Assigning Components to Operations in Maintenance Orders

Dear Masters,
I want to assign the component reservation to the operation number in the maintenance order (i.e., In a breakdown order if I reserve a material component it should ask me for the operation number to which I want to link it to). Can anybody help me with this?
Please do help its a bit urgent. Thanks in advance.
Chin2

Hi Pushpa,
Thanks for taking time to reply to my question. I thinking you might be laughing at this stupid question of mine but sometimes the mind stops working.
Thanks once again.
Chin2

Similar Messages

  • Function module to get PRT for the operation in Maintenance Order

    Hi,
    Please tell me the function module to get PRT document for the all operation in Maintenance Order? and also tell me the FM to get all details of those PRT Docs so that I can Print those documents.
    Thanks.

    Hi,
    Please tell me the function module to get PRT document for the all operation in Maintenance Order in TCode IW31/32/33? and also tell me the Function Module to get all details of those PRT Documents so that I can take Print out of those documents.
    Thanks,
    Jay.

  • To Control status of the operations of maintenance orders individually

    Hi,
    To Control status of the operations of maintenance orders individually
    Anyone know how to control individually the operation status of maintenance orders?, see the image below?
    Exsample: I need complete (TECO) only the operation 0010
    Thanks,
    Adilson Delfino

    Adilson Delfino
    The system-statuses cannot be set manually by the user (like you can with user-statuses).
    You need to process a function to make these statuses change, e.g. releasing the order header, TECOing and order or dispatching operations. Alternatively you can develop a solution that may be able to change these statuses (see above post).
    I don't think you will be able to set the TECO status on individual operations.
    Have you considered user-statuses on the operations?
    PeteA

  • BAPI or FM to assign / create service master in maintenance order

    Hi Experts,
    Can you please help which BAPI or FM to assign / create service master in maintenance order during the creation of order.
    Thanks,
    Suresh

    Hi Suresh Babu,
    Look at BAPI_ALM_ORDER_MAINTAIN from IBAPI_ALM_ORDER function group.
    As customer enhancement you can use IBAPI_ALM_ORD_MODIFY.
    In help documentation you can find more information with examples.
    Bear in mind that using the BAPI to process the order data cannot support all the functions of the transaction.
    Regards
    Pawel Pyda

  • Component materials incorrectly assigned to superior operation in process order

    One of my manufacturing facilities is having a problem with components not printing on process order output.
    In all cases, the master recipes themselves look fine when reviewed in C203.  The components are properly allocated to phases (not superior operations).  But when the process orders are generated, certain components are being assigned in the process orders themselves to the first superior operation, instead of to the phase that is indicated in the master recipe.  Here is an example.
    Here is the master recipe operation information as seen in C203:
    And here is the material assignment list as seen in C203.  Note that component material MM6030 is assigned to Phase 0035:
    But when the process order is created, that same component material MM6030 is now assigned to superior operation 0001:
    Here is some additional information that I was able to eke out of the folks at the manufacturing facility:
    The operations in the master recipe did NOT originally contain operation 0001.  It was added to the recipe in C202 after the recipe was initially saved.
    Component Material MM6030 was not originally part of the BOM.  It was added via C202 after the recipe was initially saved.  A different material was originally in its place, and was assigned to a different phase.  After the MM6030 was added to the BOM, the assignment field was blank, and the user assigned it to phase 0035.
    Has anyone ever encountered a similar issue?  If so, how was it resolved?

    Hi ,
    Possibility  , in C202 , user may have changes the BOM first and re-assign the phase  but in process order level Read PP master did not call
    Another possibility manually change the process order component and assign this in Phase in COR2 .Please check  whether it has been added manually in order level . 
    Regards
    JH

  • Set up correlative numbers of operations of maintenance orders

    Hello.
    I need set up the numbers of operations of an maintenance order, now the system assign the operations numbers(vornr) of the task list.
    It is making huge gaps in the counter, raising overflow in the top number (9999).
    I need that the system set up (1,2.3.4 ...) .
    This issue is very urgent for me.
    Best Regards.
    advice: I'll give many points!!

