Applying a debit memo
Hi Gurus
i know that to reverse a credit memo,you need to apply the debit memo to the creidt memo.
can someone please assist on the process of applying the credit memo to the invoice and subcequently applying the debit memo to the invoice.
thank you in advance
Hi Octavio
Thanks again. Allow me to illustrate the work-around I have in mind with an example:
Invoice1 $100 - Invoice payable to supplier by OU1
Debit Memo1 ( $20) - Debit memo (or credit memo) deductible from supplier payments in OU2
Net Payable to supplier $80
Step 1
Make a payment of $20 invoice1 from a dummy bank account in OU1:
Dr Supplier liability $20
Cr Dummy Bank Account $20
Step 2
Make a payment of remaining $80 to supplier.
Step 3
Cancel debit memo1 in OU2:
Dr Expense Account $20
Cr Supplier Liability $20
Step 4
Transfer of dummy payment to OU2
Dr Dummy Bank Account $20
Cr Expense Account $20
The debit memo is therefore fully accounted for, but this has required 3 additional steps.
Thanks.
Majid Al-Bahry
Similar Messages
-
Apply a debit memo in one OU to an invoice in a different OU
Hi All
I have a requirement in AP where I need to apply a debit memo in one operating unit to an invoice in another operating unit (same supplier). Does this functionality exist in AP? If not, what is a possible work around?
Thank you in advance!
Majid Al-BahryHi Octavio
Thanks again. Allow me to illustrate the work-around I have in mind with an example:
Invoice1 $100 - Invoice payable to supplier by OU1
Debit Memo1 ( $20) - Debit memo (or credit memo) deductible from supplier payments in OU2
Net Payable to supplier $80
Step 1
Make a payment of $20 invoice1 from a dummy bank account in OU1:
Dr Supplier liability $20
Cr Dummy Bank Account $20
Step 2
Make a payment of remaining $80 to supplier.
Step 3
Cancel debit memo1 in OU2:
Dr Expense Account $20
Cr Supplier Liability $20
Step 4
Transfer of dummy payment to OU2
Dr Dummy Bank Account $20
Cr Expense Account $20
The debit memo is therefore fully accounted for, but this has required 3 additional steps.
Thanks.
Majid Al-Bahry -
AR: Apply a debit memo to a credit memo - debit memo not showing on LOV
Hello,
We are trying to apply a credit memo to a debit memo, but the debit memo does not show on the list of values on the Application form. We are doing as follows:
1. Entered credit memo and completed
2. Entered debit memo and completed (same customer that credit memo)
NOTE: Both transaction types are defined as "Not Post to GL" and "Not Open Receivable"
3. Query credit memo on transactions
4. On the credit memo, go to Actions - Applications
5. Hit the list of values on Apply To field
6. Our debit memo does not show on that lov. (but another debit memo - defined as Post to GL and Open Receivable as Yes and an invoice are showing)
So, the basic questions are:
- The debit memo transaction type defined as Post to GL and Open Receivable set to No is causing this situation?
- Is this standard functionality or are we missing some steps?
By the way, we are on 11.5.10.2
Thanks in advance for your help.
Regards.
EnriqueHi Octavio
Thanks again. Allow me to illustrate the work-around I have in mind with an example:
Invoice1 $100 - Invoice payable to supplier by OU1
Debit Memo1 ( $20) - Debit memo (or credit memo) deductible from supplier payments in OU2
Net Payable to supplier $80
Step 1
Make a payment of $20 invoice1 from a dummy bank account in OU1:
Dr Supplier liability $20
Cr Dummy Bank Account $20
Step 2
Make a payment of remaining $80 to supplier.
Step 3
Cancel debit memo1 in OU2:
Dr Expense Account $20
Cr Supplier Liability $20
Step 4
Transfer of dummy payment to OU2
Dr Dummy Bank Account $20
Cr Expense Account $20
The debit memo is therefore fully accounted for, but this has required 3 additional steps.
Thanks.
Majid Al-Bahry -
Applying Credit or Debit memo to the Invoice in AP
Plz guide me how to apply Credit or Debit memo to an Invoice in Accounts Payables.
Hi
In the Invoice window Enter Debit or Credit Memo, Form the Match Button ,Select "Invoice"
Select Match
In find Invoice Match window Enter Search Creteria for Invoice
If you want to see a invoice matched to purchase order enter the purchase order mumber
Then Match
And while making Payment you have to select that Debit or Credit memo then only it is removed form the Supplier
Thanks
Sunil -
hi,
1) credit memo request - After create invoice in vf01, then if credit memo needed, must create credit memo request in va01 then only can create credit memo in fb75?
2) debit memo request - After create invoice in vf01, then if debit memo
needed, must create debit memo request in va01 then only can create debit memo in fb70?
3) credit/debit memo can only be created after credit/debit memo request is created?
4) if credit/debit memo not created in fb75/fb70, where in sd can create?
5) credit/debit memo request done via which tcode if not va01.
thanksHi Eliana,
1. A transaction that reduces Amounts Receivable from a customer is a credit memo. For eg. The customer could return damaged goods. A debit memo is a transaction that reduces Amounts Payable to a vendor because, you send damaged goods back to your vendor.
2. Credit memo request is a sales document used in complaints processing to request a credit memo for a customer. If the price calculated for the customer is too high, for example, because the wrong scale prices were used or a discount was forgotten, you can create a credit memo request. The credit memo request is blocked for further processing so that it can be checked. If the request is approved, you can remove the block. The system uses the credit memo request to create a credit memo.
You can use credit memos in Sales and Distribution (SD) for assigning credit memo requests to the open invoices and in Financial Accounting (FI) for assigning credit memos and payments to the open invoices and carry out clearing with them. If you use both Financial Accounting (FI) and Sales and Distribution (SD), there is a 1:1 relationship between the credit memo request and the credit memo item posted in Financial Accounting (FI). As soon as you bill the credit memo request together with other sales orders, or distribute the items of one credit memo request to several billing documents, the assignment is no longer valid and the system will not process it.
