ASR Software Image Doubt

Hellp Experts,
I was quoting an ASR1004 and I have below options for IOS XR software under Card >> ASR1000-RP1
SASR1R1-AESK9-310S
SASR1R1-AESK9-34S
SASR1R1-AESK9-37S
SASR1R1-AESK9-38S
SASR1R1-AESK9-39S
as I understand, I need to choose one of the above depending on IOS-XR version
Also I see option below option under Managed Services Software
SASR1R1-AESK9-MS
Now I can't understand the difference between the software with "-MS" at the end and the software without it
Those two options are mutually exclusive
We are a managed service provider and this router is for our end customer
Could you tell me which one should I go?
Also find attached file

The first one is warning considering both the images sport feature set of universalk9.
Second one is a genuine error as if the image needs minimum of 64MB of flash, that is due to .tar images are uncompressed and hence need more space.
when you do manually, rather it is supported or not, it may do it irrespective of consequenses.
But in case you want to do it, there is a workaround to modify the image (c3750e-universalk9-tar.150-2.SE2) and manually change minimum space from 64MB to less.
You can go to software image repository from :
Configuration > Tools > Software Image Management > Software Repository
Click on the image and manually change minimum flash and click update. Try to upgrade again.
-Thanks

Similar Messages

Trying to Download a Software Image to Cisco 2800 series router through TFTP Using the tftpdnld ROMmon Command

