ASMLIB KERNEL DRIVER FOR SLES9
Oracle 10g is now certified with SLES9. Where can the asmlib for SLES9 be downloaded
Thanks
Alan
user12144220 wrote:
Hello everyone, please help to find out correct asmlib kernel driver ?
rpm -ivh oracleasmlib-2.0.4-1.el5.x86_64.rpm
error: Failed dependencies:
oracleasm >= 1.0.4 is needed by oracleasmlib-2.0.4-1.el5.x86_64
My kernel version is:
uname -a
Linux 2.6.18-238.el5xen #1 SMP Tue Jan 4 16:15:36 EST 2011 x86_64 x86_64 x86_64 GNU/Linux
Thank you.uname -rm
you can find the exact oracleasmlib for your version
eg:- my system Intel IA64 Architecture
Library and Tools
* oracleasm-support-2.1.7-1.el5.ia64.rpm
* oracleasmlib-2.0.4-1.el5.ia64.rpm
and then search(control +F) for 2.6.18-238.el5
refer this link:-http://www.oracle.com/technetwork/server-storage/linux/downloads/rhel5-084877.html
Similar Messages
-
Please help to find out asmlib kernel driver ?
Hello everyone, please help to find out correct asmlib kernel driver ?
rpm -ivh oracleasmlib-2.0.4-1.el5.x86_64.rpm
error: Failed dependencies:
oracleasm >= 1.0.4 is needed by oracleasmlib-2.0.4-1.el5.x86_64
My kernel version is:
uname -a
Linux 2.6.18-238.el5xen #1 SMP Tue Jan 4 16:15:36 EST 2011 x86_64 x86_64 x86_64 GNU/Linux
Thank you.user12144220 wrote:
Hello everyone, please help to find out correct asmlib kernel driver ?
rpm -ivh oracleasmlib-2.0.4-1.el5.x86_64.rpm
error: Failed dependencies:
oracleasm >= 1.0.4 is needed by oracleasmlib-2.0.4-1.el5.x86_64
My kernel version is:
uname -a
Linux 2.6.18-238.el5xen #1 SMP Tue Jan 4 16:15:36 EST 2011 x86_64 x86_64 x86_64 GNU/Linux
Thank you.uname -rm
you can find the exact oracleasmlib for your version
eg:- my system Intel IA64 Architecture
Library and Tools
* oracleasm-support-2.1.7-1.el5.ia64.rpm
* oracleasmlib-2.0.4-1.el5.ia64.rpm
and then search(control +F) for 2.6.18-238.el5
refer this link:-http://www.oracle.com/technetwork/server-storage/linux/downloads/rhel5-084877.html -
Custom PCI Device Driver for Phar Lap
Hi all,
I have deployed Labview Real-Time to a compact-PCI card in a cPCI chassis (non-NI brand for several unavoidable reasons). I need to do high-speed communication with another card in the chassis at minimum rates of 20 MB/s read, 4MB/s write - but preferably much higher. After extensive testing, we believe that NI VISA is incapable of maintaining those speeds in our system, and it barely maintains half those (side note: the hardware is more than capable as we have deployed embedded software that easily achieved the desired data rates).
Another engineer is responsible for finding ways to optimize VISA. The purpose of this post is to explore the option of writing a custom kernel driver for Phar Lap 2013 in C to handle communication with the other card. I have experience in writing windows kernel drivers, but the NI documentation for Phar Lap is severely lacking in this area.
So the overarching questions are:
1- Is it possible to do this?
2- If so, is it possible to use LabWindows/CVI to do this?
Any and all input is appreciated. ThanksHi:
Yes, it does.
You need this driver for the PCI Device.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-79371-2&cc=us&dlc=en&lc=en&... -
Macbook 4,1
Early 2008 15" macbook pro
Running Snow Leopard
the Battery was not working after only 23 cycles
I tried the Battery update and now it will not boot at all
I really do not want to loose my data on the drive
panic message is
Unable to find driver for this platform: "ACPI".\n"@/SourceCache/xnu/xnu-1228/iokit/Kernel/IOPlatformExpert.cpp:1378
Please helpPanic Message
panic(cpu 0 caller 0x000x563ebd) : Unable to find driver for this platform:
"ACPI".\n"@/SourceCache/xnu/xnu-1228/iokit/Kernel/IOPlatformExpert.cpp:1378
Debugger called: <panic>
Backtrace (CPU 0), Format - Frame : Return Address (4 potential args on stack)
(7 lines of hex)
BSD Process name corresponding to current thread: Unkonwn
Kernel version:
Darwin Kernel Version 10.8.0" todays date ; root:xnu-1504.15.3~1/release_I386
I tried to boot from CD can, but i dont want to loose any information.
Tried disk tools
Hardware test
Tried to check if it was memory sticks failing or battery , nothing else plugged in
if i boot holding Apple key and S
I get additional warnings about AppleACPIPlatform and not being able to load Kext -
Kernel Panic: Unable to find driver for this platform
So, my 1 GM RM, 1.5 GHz Powerbook G4 (15 inches) has been behaving wonderfully lately. Until, this morning, it locked up -- as it sometimes does -- after inserting a 3rd party SATA card and waking it from sleep.
This is normally not a problem. A reboot gets things back on track. Not today. The reboot stayed on the grey screen with the white apple logo. I tried booting off of a Disk Warrior CD and an OS X 10.4 install DVD. I go this kernel panic:
Unable to find driver for this platform: "PowerBook5,6".
But...and here's the best part...if I boot into target disk mode and hook the computer up to another similar Powerbook we have, the similar PowerBook boots fine using my drive.
So, it seems to be a hardware problem with my PowerBook. Any ideas on how I narrow it down?
Thanks,
GaryGlad you found your problem. Our kernel panic on our 15" G4 is a bad logic board. $500+ to fix it. Just found out yesterday.
JWTech -
Kernel Panic for a powerbook driver, but i have an ibook...
I was having trouble with my Finder in 10.2.8 so I was told to get a 10.3 disc to do the Archive and Install feature. I got a hold of the discs and went to do the install and a Kernel Panic popped up. Here's a copy of it:
Panic(cpu 0): Unable to find driver for this platform: “Powerbook2,1”.
Latest stack backtrace ro cpu0:
Backtrace:
0x000833b8 0x0008389c 0x0001ed8c 0x0026da4c 0x0024de04 0x0024dbdc 0x0024e658 0x0024eccc 0x0023ee84 0x0023ee48
Proceeding back via exception chain:
Exception state (sv=0x00495c80)
PC=0x00000000; MSR=0x0000d030; DAR=0x00000000; DSISR=0x00000000; LR=0x00000000; R1=0x00000000; XCP=0x00000000 (Unknown)
I went to Dr. Smoke's website and figured out that it's a problem with the System folder. My questions are: a) does this have anything to do with my finder problem in 10.2.8? and b) why does the powerbook divers matter if I have an ibook clamshell?Mike--
Sounds to me like you got hold of 10.3 discs for a specific PowerBook, not the a universal installer, or the 10.3 discs for your particular iBook.
As a general rule here's how it goes: you can't use the installation/restore discs that came with a particular Macintosh with another model Macintosh. It doesn't have all the drivers. For example, a PowerBooks' disc would have different drivers for fans, etc., than would the disc for an iMac G5. However, if you can find Panther retail discs, then you'd be fine, as the retail versions would have the proper drivers for all compatible Macintoshes that were released before it.
As to why it says "Powerbook2,1", at that low of a level, the kernel sees portables as Powerbooks. They use the same logic more or less on the desktop Macs, where the iMacs and Power Macs are both "PowerMacN,N" with the Ns distinguishing between models. The Rev. A iMac G5 is PowerMac8,1.
This isn't necessarily so, by the way, for the Intel Macs, where so far the strings are a bit more specific...
charlie -
Need to compile nvidia driver for a custom kernel [SOLVED]
I compiled a custom kernel following this wiki page: http://wiki.archlinux.org/index.php/Ker … rom_Source
I can boot into it just fine. I now want to compile an nvidia driver for use with it and followed the steps on this wiki page: http://wiki.archlinux.org/index.php/NVI … tom_kernel
I run into a problem when makepkg trys to compile it. Here is the output:
$ cd ~/devel/abs/nvidia/
$ makepkg -c
==> Making package: nvidia-my 190.42-1 x86_64 (Thu Nov 5 17:42:29 EST 2009)
==> Checking Runtime Dependencies...
==> Checking Buildtime Dependencies...
==> Retrieving Sources...
-> Found NVIDIA-Linux-x86_64-190.42-pkg0.run in build dir
==> Validating source files with md5sums...
NVIDIA-Linux-x86_64-190.42-pkg0.run ... Passed
==> Extracting Sources...
==> Entering fakeroot environment...
==> Starting build()...
Creating directory NVIDIA-Linux-x86_64-190.42-pkg0
Verifying archive integrity... OK
Uncompressing NVIDIA Accelerated Graphics Driver for Linux-x86_64 190.42..................................................................................................................................................
If you are using a Linux 2.4 kernel, please make sure
you either have configured kernel sources matching your
kernel or the correct set of kernel headers installed
on your system.
If you are using a Linux 2.6 kernel, please make sure
you have configured kernel sources matching your kernel
installed on your system. If you specified a separate
output directory using either the "KBUILD_OUTPUT" or
the "O" KBUILD parameter, make sure to specify this
directory with the SYSOUT environment variable or with
the equivalent nvidia-installer command line option.
Depending on where and how the kernel sources (or the
kernel headers) were installed, you may need to specify
their location with the SYSSRC environment variable or
the equivalent nvidia-installer command line option.
*** Unable to determine the target kernel version. ***
make: *** [select_makefile] Error 1
==> ERROR: Build Failed.
Aborting...
The step it's choking on is (from the PKGBUILD), "make SYSSRC=/lib/modules/${_kernver}/build module || return 1"
What am I doing wrong?
