CL20N Status changed: missing values for required chars for ROH & FERT

Dear Expert,
I am getting this message no. CL500 (Status changed: missing values for required chars) when I try to save variant class (Class type 300) assignment to material master (Raw Material) with Released 1 status in CL20N; but I do not get this message during assignment for FERT. I can save a FERT with Released1 status to a variant class without any system message. I am using configurable material in purchasing and this message is not valid in this case. Is there anywhere I can turn off this message for raw material just like FERT?
Regards,
HK

Hello Han Keat,
There are notes for this error message. Can you please check note 1537443 and 1431600 if it is in your system
Thanks Amber

Similar Messages

ORA-23460: missing value for column column name in resolution method

Hi All,
We have implemented bi-directional replication via oracle streams..Oracle 10g 10.2.0.4
We are getting following error in conflict resolution .ORA-23460: missing value for column "ASSIGNED_APPL_USER_ID" in resolution method "<method>" for
"TMADMIN"."PATIENT_VISITS"."REP_UPDATE" ORA-01403: no data found .
Above column ASSIGNED_APPL_USER_ID is NULL column ,We are using MAXIMUM resolution method for update conflict handler .We tried many times on toad the same scenarios and working fine.
We have set supplemental logging on primay and unique columns.
I found many docs on internet and they all said add supplemental logging on all columns.
We did set up like this ...:
DECLARE
COLS DBMS_UTILITY.NAME_ARRAY;
BEGIN
cols(1) := 'STUDY_ID';
cols(2) := 'KENDLE_STUDY_SUB_ID';
cols(3) := 'SITE_ID';
cols(4) := 'PATIENT_ID';
cols(5) := 'VISIT_NUMBER';
cols(6) := 'VISIT_TYPE';
cols(7) := 'VISIT_DATE';
cols(8) := 'CRF_COLLECTION_DATE';
cols(9) := 'DT_CREATED';
cols(10) := 'DT_MODIFIED';
cols(11) := 'MODIFIED_BY';
cols(12) := 'MONITOR_VISIT_DATE';
cols(13) := 'UNSCHEDULED_VISIT_REASON';
cols(14) := 'LAST_SCHEDULED_VISIT_NUMBER';
cols(15) := 'VISIT_DATE_IN_TRIALBASE';
cols(16) := 'PROJECTED_VISIT_DATE';
cols(17) := 'SEND_CERTIFIED_LETTER_YN';
cols(18) := 'ASSIGNED_APPL_USER_ID';
cols(19) := 'DATE_CERTIFIED_LETTER_SENT';
cols(20) := 'DURATION_OF_CALL_IN_MINUTES';
cols(21) := 'COMPLETED_APPL_USER_ID';
cols(22) := 'CALL_STATUS';
cols(23) := 'VISIT_HYPERLINK';
cols(24) := 'NEXT_CALL_DATE';
cols(25) := 'DT_PMNT_REQUESTED_TO_SPONSOR';
cols(26) := 'VISIT_DATE_NAP_YN';
cols(27) := 'MONITOR_VISIT_DATE_NAP_YN';
cols(28) := 'CRF_COLLECTION_DATE_NAP_YN';
cols(29) := 'IMPORTED_SUBJECT_VISIT_DATE';
cols(30) := 'REMINDER_SENT_DATE';
DBMS_APPLY_ADM.SET_UPDATE_CONFLICT_HANDLER(
OBJECT_NAME =>'TMADMIN.PATIENT_VISITS',
METHOD_NAME =>'MAXIMUM',
RESOLUTION_COLUMN =>'DT_MODIFIED',
COLUMN_LIST =>cols);
END;
DT_MODIFIED is our resolution columns......
Any help would be appreciate...
Thanks in advance.
Thanks,
Nick.

You should post this question the Oracle Server forums.
Good luck!
Warm regards.
ashok

Change dropdown values for a field in webdynpro abap

Hi All ,
I need to change dropdown values for a particular field ( Tax code ) in webdynpro component (FITE_VC_RECEIPTS) when selecting expense type. Right now Tax code values are coming with respect to a company code but i need tax code with respect to other company code for two personel numbers .
How can i change dropdown values for this taxcode in webdynpro abap . Please suggest.
Thanks in advance.
Regards,
Sijin K P.

Hi All ,
Thanks for reply .
In production taxcodes are coming fine but wrong in dev and quality . ( Australian taxcodes are coming in production for dropdown values but new zealand tax codes in dev and quality )
I have not started doing any changes . Is there any configuration part to change tax codes that can reflect in expense claim portal . Please help ..
Thanks in advance.
Regards ,
Sijin K P.

