AppleWorks 6.2.9 won't print whole database.

Is there a limit to how many pages a AppleWorks data base will print? I have a data base with 214 records and when I try to print the Epson C88+ printer will only print 63 of the 71 pages the data base contains. I can see all 71 pages when I'm in the database. The print page seems to default to "print pages 1 to 63. If I set it to "all", it still only prints 1 to 63 (you can see this in the preview). All records are made "visible". I can see the last pages, edit them, etc. When I physically change the range to 1 to 71 I immediately get an error that the number 71 is out of range and choose a number between 1 and 63. I do need a copy of the last 8 pages, but don't know how to get them to print. Any suggestions?

Hi Ron,
Certainly odd behaviour. I'm not aware of a page limit for printing.
A workaround you might try is to Select all of the records on the first 63 pages then go Organize > Hide selected. Then try printing the remaining pages.
Regards,
Barry

Similar Messages

Appleworks won't print after upgrading to 10.4

I had bought Appleworks and it was working fine and then a few months later upgraded to OS 10.4.2 Now appleworks (the installed version) won't print (I deleted the other). They are the exact same version. My printer works fine in other applications. I made sure the printer was selected in appleworks printer set up also. I also reset permissions to make sure something wasn't messed up.
Any suggestions would be appreciated.
Lori

So nobody has had this problem???

This is a problem. The new layout for apple mail in iCloud shows the body of a mail or any attachments on the right half of the screen. But it won't print just the attachment, it prints the whole email page, cutting off the bottom of the attachment.

Even if I try to 'screen shot' just the attachment, the view won't move down as I enlarge the 'screen shot' to get all of the attachment. Previously, I could "SAVE" the attachment and only the attachment would be saved. Now the whole email page including the address info from the top is saved, so when I try to print what should be an 8.5x11 attachment the bottom of it won't print because the top 2" include the email address info.
Suggestions?

That's one of the weird things.. it recognizes it maybe 10% of the time. And usually, only after I do the two-button reset. Problem is.. since it won't charge above 2%, anytime I try to do a restore or anything like that using iTunes, my device shuts off and I lose whatever progress I'd made.
So, an update... after reading through a bunch of similar complaints (there are literally 1000's of them so there's NO WAY this isn't somehow ios7 related, thanks a lot APPLE ) I decided to try a restore in recovery mode. After 3 hours and several disconnections... I ended up having to just set it up as a new iPad, as the restore did nothing. Weirdly though... as I was doing the restore in recovery mode.. I noticed I'd gotten up to a 10% charge.. higher than it's been since September, so after setting it up as a new device, I turned it off and plugged it in using the wall charger. 2 hours later and I was up to 38%. Still not great, as my iPad, before ios7 could've fully charged twice in the amount of time it took for me to now get 28% more of a charge. And that's with a fully cleaned out device.. so that really ***** and I'm now more confused than ever.
But I'm gonna leave it overnight charging and see what I come up with tomorrow. Sadly, when I paid $600 for it in February, I never expected to have to play "wait and see" with it...

Appleworks file won't print in Snow Leopard

I recently migrated apps and files from an older iMac to an iMac5,1 (late-2006 model). I use the same HP photosmart 7960 printer. When I send a file to print, one I have printed before with the old iMac, it won't print. I went onto HP's site to download a driver but during installation it says the setup assistant quit unexpectedly. I am trying to print files from Apple Works 6. I can print from Text Edit and from Mail,
Can you help? Thanks.

glaucous wrote:
Fred, I'm sorry, I mistyped about where I look for "get info" on a selected document. I do look under the File menu. It is grayed out as is "About Appleworks" and right clicking/ctrl click doesn't work.
For instance: I select (in Finder) an AW doc created in 2009. Right click doesn't work. File menu, About Appleworks grayed out. I double click to open it. Right clicking brings up usual editing menu. File menu visible but no "get info," About Appleworks says it's version AW 6.2.9. This doc doesn't preview and doesn't print. Then I change font and type size and save. This time it previews (content creator AppleWorks 6, creation date Jan. 10, 2011. AND it prints. I close it and select it again. Right click doesn't work, File menu and About Appleworks still grayed out and the "last opened" says 12/7/09.
glaucous, are you certain you are in Finder when you do this?
If you are in Finder, the Application menu (first to the right of the Apple menu) should be "Finder", and its first item should be "About Finder," not "About AppleWorks."
The only time you will see "About AppleWorks" in the Application menu is when you are 'in' AppleWorks.
It will be greyed when you have a dialogue box (for example, the Open dialogue, or the Save dialogue) open. Under this condition Hide AppleWorks and Hide Others will be the only active items in the Application menu. All items in the File menu will be greyed, as will be all items in Edit and Window menus. Help will show AppleWorks Help as an active item. And, as you note, right-clicking the file name or icon will have no effect (other than selecting the file), and double-clicking the file will open it (in the Open dialogue).
Regards,
Barry

Appleworks document won't print on my emac

I can get my emac computer to print from the internet as well as scan and print. For some reason it won't print from a basic appleworks word processing document. In the print box, I get " Unable to open the printer connection". I'm confused, I connect to print from the internet, why won't it print from appleworks. I know nothing about printer connections. I realize my computer is referred to as "vintage". It worked just fine and all of a sudden it quit printing. What did I do wrong? I NEED HELP !!! I have wedding invitations I need to send out ASAP and I am getting nervous. Thanks to anyone who gives me a quick response.