My PKGBUILD:
pkgname=nvidia-my
pkgver=190.42
_kernver='2.6.32-rc6-MINE'
pkgrel=1
pkgdesc="NVIDIA drivers for kernel26."
arch=('i686' 'x86_64')
[ "$CARCH" = "i686" ] && ARCH=x86
[ "$CARCH" = "x86_64" ] && ARCH=x86_64
url="http://www.nvidia.com/"
depends=('kernel26>=2.6.31' 'kernel26<2.6.32' "nvidia-utils=${pkgver}")
conflicts=('nvidia-96xx' 'nvidia-173xx')
license=('custom')
install=nvidia.install
source=("http://download.nvidia.com/XFree86/Linux-$ARCH/${pkgver}/NVIDIA-Linux-$ARCH-${pkgver}-pkg0.run")
md5sums=('f94806feee87de756d14fe3e9bcaf05a')
[ "$CARCH" = "x86_64" ] && md5sums=('ae431ff849ec01446e6724f9fcfe3bb4')
build() {
cd $srcdir
sh NVIDIA-Linux-$ARCH-${pkgver}-pkg0.run --extract-only
cd NVIDIA-Linux-$ARCH-${pkgver}-pkg0
cd usr/src/nv/
ln -s Makefile.kbuild Makefile
make SYSSRC=/lib/modules/${_kernver}/build module || return 1
mkdir -p $pkgdir/lib/modules/${_kernver}/kernel/drivers/video/
install -m644 nvidia.ko $pkgdir/lib/modules/${_kernver}/kernel/drivers/video/
sed -i -e "s/KERNEL_VERSION='.*'/KERNEL_VERSION='${_kernver}'/" $startdir/nvidia.install
My nvidia.install
post_install() {
KERNEL_VERSION='2.6.32-rc6-MINE'
depmod $KERNEL_VERSION
post_upgrade() {
post_install
rmmod nvidia || echo 'In order to use the new nvidia module, exit Xserver and unload it manually.'
post_remove() {
KERNEL_VERSION='2.6.32-rc6-MINE'
depmod $KERNEL_VERSION
Last edited by graysky (2009-11-07 10:54:33)Hello,
I'm kind of a noob and am trying to get follow the directions from the Nvidia wiki on installing on a custom kernel. I'm trying to use the abs method to install on kernel26rt version 2.6.33rt. I followed directions exactly and am getting an error that I didn't find on any other posts. Can you please take a look? Here is my terminal:
[jsadural@jlinux nvidia]$ makepkg -ci
==> Making package: nvidia-2633rt 270.30-3 (Wed Mar 30 08:53:08 PDT 2011)
==> Checking runtime dependencies...
==> Checking buildtime dependencies...
==> Retrieving Sources...
-> Downloading NVIDIA-Linux-x86_64-270.30-no-compat32.run...
--2011-03-30 08:53:08-- ftp://download.nvidia.com/XFree86/Linux … mpat32.run
=> “NVIDIA-Linux-x86_64-270.30-no-compat32.run.part”
Resolving download.nvidia.com... 69.31.121.43
Connecting to download.nvidia.com|69.31.121.43|:21... connected.
Logging in as anonymous ... Logged in!
==> SYST ... done. ==> PWD ... done.
==> TYPE I ... done. ==> CWD (1) /XFree86/Linux-x86_64/270.30 ... done.
==> SIZE NVIDIA-Linux-x86_64-270.30-no-compat32.run ... 30037601
==> PASV ... done. ==> RETR NVIDIA-Linux-x86_64-270.30-no-compat32.run ... done.
Length: 30037601 (29M) (unauthoritative)
100%[======================================>] 30,037,601 696K/s in 42s
2011-03-30 08:53:50 (696 KB/s) - “NVIDIA-Linux-x86_64-270.30-no-compat32.run.part” saved [30037601]
==> Validating source files with md5sums...
NVIDIA-Linux-x86_64-270.30-no-compat32.run ... Passed
==> Extracting Sources...
==> Starting build()...
Creating directory NVIDIA-Linux-x86_64-270.30-no-compat32
Verifying archive integrity... OK
Uncompressing NVIDIA Accelerated Graphics Driver for Linux-x86_64 270.30........................................................................................................................
NVIDIA: calling KBUILD...
test -e include/generated/autoconf.h -a -e include/config/auto.conf || ( \
echo; \
echo " ERROR: Kernel configuration is invalid."; \
echo " include/generated/autoconf.h or include/config/auto.conf are missing.";\
echo " Run 'make oldconfig && make prepare' on kernel src to fix it."; \
echo; \
/bin/false)
mkdir -p /home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/.tmp_versions ; rm -f /home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/.tmp_versions/*
make -f scripts/Makefile.build obj=/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel
cc -Wp,-MD,/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/.nv.o.d -nostdinc -isystem /usr/lib/gcc/x86_64-unknown-linux-gnu/4.5.2/include -I/usr/src/linux-2.6.33-rt/arch/x86/include -Iinclude -include include/generated/autoconf.h -D__KERNEL__ -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs -fno-strict-aliasing -fno-common -Werror-implicit-function-declaration -Wno-format-security -fno-delete-null-pointer-checks -O2 -m64 -mtune=generic -mno-red-zone -mcmodel=kernel -funit-at-a-time -maccumulate-outgoing-args -fstack-protector -DCONFIG_AS_CFI=1 -DCONFIG_AS_CFI_SIGNAL_FRAME=1 -pipe -Wno-sign-compare -fno-asynchronous-unwind-tables -mno-sse -mno-mmx -mno-sse2 -mno-3dnow -Wframe-larger-than=2048 -fomit-frame-pointer -Wdeclaration-after-statement -Wno-pointer-sign -fno-strict-overflow -fno-dwarf2-cfi-asm -fconserve-stack -I/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel -Wall -MD -Wsign-compare -Wno-cast-qual -Wno-error -D__KERNEL__ -DMODULE -DNVRM -DNV_VERSION_STRING=\"270.30\" -Wno-unused-function -mcmodel=kernel -mno-red-zone -UDEBUG -U_DEBUG -DNDEBUG -DMODULE -D"KBUILD_STR(s)=#s" -D"KBUILD_BASENAME=KBUILD_STR(nv)" -D"KBUILD_MODNAME=KBUILD_STR(nvidia)" -c -o /home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv.o /home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv.c
In file included from /usr/src/linux-2.6.33-rt/arch/x86/include/asm/uaccess.h:573:0,
from include/linux/poll.h:13,
from /home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv-linux.h:84,
from /home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv.c:13:
/usr/src/linux-2.6.33-rt/arch/x86/include/asm/uaccess_64.h: In function ‘copy_from_user’:
/usr/src/linux-2.6.33-rt/arch/x86/include/asm/uaccess_64.h:35:6: warning: comparison between signed and unsigned integer expressions
In file included from /home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv.c:13:0:
/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv-linux.h: At top level:
/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv-linux.h:251:35: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘nv_spinlock_t’
/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv-linux.h:1436:5: error: expected specifier-qualifier-list before ‘nv_spinlock_t’
/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv.c: In function ‘nv_alloc_file_private’:
/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv.c:1993:5: error: implicit declaration of function ‘semaphore_init’
/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv.c:1994:5: error: ‘nv_file_private_t’ has no member named ‘waitqueue’
/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv.c:1995:5: error: implicit declaration of function ‘atomic_spin_lock_init’
/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv.c:1995:5: error: ‘nv_file_private_t’ has no member named ‘fp_lock’
/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv.c: In function ‘nv_kern_poll’:
/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv.c:2790:30: error: ‘nv_file_private_t’ has no member named ‘waitqueue’
/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv.c:2793:5: error: implicit declaration of function ‘atomic_spin_lock_irqsave’
/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv.c:2793:5: error: ‘nv_file_private_t’ has no member named ‘fp_lock’
/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv.c:2804:5: error: implicit declaration of function ‘atomic_spin_unlock_irqrestore’
/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv.c:2804:5: error: ‘nv_file_private_t’ has no member named ‘fp_lock’
/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv.c: In function ‘nv_kern_close_registry’:
/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv.c:3595:18: error: ‘nv_file_private_t’ has no member named ‘off’
/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv.c:3611:22: error: ‘nv_file_private_t’ has no member named ‘off’
/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv.c: In function ‘nv_kern_write_registry’:
/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv.c:3703:51: error: ‘nv_file_private_t’ has no member named ‘off’
/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv.c:3710:45: error: ‘nv_file_private_t’ has no member named ‘off’
/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv.c:3720:9: error: ‘nv_file_private_t’ has no member named ‘off’
/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv.c: In function ‘nv_post_event’:
/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv.c:4330:5: error: ‘nv_file_private_t’ has no member named ‘fp_lock’
/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv.c:4347:5: error: ‘nv_file_private_t’ has no member named ‘waitqueue’
/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv.c:4348:5: error: ‘nv_file_private_t’ has no member named ‘fp_lock’
/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv.c: In function ‘nv_get_event’:
/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv.c:4362:5: error: ‘nv_file_private_t’ has no member named ‘fp_lock’
/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv.c:4365:9: error: ‘nv_file_private_t’ has no member named ‘fp_lock’
/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv.c:4390:5: error: ‘nv_file_private_t’ has no member named ‘fp_lock’
make[3]: *** [/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv.o] Error 1
make[2]: *** [_module_/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel] Error 2
NVIDIA: left KBUILD.
nvidia.ko failed to build!
make[1]: *** [module] Error 1
make: *** [module] Error 2
==> ERROR: A failure occurred in build().
Aborting...
thanks,
jason -
UCS B-series :enic driver version 2.1.1.41 is causing kernel panic for RHEL5.7
The enic driver version 2.1.1.41 which comes with driver iso ucs-bxxx-drivers.2.1.1a is resulting in Kernel panic for RHEL5.7
When RHEL5.7 OS is installed, the kernel version that gets loaded with the iso that I have is 2.6.18-274.el5 x86_64 whereas the kernel version expected by the enic driver provided by Cisco is 2.6.18-164.el5(supported distribution). The Cisco documentation says : If kernel version does not match, the enic RPM cannot be installed.
