API for Zebra printer language

Hi all,
Can any one tell me whether there is any API is available to convert the product code into Zebra printer language.
Details of Zebra priter languange is available in the following link
http://www.zebra.com/id/zebra/na/en/index/products/special_features/proglang/zpl.html

Hi All,
If I directly printing the uploaded ITF file from standard text, I am able to print the logo. But when copy paste the same code in SAPscript its not printing. Please can anybody explain why?
Thanks & Regards,
Priya

Similar Messages

Command to move content left/right in Smartform label for zebra printer

Issue : Command to move print content left/right in Smartform label for zebra printer.
Requirement : If you changed the printer setting top position and left position, Print should start from a specific (X,Y) position.
I am facing an issue while printing a smartfroms in different zebra printer. We had tried all
S_LZPL_SETUP_X (Where X is LH/SPD/MD/PM/FT )
But these command are not working in smartforms.
We had used ZPL II printer command like u2018LH X,Yu2019 and u2018FT,X,Yu2019 in main window as well as in subsequent windows. But that also not working.
Please advice.
dinesh.

Hi,
If you follow notes #750002 and #750772 and use a smartforms and device type LZEB2, then the you cn just adjust the position of the text in the smartform. e.g. Use tab-stops, spaces or adjust the position of the window. There is no need to use ZPL2 commands directly.
Regards,
Aidan

Logo not printing for Zebra printer

Hi All,
I have a requirement to print company logo after executing MIGO using Zebra printer. I have added the Zebra print parameters in SAPscript and uploaded the ITF file of logo to SO10 and from there copied to my SAPscript and tried printing, there is no logo displayed. I have tried using including standard text in sapcript with help of INCLUDE text statement that also is not working. Please help me to print logo using SAPscript for zebra printers.
Thanks & Regards,
Priya

Hi All,
If I directly printing the uploaded ITF file from standard text, I am able to print the logo. But when copy paste the same code in SAPscript its not printing. Please can anybody explain why?
Thanks & Regards,
Priya

SAPSCRIPT CODE FOR ZEBRA PRINTING OF SU

Hi friends,
can anyone send me some sapscript code done on ZEBRA PRINTING . I have to create SU label Print program and oprint layout for LT31 .
THANKS IN ADVANCE .

Hi, you need to install Label Design for mySAP otherwise you will not understand these control codes.
Also you need to read Note 179534 - Label printing with Zebra printers (SAPscript).
This is an exaple sapscript:
/E   PRINT_LABEL
=    ^XA
=    LH0,0,FS^PRC
=    FO53,54A0N,40,59FD5010 Physical Inv./Cycle CountFS
/*   BY2,38,78FT78,128^B3N,N,,Y,N
/(   BY2,38,78FT78,198^B3N,N,,Y,N
/    FFD&IT_ZINVMSEG-MATNR&^FS
=    FO420,159A0N,60,79FD&IT_ZINVMSEG-MATNR&FS
=    FT49,284A0N,38,38FD&C_DESCRIPTION&FS
/*   IF &IT_ZINVMSEG-TAGNO& NE SPACE
=    FT49,340A0N,38,38FDTag Num.: &IT_ZINVMSEG-TAGNO&FS
=    FT488,340A0N,38,38FDDate: &IT_ZINVMSEG-IDATU&FS
/*   ENDIF
=    FT49,401A0N,38,38FDBase Unit: &c_meins&FS
=    FT49,474A0N,38,38FDQty:   &IT_ZINVMSEG-ERFMG&FS
/    ^PQ1,0,1,Y
/    ^XZ

CUPS EPL2 driver for Zebra printer - label edge sensing?

Hi
Can anyone help with this?
iMac Intel Leopard 10.5.5
Zebra TLP3842 300dpi label printer with CUPS EPL2 driver
I can print to the printer OK using the CUPS EPL2 driver that comes with Leopard but the printer doesn't appear to be recognising the 'label edge' so the print isn't always centered on the label. I can't find any option within the printer settings for 'continuous', 'black line', 'reflective', etc label edge sensing. Does this driver have such options? Strange thing is I'm sure I've seen it somewhere but can't remember how to get to it.