    To send the spreadsheet to others, open Numbers on your iPad, tap the share icoun (box with upward facing arrow), select Send a Copy, tap the spreadsheet you want to send, tap Mail, choose the format you want send, then address the email.

  • Assignment of G/L on Maintenance Order Internal Component

    Hi,
    I can specify G/L of my choice on Maintenance Order (PM Maintenance Order) for external components ( Non Stock Items) but unable to do so for Internal Components(Stock Items). Is there any configuration which could allow me to specify G/L of my choice for an internal component  attached on a Maintenance Order?

    Lets take a scenario
    Suppose i have got some stock in my store, the time i bought them i was not sure where i m going to use them..i have three departments Admin, IT and Production. That particular stock item can be utilized in either of three categories. The purpose of giving my own GL on Maintenance Order was to see the utilization of that stock item under the head for which the Maintenance Order was created i.e.
    if the maintenance activity is being performed in Admin the usage of the material should managed under GLs of Admin. By the way, does it really make sense ?

  • Need help on to set User status for Operations in Maintenance order

    Hi experts,
    i am new to PM module.
    i need to do BDC for IW31. i want to know some inforamtion
    on user status for each opertaion.
    my problem is ,, what is user status.
    why it is saying order is not yet released when saving and status can not set.
    in this cases how can i do BDC.

    User status are something set in the configuration and specific to the company which SAP hasn't given in the system status.
    May be in your system user status are configured to set only  after the release of the order.
    For doing the userstatus you may need to release the order, you can release the order thru bdc and then do bdc for user status. Also see below link
    http://www.sap-img.com/plant/user-status-set-date-in-maintenance-order.htm

  • Assigning mic in operations of production order for newly inserted oprt

    Hi, Please advise how to assign mic to the newly inserted operation of the prod order?i mean say 3 operations copied form master data. we added a 4th operation manully. i want to assign new inspection characterstics to the 4th opration. plese advse.

    Dear Raju
    1) Go to CA02
    2) go to header
    3) Maintain inspection Point as 150
    4) Maintain partial Lot Assign as partial lot assignment according to plant default
    5) At Operation level maintain a QM work center ( testing ) with Control key QM04 ( as per your requirement)
    6) double click on the control key and go to Quality Management : Inspection points
    7) Maintain Inspection point completion : Quantity , Valuation and confirmation ( as per your need , you can select other options also) press F1 and see the impact of each
    8) choose time related and keep Tfac 1 and Unit as HR ( As needed)
    9) You can select quantity - related also and then maintain the quantity.
    10) Select the QM operation and maintain in the MIC
    Regards
    Gajesh

  • Relation Between PR item and Operations Maintenance Order

    I have a PR from Maintenance Order.
    there are 2 Operation External in Maintenance Order. usually it will create 2 item PR Service. but in my case it's create 3 PR item Service.
    I look on the IW33(Display Maintenance Order).
    Operation 10, becomes PR Service Item 10
    Operation 20, becomes PR service item 30
    and there is 1 another PR service item 20.
    I see in the Tab Account Assignment. it's refer to the same order. but i don't know where is the Operation. the question is How to delete this Item when we don't know the Operation in Maintenance Order. or maybe how to know what is the Operation.?
    Thanks.

    Hi Ajit Kumar.
    No i'm sure that PR item 20 is not with a delte flag. Actually user want to delete the PR item 20. so he try to delete the Operation 10 in Maintenance Order. but when he do this, PR item 10 was deleted and not PR item 20.
    Thanks for your Reply.
    Hi Jürgen L.
    Yes i know how to display Deletion in Maintenance Order. and i'm sure when i do that. the operation for PR item 20 are not listed.
    BTW. do you know  how to undelete the operation.
    Thanks for your Reply.

  • Operation long text not coming in print priview of maintenance order

    Hi Experts,
    I am facing problem in getting the long text of operation of maintenance order( generated from maintenance plan) in the print preview because of which long text of opeartion is not showing in the print out of order but other things are coming in the printout except the long text.This is happening for the first time.Earlier long text was coming in the print of order.Can anybody suggest the possible cause behind this & solution for this problem asap.
    Thanks.