The enic driver that comes with OS is ver 2.1.1.9 whereas the one Cisco provides is ver 2.1.1.41 . The system crashes for non-matching distribution after loading the driver version 2.1.1.41 .Here are some other details:
root@rhel57 cisco]# rpm -ivh kmod-enic-rhel5u7-2.1.1.41-1.0.x86_64.rpm
Preparing... ########################################### [100%]
1:kmod-enic-rhel5u7 ########################################### [100%]
[root@rhel57 cisco]# rpm -qa | grep enic
kmod-enic-rhel5u7-2.1.1.41-1.0
[root@rhel57 cisco]# /sbin/lsmod | grep enic
enic 79425 0
8021q 58321 2 cxgb3,enic
Thanks,
Yogesh -
I installed the 829mb Apple software update on my 2011 Macbook Pro. Upon restart, it crashed. It instructed me to hold power button to shut off and then press again to restart. Same error message keeps coming up and computer won't boot to home screen.
Error message:
Panic CPU 0 caller 0xffffff800064ba7b Unable to find driver for this platform \"acpi"\\n"@/sourcecache/xnu/xnu-1699.26.8/iokit/kernel/10platform
\"acpi"\\n"@/sourcecache/xnu/xnu-1699.26.8/iokit/kernel/10platformexpert.cpl:150 4
Debugger called panic
Kernal uuid a8ed611fb0f-3729-8392-e7a32c5e7d74
THANKS FOR ANY HELP.
ROBBBoot into Recovery by holding down the key combination command-R at the startup chime. Release the keys when you see a gray screen with a spinning dial.
Note: You need an always-on Ethernet or Wi-Fi connection to the Internet to use Recovery. It won’t work with USB or PPPoE modems, or with networks that require any kind of authentication other than a WPA or WPA2 Personal password.
When the Mac OS X Utilities screen appears, follow the prompts to reinstall the Mac OS. You don't need to erase the boot volume, and you won't need your backup unless something goes wrong. If your Mac didn’t ship with Lion, you’ll need the Apple ID and password you used to upgrade, so make a note of those before you begin.
Don't install the Thunderbolt update -- it's defective. -
Broadcom netXtreme 57xx Gigabit C driver for 2.4.28 kernel
Received some Dell Latitude D820 laptops with integrated Broadcom
netXtreme 57xx Gigabit C NICs.
Does any one know where I can get or have a compiled driver for Novell
Linux Kernel 2.4.28?
Thanks,
Jody Barber
City of MississaugaOn Thu, 27 Jul 2006 17:09:32 GMT, [email protected] wrote:
> Does any one know where I can get or have a compiled driver for Novell
> Linux Kernel 2.4.28?
did you check forge?
If you have already compiled drivers or have linux.2 please put them on
http://forge.novell.com/modules/xfmo...ect/?zfdimgdrv
Live BootCd and USB Disk from Mike Charles
http://forge.novell.com/modules/xfmod/project/?imagingx
eZie http://forge.novell.com/modules/xfmod/project/?ezie
Marcus Breiden
If you are asked to email me information please change -- to - in my e-mail
address.
The content of this mail is my private and personal opinion.
http://www.edu-magic.net -
Compiling nvidia driver for custom kernel
I have a Toshiba M200 tablet PC running Arch Linux (which I love, btw) and it's running fine, including the tablet.
There's an irritating bug with suspend-to-ram (suspend-to-disk doesn't work with the nvidia driver) where the tablet pen stops working after resume.
There's a patch slated to be in some future kernel, but I compiled my own with that patch included. It boots fine and all seems to be well with it.
However, I need to compile the nvidia driver for it, since the binary does not work. So I copy /var/abs/extra/nvidia and modify the PKGBUILD and nvidia.install files per the instructions on this wiki page, and run makepkg -i -c .
I get a big error message early on, saying
If you are using a Linux 2.4 kernel, please make sure
you either have configured kernel sources matching your
kernel or the correct set of kernel headers installed
on your system.
If you are using a Linux 2.6 kernel, please make sure
you have configured kernel sources matching your kernel
installed on your system. If you specified a separate
output directory using either the "KBUILD_OUTPUT" or
the "O" KBUILD parameter, make sure to specify this
directory with the SYSOUT environment variable or with
the equivalent nvidia-installer command line option.
Depending on where and how the kernel sources (or the
kernel headers) were installed, you may need to specify
their location with the SYSSRC environment variable or
the equivalent nvidia-installer command line option.
*** Unable to determine the target kernel version. ***
I've checked everything I can think of.
$ uname -r
2.6.25-tablet
ls -l /usr/src shows linux-2.6.25-tablet, and linux is a symlink to it. /lib/modules/2.6.25-tablet/build is also symlinked to the right kernel source tree.
So I'm out of ideas for why the nvidia makefile can't seem to find the kernel source.
Thanks in advance.@klixon:
I think that may be the root of the trouble: I compiled the kernel on my desktop (C2D 2.8) rather than my wussy laptop (1.6 Centrino). It installed and ran fine and all that, but I only have the kernel source tree that was included in the package, not the one that really compiled the code. Would simply copying it suffice, or should I rebuild the kernel on my laptop? Also, the PKGBUILD is included below.
@shazeal:
I believe this is a subset of the problem I describe above?
The PKGBUILD, somewhat customized from the nvidia ABS. I don't think any of the changes are overly shocking.
I've tried dozens of different modifications of it now. The simplest one is just appending '-tablet' to pkgname and _kernver.
# $Id: PKGBUILD 1567 2008-05-13 10:11:25Z thomas $
# Maintainer : Thomas Baechler <[email protected]>
pkgname=nvidia-tablet
pkgver=169.12
_kernver='2.6.25-tablet'
pkgrel=4
pkgdesc="NVIDIA drivers for kernel26."
arch=('i686')
ARCH=x86
url="http://www.nvidia.com/"
depends=('kernel2625-tablet' 'nvidia-utils')
conflicts=('nvidia-96xx' 'nvidia-71xx' 'nvidia-legacy')
license=('custom')
install=nvidia.install
source=(http://us.download.nvidia.com/XFree86/Linux-$ARCH/${pkgver}/NVIDIA-Linux-$ARCH-${pkgver}-pkg0.run
NVIDIA_kernel-169.12-2286310.diff)
md5sums=('e7aaca79c846e34cfe8111040bfee2d0'
'a6b6d9d7ff0306343be3fa40e72337fd')
[ "$CARCH" = "x86_64" ] && md5sums=('843a1e8bc1923ba2e4b60f6fab31ad3b'
'a6b6d9d7ff0306343be3fa40e72337fd')
build()
# Extract
cd $startdir/src/
sh NVIDIA-Linux-$ARCH-${pkgver}-pkg0.run --extract-only
cd NVIDIA-Linux-$ARCH-${pkgver}-pkg0
# Any extra patches are applied in here...
patch -Np0 -i ../NVIDIA_kernel-169.12-2286310.diff || return 1
cd usr/src/nv/
ln -s Makefile.kbuild Makefile
make SYSSRC=/usr/src/linux module || return 1
# install kernel module
mkdir -p $startdir/pkg/lib/modules/${_kernver}/kernel/drivers/video/
install -m644 nvidia.ko $startdir/pkg/lib/modules/${_kernver}/kernel/drivers/video/
sed -i -e "s/KERNEL_VERSION='.*'/KERNEL_VERSION='${_kernver}'/" $startdir/*.install -
How to get source code for WinCE 6.0 USB Camera Driver for ARM4I Processor
Hi,
I am implementing USB camera driver for my mini2440 board which has an ARM4I processor. The sample code
"Windows Embedded CE 6.0 USB camera Driver" downloaded from:
http://www.microsoft.com/downloads/en/details.aspx?FamilyID=2ef087c0-a4ae-42cc-abd0-c466787c11f2
does not support ARM4I processors. When trying to generate in VS2005 Platform Builder my WinCE 6.0
image for mini2440 with the Third party catalog items "MJPEG Decompression Filter" and "USB CameraDriver",
the linker giver errors. Please advise where to find a working source code for USB (now revision 1.1
("full-speed") is supported in my WinCE 6.0 image) camera for my ARM4I processor. The code should
be in C# but C++ will be fine also.
Thanks,
Pauli get this on the hyperterminal when i run the cameradshowapp.exe
Compulab Windows CE NAND X-Loader for CM-T35
Built Dec 20 2009 at 16:48:16
Version 1.01.222
Commit Date 16/12/09
Jumping to bootloader
Microsoft Windows CE Bootloader Common Library Version 1.4 Built Dec 20 2009 16:
46:16
INFO:OALLogSetZones: dpCurSettings.ulZoneMask: 0x200b
Texas Instruments Windows CE EBOOT for CM-T35, Built Dec 20 2009 at 16:48:10
Version 1.01.222
OMAP3430 Version 0x4b7ae02f (Unknown)
TPS659XX Version 0x10 (ES2.x)
-OEMPinMuxSetup....
System ready!
Preparing for download...
INFO: Predownload
+FMD_Init
Checking bootloader blocks are marked as reserved (Num = 6)
+FMD_Init
WARN: Boot config wasn't found, using defaults
+FMD_Init
OALFlashStoreOpen: 4096 blocks, 64 sectors/block
OALFlashStoreOpen: 2048 bytes/sector, 14 reserved blocks
Calling LCD_TurnOn
+FMD_Init
+FMD_Init
BLConfigureFlashPartitions: dwBootPartitionSectorCount = 0x5fff, partition actua
l size =0x4d3a!!!
Hit space to enter configuration menu 5...
Hit space to enter configuration menu 4...
Hit space to enter configuration menu 3...
Hit space to enter configuration menu 2...
Hit space to enter configuration menu 1...
