Apple Configurator could not open your library

Hello all,
I am having an issue with apple configurator. It froze up while I was running app and iOS updates on an iPad and I had to Force Quit Configurator. When i tried to reopen i got the error that says "Apple Configurator could not open your library. The file couldn't be opened."
My latest backup of this computer is a bit old so I am trying not to have to restore this computer with that backup and have to backtrack a bunch. Anyone have any ideas on how to get the library back or restore it without having to fully restore from a backup of the computer.
thanks

I've had the same error appear as well and have managed to fix it.
Inside the /Users/Shared/SC Info folder is a file named "SC Info.sidb". Both the file and the folder are hidden so you'll have to remove it using Terminal.
rm /Users/Shared/SC\ Info/SC\ Info.sidb
Delete this file and it will work again.

Similar Messages

HT200261 Configurator Error. Apple Configurator could not open your library.The file couldn't be opened because it isn't in the correct format.

I was using configurator without trouble. Unfortunately, my battery died and my computer went down. I plugged my computer in, restarted it and tried to open configurator. Now this is the error I am getting. Apple Configurator could not open your library.The file couldn’t be opened because it isn’t in the correct format. How do I fix this?

Thank you for responding. The number 2 after the file final cut events is temporary so I can copy it to another drive while I am working on this. . i got a new message that reads...
Final Cut Pro must restore or move corrupted databases before opening.

Recover redemption codes/Apple configurator could not open your library

Hi,
I closed Apple Configurator down when a couple of iPads weren't responding and not unsupervising as they were supposed to. When I started it back up it said "Apple Configurator could not open your library. The file couldn't be opened.' I've tried restarting, updating, and searching google for a fix.
I did come across this: Re: Apple Configurator 1.2 "The file couldn't be opened", but when I went to search for ~/Library/Containers/com.apple.configurator, it turned out that the directory doesn't even exist.
I don't have Time Machine enabled on this macbook, and we have a number of redemption codes at risk of being lost here as everything is saved in that configuration.
Alternatively could someone please advise if/how it's possible to use the redemption codes we had purchased again - if we were to start again with a brand new installation of AC?
I would greatly appreciate some support with this issue.
Many thanks,
Martin

This has happened to me a few times and in each instance it has been solved by going to the computer and toggling sharing on and off. If this alone doesn't solve your problem try rebooting the computer and then the ATV.
The error message, suggesting that you make sure your computer and ATV are on the same network isn't likely to be helpful, especially if your ATV and computer are both connected via Ethernet. Most likely your ATV just isn't able to get a share connection from the computer and the above should solve that problem.

Apple Configurator Could not Open

Hi,
We can not open Apple Configurator on one of our Macbook.
When tried, this error message pop up The operation couldn’t be completed. (com.apple.mdk.fairplay.error error -42110
We have tried to use different account and renew the plist, and still doesn't work.
Would anyone know the fix for this?

I've had the same error appear as well and have managed to fix it.
Inside the /Users/Shared/SC Info folder is a file named "SC Info.sidb". Both the file and the folder are hidden so you'll have to remove it using Terminal.
rm /Users/Shared/SC\ Info/SC\ Info.sidb
Delete this file and it will work again.

Apple tv could not connect to library

Hi, my apple tv (2nd generation) doesn't connect to my itunes library. It reconizes my computer and my housband from home sharing, his a PC it loads the library, but mine from 3 days now, shows always the same message "apple tv could not connect Ana Carolinaa's library". I did every thing the troubleshoting sugested me, but nothing works. It worked perfectly from 3 weeks and now just don't work!!! Can some one help me please?

I have exactly the same problem. I even remove and install itunes again but it still same. I have the apple tv icon in itunes and can send video or music which is playing in itunes to Apple TV but when I choose from Apple TV to connect to the computer it says: "Apple TV could not to Library" ??
Any idea?

Apple Configurator Could not refresh the ios update catalog

I tried to open up apple configurator today and it's giving me an arror saying "Could not refresh the iOS update catalog. The store's response could not be parsed." I have no idea how to even start troubleshooting this. any tips?

This is an annoying problem. I have phones and pads that I have to release for the Corporate world. I thought macs/apple were supposed to be perfect .
Any Fixes or responses to this as a potential iTunes problem.
Is this an iTunes to server conn problem or would this be a problem with the software to iTunes programming?

Apple Configurator could not access its supervision certificate.

Hi There,
My Apple Configurator keeps getting this error when ever i open it.
Just wondering if anyone could help me, got no idea what to do.
Thanks

I had this issue today when I updated my Configurator and after looking into Keychain found that there is a Private Key entry for Apple Configurator.
Double-click on the private key and then click on 'Access Control'
From here I figured that the reference to Apple Configurator in here is the original one that was replaced, so I removed it and then clicked the + to add it fresh.
After doing that my Apple Configurator loaded as normal.
Hope that works for you.

