ASA default gateway

Estou montando um novo projeto de rede onde quero que o meu Switch de layer 3 seja o gateway da rede e o ASA o GATEWAY deste SWITCH. Hoje o ASA é o gateway da rede e tem 3 vlas criadas em interfaces virtuas.
O problema é o seguinte quando crio as novas Vlans no switch não consigo ter comunicação entre as Vlans antigas que já estão configuradas no ASA mesmo criando ACL no ASA. quando pingo de um PC na nova VLAN para um PC que esta na VLAn já criada no ASA o pacote até chega no ASA mas recebo a seguinte mensagem "an ICMP session is removed in the fast-path when stateful ICMP is enabled using the inspect icmp command."
Alguem já passou pro esse problema? quem poder ajudar agradeço muito.
Obrigado!
Vagner

Ola Vagner,
Nois podemos ter a configuração do ASA?
Mike

Similar Messages

Default Gateway when connected to VPN

Thanks for reading!
This is probably a dump question so bear with me...
I have set up a VPN connection with a Cisco ASA 5505 fronting internet, with the customers environment behind it (on the same subnet), When connected ot the VPN I can reach the inside Router fronting me and one switch behind the Router (every switch is connected to the router), but nothing else.
My beet is that the Router is messing with my connection, but,, nevermind that!, the setup ain't complete anyway... my question is more related to the Gateway I'm missing when I'm, from the outside, is connected to the VPN on the ASA, could this mess it up? Shouldn't I have a Standard-Gateway in the ipconfig settings in windows?
This is who it looks like now:
        Anslutningsspecifika DNS-suffix . : VPNOFFICE
        IP-adress . . . . . . . . . . . . : 10.10.10.1
        Nätmask . . . . . . . . . . . . . : 255.255.255.0
        Standard-gateway . . . . . . . . :
The internal network is :
172.16.12.0 255.255.255.0
Below is my config for the ASA, thanks a lot!!!!!!!
!FlASH PÅ ROUTERN FRÅN BÖRJAN
!asa841-k8.bin
hostname DRAKENSBERG
domain-name default.domain.invalid
enable password XXXXXXX
names
interface Vlan1
nameif inside
security-level 100
ip address 172.16.12.4 255.255.255.0
interface Vlan10
nameif outside
security-level 0
ip address 97.XX.XX.20 255.255.255.248
interface Ethernet0/0
switchport access vlan 10
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
ftp mode passive
clock timezone CEST 1
clock summer-time CEDT recurring last Sun Mar 2:00 last Sun Oct 3:00
dns server-group DefaultDNS
domain-name default.domain.invalid
object-group protocol TCPUDP
protocol-object udp
protocol-object tcp
access-list nonat extended permit ip 172.16.12.0 255.255.255.0 10.10.10.0 255.255.255.0
access-list MSS_EXCEEDED_ACL extended permit tcp any any
access-list VPN-SPLIT-TUNNEL remark VPN SPLIT TUNNEL
access-list VPN-SPLIT-TUNNEL standard permit 172.16.12.0 255.255.255.0
tcp-map MSS-MAP
exceed-mss allow
pager lines 24
logging enable
logging timestamp
logging buffer-size 8192
logging console notifications
logging buffered notifications
logging asdm notifications
mtu inside 1500
mtu outside 1500
ip local pool VPN 10.10.10.1-10.10.10.40 mask 255.255.255.0
icmp unreachable rate-limit 1 burst-size 1
icmp permit any inside
icmp permit any outside
asdm image disk0:/asdm-625-53.bin
no asdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 0 access-list nonat
nat (inside) 1 172.16.12.0 255.255.255.0
route outside 0.0.0.0 0.0.0.0 97.XX.XX.17 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout uauth 0:05:00 absolute
dynamic-access-policy-record DfltAccessPolicy
aaa authentication ssh console LOCAL
http server enable
http 172.16.12.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac
crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set pfs group1
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5
crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map outside_map interface outside
crypto isakmp enable outside
crypto isakmp policy 10
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
crypto isakmp policy 65535
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
telnet timeout 5
ssh 172.16.12.0 255.255.255.0 inside
ssh timeout 5
console timeout 0
threat-detection basic-threat
threat-detection statistics access-list
group-policy VPNOFFICE internal
group-policy VPNOFFICE attributes
dns-server value 215.122.145.18
vpn-tunnel-protocol IPSec
split-tunnel-policy tunnelspecified
split-tunnel-network-list value VPN-SPLIT-TUNNEL
default-domain value VPNOFFICE
split-dns value 215.122.145.18
msie-proxy method no-proxy
username admin password XXXXXX privilege 15
username Daniel password XXXXX privilege 0
username Daniel attributes
vpn-group-policy VPNOFFICE
tunnel-group VPNOFFICE type remote-access
tunnel-group VPNOFFICE general-attributes
address-pool VPN
default-group-policy VPNOFFICE
tunnel-group VPNOFFICE ipsec-attributes
pre-shared-key XXXXXXXXXX
class-map MSS_EXCEEDED_MAP
match access-list MSS_EXCEEDED_ACL
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect netbios
inspect rsh
inspect rtsp
inspect skinny
inspect esmtp
inspect sqlnet
inspect sunrpc
inspect tftp
inspect sip
inspect xdmcp
inspect icmp error
inspect pptp
inspect ipsec-pass-thru
inspect icmp
class MSS_EXCEEDED_MAP
set connection advanced-options MSS-MAP
service-policy global_policy global
privilege cmd level 3 mode exec command perfmon
privilege cmd level 3 mode exec command ping
privilege cmd level 3 mode exec command who
privilege cmd level 3 mode exec command logging
privilege cmd level 3 mode exec command failover
privilege cmd level 3 mode exec command packet-tracer
privilege show level 5 mode exec command import
privilege show level 5 mode exec command running-config
privilege show level 3 mode exec command reload
privilege show level 3 mode exec command mode
privilege show level 3 mode exec command firewall
privilege show level 3 mode exec command asp
privilege show level 3 mode exec command cpu
privilege show level 3 mode exec command interface
privilege show level 3 mode exec command clock
privilege show level 3 mode exec command dns-hosts
privilege show level 3 mode exec command access-list
privilege show level 3 mode exec command logging
privilege show level 3 mode exec command vlan
privilege show level 3 mode exec command ip
privilege show level 3 mode exec command ipv6
privilege show level 3 mode exec command failover
privilege show level 3 mode exec command asdm
privilege show level 3 mode exec command arp
privilege show level 3 mode exec command route
privilege show level 3 mode exec command ospf
privilege show level 3 mode exec command aaa-server
privilege show level 3 mode exec command aaa
privilege show level 3 mode exec command eigrp
privilege show level 3 mode exec command crypto
privilege show level 3 mode exec command vpn-sessiondb
privilege show level 3 mode exec command ssh
privilege show level 3 mode exec command dhcpd
privilege show level 3 mode exec command vpnclient
privilege show level 3 mode exec command vpn
privilege show level 3 mode exec command blocks
privilege show level 3 mode exec command wccp
privilege show level 3 mode exec command webvpn
privilege show level 3 mode exec command module
privilege show level 3 mode exec command uauth
privilege show level 3 mode exec command compression
privilege show level 3 mode configure command interface
privilege show level 3 mode configure command clock
privilege show level 3 mode configure command access-list
privilege show level 3 mode configure command logging
privilege show level 3 mode configure command ip
privilege show level 3 mode configure command failover
privilege show level 5 mode configure command asdm
privilege show level 3 mode configure command arp
privilege show level 3 mode configure command route
privilege show level 3 mode configure command aaa-server
privilege show level 3 mode configure command aaa
privilege show level 3 mode configure command crypto
privilege show level 3 mode configure command ssh
privilege show level 3 mode configure command dhcpd
privilege show level 5 mode configure command privilege
privilege clear level 3 mode exec command dns-hosts
privilege clear level 3 mode exec command logging
privilege clear level 3 mode exec command arp
privilege clear level 3 mode exec command aaa-server
privilege clear level 3 mode exec command crypto
privilege cmd level 3 mode configure command failover
privilege clear level 3 mode configure command logging
privilege clear level 3 mode configure command arp
privilege clear level 3 mode configure command crypto
privilege clear level 3 mode configure command aaa-server
prompt hostname context
Cryptochecksum:aaa1f198bf3fbf223719e7920273dc2e
: end