INFO: Boot Device location = 0x8000020
Load NK image from flash memory
+FMD_Init
ROMHDR (pTOC = 0x823b8c28) ---------------------
DLL First : 0x4001c001
DLL Last : 0x41c7c0d8
Physical First : 0x84001000
Physical Last : 0x863bbdec
Num Modules : 294
RAM Start : 0x863c0000
RAM Free : 0x863d5000
RAM End : 0x90800000
Num Copy Entries
Copy Entries Offset : 0x85256e38
Prof Symbol Length : 0x00000000
Prof Symbol Offset : 0x00000000
Num Files : 116
Kernel Flags : 0x00000002
FileSys RAM Percent : 0x00000020
Driver Glob Start : 0x00000000
Driver Glob Length : 0x00000000
CPU : 0x01c2
MiscFlags : 0x0002
Extensions : 0x84002020
Tracking Mem Start : 0x00000000
Tracking Mem Length : 0x00000000
NK Image Loaded
Launch Windows CE image by jumping to 0x80001000...
Windows CE Kernel for ARM (Thumb Enabled) Built on Apr 5 2011 at 17:47:22
+OEMInit
ýSETDATAOUT access is OK....
Forcing clean boot
MainMemoryEndAddress = 0x90800000
-OEMInit
+FMD_Init
Dumping registry defined VK
Row 0: 0x18 0x9 0x25 0x0 0x0 0x0
Row 1: 0x26 0xd 0x28 0x0 0x0 0x0
Row 2: 0x27 0x24 0x23 0x0 0x0 0x0
Row 3: 0x0 0x0 0x0 0x0 0x0 0x0
Row 4: 0x0 0x0 0x0 0x0 0x0
Row 5: 0x0 0x0 0x0 0x0 0x0 0x0
SMSC922x: Core Ethernet Init.
Lan9220 identified. ID_REV = 0x92200000
SMSC922x: MAC address = 00:01:c0:0a:a0:db
Lan9220 identified. ID_REV = 0x92200000
SMSC922x: MAC address = 00:01:c0:09:88:80
SDIO8686: Loading Driver [version = 38.p44]
SDIO8686: Reset with TPS GPIO 2 --> done
!!!Kernel mode PSL 'PRdr' de-registered!!!
!!!Kernel mode PSL 'HRdr' de-registered!!!
!!!Kernel mode PSL 'FRdr' de-registered!!!
EHCI USB Host: HcdPdd_Init+
[OTG] OMAPMHSUSBOTG::Init()+
OMAPMHSUSBOTG::PostInit(): Start.
DSPLINK Module (1.61.04) created on Date: Jun 24 2009 Time: 16:30:52
Display parameters:
Height = 0x280
Width = 0x1e0
HSW = 0x20
HFP = 0x8
HBP = 0x17
VSW = 0x1
VFP = 0x4
VBP = 0x3
DVI is not enabled
PixelClkDiv = 0x7
LogClkDiv = 0x1
ClkSelDSS = 0x5
TD035:: LCDTurnOn
TD035STEE1: Turned display on.
TD035:: Finished LCD VGA init
AUTOLAUNCH: Checking HKEY_LOCAL_MACHINE\Startup key for programs to run.
Can't open HKEY_LOCAL_MACHINE\Startup key.
[WiFi]: Firmware Version: 9.70.3.23
CCaptureFramework: Failed setting up the camera data.
CameraDShowApp: Initializing the camera driver list failed.CameraDShowApp: Retri
eving the driver list failed.CameraDShowApp: Selecting the camera device failed.
CameraDShowApp: Selecting the camera device failed.CameraDShowApp: Selecting the
camera device failed.CameraDShowApp: Selecting the camera device failed.CCaptur
eFramework: Retrieving the still stream config failed.
CameraDShowApp: Initializing the capture graph failed. -
My Macbook Pro Won't boot. Unable to find the driver for this platform
Hi there,
After doing some casual internet browsing earlier today (facebook + twitter etc) my laptop froze up. While I was able to click between windows, the ever faithful beach ball was there to ensure I couldn't really do anything, including making the dock appear when mousing towards the bottom. So I held down the power button to shut it down, and restarted. After the apple logo had sat there for quite some time I got a message something along the lines of:
Unable to find driver for this platform:\"ACPI\".In"@/SourceCache/xnu/xnu-1699.32.7/iokit/kernel
This was followed by a message telling me I needed to restart my computer using the power button. After several attempts all producing the same results, I was still in the same boat. So I sought some online help which lead me to boot into my recovery partition (holding down the option key at startup) and install the operating system again from there. However this is when I really started to panic. After selecting the recoverey partition the apple logo flipped between a no access symbol (that circle with a line through it) and the apple logo for a couple of seconds, before settling on the apple logo. But the recovery partition never loads and after some time I either get a symbol of a folder with a question mark in it or I similar message telling me to restart.
Next I tried plugging in my external hard drive with a few time machine backups as well as a carbon copy back up and another recovery partition. Using the external HD's recovery partition took me to a menu which the online help had initially promised where I could reinstall osx as well as use disc utitlity. So I tried to run the installer from here only to find my hard drive didn't show up in the list of destination volumes. The time machine and recovery partitions from my hard drives did, but I couldn't select these.
I then turned my attention to the disc utility and tried to repair my hard drive. I was unsure which one to select at first because there were two names for my hard drive; the first being the hard drives actual name (a samsung something or other) and the second was called 'Lion.' I started by repairing the samsung one and this was over in a few seconds saying it was successfully repaired. So I moved on to 'Lion' and this took a few moments, before stalling on a section saying "Updating boot support partitions for the volume as required." I was also advised to recover any data I could and restore I backup.
So that's where I'm currently at. I'd really hate to lose any recent data, as my last time machine back up was about a week ago and I'd made some substantial progress on a mix since then!
I'd really appreciate any help that anyone can offer,
Cheers!Just had another look in the disc utility and found that the samsung's partition scheme is set to master boot record, which is apprently used for windows partitions? I've no idea how this happend because When I originally formatted the drive I'm sure I would have set it to GUID partition table. Clicking on 'Lion' just gives dashes for the partition type, capacity and available space values.
-
Problems with driver for ATI xpress 200
Hi all,
this morning I saw that there is KDE4 available. Straight away I installed the packages, run it and it crashed. There was a funny graphical effect just before the crash. This gave me the impression that the problems comes from the graphical driver. I tried the proprietary ATI driver which hangs once kdm is launched. Then I tried VESA which doesn't even start for some funny reason. Eventually I turned to the open source ATI drivers. With them I'm running KDE in resolution 1280x768 which is somewhat strange. So far, I haven't found a solution and think I need a help.
Here is my xorg.conf
Section "ServerLayout"
Identifier "Xorg Configured"
Screen 0 "ATIScreen" 0 0
#Screen 0 "VesaScreen" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "PS/2 Mouse" "CorePointer"
EndSection
Section "Files"
# True type and type1 fonts are also handled via xftlib, see /etc/X11/XftConfig!
RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/Type1"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/speedo"
FontPath "/usr/local/share/fonts"
EndSection
Section "Module"
Load "ddc" # ddc probing of monitor
Load "dbe"
Load "dri"
Load "drm"
Load "extmod"
SubSection "extmod"
Option "omit xfree86-dga"
EndSubSection
Load "glx"
Load "bitmap" # bitmap-fonts
Load "freetype"
Load "record"
EndSection
Section "ServerFlags"
Option "AllowMouseOpenFail" "true"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us,cz"
Option "XkbVariant" ",qwerty_bksl"
Option "XkbOptions" "grp:rwin_toggle"
EndSection
Section "InputDevice"
#Option "Emulate3Timeout" "70"
Identifier "PS/2 Mouse"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "ZAxisMapping" "4 5"
Option "Device" "/dev/input/mice"
Option "Buttons" "7"
#Option "Emulate3Buttons" "true"
Option "SendCoreEvents" "true"
EndSection
Section "InputDevice"
#Driver "evdev"
#Option "Device" "/dev/input/event4"
Identifier "USB Mouse"
Driver "mouse"
Option "Device" "/dev/input/mice"
Option "SendCoreEvents" "true"
Option "Protocol" "IMPS/2"
Option "ZAxisMapping" "4 5"
Option "Buttons" "5"
EndSection
Section "Monitor"
Identifier "MyMonitor"
HorizSync 28.0 - 96.0
VertRefresh 50.0 - 75.0
ModeLine "640x480" 36.0 640 696 752 832 480 481 484 509 -hsync -vsync
ModeLine "800x600" 56.3 800 832 896 1048 600 601 604 631 +hsync +vsync
ModeLine "1024x768" 65.0 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
ModeLine "1280x1024" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "VESA"
Driver "vesa"
EndSection
Section "Device"
Identifier "ATI"
BusId "PCI:1:5:0"
#Option "MonitorLayout" "TMDS"
#Driver "fglrx"
Driver "radeon"
Option "XAANoOffscreenPixmaps" "true"
EndSection
Section "Screen"
Identifier "VesaScreen"
Device "VESA"
Monitor "MyMonitor"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "Screen"
Identifier "ATIScreen"
Device "ATI"
Monitor "MyMonitor"
DefaultDepth 24
SubSection "Display"
#Viewport 0 0
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
#Section "DRI"
# Group "video"
# Mode 0666
#EndSection
And here is the X11 log
X.Org X Server 1.4.2
Release Date: 11 June 2008
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.25-ARCH i686
Current Operating System: Linux pctotem40 2.6.26-ARCH #1 SMP PREEMPT Thu Jul 24 22:35:56 CEST 2008 i686
Build Date: 21 June 2008 05:47:59PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Jul 28 17:15:54 2008
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Xorg Configured"
(**) |-->Screen "ATIScreen" (0)
(**) | |-->Monitor "MyMonitor"
(**) | |-->Device "ATI"
(**) |-->Input Device "Keyboard0"
(**) |-->Input Device "PS/2 Mouse"
(**) Option "AllowMouseOpenFail" "true"
(==) Automatically adding devices
(==) Automatically enabling devices
(==) Including the default font path /usr/share/fonts/misc,/usr/share/fonts/100dpi:unscaled,/usr/share/fonts/75dpi:unscaled,/usr/share/fonts/TTF,/usr/share/fonts/Type1.