Hi p-h,
That quick post was a workaround that I thought would let you print right away.
What might cure the problem is deleting AppleWorks's preferences files. See this post by Peggy in the User Tips library for details.
Regards,
Barry

Won't print through Window XP on iMac with Bootcamp

Installed Bootcamp and Windows. I can access Internet ok, but it won't print via wireless Airport. Try to print but nothing happens. Help!

I just purchased a new G5 iMac (PowerPC) with OS 10.4.4 installed. My problem seems to mirror yours, i.e. totally erratic printing of Web pages from Safari. Printing in other apps. seems fine (AppleWorks, etc.). My HP 6100 series printer doesn't have this problem when connected to an iBook OS 10.2.8. I downloaded the most recent software version on the HP website (7.7.2) assuming that there would be a properly functioning driver in this. No dice - still unable to print from Safari. HP online support site was dismissive; worse, I paid HP for tech help which vowed the download would work. The whole experience has been disheartening. Have you been able to get anywhere? Thanks.

My Kodak AiO 3250 won't print since installing OS X Yosemite.

My Kodak AiO 3250 won't print since installing OS X Yosemite. I get error message on printer, "An unexpected error occurred. Check for problem at the printer a ..." Dialogue box ran out of space, couldn't determine the whole message. I've contacted Kodak, no response so far. Any other suggestions?

Hi guys,
This is not Apple's fault. Kodak is the one responsible for updating drivers for their new printers and from what I have heard Kodak is pulling out of the printer business and are behind on updating their drivers. This video on how to install a new printer might help and explains how sometimes old drivers can still work if you don't use air print.
-crazy

Spreadsheet: cell grid won't print.

Downloaded Leopard 10.5.1. Now Appleworks spreadsheets won't print cell grid even though it is selected in the print window. Canon iP5000 printer has latest print driver installed that IS 10.5.1 compatible. Everything else prints fine, just not the cell grid. Canon reps say it must be an Apple problem at this point. Any suggestions? Is Leopard supporting AppleWorks or not? I haven't been able to find out for sure. If it isn't, then I can live with this anomaly.

Hi Hal,
Leopard itself does not 'support' AppleWorks (or any other Carbon application). Carbon applications run in Rosetta, which is included in Leopard.
A possible workaround for the cell boundary printing problem may be to 'print' to a PDF file, then print that to paper from Preview.
Two other maintenance steps that should be done after any installation may also help:
Use Disk Utility to Repair Permissions on your hard drive, and delete AppleWorks's preferences files. See my reply to consolata in the "I can't save an AppleWorks document" thread for more on deleting prefs.
Regards,
Barry

Won't print black ink with new cartridge

I have read all advise. Black stopped printing. New genuine HP cartridges. Did partial and whole resets. Cleaned printhead. Removed all cartridges and case and cleaned well. Very gunky. Still won't print HELP ME! Have read thru all the posts and did everything

The post here may help resolve black not printing on your Offcieejt 6500, go through all the troubleshooting steps in the document referenced there and if that does not resolve the issue then try soaking the printhead.
If this does not resolve the issue you may need to replace the printhead.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

InDesign doc exported to PDF won't print

I'm experiencing issues with an exported PDF from InDesign. More specifically, when I export the InDesign doc to a PDF and try to print, I don't have any issues, nor does anyone else in my office, however some of the people that I'm sending the document to are experiencing trouble printing it. They get to 44% flattened and then the printing process slows down, and then once it reaches 50% they get a pop-up window saying that the document can't print and the whole thing stops. They can print the first page by just selecting that page, however the second page cannot be printed this way. I have re-exported the PDF several times and these folks having the issues have cleared their browser cache, re-downloaded the document, saved it to their desktop before opening, and tried renaming the document as well.
What's going on here, and what can I do or tell them to do to fix this?
Also, updating their Adobe Reader or Adobe Acrobat does not solve the problem.

