Apogee jam not showing

I have an Apogee Jam USB audio interface. It shows up and works under MainStage, GarageBand and in system prefs > Sound, but it does not show up in Apple Logic Pro. I'm using Logic 8.0.2.   I can't use it as I can't set it as the audio device in Logic's Preferesces > Audio > Device.
I also have a MOTU Traveler audio interface, and it shows up just fine in Logic.
Is there some way to have Logic take a fresh look at what audio interfaces are there?  It seems so odd that it shows up under MainStage, but not under Logic.
i am running on a MacPRO 10.7.2
Any thoughts on getting the JAM to show up in logic would be appreciated.
I know there is v9 out there, but I don't want to shell out $ just to get it to show up.. I can't think of any reason it shouldn't work in v8.
Thanks!
Bill

Ah.... wait... update for you.  I restarted Logic after creating the "Aggregate Device" in the Audio Midi setup tool and now "Aggregate Device" shows up in the pick list in Logic 8 and after I selected it, it is working!
So it looks like this now in the OSX Audio Midi setup tool:
Clock Source: Jam
Sample Rate: 44100.0Hz
USE                    AUDIO DEVICE          IN     OUT          DRIFT
X                             Jam                         1      0               X
X                             Motu Traveler           22    22              X
All the other in/outs are left unchecked.

Similar Messages

  • Why does Apogee Jam not work with the Ipod Touch 4G

    Hi,
    I have a Apogge Jam an it works fine with my Mac Book, but it does not seem to be compatible with my Ipod Touch 4g.
    Only the Gibbson L&M app recognize the Apogee Jam, but no other App (Ampkit, ....) :-((
    With the IPhone 4 it shall work, can tell me anybody why Apogee Jam is not compatible with the Ipod Touch 4g (
    although the Gibson-App works)?
    Is there perhaps still other Apps which work with the Ipod Touch and Apogge Jam?
    Thanks
    Michael

    I cannot answer the specifics, but I would guess it is a software issue because Griffin iTalk app will cooperate with the Apogee JAM on an iPod Touch 4g running iOS5.  If this app can do it, then one would presume the other apps could be updated to do it also.
    From last week up until yesterday, Apogee actually listed the 4G Touch as a compatible device with the JAM.
    Apparently there was some confusion about Garageband now supporting iPod Touch and its functionality with JAM.

  • Apogee Duet Not Showing up in System Preferences, device is getting power.

    I've got a newer Mac Book Pro with only the Firewire 800 port. I've hooked up my Apogee duet through an 800/400 Firewire cable. The Duet has power but is not showing up as an audio interface option in my system preferences. I've downloaded the latest software from Apogee and installed it, then restarted but nothing's working right now. I'd greatly appreciate and help or suggestions.
    Thanks

    I have the same MBP. All new. Have just received notice rom Apogee that my machine lacked an audio driver.
    On their recommendation I updated the OS to 10.6.2. and vioila!
    Frode

  • Jam packs showing in finder but not in loop browser

    Hi, i've got all the jam packs installed and showing up in the library under the audio folder but they do not show in the loops browser of Logic 9.1.3. Does anybody have an idea on how I can get them to "sync"up with the loop browser or import them into the program. Thanks much.

    I'm having a similar issue, but with gigs of new sample libraries. http://discussions.apple.com/thread.jspa?threadID=2696089&tstart=0

  • When I connect my guitar using apogee jam the note drops off after a few seconds. Why???

    When I connect my guitar using apogee jam the note drops off after a few seconds. Why???
    Its the same on most of the preset amps.
    Please help, the apogee cost me £80!

    Is it stopping recording after 8 seconds? Are you using Garage Band?
    If both of these are correct:
    This is actually a feature (i'm not sure why it defaults to this).  Instructions for the iPhone version are below:
    With the amp section open, touch the sproket on the upper right.
    You should be in a "settings" type area with three tabs.  Touch "Sections"
    Select the section and switch it to automatic - it will now record until you stop recording by touching the stop icon.