(**) FontPath set to:
/usr/share/fonts/misc:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/Type1,
/usr/share/fonts/TTF,
/usr/share/fonts/speedo,
/usr/local/share/fonts,
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1
(**) RgbPath set to "/usr/share/X11/rgb"
(**) ModulePath set to "/usr/lib/xorg/modules"
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) Loader magic: 0x81e0a60
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.3
X.Org Video Driver: 2.0
X.Org XInput driver : 2.0
X.Org Server Extension : 0.3
X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 2.0
(++) using VT number 7
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 1002,5950 card 103c,280a rev 10 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 1002,5a3f card 0000,0000 rev 00 class 06,04,00 hdr 01
(II) PCI: 00:07:0: chip 1002,5a39 card 0000,0000 rev 00 class 06,04,00 hdr 01
(II) PCI: 00:12:0: chip 1002,4380 card 103c,2813 rev 00 class 01,06,01 hdr 00
(II) PCI: 00:13:0: chip 1002,4387 card 103c,280a rev 00 class 0c,03,10 hdr 80
(II) PCI: 00:13:1: chip 1002,4388 card 103c,280a rev 00 class 0c,03,10 hdr 00
(II) PCI: 00:13:2: chip 1002,4389 card 103c,280a rev 00 class 0c,03,10 hdr 00
(II) PCI: 00:13:3: chip 1002,438a card 103c,280a rev 00 class 0c,03,10 hdr 00
(II) PCI: 00:13:4: chip 1002,438b card 103c,280a rev 00 class 0c,03,10 hdr 00
(II) PCI: 00:13:5: chip 1002,4386 card 103c,280a rev 00 class 0c,03,20 hdr 00
(II) PCI: 00:14:0: chip 1002,4385 card 103c,280a rev 13 class 0c,05,00 hdr 80
(II) PCI: 00:14:1: chip 1002,438c card 103c,280a rev 00 class 01,01,8f hdr 00
(II) PCI: 00:14:2: chip 1002,4383 card 103c,280a rev 00 class 04,03,00 hdr 00
(II) PCI: 00:14:3: chip 1002,438d card 103c,280a rev 00 class 06,01,00 hdr 80
(II) PCI: 00:14:4: chip 1002,4384 card 0000,0000 rev 00 class 06,04,01 hdr 81
(II) PCI: 00:18:0: chip 1022,1100 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:18:1: chip 1022,1101 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:18:2: chip 1022,1102 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:18:3: chip 1022,1103 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 01:05:0: chip 1002,5974 card 103c,280a rev 00 class 03,00,00 hdr 80
(II) PCI: 01:05:1: chip 1002,5874 card 103c,280b rev 00 class 03,80,00 hdr 00
(II) PCI: 3f:00:0: chip 14e4,167b card 103c,280a rev 02 class 02,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,63), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000a (VGA_EN is set)
(II) Bus 1 I/O range:
[0] -1 0 0x00001000 - 0x00001fff (0x1000) IX[b]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xd8500000 - 0xd87fffff (0x300000) MX[b]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xc8000000 - 0xd81fffff (0x10200000) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 63: bridge is at (0:7:0), (0,63,63), BCTRL: 0x0002 (VGA_EN is cleared)
(II) Bus 63 non-prefetchable memory range:
[0] -1 0 0xd8200000 - 0xd84fffff (0x300000) MX[b]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:20:3), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) Subtractive PCI-to-PCI bridge:
(II) Bus 7: bridge is at (0:20:4), (0,7,7), BCTRL: 0x0002 (VGA_EN is cleared)
(--) PCI:*(1:5:0) ATI Technologies Inc RS482 [Radeon Xpress 200] rev 0, Mem @ 0xc8000000/27, 0xd8500000/16, I/O @ 0x1100/8
(--) PCI: (1:5:1) ATI Technologies Inc unknown chipset (0x5874) rev 0, Mem @ 0xd0000000/27, 0xd8510000/16
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) OS-reported resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) Active PCI resource ranges:
[0] -1 0 0xd8400000 - 0xd840ffff (0x10000) MX[b]
[1] -1 0 0xd8a00000 - 0xd8a03fff (0x4000) MX[b]
[2] -1 0 0xd8a09400 - 0xd8a094ff (0x100) MX[b]
[3] -1 0 0xd8a08000 - 0xd8a08fff (0x1000) MX[b]
[4] -1 0 0xd8a07000 - 0xd8a07fff (0x1000) MX[b]
[5] -1 0 0xd8a06000 - 0xd8a06fff (0x1000) MX[b]
[6] -1 0 0xd8a05000 - 0xd8a05fff (0x1000) MX[b]
[7] -1 0 0xd8a04000 - 0xd8a04fff (0x1000) MX[b]
[8] -1 0 0xd8a09000 - 0xd8a093ff (0x400) MX[b]
[9] -1 0 0xd8500000 - 0xd850ffff (0x10000) MX[b](B)
[10] -1 0 0xc8000000 - 0xcfffffff (0x8000000) MX[b](B)
[11] -1 0 0x00002120 - 0x0000212f (0x10) IX[b]
[12] -1 0 0x0000215c - 0x0000215f (0x4) IX[b]
[13] -1 0 0x00002148 - 0x0000214f (0x8) IX[b]
[14] -1 0 0x00002158 - 0x0000215b (0x4) IX[b]
[15] -1 0 0x00002140 - 0x00002147 (0x8) IX[b]
[16] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX[b]
[17] -1 0 0x00002100 - 0x0000210f (0x10) IX[b]
[18] -1 0 0x00002154 - 0x00002157 (0x4) IX[b]
[19] -1 0 0x00002138 - 0x0000213f (0x8) IX[b]
[20] -1 0 0x00002150 - 0x00002153 (0x4) IX[b]
[21] -1 0 0x00002130 - 0x00002137 (0x8) IX[b]
[22] -1 0 0x00001100 - 0x000011ff (0x100) IX[b](B)
(II) Inactive PCI resource ranges:
[0] -1 0 0xd8510000 - 0xd851ffff (0x10000) MX[b](B)
[1] -1 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[b](B)
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xd8400000 - 0xd840ffff (0x10000) MX[b]
[1] -1 0 0xd8a00000 - 0xd8a03fff (0x4000) MX[b]
[2] -1 0 0xd8a09400 - 0xd8a094ff (0x100) MX[b]
[3] -1 0 0xd8a08000 - 0xd8a08fff (0x1000) MX[b]
[4] -1 0 0xd8a07000 - 0xd8a07fff (0x1000) MX[b]
[5] -1 0 0xd8a06000 - 0xd8a06fff (0x1000) MX[b]
[6] -1 0 0xd8a05000 - 0xd8a05fff (0x1000) MX[b]
[7] -1 0 0xd8a04000 - 0xd8a04fff (0x1000) MX[b]
[8] -1 0 0xd8a09000 - 0xd8a093ff (0x400) MX[b]
[9] -1 0 0xd8500000 - 0xd850ffff (0x10000) MX[b](B)
[10] -1 0 0xc8000000 - 0xcfffffff (0x8000000) MX[b](B)
[11] -1 0 0x00002120 - 0x0000212f (0x10) IX[b]
[12] -1 0 0x0000215c - 0x0000215f (0x4) IX[b]
[13] -1 0 0x00002148 - 0x0000214f (0x8) IX[b]
[14] -1 0 0x00002158 - 0x0000215b (0x4) IX[b]
[15] -1 0 0x00002140 - 0x00002147 (0x8) IX[b]
[16] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX[b]
[17] -1 0 0x00002100 - 0x0000210f (0x10) IX[b]
[18] -1 0 0x00002154 - 0x00002157 (0x4) IX[b]
[19] -1 0 0x00002138 - 0x0000213f (0x8) IX[b]
[20] -1 0 0x00002150 - 0x00002153 (0x4) IX[b]
[21] -1 0 0x00002130 - 0x00002137 (0x8) IX[b]
[22] -1 0 0x00001100 - 0x000011ff (0x100) IX[b](B)
(II) Inactive PCI resource ranges after removing overlaps:
[0] -1 0 0xd8510000 - 0xd851ffff (0x10000) MX[b](B)
[1] -1 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[b](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) All system resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xd8400000 - 0xd840ffff (0x10000) MX[b]
[5] -1 0 0xd8a00000 - 0xd8a03fff (0x4000) MX[b]
[6] -1 0 0xd8a09400 - 0xd8a094ff (0x100) MX[b]
[7] -1 0 0xd8a08000 - 0xd8a08fff (0x1000) MX[b]
[8] -1 0 0xd8a07000 - 0xd8a07fff (0x1000) MX[b]
[9] -1 0 0xd8a06000 - 0xd8a06fff (0x1000) MX[b]
[10] -1 0 0xd8a05000 - 0xd8a05fff (0x1000) MX[b]
[11] -1 0 0xd8a04000 - 0xd8a04fff (0x1000) MX[b]
[12] -1 0 0xd8a09000 - 0xd8a093ff (0x400) MX[b]
[13] -1 0 0xd8500000 - 0xd850ffff (0x10000) MX[b](B)
[14] -1 0 0xc8000000 - 0xcfffffff (0x8000000) MX[b](B)
[15] -1 0 0xd8510000 - 0xd851ffff (0x10000) MX[b](B)
[16] -1 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[b](B)
[17] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[18] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[19] -1 0 0x00002120 - 0x0000212f (0x10) IX[b]
[20] -1 0 0x0000215c - 0x0000215f (0x4) IX[b]
[21] -1 0 0x00002148 - 0x0000214f (0x8) IX[b]
[22] -1 0 0x00002158 - 0x0000215b (0x4) IX[b]
[23] -1 0 0x00002140 - 0x00002147 (0x8) IX[b]
[24] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX[b]
[25] -1 0 0x00002100 - 0x0000210f (0x10) IX[b]
[26] -1 0 0x00002154 - 0x00002157 (0x4) IX[b]
[27] -1 0 0x00002138 - 0x0000213f (0x8) IX[b]
[28] -1 0 0x00002150 - 0x00002153 (0x4) IX[b]
[29] -1 0 0x00002130 - 0x00002137 (0x8) IX[b]
[30] -1 0 0x00001100 - 0x000011ff (0x100) IX[b](B)
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "freetype" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) LoadModule: "ddc"(II) Module "ddc" already built-in