Update your printer driver, check if the following information helps:
https://bugzilla.mozilla.org/show_bug.cgi?id=324141
You can see the KB and try the workaround here:
http://support.microsoft.com/kb/904805/en-us

SAP Script : Control Commands for printing Label (barcode) by Zebra Printer

Hello,
I would like to know the control commands in sap script for Zebra Printer. The purpose of task is to print a field in barcode format in Right Bottom of the label.
The sample code is placed below. Kindly have a look at it. The problem now i am facing is, the barcode for Customer PO is printing on the wrong place (Left Bottom, the text & barcode are overwriting). Can anyone suggest a possible way or can any one send the document for Barcode commands in SAP Script for Zebra Printer.
Sample script code:
Initialization and reset Barcode
XAMCY^XZ
Start
^XA
Barcode setup
^BY3,2.7,2.2
Set label home position
^LH
^FWN
FO385,025A0R,40,50FDPN: &VBAP-MATNR&FS
FO385,725A0R,40,50FD&VBAP-ARKTX&FS
FO385,1710A0R,40,50FDRtns: &zsntsc-contr&FS
FO345,025A0R,40,50FDService Order# &AUFK-AUFNR&FS
FO345,725A0R,40,50FDSerial# &EQUI-SERNR&FS
FO345,1710A0R,40,50FDRepair Order# &VBAP-VBELN&FS
FO245,025B3R,N,90,N,NFD&AUFK-AUFNR&FS
FO245,725B3R,N,90,N,NFD&EQUI-SERNR&FS
FO245,1710B3R,N,90,N,NFD&VBAP-VBELN&FS
FO138,1710A0R,40,35FDCustomer PO# &VBKD-BSTKD&FS
FO98,025A0R,40,50FDWrnty: &W_WARRANTY&FS
FO98,605A0R,40,50FDRoute: &W_ROUTE&FS
FO58,025A0R,40,35FDShip-to-name: &W_NAME1&FS
FO58,1325A0R,40,35FDMinor Group/Nr: &TVM5T-BEZEI&FS
FO58,1325A0R,40,35FDMinor Group/Nr: &TVM5T-BEZEI&FS
FO18,885A0R,40,35FDReported By: &QMEL-QMNAM&FS
FO18,1710B3R,N,90,N,NFD&VBKD-BSTKD&FS
^XZ
Thanks in Advance,
Ramasamy

HI
GOOD
GO THROUGH THIS
A barcode solution consists of the following:
- a barcode printer
- a barcode reader
- a mobile data collection application/program
A barcode label is a special symbology to represent human readable information such as a material number or batch number
in machine readable format.
There are different symbologies for different applications and different industries. Luckily, you need not worry to much about that as the logistics supply chain has mostly standardized on 3 of 9 and 128 barcode symbologies - which all barcode readers support and which SAP support natively in it's printing protocols.
You can print barcodes from SAP by modifying an existing output form.
Behind every output form is a print program that collects all the data and then pass it to the form. The form contains the layout as well as the font, line and paragraph formats. These forms are designed using SAPScript (a very easy but frustratingly simplistic form format language) or SmartForms that is more of a graphical form design tool.
Barcodes are nothing more than a font definition and is part of the style sheet associated with a particular SAPScript form. The most important aspect is to place a parameter in the line of the form that points to the data element that you want to represent as barcode on the form, i.e. material number. Next you need to set the font for that parameter value to one of the supported barcode symbologies.
The next part of the equation can be a bit tricky as you will need to get a printer to print that barcode font. Regular laser printers does not normally print barcode fonts, only specialized industrial printers that is specifically designed to support that protocol and that uses specialized label media and heat transfer (resin) ribbon to create the sharp image required for barcodes.
Not to fear though, there are two ways to get around this:
- You can have your IT department do some research -
most laser printers can accept a font cartridge/dimm chip (similar to computer memory), called a BarDIMM that will allow a laser printer to support the printing of barcodes.
- Secondly, you can buy software that you can upload in your SAP print Server that will convert the barcode symbology as an image that will print on a regular laser printer. I found that this option results in less sharper barcodes. This option is really if you need to convert a large quantity of printers (>10) to support barcodes.
- Thirdly, you can buy a third party software like Barcode.dll and install on your frontend PC connected to the laser printer.
Now you have a barcode printed - what next?
Well there are two options, depending on your business requirements:
- You can use an existing SAP transaction on a regular workstation and get a barcode wedge reader to hook up between the keyboard and the PC. These wedge readers comes in a wand or scanner format. There are even wireless wedge scanners available that allows you to roam a few yards from the workstation to scan a label. This approach is mostly used where you want to prevent human errors in typing in long material, batch or serial numbers in receiving or issuing of material. The problem is that it's just replacing the keyboard input and you are basically locked down in one location and have to bring all the material to that location to process.
- Another solution is to use SAPConsole transactions
or write your own ABAP Dialog programs that will fit onto a barcode enabled wireless handheld terminal and that will follow the business logic as executed on the shop floor.
These programs are highly complex exercises in industrial engineering and ergonomics because of the limited screen sizes and limited ability to accept keyboard input. The user is instructed step-by-step and only scan and push F-keys to interact with the SAP system. Scan, scan, beep, beep, enter - highly automated.
GO THROUGH THESE LINKS
http://www.sap-img.com/abap/details-information-about-sap-barcodes.htm
http://help.sap.com/saphelp_nw04/helpdata/en/68/4a0d5b74110d44b1b88d9b6aa1315b/content.htm
THANKS
MRUTYUN