Hi, I was just wondering if you got the problem resolved. I'm asking because we are experiencing kind of the same issue in our office. Our Marketing Manager is using Adobe InDesign and exports her documents to PDF. These PDFs won't print in any of our printers in the office. It spools and then gets stuck and it actually makes our HP Coloured Laser Printer throw an error (error 79) and we'll have to restart the printer due to this error. We can print other documents and other PDFs in the printer so we know it's not a printer driver issue. In fact, we have isolated the problem to only PDFs exported from InDesign. Even if we create a blank document from InDesign and export it to PDF it still won't print. Really odd. We would appreciate if you could share your solution if you were able to fix the issue. Thanks!!

Printer won't print too- need a new printer head. i want to know if you have one in stock

Hi, my printer won't print and the error message states "bad printerhead". My printer model is HP officejet d 155xi. I need to know how much it costs or would it be cheaper to buy a new printer. Still have four cartridges of ink. Please advise. Thanks.

HI,
You can find the General prices for the printheads HERE, if you only have to replace one its ok, but keep in mind that the other printhead are likely to be just as old and might break down as wel.
Say "Thanks" by clicking the Kudos Star in the post that helped you.
Although I work for HP my posts and replies are my own
Please mark the post that solves your problem as "Accepted Solution"

I have an hp photosmart c7280 all-in-one series printer won't print. error message, system problem

I have an HP Photosmart All-in-One C7280 series printer/fax/copier/scanner. I have been having issues with printing for the past few weeks. It is a wireless printer, with a jack into the wall (for fax) and it is plugged into a power source. I never used to have issues with it before, but recently, it won't print when I send a document to it to print. It will print its configuration pages, reports, etc if I select them from the Printer's menu but not when I send a doc to it to print. First it was saying it was offline, but I figured out how to override that by operating as an administrator and selecting "Use Printer Online" from the dropdown menu when I right clicked on the printer from the control panel. But now it says "Error: Printer failed to print document. System error".
Noooo clue what to do now. This is the only color printer we have so we kind of need it to work. We bought this printer off the shelf at a office store (before I started working here) and so we don't have any designated technichians to work on it. I asked the guy who services our Image Runner Copier to look at it but he had no clue what was wrong with it. Hopefully someone can help?

goestherain,
I need to know what operating system you are using to helps narrow troubleshooting a bit, what OS are you running?
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Hp deskjet 1510 series won't print

We mloved recently to la Gomera (Canarian isle) and there I bought a hp deskjet 1510. It won't print when connected to my lap top, also HP with Windows vista, although it is connected, is on, and is the default printer. I tried everything the print and scan doctor suggested (like switch off fire wall, chekc print ooler, remove and reinstall driver and software etc) and everything else I found in support from HP. it still does not print. When connected to our other lap top, also HP but with windows 7, it works fine. The only thing I managed to print is a diagnostic page but it give only numbers and letters like SN = CN39a19mmp05yr 21 PG =81 12 PER = -5yr 22 FB = 0/0 etc. Tjat does nog help me :-(. does anybody know how to solve this?
This question was solved.
View Solution.

Hello,
Please try the below mentioned steps..
Click START > Device and Printer > Add a Printer > Add a local printer >
( if the printer is connected with USB )
Select "Use Existing Port " then Virtual USB from drop down , Click NEXT, in the Manufacturing list , select HP / Hewlett packard, and from the right pane , select Deskjet 6980 and complete the wizard
Regards,
Jabzi
Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
Click "Accept as Solution" if it solved your problem, so others can find it.
Although I am an HP employee, I am speaking for myself and not for HP.

Deskjet 3050 Won't Print Wirelessly

Hi there,
My new all in one 3050 won't print for me. It is "Offline" in the network page. I feel I have explored every avenue and it will still not print. The wireless network configuration page I printed says everything passed. The home network disagnostic tool says "software missing" after i click test connection. The print diagnostic tool fails on connectivity everytime. I can connect to the printer ip 192.168.1.3 in the browser 95% of the time but not always. My router is a Zyxel P-660HW-T1 v3. I'm really close to tears with frustration, I'm quite computer and networking savvy but I cannot fix this. please help, I'd be eternally grateful.
Kind Regards,
Larry.

Hello dkkenny1,
Are you running Windows on your computer? If so, I recommend running the HP Print and Scan Doctor. This tool provides a quick and easy way to diagnose and resolve many printing, scanning, and connectivity problems. Click the link below for details on how to download and run this tool:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03286146&lc=en&cc=us&dlc=en&product=4066452
If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

HP Officejet Pro 8100 Everything fine; Just won't print

HP Officejet Pro 8100 working on a Windows 8 PC
I like this printer, had it for a few months, worked fine at the start. For more than a week now, it just won't print. Troubleshooting reveals no problems with set-up or anyhing. No error messages. Files go to the printer, listed on the queu, but nothing happens thereafter. Help!

This solution was created to address the issue you've described.
Print jobs stuck in queue / No response
I am an HP employee.

AppleWorks 6.2.9 won't print whole database.

Similar Messages

Maybe you are looking for