ORA-15180 : Could not open dynamic library ODM library error

Hi,
I am facing the error ORA-15180 while trying to start the database.
DB Version:11.1.0.6.0
I have the administrator privileges in my system.
I have given permission to my ID to the LIB folder, with Full control.
OS used: Windows Server 2003.
Regards,
Abdul

plz look into the metalink note 738047.1
Regards,
Mohd Mehraj Hussain
http://mehrajdba.wordpress.com

Adobe Reader could not open InDesign PDF...

Just installed InDesign. I can "EXPORT" a PDF, but cannot "PRINT" a PDF. Error message says: "Adobe Reader could not open your PDF because it is either not a supported file type or because the file has been damaged. (For example, it was sent as an email attachment and not properly decoded)". What does this mean? My PDF's print from all other programs on my computer. Running Windows 7.

I'm having the same issue when exporting a pdf from InDesign CS6 and trying to open the resulting pdf...

Could not open wrong kind of document

Hi
This is not really a problem for me but curious to know why and how to eliminate
New pc--- New "successful" installation of cs6 extended -- No other programs etc in use -- First (and further) opening of cs6 displays "could not open your request because it is the wrong kind of document"-- Nothing requested --click ok ( or remove display ) and can continue without any problems Why and how do i find this document since details are not not displayed
thanks
bri

Hi Mylenium
Sorry about that
The pc is new and custom built for photo editing etc . CS6 extended was indicated as installed" successfully". No other programs were in use and when I opened cs6 the screen displayed " cannot open your request because it is the wrong kind of document ". Only by clicking OK to this or removing this display was I able to continue using cs6 without any problems. If I close down cs6 and then re-open the same ocurrs . Until I remove the display I am unable, to use the browser, say, to open a file. However, assuming cs6 has not been opened and I select a file jpg/ tiff etc from a picture folder and then " send this file to cs6 "( via a shortcut) cs6 opens without the previously detailed display So as I mentioned it is not a major problem for me but I am curious to know why this happens and how such a document, which has not been rquested , might be located and removed
Hope I have explained better
Thanks
Bri

Everytime I open Firefox - error: "...Firefox could not find your Proxy configuration..." The thing is I'm not using Proxy. Then I go to settings windows, network, put No Proxy, and then everyting works ok. BUT always I open Firefox, it happens again.

Everytime I open Firefox, it shows me a error: "...Firefox could not find your Proxy configuration..." The thing is I'm not using Proxy. Then I go to settings windows, network, put No Proxy, and then everyting works ok. BUT always I open Firefox, it happens again. Help me , Please
Everytime I open Firefox, settings in Network appear: Manual Proxy and shows me a ip number and port

See:
* http://kb.mozillazine.org/Preferences_not_saved

When opening a file in Photoshop CC I get 'Could not complete your request because of a program error.'

I can see this is a generic error message('Could not complete your request because of a program error.') and I have done my best to read through many of the responses.
It occurs on the second, third, or sometimes fourth file that I try to 'Open', however I can still use the 'Open With' command through Finder.
I have tried resetting the preferences as per Julieanne Kost's recommendations, I have reinstalled Photoshop CC 2014, Generator isn't turned on, I don't have any Third-Party plug-ins loaded, I have tried running it in Safe mode, and I have reset my iMac's PRAM.
Photoshop doesn't appear to be writing a PSErrorLog.txt file? (~/Library/Preferences/Photoshop CC Settings/PSErrorLog.txt)
I haven't had any other issues.
I am running Photoshop on OS X Yosemite 10.10.2.
Please can you help me?

Does anyone have any other ideas as this is very frustrating.
Thanks,
James

When I open a raw file (NEF Nikon 7100) and apply setting then click save, I get an error ( could not complete your request because of a program error ). Ideas?

when I open a raw file (NEF Nikon 7100) and apply setting then click save, I get an error ( could not complete your request because of a program error ). Ideas?

Oh, dear.
If you use PSE as your external editor for iphoto, you need to save the images back to iphoto by using Save, not Save As and not changing anything like the name or format that would bring up the Save As window. (You may need to adjust the editor prefs>saving files>on first save to save over existing.)
OR you can export the photos from iphoto to the desktop, use file>open in the editor and then change whatever you want and either import the saved image to the organizer or import it back to iphoto as a new file. What you are doing is extremely risky, particularly to the iphoto library which you may easily damage by your workflow.
I would start the organizer holding down the shift key, then create a new catalog and switch to the new one. Then try opening the editor without opening an image and see if you get any farther.
PSE and iphoto are not designed to be used as you've been doing. You are trying to write to the iphoto library from outside iphoto, which is the fastest known way to corrupt the library and lose all your photos.

Unable to install itunes Win 7, 64 bit. Error: " Could not open key: UNKNOWN\Components\DA42BC89BF25F5BD0AF19C3B9B1A1EE8\C0B7E33AC99B9CE47B20A823B86 1A19F. Verify that you have sufficient access to that key. or contact your support personnel.

Hi,
I'm not able to install itunes in my Win 7 , 64 bit. getting the below mentioned error.. any help would be greatly appriecated.
" Could not open key: UNKNOWN\Components\DA42BC89BF25F5BD0AF19C3B9B1A1EE8\C0B7E33AC99B9CE47B20A823B86 1A19F. Verify that you have sufficient access to that key. or contact your support personnel."