BarTender for Zebra Barcode Label printing using Smartform

HI Experts,
Does anyone know how to use BarTender 7.10 software to create barcode labels for Zebra printer?
I have to include a jpg Logo into the Label using BarTender.
But when I test using the Zebra printer - the logo/picture won't print out.
Any idea?
Thank You.
Best Regards,
CW

Hi There,
I had problems with using Bartender when I tried to print a logo onto my labels, but I contacted a [labelling company |www.iidsolutions.net] who specialise in barcode label printing and the bartender software, they sorted out my problem but then after a chat with them I decided it would be easier to get them to print the labels for me as I had loads of changes and they were quite cheap. See if they can help you. :~)
Good luck.
Dave.

Printing sapscript label using zebra printer

Hi,
Can anybody please help me regarding "printing sapscript label using zebra printer"?
i hav set the following print default settings in the transaction mb90:
output device :
NO01
device type: YZZX_ZEB
but when i try to print ,i am getting error message stating that "the respective sapscript form is not active ".
i hav also attached my print program for ur easy reference.
====================================================================*
FORM open_form_slv.
*' Description:
*' Add information for the SAP spooler
*' Change the name of the standard customized form for Zebra print
*' Last Change Vers Programmer   Reason
*1
DATA: BEGIN OF print_infos.
          INCLUDE STRUCTURE itcpo.
DATA: END OF print_infos.
DATA: form_name(16) TYPE c, char1(1) TYPE c, ind_beg TYPE i.
PERFORM itcpo_fuellen.
MOVE-CORRESPONDING itcpo TO print_infos.
WRITE sy-datum USING EDIT MASK '__.__.____'
                                           TO print_infos-tdcovtitle+1.
WRITE sy-uzeit USING EDIT MASK '__:__:__'
                                          TO print_infos-tdcovtitle+12.
CONCATENATE itcpo-tddest sy-uname ' PO'(001) ekpo-ebeln ' Doc.No'(002)
                                       mseg-mblnr print_infos-tdcovtitle
                          INTO print_infos-tdcovtitle SEPARATED BY space.
form name from the table YZZM_GR_LABEL
IF NOT g_fonam IS INITIAL.
    tnapr-fonam = g_fonam.
ENDIF.
if the used printer is a Zebra label printer, then the customized
layout set name ???_???_XXX will be changed to ???_???_ZP
SELECT SINGLE * FROM tsp03d WHERE padest = nast-ldest.
IF tsp03d-patype = 'YZZX_ZEB'.
    ind_beg := 15.
    WHILE ind_beg > -1.
      char1 := tnapr-fonam+ind_beg.     " substr(tnapr-fonam,ind_beg,1)
      IF char1 = '_'.
        form_name := tnapr-fonam(ind_beg).
        CONCATENATE form_name '_ZP' INTO tnapr-fonam.
        EXIT.
      ENDIF.
      ind_beg := ind_beg - 1.
    ENDWHILE.
ENDIF.
CALL FUNCTION 'OPEN_FORM'
    EXPORTING
      device   = 'PRINTER'
      language = language
      OPTIONS = print_infos
      form     = tnapr-fonam
      dialog   = ' '.
x_open := x.
IF mseg-weanz = 0. mseg-weanz = 1. ENDIF.
IF syst-tcode <> 'MB90' AND NOT g_flag_popup IS INITIAL.
check for requirement of printing label and ask for gr-quantities (popup)
    SELECT SINGLE * FROM yzzm_gr_quantity WHERE ebeln = mseg-ebeln.
    CLEAR yzzm_gr_quantity-no_popup.
ELSE.
and ask not for gr-quantities
