Another forum to discuss your issues and find their answers !!!

Another SAP Forum where you could discuss about your issues and cookbooks for various SAP modules -
http://sapcookbook.com/sapcookbook.com/forum/.
There are plenty of users (many of them are very experienced) there as well to discuss your issues.
The idea is not to affect SDN ,but to increase the SAP knowledge among all its users and newcomers and to help each other. Sometimes what i have seen is that people don't have access to SDN(because of several reasons), so they don't get a chance to get involved here. You can find those experts/users at SAPCOOKBOOK forums.
Cheers,
Gyan.

Similar Messages

Resolve your issue and unlink your Skype and Micro...

resolve your issue and unlink your Skype and Microsoft fast please limit on how many times

Can you try resetting your password?
IF YOU FOUND OUR POST USEFUL THEN PLEASE GIVE "KUDOS". IF IT HELPED TO FIX YOUR ISSUE PLEASE MARK IT AS A "SOLUTION" TO HELP OTHERS. THANKS!
ALTERNATIVE SKYPE DOWNLOAD LINKS | HOW TO RECORD SKYPE VIDEO CALLS | HOW TO HANDLE SUSPICIOS CALLS AND MESSAGES
SEE MORE TIPS, TRICKS, TUTORIALS AND UPDATES in
| skypefordummies.blogspot.com |

My iMac is not staying connected to my wireless internet. Any suggestions? My provider says it's a computer issue and not their problem.

My iMac is not staying connected to the wireless internet. My provider tells me it's a computer issue and not their problems. Any suggestions?

Please test after taking each of the following steps that you haven't already tried. Stop when the problem is resolved. Back up all data before making any changes.
Step 1
Take the applicable steps in this support article. The Wireless Diagnostics program generates a large file of information about your system, which would be used by Apple Engineering in case of a support incident. Don't post the contents here.
Step 2
Disconnect all USB 3 devices. If you don't know which are USB 3, disconnect all USB devices except keyboard and mouse.
Step 3
If you're not using a wireless keyboard or trackpad, disable Bluetooth by selecting Turn Bluetooth Off from the menu with the Bluetooth icon. If you don't have that menu, open the Bluetooth preference pane in System Preferences and check the box marked Show Bluetooth in menu bar. Test. If you find that Wi-Fi works better with Bluetooth disabled, you should use the 5 GHz Wi-Fi band. Your router may not support it; in that case, you need a new router.
Step 4
Open the Network pane in System Preferences and make a note of your settings in the Wi-Fi service. It may be helpful to take screenshots of the various tabs in the preference pane. If the preference pane is locked, unlock it by clicking the padlock icon and entering your administrator password. Delete Wi-Fi from the service list on the left by selecting it and clicking the minus-sign button at the bottom. Then recreate the service by clicking the plus-sign button and following the prompts.
Step 5
Reset the System Management Controller.
Step 6
Reset the PRAM.
Step 7
Launch the Keychain Access application. Search for and delete all AirPort network password items that refer to the network. Make a note of the password first.
Step 8
Make a "Genius" appointment at an Apple Store, or go to another authorized service center.

HT201304 What happens if you are disputing an in-app purchase with a vendor that is in CHina and is not understanding your issue and refuses to add the disputed purchase or refund the purchase?

I made an in app purchase and the game (Happy Farm) crashed but I completed the purchase on my iPad's Home screen because the Confirm purchase window popped up before I could relaunch the game. When I launched the game the purchase (which was Gems) was not showing so I took a screen shot of the game window showing 211 diamonds, which was the amount I started with, (the purchase was for 258 gems so my total should be 499). I then took a screenshot of myhome screen showing the time of day. I went back to the game repurchased the same amount, the app did not crash this time and I was credited with correct about of gems 211 +258 = 499... Took a snapshot of that screen. went back to my home screen and took a screen shot to show the time again. Well after sending Happy Farm all of this evidence, they responded that they gave me all the gems and I just used them all. I don't believe that they understand that my app crashed and during the 1st transaction and I clicked the Buy button (in the Confirm purchase window) on my Home screen not in the App, got charged but did NOT recieve the gems when I relaunched the app. I have more proof than most people and they are still calling me a liar... I need intervention from iTunes App store and I don't know how to get them to mediate this dispute. Do you know how I can get in touch with the App store?