Trying to Download a Software Image to Cisco 2800 series router through TFTP Using the tftpdnld ROMmon Command
and I am getting an Error , I cant figure out what I am doing wrong. I have also pasted my display down here can someone help me out, thanks in advance, I am still new to this utility.
My questions are How do you direct this utility to point to the desktop or the TFTP folder
does FE_PORT: Fast Ethernet 0 imply or point to Fa0/0 on my router
My router is suppose to have 10.0.0.3 255.0.0.0
Gateway of 10.0.0.1 255.0.0.0
My TFTP Server 10.0.0.2 255.0.0.0
How do I get the MAC address of the Router or the TFTP Server and which one is required?
my Ethernet port is 100Mb/Sec I cant tell whether it is full duplex or not so How do i set this FE_SPEED_MODE: Auto???
=====================================================================================
rommon 10 >
rommon 10 > set
PS1=rommon ! >
FE_PORT=0
WARM_REBOOT=
RET_2_RTS=20:35:55 UTC Thu Sep 25 2014
BSI=0
RET_2_RCALTS=
RANDOM_NUM=1600357627
?=0
IP_ADDRESS=10.0.0.3
IP_SUBNET_MASK=255.0.0.0
DEFAULT_GATEWAY=10.0.0.1
TFTP_SERVER=10.0.0.2
TFTP_FILE=
rommon 11 > TFTP_FILE=c2800nm-adventerprisek9-mz.124-24.T4
rommon 12 > TFTP_CHECKSUM=0
rommon 13 > SET
monitor: command "SET" not found
rommon 14 > set
PS1=rommon ! >
FE_PORT=0
WARM_REBOOT=
RET_2_RTS=20:35:55 UTC Thu Sep 25 2014
BSI=0
RET_2_RCALTS=
RANDOM_NUM=1600357627
IP_ADDRESS=10.0.0.3
IP_SUBNET_MASK=255.0.0.0
DEFAULT_GATEWAY=10.0.0.1
TFTP_SERVER=10.0.0.2
?=0
TFTP_FILE=c2800nm-adventerprisek9-mz.124-24.T4
TFTP_CHECKSUM=0
rommon 15 > tftpdnld
          IP_ADDRESS: 10.0.0.3
      IP_SUBNET_MASK: 255.0.0.0
     DEFAULT_GATEWAY: 10.0.0.1
         TFTP_SERVER: 10.0.0.2
           TFTP_FILE: c2800nm-adventerprisek9-mz.124-24.T4
        TFTP_VERBOSE: Progress
    TFTP_RETRY_COUNT: 18
        TFTP_TIMEOUT: 7200
       TFTP_CHECKSUM: No
        TFTP_MACADDR: 30:37:a6:49:35:a8
             FE_PORT: Fast Ethernet 0
       FE_SPEED_MODE: Auto
Invoke this command for disaster recovery only.
WARNING: all existing data in all partitions on flash: will be lost!
Do you wish to continue? y/n: [n]: y
ARP: address resolution for 10.0.0.2 timed out.
ARP failed with failure code 1. TFTP transfer aborted.
TFTP: Operation terminated prematurely.
rommon 16 >       " not found
rommon 17 >FE_SPEED_MODE=2
variable name contains illegal (non-printable) characters
rommon
rommon 18 > set
PS1=rommon ! >
FE_PORT=0
WARM_REBOOT=
RET_2_RTS=20:35:55 UTC Thu Sep 25 2014
BSI=0
RET_2_RCALTS=
RANDOM_NUM=1600357627
IP_ADDRESS=10.0.0.3
IP_SUBNET_MASK=255.0.0.0
DEFAULT_GATEWAY=10.0.0.1
TFTP_SERVER=10.0.0.2
TFTP_FILE=c2800nm-adventerprisek9-mz.124-24.T4
TFTP_CHECKSUM=0
?=0
rommon 19 > tftpdnld [ur]
usage: tftpdnld [-hr]
Use this command for disaster recovery only to recover an image via TFTP.
Monitor variables are used to set up parameters for the transfer.
(Syntax: "VARIABLE_NAME=value" and use "set" to show current variables.)
"ctrl-c" or "break" stops the transfer before flash erase begins.
The following variables are REQUIRED to be set for tftpdnld:
            IP_ADDRESS: The IP address for this unit
        IP_SUBNET_MASK: The subnet mask for this unit
       DEFAULT_GATEWAY: The default gateway for this unit
           TFTP_SERVER: The IP address of the server to fetch from
             TFTP_FILE: The filename to fetch
The following variables are OPTIONAL:
          TFTP_VERBOSE: Print setting. 0=quiet, 1=progress(default), 2=verbose
      TFTP_RETRY_COUNT: Retry count for ARP and TFTP (default=18)
          TFTP_TIMEOUT: Overall timeout of operation in seconds (default=7200)
         TFTP_CHECKSUM: Perform checksum test on image, 0=no, 1=yes (default=1)
          TFTP_MACADDR: The MAC address for this unit
               FE_PORT: 0= (default), 1
         FE_SPEED_MODE: 0=10/hdx, 1=10/fdx, 2=100/hdx, 3=100/fdx,
                        5=Auto (default)
      TFTP_DESTINATION: The flash destination device for the file
                        flash:(default), usbflash0:, usbflash1:
Command line options:
   -h: this help screen
   -r: do not write flash, load to DRAM only and launch image
rommon 20 > tftpdnld
          IP_ADDRESS: 10.0.0.3
      IP_SUBNET_MASK: 255.0.0.0
     DEFAULT_GATEWAY: 10.0.0.1
         TFTP_SERVER: 10.0.0.2
           TFTP_FILE: c2800nm-adventerprisek9-mz.124-24.T4
        TFTP_VERBOSE: Progress
    TFTP_RETRY_COUNT: 18
        TFTP_TIMEOUT: 7200
       TFTP_CHECKSUM: No
        TFTP_MACADDR: 30:37:a6:49:35:a8
             FE_PORT: Fast Ethernet 0
       FE_SPEED_MODE: Auto
Invoke this command for disaster recovery only.
WARNING: all existing data in all partitions on flash: will be lost!
Do you wish to continue? y/n: [n]: y
ARP: address resolution for 10.0.0.2 timed out.
ARP failed with failure code 1. TFTP transfer aborted.
TFTP: Operation terminated prematurely.
rommon 21 >

What I notice in the original post is this error
ARP: address resolution for 10.0.0.2 timed out.
which says that the router is looking for the 10.0.0.2 server but not getting response to its arp request. Can the original poster clarify for us how the device that has the image file is connected to the router that has the problem? Also what kind of device is 10.0.0.2? Is it a PC running TFTP server software or is it something else?
HTH
Rick

Prime Infrastructure 1.2 - Software Image Management

Good Day,
I have some issues with CPI 1.2. I've tried to Import Images from Cisco.com through Software Image Management
for test purposes by using my credentials. But it has finished success just a twice. Other attempt hadn't any result.
Then I try to choose Image for my test 3750E switch, sometimes I have error message like bellow:
After I choose another image and return to first that I need, and press <Submit>, I have a message that "Image collection job CCO Image Collection Job is Scheduled Successfully":
I wait some time and refresh, but I don't see any new Images. The same problem exist then I try Import Images from connected Devise. I use Shedule Start Time - Now.
Also, I can't view any information about Image in Device Work Center:
Any ideas, guys?

