Version: 1.6.5 - SDK 10.0 3rd-Party support link
Screenium: Version: 2.1.8 - SDK 10.5 3rd-Party support link
DYMO Label: Version: 8.4.1.1803 - SDK 10.4 3rd-Party support link
Dialectic: Version: 1.8.1 - SDK 10.5 3rd-Party support link
Transmit: Version: 4.1.7 - SDK 10.5 3rd-Party support link
SuperDuper 264: Version: 2.6.4 - SDK 10.4 3rd-Party support link
SuperDuper!: Version: 2.7.1 - SDK 10.4 3rd-Party support link
Remote Buddy: Version: 1.24.3 - SDK 10.4 3rd-Party support link
/Applications/Remote Buddy F/Remote Buddy.app
/Library/Frameworks/DYMO/DLS8/Addins
DYMO Excel Addin: Version: 8.4.1.1803 - SDK 10.4 3rd-Party support link
DYMO Word Addin: Version: 8.4.1.1803 - SDK 10.4 3rd-Party support link
SLLauncher: Version: 1.0 - SDK 10.5 3rd-Party support link
/Library/Application Support/Microsoft/Silverlight/OutOfBrowser/SLLauncher.app
Endicia: Version: 2.13.4 - SDK 10.5 3rd-Party support link
/Applications/Endicia/Endicia.app
Microsoft AutoUpdate: Version: 2.3.3 - SDK 10.4 3rd-Party support link
/Library/Application Support/Microsoft/MAU2.0/Microsoft AutoUpdate.app
Aimersoft Helper Compact: Version: 2.2.5.6 - SDK 10.5 3rd-Party support link
/Users/[redacted]/Library/Application Support/Helper/Aimersoft Helper Compact.app
/Applications/iWork '09
Time Machine:
Skip System Files: NO
Mobile backups: ON
Auto backup: YES
Volumes being backed up:
1TBHD: Disk size: 930.71 GB Disk used: 814.83 GB
Destinations:
LaCie [Local]
Total size: 931.19 GB
Total number of backups: 21
Oldest backup: 2014-02-03 06:44:05 +0000
Last backup: 2014-03-13 14:14:06 +0000
Size of backup disk: Too small
Backup size 931.19 GB < (Disk used 814.83 GB X 3)
OWC 4TB HD [Local] (Last used)
Total size: 4
Total number of backups: 40
Oldest backup: 2013-05-29 23:16:35 +0000
Last backup: 2014-03-13 21:43:22 +0000
Size of backup disk: Excellent
Backup size 4 > (Disk size 930.71 GB X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
Top Processes by CPU:
92% Dropbox
5% WindowServer
1% EtreCheck
1% Little Snitch Agent
0% Creative Cloud
Top Processes by Memory:
369 MB Safari
147 MB soagent
147 MB Dock
139 MB Finder
123 MB mds_stores
Virtual Memory Information:
2.66 GB Free RAM
3.49 GB Active RAM
762 MB Inactive RAM
1.11 GB Wired RAM
507 MB Page-ins
0 B Page-outsYou have a lot of 3rd party software installed which could be the problem. The below show in the crash report. Try uninstalling them using the developer's uninstall instructions.
com.quark.driver.Tether64 1.1.0d3
com.iospirit.driver.rbiokithelper 1.24
com.logmein.driver.LogMeInSoundDriver 1.0.3
com.honestech.htvad 1
com.squirrels.driver.AirParrotSpeakers 1.8
at.obdev.nke.LittleSnitch 4052
com.oxsemi.driver.OxsemiDeviceType00 -
Yet another cant send mail issue
Hi, I am going nuts here!! At home I have Comcast and my dotmac account works via port 25 no set up, perfect. I am now in another house with comcast and I cannot send anything. I telnetted port 25, nothing shows, so I contacted Comcast and they sent me this url http://www.comcast.net/help/faq/index.jsp?faq=EmailMail_(Mac)17798 it seems to have ALL the answers, but I am just going round in circles.
Assume I want to set up for traveling purposes. I set up a new account POP, used dotmac info for incoming mail/server info and for outgoing server I have smtp.comcast.net, I use the 465 port with ssl, and for the password authentication I use my dotmac name and password.
In advanced I use 995 port and ssl.
This info seems good to go, but when I try to send I always get the dialog box The SMTP server “smtp.comcast.net” rejected the password for user “dotmac account”.
I just cant work out why it wont accept the password. Should I have some extra comcast info?
this is madness, but oh well, is there an answer out thereChecking Comcast's website, Comcast's SMTP server settings should be as follows:
SMTP Server: smtp.comcast.net
Server Port: 587
Use SSL: Off or not selected.
Authentication: Password
User Name: The portion of your Comcast email address in front of the @ sign only.
Password: Your Comcast account password - the same password used to check the incoming mail server for new messages.
.Mac's SMTP server settings should be as follows:
SMTP Server: smtp.mac.com
Server Port: 587
Use SSL: On/Selected but isn't required.
Authentication: Password
User Name: The portion of your .Mac email address in front of the @ sign only.
Password: Your .Mac account password - the same password used to check the incoming mail server for new messages.
These settings will not guarantee being able to send messages with either account and SMTP server when traveling and not connected to the internet with Comcast. This is determined by the ISP being used to connect to the internet since all ISPs have restrictions on using an SMTP server that is outside of their network or not provided by the ISP.
You can use .Mac's authenticated SMTP server to send messages with your .Mac account only but you can use Comcast's authenticated SMTP server to send messages with your .Mac account when connected to the internet with Comcast. -
Another message mapping complex issue part 2
Hi All.
In addtion to my previous question , thers has been another requirement.