I didn't realise I had that crypto settings on, thanks my bad!!!
But... the 172.16.12.0 network is directly connected, the Router (that to be honest is a firewall) / switches is all on the same subnet (172.16.12.X/24), so sorry I didn't explain thoroughly, was more wondering about the GW and didn't want to overcomplicate things..
The Firewall/Router dosen't do any routing, so it should work right (I you count out the firewalling in the firewall and so forth, there shouldn't be any problems accomplishing this with the ASA)? The Firewall is more a DHCP for the clients/Firwall for the clients.. this will change in the future.. it will be removed,
the vpn network is staticly routed back to my ASA in that firewall...
I don't like this solution.. but this is who it looks.. for now..
(VPN network is 10.10.10.X/24)
But... shouldn't I see a default gateway under ipconfig when I'm connected to the VPN from internet, on the vpn client that's vpned in, is this correct?
THANKS for all the help!

VPN Clients getting different default gateways

Hello,
We have a new Cisco ASA 5520 and are trying to setup the VPN with split tunneling. We mostly have clients running XP and the problem is that some of the clients connect (using Cisco Anyconnect 2.5) and the split tunneling works as expected --these clients keep their default gateway-- and then some clients connect and get a default gateway of 192.168.119.1 (our VPN addresses subnet) and of course these users cannot connect to the internet while connected to the VPN.
Here is our config:
ASA Version 9.1(1)
hostname xxxxxx
names
name 178.239.80.0 Deny178.239.80.0 description 178.239.80.0
name 74.82.64.0 Deny74.82.64.0 description 74.82.64.0
name 173.247.32.0 Deny173.247.32.0 description 173.247.32.0
name 193.109.81.0 Deny193.109.81.0 description 193.109.81.0
name 204.187.87.0 Deny204.187.87.0 description 204.187.87.0
name 206.51.26.0 Deny206.51.26.0 description 206.51.26.0
name 206.53.144.0 Deny206.53.144.0 description 206.53.144.0
name 67.223.64.0 Deny67.223.64.0 description 67.223.64.0
name 93.186.16.0 Deny93.186.16.0 description 93.186.16.0
name 216.9.240.0 Deny216.9.240.0 description 216.9.240.0
name 68.171.224.0 Deny68.171.224.0 description 68.171.224.0
ip local pool PAIUSERS 192.168.119.10-192.168.119.100 mask 255.255.255.0
interface GigabitEthernet0/0
nameif outside
security-level 0
ip address 63.86.112.194 255.255.255.192
interface GigabitEthernet0/1
nameif inside
security-level 100
ip address 192.168.129.5 255.255.255.192
interface GigabitEthernet0/2
nameif dmz
security-level 10
ip address 192.168.20.10 255.255.255.0
interface GigabitEthernet0/3
nameif vpn_dmz
security-level 25
ip address 192.168.30.10 255.255.255.0
interface Management0/0
management-only
shutdown
nameif management
security-level 100
ip address 192.168.102.4 255.255.255.0
object network obj-192.168.119.0
subnet 192.168.119.0 255.255.255.0
access-list outside_access_in extended permit ip host 192.168.119.11 host 192.168.35.23
access-list outside_access_in extended permit object-group TCPUDP any4 object-group DM_INLINE_NETWORK_3 object-group UDP_TCP_Domain inactive
access-list outside_access_in extended permit udp any4 object obj-192.168.30.11 eq isakmp
access-list outside_access_in extended permit ip any4 object obj-192.168.30.11
access-list outside_access_in extended permit udp any4 object obj-192.168.30.11 object-group UDP10000
access-list outside_access_in extended permit udp any4 object-group DM_INLINE_NETWORK_7 eq domain inactive
access-list outside_access_in extended permit tcp any4 object-group DM_INLINE_NETWORK_8 eq domain inactive
access-list outside_access_in extended permit tcp host 216.81.43.190 host 192.168.35.30 eq ssh inactive
access-list outside_access_in extended permit tcp host 216.81.43.190 object obj-192.168.35.30 object-group DM_INLINE_TCP_6 inactive
access-list outside_access_in extended permit tcp any4 object-group DM_INLINE_NETWORK_9 eq www inactive
access-list outside_access_in extended permit tcp any4 object obj-192.168.30.11 eq www
access-list outside_access_in extended permit esp any4 object obj-192.168.30.11
access-list outside_access_in extended permit tcp any4 object obj-192.168.35.41 eq www
access-list outside_access_in extended permit tcp any4 object obj-192.168.35.41 eq https
access-list outside_access_in extended permit tcp any4 host 192.168.35.34 eq https
access-list outside_access_in extended permit object-group TCPUDP any4 object obj-192.168.35.30 object-group Ports_UDpTCP