  • Apogee Jam (firmware 1.5) not connecting to Garageband on iPad 2 (iOS 5.1.1)

    Hi,
    Have just bought Apogee Jam. Works great with Garageband on iMac. But when trying to use it with Garageband on iPad, it woun't connect; most of the time the blue light is on, but every 15-30 seconds the green light flashes for a second or so.
    I have newest version of Garageband, iOS, and firmware for Apogee. Anyone recognizes this problem?
    Thanks,
    Klaus

    First thing to try is a reboot of your iPad. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider until the Apple logo appears. Let go of the buttons and let the iPad restart. See if that fixes your problem.
    This solves many problems. Are you sure you have enough space left on the devices to hold the downloads?

  • Garage band suddenly does not work with my apogee jam.  What's going on?

    Worked fine last week.  Hooked it up tonight and I can't get it to recognize the apogee jam.  Tuner still works... No sound and monitor light refuses to connect.  Very frustrating!!!

    Try to reset GarageBand:
    Go to the "Settings" app, and scrolll down all the way to GarageBand, enable "Reset".
    Does it only happen with one particular GarageBand project, or any project?  If it is only one project, delete it and start over with a new project.
    If happens with all projects,
              restart your device.
    or       reset your device

  • Garageband - using apogee Jam and acoustic guitar sound

    Hi
    I am trying to record an acoustic guitar on garageband (using my actual acoustic guitar), however the sound of the low strings sounds really muffled and low quality. i am using the built-in mic on my Mac to do this, not any external equipment. Is it advisible to always use an external mic and/or directly plug any instrument directly into the Mac? Are there any methods to improve the sound of recording?
    I also purchased an apogee Jam device to plug electric guitar and bass directly into my Mac and record. It seems to be working, however, i cant get any output sound at all (when playing or recording). it does record, but only like an unplugged electric instrument would sound. On the 'Track' menu at the top, the option to 'show monitoring for real instrument tracks' is greyed out when i have the Jam plugged in. i cant find any way to hear the instrument in Garageband at all.
    I am using a Mac Book Pro, Garageband 11 V. 6.0.5.
    Any help, much appreciated!
    Thanks
    Dom

    Dom,
    Double check that your JAM the selected input source by opening System Preferences>Sound>Input and select JAM. When you open GarageBand make sure to start a new "Real Instrument Track" or "Guitar Track" (if you want to add any crazy effects to the acoustic signal). Also make sure to select the button "I want to hear my instrument as I play and record."

  • Loop browser not showing all loops

    I have all of the jam packs and have installed them. Now I am noticing that not all the loops are showing up in the loop browser. For example I select guitars, acoustic, I see 12-8 acoustic strum 01 and 03 but no 02. I look in the folder for jam pack 3 and there sits 02. Why is it not in the browser? I have dozens of loops in my folders that are not showing in the browser. Why?

    I have the same problem, only mine may be a little more extensive. I had to do an archive/install to fix a problem I had with some problems. I then upgraded to the new version of Garageband and in the program only half of the loops show up and I can't access the rest? If someone can help please do...
    iMac G5   Mac OS X (10.4.8)  

  • 6/8 Beta Monkey loops do not show up in loop browser

    I installed the loops, created new song in 6/8 time, but they will not show up in the loop browser. I can drag the actual file in and that worked, but I would like it to work as it is supposed to

    I followed the instructions here to reindex the loops:
    http://docs.info.apple.com/article.html?artnum=107977
    However after that, all the loops were not showing (mainly from the Voices Jam Pack). In the Finder, I see ones called "Nathan Improv" 01-14. However in the Garageband loop browser, I only see 01, 02, 04, 05, 10, 11, and 12. Out of the 1500 loops, it's only showing 429 under all effects.
    Finally found another link: http://www.bulletsandbones.com/GB/GBFAQ.html#noloops
    which had a blurb about missing loops:
    +Also note that loops in a different time signature than your song, will not be displayed. Additionally, by default, the loop browser only displays loops within two semitones of the key of your project. Turning off "Keyword Browsing" in GB's prefs will allow all loops to be displayed regardless of key (the time signature requirement still applies).+
    I turned off Keyword Browsing and was able to see all the loops in Voices that I wasn't able to see before.

  • Loops will not show up in browser

    Im new to Garageband..still, I keep getting a message that no apple loops are installed even though I know they are. I have even installed a Jampack and another set of ProSessions loops. When I try dragging the folders into the broswer, they still do not show..what am I doing wrong?