For credit memos, credit memo requests, and payments, you have the following assignment options:
- Assignment to a single invoice
- Assignment of a partial amount to an invoice
- Assignment to several invoices
When you post credit memos, the payment programme processes them automatically. If the credit memo is specifically related to a particular open invoice item, the payment program automatically attempts to offset the credit memo against the open item. If it is not possible to completely offset the credit memo against an invoice, you can post a debit memo to the vendor, who is to reimburse the amount. Then you can apply a multilevel dunning program.
3. Debit memo request is a sales document used in complaints processing to request a debit memo for a customer. If the prices calculated for the customer were too low, for example, calculated with the wrong scaled prices, you can create a debit memo request. The debit memo request can be blocked so that it can be checked. When it has been approved, you can remove the block. It is like a standard order. The system uses the debit memo request to create a debit memo.
4. As mentioned above, creating a credit or debit memo request enables you to create credit or debit memos based on a complaint. For this first create a sales document with the order type for a credit or debit memo request. You can create the debit or credit memo requests in the following ways:
Without reference to an order
With reference to an existing order
Here you enter which order the complaint refers to.
With reference to an invoice
Here you enter which invoice the complaint refers to.
In all cases, you specify the value or quantity that should be in the credit or debit memo
5. You can block the credit or debit memo request from being billed in Customizing. Go to Sales -> Sales Documents -> Sales document header -> Define sales document type and select the billing block field in the billing section. This request can later be reviewed along with similar ones, - if necessary, by another department. The request for a credit or debit memo can then be approved or rejected.
Credit memo and debit memo is created used the T.Code VF01, in which we have to choose the billing type as Credit Memo or Debit Memo.
Credit Memo Request or Debit Memo request are created using T.Code VA01, in which we have to select document type as G2 or L2.
Hope this gives you some idea.
REWARD IF HELPFUL.
Regards,
Praveen -
Cancel of debit Memo, Don't want debit memo request in VF04
Senario:
1.Cerated debit memo request.
2. Created debit memo and passed to accounting.
3.Cancelled debit memo and passed to accounting.
4. Debit memo request is in open status and appears in VF04.
Now what I done is I applied reason of rejection to item in debit memo request to make the status complete--> Not happened.
Tried to delete the debit memo request but received Information: Not able to delete the document as subsequent document is present.
Kindly help.
HrishikeshHi Friends,
I did manage to remove the debit memo request from VF04 and for that I did following things the debit memo request:-
1. Added Item Usage in DMR (debit memo request)
2. Added Reason for rejection
3. Added order reason
Hope this will help you all if you face simillar kind of problem.
Regards,
Hrishi -
Can some one kindly explain the img config step by step and how to check this setting in easy access.
Thankyou in advance
Rewards are assured
Best regards,
R.SrinivasanREFER BELOW REWARD IF HELPS
Debit note and Credit note? What is the purpose? How we create?
1. A transaction that reduces Amounts Receivable from a customer is a credit memo. For eg. The customer could return damaged goods. A debit memo is a transaction that reduces Amounts Payable to a vendor because, you send damaged goods back to your vendor.
2. Credit memo request is a sales document used in complaints processing to request a credit memo for a customer. If the price calculated for the customer is too high, for example, because the wrong scale prices were used or a discount was forgotten, you can create a credit memo request. The credit memo request is blocked for further processing so that it can be checked. If the request is approved, you can remove the block. The system uses the credit memo request to create a credit memo.
You can use credit memos in Sales and Distribution (SD) for assigning credit memo requests to the open invoices and in Financial Accounting (FI) for assigning credit memos and payments to the open invoices and carry out clearing with them. If you use both Financial Accounting (FI) and Sales and Distribution (SD), there is a 1:1 relationship between the credit memo request and the credit memo item posted in Financial Accounting (FI). As soon as you bill the credit memo request together with other sales orders, or distribute the items of one credit memo request to several billing documents, the assignment is no longer valid and the system will not process it.
For credit memos, credit memo requests, and payments, you have the following assignment options:
- Assignment to a single invoice
- Assignment of a partial amount to an invoice
- Assignment to several invoices
When you post credit memos, the payment programme processes them automatically. If the credit memo is specifically related to a particular open invoice item, the payment program automatically attempts to offset the credit memo against the open item. If it is not possible to completely offset the credit memo against an invoice, you can post a debit memo to the vendor, who is to reimburse the amount. Then you can apply a multilevel dunning program.
3. Debit memo request is a sales document used in complaints processing to request a debit memo for a customer. If the prices calculated for the customer were too low, for example, calculated with the wrong scaled prices, you can create a debit memo request. The debit memo request can be blocked so that it can be checked. When it has been approved, you can remove the block. It is like a standard order. The system uses the debit memo request to create a debit memo.
4. As mentioned above, creating a credit or debit memo request enables you to create credit or debit memos based on a complaint. For this first create a sales document with the order type for a credit or debit memo request. You can create the debit or credit memo requests in the following ways:
Without reference to an order
With reference to an existing order
Here you enter which order the complaint refers to.
With reference to an invoice
Here you enter which invoice the complaint refers to.
In all cases, you specify the value or quantity that should be in the credit or debit memo
5. You can block the credit or debit memo request from being billed in Customizing. Go to Sales -> Sales Documents -> Sales document header -> Define sales document type and select the billing block field in the billing section. This request can later be reviewed along with similar ones, - if necessary, by another department. The request for a credit or debit memo can then be approved or rejected. -
Not able to edit the Debit memo request after cancelling Billing document
Hi,
This is a process in SD/Customer service.The issue is even after cancelling the billing document we are not able to edit the item details in debit memo request..Pls suggest how we can edit the item details after cancelling the billing document
Best Regards
JayHi Jay,
Yes, the whole sales document could not be deleted as well.
Sorry for the misleading answer.
As per the long text of error V1006, the document cannot be completely
deleted because further processing has already taken place. Even though
you have cancelled the subsequent documents, if you refer to the
document flow, the subsequent documents might have already been created
The cancellation of these does not delete the request.
Please have a look at table VBFA in transaction SE16 and you can see
that the subsequence documents are still displayed.
What you can do is to enter a reason of rejection for all items to
prevent further processing of the request.