access-list outside_access_in extended permit tcp any4 object obj-192.168.35.30 object-group DM_INLINE_TCP_7
access-list outside_access_in extended permit tcp any4 object obj-192.168.35.30 eq ftp
access-list outside_access_in extended permit object-group TCPUDP any4 host 63.86.112.248
access-list outside_access_in extended permit udp any4 host 162.95.80.115 eq isakmp
access-list outside_access_in extended permit tcp any4 host 162.95.80.115 object-group Ports_115
access-list outside_access_in extended permit udp any4 host 162.95.80.115 object-group Ports_2746_259
access-list outside_access_in extended permit object-group TCPUDP any4 host 63.86.112.245 object-group Service_Group_245 inactive
access-list outside_access_in extended permit object-group TCPUDP any4 object obj-192.168.35.40 object-group UDP_TCP_Domain
access-list outside_access_in extended permit tcp any4 object obj-192.168.35.40 object-group DM_INLINE_TCP_2
access-list outside_access_in extended permit tcp any4 object obj-192.168.129.11 object-group DM_INLINE_TCP_1
access-list outside_access_in extended permit object-group TCPUDP any4 object obj-192.168.129.11 object-group UDP_TCP_Domain
access-list outside_access_in extended permit tcp any4 object obj-192.168.129.11 object-group Network_Service_2703_6277
access-list outside_access_in extended permit udp any4 object obj-192.168.129.11 object-group UDP_443
access-list outside_access_in extended permit ip any4 host 192.168.101.75 inactive
access-list outside_access_in extended permit tcp any4 host 64.78.239.50 eq www
access-list outside_access_in extended permit tcp any4 host 64.78.239.54 object-group TCP_4445
access-list outside_access_in extended permit icmp any4 any4
access-list outside_access_in extended permit udp any4 object obj-192.168.35.40 object-group UDP_443
access-list outside_access_in extended permit tcp any4 host 63.86.112.204 object-group DM_INLINE_TCP_5
access-list outside_access_in extended permit tcp any4 host 63.86.112.204
access-list outside_access_in extended permit udp any4 host 63.86.112.204
access-list outside_access_in extended permit object-group TCPUDP any4 host 192.168.102.12 object-group Network_Server_1194
access-list outside_access_in extended permit tcp any4 host 192.168.102.12 eq www
access-list outside_access_in extended permit tcp any4 host 192.168.102.12 eq https
access-list outside_access_in extended permit object-group TCPUDP any4 object obj-192.168.35.41 object-group Network_Server_1194
access-list outside_access_in extended permit tcp any4 object obj-192.168.35.12 eq www
access-list outside_access_in extended permit tcp any4 object obj-192.168.35.12 object-group DM_INLINE_TCP_3
access-list outside_access_in extended permit tcp any4 host 63.86.112.193 object-group Network_Service_TCP_1194
access-list outside_access_in extended deny tcp object Deny206.51.26.0 object obj-192.168.35.40 eq https
access-list outside_access_in extended deny tcp object Deny193.109.81.0 object obj-192.168.35.40 eq https
access-list outside_access_in extended deny tcp object Deny204.187.87.0 object obj-192.168.35.40 eq https
access-list outside_access_in extended deny tcp object Deny206.53.144.0 object obj-192.168.35.40 eq https
access-list outside_access_in extended deny tcp object Deny216.9.240.0 object obj-192.168.35.40 eq https
access-list outside_access_in extended deny tcp object Deny67.223.64.0 object obj-192.168.35.40 eq https
access-list outside_access_in extended deny tcp object Deny93.186.16.0 object obj-192.168.35.40 eq https
access-list outside_access_in extended deny tcp object Deny68.171.224.0 object obj-192.168.35.40 eq https
access-list outside_access_in extended deny tcp object Deny74.82.64.0 object obj-192.168.35.40 eq https
access-list outside_access_in extended deny tcp object Deny178.239.80.0 object obj-192.168.35.40 eq https
access-list outside_access_in extended deny tcp object Deny173.247.32.0 object obj-192.168.35.40 eq https
access-list vpn_dmz_access_in extended permit ip host 192.168.35.23 192.168.119.0 255.255.255.0
access-list vpn_dmz_access_in extended permit gre host 192.168.30.11 any4
access-list vpn_dmz_access_in extended permit tcp any4 host 23.0.214.60 eq https
access-list vpn_dmz_access_in extended permit udp object-group DM_INLINE_NETWORK_28 any4
access-list vpn_dmz_access_in extended permit tcp any4 object obj-192.168.35.105 object-group DM_INLINE_TCP_4
access-list vpn_dmz_access_in extended permit esp any4 object obj-192.168.35.105
