Approver details for created SC

Hi ,
I have Object ID (SC#), based on the Object ID I need to get the status of the Shopping cart and with whom the SC is waiting for approval. Need to display the name of the approver also. I dont have workitem ID.
Do we have any standard FM to achieve this... ?
Replies are highly appreciated.
Thanks
Rupachandran G

Hi,
There is no one standard FM to achieve this. But you can achieve this as below :
Run the FM BBP_DOC_STATUS_GET with the SC Guid , object type BUS2121 and also input the IT_STATUS with the available status of the SC.
You can get this list by running the FM BBP_PD_STATUS_GETDETAIL. The resultant ET_STATUS can be input to the FM BBP_DOC_STATUS_GET .
The resultant status of the FM BBP_DOC_STATUS_GET is the latest SC status.

Similar Messages

Need sql query to get OIM request pending approval details for one user

HI OIM Guru,
It would be great help if someone can provide me sql query by which i can find out how many requests are pending for approval for one user ?

1. Below query will give you status of all the request.
SELECT REQ.REQUEST_ID , REQ.REQUEST_STATUS FROM REQUEST REQ
2. You can have following status
Obtaining Operation Approval
Obtaining Template Approval
Operation Approval Approved
Operation Approval Rejected
Post Operation Processing Initiated
Request Approval Rejected
Request Closed
Request Completed
Request Created
Request Failed
Request Withdrawn
Template Approval Rejected
3. Now prepare the query from above sapmle, the requset status string should not contains foloowing values.
Rejected
Failed
Closed
Withdrawn
Completed
The builded query will give you the desired result for 11g
for 10 G
Get the OST_STATUS from Req table, and do you logic above stated
-Kuldeep
Edited by: Kuldeep on May 22, 2012 1:04 AM

Req Idoc steps in detail for creating Idoc control records(Sender Non SAP)

Hello All,
I have a scenario where a Microsoft biztalk server communicates with SAP ECC through Idoc ORDERS05 . i need to give them the information of the below IDoc control records
SNDPOR
SNDPRT
SNDPFC
SNDPRN
RCVPOR
RCVPRT
RCVPFC
RCVPRN
IDOCtype
Since the sender is Ms Biztalk . kindly let me know the detailed steps involved in creating the sender side info such as SNDPOR, SNDPRT, SNDPFC and SNDPRN.
Thanks in advance ,
Pavithra

Hi,
The info like (SNDPRN) which has to be providen by Biztalk in the IDoc control of their Idoc are these ones that YOU defined in the ALE config (tx WE20) of your ECC, to accept this IDoc (idoc message / idoc type) from Biztalk.
If your ALE config is not yet created in your ECC, you have to do it. For instance, check in WE20 (partner profile) the ALE config of your other systems, and in WE02 (Idoc log) to see the content of an IDoc Control, by selecting an inbound Idoc.
Do not hesitate to use WE19 to test an idoc integration, as you have to fill the idoc control manually. By this way you will sure be of what info Biztalk has to put inside their IDoc control (EDI_DC40).
Regards
Mickael

Approval Dates for each Approver in Document Details

Hello,
Please I want to know if this can be done. I need to show the approval dates for each approval step of a document next to the approver name in the iview,
Context Menu of a document -> Details -> Settings -> Approval. (The approval process must be enabled).
Example:
Approval Process
Step
Approvers
1 User, Intranet has approved - 25/07/2010 9:10 AM
2 lastname, name has approved - 27/07/2010 10:08 AM
I don't know if this is possible.
Thanks & Regards
SU
Edited by: soauniverse on Jul 27, 2010 7:15 PM

Hello,
After searching for days in SDN / HELP, I found that in "km.appl.ui.statemanagement_api.jar" there are ".properties" for all the languages. What takes my attention is the file "ApprovedItemRenderer_en.properties" that has this content,
#File created by SLIM generator ($SP-DIFF-TRANSLATED-FILE$)
xfld_author=Approved By
xfld_date=Approved On
The standard portal displays Approved By. But I see that SAP has thought in the approval date? Is there an easy way or how can I activate the property xfld_date?
Thanks & Regards
SU

Creating an approval workflow for a customized request form

Hello,
I have created a customized request form in FIM that users are to fill up and submit for rights request. A workflow is required for for request process from the requester an escalation of approvers for the request to be approved or denied.
My challenges are:
Adding a control to my xml configuration file that will allow users to select multiple items, a checkbox feature with a list of rights to apply for
Creating a workflow for the customized request form, so that the approvers receive mail with the details filled on the form as the body text of the mail.?
How can I achieve these? I will greatly appreciate your help.
Regards,
Josephine