I'm having the same issue. I'm thinking there are still a lot of bugs in PI that Cisco needs to work out. LMS is still the better option for now in managing your switching environment. I know that Cisco hopes to role all device management under the umbrella of PI, but they still have some bugs to workout IMO.

LMS Software Image Management - Telnet failure

Hi all,
I had a problem with Software Image Management for the upgrade of a switch.
It seems that at the end of the upgrade, CiscoWorks was unable to save the configuration with telnet.
Yet, telnet seems to be ok because CiscoWorks manages to connect to the switch at the beginning of the upgrade.
Updating config file during software upgrade processDevice running-config is modified but failed to save the running-config to startup-config.Cause: Could not detect SSH protocols running on the device
TELNET: Failed to establish TELNET connection to 10.1.3.4 -Cause: Authentication failed on device 3 times.
I sent attached the logs of the upgrade.
Thank you in advance.

Hello,
The job fails last night after timeout.
I have reschedule job this morning for 2 switchs :
2960 with telnet and ssh enabled
2960 with telnet enabled only
The device credentials verification job seems to be coherent :
Device Name
Read
Community
Read Write
Community
Telnet
Enable
by Telnet
SSH
Enable
by SSH
1.
switch04-d
Ok
Ok
Ok(Primary Successful)
Ok(Primary Successful)
Failed to connect.
Did Not Try
1.
switch03-d
Ok
Ok
Ok(Primary Successful)
Ok(Primary Successful)
Ok(Primary Successful)
Ok(Primary Successful)
But the job fails again cause telnet authentication failed on device 3 times.
I do not understand why LMS does not use ssh if possible at the finish of the job? Why telnet authentication fails ?
Thanks in advance.

Software images Cisco Prime Infrastructure

Hi,
I have Cisco Prime infrastructure 2.0 and all it works ok except when i try to get software image from device. I don´t see any device, so i can´t select any device and I get "RSL error".
When i try to access "Operate" > "Configuration Archives", i get the same error.
The machine from where I navigate has last "flash player" version and it has all requeriments.
Which can be the problem?
Thanks.

Hi!
I have experience the same problem under different tools in PI. I did notice it first under “Deploy>Monitoring deployment>Interface Health template>deploy and I get the 2032 error.
I have learn that this occurs when you use a client with no internet connection and you try to start above deployment tools.
What happens is that when you try to open such page in PI web interface, the flash player starts and try to get some files on the PI but the URL it get from the PI application points to a library that do not contains the file (Bug in PI?). The files the flash player looks for is called something like framework_4.5.1.21328.swz and spark_4.5.1.21328.swz and so on. The url from PI looks like https://PI_Server/webacs/applications/SAMDeployTemplate/js/framework_4.5.1.21328.swz but the file is missing.
The flash player have a backup way to get the xxxxxx.swz files it needs. If it can’t find the files in the application, it try to get it from Adobe http://fpdownload.adobe.com . But in my case my client can’t access internet so I get the error 2032.
I have another installation at another site that allows internet access everything works fine. The flash player can load the files it needs and store them locally on the client PC. Then I can take that PC back to the another site with no internet access where I did get the 2032 error and now It works fine because the flash player have the files it needs to handle the PI application.
I have a case open and it has not been solved yet.
Mattias.S

CSS11501 Upgrade Problem - can't remove software image

Hi,
We have a CSS11501 which came pre-installed with software version 7.20 (Build 206).
I wanted to upgrade this to version 7.40, so our supplier sent us a CD with the software image.
The install failed, because the supplier sent us the wrong image (ap0500037s.adi).
They then sent us another cd, with the correct image (sg0740004.adi-gz) ...
... however, I couldn't upgrade to this version, because the system now has two software images (the original 7.20 and the ap0500037s.adi).
When I try to remove the incorrect image, the CSS says that it doesn't exist.
When I try to install an image, it says I have to remove one of the other images first.
I don't really want to have to remove 7.20, just in case I have to roll-back for some reason.
Any ideas?