access-list vpn_dmz_access_in extended permit tcp any4 object obj-192.168.35.105
access-list vpn_dmz_access_in extended permit icmp any4 object obj-192.168.35.105
access-list vpn_dmz_access_in extended permit tcp any4 host 192.168.129.11
access-list vpn_dmz_access_in remark RDP
access-list vpn_dmz_access_in extended permit tcp any object-group DM_INLINE_NETWORK_1 eq 3389
access-list vpn_dmz_access_in extended permit icmp any4 object obj-192.168.35.23
access-list inside_nat0_outbound extended permit ip any4 192.168.119.0 255.255.255.0
access-list ftp-timeout extended permit tcp host 216.81.43.190 host 63.86.112.248
access-list ftp-timeout extended permit tcp host 63.86.112.248 host 216.81.43.190
access-list ftp-timeout extended permit tcp host 192.168.35.30 host 216.81.43.190
access-list ftp-timeout extended permit tcp host 216.81.43.190 host 192.168.35.30
access-list Split_Tunnel_List remark northwoods
access-list Split_Tunnel_List standard permit host 192.168.35.23
access-list Split_Tunnel_List remark paits2
access-list Split_Tunnel_List standard permit host 192.168.35.198
access-list Split_Tunnel_List standard deny 192.168.102.0 255.255.255.0
access-list AnyConnect_Client_Local_Print extended deny ip any4 any4
access-list AnyConnect_Client_Local_Print extended permit tcp any4 any4 eq lpd
access-list AnyConnect_Client_Local_Print remark IPP: Internet Printing Protocol
access-list AnyConnect_Client_Local_Print extended permit tcp any4 any4 eq 631
access-list AnyConnect_Client_Local_Print remark Windows' printing port
access-list AnyConnect_Client_Local_Print extended permit tcp any4 any4 eq 9100
access-list AnyConnect_Client_Local_Print remark mDNS: multicast DNS protocol
access-list AnyConnect_Client_Local_Print extended permit udp any4 host 224.0.0.251 eq 5353
access-list AnyConnect_Client_Local_Print remark LLMNR: Link Local Multicast Name Resolution protocol
access-list AnyConnect_Client_Local_Print extended permit udp any4 host 224.0.0.252 eq 5355
access-list AnyConnect_Client_Local_Print remark TCP/NetBIOS protocol
access-list AnyConnect_Client_Local_Print extended permit tcp any4 any4 eq 137
access-list AnyConnect_Client_Local_Print extended permit udp any4 any4 eq netbios-ns
access-list IS_Split_Tunnel standard permit 192.168.102.0 255.255.255.0
access-list IS_Split_Tunnel standard permit 192.168.82.0 255.255.255.0
access-list IS_Split_Tunnel standard permit 192.168.35.0 255.255.255.0
nat (inside,outside) source static object-192.168.35.0 object-192.168.35.0 destination static obj-192.168.119.0 obj-192.168.119.0 no-proxy-arp route-lookup
nat (inside,outside) source static obj-192.168.82.0 obj-192.168.82.0 destination static obj-192.168.119.0 obj-192.168.119.0 no-proxy-arp route-lookup
nat (inside,outside) source static obj-192.168.102.0 obj-192.168.102.0 destination static obj-192.168.119.0 obj-192.168.119.0 no-proxy-arp route-lookup
webvpn
enable outside
enable inside
enable dmz
anyconnect-essentials
anyconnect image disk0:/anyconnect-win-2.5.2014-k9.pkg 1
anyconnect image disk0:/anyconnect-macosx-i386-2.5.2014-k9.pkg 2
anyconnect profiles pairemoteuser disk0:/pairemoteuser.xml
anyconnect enable
tunnel-group-list enable
group-policy PAIGroup internal
group-policy PAIGroup attributes
vpn-tunnel-protocol ssl-clientless
webvpn
url-list value PAI
group-policy PAIUSERS internal
group-policy PAIUSERS attributes
wins-server value 192.168.35.57
dns-server value 192.168.35.57
vpn-tunnel-protocol ikev2 ssl-client ssl-clientless
split-tunnel-policy tunnelspecified
split-tunnel-network-list value Split_Tunnel_List
default-domain none
webvpn
anyconnect firewall-rule client-interface private value vpn_dmz_access_in
anyconnect profiles value pairemoteuser type user
group-policy PAIIS internal
group-policy PAIIS attributes
wins-server value 192.168.35.57
dns-server value 192.168.35.57
vpn-tunnel-protocol ikev2 ssl-client ssl-clientless
split-tunnel-policy tunnelspecified
split-tunnel-network-list value IS_Split_Tunnel
default-domain none
webvpn
anyconnect firewall-rule client-interface private value vpn_dmz_access_in
anyconnect profiles value pairemoteuser type user
group-policy DfltGrpPolicy attributes
banner value Welcome to PAI
wins-server value 192.168.35.57
dns-server value 192.168.35.57
address-pools value PAIUSERS
webvpn
anyconnect firewall-rule client-interface public none
anyconnect firewall-rule client-interface private value vpn_dmz_access_in
anyconnect ask enable default anyconnect timeout 5
group-policy Anyconnect internal
: end