Function module to change the value for pricing condition type

Hello experts,
I want to change the value for pricing condition type for an item in the transaction CRMD_ORDER.
I used many function modules but none are working.
Please kindly suggest a function module that will change the value for a condition type .
I have used the following function module but its not working, please correct the coding if anything needs to be changed or added. Please help me .
Thank you.
CLEAR PRCD_COND.
     SELECT SINGLE * FROM PRCD_COND WHERE KPOSN = WA_ORDERADM_I-GUID AND
                                          KSCHL = COND_TY.
IF SY-SUBRC = 0.
*    MOVE-CORRESPONDING PRCD_COND TO L_COND_CHG.
*    CLEAR L_COND_CHG-KBETR.
    L_COND_CHG-STUNR = PRCD_COND-STUNR.
    L_COND_CHG-KBETR = COND_PRC.
*    L_COND_CHG-KSCHL = COND_TY.
    INSERT L_COND_CHG INTO TABLE T_COND_CHG.
L_HEAD_GUID = CRMD_ORDERADM_H-GUID.
L_ITEM_GUID = WA_ORDERADM_I-GUID.
INSERT L_HEAD_GUID INTO TABLE HEAD_GUID.
INSERT L_ITEM_GUID INTO TABLE ITEM_GUID.
    CALL FUNCTION 'CRM_ORDER_READ'
     EXPORTING
       IT_HEADER_GUID                    = HEAD_GUID
       IT_ITEM_GUID                      = ITEM_GUID
     IMPORTING
       ET_ORDERADM_H                     = LT_ORDERADM_H
       ET_ORDERADM_I                     = LT_ORDERADM_I
       ET_PRIDOC                         = IT_PRIDOC_RD
       ET_DOC_FLOW                       = T_DOC_FLOW
*     CHANGING
*       CV_LOG_HANDLE                     =
*     EXCEPTIONS
*       DOCUMENT_NOT_FOUND                = 1
*       ERROR_OCCURRED                    = 2
*       DOCUMENT_LOCKED                   = 3
*       NO_CHANGE_AUTHORITY               = 4
*       NO_DISPLAY_AUTHORITY              = 5
*       NO_CHANGE_ALLOWED                 = 6
*       OTHERS                            = 7
    IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
MOVE-CORRESPONDING LS_PRIDOC_RD TO L_PRI_COND.
INSERT L_PRI_COND INTO TABLE PRI_COND.
LOOP AT IT_PRIDOC_RD INTO LS_PRIDOC_RD.
MOVE-CORRESPONDING LS_PRIDOC_RD TO L_PRIDOC_CHG.
L_PRIDOC_CHG-PRIC_COND = PRI_COND.
L_PRIDOC_CHG-REF_GUID = LS_PRIDOC_RD-GUID.
L_PRIDOC_CHG-COND_CHANGE = T_COND_CHG.
INSERT L_PRIDOC_CHG INTO TABLE PRIDOC_CHG.
ENDLOOP.
LOOP AT LT_ORDERADM_H INTO LS_ORDERADM_H .
MOVE-CORRESPONDING LS_ORDERADM_H TO L_HEADER.
INSERT L_HEADER INTO TABLE HEADER.
ENDLOOP.
LOOP AT LT_ORDERADM_I INTO LS_ORDERADM_I.
MOVE-CORRESPONDING LS_ORDERADM_I TO L_ITEM.
INSERT L_ITEM INTO TABLE ITEM.
ENDLOOP.
L_FIELD-FIELDNAME = 'STUNR'.
INSERT L_FIELD INTO TABLE FIELD.
L_FIELD-FIELDNAME = 'KBETR'.
L_FIELD-CHANGEABLE = 'X'.
INSERT L_FIELD INTO TABLE FIELD.
L_INPUT-FIELD_NAMES = FIELD.
L_INPUT-REF_KIND = 'E'.
L_INPUT-REF_GUID = LS_PRIDOC_RD-GUID.
L_INPUT-OBJECTNAME = 'PRIDOC'.
INSERT L_INPUT INTO TABLE INPUT.
    CALL FUNCTION 'CRM_ORDER_MAINTAIN'
     EXPORTING
       IT_PRIDOC                     = PRIDOC_CHG
     IMPORTING
       ET_EXCEPTION                  = EXCEPT
     CHANGING
       CT_INPUT_FIELDS               = INPUT.
    IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
REFRESH EXCEPT.
CALL FUNCTION 'CRM_ORDER_SAVE'
EXPORTING
    IT_OBJECTS_TO_SAVE         = HEAD_GUID
*   IV_UPDATE_TASK_LOCAL       = FALSE
*   IV_SAVE_FRAME_LOG          = FALSE
*   IV_NO_BDOC_SEND            = FALSE
*   IT_ACTIVE_SWITCH           =
IMPORTING
   ET_SAVED_OBJECTS           = SAVED
   ET_EXCEPTION               = EXCEPT
   ET_OBJECTS_NOT_SAVED       = UNSAVED
* CHANGING
*   CV_LOG_HANDLE              =
* EXCEPTIONS
*   DOCUMENT_NOT_SAVED         = 1
*   OTHERS                     = 2
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
COMMIT WORK AND WAIT.