I have to map one field on the condition of another field
the new source can be like this
<Header>
<seg24>
<matpos>10</matpos>
<seg12>
<matdesc>red</matdesc>
<length>100</length>
</seg12>
<seg12>
<matdesc>green</matdesc>
<length>200</length>
</seg12>
<seg12>
<matdesc>black</matdesc>
<length>300</length>
</seg12>
</seg24>
<seg24>
<matpos>20</matpos>
<seg12>
<matdesc>green</matdesc>
<length>200</length>
</seg12>
<seg12>
<matdesc>black</matdesc>
<length>300</length>
</seg12>
</seg24>
<seg24>
<matpos>30</matpos>
<seg12>
<matdesc>red</matdesc>
<length>500</length>
</seg12>
<seg12>
<matdesc>green</matdesc>
<length>800</length>
</seg12>
<seg12>
<matdesc>black</matdesc>
<length>900</length>
</seg12>
</seg24>
<seg24>
<matpos>80</matpos>
<seg12>
<matdesc>red</matdesc>
<length>400</length>
</seg12>
<seg12>
<matdesc>green</matdesc>
<length>800</length>
</seg12>
<seg12>
<matdesc>black</matdesc>
<length>900</length>
</seg12>
</seg24>
<LineItem>
<Itempos>30</Itempos>
<Itempos>10</Itempos>
</LineItem>
<LineItem>
<Itempos>20</Itempos>
<Itempos>80</Itempos>
<Itempos>90</Itempos>
</LineItem>
</Header>
seg12 is a sub segment of seg 24
the target can be like this
<Target>
<field1></field1>
<field2></field2>
<targetitempos></targetitempos>
<targetlength></targetlength>
</Target>
I have to create one <Target> node for each LineItem, in this case 2 <Target> node and map the first found <Itempos> to targetitempos
I have only to map the <lenght> to <targetlength>.if the <matdesc> is red.
for this I have to compare the Itempos and matpos.
first map <LineItem> -
> <Target>
then
<Itempos> -
> split value targetitempos
so far so good but my problem is when mapping the <length>
if <matdesc> is red
and
if Itempos (sort ascending )eq matpos
then
<length> -
> <targetlength>.
the result I am getting is 2 <Target> node
<Target>
<targetitempos>30</targetitempos>
<targetlength>500</targetlength>
</Target>
which is correct
but the second one is getting the targetlength from another <matpos> and putting it into the <Target> node with the <targetitempos> 20 , which is the first position of <Target> node 2
<Target>
<targetitempos>20</targetitempos>
<targetlength>400</targetlength>
</Target>
now <matpos>20 in seg 24 does nor have any lenght neither any seg12 but it is taking it from another <matpos>
I have really tried with many options without help
Please suggest and many thaks.Hi Samer,
This is due to you haven't check the condition for matdesc = "red" & if it "red" doesn't exists map blank.
for below iteration where matpos = 20 but there is no matdesc with 'Red'.
</seg24>
<seg24>
<matpos>20</matpos>
<seg12>
<matdesc>green</matdesc>
<length>200</length>
</seg12>
<seg12>
<matdesc>black</matdesc>
<length>300</length>
</seg12>
</seg24>
Thanks,
Jyoti -
Another message mapping complex issue
Hi All.
I have to map one field on the condition of another field
the source can be like this
<Header>
<seg24>
<matpos>10</matpos>
<seg12>
<matdesc>red</matdesc>
<length>100</length>
</seg12>
<seg12>
<matdesc>green</matdesc>
<length>200</length>
</seg12>
<seg12>
<matdesc>black</matdesc>
<length>300</length>
</seg12>
</seg24>
<seg24>
<matpos>20</matpos>
<seg12>
<matdesc>red</matdesc>
<length>100</length>
</seg12>
<seg12>
<matdesc>green</matdesc>
<length>200</length>
</seg12>
<seg12>
<matdesc>black</matdesc>
<length>300</length>
</seg12>
</seg24>
<seg24>
<matpos>30</matpos>
<seg12>
<matdesc>red</matdesc>
<length>500</length>
</seg12>
<seg12>
<matdesc>green</matdesc>
<length>800</length>
</seg12>
<seg12>
<matdesc>black</matdesc>
<length>900</length>
</seg12>
</seg24>
<LineItem>
<Itempos>30</Itempos>
</LineItem>
<LineItem>
<Itempos>10</Itempos>
</LineItem>
<LineItem>
<Itempos>20</Itempos>
</LineItem>
</Header>
seg12 is a sub segment of seg 24
the target can be like this
<Target>
<field1></field1>
<field2></field2>
<targetlength></targetlength>
</Target>
I have only to map the <lenght> to <targetlength>.if the <matdesc> is red.
for this I have to compare the Itempos and matpos.
if <matdesc> is red -
if Itempos eq matpos -
<length> -
> <targetlength>.
the problem is in <material> node the <matpos> is in the right sequence (10,20,30) but in <Itempos> it in the opposite order(30,10,20).
I can not get the the comparison to return true because it is compares 1 --- 1 and comparing (10 to 30) and (20 to 10) .......... will fail and hence the field red is never mapped.
is there any way I can compare the 2 positions that at some point it will get the comparison to work.
Thanks in advanceHello,
the problem is in <material> node the <matpos> is in the right sequence (10,20,30) but in <Itempos> it in the opposite order(30,10,20).
I can not get the the comparison to return true because it is compares 1 --- 1 and comparing (10 to 30) and (20 to 10)
You can use this mapping to reorder the values in itempos
Itempos -> removeContext -> sort:ascending -> splitByValue:eachValue -> your comparison logic here
Hope this helps,
Mark -
Another Adobe Air installation issue
I've tried removing the following directories and still get an error while installing.
C:\Program Files\Common Files\Adobe AIR
C:\Users\Default\AppData\Roaming\Macromedia\Flash Player\www.macromedia.com
C:\Users\phil\AppData\Roaming\Macromedia\Flash Player\www.macromedia.com
C:\Users\phil\AppData\Local\Adobe\AIR
C:\Users\phil\AppData\Roaming\Adobe\AIR
C:\ProgramData\Adobe\AIR
Yes, I ran it as administrator but not the default admin account. Phil's account has administrative privileges.