https://getsupport.apple.com/Issues.action

Various T61 software issues and finding a local service provider

Hi all,
just got t61 two weeks ago, already have several problems, 1, can't open task manage, virus??2, internet connection takes 1/2 hr, 3, can't into share network, 4, no revorery CD, either didn't come with it or didn't creat one at begining. 5, how to format, back to original ? anyone can help me out? thanks
J
Mod edited subject for clarity
Message Edited by Tim_Lenovo on 06-17-2008 02:55 PM

Hello J,
It sounds like you've got a handful of software issues alright. Those are rather difficult to diagnose over the phone, much less the internet.
I highly recommend you to take a look at our Welcome and FAQ board, where a lot of frequently asked questions & answers are compiled for easy rereference. If you look at the "Frequenty Asked Questions" thread which is locked at the top of that board, you will find a lot of good information including how to create your recovery CD's. I would recommend you do that first thing and go from there.
You also seemed indicated wanting to find a local service location. You can find this information at http://lenovo.com/support and click "Find a service provider" under "Related Links" on the left side of the page.
Take a look at these resources and let us know where you stand. Welcome to the community and we hope to see you around the boards!
Tim Supples
Lenovo Social Media
Got a question? Don't PM me, post it on the forum!
Lenovo Blogs
X60 Tablet SXGA+ primary, Z61p fully loaded workhorse

ANOTHER Lenovo Y50 case defect issue and terrible customer service

I don't normally do forums but have been so infuriated by Lenovo customer service I felt obliged to sign up and share my experience.
I bought a Lenovo Y50-70 in November 2014. Within one month I noticed a small plastic part near the hinge was missing (i.e. I noticed the other side was intact and how it should look). I sent this to Lenovo for repair and received a call 5 mins ago to say this won't be repaired under warranty and that I will have to pay for it. This is absolutely outrageous and from the number of posts on this very forum it appears this is a common defect with this particular case. I asked the customer service rep if there was anything he could do and all i received was a very short blunt manuscript response, exhibiting no intention to help. I am not prepared to pay for shoddy design/workmanship and so my only option offered was to receive the laptop back unrepaired.
This is absolutely incredible that a company as big as Lenovo can treat their customers in such a fashion. Unless an administrator on this forum wishes to investigate this matter (as it's currently still with Lenovo repair centre) I certainly won't make the mistake of buying or recommending a Lenovo again.

So Lenovo/Medio have had my laptop for 20 days now. 2 weeks ago I was told they wouldn't repair it under warranty and would return it unrepaired. Still nothing. I called customer service yday who promised to investigate and get in touch. Nothing. I called again today, same response i.e. would investigate. It seems there is a huge communication problem between Lenovo and their Medion repair centre.
I am now looking into a legal resolution as surely under the sale of goods act it is illegal to retain an item for so long despite no repair actually taking place. You would also think Lenovo would have the decency to offer to repair the small damage (which I was quoted £80 for) as compensation for delay. But alas no, what Lenovo know about customer service is less than 0.
The fact a representative hasn't even bothered to respond on here is testimony to their lack of care and respect for customers.
Yours truly
Another Totally Annoyed Frustrated Lenovo Customer

HT1212 My iPad is disabled because of too many password incorrect answers. I tryed connecting to iTunes but it still said Enter Password On iPad, and it said only Try Again, Cancel and Find an answer to this problem, or something simular to that. What do

My ipad is disabled because of too many itemps and I tryed connecting to iTunes but it said nothing on the Apple Support page said it would. What do I do???

The answer is in the article. Finish reading the second part:
If you see one of following alerts, you need to erase the device:
"iTunes could not connect to the [device] because it is locked with a passcode. You must enter your passcode on the [device] before it can be used with iTunes."
"You haven't chosen to have [device] trust this computer"
If you have Find My iPhone enabled, you can use Remote Wipe to erase the contents of your device. If you have been using iCloud to back up, you may be able to restore the most recent backup to reset the passcode after the device has been erased.
Alternatively, place the device in recovery mode and restore it to erase the device:
Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to shut down.
While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
Continue holding the Home button until you see the Connect to iTunes screen.
iTunes will alert you that it has detected a device in recovery mode. Click OK, and then restore the device.

