Apple TV. Just upgraded software update. Now I seem to be losing the connection to my iTunes Library rather frequently. Any suggestions ?
I have recently updated the software on my Apple TV. I now seem to be losing the connection to my iTunes Library on my iMac rather frequently. I have reset/restarted Apple TV box, my BT Infinity box and my iMac. I would be grateful for any advice.
Welcome to the Apple Community.
You can't play music from the computer if there is none there. If you are using iTunes Match you should now be able to download and play all your music on the Apple TV from the music feature on the main page.
Similar Messages
-
When I start iTunes, how do I get rid of the message "To use this machine for downloads, enter you Apple ID and password" which I now see twice since I downloaded the latest version of iTunes. Once is enough and no checkbox exists to say "do not show this message....."
Does this apply?
If you're asked for the password to your previous Apple ID when signing out of iCloud - Apple Support -
After updating my iPhone 4S to iOS 6 the connection to Wi-Fi is lost frequently.
After updating my iPhone 4S to iOS 6 the connection to Wi-Fi is lost frequently. Please advise how to resolve this problem.
I have a similar problem: IPhone 4S (upgraded OTA) connects to cellular data while sleeping/locked. I have an Airport base station the phone connects to when awake, but at night it's using cellular data.
My second iPhone 4S upgraded to IOS 6 using iTunes shows no problem. -
I'm all Mac across the board: iPhone 5, Macbook Pro, Apple TV etc. I can't get the movies I've purchased on my Apple TV to appear in my iTunes library for viewing… Any suggestions? I have iTunes Match turned on and everything.
Thanks Terence! I can see iTunes library from neither iPhoto or iMovie . I'll check on iTunes forum.
-
Upgraded Software update - now cable doesn't work!
I went to use the software update today when I was connected to me PC. It told me there was an update to the software and to remove my phone and USB connection while it downloaded and installed. I did this and went through the update which apprently worked fine but needed to also install a cable driver update, did this as advised then tried to reconnect my phone but the PC just doesn't see it anymore.
Thanks Nokia.
My PC is running Windows XP. Software update is now 1.3.60en
Phone is N73
April 07 - just got an E65 - not too bad so far.Just my luck!! Fortunatey its not too big a problem as I have damaged my phone prior to this and am awaiting a replacement from the insurance people. I was updating to see what the update offered and if it sorted some of the issues I have with it as it stands. As for "dont fix it if it aint broke" I have never had this phone working in the way that it should. the N73 has been a big dissopointment and now I hear that it has been discontinued, no surprises there!
It disgusts me that companies like Nokia release software before it has been fully tested just because its cheaper to let the paying public do the tests and give them a greater spectrum of results. Souns to me like they're basing their business strategy on Microsoft.
April 07 - just got an E65 - not too bad so far. -
Just did software update, now mail won't open!!
I just ran a software update and now may mail application won't open. These are the five updates that I installed:
Backup 3.1.1
iPhoto 6.0.6
Airport Base Station 5.1
iTunes 7.2
Mac OSX Update Combined (PowerPC) 10.4.10
I don't think I needed to install that last one, about the Power PC....Anyone know if that is enough to keep my Mail App. from openenig? I can still check my e-mail via .Mac, just not through my Mail Appliacation.Did you download the correct Combo for PPC, since it
appears you do not have an Intel Mac?
If the correct Combo version, then I think you should
run Disk Repair from the original Tiger install disk
to check out your hard drive.
How much free disk space do you have on your hard
drive, or if partitioned, on the boot partition?
Ernie
Ernie,
thanks for the suggestions. I'm not quite the Mac expert I'd like to be, so bear with me please. How do I know if I downloaded "the correct Combo for PPC, since it appears you do not have an Intel Mac?" Wouldn't my computer automatically download the correct one? How can I check if it's the right one? ALSO,
How do I "run Disk Repair from the original Tiger install disk to check out your hard drive"? Do I need to insert the original startup disk again, or can I do it without it?
When doing info on my mac, it says I only have 6.1 GB left available. THANKS FOR YOUR HELP!!!!
Wade -
Just did software update now "must restore" with itunes but am being told it can't be restored
did a software update on my 5 now it says it needs to be restored but itunes says it can not be restored. "unable to continue withactivation" Does anyone have suggestion s?
In defense of original poster, I have had so many issues with hacking and bots, etc. - & I am certainly not jailbroken - that it has become ridiculous. There's tons of information out there about this growing problem.
-
after trying to update my i phone , the update has obviously failed and now itunes asks ,e to restore my iphone , have tried this but the restore has now taken over 24 hours ans still not complete ./ have tried to reboot pc and i phone and try restore again , but still nothing ,
try HT1808
-
I keep losing the connection on my apple mouse
I keep losing the connection to my apple mouse. The batteries are ok, but the connection still drifts in and out. Any suggestions?
You say the batteries are okay. Here are a few notes I've put together.
Whether you use regular or rechargeable batteries you should buy the best. Discounted or unbranded batteries are more likely to give a depleted performance and may be of irregular size, often leading to connection problems. Apple’s own brand, Eneloop and Energiser appear to be the best.
Rechargeable batteries for the standard Magic mouse are unlikely to exceed eighteen days before needing a recharge although the mouse itself can be a limiting factor. I have seen reports that some Logitech mice vastly exceed this. Apple may suggest more in their sales blurb but this is a realistic expectation. The benefit (if you are organised) is that you can always have charged batteries available. Regular batteries will give you between 25 and 35 days before they need to be replaced.
Note. Never mix old and new batteries or rechargeable and regular. The notes above are based on my personal experience, not shutting down my machine and using it for around four hours per day.
Note. Monitors do not always faithfully report battery strength, particularly the rechargeable ones.