Check is the users fall into DfltGrpPolicy because it has no split tunneling active.
Michael
Please rate all helpful posts

IPSEC VPN Default Gateway

How do I configure 10.7 to either disable adding a default gateway for my VPN connecton or adjust the route metric so that my local gateway is preferred? I'd like to only use the VPN for traffic to specific networks.

I agree to Andrew's explanation. You can't change the vpn client gw to ASA ip not just because you want to change it as you said above.
Logically, what you are saying is not even making sense. The traffic is initiated from your VPN adapter which is a non-routable address on the internet. Moreover, to go encrypted, it has to be encapsulated to your client's public ip address which will then reach the local ISP gw, then to ISP and then taking other hops it would reach your ASA. By asking for your ASA's IP address as the gw for vpn client, you are somewhat asking to have some IP address on the internet to be your local VPN machine's IP address. Hence, this makes no sense.
bdw, by your statement,"already assigned to another device" are you saying that the 192.168.0.1 is already assigned to some other vpn device? if that's so that it does not matter, because the gw address that you see on vpn client machine is specific to that machine only.
Hope the other side of the explanation makes sense to you and clarifies your doubt.

VPN Client : Default Gateway

Hi,
I have ASA 5505 with ASA v 8.0.3 and ASDM v 6.0.3.
The VPN connection works, the client receive the IP from the define pool but the default gateway is not correct. Is it possible to define the gateway in the pool ?
thank you

Dimitri
I am not clear what default gateway you expected, what default gateway you got, or what was no correct about the gateway. Perhaps you can clarify?
In my experience many people are surprised that the gateway address is the clients own address and not some other address in the subnet as we normally expect with a LAN client. But this is normal behavior on what is essentially a point to point connection from the client to the concentrator. Is this perhaps what you were thinking was an error?
HTH
Rick

The Default Gateway Is Not Available / Problem

Hello, I recently purchased this HP Pavileon laptop, and I've been encountering this problem very often (every 2-10 minutes). This problem is getting extremely frustrating as absolutely nobody has been able to provide a fix for this issue.
When the laptop is on battery mode (this does not happen when plugged in); I commonly get disconnected from my wi-fi connection and to fix it, I must run the troubleshooter. This temporarily fixes the issue by resetting the wi-fi adapter.
What I have tried and has not worked:
* Turn off to save power option in the driver settings (in Device Manager) untickets
* Updated drivers
* New power plan
* Tried different drivers
* Complete system restore
The wireless adapter is Realtek RTL 8188EE. Upon running the troubleshooter, this is all the information from the detailed information section:
Windows Network Diagnostics
Publisher details
Issues foundThe default gateway is not available
The default gateway is not availableThe default gateway is a device that connects a local network or computer to the Internet. A broadband modem or router is usually the default gateway.
Fixed
Reset the "WiFi" adapter
Completed
Investigate router or broadband modem issues
Not run
Issues found
Detection details
6The default gateway is not availableFixed
The default gateway is a device that connects a local network or computer to the Internet. A broadband modem or router is usually the default gateway.
Reset the "WiFi" adapterCompleted
This can sometimes resolve an intermittent problem.
Network Diagnostics LogFile Name: 2D0FE1F0-C2C2-43B5-A857-2D2B3C4B8A51.Repair.1.etl Investigate router or broadband modem issuesNot run
If you're connected to a hotspot or domain network, contact the network administrator. Otherwise: 1. Unplug or turn off the device. 2. Once all the lights on the device are off, wait at least 10 seconds. 3. Turn the device on or plug it back in to the power outlet. To restart a router or modem that has a built-in battery, press and quickly release the Reset button.
Detection details
Diagnostics Information (Network Adapter)