[2011-09-20:18:00:52] Runtime Installer begin with version 2.7.1.19610 on Windows 7 x86
[2011-09-20:18:00:52] Commandline is: -x1 file:///C:/Users/phil/Downloads/LIFR-1.1.0.air
[2011-09-20:18:00:52] Installed runtime (1.5.0.7220) located at c:\Program Files (x86)\Common Files\Adobe AIR
[2011-09-20:18:00:52] Invoking Application Installer for combined install
[2011-09-20:18:00:52] Launching subprocess with commandline C:\Users\phil\AppData\Local\Temp\AIR30EF.tmp\Adobe AIR\Versions\1.0\Adobe AIR Application Installer -runtime C:\Users\phil\AppData\Local\Temp\AIR30EF.tmp -withRuntime -url file:///C:/Users/phil/Downloads/LIFR-1.1.0.air
[2011-09-20:18:00:52] Application Installer begin with version 2.7.1.19610 on Windows 7 x86
[2011-09-20:18:00:52] Commandline is: -runtime C:\Users\phil\AppData\Local\Temp\AIR30EF.tmp -withRuntime -url file:///C:/Users/phil/Downloads/LIFR-1.1.0.air
[2011-09-20:18:00:52] Installed runtime (1.5.0.7220) located at c:\Program Files (x86)\Common Files\Adobe AIR
[2011-09-20:18:00:53] Unpackaging file:///C:/Users/phil/Downloads/LIFR-1.1.0.air to C:\Users\phil\AppData\Local\Temp\fla41C0.tmp
[2011-09-20:18:00:55] Application signature verified
[2011-09-20:18:00:55] Unpackaging/validation complete
[2011-09-20:18:00:55] No app located for appID 'com.amz.retirementplanner' and pubID ''
[2011-09-20:18:01:10] Converting unpackaged application to a native installation package in C:\Users\phil\AppData\Local\Temp\fla841F.tmp
[2011-09-20:18:01:11] Native installation package creation succeeded
[2011-09-20:18:01:11] Launching subprocess with commandline C:\Users\phil\AppData\Local\Temp\AIR30EF.tmp\Adobe AIR\Versions\1.0\Adobe AIR Application Installer -runtime C:\Users\phil\AppData\Local\Temp\AIR30EF.tmp -silent -logToStdout -withRuntime -url -location "C:\Program Files (x86)" -desktopShortcut -programMenu file:///C:/Users/phil/Downloads/LIFR-1.1.0.air
[2011-09-20:18:01:11] Relaunching with elevation
[2011-09-20:18:01:14] Application Installer begin with version 2.7.1.19610 on Windows 7 x86
[2011-09-20:18:01:14] Commandline is: -stdio \\.\pipe\AIR_3948_0 -runtime C:\Users\phil\AppData\Local\Temp\AIR30EF.tmp -silent -logToStdout -withRuntime -url -location "C:\Program Files (x86)" -desktopShortcut -programMenu file:///C:/Users/phil/Downloads/LIFR-1.1.0.air
[2011-09-20:18:01:14] Installed runtime (1.5.0.7220) located at c:\Program Files (x86)\Common Files\Adobe AIR
[2011-09-20:18:01:15] Unpackaging file:///C:/Users/phil/Downloads/LIFR-1.1.0.air to C:\Users\phil\AppData\Local\Temp\fla98F4.tmp
[2011-09-20:18:01:17] Application signature verified
[2011-09-20:18:01:17] Unpackaging/validation complete
[2011-09-20:18:01:17] No app located for appID 'com.amz.retirementplanner' and pubID ''
[2011-09-20:18:01:17] Converting unpackaged application to a native installation package in C:\Users\phil\AppData\Local\Temp\flaA064.tmp
[2011-09-20:18:01:18] Native installation package creation succeeded
[2011-09-20:18:01:18] Starting silent combined runtime update and app install.
Updating runtime from version 1.5.0.7220 to version 2.7.1.19610.
Installing app com.amz.retirementplanner version 1.1.0 to C:\Program Files (x86) using the source file at file:///C:/Users/phil/Downloads/LIFR-1.1.0.air
[2011-09-20:18:01:19] Installing msi at C:\Users\phil\AppData\Local\Temp\AIR30EF.tmp\setup.msi with guid {FDB3B167-F4FA-461D-976F-286304A57B2A}
[2011-09-20:18:01:24] Installing msi at C:\Users\phil\AppData\Local\Temp\flaA064.tmp\setup.msi with guid {05E8C32F-06A7-1EF5-81B0-485BEAFD69AB}
[2011-09-20:18:01:28] Application Installer end with exit code 0
[2011-09-20:18:01:28] Elevated install completed
[2011-09-20:18:01:28] Launching subprocess with commandline C:\Program Files (x86)\LIFR Retirement Planner 1.1\LIFR Retirement Planner 1.1.exe
[2011-09-20:18:01:29] Application Installer end with exit code 0
[2011-09-20:18:01:29] Subprocess app installer succeeded
[2011-09-20:18:01:29] Runtime Installer end with exit code 0
[2011-09-20:18:05:59] Runtime Installer begin with version 2.7.1.19610 on Windows 7 x86
[2011-09-20:18:05:59] Commandline is:
[2011-09-20:18:05:59] No installed runtime detected
[2011-09-20:18:06:03] Relaunching with elevation
[2011-09-20:18:06:03] Launching subprocess with commandline c:\users\phil\appdata\local\temp\aire262.tmp\adobe air installer.exe -ei
[2011-09-20:18:06:07] Runtime Installer begin with version 2.7.1.19610 on Windows 7 x86
[2011-09-20:18:06:07] Commandline is: -stdio \\.\pipe\AIR_3744_0 -ei
[2011-09-20:18:06:07] No installed runtime detected
[2011-09-20:18:06:07] Starting silent runtime install. Installing runtime version 2.7.1.19610
[2011-09-20:18:06:07] Installing msi at c:\users\phil\appdata\local\temp\aire262.tmp\setup.msi with guid {FDB3B167-F4FA-461D-976F-286304A57B2A}
[2011-09-20:18:06:07] Error occurred during msi install operation; beginning rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
[2011-09-20:18:06:07] Rolling back install of c:\users\phil\appdata\local\temp\aire262.tmp\setup.msi
[2011-09-20:18:06:07] Rollback complete
[2011-09-20:18:06:07] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
[2011-09-20:18:06:07] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
[2011-09-20:18:06:07] Runtime Installer end with exit code 7
[2011-09-20:18:06:11] Runtime Installer end with exit code 7
[2011-09-20:18:06:30] Runtime Installer begin with version 2.7.1.19610 on Windows Vista x86
[2011-09-20:18:06:30] Commandline is:
[2011-09-20:18:06:30] No installed runtime detected
[2011-09-20:18:06:34] Relaunching with elevation
[2011-09-20:18:06:34] Launching subprocess with commandline c:\users\phil\appdata\local\temp\air5b97.tmp\adobe air installer.exe -ei
[2011-09-20:18:06:37] Runtime Installer begin with version 2.7.1.19610 on Windows 7 x86
[2011-09-20:18:06:37] Commandline is: -stdio \\.\pipe\AIR_1032_0 -ei
[2011-09-20:18:06:37] No installed runtime detected