Please refer to Note 147028, you don't need to apply
this note, please refer to part of "NOTE:...".This is a restriction
of the system.
For order-related billing, it is not possible to delete the sales
document, even if the subsequent invoice has been cancelled.
You have to reject the items.
Cheers,
Alex -
Posting Debit Memo (SO) through IDOC throwing V1213 error msg.
HI Guys,
Debit Memo has been created using the idoc.
Getting the error status in IDOC - 51 - Message V1213 - Condition ZR00 is not allowed as header condition
I am using custom BAPI using SD_SALESDOCUMENT_CREATE FM inside it.
The error is thorwn by PRICING_CHECK FM.
Ironically the idoc is posting successfully when there is only one item, if its more than one.. throwing error V1213.
When I debug it, PRICING_CHECK FM is the culprit.
PRICING_CHECK FM is called 2 times, one per item. During first call the item No. komp-kposn = 0010,
in 2nd call komp-kposn = 0000. thats why its throwing this error in the first place.
But why the item value is 0, during 2nd call.. no idea.. !
Interestingly VBKD table stores the item 0010 and 0000 in its entries.. when I force it to posting successfully in debug mode.
Entries in VBAP are normal.
But when I create the debit memo manually with 2 items, its posting without an error. its accepting condition type ZR00.
Now I turn on the header condition in V/06 for testing purpose only. Now its posting for more than one item..
But I can't turn it on permanantly, as its not recommended by business.
but its posting coreectly in other system where header condition is turned off. !!
Thanx for Ur time..
CheersIn SD/LE tables, posnr (item) no. 0 refers to the header. So, in VBKD, if you have 0000 and 0010, the SO has one and only one item. In your case, obviously, ZR00 is not intended to be a header condition and can only be applied at the item level... and the only item to which the condition can be applied is 0010.
-
in case of inter company billing is it possible to create both debit/credit memo....?if not why...
hi
1. A transaction that reduces Amounts Receivable from a customer is a credit memo. For eg. The customer could return damaged goods. A debit memo is a transaction that reduces Amounts Payable to a vendor because, you send damaged goods back to your vendor.
2. Credit memo request is a sales document used in complaints processing to request a credit memo for a customer. If the price calculated for the customer is too high, for example, because the wrong scale prices were used or a discount was forgotten, you can create a credit memo request. The credit memo request is blocked for further processing so that it can be checked. If the request is approved, you can remove the block. The system uses the credit memo request to create a credit memo.
You can use credit memos in Sales and Distribution (SD) for assigning credit memo requests to the open invoices and in Financial Accounting (FI) for assigning credit memos and payments to the open invoices and carry out clearing with them. If you use both Financial Accounting (FI) and Sales and Distribution (SD), there is a 1:1 relationship between the credit memo request and the credit memo item posted in Financial Accounting (FI). As soon as you bill the credit memo request together with other sales orders, or distribute the items of one credit memo request to several billing documents, the assignment is no longer valid and the system will not process it.
For credit memos, credit memo requests, and payments, you have the following assignment options:
- Assignment to a single invoice
- Assignment of a partial amount to an invoice
- Assignment to several invoices
When you post credit memos, the payment programme processes them automatically. If the credit memo is specifically related to a particular open invoice item, the payment program automatically attempts to offset the credit memo against the open item. If it is not possible to completely offset the credit memo against an invoice, you can post a debit memo to the vendor, who is to reimburse the amount. Then you can apply a multilevel dunning program.
3. Debit memo request is a sales document used in complaints processing to request a debit memo for a customer. If the prices calculated for the customer were too low, for example, calculated with the wrong scaled prices, you can create a debit memo request. The debit memo request can be blocked so that it can be checked. When it has been approved, you can remove the block. It is like a standard order. The system uses the debit memo request to create a debit memo.
4. As mentioned above, creating a credit or debit memo request enables you to create credit or debit memos based on a complaint. For this first create a sales document with the order type for a credit or debit memo request. You can create the debit or credit memo requests in the following ways:
Without reference to an order
With reference to an existing order
Here you enter which order the complaint refers to.
With reference to an invoice
Here you enter which invoice the complaint refers to.
In all cases, you specify the value or quantity that should be in the credit or debit memo
5. You can block the credit or debit memo request from being billed in Customizing. Go to Sales -> Sales Documents -> Sales document header -> Define sales document type and select the billing block field in the billing section. This request can later be reviewed along with similar ones, - if necessary, by another department. The request for a credit or debit memo can then be approved or rejected.
nagesh -
Excise invoice creation for Debit Memo or Credit Memo
Dear All,
I have to create Excise Invoice J1IIN with reference to Debit Memo in Differential Invoice Senario.
When i goto J1IIN it shows Customization for Document is missing in table Billing Reference type.
How to create Excise invoice for Order related billing.Plz solve my problem.
Award Pts for useful answers.
Thx & Regards,
PankajCIN Configuration for Excise Invoices in case of RETURNs
Basically CIN is divided in to two types:
1. TAXINJ - Is a Routine Based that is used in the condition types. it will work on the logic what ever is there in the Routine.
2. TAXINN: - Is a condition Record based. Means we have to create condition records for each and every condition type that you are going to use in the Pricing Procedure.
Since Version 4.7 this TAXINN came into picture and start using this.
And one of the important points is since 4.6 c CIN comes a separate package. But after introduction of 4.7 Version, CIN is coming the SAP Package itself and even in the Customer Master Record also we will find the CIN Icon.
Basically 4 types of Pricing Procedures are used in CIN and are as follows:
1.JDEPOT - Depot Sales
2.JEXPOR - Export Sales
3.JFACT - Factory Sales
4.JSTKTR - Stock Transfer
Country Version India comes with four pricing procedures as follows:
JINFAC (Sales from manufacturing plants)
JINEXP (Export sales)
JINDEP (Sales from depots)
JINSTK (Stock transfers
CIN:
IMG > Logistics - General > Tax on Goods Movement > India > Basic Settings >
Maintain Excise Registrations
Use
In this IMG activity, you maintain the data relating to your excise registrations.