    IF syst-tcode = 'MB90'.
      yzzm_gr_quantity-erfmg := mseg-menge.
    ELSE.
      yzzm_gr_quantity-erfmg := mseg-menge / mseg-weanz.
    ENDIF.
    yzzm_gr_quantity-no_popup := x.
ENDIF.
determination inspection lot number
CLEAR qals-prueflos.
SELECT SINGLE * FROM qals WHERE mblnr = mseg-mblnr
                       AND zeile = mseg-zeile
                       AND mjahr = mseg-mjahr.
determination vendor batch
CLEAR mch1-licha.
SELECT SINGLE * FROM mch1 INTO mch1 WHERE matnr = mseg-matnr
                                        AND charg = mseg-charg.
ENDFORM.                    "open_form_label
=================================================================== *
FORM we01_print_slv.
*' Description:
*' print out of hazardous symbol
*' controls the Zebra printer
*' Last Change Vers Programmer   Reason
*****26.09.2007 Starts
DATA: l_objky TYPE nast-objky,"Object key
        l_vstat TYPE nast-vstat. "Processing status of message
*****26.09.2007 Starts
TABLES: mgef, t300.
FIELD-SYMBOLS: .
DATA: aux_index LIKE sy-index.
DATA: count_haz_sym, position TYPE n, zw TYPE p DECIMALS 1.
DATA: aux_value(5) TYPE c.
DATA: txt(10) TYPE c, pos(5) TYPE c.
t001w-werks = r_werks.
t001w-name1 = r_name1.
PERFORM read_address.
*2
SELECT SINGLE * FROM ekpo WHERE ebeln = mseg-ebeln
                              AND ebelp = mseg-ebelp.
CLEAR mara-stoff.
SELECT SINGLE stoff INTO mara-stoff FROM mara WHERE matnr = mseg-matnr.
IF NOT mara-stoff IS INITIAL.
    CLEAR t300.
    SELECT SINGLE * FROM t300 WHERE lgnum = mseg-lgnum.
    IF NOT sy-subrc IS INITIAL.
for plants without warehouses try to use the country code
      CASE mseg-werks.
        WHEN 'BUP'.
          t300-regkz := 'US '.
      ENDCASE.
    ENDIF.
    CLEAR mgef.
    SELECT SINGLE * FROM mgef WHERE stoff = mara-stoff
                              AND   regkz = t300-regkz.
ENDIF.
in case of more then one label, use for each a new output window
(not only for the first)
IF g_count > 1.
    CALL FUNCTION 'CONTROL_FORM'
      EXPORTING
        command = 'NEW-WINDOW'.
ENDIF.
Ausgabe Gefahrstoffsysmbole        Neustadt, V.Hilgert 14.07.98
*For output type YNL7, the hazardous warning symbol has to be printed at the bottom of the label.So label is called before that.
IF tnapr-kschl = 'YNL7'.
    CALL FUNCTION 'WRITE_FORM'
      EXPORTING
        element = 'LABEL'.
ENDIF.
count_haz_sym = 0. position = 0.
WHILE count_haz_sym = 'XN'.
For output type YNL7, the width of the standard text is small.
      IF tnapr-kschl = 'YNL7'.
        zw = position * '0.2' + '0.1'. pos = zw.
      ELSE.
        zw = position * '1.3' + '0.1'. pos = zw.
      ENDIF.
      IF tsp03d-patype = 'YZZX_ZEB'. " device type for ZEBRA label priter
        aux_value := count_haz_sym.
      ELSE.
        aux_value := pos.              " HP/Kyocera or other laser printer
      ENDIF.
      CALL FUNCTION 'TEXT_SYMBOL_SETVALUE'
        EXPORTING
          name   = '&XPOS&'
          value = aux_value
        EXCEPTIONS
          OTHERS = 1.
      CALL FUNCTION 'WRITE_FORM'
        EXPORTING
          element   =
          window    = 'MAIN'
        EXCEPTIONS
          element   = 1
          function = 2
          type      = 3
          unopened = 4
          unstarted = 5