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension XFree86-DRI
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "extmod"
(II) Reloading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 1.4.2, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension RECORD
(II) LoadModule: "radeon"
(II) Loading /usr/lib/xorg/modules/drivers//radeon_drv.so
(II) Module radeon: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 4.3.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 2.0
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.3.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.3.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) RADEON: Driver for ATI Radeon chipsets:
ATI Radeon Mobility X600 (M24) 3150 (PCIE),
ATI Radeon Mobility X300 (M24) 3152 (PCIE),
ATI FireGL M24 GL 3154 (PCIE), ATI Radeon X600 (RV380) 3E50 (PCIE),
ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
ATI Radeon 8500 AIW BB (AGP), ATI Radeon 8500 AIW BC (AGP),
ATI Radeon IGP320M (U1) 4336, ATI Radeon IGP330M/340M/350M (U2) 4337,
ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
ATI Radeon X800PRO (R420) JI (AGP),
ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
ATI Radeon Mobility 9800 (M18) JN (AGP),
ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
ATI Radeon Mobility M7 LW (AGP),
ATI Mobility FireGL 7800 M7 LX (AGP),
ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
ATI FireGL Mobility 9000 (M9) Ld (AGP),
ATI Radeon Mobility 9000 (M9) Lf (AGP),
ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI Radeon 9700 Pro ND (AGP),
ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9600TX NF (AGP),
ATI FireGL X1 NG (AGP), ATI Radeon 9800PRO NH (AGP),
ATI Radeon 9800 NI (AGP), ATI FireGL X2 NK (AGP),
ATI Radeon 9800XT NJ (AGP),
ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
ATI Radeon Mobility 9600 (M10) NQ (AGP),
ATI Radeon Mobility 9600 (M11) NR (AGP),
ATI Radeon Mobility 9600 (M10) NS (AGP),
ATI FireGL Mobility T2 (M10) NT (AGP),
ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
ATI Radeon Mobility X300 (M22) 5460 (PCIE),
ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
ATI Radeon X800PRO (R423) UI (PCIE),
ATI Radeon X800LE (R423) UJ (PCIE),
ATI Radeon X800SE (R423) UK (PCIE),
ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
ATI FireGL unknown (R423) UR (PCIE),
ATI FireGL unknown (R423) UT (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility Radeon X700 XL (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE), ATI Radeon 9100 IGP (A5) 5834,
ATI Radeon Mobility 9100 IGP (U3) 5835,
ATI Radeon XPRESS 200 5954 (PCIE),
ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
ATI Radeon XPRESS 200M 5975 (PCIE),
ATI Radeon XPRESS 200 5A41 (PCIE),
ATI Radeon XPRESS 200M 5A42 (PCIE),
ATI Radeon XPRESS 200 5A61 (PCIE),
ATI Radeon XPRESS 200M 5A62 (PCIE),
ATI Radeon X300 (RV370) 5B60 (PCIE),
ATI Radeon X600 (RV370) 5B62 (PCIE),
ATI Radeon X550 (RV370) 5B63 (PCIE),
ATI Radeon X550XTX (RV370) 5657 (PCIE),
ATI FireGL V3100 (RV370) 5B64 (PCIE),
ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
ATI Mobility Radeon X800 XT (M28) (PCIE),
ATI Mobility FireGL V5100 (M28) (PCIE),
ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
ATI Radeon X850 XT PE (R480) (PCIE),
ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
ATI Radeon X850 XT (R480) (PCIE),
ATI Radeon X800XT (R423) 5D57 (PCIE),
ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
ATI Radeon X700 PRO (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
ATI Mobility Radeon X1700, ATI Radeon X2300HD,
ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI ATI FireGL V7400,
ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600, ATI RV610,
ATI Radeon HD 2400 XT, ATI Radeon HD 2400 Pro,
ATI ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000, ATI RV610,
ATI ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
ATI Mobility Radeon HD 2400, ATI ATI RADEON E2400, ATI RV610,
ATI RV670, ATI Radeon HD3870, ATI Radeon HD3850, ATI RV670,
ATI Radeon HD3870 X2, ATI FireGL V7700, ATI RV630,
ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
ATI ATI Radeon HD 2600 XT AGP, ATI ATI Radeon HD 2600 Pro AGP,
ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
ATI Gemini ATI Mobility Radeon HD 2600 XT, ATI FireGL V5600,
ATI FireGL V3600, ATI ATI Radeon HD 2600 LE
(II) Primary Device is: PCI 01:05:0
(WW) RADEON: No matching Device section for instance (BusID PCI:1:5:1) found
(--) Chipset ATI Radeon XPRESS 200 5974 (PCIE) found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xd8400000 - 0xd840ffff (0x10000) MX[b]
[5] -1 0 0xd8a00000 - 0xd8a03fff (0x4000) MX[b]
[6] -1 0 0xd8a09400 - 0xd8a094ff (0x100) MX[b]
[7] -1 0 0xd8a08000 - 0xd8a08fff (0x1000) MX[b]
[8] -1 0 0xd8a07000 - 0xd8a07fff (0x1000) MX[b]
[9] -1 0 0xd8a06000 - 0xd8a06fff (0x1000) MX[b]
[10] -1 0 0xd8a05000 - 0xd8a05fff (0x1000) MX[b]
[11] -1 0 0xd8a04000 - 0xd8a04fff (0x1000) MX[b]
[12] -1 0 0xd8a09000 - 0xd8a093ff (0x400) MX[b]
[13] -1 0 0xd8500000 - 0xd850ffff (0x10000) MX[b](B)
[14] -1 0 0xc8000000 - 0xcfffffff (0x8000000) MX[b](B)
[15] -1 0 0xd8510000 - 0xd851ffff (0x10000) MX[b](B)
[16] -1 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[b](B)
[17] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[18] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[19] -1 0 0x00002120 - 0x0000212f (0x10) IX[b]
[20] -1 0 0x0000215c - 0x0000215f (0x4) IX[b]
[21] -1 0 0x00002148 - 0x0000214f (0x8) IX[b]
[22] -1 0 0x00002158 - 0x0000215b (0x4) IX[b]
[23] -1 0 0x00002140 - 0x00002147 (0x8) IX[b]
[24] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX[b]
[25] -1 0 0x00002100 - 0x0000210f (0x10) IX[b]
[26] -1 0 0x00002154 - 0x00002157 (0x4) IX[b]
[27] -1 0 0x00002138 - 0x0000213f (0x8) IX[b]
[28] -1 0 0x00002150 - 0x00002153 (0x4) IX[b]
[29] -1 0 0x00002130 - 0x00002137 (0x8) IX[b]
[30] -1 0 0x00001100 - 0x000011ff (0x100) IX[b](B)
(II) resource ranges after probing:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xd8400000 - 0xd840ffff (0x10000) MX[b]
[5] -1 0 0xd8a00000 - 0xd8a03fff (0x4000) MX[b]
[6] -1 0 0xd8a09400 - 0xd8a094ff (0x100) MX[b]
[7] -1 0 0xd8a08000 - 0xd8a08fff (0x1000) MX[b]
[8] -1 0 0xd8a07000 - 0xd8a07fff (0x1000) MX[b]
[9] -1 0 0xd8a06000 - 0xd8a06fff (0x1000) MX[b]
[10] -1 0 0xd8a05000 - 0xd8a05fff (0x1000) MX[b]
[11] -1 0 0xd8a04000 - 0xd8a04fff (0x1000) MX[b]
[12] -1 0 0xd8a09000 - 0xd8a093ff (0x400) MX[b]
[13] -1 0 0xd8500000 - 0xd850ffff (0x10000) MX[b](B)
[14] -1 0 0xc8000000 - 0xcfffffff (0x8000000) MX[b](B)
[15] -1 0 0xd8510000 - 0xd851ffff (0x10000) MX[b](B)
[16] -1 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[b](B)
[17] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[18] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[19] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[20] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[21] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[22] -1 0 0x00002120 - 0x0000212f (0x10) IX[b]
[23] -1 0 0x0000215c - 0x0000215f (0x4) IX[b]
[24] -1 0 0x00002148 - 0x0000214f (0x8) IX[b]
[25] -1 0 0x00002158 - 0x0000215b (0x4) IX[b]
[26] -1 0 0x00002140 - 0x00002147 (0x8) IX[b]
[27] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX[b]
[28] -1 0 0x00002100 - 0x0000210f (0x10) IX[b]
[29] -1 0 0x00002154 - 0x00002157 (0x4) IX[b]
[30] -1 0 0x00002138 - 0x0000213f (0x8) IX[b]
[31] -1 0 0x00002150 - 0x00002153 (0x4) IX[b]
[32] -1 0 0x00002130 - 0x00002137 (0x8) IX[b]
[33] -1 0 0x00001100 - 0x000011ff (0x100) IX[b](B)
[34] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[35] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) Setting vga for screen 0.