Gilles,
I went into offdm, but the same thing happened.
I selected the option to delete an image, but there was only one image listed, and that was the currently working one (which I really want to keep, in case I need to roll-back).
When I use the upgrade command, it says 'you have to remove one of the images, would you like to delete ap0500037s.adi?' I select yes, but it won't delete.
Are there any alternatives to formatting the disk?
Thanks,
Paul.

Make to compile the Petalinux software image, but "returned an error code (127) ;make[1]: *** [pkg_stagefs] Error 255"

Hello,
I am trying ot make to compile the Petalinux software image( make in $PETALINUX/software/petalinux-dist) . Refer to the UG977 PetaLinux SDK Getting Started Guide.pdf
However, when it gets to "[INFO ] Expanding stagefs", there is be an error . How can i do it?
My petalinux was installed in Debian-6.0.6-amd64 OS Host (in VirtualBox on my win7).
Thanks in advance!
Here is my PetaLinux compilation progress output:
$PETALINUX/software/petalinux-dist$ make
[INFO ] Saving previous build.log
[INFO ] Building ucfront tool
[INFO ] Building kernel
[INFO ] Building kernel modules
[INFO ] Building include
[INFO ] Building rootfs
[INFO ] Setting up stage config
[INFO ] Setting up romfs config
[INFO ] Updating for microblazeel-v830-bs-cmp-mh-div
[INFO ] Updating package manager
[INFO ] Expanding stagefs
[ERROR] E: Sub-process /home/focs/petalinux-v2013.04-final-full/software/petalinux-dist/tools/packagemanager/bin/dpkg returned an error code (127)
[00:02] \ make[1]: *** [pkg_stagefs] Error 255
make: *** [subdirs] Error 1

I am seeing the same error.
Environment:
Host PC : CentOS-6.5-x86_64
Xilinx Tools: Vivado 2013.3
PetaLinux Release: 2013.10
Page 11 of The Petalinux Installation guide document shows the packages required for Petalinux installation in the 1st column. I have installed all these packages except libstdc++-4.4.6-4.el6.i686. The only version readily available was libstdc++-4.4.7-4.el6.i686.
http://www.xilinx.com/support/documentation/sw_manuals/petalinux2013_10/ug976-petalinux-installation.pdf
sudo yum install dos2unix iproute gawk gcc git gnutls-devel net-tools ncurses-devel tftp-server zlib-devel flex bison libstdc++-devel.i686 glibc.i686 libgcc.i686
Loaded plugins: fastestmirror, refresh-packagekit, security
Loading mirror speeds from cached hostfile
* base: centos.mirror.lstn.net
* extras: mirror.ubiquityservers.com
* updates: centos.gravityfish.com
Setting up Install Process
Package dos2unix-3.1-37.el6.x86_64 already installed and latest version
Package iproute-2.6.32-31.el6.x86_64 already installed and latest version
Package gawk-3.1.7-10.el6.x86_64 already installed and latest version
Package gcc-4.4.7-4.el6.x86_64 already installed and latest version
Package git-1.7.1-3.el6_4.1.x86_64 already installed and latest version
Package gnutls-devel-2.8.5-10.el6_4.2.x86_64 already installed and latest version
Package net-tools-1.60-110.el6_2.x86_64 already installed and latest version
Package ncurses-devel-5.7-3.20090208.el6.x86_64 already installed and latest version
Package tftp-server-0.49-7.el6.x86_64 already installed and latest version
Package zlib-devel-1.2.3-29.el6.x86_64 already installed and latest version
Package flex-2.5.35-8.el6.x86_64 already installed and latest version
Package bison-2.4.1-5.el6.x86_64 already installed and latest version
Package libstdc++-devel-4.4.7-4.el6.i686 already installed and latest version
Package glibc-2.12-1.132.el6.i686 already installed and latest version
Package libgcc-4.4.7-4.el6.i686 already installed and latest version
Nothing to do
When I run petalinux-buiild from the project Xilinx-ZC702-2013.3 directory, I see the same error.
$ cd petalinux-v2013.10-final/
$ source settings.sh
PetaLinux environment set to '/home/logic/petalinux-v2013.10-final'
INFO: Checking free disk space
INFO: Checking installed tools
INFO: Checking installed development libraries
INFO: Checking network and other services
$ cd ../Xilinx-ZC702-2013.3/
$ petalinux-build
INFO: Checking component...
INFO: Generating make files and build linux
INFO: Generating make files for the subcomponents of linux
INFO: Building linux
[INFO ] pre-build linux/rootfs/fwupgrade
[INFO ] pre-build linux/rootfs/peekpoke
[INFO ] pre-build linux/rootfs/uWeb
[INFO ] build linux/kernel
[INFO ] update linux/u-boot source
[INFO ] generate linux/u-boot configuration files
[INFO ] build linux/u-boot
[INFO ] Setting up stage config
[INFO ] Setting up rootfs config
[INFO ] Updating for armv7a-vfp-neon
[INFO ] Updating package manager
[INFO ] Expanding stagefs
[ERROR] E: Sub-process /home/logic/petalinux-v2013.10-final/tools/packagemanager/bin/dpkg returned an error code (127)
[ERROR] make[2]: *** [pkg_stagefs] Error 255
[ERROR] make[1]: *** [sub_build_component_/none/packages-repo/single/plnx-repo] Error 2
ERROR: Failed to build linux