TS4036 I bought about 6 paid songs and and then I restored my iPad because I forgot my restriction code, then I backed it up with iCloud and nothing happened. Please reply and find an answer to this problem because I do not want to buy it again

Please help me get my paid songs back. (I restored my iPad and backed up with iCloud and nothing happened. After that I looked at my music and nothing was there, I had six songs)

iTunes, iTunes Store, far right side, look for Purchased.
Your music is there

Some confusing issues and their solution while working with InCopy stories.

Hi All, Last few months I have been working on InDesign/InCopy workFlow.I faced lot many problems and able to find solutions for some of them.I am putting down some of the problems I haved faced and the approaches I followed to get the solutions. So here I go... First I will put the issues I faced and then their common solution. Issue 1)A text frame exported as a InCopy file. InterfacePtr<IDataLinkReference> dataLinkReference(frameUIDRef, UseDefaultIID()); if(dataLinkReference == nil) break; UID linkUID = dataLinkReference->GetUID(); If(linkUID == kInvlaidID) Break; The linkUID is always equal to kInvalidUID. Issue 2)A graphics frame with image placed inside it and exported as an InCopy file. In this case the linkUID will have a valid UID. So the code ahead is UIDRef linkRef(frameUIDRef.GetDataBase(), linkUID); InterfacePtr<IDataLink> dataLink(linkRef, UseDefaultIID()); if(dataLink != nil) { PMString linkedFilePath = *(dataLink->GetFullName()); } so here the linkedFilePath will be the file path of the linked incopy file and not of that image file. Issue 3)A graphics frame with image placed inside it but without any associated InCopy file. The linkedFilePath is that of filePath of an image. The solution I found was.. The reason for this confusing behaviour is, InCopy frame has one more UIDRef associated with the InCopy story. So to get the incopy related UIDRef we have to use the following code. UIDRef incopyStoryUIDRef = Utils<IInCopyWorkFlowUtils>()->GetContainingInCopyStory(itemUIDRef); The problem with above api is in case of the graphic frame the itemUIDRef should be the UIDRef of the frame and in case of text frame the itemUIDRef should be the UIDRef of the text story i.e the text model. To get the proper UIDRef use following code //code start UIDRef storyUIDRef(frameUIDRef.GetDataBase()); InterfacePtr<IPMUnknown> unknown(frameUIDRef,IID_IUNKNOWN); if(unknown == nil) { break; } UID textFrameUID = Utils<IFrameUtils>()->GetTextFrameUID(unknown); if(textFrameUID != kInvalidUID) { isTextFrame = kTrue; UIDRef textFrameUIDRef(frameUIDRef.GetDataBase(),textFrameUID); InterfacePtr<ITextFrame> textFrame(textFrameUIDRef,UseDefaultIID()); if(textFrame == nil) { break; } ITextModel * txtMdl = textFrame->QueryTextModel(); if(txtMdl == nil) { break; } storyUIDRef = GetUIDRef(txtMdl); result = Utils<IInCopyBridgeUtils>()->IsInCopyStory(storyUIDRef); } else { isTextFrame = kFalse; result = Utils<IInCopyWorkFlowUtils>()->IsInCopyStory(frameUIDRef); storyUIDRef = frameUIDRef; } //code end. Then use UIDRef incopyStoryUIDRef = Utils<IInCopyWorkFlowUtils>()->GetContainingInCopyStory(storyUIDRef ); Once you have the proper incopyStoryUIDRef, the following code works uniformely and you will always get the incopy file irrespective of the type of frame. IDataLink * dLink = Utils<IInCopyBridgeUtils>()->QueryDataLink(incopyStoryUIDRef); if(dLink == nil) { break; } so dLink->GetFullName() will always give you the incopy file path associated with the frame. Hope this helps somebody working on InCopy stories. But I still could not find the way to find the image file path associated with the graphic incopy story.(refer issue 2 above.).Using above approach I always get the file path of associated incopy file. I will keep this thread updated as and when I encounter with some more issues and find their solutions. Thanks and Regards, Yopangjo.