I would suggest you go through this walkthrough here:
http://technet.microsoft.com/en-us/library/ee534919(v=ws.10).aspx
and this is also very helpful:
http://blog.msresource.net/2012/07/13/including-who-approved-or-rejected-an-approval-in-its-notification-email/
- You need an email template with all your custom content
- you need a notification workflow containing the recipient Information
- you need a MPR starting the workflow when the user checks the box
- FIM needs to know the email attribute of the approver to be able to send the mail
- the owner Attribute of the Group must be set, this is the recipient of the approval mail in case of the Default owner approval workflow. in your case you set the appropriate Attribute of the group
- and of cause the Connection between FIM and Exchange must be available. If not, you see a lot of Errors and warnings in the eventlog.
Henry

Create an Approval Workflow for User Creation in AD

Hi
Anyone, tell me how to create an approval workflow to create users into AD. For example, before provisioning user into AD resouce the request should go to the Manager of the user for approval.
P.S: I am using OIM 9.1
Thanks
Sireesha

Hi Sireesha
You want to create a new Process definition, selecting "Approval" as the process type.
Then associate it with the AD User Resource Object. Add a "Manager Approval" process task and use a Task Assignment Adapter to to assign the task to the manager of the request target.
In order for the Approval Process to fire, you need to ensure that you provision the AD User Resource Object via a Request, rather than directly.
HTH
Cheers
Rob

Approval for creating users in an organization

Hi,
We have a requirement where approval is required for creating users in Organisation X. Also, the admin has to fill in a field SSN before approving the request. We have implemented this by changing the approval form. But the admin can still approve by selecting it from the approval list directly (without viewing the form), where he wouldn't be prompted for SSN. Is there any way to avoid this so that admin has to provide SSN before approving?
Thanks,
Teena

Hi Jason,
The WebLogic LDAP realm implementations (both -- V1 and V2) have only read access on your LDAP server.
You are recommended to use your LDAP server's own management tools to create groups and users on the LDAP server.
Joe Jerry
Jason Howard wrote:
Hi,
I am trying to determine whether or not it is possible to create users in an LDAP
Realm.
The documentation makes it clear that it is not currently possible with LDAPRealm
V2, but it is ambiguous as to whether it can be done with LDAPRealmV1.
My attempts to do this have been met with the following runtime exception:
Servlet failed with Exception
java.lang.UnsupportedOperationException: group modification not supported at weblogic.security.acl.DefaultGroupImpl.addMember(DefaultGroupImpl.java:39)
The method addMember is being called on an implementation of the interface Group.
This Group object is being returned without exceptions from the method getGroup(java.lang.String
name) from an instance of weblogic.security.acl.CachingRealm
The instance of CachingRealm is caching the LDAPRealm V1 pointing at an iPlanet server.
NOTE: I can confirm that the configuration of the LDAP Realm is correct because I
can see the users and groups contained within from the weblogic console.
Can anyone confirm one way or the another, whether LDAPRealmV1 supports the ability
to create users and add them to groups.
Regards
Jason

How to Get Each line item Create and Approval dates for a SHOPPING CART in SAP SRM (ABAP Programming)

Hi All,
I have to Get Each line item Create and Approval dates for a SHOPPING CART in SAP SRM. Either a table, or any Function module, Method, please let me know ASAP. Same i can use in my Program.
Thank you Very much.
Regards,
Ramesh J.

Hi,
Refer the below wiki link it may help you.
Product catlog configuration for ECC - CRM - SCN Wiki

HCM/OM workflow template - approval for creating positions

Hi Guys,
My requirement is to create a custom workflow for the approval process of creating positions. I have the follwing questions:
1. Is there any workflow template that can be used?
2. What BO should be used?
3. On what event should the WF be triggered?
Many Thanks in advance,
Cristian

Please check with these Business objects
PDOTYPE_S Position
PDOTYPE_SH HR Position
Thanks
Arghadip

Create approval request for Delete User operati with oim api -11g Release2

Hi,
How I can create an approval request for a User Delete operation usin API? Can anyone quide me? Any help is strongly appreciated..
BR,
Aliye

You can use the exact same technique for any of the other requests submissions through APIs that have been posted on this message forum. Just supply the template name for your request template you plan to use.
Here is a page of sample code for requests. http://java.net/projects/openptk/sources/svn/show/branches/Oracle/OIM11g/examples/java/OIMClient/src/oim/client/request?rev=1402
-Kevin