When checking your mouse or keyboard batteries ... Turn off the device. Remove the batteries, Clean the terminals both inside the battery compartment and the batteries themselves. Replace or renew both batteries. Turn on the device. You should get a blinking green light if the device is paired. Click the mouse to activate it. The green light becomes steady. -
Hi I just upgraded software through iTunes then unplugged iPhone now it is stuck on the connect to intunes screen, it won't turn off and iTunes and my computer won't recognize my phone? Please help
My phone is doing the same thing. My computer acknowledges that I have connected my iPhone 4, however, iTunes will no longer connect or sync to my iPhone 4. I have uninstalled iTunes, Bonjour and all Apple products from my pc. I have re-installed them back on. I have reset my phone. I have emptied my temp folder. I have done everything. If my iPhone cannot update and sync with iTunes then I may as well get another phone from somewhere else. I am disappointed that I cannot resolve this issue.
Rebeccaspe31, were you able to resolve your issue? If so how? -
I just installed software updates to my computer and after restarting cannot access Safara. The message says because of a TelevisionFantaticsToolbar plugins. Cannot find on my computer. How do I delete this and regain access to Safari?
Save and/or quit your applications & documents Go to Applications>Utilities Folder Click Disk Utility Click the Volumne (HD) that you want to check. Click the Repair Disk Permissions button. (Don't worry about verifying) At the bottom of window when the repairs have finished, you will see the “most important thing”: Permission Repairs Complete The privileges have been repaired or completed on the selected volumne.
Restart your computer to confirm repairs.
http://docs.info.apple.com/article.html?artnum=106214 http://docs.info.apple.com/article.html?artnum=25751
http://docs.info.apple.com/article.html?artnum=25751 -
I just purchased a "Bag of Gems" for $9.99 in "Clash of Clans". The purchase did not download. I checked my account and the $9.99 transaction has posted already. I did the advise from Apple Support to do software update and still nothing.
Check restrictions. Settings > General > Restrictions
-
HT5766 Where can I find the size of a download for a software update now?
Hello,
Where can I find the size of a download for a software update now?
Since I upgraded to Mountain Lion (Mac OSX 10.8.3) this information is no longer available in software updates listing you get if you click on the Software Update menu item from the Apple menu.
I found the download size (often hundreds of megabytes for an individual update and sometimes a set of updates might amount to a few gigabytes) to be very helpful, and now that it seems no longer available (I can't even see it on the web page I came to for more information, thinking the download size would surely be specified there), it is frustrating. My current example is iTunes 11.0.3
I would greatly appreicate having this information back in the software updates listing, but since it is no longer available there, and I don't know where else to find it, if anybody can enlighten me to its whereabouts, I'd be grateful.
Thanks and cheers!stewedapples wrote:
I would greatly appreicate having this information back in the software updates listing, ...
You can leave Feedback for Apple here...
http://www.apple.com/feedback/
stewedapples wrote:
... I don't know where else to find it...
http://support.apple.com/downloads/# -
My headphone jack no longer works. I just upgraded software and did all the iCloud install.
my headphone jack no longer works. I just upgraded software and did all the iCloud install. Any ideas?
It's not clear whether your printer is included in the Apple list - there is an Officejet 6100 and a couple of other types. Go to the page linked to above and use the browser search for 6100.
I'm afraid HP are notorious for not supporting older printers - I had the same problem. Probably they hope you will buy another printer (I did, but it was a Canon). I did look on HP's site and couldn't see a driver - you could give it a try (make sure you have the exactly correct printer name):
http://www8.hp.com/uk/en/support-search.html?tab=1#/qryterm=HP6100&search_search type=s-002
Alternatively ou could try Gutenprint (open source software):
http://gimp-print.sourceforge.net/MacOSX.php
I found it would indeed drive the printer, but the colour dithering wasn't very satisfactory and the duplex printing bolt-on wouldn't work. However as Gutenprint is free it's worth trying to see if it's any good for you. -
I did software update, now java in Safari doesn't work.
I ran software update, now Java in Safari and Firefox doesn't work. How do I fix it?
I already tried that.
I am running OS 10.6.8.
I did a "normal" software update (under the Apple icon).. didn't update the OS to a higher level, it's still 10.6.8. But now certain websites tell me that Java is missing or not working. When I go to the Java site, they say that you can only download the newest Java for OS 7 or higher... that Java is automatically part of OS 6 and should have automatically updated when I do a Mac software update.
Java used to work. Now that I've "updated" my Mac software, it doesn't work. And there's no way to download and install Java (according to them).
It's a never ending circle with no solution.
Maybe you are looking for
-
Adding a user in Active Directory
Hi fellows, I am having a serious problem in creating a new user in active directory. i am using LDAP JNDI code. I can delete and update users attributes, but fail to create users. ctx.createSubcontext("newuser,full domain", attributes); when i speci
-
HI, CAN ANY ONE TELL ABOUT SCREEN RESOLUTION IN BDC. REGARDS. B.SREENIVASULU.
-
I ran into a curious problem trying to use Google search. Found a solution. But not certain what caused the problem. When I tried to refine a search (modify text in their search text box) the browser would not refresh on hitting return or their searc
-
Integrate BI reports in Portals
Hi, I am new to portals.I need to integrate BI reports in portals.So i need to know what are the things to install for the integration.Its very urgent.If any one knows abt this pls let me know as soon as possible. Regards, Laxmi.
-
32 or 64 bit Sparc patches for studio 12.3
I'm confused by the option for 32 or 64 bit patches, I installed Studio12.3 on an M4000 running Solaris 10U8. Why are 32 bit patches for sparc listed? I want the 64 bit patches correct?