          window    = 6
          OTHERS    = 7.
      IF sy-subrc = 0.
*Varying the position for YNL7
        IF tnapr-kschl = 'YNL7'.
          position = position + 2.
        ELSE.
          position = position + 1.
        ENDIF.
      ENDIF.
    ENDIF.
ENDWHILE.
IF NOT mseg-vfdat IS INITIAL.
    am07m-mhtxt = text-105.
ENDIF.
IF NOT am07m-mhdat IS INITIAL.
    am07m-mhztx = text-106.
ENDIF.
IF ekko-bsart = 'UB'.
    am07m-litxt = text-101.
    am07m-libzg = ekko-reswk.
ELSE.
    am07m-litxt = text-100.
    am07m-libzg = ekko-lifnr.
ENDIF.
belpos-mblnr = mkpf-mblnr.
belpos-zeile = mseg-zeile.
CONDENSE belpos NO-GAPS.
am07m-belpos = belpos.
IF t156-shkzg = h.
    am07m-hdlne = text-020.
ELSE.
    am07m-hdlne = text-010.
ENDIF.
Ausgabe der Etiketten mit den ind. Mengen
IF NOT g_flag_popup IS INITIAL.
    SELECT SINGLE * FROM yzzm_gr_quantity WHERE ebeln = mseg-ebeln
                                          AND   weanz = g_count.
ELSE.
* print the number of labels is handeled by the Zebra printer
IF tsp03d-patype = 'YZZX_ZEB'. " device type for Zebra label prts
g_lbls_tot := mseg-weanz - g_count + 1.
g_break_print := x.
ENDIF.
ENDIF.
mseg-erfmg := yzzm_gr_quantity-erfmg.*
********26.09.2007 Starts
CONCATENATE mseg-mblnr mseg-mjahr mseg-zeile INTO l_objky.
SELECT SINGLE vstat INTO l_vstat FROM nast WHERE kappl = 'ME' AND
objky = l_objky AND
kschl = 'YNL7'.
********26.09.2007 Ends
CALL FUNCTION 'TEXT_SYMBOL_SETVALUE'
EXPORTING
name = '&nummer&'
value = g_count.
IF tnapr-kschl <> 'YNL7'.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'LABEL'.
else.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
ELEMENT = 'BAR_CODE'
EXCEPTIONS
ELEMENT = 1
FUNCTION = 2
TYPE = 3
UNOPENED = 4
UNSTARTED = 5
WINDOW = 6
BAD_PAGEFORMAT_FOR_PRINT = 7
SPOOL_ERROR = 8
CODEPAGE = 9
OTHERS = 10.
IF sy-subrc <> 0. MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
     ENDIF.
ENDIF.
ENDFORM.                    "GR_label_print
*&      Form lesen
      text
     -->OBJKY      text
FORM lesen USING objky.
nast_key = objky.
CLEAR retco.
SELECT SINGLE * FROM mkpf WHERE mblnr = nast_key-mblnr
                            AND   mjahr = nast_key-mjahr.
SELECT SINGLE * FROM mseg WHERE mblnr = mkpf-mblnr
                            AND   zeile = nast_key-zeile
                            AND   mjahr = mkpf-mjahr.
IF sy-subrc NE 0.
    retco = sy-subrc.
    EXIT.
ENDIF.
PERFORM tab156_lesen.
xskkz = t156-rstyp.
PERFORM tab001w_lesen.
IF NOT mseg-evers IS INITIAL.         "Versandvorschriften lesen.
    PERFORM t027_lesen.
ENDIF.
PERFORM bestellung_lesen.
IF NOT ekpo-knttp IS INITIAL AND NOT
         ekpo-weunb IS INITIAL.
    PERFORM kontierung_lesen.           "für multikontierte Bestellungen
ENDIF.
IF NOT mseg-ematn IS INITIAL.
    PERFORM lesen_htn.
ELSE.                                                     "111277/PH
    CLEAR am07m-mfrpn.                                      "111277/PH
ENDIF.
IF mseg-matnr IS INITIAL.
    mseg-menge = mseg-bpmng.
    mseg-meins = mseg-bprme.
    PERFORM bestelltext_lesen.
    CLEAR mabdr.
ELSE.
    PERFORM material_lesen.
ENDIF.
PERFORM tab024_lesen.
PERFORM t064b_lesen.
PERFORM ladr_lesen.
ENDFORM.                    "lesen
Lesen für WE-Schein Fert.Auftrag -
FORM lesen_wf USING objky.