[2011-09-20:18:06:37] Starting silent runtime install. Installing runtime version 2.7.1.19610
[2011-09-20:18:06:37] Installing msi at c:\users\phil\appdata\local\temp\air5b97.tmp\setup.msi with guid {FDB3B167-F4FA-461D-976F-286304A57B2A}
[2011-09-20:18:06:37] Error occurred during msi install operation; beginning rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
[2011-09-20:18:06:37] Rolling back install of c:\users\phil\appdata\local\temp\air5b97.tmp\setup.msi
[2011-09-20:18:06:37] Rollback complete
[2011-09-20:18:06:37] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
[2011-09-20:18:06:37] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
[2011-09-20:18:06:37] Runtime Installer end with exit code 7
[2011-09-20:18:06:44] Runtime Installer end with exit code 7
[2011-09-21:06:20:28] Runtime Installer begin with version 2.7.1.19610 on Windows 7 x86
[2011-09-21:06:20:28] Commandline is:
[2011-09-21:06:20:28] No installed runtime detected
[2011-09-21:06:20:32] Relaunching with elevation
[2011-09-21:06:20:32] Launching subprocess with commandline c:\users\phil\appdata\local\temp\air4ee8.tmp\adobe air installer.exe -ei
[2011-09-21:06:20:36] Runtime Installer begin with version 2.7.1.19610 on Windows 7 x86
[2011-09-21:06:20:36] Commandline is: -stdio \\.\pipe\AIR_5268_0 -ei
[2011-09-21:06:20:36] No installed runtime detected
[2011-09-21:06:20:36] Starting silent runtime install. Installing runtime version 2.7.1.19610
[2011-09-21:06:20:36] Installing msi at c:\users\phil\appdata\local\temp\air4ee8.tmp\setup.msi with guid {FDB3B167-F4FA-461D-976F-286304A57B2A}
[2011-09-21:06:20:37] Error occurred during msi install operation; beginning rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
[2011-09-21:06:20:37] Rolling back install of c:\users\phil\appdata\local\temp\air4ee8.tmp\setup.msi
[2011-09-21:06:20:37] Rollback complete
[2011-09-21:06:20:37] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
[2011-09-21:06:20:37] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
[2011-09-21:06:20:37] Runtime Installer end with exit code 7
[2011-09-21:06:20:45] Runtime Installer end with exit code 7
[2011-09-21:06:39:03] Runtime Installer begin with version 2.7.1.19610 on Windows 7 x86
[2011-09-21:06:39:03] Commandline is:
[2011-09-21:06:39:03] No installed runtime detected
[2011-09-21:06:39:23] Relaunching with elevation
[2011-09-21:06:39:23] Launching subprocess with commandline c:\users\phil\appdata\local\temp\air5445.tmp\adobe air installer.exe -ei
[2011-09-21:06:39:29] Runtime Installer begin with version 2.7.1.19610 on Windows 7 x86
[2011-09-21:06:39:29] Commandline is: -stdio \\.\pipe\AIR_7016_0 -ei
[2011-09-21:06:39:29] No installed runtime detected
[2011-09-21:06:39:29] Starting silent runtime install. Installing runtime version 2.7.1.19610
[2011-09-21:06:39:29] Installing msi at c:\users\phil\appdata\local\temp\air5445.tmp\setup.msi with guid {FDB3B167-F4FA-461D-976F-286304A57B2A}
[2011-09-21:06:39:30] Error occurred during msi install operation; beginning rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
[2011-09-21:06:39:30] Rolling back install of c:\users\phil\appdata\local\temp\air5445.tmp\setup.msi
[2011-09-21:06:39:30] Rollback complete
[2011-09-21:06:39:30] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
[2011-09-21:06:39:30] Runtime Installer end with exit code 7
[2011-09-21:06:39:40] Runtime Installer end with exit code 7
[2011-09-21:06:41:16] Runtime Installer begin with version 2.7.1.19610 on Windows Vista x86
[2011-09-21:06:41:16] Commandline is:
[2011-09-21:06:41:16] No installed runtime detected
[2011-09-21:06:41:23] Relaunching with elevation
[2011-09-21:06:41:23] Launching subprocess with commandline c:\users\phil\appdata\local\temp\air5f4d.tmp\adobe air installer.exe -ei
[2011-09-21:06:41:32] Runtime Installer begin with version 2.7.1.19610 on Windows 7 x86
[2011-09-21:06:41:32] Commandline is: -stdio \\.\pipe\AIR_5904_0 -ei
[2011-09-21:06:41:32] No installed runtime detected
[2011-09-21:06:41:32] Starting silent runtime install. Installing runtime version 2.7.1.19610
[2011-09-21:06:41:32] Installing msi at c:\users\phil\appdata\local\temp\air5f4d.tmp\setup.msi with guid {FDB3B167-F4FA-461D-976F-286304A57B2A}
[2011-09-21:06:41:32] Error occurred during msi install operation; beginning rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
[2011-09-21:06:41:32] Rolling back install of c:\users\phil\appdata\local\temp\air5f4d.tmp\setup.msi
[2011-09-21:06:41:32] Rollback complete
[2011-09-21:06:41:32] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
[2011-09-21:06:41:32] Runtime Installer end with exit code 7
[2011-09-21:06:41:41] Runtime Installer end with exit code 7
[2011-09-21:06:46:44] Runtime Installer begin with version 2.7.1.19610 on Windows Vista x86
[2011-09-21:06:46:44] Commandline is:
[2011-09-21:06:46:44] No installed runtime detected
[2011-09-21:06:46:52] Relaunching with elevation
[2011-09-21:06:46:52] Launching subprocess with commandline c:\users\phil\appdata\local\temp\air5aca.tmp\adobe air installer.exe -ei
[2011-09-21:06:46:56] Runtime Installer begin with version 2.7.1.19610 on Windows 7 x86
[2011-09-21:06:46:56] Commandline is: -stdio \\.\pipe\AIR_6308_0 -ei
[2011-09-21:06:46:56] No installed runtime detected
[2011-09-21:06:46:56] Starting silent runtime install. Installing runtime version 2.7.1.19610
[2011-09-21:06:46:56] Installing msi at c:\users\phil\appdata\local\temp\air5aca.tmp\setup.msi with guid {FDB3B167-F4FA-461D-976F-286304A57B2A}
[2011-09-21:06:46:56] Error occurred during msi install operation; beginning rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
[2011-09-21:06:46:56] Rolling back install of c:\users\phil\appdata\local\temp\air5aca.tmp\setup.msi
[2011-09-21:06:46:56] Rollback complete
[2011-09-21:06:46:56] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