I cannot explain why your iMac worked ok. I too have seen situations where "lower cost" WiFi routers like Belkin and LInksys have "sort of" worked but had problems.
Back in 2004 after buying a fairly large house I purchased an off-brand WiFi gateway that featured high power output so I could mount it centrally in the house and be able to use WiFi everywhere. Even though this thing was rated well and had the high-power everyone said would help it gave me continuous problems.
One day a buddy gave me an Apple Airport (the one that looks like a apple power adapter). I plugged it in where I had the high power unit in place and suddenly I had amazing WiFi speed and coverage EVERYWHERE. I could not believe it! That day I ordered an Airport Extreme and it has been fantastic.
I then recommended this solution to a friend of mine that had an Apple MacBook and he had nothing but trouble and went back to his linksys. So it is a mixed bag.
Currently I have three WiFi devices: A TimeCapsule downstairs, an Airport Extreme upstairs and a LInkSys in a utility closet. The LinkSys is needed because my son's GF's Windows computer will not connect to anything else.
Anyway glad you figured something out.

Another CRM Forum where you could discuss about your issues !!!!!

Another SAP Forum where you could discuss about your issues and cookbooks for various SAP modules -
http://sapcookbook.com/sapcookbook.com/forum/.
There are plenty of users (many of them are very experienced) there as well to discuss your issues.
The idea is not to affect SDN ,but to increase the SAP knowledge among all its users and newcomers and to help each other. Sometimes what i have seen is that people don't have access to SDN(because of several reasons), so they don't get a chance to get involved here. You can find those experts/users at SAPCOOKBOOK forums.
Cheers,
Gyan.
Edited by: Gyan Prakash on Mar 5, 2008 2:12 PM

Hello Gyan,
can you please explain us why people don't have access to SDN? It is an open site where everyone can register.
Regards
Gregor

Another SAP forum where you could discuss about your issues !!!

Another CRM Forum where you could discuss about your issues and cookbooks for various SAP modules -
http://sapcookbook.com/sapcookbook.com/forum/.
There are plenty of users (many of them are very experienced) there as well to discuss your issues.
The idea is not to affect SDN ,but to increase the SAP knowledge among all its users and newcomers and to help each other. Sometimes what i have seen is that people don't have access to SDN(because of several reasons), so they don't get a chance to get involved here. You can find those experts/users at SAPCOOKBOOK forums.
Cheers,
Gyan.

Hello Gyan,
can you please explain us why people don't have access to SDN? It is an open site where everyone can register.
Regards
Gregor

N8/C7 PURPLE SCREEN ISSUE AND HOW TO SPOT IF YOU H...

