Assigning Number (Internal)based on the Employee Groups

Hi Experts,
Can i Assign Number (Internal) automatically based upon their employee Groups
Ex- Employee Group A (100000 - 200000)
      Employee Group B (200001 - 300000)
      Employee Group C (500001 - 700000)
      Employee Group D (700001 - 900000)
whenever i select the employee Group in the 0000 infotype system has to internally assign the number falls under that employee group.
Thanks in advance
Regards,
Dolly

Go to SPRO->PM->PA->Basic Settings->Maintain number range intervals for personnel numbers. In this define the Number ranges  as below
Ex- Employee Group A (100000 - 200000)
Employee Group B (200001 - 300000)
Employee Group C (500001 - 700000)
Employee Group D (700001 - 900000)
and then use the feature NUMKR to determine the personnel number range interval according to the employee subgroup.
Hope this will solve your problem.
Thanks,
Amar

Similar Messages

  • 2 Repeating Frames based on the same group

    I have this report which contains 3 groups, I have the requirement to break the 2nd group so that I create a 'footer' based on the 2nd group.
    I have created 2 repeating frames (one which holds the account number, payment terms, currency) and the 2nd repeating frame based on the same group which contains the bank details
    My report looks like this:
    (1st Group)
    Customer xxxxx
    Address xxxxx
    (2nd Group)
    Account No xxxxx
    Payment Terms xxxxx
    Currency xxx
    (3rd Group -repeating)
    Trans id xxx
    amount xxx
    (2nd Group)
    Bank Details xxxxxxxxxx <--will only have one per account
    I had originally designed the report using 2 identical frame structure.
    e.g.
    Main
    Repeating Group Customer
    Repeating Group Account
    Repeating Group Transactions
    Footer
    Repeating Group Customer
    Repeating Group Account
    This format worked when the Main group did not go over a page. The 2 Account Groups were coordinated.
    When the Main group extended to more than one page, the 2 Account Groups did not match.
    The jest of what I am trying to do is a footer of the bank details be printed at the bottom of the page always.
    Any suggestions would be greatly appreciated!!!

    I didn't realise that this was such a difficult problem to solve. The requirements are quite simple (I thought)
    1) Query
    3) Groups
    a) Company
    b) Accounts
    c) Transactions
    My report needs to look like this:
    {page 1}
    COMPANY XXXXX
    ACCOUNT: 123
    Invoice ID Amount
    aaaaaaaaaa 111.11
    bbbbbbbb 111.11
    Sub Total 222.22
    --> To be printed at a predefined space on the physical page on each page. bold Bank Details for Account 123: xxxx bold
    {page 2}
    COMPANY XXXXX
    ACCOUNT: 456
    Invoice ID Amount
    aaa 10
    bbb 20
    ccc 30
    ddd 40
    ....<as many records that will force a second page
    --> but..this still needs to print!!!To be printed at a predefined space on the physical page on each page. bold Bank Details for Account 456: xxxx bold
    {page 3}
    zzz 100
    Sub Total 1000
    --> To be printed at a predefined space on the physical page on each page. bold Bank Details for Account 456: xxxx bold
    Say the next records in the query are for
    COMPANY XXXXX, ACCOUNT 789 with one detail record.
    COMPANY XXXXX, ACCOUNT 321 with multiple details records which will force a second page.
    What is happening at the moment is that the 2 repeating frames based on the Account Group,
    the first 2 pages will print out correctly, however, because the 2nd account goes over 2 pages and how I have this set the structure of the report (see above post), the bottom Account Group thinks that the account number is now 789 when in fact the top account group is still on 456
    I really hope that this is clearer.
    I am working on Reports 10g on a 10g database
    I have tried to create a ref cursor & separate the query to bring back bank details. but with no luck.
    A person had suggested that I create a separate frame and hold the bank details, which is fine. but as I previously stated, those bank details need to print on every page at a specific area on the physical page.
    If this might be of use:
    Repeating Frame Group Customer, Vertical & Horizontal elasticity Fixed
    Repeating Frame Group Account, Vertical Elasticity: Variable & Horizontal - Fixed
    Repeating Frame Group Transations, Vertical Elasticity: Expand & Horizontal - Fixed

  • How to hide iviews based on the user groups?