Hi,,
To be able to call a function module in an update work process, you must flag it in the Function Builder. When you create the function module, set the Process Type attribute to Update with immediate start
Alternatively u can use this function module.
CRM_STATUS_DATA_SAVE_DB
BAPI_CUSTOMERCRM_CHANGE (If u wish to use a bapi for this).
Also , Let me know what error you got when implementing other function module.Does the function module didnt return any error but still the value is not changed for pricing condition type?

Dump when changing the value for a field (of 13 decimals) in alv grid.

Hi Group,
Its giving a dump when user is trying to change the value.
dump description: Unable to interpret "70,000 " as a number.
what is happening here is, the original value is 50,000 and he is deleting 5 and replacing it with 7, here its throwing the dump.
If he removes the complete number 50,000 and then gives 70000 its taking the value.
I tried to use, the decimals options in alv field catalog but to no joy.
Please can you give me an advice on this.
Many Thanks.

the problem is the comma in the 70,000....that's an alpha character.... Normally, we expect SAP to display numeric fields in a appropriate format, based upon their numeric type, but trying to forcibly insert '70,000' into a true numeric-type field can generate an 'unable to interpret xxx,xxxx as number' error.
You could experiment with changing your ALV column to a char17 (or appropriate width) and putting your numeric value into that to display, then converting back to type P, or other field type in the table, in a column that is not displayed, when the user changes the value.... essentially two columns, one not displayed with a routine to copy/convert the numeric field into the alpha field and the reverse when the field is changed.
But, the better solution is probably for the user to understand that they're seeing a formatted numeric field, and that they need to replace the entire value with the only possible punctuation being a decimal and (if necessary) a negative sign.

BAPI_PO_CHANGE does not change LIMIT value for service PO with ref to IDOC

Hi,
I am trying to change the limit values for both ACCTASSCAT (K) and item cat (D ie service PO) with ref to message type PORDCH IDOC type PORDCH02, the IDoc is getting posted but the PO is not getting updated ie LIMIT value is not getting change and returning msg "No data changed".
Could you please provide the way to change LIMIT value.
Regards,
Mojammil Khan

Are you really sure that your IT_SCH has the same fields like POITEM?
the delivery date and statistical delivery date are located in the schedule tab in ME23N and stored in the schedule table EKET, not in EKPO where the PO item data is stored.
I think you should assign your IT_SCH to POSCHEDULE

Change default value for no of records in T code KSB1

Hi,
I am trying change the default value (no of records) in T code KSB1.
Is it defaulted progarmatically or through some configuration?
Any help is appreciated.
Thanks
Govind

Thank you all for immediate reply.
I know that I can create a variant or change the value by hitting more settings.
I have also seen in the program and its hard coded there as 5000.
We need that value to be defulted as 10000.So my question is that can we change via configuration or it can be done only progamatically?
Thanks
Govind

Changing MAXSIZE value for a data file.

Hello, I was wondering if it is possible to change the MAXSIZE value for a data file from UNLIMITED to a specified value, like 4M.
Thank you,
David

This is trhe command that actually did what I wanted:
ALTER DATABASE DATAFILE 'D:\DBDATA\TESTPTIX02.ORA' AUTOEXTEND ON MAXSIZE 3840M;
Thank you all for tour time and help. Have a safe and happ Christmas and new years.
David

Change Commission-value for Commisson-Groups on item/BP-level

Hello,
at the moment it is possible to change the defined commission-% of an commisssion-group for specific items and BP. I was told by the support, that this is not the correct way according system definition and that's the reason why all this individually defined values are overwritten if we update for example BP.
We need this "wrong" behaviour, that allows us to change a commission groups %-value individually, because in our case for specific items or BP this value differs from the groups standard-value but we need to assign the commission-group to an BP for our commission reports.
Best regards,
Thomas