MODS THIS IS NOT A POLL OR IN ANYWAY SHAPE OR FORM A VOTING THREAD IT IS A THREAD TO WARN USERS ABOUT THE PURPLE SCREEN ISSUE AND HOW TO SPOT IT IN THEIR PHONES CLEAR AS DAY , I HAVE BEEN INFORMED FROM THE DIRECTOR OF COMUNICATIONS AT NOKIA VIA TWITTER THAT THIS THREAD IS OK AND THE TEST IMAGE IS FINE TO LOAD UP
The following has been added by vandelay (Nokia administrator) :
Please note that there is normally a slight variation in the purple color level in each display
unit. This is related to the display manufacturer's optical tuning process. However, some Nokia C7 and Nokia N8 users seem to be experiencing a
slightly higher level of purple color tint on their device screens.
Nokia Care's technical experts told me that the easiest way to spot this problem is to just look at the black idle screen of the device - if there is a clear purple color tint on the idle screen, you should have the device inspected at a Nokia Care point. They will repair the device the device under warranty if there is a clear defect in the device.
So seeing some purple on the test image does not necessarily mean that your screen is faulty, but we hope that it helps some people to decide whether they should visit a Nokia Care point.
(end of vandelay's addition)
as you may or may not have read many n8s and c7s have a purple tint issue
this can easily be spoted by saving the picture below to your pc , transfering it to your n8/c7 , then viewing the image in your gallery
if the image shows purple squares in some areas then iam afraid you have one of the screens that is showing defects in gradiation of colurs and the greyscale
there are also many n8s out in the wild that dont have this problem , i have 3 n8s , my gfriend has one , hers is perfect and shows the test image with no purple tint at all my three n8s all have purple tint and some display it worse then others
the test image can be viewed on any brightness and it should display just as it does on your monitor screen ,my gfriends n8 displays the image perfect under all brightness levels yet my three n8s show the purple tint heavily on low brightness and not as much on full brightness
the test image can also be viewed via tv out and hdmi out and again if you have a defect screen you will see the image perfect on your tv yet on your n8 screen you will have purple tints
here is the test image for you to load to your device and view via the gallery
as stated above if you have one of the screens with defects in colour gradiation you will see some of the squares as purple
this shouldnt be happending as there n8s out there that display the test image perfectly
from all my research on this in the last month and my time studying ICT systems support in which i have a diploma , it seems clear to me that nokia have used at least two screens in the build of the n8
many phones bought between october launch and december dont have the problem yet there are still some that do but not as many as now , phones bought from the end of december up untill current date seem to have the issue moreand its now nearly impossible to find one without the purple tint issue
this leads me to believe that from the start nokia were using at least two screen in the n8 , then one started to run out around december and by the end of december a huge majority of n8/c7 handsets have the troubles, if not all of them shipped after december
infact ive been to every phone shop in lakeside , chelmsford , colchester which included : carphone warehouse , o2 , vodafone , orange , three , phones4u , tmobile all n8/c7 handsets i asked to look at had the problem not one n8 i looked at didnt have the issue
i have been in contact with nokia care escalation team , all they did is send me very badly refurbed handsets back for my brand new n8s , which across all three handsets had the following faults
#hdmi covers scratched and worn
#no imei number under the hdmi cover on one of them
#torx screws on battery cover very worn
#plastic top caps not fitted right
#one had a huge gap between the silver screen surround and the main chasis of n8
#they all still had purple tint issue
so nokia sent me three refurbed handsets for my brand new n8s , i obvously complained as they were so new i could have taken them back to the shops with the reciept but now nokia had changed the imei numbers my reciept was useless , i said i should be sent three brand new n8s , they again sent me badly refurbed handsets just as bad as the 1st lot and again all three of them had purple screen issues
i complained again and this time supervsior took over the case and agreed that 3 new n8s should be sent to me as mine was so new , she got them sent out and this time they were new but they still have the purple screen issue
thats a toatal 12 n8s direct from nokia and all of them have had the issue so i cant recomend going to a nokia care point or nokia care uk as the refurbs i was sent was a complete joke and looked like they were just used handsets that had been through a rough time
through this month of me talking to nokia and sending emails and getting these phones swapped back to a condition of the phones that i sent them , they have said they are investigating it and taking it seriously however after some of their actions towards users (myself included) on these forums it doesnt seem like they are taking it very serious at all , they have known about it for a month now and we still have not had an offical response from nokia themselves
if you would like to read more infomation on this problem and to see how wide spread it is then please check the following links
http://www.nokiausers.net/forum/nokia-n8/39462-i-think-nokia-using-two-different-types-screen-n8-may...
http://www.nokiausers.net/forum/nokia-n8/39532-n8-purple-screen-test-please-take-part-if-you-have-n8...
http://www.allaboutsymbian.com/news/item/12604_Defective_screens_found_in_som.php
http://forum.dailymobile.se/index.php?topic=39665.0
http://www.nokiadna.com/2011/02/nokia-n8-nokia-c7-oled-screen-issues-plauge-nokia-users/
http://n8geeks.com/nokia-n8-amoled-display-issue/
there are many more threads about this issue across the net and if you google n8 screen problems or n8 purple screen problems you will come acroos many many pages of unhappy users from all across the globe
i just hope nokia sort this out soon
ho do you users with the problem feel about this issue and how do you think nokia should resolve it
id be happy for a screen swap at a nsc or via warranty postal repair as long as it could be done quickly and the user wasnt without their phone for too long after all this is nokias mistake and not the users that bought the phone so all fixes should be at minimal disturbance to them
heres hoping when you test the image your not as unlucky as me and many other n8 owners from across the globe , its a brilliant phone but this screen issue lets it down alot especially during watching films and stuff