Details about network adapter diagnosis:
Network adapter WiFi driver information:
Description . . . . . . . . . . : Realtek RTL8188EE 802.11b/g/n Wi-Fi Adapter
Manufacturer . . . . . . . . . : Realtek Semiconductor Corp.
Provider . . . . . . . . . . . : Realtek Semiconductor Corp.
Version . . . . . . . . . . . : 2012.2.827.2013
Inf File Name . . . . . . . . . : C:\WINDOWS\INF\oem8.inf
Inf File Date . . . . . . . . . : 12 September 2013 10:17:00
Section Name . . . . . . . . . : HP8188ee.ndi
Hardware ID . . . . . . . . . . : pci\ven_10ec&dev_8179&subsys_197d103c
Instance Status Flags . . . . . : 0x180200a
Device Manager Status Code . . : 0
IfType . . . . . . . . . . . . : 71
Physical Media Type . . . . . . : 9
Diagnostics Information (Wireless Connectivity)
Details about wireless connectivity diagnosis:
Information for connection being diagnosed
Interface GUID: 7c04789b-0b43-472c-abd6-a84cb31e9053
Interface name: Realtek RTL8188EE 802.11b/g/n Wi-Fi Adapter
Interface type: Native WiFi
Connection incident diagnosed
Auto Configuration ID: 1
Connection ID: 1
Connection status summary
Connection started at: 2014-07-24 04:19:49-759
Profile match: Success
Pre-Association: Success
Association: Success
Security and Authentication: Success
List of visible access point(s): 0 item(s) total, 0 item(s) displayed
Connection History
Information for Auto Configuration ID 1
List of visible networks: 1 item(s) total, 1 item(s) displayed
BSS Type PHY Security Signal(RSSI) Compatible SSID
Infra <unknown> Yes 100 Yes Matt
List of preferred networks: 1 item(s)
Profile: Matt
SSID: Matt
SSID length: 4
Connection mode: Infra
Security: Yes
Set by group policy: No
Connect even if network is not broadcasting: No
Connectable: Yes
Information for Connection ID 1
Connection started at: 2014-07-24 04:19:49-759
Auto Configuration ID: 1
Profile: Matt
SSID: Matt
SSID length: 4
Connection mode: Infra
Security: Yes
Pre-Association and Association
Connectivity settings provided by hardware manufacturer (IHV): No
Security settings provided by hardware manufacturer (IHV): No
Profile matches network requirements: Success
Pre-association status: Success
Association status: Success
Last AP: 98-fc-11-88-61-b8
Security and Authentication
Configured security type: WPA2-PSK
Configured encryption type: CCMP(AES)
802.1X protocol: No
Key exchange initiated: Yes
Unicast key received: Yes
Multicast key received: Yes
Number of security packets received: 0
Number of security packets sent: 0
Security attempt status: Success
Connectivity
Packet statistics
Ndis Rx: 34302
Ndis Tx: 32619
Unicast decrypt success: 0
Multicast decrypt success: 0
Unicast decrypt failure: 0
Multicast decrypt failure: 0
Rx success: 0
Rx failure: 0
Tx success: 0
Tx failure: 0
Tx retry: 0
Tx multiple retry: 0
Tx max lifetime exceeded: 0
Tx ACK failure: 0
Roaming history: 0 item(s)
Diagnostics Information (Wireless Connectivity)
Details about wireless connectivity diagnosis:
For complete information about this session see the wireless connectivity information event.
Helper Class: Auto Configuration
Initialise status: Success
Information for connection being diagnosed
Interface GUID: 7c04789b-0b43-472c-abd6-a84cb31e9053
Interface name: Realtek RTL8188EE 802.11b/g/n Wi-Fi Adapter
Interface type: Native WiFi
Result of diagnosis: There may be problem
Diagnostics Information (Wireless Network Adapter)
Details about wireless network adapter diagnosis:
For complete information about this session see the wireless connectivity information event.
Helper Class: Native WiFi MSM
Initialise status: Success
Information for connection being diagnosed
Interface GUID: 7c04789b-0b43-472c-abd6-a84cb31e9053
Interface name: Realtek RTL8188EE 802.11b/g/n Wi-Fi Adapter
Interface type: Native WiFi
Profile: Matt
SSID: Matt
SSID length: 4
Connection mode: Infra
Security: Yes
Connect even if network is not broadcasting: No
Result of diagnosis: There may be problem
Network Diagnostics LogFile Name: 2D0FE1F0-C2C2-43B5-A857-2D2B3C4B8A51.Diagnose.0.etl
Other Networking Configuration and LogsFile Name: NetworkConfiguration.cab Collection information Computer Name: LAPTOP Windows Version:6.3Architecture:x64Time:24 July 2014 04:34:47
Windows Network Diagnostics Detects problems with network connectivity. Package Version:1.0Publisher:Microsoft Windows

