Assignment Status Change Requirement.

Hi Experts ,
We have a requirement in a HR report , where we have to capture the "Data Entry" date for assignment status change.
for example :
If an employee assignment status changed to inactive from active on 01-OCT-2012 , and the data entry into oracle is on 18-OCT-2012 , I have to capture the "date of entry into oracle i.e date of assignment status changed in Oracle , in this example 18-OCT-2012".
Initially i felt to use the "Last Updated Date" but if some data is changed in assignment form on 19-OCT-2012 in "CORRECTION" mode , the last updated will be override with "19-OCT-2012" , but the original date the assignment status changed is on 18-OCT-2012.
Any help or pointer please to achieve the requirement.
Thanks
VJ--

You need to audit the assignment table.
oracle.anilpassi.com/audit-changes-in-oracle-hrms.html

Similar Messages

CL20N Status changed: missing values for required chars for ROH & FERT

Dear Expert,
I am getting this message no. CL500 (Status changed: missing values for required chars) when I try to save variant class (Class type 300) assignment to material master (Raw Material) with Released 1 status in CL20N; but I do not get this message during assignment for FERT. I can save a FERT with Released1 status to a variant class without any system message. I am using configurable material in purchasing and this message is not valid in this case. Is there anywhere I can turn off this message for raw material just like FERT?
Regards,
HK

Hello Han Keat,
There are notes for this error message. Can you please check note 1537443 and 1431600 if it is in your system
Thanks Amber

Status changes in Problem not logged in Text assignment block

Hello,
when processing status changes via actions for example in ChaRM process, the status changes are logged in text assignment block.
But for problem or incident management the status changes are not logged in text assignment block.
How to do this?
Thanks and regards,
Jan

Hello,
sorry, but this is not working, action gets executed (I scheduled it when reaching status) but no update in text log happens.
Any other idea?
Regards

Changed Assignment Status.

Hi All
For an employee, I have changed the status from 'Active Assignment' to 'On Vacation with Salary' on 10-Apr-2008 and again to 'Active Assignment' on 20-Apr-2008. Now when I query for this employee through backend I am seeing 3 assignments.
I am using Asg_Status in fast formula calculations but as this employee has 3 assignments, which assignment will fast formula consider?
I am getting error for this employee and for the other employees whose status is not changed, there are no errors.
I have few doubts about this:
Which assignment status fast formula will consider while doing calculations?
How to take into consideration the various Assignment Status for calculations?Regards
Rahman

Hi Rahman
When you query the assignment table it shows 3 records that are active on different dates. So at one point of time there is only one record active. In your query you can add a condition that can check on current date which record is active like
select *
from per_all_assignments_f
where person_id = 1234
and sysdate between effective_start_date and effective_end_date

To create the follow up transaction automatically on status change in sap crm?

To create the follow up transaction automatically on status change in sap crm? If yes, how to make the setting for this?

Hi vishal,
As per the requirement transaction type is activity(ACTI) & sales order(TA). when the take order objective is complete system automaticaly craete a new activity of tele sales call or metting with wholesaler.
this is requirement of client.
now i am already create all type of transaction types of activity & sales order & create follow up transaction also. i have doam already create action profile also but when i am assign this action profile to transaction & try to create an sales order no follow up transaction could be create automatically. i think the condition is not right so please help me out in this. what should be the start & schedulec condition for this scenerio

SD OVERALL STATUS CHANGE

Hi Gents,
The requirement is that, there is trial Sales Order is there, which will not be invoice nothing will happen, it will just for trial...
So what i need is that once that trial is expire (7 days assumption), is there any way that this sales order should not show in Open Sales Order.
Rejection line item will not work for this as client not required.
So what i am trying that, is there any way to change the OVERALL STATUS to COMPLETE manually. So that i can go for back ground scheduling.
hope you will gents will respond asap.
Thanks in Advance !!!!
Regards,
Kundan

to create events from a status change use transaction BSVW see Maintaining the Assignment Between Status Change and Event - Roles in Workflow - SAP Library.
use the event to start a workflow, after approval/rejection use a background method to change the user status.

Field status changed!

Hi,
For a particular GL account which has Fields Status Group assigned for mandatory Business Area, the Business Area field is not available for input. This happened after a particular date. I did not detect any changes to the FSG. BA field has become 'Display' for this account in FB60. In MIRO the same account is picking up BA automatically.
Any clue what could have affected this?
Thanks
Muru

HI,
you said "...when I post to the same GL a/c using some other transaction, the field status is 'Required'." Check the posting keys in the accounting document and there field status in OB41. Compare this with the field status in the posting key where business area is only to be displayed.
Best regards, Christian

Sale Order Status Change after delivery of materials from projects

have ETO sccenario which consists of all modules such as SD,PS.PP etc. Materials will be procured from external vendors & manufactured inhouse through project systems. After delivery of materials from project systems, billing & invoicing will be done at sales level.
On delivery of materials from projects, sale order status remain open. Request you to look into the matter & suggest about status change of sale order after delivery / billing.
Regards,
Ranjan