nast_key = objky.
CLEAR retco.
SELECT SINGLE * FROM mkpf WHERE mblnr = nast_key-mblnr
                            AND   mjahr = nast_key-mjahr.
SELECT SINGLE * FROM mseg WHERE mblnr = mkpf-mblnr
                            AND   zeile = nast_key-zeile
                            AND   mjahr = mkpf-mjahr.
IF sy-subrc NE 0.
    retco = sy-subrc.
    EXIT.
ENDIF.
PERFORM tab156_lesen.
xskkz = t156-rstyp.
PERFORM tab001w_lesen.
PERFORM auftrag_lesen.
IF NOT mseg-matnr IS INITIAL.
    PERFORM material_lesen.
ELSE.
    mseg-menge = mseg-erfmg.
    mseg-meins = mseg-erfme.
ENDIF.
PERFORM tab024d_lesen.
PERFORM t064b_lesen.
PERFORM ladr_lesen.
ENDFORM.                    "lesen_wf
Lesen für Warenausgang -
FORM lesen_wa USING objky.
nast_key = objky.
CLEAR retco.
SELECT SINGLE * FROM mkpf WHERE mblnr = nast_key-mblnr
                            AND   mjahr = nast_key-mjahr.
SELECT SINGLE * FROM mseg WHERE mblnr = mkpf-mblnr
                            AND   zeile = nast_key-zeile
                            AND   mjahr = mkpf-mjahr.
IF sy-subrc NE 0.
    retco = sy-subrc.
    EXIT.
ENDIF.
PERFORM tab156_lesen.
xskkz = t156-rstyp.
PERFORM tab001w_lesen.
IF NOT mseg-matnr IS INITIAL.
    PERFORM material_lesen.
ENDIF.
PERFORM ladr_lesen.
ENDFORM.                    "lesen_wa
Druck Vorbereiten -
FORM open_form.
PERFORM itcpo_fuellen.
CALL FUNCTION 'OPEN_FORM'
    EXPORTING
      device   = 'PRINTER'
      language = language
      OPTIONS = itcpo
      dialog   = ' '.
PERFORM lesen_t159p.
x_open = x.
ENDFORM.                    "open_form
Druck Vorbereiten Sammelscheine -
FORM open_form_sammel.
PERFORM lesen_t159p.
PERFORM itcpo_fuellen.
CALL FUNCTION 'OPEN_FORM'
    EXPORTING
      device   = 'PRINTER'
      language = language
      OPTIONS = itcpo
      form     = tnapr-fonam
      dialog   = ' '.
x_open = x.
ENDFORM.                    "open_form_sammel
Druck schließen -
FORM close_form.
CHECK NOT x_open IS INITIAL.
CALL FUNCTION 'CLOSE_FORM'.
CLEAR x_open.
ENDFORM.                    "close_form
Hilfsfelder versorgen für Sammelscheindruck -
FORM helpdata1.
   *mkpf = mkpf.
   *mseg-lgort = mseg-lgort.
   *ladr = ladr.
save_mkpf = *mkpf-usnam.
save_mblnr = *mkpf-mblnr.
save_budat = *mkpf-budat.
save_cpudt = *mkpf-cpudt.
save_ematn = *mseg-ematn.
save_lgort = *mseg-lgort.
save_ladr = *ladr.
   *t001w = t001w.
save_werks = *t001w-werks.
save_name1 = *t001w-name1.
   *ekko = ekko.
   *am07m = am07m.
save_lifnr = *ekko-lifnr.
save_ebeln = *ekko-ebeln.
save_ekgrp = *ekko-ekgrp.
save_linam = *am07m-name1.
save_lina2 = *am07m-name2.
   *t024 = t024.
save_eknam = *t024-eknam.
save_ektel = *t024-ektel.
   *mkpf-usnam = old_mkpf.
   *mkpf-mblnr = old_mblnr.
   *mkpf-cpudt = old_cpudt.
   *mkpf-budat = old_budat.
   *mseg-ematn = old_ematn.
   *mseg-lgort = old_lgort.
   *ladr = old_ladr.
   *t001w-werks = old_werks.
   *t001w-name1 = old_name1.
   *t024-eknam = old_eknam.
   *t024-ektel = old_ektel.
   *ekko-lifnr = old_lifnr.
   *ekko-ebeln = old_ebeln.
   *ekko-ekgrp = old_ekgrp.
   *am07m-name1 = old_linam.
   *am07m-name2 = old_lina2.
save_lfa1 = lfa1.
IF NOT old_lfa1 IS INITIAL.
    lfa1 = old_lfa1.
ENDIF.
ENDFORM.                                                    "helpdata1