(II) RADEON(0): MMIO registers at 0x00000000d8500000: size 64KB
(II) RADEON(0): PCI bus 1 card 5 func 0
(**) RADEON(0): Depth 24, (--) framebuffer bpp 32
(II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) RADEON(0): Default visual is TrueColor
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 0.1.0
ABI class: X.Org Video Driver, version 2.0
(II) RADEON(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(==) RADEON(0): RGB weight 888
(II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 2.0
(II) RADEON(0): initializing int10
(II) RADEON(0): Primary V_BIOS segment is: 0xc000
(--) RADEON(0): Chipset: "ATI Radeon XPRESS 200 5974 (PCIE)" (ChipID = 0x5974)
(--) RADEON(0): Linear framebuffer at 0x00000000c8000000
(II) RADEON(0): PCI card detected
(II) RADEON(0): Legacy BIOS detected
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:05.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: drmOpenMinor returns 7
drmOpenByBusid: drmGetBusid reports pci:0000:01:05.0
(II) RADEON(0): [dri] Found DRI library version 1.3.0 and kernel module version 1.29.0
(II) RADEON(0): Direct rendering experimental on RS400/Xpress 200 enabled
(==) RADEON(0): Page Flipping disabled
(II) RADEON(0): Will try to use DMA for Xv image transfers
(II) RADEON(0): Generation 1 PCI interface in multifunction mode, accessible memory limited to one aperture
(II) RADEON(0): Detected total video RAM=131072K, accessible=65536K (PCI BAR=131072K)
(--) RADEON(0): Mapped VideoRAM: 65536 kByte (64 bit DDR SDRAM)
(II) RADEON(0): Color tiling enabled by default
(II) RADEON(0): Max desktop size set to 2560x1200
(II) RADEON(0): For a larger or smaller max desktop size, add a Virtual line to your xorg.conf
(II) RADEON(0): If you are having trouble with 3D, reduce the desktop size by adjusting the Virtual line to your xorg.conf
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"(II) Module "i2c" already built-in
(II) RADEON(0): ref_freq: 1432, min_out_pll: 20000, max_out_pll: 40000, min_in_pll: 100, max_in_pll: 1350, xclk: 40000, sclk: 400.000000, mclk: 400.000000
(II) RADEON(0): PLL parameters: rf=1432 rd=6 min=20000 max=40000; xclk=40000
(WW) RADEON(0): Proprietary connector found, assuming DVI-D
(WW) RADEON(0): Unknown Connector Type: 8
(WW) RADEON(0): Unknown DDC Type: 8
(II) RADEON(0): Bios Connector table:
(II) RADEON(0): Port0: DDCType-0x68, DACType-2, TMDSType-1, ConnectorType-1
(II) RADEON(0): Port1: DDCType-0x68, DACType-0, TMDSType-2, ConnectorType-3
(II) RADEON(0): Port5: DDCType-0x0, DACType-2, TMDSType-0, ConnectorType-5
(II) RADEON(0): Output VGA-0 using monitor section MyMonitor
(II) RADEON(0): I2C bus "VGA-0" initialized.
(II) RADEON(0): Output DVI-0 has no monitor section
(WW) RADEON(0): No External TMDS Table found
(II) RADEON(0): I2C bus "DVO" initialized.
(II) RADEON(0): I2C device "DVO:RADEON DVO Controller" registered at address 0x70.
(II) RADEON(0): I2C bus "DVI-0" initialized.
(II) RADEON(0): Output S-video has no monitor section
(II) RADEON(0): Default TV standard: NTSC
(II) RADEON(0): TV standards supported by chip: NTSC PAL PAL-M NTSC-J
(II) RADEON(0): Port0:
Monitor -- AUTO
Connector -- VGA
DAC Type -- TVDAC/ExtDAC
TMDS Type -- None
DDC Type -- 0x68
(II) RADEON(0): Port1:
Monitor -- AUTO
Connector -- DVI-D
DAC Type -- None
TMDS Type -- External
DDC Type -- 0x68
(II) RADEON(0): Port2:
Monitor -- AUTO
Connector -- STV
DAC Type -- TVDAC/ExtDAC
TMDS Type -- None
DDC Type -- 0x0
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
finished output detect: 0
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
(II) RADEON(0): Detected non-DDC Monitor Type: 0
finished output detect: 1
finished output detect: 2
(EE) RADEON(0): No connected devices found!
finished all detect
before xf86InitialConfiguration
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
(EE) RADEON(0): Using VGA default
in RADEONProbeOutputModes
(II) RADEON(0): Adding Screen mode: 1280x1024
(II) RADEON(0): Adding Screen mode: 1024x768
(II) RADEON(0): Adding Screen mode: 800x600
(II) RADEON(0): Adding Screen mode: 640x480
(II) RADEON(0): Total number of valid Screen mode(s) added: 4
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
(II) RADEON(0): Detected non-DDC Monitor Type: 0
(II) RADEON(0): Output VGA-0 connected
(II) RADEON(0): Output DVI-0 disconnected
(II) RADEON(0): Output S-video disconnected
(II) RADEON(0): Output VGA-0 using initial mode 1280x768
after xf86InitialConfiguration
(==) RADEON(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.3
(==) RADEON(0): Using gamma correction (1.0, 1.0, 1.0)
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"(II) Module "ramdac" already built-in
(==) RADEON(0): Using XAA acceleration architecture
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.2.0
ABI class: X.Org Video Driver, version 2.0
(==) RADEON(0): Assuming overlay scaler buffer width is 1536
(II) RADEON(0): No MM_TABLE found - assuming CARD is not TV-in capable.
(!!) RADEON(0): For information on using the multimedia capabilities
of this adapter, please see http://gatos.sf.net.
(!!) RADEON(0): MergedFB support has been removed and replaced with xrandr 1.2 support
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xd8500000 - 0xd850ffff (0x10000) MX[b]
[1] 0 0 0xc8000000 - 0xcfffffff (0x8000000) MX[b]
[2] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[3] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[4] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[5] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[6] -1 0 0xd8400000 - 0xd840ffff (0x10000) MX[b]
[7] -1 0 0xd8a00000 - 0xd8a03fff (0x4000) MX[b]
[8] -1 0 0xd8a09400 - 0xd8a094ff (0x100) MX[b]
[9] -1 0 0xd8a08000 - 0xd8a08fff (0x1000) MX[b]
[10] -1 0 0xd8a07000 - 0xd8a07fff (0x1000) MX[b]
[11] -1 0 0xd8a06000 - 0xd8a06fff (0x1000) MX[b]
[12] -1 0 0xd8a05000 - 0xd8a05fff (0x1000) MX[b]
[13] -1 0 0xd8a04000 - 0xd8a04fff (0x1000) MX[b]
[14] -1 0 0xd8a09000 - 0xd8a093ff (0x400) MX[b]
[15] -1 0 0xd8500000 - 0xd850ffff (0x10000) MX[b](B)
[16] -1 0 0xc8000000 - 0xcfffffff (0x8000000) MX[b](B)
[17] -1 0 0xd8510000 - 0xd851ffff (0x10000) MX[b](B)
[18] -1 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[b](B)
[19] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprU)
[20] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprU)
[21] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprU)
[22] 0 0 0x00001100 - 0x000011ff (0x100) IX[b]
[23] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[24] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[25] -1 0 0x00002120 - 0x0000212f (0x10) IX[b]
[26] -1 0 0x0000215c - 0x0000215f (0x4) IX[b]
[27] -1 0 0x00002148 - 0x0000214f (0x8) IX[b]
[28] -1 0 0x00002158 - 0x0000215b (0x4) IX[b]
[29] -1 0 0x00002140 - 0x00002147 (0x8) IX[b]
[30] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX[b]
[31] -1 0 0x00002100 - 0x0000210f (0x10) IX[b]
[32] -1 0 0x00002154 - 0x00002157 (0x4) IX[b]
[33] -1 0 0x00002138 - 0x0000213f (0x8) IX[b]
[34] -1 0 0x00002150 - 0x00002153 (0x4) IX[b]
[35] -1 0 0x00002130 - 0x00002137 (0x8) IX[b]
[36] -1 0 0x00001100 - 0x000011ff (0x100) IX[b](B)
[37] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
[38] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
(II) RADEON(0): RADEONScreenInit c8000000 0 0
(==) RADEON(0): Write-combining range (0xc8000000,0x4000000)
Entering TV Save
Save TV timing tables
saveTimingTables: reading timing tables
TV Save done
disable montype: 1
(==) RADEON(0): Using 24 bit depth buffer
(II) RADEON(0): RADEONInitMemoryMap() :
(II) RADEON(0): mem_size : 0x08000000
(II) RADEON(0): MC_FB_LOCATION : 0x3fff3800
(II) RADEON(0): MC_AGP_LOCATION : 0xffffffc0
(II) RADEON(0): Depth moves disabled by default
(II) RADEON(0): CP in BM mode
(II) RADEON(0): Using 8 MB GART aperture
(II) RADEON(0): Using 1 MB for the ring buffer
(II) RADEON(0): Using 2 MB for vertex/indirect buffers
(II) RADEON(0): Using 5 MB for GART textures
(II) RADEON(0): Memory manager initialized to (0,0) (1920,8191)
(II) RADEON(0): Reserved area from (0,1200) to (1920,1202)
(II) RADEON(0): Largest offscreen area available: 1920 x 6989
(II) RADEON(0): Will use front buffer at offset 0x0
(II) RADEON(0): Will use back buffer at offset 0x11d0000
(II) RADEON(0): Will use depth buffer at offset 0x1a9a000
(II) RADEON(0): Will use 29184 kb for textures at offset 0x2364000
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:05.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: drmOpenMinor returns 7
drmOpenByBusid: drmGetBusid reports pci:0000:01:05.0
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) RADEON(0): [drm] Using the DRM lock SAREA also for drawables.