Run the HP Support Asssitant's Tune up application. There should be a new BIOS available. sp66866
Have you installed the latest Windows 8.1 updates?
Do not install optional video graphics updates.
I was runnning into a similar problem with my HP product loan Envy Spectre 13 TouchSmart Ultrabook until I did the updates. I had upgraded my wireless router to a model with 802.11AC specification.
Invoke the Device Manager and ensure that the box next to Allow this computer to turn off this device to save power is unchecked.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Windows 8.1 Pro Need command to disable "Use default gateway on remote network" option on VPN connection"

Hello!
I want to create bat script to create several VPN connection.
There is powershell command to create vpn connection:
add-vpnconnection -name "Test VPN" -serveraddress "vpn.example.com" -splittunneling -tunneltype "pptp"
And I need to create VPN connection without the option "Use default gateway on remote network" option on VPN connection"
Or modify this option on existent VPN connection with command.
Please help me to find command option or other command to disable "Use default gateway on remote network" option on VPN connection" feature.

http://technet.microsoft.com/nl-nl/library/ee431701%28v=ws.10%29.aspx RouteIPv4TrafficOverRAS True – Add a default gateway on the VPN connection False – Do not add default gateway on the VPN connection

Giving up default gateway in Solaris 10

Good Morning !!!
Hi ..
could you tell me, how can i add default gateway in solaris 10?
i mean , i wanted give up as follows:
rute add default 100.110.120.130
but it does not work !!
Thanks.