--- Versorgung der Hilfsfelder vor CLOSE_FORM bei Sammelscheindruck --
FORM helpdata2.
old_lfa1 = save_lfa1.
lfa1     = save_lfa1.
old_mkpf = save_mkpf.
old_lgort = save_lgort.
old_ladr = save_ladr.
old_budat = save_budat.
old_cpudt = save_cpudt.
old_werks = save_werks.
old_name1 = save_name1.
old_mblnr = save_mblnr.
old_lifnr = save_lifnr.
old_linam = save_linam.
old_lina2 = save_lina2.
old_ebeln = save_ebeln.
old_ekgrp = save_ekgrp.
old_eknam = save_eknam.
old_ektel = save_ektel.
old_ematn = save_ematn.
   *mkpf-usnam = save_mkpf.
   *mkpf-mblnr = save_mblnr.
   *mkpf-budat = save_budat.
   *mkpf-cpudt = save_cpudt.
   *mseg-ematn = save_ematn.
   *mseg-lgort = save_lgort.
   *ladr = save_ladr.
   *t001w-werks = save_werks.
   *t001w-name1 = save_name1.
   *t024-eknam = save_eknam.
   *t024-ektel = save_ektel.
   *ekko-lifnr = save_lifnr.
   *ekko-ebeln = save_ebeln.
   *ekko-ekgrp = save_ekgrp.
   *am07m-name1 = save_linam.
   *am07m-name2 = save_lina2.
ENDFORM.                                                    "helpdata2
Form Lesen Warenausgang Lohnbearbeiter -
FORM lesen_wlb USING objky.
nast_key = objky.
CLEAR retco.
SELECT SINGLE * FROM mkpf WHERE mblnr = nast_key-mblnr
                            AND   mjahr = nast_key-mjahr.
SELECT SINGLE * FROM mseg WHERE mblnr = mkpf-mblnr
                            AND   zeile = nast_key-zeile
                            AND   mjahr = mkpf-mjahr.
IF sy-subrc NE 0.
    retco = sy-subrc.
    EXIT.
ENDIF.
PERFORM tab156_lesen.
xskkz = t156-rstyp.
PERFORM tab001w_lesen.
IF NOT mseg-matnr IS INITIAL.
    PERFORM material_lesen.
ENDIF.
ON CHANGE OF mseg-lifnr.
    PERFORM read_address.
ENDON.
ENDFORM.                    "lesen_wlb
*eject
Fuellen der ITCPO -
FORM itcpo_fuellen.
IF xscreen NE space.
*- Testausgabe auf Bildschirm -
    itcpo-tdpreview = 'X'.
    itcpo-tdnoprint = 'X'.
ELSE.
    CLEAR: itcpo-tdpreview,
           itcpo-tdnoprint.
ENDIF.
MOVE-CORRESPONDING nast TO itcpo.
itcpo-tdcover   = nast-tdocover.
itcpo-tddest    = nast-ldest.
itcpo-tddataset = nast-dsnam.
itcpo-tdsuffix1 = nast-dsuf1.
itcpo-tdsuffix2 = nast-dsuf2.
itcpo-tdimmed   = nast-dimme.
itcpo-tddelete = nast-delet.
itcpo-tdcopies = nast-anzal.
itcpo-tdprogram = sy-repid.
ITCPO-TDTELELAND = US_COUNTRY.
itcpo-tdsenddate = nast-vsdat.
itcpo-tdsendtime = nast-vsura.
itcpo-tdnewid   = x.
ENDFORM.                    "itcpo_fuellen
*eject.
------------ FORM lesen der Lagerortadr. ---------------------------*
FORM ladr_lesen.
DATA:    BEGIN OF addr_sel.
          INCLUDE STRUCTURE addr1_sel.
DATA:    END OF addr_sel.
CLEAR ladr.
SELECT SINGLE * FROM twlad WHERE werks = mseg-werks
                       AND lgort = mseg-lgort
                       AND lfdnr = '001'.
IF NOT twlad-adrnr IS INITIAL AND sy-subrc IS INITIAL.
    MOVE twlad-adrnr TO addr_sel-addrnumber.
ENDIF.
CALL FUNCTION 'ADDR_GET'
    EXPORTING
      address_selection = addr_sel
    IMPORTING
      sadr              = ladr
    EXCEPTIONS
      OTHERS            = 1.
ENDFORM.                    "ladr_lesen
**&      Form REPRINT
      text
*FORM reprint.
TABLES : nase.
DATA : x TYPE string.
IF nase-vermo = 2.
   x = 'REPRINT'.
ENDIF.
*ENDFORM.                    "REPRINT
Kindly do the needful.
Thanks in advance
Regards
Swarna