Activities
enter each of your excise registrations, specifying a four-character code for each
Excise Registration IDs
In this activity, you maintain excise registration IDs. You create one ID for each of your business's excise registrations.
Activities
For each excise registration in your business create a registration ID, and state:
Which taxes the registration covers (additional excise duty, special excise duty, and cess)
Fields for any taxes that are not covered will be hidden in transactions involving excise duty.
The maximum number of items to be printed on each excise invoice
Whether you are allowed partial CENVAT credits
Maintain Registration ID NUMBER, Excise code number, excise registration number
Excise Registration Number
A number assigned to each premises or location that has registered as a manufacturer with the excise authorities.
Every entity with an excise registration number is required to keep its own excise books.
ECC Number
Specifies the organization's ECC number.
Excise Registration Number
A number assigned to each premises or location that has registered as a manufacturer with the excise authorities.
Every entity with an excise registration number is required to keep its own excise books.
Excise range: Specifies the excise range in whose area the excise registration is located.
Excise Division
Specifies the excise division in whose area the excise registration is located.
Excise Collectorate
The code of the excise collectorate in whose area the excise registration is located.
Indicator for confirming AED usage
Additional Excise duty Percentage. These are leviable under the additional duties of excise act. These duties are in addition to basic excise duty and special excise duty.
Example
Additional Excise duty is leviable in case of textile products, tobacco and sugar.
Similarly for SED CESS
Number of Items in Excise Invoice
Shows the maximum number of line items that the authorities allow per excise invoice.
Dependencies
This information is used when you create an excise invoice in Sales and Distribution (SD) for factory sales and for other movements.
This information is used to split the transfer postings' items into multiple subcontracting challans.
Excise register set description
Description of the excise registers set.
Partial CENVAT Credit
Indicates that the excise registration ID is allowed to credit only a portion of its input excise duty to its CENVAT account.
Dependencies
When you post a goods receipt, the system splits the input excise duty on the material into its deductible and nondeductible amounts. It posts the deductible duty to the appropriate CENVAT account, and adds the nondeductible duty to the material value.
This information is also shown when you post the vendor's excise invoice.
Maintain Company Code Settings
Use
In this IMG activity, you maintain the data relating to your company codes.
Document Type for CENVAT Postings
It controls, which document type the system uses when making CENVAT postings in Financial Accounting (FI). Here ED is document type for cenvat posting.
Indicator for providing debit account overwriting
Debit Account Overwrite Indicator. X - Indicates debit accounts can be overwritten. Use In excise journal voucher transaction. It provides the flexibility to the user to enter the debit account of his choice depending on the nature of transaction.
Automatic balance Indicator
Excise year start month
The calendar month marking the beginning of the excise year
Use
this start month represents the month for the start of the excise invoice number range. The month 04 is entered here indicating April of the calendar year as the start month for excise invoices. Any change by the Excise authorities regarding start month should be taken care of by an entry in this field and initialization.
Excise invoice selection procedure
Excise invoice selection type. To indicate the method opted by the company for selecting the excise invoice. It can be either earliest or latest invoices that were received.
Number of excise invoices to be selected
indicates the number of excise invoices that needs to be selected in the excise invoice selection.
Days to be considered for excise invoice selection
Number of days from document date for excise invoice selection.
Example
If the value of this field is 20 and today is 28-03-97. The excise
invoice selection will show the related invoices only for the
period 08-03-97 to 28-03-97.
Document type for TDS FI posting
Financial accounting document type for TDS posting.
Document type for FI posting on Utilization
Financial accounting document type for TDS posting.
Indicator for item level excise duty round off
This indicator is to be used for deciding whether Item level excise duty amount rounding off is required during procurement cycle. If marked 'X' then the excise duty amount will be rounded off to the nearest rupee at the Purchase order level. This will not round off the CENVAT credit to be taken. If the duty amount is less than one rupee then no rounding is done
Rounding off of Excise duty for outgoing excise invoice
You can round off the Excise amount to be paid during an outgoing Excise invoice by marking this indicator as 'X'. The rounding is done at the item level for each item where the amount is greater than 1 Rupee.
Immediate Credit on Capital Goods
Instructs the system, when you verify a goods receipt for capital goods, to immediately post half of the input excise duty to the appropriate CENVAT accounts.
The rest is posted the CENVAT on hold account, for use in the following year.
CVD Clearing Account
Specifies which G/L account the system credits when you take a CENVAT credit on countervailing duty in the Incoming Excise Invoices transaction.
Exchange rate type
Key representing a type of exchange rate in the system.
Use
You enter the exchange rate type to store different exchange rates.
Example
You can use the exchange rate type to define a buying rate, selling rate, or average rate for translating foreign currency amounts. You can use the average rate for the currency translation, and the bank buying and selling rates for valuation of foreign currency amounts.
Exchange rate type to be used for Export excise duty converts
When you are creating an Excise invoice for export sales then the exchange rate for duty calculation will be picked up using this Exchange rate type.
Maintain Plant Settings
Use
In this IMG activity, you maintain excise information relating to your plants.
Plant Settings
In this activity, you maintain excise information relating to your plants.
Activities
For each plant:
Specify whether it is a manufacturing site or a depot.
Assign it an excise registration ID.
You can assign the same ID to more than one plant, if required.
Depot
indicates that the plant in question is a depot.
Dependencies
Depots are required to prepare register RG 23D, and follow different procedures for goods receipt and invoice generation.
Number of goods receipt per excise invoice.
Multiple GR for one excise invoice, Single credit
Multiple GR for one excise invoice, multiple credits
Maintain Excise Groups
Use
In this IMG activity, you define your excise groups. For each excise group, you can also control how various excise invoice transactions will work.
Excise Groups
In this activity, you define excise groups. An excise group allows you to maintain a separate set of excise registers and excise accounts. The RG 23A, RG 23C and PLA serial numbers are created for an excise group.
Recommendation
Under normal circumstances, excise authorities require every business to maintain only one set of excise registers and one set of accounts. But through exemption from the authorities, multiple books can be maintained.
If your company has only one set of excise registers, then you need to maintain only one excise group.