[2011-09-21:06:46:56] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
[2011-09-21:06:46:58] Runtime Installer end with exit code 7
[2011-09-21:06:54:29] Runtime Installer begin with version 2.7.1.19610 on Windows Vista x86
[2011-09-21:06:54:29] Commandline is:
[2011-09-21:06:54:29] No installed runtime detected
[2011-09-21:06:54:33] Relaunching with elevation
[2011-09-21:06:54:33] Launching subprocess with commandline c:\users\phil\appdata\local\temp\air7942.tmp\adobe air installer.exe -ei
[2011-09-21:06:54:35] Runtime Installer begin with version 2.7.1.19610 on Windows 7 x86
[2011-09-21:06:54:35] Commandline is: -stdio \\.\pipe\AIR_4300_0 -ei
[2011-09-21:06:54:35] No installed runtime detected
[2011-09-21:06:54:36] Starting silent runtime install. Installing runtime version 2.7.1.19610
[2011-09-21:06:54:36] Installing msi at c:\users\phil\appdata\local\temp\air7942.tmp\setup.msi with guid {FDB3B167-F4FA-461D-976F-286304A57B2A}
[2011-09-21:06:54:36] Error occurred during msi install operation; beginning rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
[2011-09-21:06:54:36] Rolling back install of c:\users\phil\appdata\local\temp\air7942.tmp\setup.msi
[2011-09-21:06:54:36] Rollback complete
[2011-09-21:06:54:36] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
[2011-09-21:06:54:36] Runtime Installer end with exit code 7
[2011-09-21:06:54:38] Runtime Installer end with exit code 7
[2011-09-21:08:29:22] Runtime Installer begin with version 2.7.1.19610 on Windows Vista x86
[2011-09-21:08:29:22] Commandline is:
[2011-09-21:08:29:22] No installed runtime detected
[2011-09-21:08:29:25] Relaunching with elevation
[2011-09-21:08:29:25] Launching subprocess with commandline c:\users\phil\appdata\local\temp\air556f.tmp\adobe air installer.exe -ei
[2011-09-21:08:29:29] Runtime Installer begin with version 2.7.1.19610 on Windows 7 x86
[2011-09-21:08:29:29] Commandline is: -stdio \\.\pipe\AIR_7108_0 -ei
[2011-09-21:08:29:29] No installed runtime detected
[2011-09-21:08:29:29] Starting silent runtime install. Installing runtime version 2.7.1.19610
[2011-09-21:08:29:29] Installing msi at c:\users\phil\appdata\local\temp\air556f.tmp\setup.msi with guid {FDB3B167-F4FA-461D-976F-286304A57B2A}
[2011-09-21:08:29:29] Error occurred during msi install operation; beginning rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
[2011-09-21:08:29:29] Rolling back install of c:\users\phil\appdata\local\temp\air556f.tmp\setup.msi
[2011-09-21:08:29:29] Rollback complete
[2011-09-21:08:29:29] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
[2011-09-21:08:29:29] Runtime Installer end with exit code 7
[2011-09-21:08:34:00] Runtime Installer end with exit code 7
[2011-09-21:08:36:08] Runtime Installer begin with version 2.7.1.19610 on Windows 7 x86
[2011-09-21:08:36:08] Commandline is:
[2011-09-21:08:36:08] No installed runtime detected
[2011-09-21:08:36:11] Relaunching with elevation
[2011-09-21:08:36:11] Launching subprocess with commandline c:\users\phil\appdata\local\temp\air7bf3.tmp\adobe air installer.exe -ei
[2011-09-21:08:36:13] Runtime Installer begin with version 2.7.1.19610 on Windows 7 x86
[2011-09-21:08:36:13] Commandline is: -stdio \\.\pipe\AIR_6760_0 -ei
[2011-09-21:08:36:13] No installed runtime detected
[2011-09-21:08:36:13] Starting silent runtime install. Installing runtime version 2.7.1.19610
[2011-09-21:08:36:13] Installing msi at c:\users\phil\appdata\local\temp\air7bf3.tmp\setup.msi with guid {FDB3B167-F4FA-461D-976F-286304A57B2A}
[2011-09-21:08:36:13] Error occurred during msi install operation; beginning rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
[2011-09-21:08:36:13] Rolling back install of c:\users\phil\appdata\local\temp\air7bf3.tmp\setup.msi
[2011-09-21:08:36:13] Rollback complete
[2011-09-21:08:36:13] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
[2011-09-21:08:36:13] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
[2011-09-21:08:36:13] Runtime Installer end with exit code 7
[2011-09-21:08:36:15] Runtime Installer end with exit code 7
[2011-09-21:08:36:45] Runtime Installer begin with version 2.7.1.19610 on Windows 7 x86
[2011-09-21:08:36:45] Commandline is:
[2011-09-21:08:36:45] No installed runtime detected
[2011-09-21:08:36:49] Relaunching with elevation
[2011-09-21:08:36:49] Launching subprocess with commandline c:\users\phil\appdata\local\temp\air13de.tmp\adobe air installer.exe -ei
[2011-09-21:08:36:52] Runtime Installer begin with version 2.7.1.19610 on Windows 7 x86
[2011-09-21:08:36:52] Commandline is: -stdio \\.\pipe\AIR_4472_0 -ei
[2011-09-21:08:36:52] No installed runtime detected
[2011-09-21:08:36:52] Starting silent runtime install. Installing runtime version 2.7.1.19610
[2011-09-21:08:36:52] Installing msi at c:\users\phil\appdata\local\temp\air13de.tmp\setup.msi with guid {FDB3B167-F4FA-461D-976F-286304A57B2A}
[2011-09-21:08:36:52] Error occurred during msi install operation; beginning rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
[2011-09-21:08:36:52] Rolling back install of c:\users\phil\appdata\local\temp\air13de.tmp\setup.msi
[2011-09-21:08:36:52] Rollback complete
[2011-09-21:08:36:52] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
[2011-09-21:08:36:52] Runtime Installer end with exit code 7
[2011-09-21:08:36:52] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
[2011-09-21:08:37:03] Runtime Installer end with exit code 7
[2011-09-21:08:37:53] Runtime Installer begin with version 2.7.1.19610 on Windows Vista x86
[2011-09-21:08:37:53] Commandline is:
[2011-09-21:08:37:53] No installed runtime detected
[2011-09-21:08:37:54] Runtime Installer begin with version 2.7.1.19610 on Windows Vista x86
[2011-09-21:08:37:54] Commandline is:
[2011-09-21:08:37:54] No installed runtime detected
[2011-09-21:08:37:55] Runtime Installer begin with version 2.7.1.19610 on Windows Vista x86
[2011-09-21:08:37:55] Commandline is:
[2011-09-21:08:37:55] No installed runtime detected
[2011-09-21:08:38:01] Relaunching with elevation
[2011-09-21:08:38:01] Launching subprocess with commandline c:\users\phil\appdata\local\temp\air18cd.tmp\adobe air installer.exe -ei
[2011-09-21:08:38:11] Runtime Installer begin with version 2.7.1.19610 on Windows 7 x86
[2011-09-21:08:38:11] Commandline is: -stdio \\.\pipe\AIR_3020_0 -ei
[2011-09-21:08:38:11] No installed runtime detected
[2011-09-21:08:38:11] Starting silent runtime install. Installing runtime version 2.7.1.19610
[2011-09-21:08:38:11] Installing msi at c:\users\phil\appdata\local\temp\air18cd.tmp\setup.msi with guid {FDB3B167-F4FA-461D-976F-286304A57B2A}
[2011-09-21:08:38:11] Error occurred during msi install operation; beginning rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
[2011-09-21:08:38:11] Rolling back install of c:\users\phil\appdata\local\temp\air18cd.tmp\setup.msi
[2011-09-21:08:38:11] Rollback complete
[2011-09-21:08:38:11] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
[2011-09-21:08:38:11] Runtime Installer end with exit code 7
[2011-09-21:08:38:13] Runtime Installer end with exit code 7
[2011-09-21:08:38:20] Relaunching with elevation
[2011-09-21:08:38:20] Launching subprocess with commandline c:\users\phil\appdata\local\temp\air2903.tmp\adobe air installer.exe -ei
[2011-09-21:08:38:22] Runtime Installer begin with version 2.7.1.19610 on Windows 7 x86
[2011-09-21:08:38:22] Commandline is: -stdio \\.\pipe\AIR_6784_0 -ei
[2011-09-21:08:38:22] No installed runtime detected
[2011-09-21:08:38:22] Starting silent runtime install. Installing runtime version 2.7.1.19610
[2011-09-21:08:38:22] Installing msi at c:\users\phil\appdata\local\temp\air2903.tmp\setup.msi with guid {FDB3B167-F4FA-461D-976F-286304A57B2A}
[2011-09-21:08:38:22] Error occurred during msi install operation; beginning rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
[2011-09-21:08:38:22] Rolling back install of c:\users\phil\appdata\local\temp\air2903.tmp\setup.msi
[2011-09-21:08:38:22] Rollback complete
[2011-09-21:08:38:22] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
[2011-09-21:08:38:22] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
[2011-09-21:08:38:22] Runtime Installer end with exit code 7
[2011-09-21:08:38:23] Runtime Installer end with exit code 7
[2011-09-21:08:38:25] Relaunching with elevation
[2011-09-21:08:38:25] Launching subprocess with commandline c:\users\phil\appdata\local\temp\air1b7c.tmp\adobe air installer.exe -ei
[2011-09-21:08:38:27] Runtime Installer begin with version 2.7.1.19610 on Windows 7 x86
[2011-09-21:08:38:27] Commandline is: -stdio \\.\pipe\AIR_4472_0 -ei
[2011-09-21:08:38:27] No installed runtime detected
[2011-09-21:08:38:27] Starting silent runtime install. Installing runtime version 2.7.1.19610
[2011-09-21:08:38:27] Installing msi at c:\users\phil\appdata\local\temp\air1b7c.tmp\setup.msi with guid {FDB3B167-F4FA-461D-976F-286304A57B2A}
[2011-09-21:08:38:27] Error occurred during msi install operation; beginning rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
[2011-09-21:08:38:27] Rolling back install of c:\users\phil\appdata\local\temp\air1b7c.tmp\setup.msi
[2011-09-21:08:38:27] Rollback complete
[2011-09-21:08:38:27] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
[2011-09-21:08:38:27] Runtime Installer end with exit code 7
[2011-09-21:08:38:38] Runtime Installer end with exit code 7
[2011-09-21:08:38:58] Runtime Installer begin with version 2.7.1.19610 on Windows Vista x86
[2011-09-21:08:38:58] Commandline is:
[2011-09-21:08:38:58] No installed runtime detected
[2011-09-21:08:39:02] Relaunching with elevation
[2011-09-21:08:39:02] Launching subprocess with commandline c:\users\phil\appdata\local\temp\air22cc.tmp\adobe air installer.exe -ei
[2011-09-21:08:39:04] Runtime Installer begin with version 2.7.1.19610 on Windows 7 x86
[2011-09-21:08:39:04] Commandline is: -stdio \\.\pipe\AIR_7868_0 -ei
[2011-09-21:08:39:04] No installed runtime detected
[2011-09-21:08:39:05] Starting silent runtime install. Installing runtime version 2.7.1.19610
[2011-09-21:08:39:05] Installing msi at c:\users\phil\appdata\local\temp\air22cc.tmp\setup.msi with guid {FDB3B167-F4FA-461D-976F-286304A57B2A}
[2011-09-21:08:39:05] Error occurred during msi install operation; beginning rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
[2011-09-21:08:39:05] Rolling back install of c:\users\phil\appdata\local\temp\air22cc.tmp\setup.msi
[2011-09-21:08:39:05] Rollback complete
[2011-09-21:08:39:05] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
[2011-09-21:08:39:05] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
[2011-09-21:08:39:05] Runtime Installer end with exit code 7
[2011-09-21:08:39:08] Runtime Installer end with exit code 7
[2011-09-21:08:39:37] Runtime Installer begin with version 2.7.1.19610 on Windows Vista x86
[2011-09-21:08:39:37] Commandline is:
[2011-09-21:08:39:37] No installed runtime detected
[2011-09-21:08:39:43] Relaunching with elevation
[2011-09-21:08:39:43] Launching subprocess with commandline c:\users\phil\appdata\local\temp\airb885.tmp\adobe air installer.exe -ei
[2011-09-21:08:39:46] Runtime Installer begin with version 2.7.1.19610 on Windows 7 x86
[2011-09-21:08:39:46] Commandline is: -stdio \\.\pipe\AIR_6488_0 -ei
[2011-09-21:08:39:46] No installed runtime detected
[2011-09-21:08:39:46] Starting silent runtime install. Installing runtime version 2.7.1.19610
[2011-09-21:08:39:46] Installing msi at c:\users\phil\appdata\local\temp\airb885.tmp\setup.msi with guid {FDB3B167-F4FA-461D-976F-286304A57B2A}
[2011-09-21:08:39:47] Error occurred during msi install operation; beginning rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
[2011-09-21:08:39:47] Rolling back install of c:\users\phil\appdata\local\temp\airb885.tmp\setup.msi
[2011-09-21:08:39:47] Rollback complete