Hi,
According to your description, there are several list views in your list, there is a textbox control which holds the “Single Line of Text” type of data in your custom
form. When users click the “Add new item” button in one of the existing list views, you want the textbox control in the custom form to be populated automatically.
By default, when user clicks the “Add new item” button in a list view, the URL of the custom form page will contain the name of that list view page, thus, a workaround
which requires custom code can be like this:
After the form page loaded, we can extract the name of the list view page from the URL, then populate it into the textbox control immediately. This can be achieved
using jQuery.
About how to
get URL parameters of current page using jQuery:
http://www.jquerybyexample.net/2012/06/get-url-parameters-using-jquery.html
About
adding jQuery into InfoPath form:
http://riteshudupak.blogspot.com/2010/09/add-jquery-to-browser-enabled-infopath.html
Best regards,
Patrick
Patrick Liang
TechNet Community Support

GRC AC 10 - Change default value for field in access request

Hi everybody
in Access request, Is it possible to change the defaut value in the fied "request for" ?
thanks
Aurélien

Hi Aurélien,
Yes we can make it default, please go to EUP and there is a field Request for. please check the snapshot.
Thanks and Regards
Ankit sharma

Changed Ulimits values for the Oracle user and getting error -bash: ulimit: max user processes: cannot modify limit: Operation not permitted when logging in.

I'm trying to increate the ulimits for max user processes and open files for the oracle user. I've set the values in limits.conf, /etc/profile and in oracle's environment scripts. Now when I log in as oracle I get the below errors. If I change the ulimits back to the original values errors go away but ulimits aren't changed.
login as: oracle
[email protected]'s password:
Last login: Fri Mar 6 09:56:02 2015 from mtkadmin12
You are logging onto an Oracle system.
Kickstarted on: 2014-06-05
-bash: ulimit: max user processes: cannot modify limit: Operation not permitted
-bash: ulimit: max user processes: cannot modify limit: Operation not permitted
[oracle@servername ~]$

Thanks for the update.
I modified the /etc/security/limits.d/90-nproc.conf and added a line for oracle and also modifed the oracle.sh file. The ulimits are setting correctly when I su - oracle but they are still wrong when sshing in as oracle.
[root@mtkdevorap11d-1 ~]# su - oracle
[oracle@mtkdevorap11d-1 ~]$ ulimit -Ha
core file size          (blocks, -c) unlimited
data seg size           (kbytes, -d) unlimited
scheduling priority             (-e) 0
file size               (blocks, -f) unlimited
pending signals                 (-i) 1030982
max locked memory       (kbytes, -l) 94371840
max memory size         (kbytes, -m) unlimited
open files                      (-n) 65536
pipe size            (512 bytes, -p) 8
POSIX message queues     (bytes, -q) 819200
real-time priority              (-r) 0
stack size              (kbytes, -s) unlimited
cpu time               (seconds, -t) unlimited
max user processes              (-u) 16384
virtual memory          (kbytes, -v) unlimited
file locks                      (-x) unlimited
[oracle@mtkdevorap11d-1 ~]$
[oracle@mtkdevorap11d-2 ~]$ ssh mtkdevorap11d-1
Last login: Mon Mar 16 13:04:16 2015 from mtkdevorap11d-2.conveydev.com
You are logging onto an Oracle system.
Kickstarted on: 2014-06-05
[oracle@mtkdevorap11d-1 ~]$ ulimit -Ha
core file size          (blocks, -c) unlimited
data seg size           (kbytes, -d) unlimited
scheduling priority             (-e) 0
file size               (blocks, -f) unlimited
pending signals                 (-i) 1030982
max locked memory       (kbytes, -l) 64
max memory size         (kbytes, -m) unlimited
open files                      (-n) 4096
pipe size            (512 bytes, -p) 8
POSIX message queues     (bytes, -q) 819200
real-time priority              (-r) 0
stack size              (kbytes, -s) unlimited
cpu time               (seconds, -t) unlimited
max user processes              (-u) 16384
virtual memory          (kbytes, -v) unlimited
file locks                      (-x) unlimited
[oracle@mtkdevorap11d-1 ~]$