Hi,
In sale order, WBSE is assigned. Delivery of materials are through cns0. then subsequently picking / packing / billing will happen at sales level. Billing is of delivery related. Please suggest to fix the issue.
Thanks & Regards,
Biplab Ranjan

Service Desk Settings, Automatic Email at status change of messages

Hello experts,
I need your help about this:
I am configuring Service Desk Specific Scenario Settings -> Automatic Email at status change.
I made the configuration suggested as described SAP Note 691303. Also I configured the status profile SLFN0001 in transaction DNO_CUST01, and the Action profile SLFN0001_STANDARD, both for the SLF1 (Service basis message), but still when we change the status of messages, the email is not generated in SCOT, overview of send orders.
I want to clarify that the configuration made for the action of send email was in transsaction SPPFCADM, selected DNO_NOTIF, and push Define Action Profile and Actions, then selected the Action profile SLFN0001_STANDARD for making he ocnfiguration as suggested in note 691303.
SCOT is correctly configured and working OK.
Business partners emails are mantained too.
Thank you very much.
Hector Longarte

Hello. Thanks to all of you for your comments. I am answering to your questions below:
Have you assign proper partner function to every status in action?
I do not know where can I make this assigment. I am thinking that this may be the cause. Please I kindly ask you to give me orientation about this.
Have you defined condition for defined action?
Yes, the condition was defined thru SPPFCADM. Now, I wonder if this must be configured for CRM_ORDER application as described in note 691303, or for DNO_NOTIF ??
Have you maintained user deatils on identification tab in BP?
Yes, the Business partners and emails adresses were correctly mantained.
The configuration we are talking about and you want to change, is it regarding SLFN (Service Desk Messages) or SLF1 (Basis Service Message)?
I supose that for Service desk messages we must configure SLFN, and not SLF1. Right?
In DNO_CUST01, we have SLF1. We have not made any configuration in DNO_CUST04, it is still as original standard. Please let me know if we are right.
You want to send an aut. email notification when status of SLF1 changes?
We want to send email notifications to the message creator about the status change of service desk messages.
Thank you very much.
Best regards.
Hector Longarte.

Status change from 'Completed' to 'In Process' not allowed

When configuring Appraisals in R/3 we want to change the Status of 'Completed' when pressing the 'Reject' button so that it moves to the Target Status of 'In Process'
However, we are getting an error message:
Status change from 'Completed' to 'In Process' not allowed
The SAP help states the following:
In Process (only if final appraisal or part appraisal is defined)
This has been defined at Template Level.
So I don't understand why we are getting the message.
Does any one else know of a way to configure the Appraisal template so that after it has been 'Rejected' it moves back into 'In Process'
Thanks
MN
Points Rewards!

Hello Andreas,
Ah, sorry, there was so much talk about user decisions that I assumed you were using a standard decision task.
Still, I would be extra careful of changing the way workflow usually works because you have an unknown target audience that are based on the standard.
The standard SAP philosophy is quite simple: cancel/F3 or do nothing and it stays reserved. If you do not want it reserved, you need to perform an action. This is based on a majority of processes: in most cases when you execute a work item you will also be the one who is going to completed it. Replacing it is the lesser used of the two alternatives, therefore it is the only one that requires an action on the part of the user.
Again, this is intended as constructive input. Strange quirks and unusual behaviour tend to add a black mark to software if they do not make things easier to use. In many environments users are not even aware of the reserve/replace business, so there you would be adding an additional layer of complexity.
Personally I would find an exit popup annoying as a regular workflow user - regular decisions can be approved with one click, or I can back out with a single click if I need to make a phone call or look up some info before approving - but with this new-fangled thing I've got an extra button to click and an extra thing to think about. This is especially the case in a payment approval scenario where you may have users in some departments who may approve hundreds of payments each week.
My suggestion would be to leave it like that. By all means put an option into the user decision to put it back or to 'un-reserve' it (and loop round if the user chooses it). That way you are adding value and not clicks.
Cheers,
Mike

How to read the status changed in crmd_order txn before saving it to DB.

hello all,
My requirement is to perform some checks after the user changes the status
( Before saving it to DB i need to do some checks )
I could find the BADI and Fm's for checking conditions.
My question is i need to check for a particular status change how do i trace that that particular status which i need to capture has been changed??
i could see some FM's but it is only fetching the staus save in DB.
how do i trace the status just after user changes before saving it to DB.
it's an urgent requirement............pls help me on this..........
pls get back to me if u want more details.........
Thanks,
Shiva.

Hello.
Have you figured this out yet? We are having the same problem.

Message No F5808 Field Assign. is a required field for G/L Account.

Hi Guys,
I have a problem when releasing a cancel credit memo billing document.
It shows the following error message:
Field Assign. is a required field for G/L Account.
Message No. F5808
Diagnosis,
The value field "Assign." in the interface to Financial Accounting is an initial value but you are required to make an entry in the field selection for G/L Account XXXX in company code XXXX linked to the field selection for posting key "50".
System Response
Error
Procedure
It might be an error in the configuration of the G/L account field selection. The initial application, used to call up the interface must otherwise define a value for field "Assign.". If this is the case, contact the consultant responsible for the application.