    I followed the instructions here to reindex the loops:
    http://docs.info.apple.com/article.html?artnum=107977
    However after that, all the loops were not showing (mainly from the Voices Jam Pack). In the Finder, I see ones called "Nathan Improv" 01-14. However in the Garageband loop browser, I only see 01, 02, 04, 05, 10, 11, and 12. Out of the 1500 loops, it's only showing 429 under all effects.
    Finally found another link: http://www.bulletsandbones.com/GB/GBFAQ.html#noloops
    which had a blurb about missing loops:
    +Also note that loops in a different time signature than your song, will not be displayed. Additionally, by default, the loop browser only displays loops within two semitones of the key of your project. Turning off "Keyword Browsing" in GB's prefs will allow all loops to be displayed regardless of key (the time signature requirement still applies).+
    I turned off Keyword Browsing and was able to see all the loops in Voices that I wasn't able to see before.

  • Report not show after submit query in parameter form

    Hi, anubody can help me with this
    report not show after click submit query button in parameter form

    To help you see what is happening, temporarily add DESNAME to your parameter screen. Make sure that DESNAME on the parameter screen has a value before you click the Submit Query button.
    If you are running the report with a local report service (running on your workstation), the value of desname should be the name of your default printer.
    If you are running the report on a network application server based report service you need to specify the name of a printer that is accessible to the server on which the report service is running. Make sure that it is specified in a way that the server can recognize it, e.g. \\printserver_01\HPLaserJ4210.
    Maybe this will help some.
    James K.

  • Apogee Jam No longer working after 1.1 update?

    My apogee jam is no longer working after updating to Garageband 1.1. I have an Ipad 2 with firmware 4.3.3.
    Specifically what happens is:
    1. I open the garageband app
    2. I select the guitar amp
    3. I plug the Jam chord into Ipad (guitar is already connected to cord)
    4. Jam light goes green, blue, bright green then green
    When Jam light goes bright green, the monitor button in garageband goes dim and doesn't work.
    I've tried plugging my guitar in first, then starting garageband, no difference in results.
    I have tried turning the monitor "on" prior to pluging in the jam, when I do this the monitor/sound gate window stays open until the Jam bright green goes on, then it disappears and the monitor button goes dim.
    Outside the garageband app, the ipad does recognize the Jam in settings, general.
    What's worse (for me...) is that I backed up the Ipad in itunes thinking that app data would also be backed up (as I read that in a description of backup). I then deleted garageband from the ipad and then restored it from itunes. Guess what, lost all my songs... Bummed out... Why wouldn't my songs be backed up???
    Anyway, any ideas on the Jam issue would be greatly appreciated. I'm hoping I am just overlooking a setting?

    Unfortunately, I don't believe that Apple keeps prior versions of Apps available at the store. GB was the first app I purchased there day one of my Ipad, incredibly worth the $, and I did actually look to see if you could go back legitimately.This is just one of the many reasons to JBreak your devices, so that you can go backward if you need to. This is a perfect example of why Apple should make prior versions available, but they think they know it all and never make mistakes, so that will never happen. Again, this is why folks take things into their own hands and why the scene exists. There are plenty of abuses, more than not IMO, but here is a perfect example of how people are screwed and can't use their Jams any longer without a JBroken device. They obviously know that this issue exists, they have employees on these forums. It will be months if ever they fix this issue, because the number of owners of Jam, although in the thousands, is small potatoes compared to the Apple owner universe. I believe it will only be fixed if Apogee is able to put enough pressure on Apple. If you see the Jam removed from the Apple store and GB site you know that Apple is choosing not to fix it, because they won't sell or promote it directly and then have to deal with complaints and returns. But even this will happen slowly...
    Actually it occurs to me that Apogee may have to redesign the Jam AGAIN in order to get it working with 1.1 on Ipad 2 and Iphone 4s (devices with the newer processor). I wonder if they will recall or replace the Jams for people who now have Jams not compatible with Garageband. Again, Apple should be posting a warning for Jam owners on the Garageband download page, but that will never happen because Apple doesn't care about small potatoes.
    Message was edited by: Rickd3333
    Message was edited by: Rickd3333