Hi Swarna,
CALL FUNCTION 'OPEN_FORM'
EXPORTING
device = 'PRINTER'
language = language
OPTIONS = print_infos
<b>form = tnapr-fonam</b>
dialog = ' '.
x_open := x.
I thing its not a good way to pass the Form name to the Parameter.
Try like,
data : temp_form like tnapr-fonam.
<b>form = temp_form</b>
Thanks.

Zebra Printing in Smartforms

Hi Experts,
Can you give me a step by step procedure to create a smartform for Zebra Printing. HOw different is it from normal smartform development?
Thanks in advance,
Regards,
Ravi

Hi Ravi,
My name is Andy Rogerson and I work for Zebra Technologies. Please send me an email to [email protected] and I can send you a Whitepaper that steps your through what you need to do to print to a Zebra printer.
It is essentially the same as any other printer but there are some differences when it comes to barcodes.
Regards,
Andy

Adobe and Zebra printer

Hello All,
I have two questions on this topic:
Has anyone use Adobe forms and print a label using zebra printer? Currently we are using smartforms and we have to send command to rotate the text in the label. Will the Adobe forms works without the need of sending rotate command?
Also, would like to check on how to utilize different printer fonts that is available in zebra printer. In smartforms, only Helvetica font is supported and if you need additional fonts, you need to create a print control for it. By using Adobe forms, I'm hoping there is an easy way to do this. I read some documentation that in order to add the fonts, we need to put the font file in a certain directory and that's it. I'm not sure if this also valid for zebra printer.
Any info would be appreciated. I'm trying to make a case that by going to Adobe form at least for printing solution/non interactive forms, will help the form programmer to expedite the form design compared to smartforms especially when dealing with zebra printer.
Thanks in Advance

Hi Bill,
yes it works - we use it productive for half an year to print barcodes and so on...it works good, if you have configured it well...i will try to give you some helpful hints:
1. If ADS is not configured yet in your installation use the guide "Adobe Document Services Configuration for SAP NetWeaver 7.0"
2. read SAP Note 685571 - it describes how to install the xdc file for Zebra Printers into the sap system (you have to install it on the system your sap runs - not the ads system). The appropriate device type is the AZPL203 (we tried a little bit to find this out)
3. in SPAD define a Printer, use devicetype AZPL203, if your Zebra Printer is connected via LAN (i recommend this) use the host spool access method "C - direct operating system call"
4. be sure to have a zebra printer supporting ZPL2 - for example first we tried it with Zebra TPL 282x series - it doesn´t worked - then we found out that the printer model must support ZPL2.0 for Adobe Printing, now we use a newer model the Zebra TPL 2824 PLUS with integrated LAN interface.
5. and last but not least !!! if you are using a windows printserver, you have to use the driver "ZPL TLP 2824 Plus (ZPL)"
(6. try to use the most recent patches for your ads system)
good luck - i would be glad to hear from you.
best regards
Winfried

How do we enable cutter option in the SAP Script for Zebra Label Printer

Hi Gurus,
We use Zebra Label(ZM400) printers to print the material documents(SAP Script). Could someone please tell me how do we enable the cutter option in the Zebra printer for the SAP Script?
Your vaulable answers will be highly appreciated.
Thanks in advance.
Regards,
Manoj.

Hi Manoj,
In Script you dont want to add any logic for Label Cutter, It should be in the Zebra printer settings if the printing is over it should cut the paper. If the print area is predefined for your material label then you can make use of standard label papers (Like 2"x4", 3"x4"....)
Regards
GK.

An API for Printing

hello,
has anybody gone about writing an API for printing?? if so can i have a look coz iam working on that, thanx
asrar

look into the tutorial man !
=>http://java.sun.com/docs/books/tutorial/2d/printing/index.html

Not printing the label in the zebra printer for 4 X 7 inch size

Dear all,
Iam trying to print the barcode in the label of size 4.00 X 7.00 inche in smartforms , for which i have created a page format in SPAD with 4 x 7 inch and specified the same in Form interface and specified 4.00 x 6.00 inche in the MainWindow of smarforms,
im getting the print preview ,but it is not printing it in the printer, i checked with the zebra printer set up also and in the printing preferences i gave it as user defined.
but when i tried with page size of 4.00 x 6.00 , it is printing without any problem. but my requirement i need to print that in 4.00 x 7.00.
Can anybody guide me how to resolve this.
thanks in advance. Points assured.

sorted out by setting the SPAD - Device types
format, just added the zxxx format to this and now it is working

Define printer for Zebra

Hi Sapfans,
We created one form in PDF-based forms for print in Zebra printers. This form has ZPL code.
After we have created in SAP one output device for this printer with all steps of the note 685571, XDC file AZPL203.
Now, when I run this form for one laser printer, we don't have any problem, if I choose the output device for zebra, I have the below error message:
ADS: com.adobe.ProcessingException: XMLFM Exception - P(200101)
Message no. FPRUNX001
I have tested other forms with others printers, run without errors. So my ADS definitions and connections seems to be ok.
Can you help me on zebra output device???
All ideas/comments are welcome.
Ana Moreira

Hey
Have you solved the problem by now???
Please post any solution if you have one
Thanks ahead
Eyal

Label printing on ZEBRA printer TLP2844 with smartform

Hi Gurus,
Requirement:
Print label on Zebra printer with smartform
1. i have created a smartform with desired layout
2. and trying to print on Zebra printer
Questions:
1. smartform is not printing on zebra printer
2. suggest me if there are any ways to print smartform on zebra printer
3. does it requires any native programming language for printing labels on zebra printer
Best Regards,
Krishna

hi Krishna,
This printer does not support ZPL2 so I thnk you cnnot use the device types like LZEB2. It should work to print via windows and a device type like SAPWIN or SWINCF.
Regards,
Aidan

API for Zebra printer language

Similar Messages

Maybe you are looking for