    Hi,
    I have a custom role with workset, page and iviews.
    The page has 5 iviews.
    User group1 can see 5 iviews in the page.
    Now user group2 wants see only 3 iviews in the page (same role).
    Without creating another role for user group2, How can I hide the iviews based on the user group?
    Is this possible?
    Thanks
    Sundar

    Hi Sundar,
    I guess to achieve this, you have to set the permissions at iView level.
    For this, go to System Admin -> Permissions -> Portal Permissions. Now navigate to your iView using the folder structure, do right-click on the iView and click on Open Permissions.
    Search for the particular group and add that and assign the privileges accordingly. You can remove Everyone group from the iView .
    Hope this will solve your problem.
    Regards,
    Saurabh Mathur

  • The employee grouping for account determination

    Dear experts!
    Now, I'm getting some issues about The employee grouping for account determination.
    - The first, when I define Employee grouping for account determination, after that I want to know How do I can assign Employee to Employee grouping for account determination.
    - Second, where is I can assign employee group, employee subgroup to Employee grouping for account determination?
    Help me, please!
    Regards Huy!

    First you go to Employee grouping for account determination and make two groups for two Company codes or EE Groups or EE subgroups Etc then assign to company codes In the Standard feature PPMOD Now in the table where you assign Symbolic to GL accounts you assign same symbolic with different groups like this.
    Example:
    Symolic A/C            EE Group for acc determination                                                GL
    001                                    1                                                                                2010201
    001                                    2                                                                               2010202
    Regards.
    Muhammad Afrasyab

  • Assign price list based on value in Group field

    Hi,
    Is there a simple way to make the default price list for a customer based on the customer group value when creating/update a BP master data?
    i.e..When I create a new Business Partner, I choose group = wholesaler. I want the price list (under payment terms tab) to default automatically to the 'wholesaler' price list.
    Purpose of this is so that the new business partner gets the correct pricing as per what i have set up under price lists/volume discounts etc...
    thanks

    Dear Maeve Cahillane,
    As per your expanation you want to assing the Price list to payment terms.
    if you 10 customer groups and you want to assing the your payment terms to 4 of them so you cant do this for that you need to creat 4 payment terms base on customer group.
    The best and simple way you creat the your price list base on customer group, for that you may be use factor fuction.
    by way of FMS you can refresh Customer Master> payment terms Tab > Price List.
    my it help you.
    Regards
    MANGESH PAGDAHRE.

  • How do I assign a user ID to the purchasing group so it shows up on table..

    How do I assign a user ID to the purchasing group so it shows up on table T024?  I'm trying to create a STO but am recieving the following error
    Configuration of User ID is not set up in purchasing group T024 table
        Message no. 00398
    Diagnosis
        Placeholder for batch input error text, this message is not output.
        Configuration of User ID is not set up in   purchasing group T024 table
    Thanks in advance

    Table T024 has no field for a user-Id in standard SAP
    you can only tie a user to a purchsing group via authorization with user roles.
    The message 00398 is a generic message that can be used for everything.
    I guess this message is triggered in a userexit. Designed by a collegue of you.

  • Make field in Material master mandatory based on the material group

    Hello all,
    I need to make the field "post to inspection flag" mandatory based on the material group while creating the Material master.
    I found options for making the field mandatory based on Material type,Industry sector and plant NOT based on the material group.
    Could anyone please provide suggestions on setting up the field as mandatory based on material group while creating material master
    Thanks,
    Sre

    Hi Sre,
    You can make Material Group field as Mandatory while Creating Material Master.
    SPRO>Log General>Material Master>Field Selection>Maintain Field Selection for Data Screens
    Select Screen # 48
    In the Field selection (Field Ref.) of (MARA - MAKTL) screen , Change the settings from Optional to Required Entry for T Codes MM01, MM02 or you can select the Material Type ;
    Please note this  by choosing this selection the fields of Profit Center and  Division will also become Mandatory.
    Hope this helps,
    Best regards
    Amit Bakshi