Could you post the output from what you're doing? This because beside the typo the following command should work when your root.
route add default 100.110.120.130 Another option is the following command, but then you need to reboot the system afterwards.
echo "100.110.120.130" > /etc/defaultrouter

How to setup default gateway in a DHCP client. The default gateway will be the Ip address of the server that has RRAS installed, hence routing cabalities.

How to setup default gateway in a DHCP client. The default gateway will be the Ip address of the server that has RRAS installed, hence routing cabalities.

Hi Bill,
Thank you for replying back...Yes, I was actually asking how do you set the default gateway address on the DHCP server?,
I believe I got the answer below:
To configure the DHCP default gateway option Click Start, point to Administrative Tools and then click DHCP. In the console tree, expand the applicable DHCP server, expand IPv4, and then right-click Scope Options Click Configure Options, check 003
Router, type the applicable Server name and IP address, and then click OK.
Thank you

Loss of default gateway - to auto-shutdown radio

Hi,
I need a solution where, if an access point looses its connection to its default gateway, that it automatically shuts the radio down. And when the default gateway is again available, the radio is automatically turned on again. By connection, I do not just mean that the AP FastEthernet port link status changes.
Some kind of functionality like the 'track rtr reachability' that probes the default gateway, and takes action if the default gateway cannot be reached.
How to, if at all possible...
Problem is that wireless equipment will connect to the access point if the radio is up but the access point does not have access to its default gateway (for some error reason other than the local Ethernet link, but also that...)
Thanks
Johnny

Hi,
unfortunately that does not solve this problem:
Router (def. gw for WAP)
Switch 1
Switch 2
Wireless Access Point (WAP)
If switch 1 is down or if the link from switch 1 to the router is down, then the WAP radio will still be up. I need for it to handle a loss to its default gateway, not just its local ethernet wire.
Tx
Johnny

Changing Router IP while keeping default Gateway

Hello- I have a Linksys WRT150N Wireless Router. The default (out of the box) IP Address is 192.168.1.1, which is also the default Gateway. I would like to know if it is possible to change the IP address to 192.168.1.2 while keeping the Gateway on 192.168.1.1. The problem I run into is that when I do change the IP to 192.168.1.2, the Gateway also changes to that address. I see it is possible under Automatic Configuration - DHCP to change the IP and the Subnet Mask, but not the Gateway. Any ideas? Thank you
Message Edited by thutter on 05-20-2008 05:36 AM

No it won't be possible for you to do the settings i.e., to change the ip address to 192.168.1.2...better keep in the same & do the settings.

Changing default gateway on sbs08

Hello,
I need to change the default gateway on my small business server 2008 from 192.168.1.207 to 192.168.1.208. The server is used for exchange 2007 and pretty much runs our network.
My manager said this is a big job and I need to read up on DNS, MX records and changing SMTP server IP addresses but I cant see what else I would
need to do.
Any help is greatly appreciated!
Thanks!

Hi Nuh,
If you are just looking to change just the gateway IP address, then FOVIA is correct. Just run the Connect to Internet Wizard. For all intensive purposes, your gateway is your firewall or router. Ex. below.
IP Address: 192.168.1.2 <-This is IP address for the server
Subnet: 255.255.255.0
Default Gateway: 192.168.1.207 <- This is the IP address for your gateway, the one that you need to change.
Now, if you manager is asking you to change physically change the gateway(firewall/router) and reconfigfure it and the network, then this "big job" does make sense when dealing DNS, MX records and such. If not, then just run the wizard and you should be
gold.

Use of default gateway on switch

hi,
there is option to specify default gateway on switch.
what is the purpose of it?
Regards
skrao

Hi,
Layer 2 switches have to be configured like IP hosts, which are not capable of routing. In the same manner that you assign default gateways to hosts, you need to assign a default gateway to such a L2 switch so that management traffic from the switch can be routed to the gateway router.
Pls do remember to rate posts.
Paresh

Setting up IP,Subnet, default gateway and secondary gateway in solaris 10 x

Hi,
I am new to solaris.
I have instralled solaris10 x86 on my system.
I am not able to access internet as i am not able to setup address.
I use broadband and have static ip address.
How do i configure them...
ip, subnet, default gateway, and secondary gateway.
Thanks in advance.

run sys-unconfig and after reboot set the parameters (IP, etc)
What do you mean second gateway?

Default Gateway doesn't work when entered in address bar

I'm trying to get to my router's settings. The default IP address of my router (192.168.1.1) doesn't work when I enter it in the address bar. Neither does the Default Gateway that I got from clicking on start, run, typing cmd and then ipconfig/all. Does anybody know how I can access my router settings without resetting it?

That seems to be the modem default gateway... is your PC connected to the modem via a USB cable? (sometimes that might be the case)... or what port of the router is your modem connected to?

ASA default gateway

Similar Messages

Maybe you are looking for