Xcode cannot find the software image to install this version

Hello,
I have a iPhone 5 with 6.1.3 version. So, I get the message "xcode cannot find the software image to install this version" when I have connected to Organizer.
Why? Xcode version is the lastest 4.6.2 Abril 2013.
How to update the xcode in order to have an updated image for my iPhone 5?
Thank you
Jordi Saboya

Here is some more info on the error.
Builds fine and runs on iPhone simulator.
OS 10.5.4
XCode 3.1
iPhone 2.0
Is iPhone 3G supported?
Error message XCode when building to device.
"Your mobile device has encountered an unexpected error (0xE8000001)
during the install phase: Verifying application
Try disconnecting and powering off the device; then power the device on and reconnect it."
I did try that and it did not work.
Thanks again.

Xcode Software Image

I recently purchased a MacBook Air to learn how to make iOS apps, so I of coarse installed Xcode. Because my Macbook air is the new 2013 model, it came preinstalled with Mountain Lion, so my question is, where can I find a copy of the Moutain Lion Image for the Window> Organizer> Software Images tab in xcode.

You can't add a OS X image there. If you have a look at the sidebar, you will see your Mac listed, and there's no "Software Images" for it. That means that Software Images are only for the iPhone, iPad or iPod touch, by adding an iOS upgrade file

Software Images page in Cisco Prime Infrastructure 2.2 broken after installing patches

Earlier today we installed PI 2.2.1 POODLE Fix ( 1.0.0 ) and PI 2.2.1 Maintenance Release ( 1.0.0 ) on CPI 2.2. After reloading we get status 404 when navigating to Inventory > Device Management > Software Images.
Also found this error in Developer tools in Chrome:
Error: Unable to load applications/swim/jsp/ImageRepositoryTable.jsp?id=/ status:404
Does anyone know how to fix this?

Hello,
We are aware of this issue and have bug
CSCut07018 PI 2.2.1 with Device Pack 1 Error on Inventory- > Software Images
filed for the issue. Please keep up with that bug for resolution.
No workaround at this point.

What Software image / License required for ASR 1001

Hi,
I want to purchase Cisco ASR 1001 router, I need to run ssh , Crypto , IPSec VPN ( 3DES, ESP ) and Gre Tunnels on it.
i am confused with different IOS / Licenses of ASR 1001, can any one please suggest me with the part numbers that i need to put in for ordering ?
From my Vendor quote i can see that below is the part of the packege ( part number = ASR1001 )
SASR1001UK9
Cisco ASR1001 IOS XE - ENCRYPTION UNIVERSAL
but there is another Technology based license required and this is not included in the above part number packet so i need to know which one i need to buy from below?
ASR1001/ASR 1002-X Technology Package Licenses
SLASR1-IPB
Cisco ASR 1000 IP BASE License
SLASR1-AIS
Cisco ASR 1000 Advanced IP Services License
SLASR1-AES
Cisco ASR 1000 Advanced Enterprise Services License
SLASR1-IPB=
Cisco ASR 1000 IP BASE Paper PAK
L-SLASR1-IPB
Cisco ASR 1000 IP BASE E-Delivery PAK