    Hello,
    Please check The IP30 batch job schedule in which LOG IN language it is schedulde for those manitenance plan.If same it is diffrent what as Long text language then it will not come in Ordre OpRN long text.
    Reagrds,
    Rakesh
    Edited by: RAKESH ASHOK MANE on Aug 18, 2010 3:46 PM

  • Delete assignment of work approval document to Maintenance Order

    Hello Experts,
    In wcm(enhanced model), I have created and assigned one work approval to Maintenance order.
    Now I am not able to delete the assignment to the maintenance order. I have checked both the cases when work approval is set as prepared and also when it is not set as prepared.
    Is there any possibility..
    Thanks

    Hello Experts,
    The requirement here is - whether we can extend the validity of a work approval document after setting to status 'Prepared'. WAP is assigned to a maintenance order.
    Thanks for your input on this.

  • How to assign the budget to maintenance order

    Dear PM Guru's,
    I like to know the how to assign the budget for a maintenance order. how we control the expenses from a maintenance order. suppose for a small work manangement assigns budget as 2lacs. now i like to restrict if any thing purchased once budget reached to 2lacs system should populates the error message to restrict the creation of Purchase orders / material requisitions and some other issues. Please suggest me how i can map in SAP? if any one have full documentatioin regard this please send through mail.
    thanks in advance to all of PM Guru's.
    regards
    Jalu

    Hi,
    There are different approaches for budget control in PM orders.
    1) Option1: In koab transaction maintain commitment managemen active and in budget profile (oioa) you must tick total values ,annual values,activation type should be 1-automatic activated when budget allocation done. Then distribute budget in PM order through KO22.
    2) Option2:You can also opt for Investment management approach but it is mainly done in case of capital work/projects/internal orders. In this approach you need to activate IM for orders(done by CO people). Investment programs are created and budget distributed through IM52. For details you may consult your FICO consulatnt.
    3) Option3: Fund Management approach enables you to monitor budget-relevant plant maintenance processes. enables you to monitor budget-relevant plant maintenance processes in FM.
    The link between the plant maintenance process and FM is established by entering an FM account assignment (commitment item, funds center, and fund) when you create a plant maintenance order.
    You have to enter the FM account assignment manually. If, however, you have maintained the assignments of FM account assignments to CO account assignments, the system determines the FM account assignment from the cost center of the technical object (functional location, equipment) which is assigned to the plant maintenance order.
    FM takes care of budget related processes from creation of maintenance order till settlement.
    Hope this helps you to decide an appropiate approach.
    Regards,
    S.Basu
    Edited by: S Basu on Nov 10, 2011 5:34 PM
    Edited by: S Basu on Nov 10, 2011 5:34 PM

  • Short text from notification not to be copied in maintenance order

    Hi
    My user requirement is that when a notification is created , the short text of notification is NOT TO BE COPIED IN work order as short text and first operation of work order.
    Any one have any idea .

    Hello,
    Please follow below SPRO path
    Plant Maintenance and Customer Service>Maintenance and Service Processing>Maintenance and Service Orders>Functions and Settings for Order Types>Define Notification- and Order Integration
    Put the required order Type and Notification type together in this Configuration and for Coloumn Enhanced Object List
    selectOption>Assignment of operations to object list entries inactive
    (The enhanced functions for the object list are inactive. That means, an assignment of the operations of the order to entries in the object list is not possible.)
    Regards,
    Rakesh

  • Duplicate maintenance order

    Hi,
    If i have one maintenance order and technician is working on this.now system should not allow for another maintenance order.
    since people are creating duplicate maintenance order for same problem.

    Can you give some details as to the proces you are using as the SAP standard process is that when a fault is found then the end user creates a notification this is then converted into an order if work needs to e carried out. If the same fault is reported again then SAP provides the facility that you can assign multiple notifications to one maintenance order. This reduces the likely hood of multiple maintenances orders for the same job.
    Jim

Maybe you are looking for