Activities
1. Create one excise group for each set of registers that you need to keep.
1. Assign the excise groups to plants.
2. Maintain whether this Excise group is for a depot or not.
3. If you receive only one consignment for an Excise challan then you can leave GR's per EI as blank. If you receive multiple GR's for a given Excise challan and would like to avail multiple credit mark the GRs per EI as 'Multiple GR's for one excise invoice, multiple credit'. Alternatively if you want to avail the credit only after all the goods receipts have been made mark it as ' Multiple GR for one excise invoice, single credit'.
4. If you want to automatically create Excise invoice during Sales cycle at the time of billing the tick the indicator 'Create EI'
5. During depot sales if you do not want to do RG23D selection and posting separately and would like to complete RG23D selection in one step mark the indicator 'RG23D Auto post'. This will post the selected records into RG23D automatically. You cannot cancel the selection later.
6. If the indicator 'Default GR qty' is marked system will default the Excise challan quantity on to the Goods receipt if the Excise invoice number is given in the pop-up.
7. If the indicator 'Folio no creates' is marked system will generate Folio numbers for RG23D during receipt of excise invoice into depot.
8. 'Automatic posting' when ticked will post the Excise invoice other movements automatically along with creation in single step.
9. 'Create Part1 for Block Stock' when marked will create a Part1 during the receipt of material into Blocked stock.
10. 'Create Part1 for STO' when marked will create a Part1 during the receipt of material through inter plant transfers.
11. 'Create Part1 for consumption stock' when marked will create a Part1 during the receipt of material into consumption stock.
Excise Group
Governs which set of excise registers a business transaction will be included in.
Following is the relation between excise group, plant and registration.
Dependencies
In define excise groups in Customizing.
Then, in transactions involving excise duty, for example, when you post a vendor's excise invoice, you specify which excise group you are using. This information tells the system which G/L accounts to post the excise to.
At the end of the period, when you come to prepare your excise registers, you create different sets for each excise group.
Indicates that the plant in question is a depot.
Dependencies
Depots are required to prepare register RG 23D, and follow different procedures for goods receipt and invoice generation.
GR Per Excise Invoice
Multiple GR for one excise invoice , Multiple credit
Multiple GR for one excise invoice , Single Credit
Create Excise Invoice Automatically
Instructs the system to automatically create a Sales and Distribution (SD) excise invoice immediately you create a commercial invoice or a pro forma invoice.
The excise invoice is created in the background.
Dependencies
If you want to make use of this function, you must also define the default plant, excise group, and series groups in Customizing for Sales and Distribution (SD), by choosing Excise Group - Series Group Determination.
RG23D Sales Creation and posting option
RG23D Automatic Option if selected will create Depot excise invoice by posting the selection of excise invoices in single step.
If this is not selected then you need to separately do RG23D selection followed by PGI and then RG23D verification and posting.
If you need automatic posting of RG23D selection then the Post Goods Issue should have been completed before running RG23D selection.
Default excise qty in GR
If this indicator is ticked then while doing Goods Receipt using 'MB01' system will default the excise invoice quantity on to the Goods receipt document.
Folio number for depo
Posting
If this indicator is marked then while creating Excise invoice for other movements system automatically does the Verify and Post. You need not separately Post the excise invoice
Also we can set indicator for creation of part 1 for:
Blocked stock
Stock transport order
Consignment stock
Maintain Series Groups
Use
In this IMG activity, you define the different excise series groups within your company. Series groups allow you to maintain multiple number ranges for the outgoing excise documents.
Based on excise regulations and exemptions from the authorities you can maintain multiple number series for outgoing documents. But each of these series has to be declared to the excise authorities.
Activities
Define excise series groups based on type of outgoing document
Assign series group to excise registration ID
If no financial postings are required for an Excise invoice in this seris group then you tick the 'No utilization' indicator.
If the CENVAT has to be paid immediately and you need not wait for the Fort nightly payment then mark the 'Immediate Utilization' indicator.
Example
You could define two series groups, group 001 for excise invoices, and group 002 for 57 F4 documents.
No account postings for CENVAT in sales cycle
No utilization Flag
If you do not need any CENVAT utilization for an excise invoice but would like to just generate an excise invoice then you need to mark this indicator.
IF the flag is checked then system will create an Excise invoice in the given Series group but there will not be any account postings or Part2 postings.
Immediate Utilization of CENVAT
Specifies that when you create an excise invoice, the system immediately pays the amount from CENVAT and creates the Part II entry. Such invoices will not be listed for fortnightly utilization.
If you have both fortnightly and immediate utilization for the same excise group, the account determination within CIN IMG should point to the ED interim account.
Account determination for immediate payment will be done exactly the same as being done for fortnightly utilization program.
Maintain Excise Duty Indicators
Use
In this IMG activity; you maintain the excise duty indicators.
IMG > Logistics - General > Tax On Goods Movement > India > Basic Settings > Determination of Excise Duty >
Select Tax Calculation Procedure
Use
In this IMG activity, you specify which tax procedure you want to use for determining excise duties and sales taxes on input materials in India.
If you use condition-based excise determination, use a copy of the tax procedure TAXINN.
If you use formula-based excise determination, use a copy of the tax procedure TAXINJ.
This tax procedure also supports condition-based excise determination, so that you can work with both concurrently.
We strongly recommend that new customers use condition-based excise determination. Note that once you have started using a tax procedure, you cannot switch to another one, otherwise you will not be able to display old documents.
Maintain Excise Defaults
Use
In this IMG activity, you define which tax procedure and pricing condition types are used in calculating excise taxes using formula-based excise determination.
Activities
If you use condition-based excise determination, fill out the CVD cond. field and leave all the others blank.
If you use formula-based excise determination, fill out all of the fields as follows:
Enter the tax procedure and the pricing conditions that are relevant for excise tax processing.
Specify the purchasing and sales conditions types used for basic excise duty, additional excise duty, special excise duty, and cess.
Specify the conditions in the sales order that are used for excise rates.
Specify the countervailing duty condition type used for import purchase orders.
See also
SAP Library -> Logistics -> Country Versions -> Asia-Pacific -> India -> Materials Management (MM) -> Condition-Based Excise Determination and -> Formula-Based Excise Determination.