sorry to hear you guys are having troubles too , its a shame sucha great device as the nokia n8 has had an issue like this arise , it is effecting alot of n8/c7 handsets and is quite a widespread issue across the globe
it would be great to hear from as many users as possible about this and what they think about it as a user of the c7/n8
jimmyireland about your post mate
yes it was written by me and yes it ws deleted not once but 3or4 times actually
the mods said it was because i had set up a poll and voting system , so i read through forum rules and posted it again with what fitted their guidelines and even put in big caps that it was not a poll but a thread to help users identify a problem and discuss it which is what the forum is for , it was deleted again , i then posted it again with just the test image and how to spot the problem and again put big caps that the post fitted their guidelines and was just to help users , it was again deleted and i was banned by mods for 2 days saying that i had broke forum rules and posted a poll and that the test image wasnt a proper test image
i then asked other users to post the image but when they tryed nokias spam filter kicked in with a message saying that their post contained spam and that they should write it again and try posting again
to be honest it really looked like they were trying to cover up the issue , fair enough my 1st post could be considered a very very rough poll but the posts i made afterwards were edited to fit nokias guidelines and they still removed them ad banned me and then other users posts were marked as spam
so i tweeted alot of people and even nokia have said that as long as the post doesnt contain polls/votes then it will be fine to postand that mods shouldnt delete it , which was excellent news and hopefull this thread will stay and users can load the image and test their screens and then discuss the issue here so nokia can see users discussion in one thread , it will alo help awareness of the issue
hence this post that isnt a poll but a thread to help users identify wether their n8/c7 has a screen with a defect in the gradiation of colours
as stated in original post not all n8s have this problem my gfriends doesnt and it displays the test image perfectly on all brightness settings , yet my n8s show the image as very purple on low brightness and the brighter the screen goes the less the purple is shown , it is still there just not as visible as it is in the lower brightness settings
as i also mentioned many n8s between october and mid december are fine although some still have the problem , yet from mid december till current date the amount of n8s with purple issue is much much higher and it now seems very very rare that you will get a brand new n8 from the shops without this screen issue which leads me to believe that from launch nokia have used at least two screens in the builds of the n8 , some great screens and then the ones with dodgy purple tint , from the threads across the web it seems like the good screens nokia were using either run out or they have failed to source the same screen or the manufactuer of the screen has changed something
iam not a nokia hater and iam not here to cause trouble or loose nokia sales etc
i love nokia have used them for years and used symbian since the 6680 , iam always helping users across the web with their nokia problems and am an avid user on nokia users please check my profile and feel free to check my posts and how many times ive been thanked for being helpfull
http://www.nokiausers.net/forum/members/buxz777.html
as you can see i love nokia and spend alot of time using their devices , speaking highly of them and helping their users with problems, i also love good customer services and customer relations
i understand that big companys have build issues iam a gadget lover and trained in ict supprt iam not silly and understand that these things happend and building these phones with such complicated electronics and some could end up with issues , it could happend to anyone , sony , apple , samsung , blackberry , lg etc etc
however its how the companys react to these issues and relate to their customers that have spent 100s of pounds on their devices that is important , issues do arise , its how the company looks after its customers thats important
i think alot of users think the same , they dont expect nokia to click their fingers and go heres a fix but they do expect nokia to investigate the issue and they do expect nokia to relate to its customers and not ignore them or the issue which is what it looks like when posts are deleted and users are banned for posting informative posts that help users identify a problem
things like sending users really bad refurbs for brand new n8s also dont help users confidence in nokia statement of going to nokia care about the problem as all i got was second hand looking n8s that still have the problem they were sent off with and the originals were in much better condition
like i say iam not here to cause trouble and i love nokia the n8 is the best phone ive ever had and its almost my dream device and everything ive wanted on a device for years its the ultimate convergance device and agadget lovers dream , however when you see your gfriends and some of your mates n8 screens display the test image perfect then your n8 display it with a very purple hue it does dissapoint you and you do hope that nokia will take notice and fix the issue with the least amunt of hassle to the users
cheers jimmy and sorry about the long post just wanted to clear some things up
now lets get back to discussing the issue and what other users think about it
have a great evening

EliteBook 8570p Fingerprint Sensor Issue and Windows 8 and 8.1 Built-In Biometric Framework