[2011-09-21:08:39:47] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
[2011-09-21:08:39:47] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
[2011-09-21:08:39:47] Runtime Installer end with exit code 7
[2011-09-21:08:42:54] Runtime Installer begin with version 2.7.1.19610 on Windows 7 x86
[2011-09-21:08:42:54] Commandline is:
[2011-09-21:08:42:54] No installed runtime detected
[2011-09-21:08:42:58] Relaunching with elevation
[2011-09-21:08:42:58] Launching subprocess with commandline c:\users\phil\appdata\local\temp\airba4a.tmp\adobe air installer.exe -ei
[2011-09-21:08:43:01] Runtime Installer begin with version 2.7.1.19610 on Windows 7 x86
[2011-09-21:08:43:01] Commandline is: -stdio \\.\pipe\AIR_7176_0 -ei
[2011-09-21:08:43:01] No installed runtime detected
[2011-09-21:08:43:01] Starting silent runtime install. Installing runtime version 2.7.1.19610
[2011-09-21:08:43:01] Installing msi at c:\users\phil\appdata\local\temp\airba4a.tmp\setup.msi with guid {FDB3B167-F4FA-461D-976F-286304A57B2A}
[2011-09-21:08:43:01] Error occurred during msi install operation; beginning rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
[2011-09-21:08:43:01] Rolling back install of c:\users\phil\appdata\local\temp\airba4a.tmp\setup.msi
[2011-09-21:08:43:01] Rollback complete
[2011-09-21:08:43:01] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
[2011-09-21:08:43:02] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
[2011-09-21:08:43:02] Runtime Installer end with exit code 7
[2011-09-21:08:43:03] Runtime Installer end with exit code 7
[2011-09-21:08:43:09] Runtime Installer end with exit code 7
[2011-09-21:08:48:47] Runtime Installer begin with version 2.7.1.19610 on Windows 7 x86
[2011-09-21:08:48:47] Commandline is:
[2011-09-21:08:48:47] No installed runtime detected
[2011-09-21:08:48:55] Relaunching with elevation
[2011-09-21:08:48:55] Launching subprocess with commandline c:\users\phil\appdata\local\temp\air1b9b.tmp\adobe air installer.exe -ei
[2011-09-21:08:48:55] Runtime Installer begin with version 2.7.1.19610 on Windows 7 x86
[2011-09-21:08:48:55] Commandline is: -stdio \\.\pipe\AIR_5568_0 -ei
[2011-09-21:08:48:55] No installed runtime detected
[2011-09-21:08:48:56] Starting silent runtime install. Installing runtime version 2.7.1.19610
[2011-09-21:08:48:56] Installing msi at c:\users\phil\appdata\local\temp\air1b9b.tmp\setup.msi with guid {FDB3B167-F4FA-461D-976F-286304A57B2A}
[2011-09-21:08:48:56] Error occurred during msi install operation; beginning rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
[2011-09-21:08:48:56] Rolling back install of c:\users\phil\appdata\local\temp\air1b9b.tmp\setup.msi
[2011-09-21:08:48:56] Rollback complete
[2011-09-21:08:48:56] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
[2011-09-21:08:48:56] Runtime Installer end with exit code 7
[2011-09-21:08:49:26] Runtime Installer end with exit code 7
[2011-09-21:08:56:37] Runtime Installer begin with version 2.7.1.19610 on Windows 7 x86
[2011-09-21:08:56:37] Commandline is:
[2011-09-21:08:56:37] No installed runtime detected
[2011-09-21:08:59:53] Relaunching with elevation
[2011-09-21:08:59:53] Launching subprocess with commandline c:\users\phil\appdata\local\temp\air41b1.tmp\adobe air installer.exe -ei
[2011-09-21:08:59:53] Runtime Installer begin with version 2.7.1.19610 on Windows 7 x86
[2011-09-21:08:59:53] Commandline is: -stdio \\.\pipe\AIR_5656_0 -ei
[2011-09-21:08:59:53] No installed runtime detected
[2011-09-21:08:59:53] Starting silent runtime install. Installing runtime version 2.7.1.19610
[2011-09-21:08:59:53] Installing msi at c:\users\phil\appdata\local\temp\air41b1.tmp\setup.msi with guid {FDB3B167-F4FA-461D-976F-286304A57B2A}
[2011-09-21:08:59:53] Error occurred during msi install operation; beginning rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
[2011-09-21:08:59:53] Rolling back install of c:\users\phil\appdata\local\temp\air41b1.tmp\setup.msi
[2011-09-21:08:59:53] Rollback complete
[2011-09-21:08:59:53] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
[2011-09-21:08:59:53] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
[2011-09-21:08:59:53] Runtime Installer end with exit code 7
[2011-09-21:09:07:06] Runtime Installer end with exit code 7
[2011-09-21:09:07:39] Runtime Installer begin with version 2.7.1.19610 on Windows 7 x86
[2011-09-21:09:07:39] Commandline is:
[2011-09-21:09:07:39] No installed runtime detected
[2011-09-21:09:07:44] Relaunching with elevation
[2011-09-21:09:07:44] Launching subprocess with commandline c:\users\phil\appdata\local\temp\air62c8.tmp\adobe air installer.exe -ei
[2011-09-21:09:07:44] Runtime Installer begin with version 2.7.1.19610 on Windows 7 x86
[2011-09-21:09:07:44] Commandline is: -stdio \\.\pipe\AIR_7504_0 -ei
[2011-09-21:09:07:44] No installed runtime detected
[2011-09-21:09:07:44] Starting silent runtime install. Installing runtime version 2.7.1.19610
[2011-09-21:09:07:44] Installing msi at c:\users\phil\appdata\local\temp\air62c8.tmp\setup.msi with guid {FDB3B167-F4FA-461D-976F-286304A57B2A}
[2011-09-21:09:07:44] Error occurred during msi install operation; beginning rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
[2011-09-21:09:07:44] Rolling back install of c:\users\phil\appdata\local\temp\air62c8.tmp\setup.msi
[2011-09-21:09:07:44] Rollback complete
[2011-09-21:09:07:44] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
[2011-09-21:09:07:44] Runtime Installer end with exit code 7
[2011-09-21:09:07:59] Runtime Installer end with exit code 7I'm sorry you're running into installation issues with AIR. Microsoft has just released a new utility that can help resolve installation problems. Would you mind giving this a try and let us know how it works for you? When running the Fix it, go through the uninstall process and try to remove Adobe AIR from your system. Once finished, download the latest version of AIR and install again.