NCPlater to all haveing the error: ***I HAVE THE ANSWER***
iTunes
Could not open key:
UNKNOWN\Components\DA42BC83BF25F5BDOAF18C3B9B1A1EE8\3e43b73803c7c394f8a6b 2f0402e19c2. Verify that you have
sufficient access to that key. or contact your support personnel.
After following instructions for three different solutions that did NOT work; I found the solution that did work
on the support site for Syamntec.
Readers - Please, you must be VERY familiar with pc jargon and windows vernacular to accomplish the reset
of ALL the permissions in your registry.
Follow the ditrections below and pay attention to the notes for those running 64bit Win7.
Step one, back up the registry.
Step two, go to the MS KB: http://www.microsoft.com/downloads/details.aspx?FamilyID=e8ba3e56-d8fe-4a91-93cf -ed6985e3927b&displaylang=en and download the file that installs subinacl. It is an MSI file, and will do a quick install of a few Microsoft files. Hint: Look in the folder listed below, "subinacle.exe" may already be there.
Step three, create a batch file (subinacle.bat) with the following commands: (Use Notepad - copy & paste, not the red stuff)
cd /d "Program Files\Windows Resource Kits\Tools" (only for 32bit/x86 machines)
subinacl /subkeyreg HKEY_LOCAL_MACHINE /grant=administrators=f /grant=system=f
subinacl /subkeyreg HKEY_CURRENT_USER /grant=administrators=f /grant=system=f
subinacl /subkeyreg HKEY_CLASSES_ROOT /grant=administrators=f /grant=system=f
subinacl /subdirectories %SystemDrive% /grant=administrators=f /grant=system=f
subinacl /subdirectories %windir%\*.* /grant=administrators=f /grant=system=f
secedit /configure /cfg %windir%\inf\defltbase.inf /db defltbase.sdb /verbose
For 64bit machines substitute for first line of bat file:
cd /d "c:\program files (x86)\windows resource kits\tools"
Step four, run the batch file. Let it run until the Command Prompt screen closes, may take 30 minutes or more.
Step five, reboot the machine and run the install again.
Ladies and Gentlemen; this worked for me and allowed immediate installation of two application packages I had been trying for three months! (Including ITunes 10.5)

I am running Photoshop CS6 on a Mac OS X 10.9.3 and every time I save a large eps I can not open it again. I get this message when I try. "Could not complete your request because Photoshop was unable to parse the PostScript."

I am running Photoshop CS6 on a Mac OS X 10.9.3 and every time I save a large eps I can not open it again. I get this message when I try. "Could not complete your request because Photoshop was unable to parse the PostScript."

Oh, dear.
If you use PSE as your external editor for iphoto, you need to save the images back to iphoto by using Save, not Save As and not changing anything like the name or format that would bring up the Save As window. (You may need to adjust the editor prefs>saving files>on first save to save over existing.)
OR you can export the photos from iphoto to the desktop, use file>open in the editor and then change whatever you want and either import the saved image to the organizer or import it back to iphoto as a new file. What you are doing is extremely risky, particularly to the iphoto library which you may easily damage by your workflow.
I would start the organizer holding down the shift key, then create a new catalog and switch to the new one. Then try opening the editor without opening an image and see if you get any farther.
PSE and iphoto are not designed to be used as you've been doing. You are trying to write to the iphoto library from outside iphoto, which is the fastest known way to corrupt the library and lose all your photos.

Can't open iPhoto "To open your library with this version of iPhoto, it first needs to be prepared. To prepare the library, use the iPhoto Library Upgrader available from Apple." Doesn't work...

I've tried to open my iPhoto and a message box opens up and reads "To open your library with this version of iPhoto, it first needs to be prepared. To prepare the library, use the iPhoto Library Upgrader available from Apple." I update this and this message continues to pop up. I've even tried to rebuild it, but no matter what I do the same message appears and iPhoto still wpn't open. Can somebody please help me?!

i'm having the same problem with my iMac (Mac OS X 10.7.5) . i haven't really made any updates to it and yesterday when i tried to access the iPhoto library of my MBP (from my iMac) is when problems started. The iPhoto on the iMac initially said I need to install the recent version of the iPhoto. Since I can't find a 9.0 download, I went to buy the iPhoto on the App store.
When I tried to install iPhoto (version 9.4.3) to the iMac, I got this message:
The iPhoto Library Upgrader is a tool that prepares libraries from iPhoto 5 or earlier, so you can upgrade them with the current version of iPhoto. You can download the tool here.
Note: If your library is from iPhoto 6 or later, this tool is not required."
I then installed the iPhone Library Upgrader, but I got the same prompt:
'You can't open your current photo library using this version of the iPhoto. You have made changes to your library using a newer version of iPhoto. Please quit and use the latest version of iPhoto."
I guess this takes me back to square one? I am inclined to buy the iLife on eBay with the iPhoto 9.0 version, but needed to know if this is the case before I unfortunately bite the bullet.

Apple Configurator could not open your library

Similar Messages

Maybe you are looking for