(II) RADEON(0): [drm] framebuffer handle = 0xc8000000
(II) RADEON(0): [drm] added 1 reserved context for kernel
(II) RADEON(0): X context handle = 0x1
(II) RADEON(0): [drm] installed DRM signal handler
(II) RADEON(0): [pci] 8192 kB allocated with handle 0xf8e72000
(II) RADEON(0): [pci] ring handle = 0xf8e72000
(II) RADEON(0): [pci] Ring mapped at 0xb38a5000
(II) RADEON(0): [pci] Ring contents 0x00000000
(II) RADEON(0): [pci] ring read ptr handle = 0xf8f73000
(II) RADEON(0): [pci] Ring read ptr mapped at 0xb38a4000
(II) RADEON(0): [pci] Ring read ptr contents 0x00000000
(II) RADEON(0): [pci] vertex/indirect buffers handle = 0xf8f74000
(II) RADEON(0): [pci] Vertex/indirect buffers mapped at 0xb36a4000
(II) RADEON(0): [pci] Vertex/indirect buffers contents 0x00000000
(II) RADEON(0): [pci] GART texture map handle = 0xf9174000
(II) RADEON(0): [pci] GART Texture map mapped at 0xb31c4000
(II) RADEON(0): [drm] register handle = 0xd8500000
(II) RADEON(0): [dri] Visual configs initialized
disable montype: 1
init memmap
init common
init crtc1
init pll1
freq: 80140000
best_freq: 80136923
best_feedback_div: 291
best_ref_div: 13
best_post_div: 4
restore memmap
(II) RADEON(0): RADEONRestoreMemMapRegisters() :
(II) RADEON(0): MC_FB_LOCATION : 0x3fff3800 0x3fff3800
(II) RADEON(0): MC_AGP_LOCATION : 0xffffffc0
restore common
restore crtc1
restore pll1
finished PLL1
restore dac
enable montype: 1
(WW) RADEON(0): No crtc mode list for crtc 1,continuing with desired mode
disable montype: 1
(==) RADEON(0): Backing store disabled
(II) RADEON(0): [DRI] installation complete
(II) RADEON(0): [drm] Added 32 65536 byte vertex/indirect buffers
(II) RADEON(0): [drm] Mapped 32 vertex/indirect buffers
(II) RADEON(0): [drm] dma control initialized, using IRQ 17
(II) RADEON(0): [drm] Initialized kernel GART heap manager, 5111808
(WW) RADEON(0): DRI init changed memory map, adjusting ...
(WW) RADEON(0): MC_FB_LOCATION was: 0x3fff3800 is: 0x3fff3800
(WW) RADEON(0): MC_AGP_LOCATION was: 0xffffffc0 is: 0x41ff4000
(II) RADEON(0): RADEONRestoreMemMapRegisters() :
(II) RADEON(0): MC_FB_LOCATION : 0x3fff3800 0x3fff3800
(II) RADEON(0): MC_AGP_LOCATION : 0x41ff4000
(II) RADEON(0): Direct rendering enabled
(II) RADEON(0): Render acceleration unsupported on Radeon 9500/9700 and newer.
(II) RADEON(0): Render acceleration disabled
(**) RADEON(0): Option "XaaNoOffscreenPixmaps" "true"
(II) RADEON(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Lines
Scanline Image Writes
Setting up tile and stipple cache:
32 128x128 slots
32 256x256 slots
16 512x512 slots
(II) RADEON(0): Acceleration enabled
(**) Option "dpms" "true"
(**) RADEON(0): DPMS enabled
(==) RADEON(0): Silken mouse enabled
(II) RADEON(0): Using hardware cursor 0 (scanline 1202)
(II) RADEON(0): Using hardware cursor 1 (scanline 1204)
(II) RADEON(0): Largest offscreen area available: 1920 x 6984
(II) RADEON(0): No video input capabilities detected and no information is provided - disabling multimedia i2c
(II) Loading sub module "theatre_detect"
(II) LoadModule: "theatre_detect"
(II) Loading /usr/lib/xorg/modules/multimedia//theatre_detect_drv.so
(II) Module theatre_detect: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 2.0
(II) RADEON(0): no multimedia table present, disabling Rage Theatre.
(II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(--) RandR disabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension XAccessControlExtension
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:05.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: drmOpenMinor returns 8
drmOpenByBusid: drmGetBusid reports pci:0000:01:05.0
(WW) AIGLX: 3D driver claims to not support visual 0x23
(WW) AIGLX: 3D driver claims to not support visual 0x24
(WW) AIGLX: 3D driver claims to not support visual 0x25
(WW) AIGLX: 3D driver claims to not support visual 0x26
(WW) AIGLX: 3D driver claims to not support visual 0x27
(WW) AIGLX: 3D driver claims to not support visual 0x28
(WW) AIGLX: 3D driver claims to not support visual 0x29
(WW) AIGLX: 3D driver claims to not support visual 0x2a
(WW) AIGLX: 3D driver claims to not support visual 0x2b
(WW) AIGLX: 3D driver claims to not support visual 0x2c
(WW) AIGLX: 3D driver claims to not support visual 0x2d
(WW) AIGLX: 3D driver claims to not support visual 0x2e
(WW) AIGLX: 3D driver claims to not support visual 0x2f
(WW) AIGLX: 3D driver claims to not support visual 0x30
(WW) AIGLX: 3D driver claims to not support visual 0x31
(WW) AIGLX: 3D driver claims to not support visual 0x32
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/r300_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(II) RADEON(0): Setting screen physical size to 338 x 203
(**) Option "CoreKeyboard"
(**) Keyboard0: always reports core events
(**) Option "Protocol" "standard"
(**) Keyboard0: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard0: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) Keyboard0: XkbModel: "pc105"
(**) Option "XkbLayout" "us,cz"
(**) Keyboard0: XkbLayout: "us,cz"
(**) Option "XkbVariant" ",qwerty_bksl"
(**) Keyboard0: XkbVariant: ",qwerty_bksl"
(**) Option "XkbOptions" "grp:rwin_toggle"
(**) Keyboard0: XkbOptions: "grp:rwin_toggle"
(**) Option "CustomKeycodes" "off"
(**) Keyboard0: CustomKeycodes disabled
(**) Option "Protocol" "IMPS/2"
(**) PS/2 Mouse: Device: "/dev/input/mice"
(**) PS/2 Mouse: Protocol: "IMPS/2"
(**) Option "SendCoreEvents" "true"
(**) Option "CorePointer"
(**) PS/2 Mouse: always reports core events
(**) Option "Device" "/dev/input/mice"
(**) Option "Buttons" "7"
(==) PS/2 Mouse: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5"
(**) PS/2 Mouse: ZAxisMapping: buttons 4 and 5
(**) PS/2 Mouse: Buttons: 11
(**) PS/2 Mouse: Sensitivity: 1
(II) evaluating device (PS/2 Mouse)
(II) XINPUT: Adding extended input device "PS/2 Mouse" (type: MOUSE)
(II) evaluating device (Keyboard0)
(II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
(II) PS/2 Mouse: ps2EnableDataReporting: succeeded
enable montype: 1
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
(II) RADEON(0): Detected non-DDC Monitor Type: 0
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
(II) RADEON(0): Detected non-DDC Monitor Type: 0
(II) 3rd Button detected: disabling emulate3Button
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
(II) RADEON(0): Detected non-DDC Monitor Type: 0
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
(II) RADEON(0): Detected non-DDC Monitor Type: 0
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
(II) RADEON(0): Detected non-DDC Monitor Type: 0
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
(II) RADEON(0): Detected non-DDC Monitor Type: 0
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
(II) RADEON(0): Detected non-DDC Monitor Type: 0
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
(II) RADEON(0): Detected non-DDC Monitor Type: 0
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
(II) RADEON(0): Detected non-DDC Monitor Type: 0
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
(II) RADEON(0): Detected non-DDC Monitor Type: 0
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
(II) RADEON(0): Detected non-DDC Monitor Type: 0
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
(II) RADEON(0): Detected non-DDC Monitor Type: 0
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
(II) RADEON(0): Detected non-DDC Monitor Type: 0
Would you know what is the problem?
Many thanks, Jan.The problem WAS the languageset.
This helped
http://oraclespin.wordpress.com/2008/05/01/setting-nls_lang-for-oracle/ -
Win 8.1 x32 gfx driver for Intel Celeron embedded gpu
Hello, i upgraded my Lenovo Flex 10 from windows 8 to windows 8.1 and there are drivers for everything except Display driver for embedded Intel Celeron GPU. What a shame?
I tried to contact Intel, but their website says i should ask my solution manufacturer.
My CPU is Celeron N2810 and there is only driver for x64, but it was x32 operating system installedon my Flex 10 and now i can not downgrade and there is no display driver, except Mycrosoft's default one (Metro Interface is laggy).Hi,
According to the results of these two dump file, they had same reason of BSOD, both they were running google update when BSOD occurs, maybe you can try to remove Chrome on your system for test.
Roger Lu
TechNet Community Support
Chrome is not the problem, its very widely used so if there was a problem it would get fixed eventually
its only a browser, the problem is a device. BSOD happens at the kernel level where the device drivers are loaded
Place your rig specifics into your signature like I have, makes it 100x easier!
Hardcore Games Legendary is the Only Way to Play!
Maybe you are looking for
-
Can't re install HP Support Assistant nor HP Recovery manager
Both HP Support Assistant and Recovery Manager stopped working. I've tried to uninstall them and when I reinstall I get the following error messages: "microsoft .NET framework 3.5 is not installed. It is required in order to Proceed with the HP suppo
-
Dear All, In our company client requires a goods receipt (with RF scanner ) for Non PO. It means material unknown, vendor unknow but still he want goods receipt How can we map in SAP Regards subhash
-
Unable to boot mac OS X Lion after windows 7 installation using boot camp!
Hi, I'm first time mac user & recently bought the latest entry level mac mini model 2.3GHz 599$ (http://www.apple.com/macmini/specs.html). The machine by default came with OS X Lion. I was trying to install genuine windows 7 on my mac mini using boot
-
Need ideas on best ways to convert files for best use on iPad
Greetings, As a tech geek that now has an iPad, I am looking for ways to improve the way I perform daily work functions through using the iPad vice a laptop. I am a regional service manager, and as such spend a lot of time on the road. I am hoping th
-
Hello guys, I tried to configure the CAT3560 Switch with IAS Windows 2003 AD authentication without success. Is it possible at all?? If so, do I have to use Standard RADIUS in the Win 2003 IAS or Vendor specific type. I was looking in Internet and go