  • Activity RTE based on the employee Sal who's Time will be captured in CATS

    Hi All,
    I have a scenario to calulate the Activity Rate  based on the employee Salary who's Time will be captured in CATS.
    Eg: One Employee working 2hrs in Admin dept,4 hrs for Rec dept, & 4 hrs for HR dept generally costing will take place on the fixed price from the controliing side. In Our scenario the activity rate should be calculated on the Employee salary we found one user exit Using an SAP enhancement (CATS0002). need to explore on this  before that  If any one has some good solution or suggestion please suggest.
    Regards,
    Raghu Kumar R

    hi
    you can do the coding in the said user exit , and have the hourly rate calculated by taking data from infotype 8 , 14,15, etc where ever the releavant fixed salary components you are maintaining.
    But the issue would be if you go for retro accounting for any of the employees , the cost uploaded in the existing items would remain uneffected also if there are some adhoc earnings that are given later point in time after the rate calculation for a particular day has already been done and data has been passed to co or ps etc. There would be definately a issue for the change in master data happening at later point in time.
    You may consider using some third party solutions which are available for this purpose.
    Regards
    sameer

  • PCR Based on Employee Group

    How to write a PCR for allowing the different types of WAGETYPES  based on different employee groups?

    Hi,
    Also, you can check the below link which can be helpful for writing a PCR;
    http://wiki.sdn.sap.com/wiki/display/ERPHCM/PayrollSchemasandPersonnelCalculationRules%28PCR%27s%29
    Regards,
    Prasad Lad

  • Employee group have been wrongly assigned during Hiring in PA40

    Dear Guru,
    I have one scenario where an employee; employee group have been wrongly assigned during Hiring PA40. The user has entered and assigned the employee group as Contract - Local instead of Contract - Foreigner in the Employee group field.
    Please advice how to change and rectify this incident.
    Thanks & Regards,
    Wai Cheng - Yokota

    Dear Guru,
    Many thanks for all your advice.
    I have use PA41 Transaction code to make the correction. However, I noted that the wrongly assigned Employee group remains unchanged in PA30 HR Master data.
    Hence, I decided to use PA40 Hiring Action to make the correction by selecting Position/Band Change field. After save the correction in Copy Actions screen, it will lead you to Copy Organizational Assignment and save your entries. There will be a message appear at the bottom in regards to the position. Just click next arrow icon and click yes.
    Go to PA30 HR Master data again, to verify that the correction and noted that it has change.
    Regards,
    Wai Cheng - Yokota

  • Defining / Assigning Employee Groups and Sub Groups.

    I have defined a Personnel Area for e.g Barron Hotels - London  BH01 and Barron Hotels - Manchester - BH02.  I have also defined  there respective Personnel Subareas.
    What exact steps much I take to define the Employee Group and Employee Sub Groups and how do I link (Assign) them to corresponding  the Personnel Area  and Personnel subareas  defined above.
    Can some one please show me the exact steps. I have heard SM30  and V_503_ALL  mentioned but how  exactly are these used.
    Many thanks.

    Hi Tomuri,
    There is no link between EG-ESGs and Personnel Area -Subareas..  All these form an Enterprise Structure for an organisation and it can be seen against an employee in IT0001 - Org Assignment.
    Well, you have created PA as well as PSAs.  Now what you do is, similarly create EG- ESGs.. say for example..
    Emplyee Groups as A- Associate, B- Managers... etc...
    Employee Subgropus as A1, A2,..  B1, B2.. etc...
    Path: IMG-> Enterprise structure->Definition->Human Resources Management-> Employee Groups and
    -> Employee Subgroups
    When you create Personnel Areas.. you need to assign them to a Company Code...
    Path: IMG-> Enterprise structure->Assignment->Human Resources Management-> Assign Personnel Area to Company Code
    Similarly, when you create Employee Subgroups, you assign it to Employee Groups (EGs)
    Path: IMG-> Enterprise structure->Assignment->Human Resources Management
    -> Assign employee subgroup to employee group
    Next is the table you mentioned in your query... V_503_ALL... this clubs the groupings for -> ES grouping for collective agreement provision, Employee subgroup grouping for primary wage types, time quota types, work schedule etc,,, these are according to company requirements..
    For any further queires, do reply...
    I hope the information proveded helps you...
    Award points if the query was resolved...
    Good luck..
    Regards,
    Shweta

  • Assigning Employee to Employee Groups

    Hi All,
                    How to Assign a employee to the Employee Group in EIC..?
                    What BADI Implementation Should i use?
                    Should i create a BADI?
    Regards,
    Rajesh.T

    Hi Rajesh,
    Can you explain me clearly whether u want to assign an employee to your employee group or weaht else. If you want to assign an employee group to an employee you can do it in PA30 or otherwise if you want to do it default for a company(org Unit) or Position u can do it in PP01.
    Thanks
    Cheers
    JS

  • What is the basis for Employee Group & Employee Sub Group?