Missing values for BWAPPLNM (Application comp) and BWVORG field in psa

We loaded records in to PSA of 2LIS_02_ITM and 2LIS_02_SCL. However, upon passing through the update rules into 0PUR_C01 and 0PUR_C04, we find that the added records to both these infocubes is 0.
Upon closer examination of the update rules, we came across routines which relied on values in PROCESSKEY (BWVORG) and BWAPPLNM fields. These fields donu2019t have values in the PSA.
Kindly mention if any additional settings or configurations have to be done at ECC and(or) BI side other than BF11 settings so that these values get populated in to the BWVORG and BWAPPLNM fields of 2LIS_02_ITM and 2LIS_02_SCL so that those records can be added to the cubes upon passing through the update rules.
With thanks
sam

Hi,
see in transaction SBIW. There is missing the customzing for industrial sector. Set it to "standard (core)".
=> this you need for purchasing and material inventory.
Sven

Missing values for a year

Hello,
I am trying to load a dimension and all data gets loaded successfully, however when I retrieve the data, I see the all the values are missing for one year only (i.e - all months/Qtrs in 2005 are showing #Missing, but other years are showing correct values).
I have made sure that file had correct data for 2005 and reloaded the file, but I am still not having any luck.
Please help.
Thanks

First clear All data.
Quey the data belongs to year 2005 only by filtering in the SQL query.
Try to load data using rule file and check whether data is getting loaded or not.
This is useful for issue analysis.
Go thru below link further helpful
http://download.oracle.com/docs/cd/E10530_01/doc/epm.931/html_esb_dbag/frameset.htm?ddlload.htm
Edited by: Srinivas Bobbala on Jan 2, 2009 12:43 PM

How can I change the values for print parameters

Hi all,
There is a program which prints the documents every time the t.code is executed. I want the output to be stored in spool and NEVER wants it to be printed.
A spreadsheet which has the details of articles is uploaded and a background job is created through ABAP SUBMIT statement to upload the article numbers to the table.
GET_PRINT_PARAMETERS function module is used. Is there any way to pass the print parameters so that output will not be printed and only stored in the spool?
Help me out and points will be rewarded.

Hi Rathi,
I am more or less giving as you mentioned. Here is the piece of code.
Y_XXXX is my report.
CALL FUNCTION 'GET_PRINT_PARAMETERS'
    EXPORTING
      MODE                   = 'BATCH'
      NO_DIALOG              = 'X'
      REPORT                 = 'Y_XXXX'
    IMPORTING
      OUT_ARCHIVE_PARAMETERS = ls_ArchivePrintParms
      OUT_PARAMETERS         = ls_PrintParms.
SUBMIT Y_XXXX
   AND RETURN
    USER                sy-Uname
    VIA JOB             lw_JobName
        NUMBER          lw_JobNumber
    TO SAP-SPOOL
    WITHOUT SPOOL DYNPRO
    SPOOL PARAMETERS    ls_PrintParms
    ARCHIVE PARAMETERS ls_ArchivePrintParms
    WITH p_Matnr     = ps_CreateArticleDatum-Article
    WITH p_MrchCt    = ps_CreateArticleDatum-MerchCat
    WITH p_ArtTyp    = ps_CreateArticleDatum-ArticleType
    WITH p_ArtCat    = ps_CreateArticleDatum-ArticleCat
    WITH p_UOM       = ps_CreateArticleDatum-UOM
    WITH p_ArtDsc    = ps_CreateArticleDatum-ArticleDesc
    WITH p_ValCls    = ps_CreateArticleDatum-ValueClass
    WITH p_PurGrp    = ps_CreateArticleDatum-PurchGrp
    WITH p_StLsPr    = ps_CreateArticleDatum-StoreListProc
    WITH p_DCLsPr    = ps_CreateArticleDatum-DCListProc
    WITH s_RefStr    IN lr_RefStoresRange
    WITH p_BackGd    = yartc_BooleanFalse
    WITH p_Test      = yartc_BooleanFalse.
But the o/p gets printed everytime I run the t.code.

How to Change Field Status Group pertaining Value in SPRO

Dear Sir,
We are required to change the value for "Cost Center" as sppressed against a GL in the Field Status Group .
We followd following path :
Run Tcode FS00 , giving GL as 351200 , and on "Create/Bank/Interest" Tab double clicked the "Field Status Group" > Double click on "Additional Account Assignment"> Here against the Cost Center it is marked as Suppressed , but we want it to be marked as "Req Entry" .
Kindly guide me , how can this value be changed please .
Regards
B V Mittal

hii
u can do it through obc4.
go to obc4 select the varient. and than go to G004 cost center field statu varient..
go to additional account assignments and than change status to the required field.
Than assign that G004 to GL account.
Thanks
sejal

CL20N Status changed: missing values for required chars for ROH & FERT

Similar Messages

Maybe you are looking for