IMG > Logistics - General > Tax On Goods Movement > India > Basic Settings > Determination of Excise Duty >
Condition-Based Excise Determination
Use
When you enter a purchasing document, for example, a purchase order, the R/3 System automatically calculates the applicable excise duties using the condition technique.
Features
The standard system comes with two tax calculation procedures. TAXINN is only supports condition-based excise determination, whereas TAXINJ supports condition-based excise determination and formula-based excise determination. Both tax procedures contain condition types that cover all of the excise duties and sales taxes applicable.
Since the exact rates of excise duty can vary on a large number of factors, such as which vendor you purchase a material from, or which chapter ID the vendor stocks the material under, you create condition records for every sort of excise duty.
When you come to enter a purchasing document, the system applies the excise duty at the rates you have entered in the condition records.
Activities
Customizing
IndiaMake for Logistics General, by choosing Taxes on Goodsthe settings in Customizing Basic Excise Duties Using Condition Technique and Movements Account Settings Determination.
These activities include one activity where you define a tax code for condition-based excise determination.
Master Data
Create condition records for all excise duties that apply, and enter the tax code for condition-based excise determination in each.
Day-to-Day Activities
When you enter a purchase order or other purchasing document, enter the tax code for condition-based excise determination in each line item. The system then calculates the excise duties using the condition records you have created.
When the ordered materials arrive, you post the goods receipt and the excise invoice. The system posts the excise duty to the appropriate accounts for deductible input taxes when you enter the excise invoice.
Creating Condition Records for Excise Duty
1. In the command field, enter FV11 and choose .
2. Enter the condition type that you want to create a condition record for and choose .
The Key Combination dialog box appears.
3. Select the combination of objects that you want to create the condition record for.
On the dialog box, Control Code means "chapter ID."
So, for example, to create a condition record for a tax that applies to a combination of country, plant, and chapter ID, select Country/Plant/Control Code.
4. Choose.
5. Enter data as required.
In the Tax Code field, enter the dummy tax code that you have defined.
6. Save the condition record.
Formula-Based Excise Determination
Use
When you execute a business transaction involving materials that are subject to excise duty, the system automatically calculates the duty for you.
Prerequisites
In order for the system to be able to determine which rate of excise duty to apply, you must have maintained all the data on the Maintenance screen, which you can MasterExcise Rate access from the SAP Easy Access screen by choosing Indirect Taxes Excise Rate Maintenance.Data
You maintain the following types of data:
Plant master data
You assign each of your plants an excise duty indicator. You can use the same indicator for all the plants with the same excise status from a legal point of view, such as all those that are in an exempt zone.
See also the information about manufacturers that are only entitled to deduct a certain portion of the duty (see Partial CENVAT Credit).
Vendor master data
For each of your vendors with the same excise status from a legal perspective, you define an excise duty indicator. You must also specify the vendor type for example, whether the vendor is a manufacturer, a depot, or a first-stage dealer. You must also stipulate if the vendor qualifies as a small-scale industry.
For each permutation of plant indicator and vendor indicator, you then create a final excise duty indicator.
Customer master data
similarly, you assign the same excise duty indicator to each of your customers that share the same legal excise status.
Again, for each permutation of plant indicator and customer indicator, you then create a final excise duty indicator.
Material master data
each material is assigned a chapter ID.
Excise tax rate
For every chapter ID and final excise duty indicator, you maintain the rate of excise duty.
If your business only qualifies for partial CENVAT credit, you must customize your system accordingly.
Activities
Let us consider an example to illustrate how the system determines which rate of excise duty to apply to a material. Assume you are posting a sale of ball bearings to a customer. The system automatically determines the rate of excise duty as follows:
1. Looks up the customer master data to see what status you have assigned the customer.
Let's assume you've assigned the customer status 3.
2. Looks up the plant master data to see what status you have assigned the plant.
Similarly, your plant has status 2.
3. The system looks up the table under Excise Indicator for Plant and Customer to see what the final excise duty indictor is for customer status 3 and plant status 2: It is 7.
4. The system determines the chapter ID of the ball bearing for the plant.
Lets assume the chapter ID at plant for the ball bearings is 1000.01.
5. Finally, the system looks up the table under Excise Tax Rate to see what rate of duty applies to chapter ID 1000.01 under status 7.
Define Tax Code for Purchasing Documents
Use: In this IMG activity, you define a tax code for the purposes of calculating excise duty when you enter purchasing documents.
Only carry out this activity if you use condition-based excise determination.
Activities: Create a new tax code, and set the tax code type to V (input tax). Do not make any other settings for it.
Assign Tax Code to Company Codes
Use
In this IMG activity, assign the tax code for purchasing documents to the company codes where it will be used.
Only carry out this activity if you use condition-based excise determination.
Classify Condition Types
Use
In this IMG activity, you specify which condition types you use for which sort of tax. Note that this only applies to condition types that you use with the new excise determination method.
The system uses this information when you create a document from another one. For example, when you enter an incoming excise invoice from a purchase order, or when you create an outgoing excise invoice from a sales order, the system determines the various excise duties in the excise invoice using the information that you have entered here.
In addition, when you create a purchasing document, the system only uses the condition types that you enter here.
For taxes on purchases, use the condition types contained in the tax procedure.
For taxes on sales, use the condition types contained in the pricing procedures.
Standard settings
The standard system comes with sample settings for the tax calculation procedures and pricing procedures.
Use these settings as a basis for your own.
IMG > Logistics - General > Tax on Goods Movement > India > Account Determination
Define G/L Accounts for Taxes
Use
In this IMG activity, you specify which G/L accounts you will use to record which taxes.
Requirements
you have set up G/L accounts for each of the processing keys listed below.
Activities
Assign an account to each of the following posting keys. The accounts for VS1, VS2, and VS3 are used as clearing accounts during excise invoice verification.