Hi,
The Assignment Number BSEG-ZUONR (I suppose "Assign." means it here.) field status for posting key and GL is optional and mandatory.
I think the GL Account SORT KEY in FS00 is the assignment selection for Billing to FI doc. Say if the SORT KEY is Posting Date, the assignment from Billing to FI Doc would be the date of posting.
But if the SORT KEY is blank ( This is case for my G/L account), the system will select the assignment written in Billing document header (VBRK-ZUONR).
I checked other billing documents, which are not in the same billing type as the one with error, and found it follow the above logic.
So how come this time it shows the above error? Really confused.
Emma
Edited by: qun yang on Sep 22, 2011 9:12 AM

How to assign status profile to components in service order

Hi,
For my business requirement, I want to assign status to individual components planned in the service order. Even though there is a status button on the component tab, there is no config where I can assign the status profile. We can only assign status profile to the order header and the operations and not to components level.
As SAP has provided the status button in the component tab, I am hoping that there is a way to assign the status to the parts planned.
Your help is much appreciated.
Regards,
Ram.

hi all,
It will be helpful if you give any useful tips on maintaining status for the component level in the service order.
regards,
ram.

How to assign status profile to marketing campaign ?

Dear Friends,
I am working on Marketing Campaign (SAP CRM 4.0) : I want to customize a new status profile for campaign. I create a new one and I don't know where I assign it to camapign : I searched in SDN and I found a message : "to assign status profile, you have to do when you customize campaign type : Marketing -> Marketing Planning and Campaign Management -> Basic Data -> Define Campaign Types/Objectives/Tactics : in this customizing point, when you define campaign type, here is a status profile field".
The problem is I did not find any "status profile" field in this customizing point.
Thanks in advance for your help.

Hi,
Pls follow below said path to create User Status profile
CRM--> Marketing > Marketing Planning and Campaign Management> General Setting --> Change Status Profile for User Status
Once you create Status profile you can see the same in the profile field of Campaign. You will have to assign this profile in the campaign then you can see the statusses in Change Status field,. But these stausses can not over write the system statusses.
Hope this will help..
Rgds
Mallikarjun

Error "Status change from READY to COMMITTED is not allowed"

Dear experts,
once again SAPs workflow environment drives me crazy with mysterious error messages.
Some time ago I posted a question here concerning the problem that I cannot put back a workitem by using function module SAP_WAPI_PUT_BACK_WORKITEM due to a lock on this workitem which has been set right after it has been double clicked in the business workplace workflow inbox:
[How can I put back a workitem before I'm back in the business workplace?;
Since I do not want to dequeue the lock for the workitem in my application (where the user finds the appropriate detail information along with the function buttons for approval, rejection and F3/BACK) I tried it with calling a POPUP_TO_CONFIRM ("Do you want to put back the workitem?") directly from within the BO-method, right after returning from the FM that called my application. From here (the popup then shows in front of the business workplace instead of the application) the locking doesn't seem to be a problem any more! But whatever I do after the users decision to put the WI back - calling the FM SAP_WAPI_PUT_BACK_WORKITEM or trying to leave the method with macro EXIT_CANCELLED - leads to the error message "Status change from READY to COMMITTED is not allowed" and the workitem changes to status ERROR, too. This message seems to be bull***t, since the status of the item is supposed to go back to READY.
Does anybody have experience to help me on that ?
Thanks in advance
regards
Andreas

Hello Andreas,
Ah, sorry, there was so much talk about user decisions that I assumed you were using a standard decision task.
Still, I would be extra careful of changing the way workflow usually works because you have an unknown target audience that are based on the standard.
The standard SAP philosophy is quite simple: cancel/F3 or do nothing and it stays reserved. If you do not want it reserved, you need to perform an action. This is based on a majority of processes: in most cases when you execute a work item you will also be the one who is going to completed it. Replacing it is the lesser used of the two alternatives, therefore it is the only one that requires an action on the part of the user.
Again, this is intended as constructive input. Strange quirks and unusual behaviour tend to add a black mark to software if they do not make things easier to use. In many environments users are not even aware of the reserve/replace business, so there you would be adding an additional layer of complexity.
Personally I would find an exit popup annoying as a regular workflow user - regular decisions can be approved with one click, or I can back out with a single click if I need to make a phone call or look up some info before approving - but with this new-fangled thing I've got an extra button to click and an extra thing to think about. This is especially the case in a payment approval scenario where you may have users in some departments who may approve hundreds of payments each week.
My suggestion would be to leave it like that. By all means put an option into the user decision to put it back or to 'un-reserve' it (and loop round if the user chooses it). That way you are adding value and not clicks.
Cheers,
Mike

Assignment Status Change Requirement.

Similar Messages

Maybe you are looking for