There was a regression introduced in 3.5.1 where the Main-class attribute of the Coherence.jar was changed to a different main class leading to this effect.
The workaround is to specify the main class as part of the command line.
Assuming your current directory is the coherence home directory:
Start a cache server:
java -cp lib/coherence.jar com.tangosol.net.DefaultCacheServer Start the command line:
java -cp lib/coherence.jar com.tangosol.coherence.component.application.Console And the above is basically what the coherence.sh/.cmd and cache-server.sh/.cmd scripts do.
Edited by: Christer Fahlgren on Aug 31, 2009 10:06 AM

IOS Software Image Management

Hi,
I have encouter this problems when I was doing image retreival for certain device.
Attached are the problems faced
Anyone know the cause?

Hi Dave,
If your Goal is to upgarde the IOS of the devices via LMS then MANUALLY download the IOS Image from cisco.com
and use the FILE SYSTEM option to add the Image in the Software Repository
Then try to upgrade the IOS and see how it works.
Thanks
Afroz

Software Image Management in Prime LMS 4.2.3

In Software Repository Management I have added all the running images from our estate. The Status of each image is showing as "Not Available" even though I get the message "Image Status retrieved from Cisco.com successfully." when selecting Update Status. Should I see something more meaningful here?
Also when I run Patch Distribution I get "Failure" across the board - can anyone suggest a likely reason for this?

Hi Dave,
If your Goal is to upgarde the IOS of the devices via LMS then MANUALLY download the IOS Image from cisco.com
and use the FILE SYSTEM option to add the Image in the Software Repository
Then try to upgrade the IOS and see how it works.
Thanks
Afroz

Software Image for c3745 for MPLS/Multicast Test Lab

Looking to find an IOS Image for a c3745 that will support the "address-family ipv4 mdt" under BGP for Multicast. Can anybody assist me here. I have tried the Software Advisor without any success.
Thanks
Derek

Derek,
Sorry, I had read 3750. It is available starting with 12.4(20)T for the 3745.
Regards

Webcam software, Imaging device, Hp recovery manager

Firstly, I apologize for my English.
Second thing, I have HP Envy dv6 7210tx 3rd Gen. i7 having Windows 8.1, For the last few days, my laptop wasn't working properly. so i "Refresh" it by using a Win 8.1 DVD. After refeshing, My Integrated HP Truevision HD webcam was working properly but one day suddenly it stopped working. My Cyberlink youcam responded to Turn On the intergrated webcam. i dont know how to Turn it ON. I check the Device Manager, My device Manger doesn't has the "Imaging Device". but it had Hp webcam in Human Interface Manager. Unfortunately, I uninstalled it. I refreshed it again. Installed All the drivers again. People say webcam driver is included in Youcam Software. i did everything i could. but i neither have the imaging device nor the Hp webcam. Please Help.
the other thing, is there any Hp recovery manager for Hp envy dv6? because i didn't it even in the HP drivers for Envy dv6.

Hi FahadNagi,
Welcome to the HP Forums!
I would like to take a moment and thank you for using the forum, it is a great place to find answers. For you to have the best experience in the HP forum, I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand you are having an issue with your Webcam. You are getting a message that it is turned off and to turn it on.
You can enable and disable devices in Device Manager.
If you have uninstalled the software, you can download and reinstall it from the web page. HP ENVY dv6-7210tx Notebook PC Drivers
You can also try running The HP Support Assistant to aid with HP updates and resolving issues.
Have you ran the built in troubleshooter in Windows 8.1 Using Automated Troubleshooting (Windows 8)
Have you done all your Windows updates?
You can also reinstall the software from recovery manager. Using Recovery Manager to Restore Software and Drivers (Windows 8)
You also inquired about a recovery Performing an HP System Recovery (Windows 8)
You will be presented the opportunity to backup your personal files to prevent data loss, during the recovery process. If you have not done one recently, I suggest you do one now.
Restoring Files that were Backed Up Using HP Recovery Manager (Windows 8)
I hope this helps.
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

ASR Software Image Doubt

Similar Messages

Maybe you are looking for