VS1 (basic excise duty)
VS2 (additional excise duty)
VS3 (special excise duty)
VS5 (sales tax setoff)
MWS (central sales tax)
MW3 (local sales tax)
ESA (service tax)
ESE (service tax expense)
Specify Excise Accounts per Excise Transaction
Use
In this IMG activity, you specify which excise accounts (for excise duty and CENVAT) are to be posted to for the various transaction types. Enter all the accounts that are affected by each transaction type.
If you use sub transaction types, enter the accounts for each sub transaction type as well.
Activities
Transaction type UTLZ is used for determining accounts only while posting excise JVs and also if the payment of excise duty has to be done fortnightly.
The fortnightly CENVAT payment utility picks up the credit side accounts from the transaction types of GRPO, EWPO, and TR6C for determining the CENVAT and PLA accounts. There is no separate transaction type for fortnightly payment.
Example
Excise TT DC ind Account name
GRPO CR CENVAT clearing account
GRPO CR RG 23 BED account
GRPO DR CENVAT on hld account
Specify G/L Accounts per Excise Transaction
Use
In this IMG activity, you assign the excise and CENVAT accounts to G/L accounts.
When you come to execute the various transactions, the system determines which G/L accounts to post to by looking at the:
Excise group
Company code
Chart of accounts
Furthermore, if you want separate account determination settings within an excise group, you can also use sub transaction types.
Requirements
You have already:
Defined the G/L accounts
Defined the excise groups
Maintained the transaction accounts
Activities
For each excise group, assign the excise and CENVAT accounts to G/L accounts. For most businesses, one set of accounts will suffice for all transactions.
Note
You need not remit the CENVAT to the excise department immediately, so maintain the credit account for transaction type DLFC as an excise duty interim account. This will be set off when you remit the duty.
Config setting needed to be done in order to get the Excise Details Screen in Material Master.
Even though this functionality is available in enterprise version, a small config step has to be made in Screen Sequences for Material Master.
Following document helps you to do this configuration.
Logistics General 1. Go to IMG Define Structure ofData ScreenMaterial Master Configuring the Material master Screen Sequence.for each
2. Select your screen sequence. Usually it would be 21. Select the same and click on Data Screen in the left frame.
3. Once the data screens are exhibited, select data screen no. 15, ie. SSq. 21and Scrn 15, which is Foreign Trade: Import Data. Select the same and click on Subscreens in the left frame.
4. Go to the last sub screen i.e. 21-15-6 - SAPLMGD1- 0001 and select the same. Click on tab view subscreen and ensure that the subscreen is blank.
5. Now in the last sub screen i.e. no.6 you delete SAPLMGD1 0001 and instead add SAPLJ1I_MATERIAL_MASTER and in the screen no. 2205.
6. Save the setting.
7. Create a Material Master and check whether in Screen Foreign Trade Import, Excise related subscreen appears.
Transaction
Action
J1I2
Prepare a sales tax register
J1I3
Create outgoing excise invoices in batches
J1I5
Update the RG 1 and Part I registers
J1IEX
Incoming Excise Invoices (central transaction)
J1IEX_C
Capture an incoming excise invoice (excise clerk)
J1IEX_P
Post an incoming excise invoice (excise supervisor)
J1IF01
Create a subcontracting challan
J1IF11
Change a subcontracting challan
J1IF12
Display a subcontracting challan
J1IF13
Complete, reverse, or recredit a subcontracting challan
J1IFQ
Reconcile quantities for subcontracting challans
J1IFR
List subcontracting challans
J1IH
Make a CENVAT adjustment posting
J1IIN
Create an outgoing excise invoice
J1IJ
Assign excise invoices to a delivery for sales from depots
J1INJV
Adjust withholding tax Item
J1INREP
Reprint a withholding tax certificate for a vendor
J1IQ
Year-End Income Tax Depreciation Report
J1IR
Download register data
J1IS
Process an excise invoice (outgoing) for other movements
J1IU
Process exemption forms
J1IW
Verify and post an incoming excise invoice
J1IX
Create an incoming excise invoice (without reference to purchase order)
J2I8
Transfer excise duty to CENVAT account
J2IU
Remit excise duty fortnightly
J2I9
Monthly CENVAT return
J1IG
Excise invoice entry at depot
J1IGA
Create additional excise entry at depot
J2I5
Extract data for excise registers
J2I6
Print excise registers
rewards if it helps -
Error while creating Billing doc using VF01 for Debit memo req. from RRB
Hi,
I am creating billing doc for my Debit memo req. which is created using RRB(DP90, DP95).
Error message - Item 000010 does not exist.
When I debugged and looked into code it seems following lines are causing problem.
Program
LV60AA28
Line u2013 734
IF vbap-vkgru EQ vkgru_dyn_posten.
IF vbap-aufnr IS INITIAL .
set AUBEL because it was overwritten by VBAP-VBELN
vbrp-aubel = vbap-vgbel.
vbrp-aupos = vbap-vgpos.
vbrp-autyp = vbap-vgtyp.
This code was not in 4.6 system.
We have just migrating from 4.6 to 6.0 and facing this issue while testing.First of all you should try to learn how to express in a public forum like this.
On your comments
Do some ground work from your end
why should I ?? if you want you can do ground work or any work. If you post a question, you have to hear patiently all suggestions and dont scribble whatever you want.
You should have some basic
understanding of SAP ABAP.
You should have posted this question ABAP forum !!!! Why without any sense you have posted in sales forum ?? -
BAPIs to create sales orders for Returns and Debit Memo Request
Hi,
I have to create a sales order for document type Returns as well as a debit memo request.The BAPI 'BAPI_SALESORDER_CREATEFROMDAT2' is giving the following error message for Debit Memo Request document creation as well as for Returns.
761 Unpermitted combination of business object BUS2032 and sales doc. category L
I found BAPIs:
BAPI_CUSTOMERRETURN_CREATE for creating sales document of type ZDRE and SD document category H.
BAPI_DEBITREQUEST_PROXY_CREATE for creating sales document of type ZDDR and SD document category L.
please let me know if anybody have used them. If so what values need to be passed to I_UPLOAD_ID,I_DESTIN,I_SFA_REL parameters of BAPI_DEBITREQUEST_PROXY_CREATE. Are there any alternative solutions using the Salesorder bapi.