Microsoft Install and Uninstall Fix It
If you still encounter problems, I created a vb script called AIR zapper that might also help. You can find it on this post: http://forums.adobe.com/message/3737276#3737276
Thanks,
Chris -
Yet another iPhone 4 camera issue - flash positioned too close to camera!
I have noticed photos taken with flash leave a bloom of white light on the left side of the photos. Seems to be the glare due to the fact the flash is positioned so close to the lens! There are no 'divider' between the 2.
Usually on other phones, the lens and flash are hollow to minimise this effect, on the iPhone 4 both are on a flat surface and 2mm away from each other which exaggerate the problem even more!
This problem seems to resemble similar issue with the N97.
Why didn't Apple put the flash away from the lens to avoid this issue?
Sample 1 without flash:
http://venomrush.eu/apple/sample1_nonflash.jpg
Sample 1 with flash:
http://venomrush.eu/apple/sample1_withflash.jpg
Sample 2 without flash:
http://venomrush.eu/apple/sample2_nonflash.jpg
Sample 2 with flash:
http://venomrush.eu/apple/sample2_withflash.jpg
Message was edited by: VenomrushI thought this was a problem when I first used my flash, but realized I had my finger too close to the flash and it was reflecting off of my finger.. Just make sure the light is not bouncing off of something in the environment that is close to the LED i.e. fingers..
-
Yet Another MBP Airport Reception issue
My situation:
MBP 2.0 CoreDuo, 10.4.8, all updates and firmware applied.
On the same table, six feet (no obstructions) from an Apple Airport Express (not running Airtunes) and with no security enabled, the MBP will go from 0-2 bars while a MacBook and another MBP, each have 3-4 bars.
I have created a new user and tested, I have deleted the System Config folder, I have deleted and recreated the network prefs, checked for other wireless AP's, changed channels, and enabled/disabled interference robustness, with no effect.
The wild fluctuations are driving me crazy and I am really hoping this isn't a send in your MBP kind of problem.I am in the same boat and I was able to circumvent this by setting the Linksys WRT54GS Router to 802.11b Only mode.
If I have it on a mixed mode or 802.11g Only mode then I get a weak and unstable signal. Setting it on 802.11b Only mode gives me full coverage around the house and excellent steady signal.
I know that I will not be getting the optimum speeds out of this setting however it beats router crashes and frequent disconnects due to weak signal.
Is there anything that I can do to get the 802.11g back with stable and strong signal? I have tried just about everything mentioned in these forums.
Do I just get another router? Is there a router out there working with a Macbook Pro Intel Core duo running on 10.4.8? AND using a Mixed mode or 802.11g Only mode? I am interested in hearing from you. -
2.1 Final - Another Minor Formatter Indentation Issue
Looks like when you're declaring functions in a package, that it indents them when it shoudln't be, and causes a shift in following lines.
Example:
CREATE OR REPLACE
PACKAGE pkg
AS
PROCEDURE p1;
PROCEDURE p2;
FUNCTION f1
RETURN NUMBER;
FUNCTION f2
RETURN NUMBER;
PROCEDURE p3;
END pkg; Should be:
CREATE OR REPLACE
PACKAGE pkg
AS
PROCEDURE p1;
PROCEDURE p2;
FUNCTION f1
RETURN NUMBER;
FUNCTION f2
RETURN NUMBER;
PROCEDURE p3;
END pkg;Hi Marwim,
Thanks for this feedback.
I have replicated the issue and logged a bug.
Bug 9231534 - FORUM:USER DEFINED REPORT FOLDER MISSING ACTIONS IN NON ENGLISH LOCALES
Regards,
Dermot
SQL Developer Team
Maybe you are looking for
-
Hi all, I have implemented basic service desk. Now i want to implement SLA for the same. Currently i have config the mailing action depending upon Status change. But now the req is to to trigger the mails depending upon timeline.Which can be done via
-
How do I update my e-mail address in I-Tunes to my @me e-mail?
I originally had my I-Tunes account under a g-mail account. I can sign in using my @me account, however, when I go to my account it still shows my g-mail address as the primary. It won't allow me to change it to my @me address. I want to change it
-
Hi I am doing multiple file to bapi scenario. three senders and one receiver in sender side 3 files we have to use correlation for two files. and we have to use alert also.how will we restrict correlation for 2 nd file. can any one send me related bl
-
Not able to read AddtionalResult.requirments
Hi, am using the followwing code voidaxApplicationMgr_UIMessageEvent(objectsender,NationalInstruments.TestStand.Interop.UI.Ax._ApplicationMgrEvents_UIMessageEventEvente) if (e.uiMsg.Event ==UIMessageCodes.UIMsg_Trace) try intframeid; SequenceContext
-
I downloaded ios7 after being asked to restore. But now my phone wont connect to the activation server and is asking to restore again but I cant because itunes does not show any of my phone information (it just shows a blank white screen with "iphone