  • My Lacie Big Extreme Hard drive does not show connection speed

    *My Concern*
    Hi I have a Lacie Big Extreme Hard drive, which although works fine is not showing its connection, shows up in the system profiler as 'Connection Speed Unknown'. -Should I be worried? I have other drives connected to my G5 Dual 2 gig machine and no problem their they all show their connection speeds.
    *Other Firewire 'Unknown Speed connection' related Problem*
    I had a DVD LaCie Dual layer portable Firewire drive which recently suffered from the same problem and I had to send it back. This was due to it slowly developing a fault of not being able to burn dual layer disks properly.
    *What I have done to try and remedy the situation.*
    I have been able to do the following but I am afraid with no change in the system Profiler;-
    1 Trashed the whole system and rebuild
    2 repair my permissions
    3 empty out all my caches with OnyX (third party app) version 1.8.5
    4 Disconnected all drives and reconnected them one by one to see if there are any anomalies within the system
    5 switched my G5 off removed the plug from the wall waited 30 sec for it to reset itself this was the 1st attempt. On my 2nd attempt I then cold booted the machine and reset Pram settings
    6 used Tech Tools Pro 4 version 4.1.2
    7. Replaced Power supply of the offending unit (didn't have to but I wanted to be safe and eliminate this fronm the equation.
    9.tried changing around the order in the chain to which the drives were connected to the G5but alas no joy!
    Summery
    So my concern is if a device which is Firewire shows up in the system profiler as connection speed unknown should I begin to worry even though it appears to be functioning.
    Thank you ahead of time for any help on this matter
    *Supporting evidence*
    Please see below a shot of my System profiler so you can see what I mean:-
    *(Important Note)*
    The Lacie Big disk has 800/400 Firewire connection speeds I have connected it straight to my G5s firewire 800 port then daisy chained the LaCie's via its other 800 port to the two other 800 Firewire Hard drives.
    When the LaCie DVD DL drive was connected, I connected it straight to the 400 firewire port. As it needed direct access to the G5 for it to function optimally.
    *System Profiler Info under OSX Tiger 10.4.11*
    FireWire Bus:
    Maximum Speed: Up to 800 Mb/sec
    LaCie d2 Extreme LUN 0:
    Manufacturer: LaCie Group SA
    Model: 0x0
    GUID: 0xD04B710B061FB5
    Maximum Speed: Up to 800 Mb/sec
    Connection Speed: Up to 400 Mb/sec
    Sub-units:
    LaCie d2 Extreme LUN 0 Unit:
    Unit Software Version: 0x10483
    Unit Spec ID: 0x609E
    Firmware Revision: 0x102
    Product Revision Level: P22O
    Sub-units:
    LaCie d2 Extreme LUN 0 SBP-LUN:
    Capacity: 153.38 GB
    Removable Media: Yes
    BSD Name: disk2
    OS9 Drivers: Yes
    S.M.A.R.T. status: Not Supported
    Volumes:
    disk2s6:
    Capacity: 153.38 GB
    Available: 102.21 GB
    Writable: Yes
    File System: HFS+
    d2 quadra (button):
    Manufacturer: LaCie
    Model: 0x4136
    GUID: 0xD04B840A07A9A5
    Maximum Speed: Up to 800 Mb/sec
    Connection Speed: Up to 400 Mb/sec
    Sub-units:
    d2 quadra (button) Unit:
    Unit Software Version: 0x484944
    Unit Spec ID: 0xD04B
    d2 quadra Unit:
    Unit Software Version: 0x10483
    Unit Spec ID: 0x609E
    Firmware Revision: 0x110
    Product Revision Level:
    Sub-units:
    d2 quadra SBP-LUN:
    Capacity: 465.76 GB
    Removable Media: Yes
    BSD Name: disk4
    OS9 Drivers: No
    S.M.A.R.T. status: Not Supported
    Volumes:
    disk4s3:
    Capacity: 465.64 GB
    Available: 250.79 GB
    Writable: Yes
    File System: Journaled HFS+
    LaCie Big Disk Extreme LUN 0:
    Manufacturer: LaCie Group SA
    Model: 0x0
    GUID: 0xD04B741A058BFC
    Maximum Speed: Up to 800 Mb/sec
    *Connection Speed: Unknown --------------------------**{this is where my concern lies}*
    Sub-units:
    LaCie Big Disk Extreme LUN 0 Unit:
    Unit Software Version: 0x10483
    Unit Spec ID: 0x609E
    Firmware Revision: 0x102
    Product Revision Level: 912
    Sub-units:
    LaCie Big Disk Extreme LUN 0 SBP-LUN:
    Capacity: 931.52 GB
    Removable Media: Yes
    BSD Name: disk3
    OS9 Drivers: Yes
    S.M.A.R.T. status: Not Supported
    Volumes:
    disk3s6:
    Capacity: 931.52 GB
    Available: 181.67 GB
    Writable: Yes
    File System: HFS+