I have to create documents based on the flat file data no reference sales document numbers are available.
Appreciate your help..
Good Day
Regards
BhargaviLook at the code done by me
Program Name: *
SAP Name : ZAXXXXXX Version : *
Programmer : Chris Dong of ITDC *
Description : *
Includes : *
Function Modules: XX_XXXXXX *
Transactions : *
Programs : *
REPORT XXXXXXXX LINE-SIZE 80
LINE-COUNT 65
MESSAGE-ID ZA
NO STANDARD PAGE HEADING.
CLEAR l_order_partners.
l_order_partners-partn_role = 'AG'.
l_order_partners-partn_numb = '0001202491'.
APPEND l_order_partners TO li_order_partners.
CLEAR l_order_partners.
l_order_partners-partn_role = 'WE'.
l_order_partners-partn_numb = '0001202491'.
APPEND l_order_partners TO li_order_partners.
Sales document type
l_order_header_in-doc_type = 'ZDR'.
Sales organization
l_order_header_in-sales_org = '1000'.
Distribution channel
l_order_header_in-distr_chan = '01'.
Division
l_order_header_in-division = '04'.
REF DOCUMENT
l_order_header_in-REF_DOC = '9100000144'.
order reason
l_order_header_in-ord_reason = '925'.
item number
l_order_items_in-itm_number = '000001'.
material no
l_order_items_in-material = '000000000007000012'.
Qty
l_order_items_in-target_qty = '0000000000100.000'.
APPEND l_order_items_in TO li_order_items_in.
*BUS2094 Credit memo request " OSS NOTE 93091
*BUS2096 Debit memo request " OSS NOTE 93091
CALL FUNCTION 'BAPI_SALESDOCU_CREATEFROMDATA'
EXPORTING
ORDER_HEADER_IN = l_order_header_in
BUSINESS_OBJECT = 'BUS2096'
WITHOUT_COMMIT = ' '
CONVERT_PARVW_AUART = ' '
IMPORTING
SALESDOCUMENT = l_vbeln
RETURN = li_return
TABLES
ORDER_ITEMS_IN = li_order_items_in
ORDER_PARTNERS = li_order_partners
Message was edited by:
Chris Dong
null -
Standard Process for Credit Memo & Debit Memos in CRM
Dear all,
What is the standard process for Credit Memo and Credit Memo Creation within CRM Complaint Transaction?
We can successfully replicate Return Items and Replacement Items in ECC Return Order
But I don't know how to process Credit Memo and Debit Memo in ECC.
What are the Accounting Implications takes place once we create and release the credit memo / Debit memo in CRM Complaint Transaction?
How to see the entire document flow?
I can create Credit Memo for a Returned Line Item in CRM without any errors. But I could not see any follow-up transaction or process either in CRM or ECC.
Kindly educate me in this regard. Your suggestions are highly appreciated
Best regards
Raghu ram
Edited by: Raghu Ram on Jun 23, 2010 6:29 PM
Edited by: Raghu Ram on Jun 25, 2010 8:30 AMHi suchi,
The following would be very useful to you.
To reduce implementation time for print forms development, SAP has created a set of the most commonly used forms - Preconfigured Smart Forms:
<u><b>SD:</b></u> Invoice, Quotation, Contract, Delivery Note, Order Confirmation, Scheduling Agreement, Inquiry, Cash Sales, Picking List
<b><u>MM</u></b>: Purchase Order, Request for Quotation, Contract, Delivery Schedule, Good Issue (3 scenarios), Good Receipt (3 scenarios)
<b><u>FI:</u></b> Dunning Notice
All can easily adapt these forms to their requirements, saving time and money.
Hope this information has been useful to you.
if you would like to have a smartform of your own i.e a Z or a Y then there is an option to get a sap script copied onto a smartform.
the sap script for the same is -> <b>F140_DOCU_EXC_01</b>
Go to Txn SMARTFORMS and just put the required smart form name in FORM field and then go to the menu bar: Utilities-> Migrate SAPScriptForm and juts type in the Script name which is given above(i.e F140_DOCU_EXC_01 )
I hope this will be an amicable solution.
if helpful pls reward.
Thanks
Venugopal -
Hi ,
I have a problem related to excise invoice for debit memo ,problem is ,
We have created the order,delivery,billing and excise invoice for the basic price of Rs.100.
But now the basic price has increased,and its become Rs.120.
So that ,now we have created the debit memo requeste and debit memo for the balance amount of Rs.20.But as you know that there is no delivery, so we can not create the excise invoice for debit amount (Rs.20).
So for that amount I tried to create the excise invoice with t.code J1IH (other adjustment),but this amount is going in cenvat clearing account.
So can you please guide me that how can I create the excise invoice to debit the cenvat suspence account.
Please reply ASAP.
Regards
PrabudhHi everyone,
I am waiting for reply.
Thanks
Maybe you are looking for
-
WebClient Error - Failed to log on to the comm. mgmt. software
Hi, following the CR410 i have created a webclient profile/ framework, and assigned the profile to an org unit. now when try to open the webclient using crm_ic, i am getting the above error on the IDES system. <b>"Failed to log on to the communicatio
-
Is there a way to select matching pixels on 2 different layers?
Hey there, I've been wondering about this a long time now and can't seem to figure it out. I hope u guys can help me crack this. If I shoot 2 different portraits (of 2 different people), against the same background (a complex one not a backdrop), usi
-
MI424WR-GE​N2, F
I was having problems with my previous GEN1 router when trying to connect several new devices (including a wireless printer, a TV, a Wii U, and a blu-ray player). Talking with tech support they said they would send me the latest GEN3 router to fix my
-
How to connect Java Application to ORACLE8i over SSL connection
Hi, I would like to know how to make an existent Java application connect to an ORACLE8i database over a secure SSL connection? can I user ResultSets? Could you please tell me what parameters to set on the database and, especially, what new code must
-
Frame Sizes! Help Needed Urgently!!
I'm hoping someone out there can assist me with a small problem I'm having. I'm almost finished editing a 30-minute project and I'm having trouble with the aspect of some of my clips. Some are full screen, and others are remaining in a wide screen si