How to create Approval procedures for various departments

Hi Experts,
I want to create a approval procedures for sales , purchase, production and finance screens.
I am going to the Approval stages , there i am giving name, description and selecting authorizer and finally when i want to select the sales module under department , there i can see only general .
i cldnt see all the departments here. what is the reason? solution for this. PLease.
Thanks & Regards,
Dwarak

Hi Dwarak,
Please specify the department in Administration --> Setup --> General --> Users and find the user code and then map the departments.
In the Approval templates Originator is where the users can be setup and in the select the required documents and map the create th Approval stage ( The user who authorises the document created by the originators)
Regards,
Rakesh N

CATT script for creating Contract Detail lines

In my requirement I have to use the transaction SCAT and record the transaction ME31K for creating the line items. But when adding more than 1 line item the function is not working only the first detailed line item is added, no more. Please help.

Hi shashikant
Use Message type BLAORD .. FM: IDOC_OUTPUT_BLAORD (Process code is ME15 (Not sure) in AFS it is /afs/md15- BLAORD: AFS Contract via EDI)
Thanks
Ramesh
302 290 5677

Approval for creating PO when budget is exceeded

Dear all,
We use Fund management to check budget when creating PO. If amount on PO exceed budget, the system issue error message. So can we use Business workflow for manager to approve to continue creating PO in this case? Or another solution?
Please give me a solution
Thanks very much

This would be a good idea if we implement it, you mean that once the budget is exceeded, from the approval of manager, still the PO is to processed.
In Current SAP system, there is only possible to stop creating the Purchase order once the budget is exceeded.
Possible solution will be in Standard SAP, you should not make this configuration settings, you may use the user exit to achieve the requirement.
Thanks
Sudhir Krishna Kumar Singh

Error while assigning user for release approval path for payment release

Hi everyone,
     I am trying to assign user for payment release in SPRO. I have defined upto 'Define relevant document types for release for payment', after that while assigning user in terms of position for release and save it, i am getting error 'Program error: ASSIGN with length 0 in program "MP120800" '.Because of it i can t proceed further.
The data in details below;
1. Create Workflow Variant for Release for Payment
   1000     SAP
2. Assign Company Code Workflow Variant for Release for Payment
1000     1000     SAP
3. Define Release Approval Groups for Release for Payment
0001     Vendor A
0002     vendor B
0003     Vendor C
0004     G/L accounts
4. Define Release Approval Paths for Release for Payment
0001     Vendor high
0002     Vendor middle
0003     Vendor low
0004     G/L accounts
0005     Other
5. Assign Release Approval Paths for Release for Payment
1000     KZ     0001     0001
1000     KZ     0002     0002
1000     KZ     0003     0003
6. Assign Release Approval Procedure for Release for Payment
1000     0001     20,000.00     KES     1     WS10000052     WS00400011
1000     0002     50,000.00     KES     2     WS10000052     WS00400021
1000     0003     1,000,000.00     KES     3     WS10000052     WS00400022
7. Define Relevant Document Types for Release for Payment
     1000     KR
1000     KZ
8. Define Users with Authorization to Payment Release
1000     0001     1     20,000.00     KES
1000     0001     2     50,000.00     KES
1000     0001     3     100,000.00     KES
here i have selected the option and tried to create Orgobject, i am getting following error
Program error: ASSIGN with length 0 in program "MP120800"
If any corrections in the definitions, Please let me know.
Thanks in advance!!

Hello,
Please start the report RSWOGIND, set also the checkbox "generate all
ObjTypes from new". This should solve the problem.
Best regards, Hana

Approval preview not displaying approval details in 'Check Status'

Hi All,
I am facing an issue in the below scenario:-
First a requestor creates an Advice Special Request Form which goes to a purchaser for approval. The purchaser rejects this item and adds a new item by creating a special request form and fills in correct details. While he does this, the cost assignment for the items is different(multiple cost center assignment). Then he approves this Shopping cart. When the requestor Accepts the Changes, he is not able to view the approver details. But once he clicks on change option, then the approval details are shown in the approval preview.
Is there any way that the approval details are shown when the user clicks on the 'Approval preview' as the SC has already gone for approval to the manager? Is there any particular reason why only in change mode he can see the approval details?

Dear Poster,
As no response has been provided to the thread in some time I must assume the issue is resolved, if the question is still valid please create a new thread rephrasing the query and providing as much data as possible to promote response from the community.
Best Regards,
SDN SRM Moderation Team

Approver details for created SC

Similar Messages

Maybe you are looking for