Hello there,
i'm currently testing the Preview Build of Windows 8.1 on my HP EliteBook 8570p and have a small Problem using the Fingerprint... but back to start...
In Windows 8 there wheren't any microsoft builtin biometric framework, to get the fingerprint there you have to install the hp security protect manager, and the validity Fingerprint Driver from here:
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=de&cc=de&prodTypeId=32...
the actual version that the site above state is this: 4.4.228.0 (31 Okt 2012)
the filename of the fingerprint driver should be this: sp59624.exe
exactly this is what i download, but then upon extracting and "older?" SP-Number appears? -> SP58152 ????
Driver should have Win8 support, but on installing it it just says it supports Win7 max... another hint that the driver packet is wrong packed...
this is the first thing what is very strange, even, the driver won't install automatically... just manuall, this is also a non WBF (Windows Biometric Framework) driver, so ne built-in fingerprint support of win 8.1 does not work.. indeed with the hp security manager... but when using the fingerprint login there i see just ugly Windows Vista branded Loginmasks... not a real choice..
after a bit of google seach i then found a new version of the validty fingerprint driver, but this is not listet in the 8570p Model download page... just found it with the help of google..
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?cc=de&lc=de&dlc=de&softwareitem=ob-109892-1
this one have a newer version: 4.4.234.0 (2012-09-07)
interessting thing about this... newer version, but older release date... ?!
and it is a WBF driver, voila, i thought...
installing the driver via the device manager (VFS451) and Windows 8.1 is able to scan fingers for login or credentials requests... works quite well... until first reboot... sadly after the first reboot, windows just continously means that a finger is getting swyped acrous the fingerprint reader, but it isn't...
after deinstalling the device, and reinstalling it (and driver) the fingerprint reader works again still the next reboot...
any help is appreciated and HP PLEASE do something about all the issues with the fingerprint readers even in Windows 8 (and/or correct the download)

Hello DaStivi,
Your EliteBook is a Business model. Your issue would be best answered on the HP Enterprise Business Community Forum
Good luck!
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

I have downloaded AI Trial but am getting a Configuration Error as follows 'A problem has occured with the licensing of this product. Restart your computer and re-launch the product. If this problem still occurs after restarting, contact Customer Support

I have downloaded AI Trial but on launching I am getting a Configuration Error which reads '
A problem has occured with the licensing of this product. Restart your computer and re-launch the product.
If this problem still occurs after restarting, contact Customer Support for further assistance, and mention the error code shown at the bottom of this screen.
Error: 213:5.
I have tried the restart suggestion, but the problem persists.
Can anyone assist.
TIm

Tim,
This may be one for this specialized forum (where you may be able find the answer from previous threads),
http://forums.adobe.com/community/download_install_setup
or for a chat,
Creative Cloud support (all Creative Cloud customer service issues, chat open between 5AM and 7PM PST/PDT on workdays)
http://helpx.adobe.com/x-productkb/global/service-ccm.html
or for Adobe phone Support,
http://helpx.adobe.com/adobe-connect/adobe-connect-phone-numbers.html

40RV525U HDMI issues, and other problems

I'm using the 40RV525U model, and none of the HDMI ports work consistently, if at all. It's been like this since I bought the TV, but I (unfortunately) didn't take it back because I could use component cables with the PS3...it's primary purpose. I recently bought a PS4, and there are no component cables available, and converters don't work. Surpringly, I was able to get the HDMI 1 port to work after changing the PS4's output to 720p, but it wasn't consistent. It worked great for about 3 days, no problems at all. And then last night, it started losing the handshake every 30 seconds or so. I would get the dreaded snow screen (snow looks great in HD, btw) and black screen, and then it would re-connect and I'd have picture for a minute.
The fact that I was able to get it to work for 3 days without the slightest problem leads me to believe that it's a firmware issue. I'm on 1.05, the latest firmware version that I can find. Are there any further updates? The problems with this TV are numerous, but I like the picture, and I can't really afford to buy a new TV.
Thanks

If you can't solve your issue and no one in the community can help, contact support to speak with a tech support agent at (800) 631-3811.
- Peter

Another forum to discuss your issues and find their answers !!!

Similar Messages

Maybe you are looking for