    Dear Consultants,
    1) How to finalize the Employee Group and Employee Sub Group?
    2) What points should be taken into consideration before finalizing Employee Group and Employee Sub Group?
    3) In which places we can use Employee Group?
    4) In which place we can use Employee Sub Group?
    5) What items/sub-modules in SAP-HR largely depends on Employee Group and Employee Sub Group?
    6) What kind of problem could arise with wrong Employee Group and Employee Sub Group?
    Let's have the answer for this question, which could help all the members.

    An organizational unit for which personnel provisions can be specified.
    Example
    Employee groups:
    Active employees
    Employees who have left the company
    Company pensioners
    Employee subgroups within the "active employee" group:
    Industrial workers
    Commercial employees
    Technical employees
    Employee subgroup
    An organizational unit within an employee group for which personnel provisions have been defined.
    ESG groupings
    Grouping of employee subroups in Payroll for the following purposes:
    Work schedule
    Personnel calculation rules
    Primary wage types
    Collective agreement rules
    Time quota types
    Account determination

  • Default Employee group based on Actions

    Hi All,
    It would be a great help if you can let me know that can we default the Employee group for any particular action in the IT0000 screen.
    ASAP help is appreciated.
    Thanks and Regards
    Swati

    Hi
    you can do the default for employee group and employee subgroup in it0000.
    you need to maintain it1008 and IT1013(employee group and subgroup) for particular postion and also ""employee attributes "" if u done these  then, when you go for hiring in pa40 it0000 in position field select the positon and press enter then the defaults will be get by the system.
    Regards
    Suresh

  • Creation of new employee groups and sub groups

    Hi All,
    What all the steps should I follow to create new employee groups and sub groups? and  How many structures should I create for this?
    Its urgent pls.......
    Good replies will be rewarded!!!!
    Regards,
    Sita

    Hi
    You can create the employee groups depending up on your clients requirement, Eg: Permanent, Temporary, Seasonal, Trainee, Advisor etc
    And define the employee subgroups and assign them to the employee groups Like
    Enterprise structure>Definition>Human Resource Management-->Employee Groups & Employee Groups
    Enterprise structure>Assignment>Human Resource Management-->Assign employee subgroup to employee group
    you can create employee subgroups depending up on your requirement like asst manager, manager, GM, MD, VP ETC an assign them to the employee subgroups ok.
    Ensure that certain empployee subgroups may not be assigned to employee group based on requiremen, but create all the employee sub groups which is existing in the organization.
    Regards

Maybe you are looking for

  • Can any apps be downloaded to the ipod mini?

    Can any apps be added or downloaded to the IPOD MINI?

  • 8.10.01 Installed, not stamped correctly

    After installing the 8.00c.10.01 fix, I checked the engine version and it still says 8.00c.10.00.  Is the posted patch correct and it is just a labeling problem?  Thanks, dvn

  • SLD deleted and SWCV remaining in IR - what now?

    Hello, strange situation: There was the idea to build up the SLD new. Don´t ask why... So the basis guy deleted the old SLD and created a new one. All the content from our own SWCV created there was lost! Unfortunately we had some SWCV with interface

  • Why does the Notes app keep crashing?

    Does anybody know why the app 'Notes', that comes standard with OS X Mountain Lion, keeps crashing everytime I try and open it?? I hope the people at Apple figure this problem out soon...all my notes from my classes are on that app!!!

  • IPad Mini mirroring problem

    I have 3rd gen Apple TV, Ipad Mini with retina and Iphone 6. Iphone 6 mirroring works fine IPad mini no option to mirror offered.- same with both my parents IPad minis, none of them will mirror Any suggestions gratefully received.