    Hi BDAqua - thanks a lot for replying - really appreciate your help. I was using Time machine to back up on the old lacie drives that I have - I just backed up on both lacies and they backed up faster for some reason but that might have been because they were very small back ups as I did full back ups on Tuesday night - this is the info under the USB section > hardware > about my mac - it didn't show the speed like the example you gave me though but it still backed none the less  :
    USB Bus:
      Host Controller Location: Built In USB
      Host Controller Driver: AppleUSBOHCI
      PCI Device ID: 0x0035
      PCI Revision ID: 0x0043
      PCI Vendor ID: 0x1033
      Bus Number: 0x15
    Bluetooth USB Host Controller:
      Product ID: 0x8207
      Vendor ID: 0x05ac  (Apple Inc.)
      Version: 19.65
      Speed: Up to 12 Mb/sec
      Manufacturer: Apple Inc.
      Location ID: 0x15200000
      Current Available (mA): 500
    Current Required (mA): 0
    I also got a reply back from WD on the hard drive and they said the following - exactly the same as you about it being a problem with the power supplied hence why the disk won't mount - so you were spot on - so I'm thinking I should go ahead and get the newertech 7 USB port 4 amps as you suggested - let me know what you think and then I'll just order it - and thank you - really do appreciate your help on this - thanks Jayas
    Dear Jayas
    Thank you for contacting Western Digital Customer Service and Support. My name is James.
    If the drive is working fine on one system but failing on another especially with the "clicking" sound this is an issue with the system not being able to supply enough power to power the device.
    These devices require power from the machine to make them operate if there isn't enough power supplied the drive will fail to work. This is why you are having no issues with one system but are on another.

  • Officejet 6600 fax not showing up in menu using windows 7 64

    I using windows 7 64 I reinstalled hp software for Officejet 6600 all in one, but my faxing software will not show up in the menu . I have removed all drivers related to Officejet 6600 several times same problem every time . The fax menu was there before all hardware is still the same.

    Hi G2123,
    I understand you are no longer able to fax from your computer as the Officejet 6600 fax is not showing up. I suggest starting with the HP Print and Scan Doctor.
     The HP Print and Scan Doctor is a free utility (tool) that helps to quickly resolve common printing, scanning and connectivity issues including but not limited to:
    Connectivity :
     USB: Verifies that the USB connection from your computer to the HP product is working correctly.
    Network: Verifies that the network connection between your computer and your network is working correctly.
    Device Status Test : Checks for device errors such as out of paper, paper jams, carriage stalls, and paper feed issues, and then provides instructions for fixing the error.
    Driver Check : Checks for missing or corrupt driver files.
    Device Manager : Checks for problems in Device Manager that would prevent printing.
    Device Online : Checks if the product has been paused or set to offline, and then sets the status back to online if necessary.
    Print Queue : Checks for and clears pending print jobs in the print queue (a log of print jobs waiting to print).
    Port Match : Checks the port settings for the HP product.
    Device Conflicts : Checks for conflicts with other drivers, such as other printer brands.
    Ink Issues : Checks the cartridges and ink levels for issues that affect print quality.
    Print Settings : Checks and adjusts the print quality settings.
    Test Print : Prints a test page for print quality evaluation, and provides options for cleaning and aligning the printhead if necessary.
    Scan Tests : Checks the scan mechanism, drivers, and registry entries.
    You can also click the Printer menu to find the additional features such as cleaning printheads, aligning printheads, checking ink levels, and viewing advanced printer data for your selected printer.
    Source: Try the HP Print and Scan Doctor for Windows
    Click here to download and run the utility > HP Print and Scan Doctor
    Please let me know if this resolves the issue, thanks.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

Maybe you are looking for